All the idle routines are called with RCU disabled, as such there must
not be any tracing inside.
While there; clean-up the io-port idle thing.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.251666856@infradead.org
The whole disable-RCU, enable-IRQS dance is very intricate since
changing IRQ state is traced, which depends on RCU.
Add two helpers for the cpuidle case that mirror the entry code:
ct_cpuidle_enter()
ct_cpuidle_exit()
And fix all the cases where the enter/exit dance was buggy.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.130014793@infradead.org
Doing RCU-idle outside the driver, only to then temporarily enable it
again before going idle is suboptimal.
Notably: this converts all dt_init_idle_driver() and
__CPU_PM_CPU_IDLE_ENTER() users for they are inextrably intertwined.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.068981667@infradead.org
Merge an ACPI resource management quirk and an ACPI backlight driver fix
for 6.2-rc4:
- Skip ACPI IRQ override on Asus Expertbook B2402CBA (Tamim Khan).
- Add missing support for manual selection of NVidia-WMI-EC or Apple
GMUX backlight in the kernel command line to the ACPI backlight
driver (Hans de Goede).
* acpi-resource:
ACPI: resource: Skip IRQ override on Asus Expertbook B2402CBA
* acpi-video:
ACPI: video: Allow selecting NVidia-WMI-EC or Apple GMUX backlight from the cmdline
The Dell Latitude E6430 both with and without the optional NVidia dGPU
has a bug in its ACPI tables which is causing Linux to assign the wrong
ACPI fwnode / companion to the pci_device for the i915 iGPU.
Specifically under the PCI root bridge there are these 2 ACPI Device()s :
Scope (_SB.PCI0)
{
Device (GFX0)
{
Name (_ADR, 0x00020000) // _ADR: Address
}
...
Device (VID)
{
Name (_ADR, 0x00020000) // _ADR: Address
...
Method (_DOS, 1, NotSerialized) // _DOS: Disable Output Switching
{
VDP8 = Arg0
VDP1 (One, VDP8)
}
Method (_DOD, 0, NotSerialized) // _DOD: Display Output Devices
{
...
}
...
}
}
The non-functional GFX0 ACPI device is a problem, because this gets
returned as ACPI companion-device by acpi_find_child_device() for the iGPU.
This is a long standing problem and the i915 driver does use the ACPI
companion for some things, but works fine without it.
However since commit 63f534b8ba ("ACPI: PCI: Rework acpi_get_pci_dev()")
acpi_get_pci_dev() relies on the physical-node pointer in the acpi_device
and that is set on the wrong acpi_device because of the wrong
acpi_find_child_device() return. This breaks the ACPI video code,
leading to non working backlight control in some cases.
Add a type.backlight flag, mark ACPI video bus devices with this and make
find_child_checks() return a higher score for children with this flag set,
so that it picks the right companion-device.
Fixes: 63f534b8ba ("ACPI: PCI: Rework acpi_get_pci_dev()")
Co-developed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The patches adding NVidia-WMI-EC and Apple GMUX backlight detection
support to acpi_video_get_backlight_type(), forgot to update
acpi_video_parse_cmdline() to allow manually selecting these from
the commandline.
Add support for these to acpi_video_parse_cmdline().
Fixes: fe7aebb40d ("ACPI: video: Add Nvidia WMI EC brightness control detection (v3)")
Fixes: 21245df307 ("ACPI: video: Add Apple GMUX brightness control detection")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Previously acpi_ns_simple_repair() would crash if expected_btypes
contained any combination of ACPI_RTYPE_NONE with a different type,
e.g | ACPI_RTYPE_INTEGER because of slightly incorrect logic in the
!return_object branch, which wouldn't return AE_AML_NO_RETURN_VALUE
for such cases.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Link: https://github.com/acpica/acpica/pull/811
Fixes: 61db45ca21 ("ACPICA: Restore code that repairs NULL package elements in return values.")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Like the Asus Expertbook B2502CBA and various Asus Vivobook laptops,
the Asus Expertbook B2402CBA has an ACPI DSDT table that describes IRQ 1
as ActiveLow while the kernel overrides it to Edge_High. This prevents the
keyboard from working. To fix this issue, add this laptop to the
skip_override_table so that the kernel does not override IRQ 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216864
Tested-by: zelenat <zelenat@gmail.com>
Signed-off-by: Tamim Khan <tamim@fusetak.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CXL _OSC Error Reporting Control is used by the OS to determine if
Firmware has control of various CXL error reporting capabilities
including the event logs.
Expose the result of negotiating CXL Error Reporting Control in struct
pci_host_bridge for consumption by the CXL drivers.
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: linux-pci@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20221212070627.1372402-2-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent non-operational
ACPI backlight devices from being created on systems where the native
driver does not detect a suitable panel (Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
- Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
and stop using AMD-specific low-power S0 idle code path for systems
with Rembrandt chips and newer (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----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=rSWr
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These are new ACPI IRQ override quirks, low-power S0 idle (S0ix)
support adjustments and ACPI backlight handling fixes, mostly for
platforms using AMD chips.
Specifics:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent
non-operational ACPI backlight devices from being created on
systems where the native driver does not detect a suitable panel
(Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
- Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
and stop using AMD-specific low-power S0 idle code path for systems
with Rembrandt chips and newer (Mario Limonciello)"
* tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
ACPI: video: Fix Apple GMUX backlight detection
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
Compiling with clang-16:
drivers/acpi/acpi_lpit.c:142:6: error: no previous prototype \
for function 'acpi_init_lpit' [-Werror,-Wmissing-prototypes]
drivers/acpi/ioapic.c:212:6: error: no previous prototype \
for function 'pci_ioapic_remove' [-Werror,-Wmissing-prototypes]
drivers/acpi/ioapic.c:229:5: error: no previous prototype \
for function 'acpi_ioapic_remove' [-Werror,-Wmissing-prototypes]
Include "internal.h" to silence them.
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Modify acpi_processor_get_platform_limit() to avoid updating its
frequency QoS request when the _PPC return value has not changed
by comparing that value to the previous _PPC return value stored in
the performance_platform_limit field of the struct acpi_processor
corresponding to the given CPU.
While at it, do the _PPC return value check against the state count
earlier, to avoid setting performance_platform_limit to an invalid
value, and make acpi_processor_ppc_init() use FREQ_QOS_MAX_DEFAULT_VALUE
as the "no limit" frequency QoS for consistency.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When _PPC returns 0, it means that the CPU frequency is not limited by
the platform firmware, so make acpi_processor_get_platform_limit()
update the frequency QoS request used by it to "no limit" in that case.
This addresses a problem with limiting CPU frequency artificially on
some systems after CPU offline/online to the frequency that corresponds
to the first entry in the _PSS return package.
Reported-by: Pratyush Yadav <ptyadav@amazon.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Pratyush Yadav <ptyadav@amazon.de>
The (void *) type pointer does not need to be cast, so don't do
that in lapic_timer_check_state().
Signed-off-by: Zhou jie <zhoujie@nfschina.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_get_handle() uses the pathname argument to find a handle related to
that pathname but it does not need to modify it. Make it const, in order
to be able to pass const pathname to it.
Link: https://github.com/acpica/acpica/pull/773
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Microsoft introduced support in Windows XP for blocking port I/O
to various regions. For Windows compatibility ACPICA has adopted
the same protections and will disallow writes to those
(presumably) the same regions.
On some systems the AML included with the firmware will issue 4 byte
long writes to 0x80. These writes aren't making it over because of this
blockage. The first 4 byte write attempt is rejected, and then
subsequently 1 byte at a time each offset is tried. The first at 0x80
works, but then the next 3 bytes are rejected.
This manifests in bizarre failures for devices that expected the AML to
write all 4 bytes. Trying the same AML on Windows 10 or 11 doesn't hit
this failure and all 4 bytes are written.
Either some of these regions were wrong or some point after Windows XP
some of these regions blocks have been lifted.
In the last 15 years there doesn't seem to be any reports popping up of
this error in the Windows event viewer anymore. There is no documentation
at Microsoft's developer site indicating that Windows ACPI interpreter
blocks these regions. Between the lack of documentation and the fact that
the writes actually do work in Windows 10 and 11, it's quite likely
Windows doesn't actually enforce this anymore.
So to help the issue, only enforce Windows XP specific entries if the
latest _OSI supported is Windows XP. Continue to enforce the
ALWAYS_ILLEGAL entries.
Link: https://github.com/acpica/acpica/pull/817
Fixes: 7f07190390 ("ACPICA: New: I/O port protection")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a pmic_i2c_address entry to intel_pmic_bytcrc.c, so that
intel_soc_pmic_exec_mipi_pmic_seq_element() can be used on
devices with a Bay Trail Crystal Cove PMIC OpRegion driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support for the NVMe Boot Firmware Table (NBFT) to facilitate
booting from NVM Express namespaces which are accessed via
NVMe over Fabrics (NVMe-oF).
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge ACPI resource handling quirks and ACPI backlight handling fixes
for 6.2-rc2:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent non-operational
ACPI backlight devices from being created on systems where the native
driver does not detect a suitable panel (Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
* acpi-resource:
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
* acpi-video:
ACPI: video: Fix Apple GMUX backlight detection
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After we introduced a module parameter and quirk infrastructure for
picking the Microsoft GUID over the SOC vendor GUID we discovered
that lots and lots of systems are getting this wrong.
The table continues to grow, and is becoming unwieldy.
We don't really have any benefit to forcing vendors to populate the
AMD GUID. This is just extra work, and more and more vendors seem
to mess it up. As the Microsoft GUID is used by Windows as well,
it's very likely that it won't be messed up like this.
So drop all the quirks forcing it and the Rembrandt behavior. This
means that Cezanne or later effectively only run the Microsoft GUID
codepath with the exception of HP Elitebook 8*5 G9.
Fixes: fd894f05cf ("ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt")
Cc: stable@vger.kernel.org # 6.1
Reported-by: Benjamin Cheng <ben@bcheng.me>
Reported-by: bilkow@tutanota.com
Reported-by: Paul <paul@zogpog.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2292
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216768
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
HP Elitebook 865 supports both the AMD GUID w/ _REV 2 and Microsoft
GUID with _REV 0. Both have very similar code but the AMD GUID
has a special workaround that is specific to a problem with
spurious wakeups on systems with Qualcomm WLAN.
This is believed to be a bug in the Qualcomm WLAN F/W (it doesn't
affect any other WLAN H/W). If this WLAN firmware is fixed this
quirk can be dropped.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The apple-gmux driver only binds to old GMUX devices which have an
IORESOURCE_IO resource (using inb()/outb()) rather then memory-mapped
IO (IORESOURCE_MEM).
T2 MacBooks use the new style GMUX devices (with IORESOURCE_MEM access),
so these are not supported by the apple-gmux driver. This is not a problem
since they have working ACPI video backlight support.
But the apple_gmux_present() helper only checks if an ACPI device with
the "APP000B" HID is present, causing acpi_video_get_backlight_type()
to return acpi_backlight_apple_gmux disabling the acpi_video backlight
device.
Add a new apple_gmux_backlight_present() helper which checks that
the "APP000B" device actually is an old GMUX device with an IORESOURCE_IO
resource.
This fixes the acpi_video0 backlight no longer registering on T2 MacBooks.
Note people are working to add support for the new style GMUX to Linux:
https://github.com/kekrby/linux-t2/commits/wip/hybrid-graphics
Once this lands this patch should be reverted so that
acpi_video_get_backlight_type() also prefers the gmux on new style GMUX
MacBooks, but for now this is necessary to avoid regressing backlight
control on T2 Macs.
Fixes: 21245df307 ("ACPI: video: Add Apple GMUX brightness control detection")
Reported-and-tested-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Asus ExpertBook B2502 has the same keyboard issue as Asus Vivobook
K3402ZA/K3502ZA. The kernel overrides IRQ 1 to Edge_High when it
should be Active_Low.
This patch adds the ExpertBook B2502 model to the existing
quirk list of Asus laptops with this issue.
Fixes: b5f9223a10 ("ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2142574
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit bfcdf58380 ("ACPI: resource: do IRQ override on LENOVO IdeaPad")
added an override for Lenovo IdeaPad 5 16ALC7. The 14ALC7 variant also
suffers from a broken touchscreen and trackpad.
Fixes: 9946e39fe8 ("ACPI: resource: skip IRQ override on AMD Zen platforms")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216804
Signed-off-by: Adrian Freund <adrian@freund.io>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Schenker XMG CORE 15 (M22) is Ryzen-6 based and needs IRQ overriding
for the keyboard to work. Adding an entry for this laptop to the
override_table makes the internal keyboard functional again.
Signed-off-by: Erik Schumacher <ofenfisch@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI video detection code has a module parameter
`register_backlight_delay` which is currently configured to 8 seconds.
This means that if after 8 seconds of booting no native driver has created
a backlight device then the code will attempt to make an ACPI video
backlight device.
This was intended as a safety mechanism with the backlight overhaul that
occurred in kernel 6.1, but as it doesn't appear necesssary set it to be
disabled by default.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current logic for the ACPI backlight detection will create
a backlight device if no native or vendor drivers have created
8 seconds after the system has booted if the ACPI tables
included backlight control methods.
If the GPU drivers have loaded, they may be able to report whether
any LCD panels were found. Allow using this information to factor
in whether to enable the fallback logic for making an acpi_video0
backlight device.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Avoid trying to resolve operands in AML when there are none (Amadeusz
Sławiński).
- Fix indentation in include/acpi/acpixf.h to help applying patches
from the upstream ACPICA git (Hans de Goede).
- Make it possible to install an address space handler without
evaluating _REG for Operation Regions in the given address space (Hans
de Goede).
- Defer the evaluation of _REG for ECDT described ECs till the matching
EC device in the DSDT gets parsed and acpi_ec_add() gets called for
it (Hans de Goede).
- Fix EC address space handler unregistration (Hans de Goede).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmObX+MSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxZgQP/1kpPLxnqr494PuL9iUROJ+PO26NhKU/
//41rUQBE3ukib8BlAs1TEOjU/4oKWdMf9L4053kyYNRpMdC222HL1ZqkHKzPXM5
wH+NyBiLgjbGaktrLpXu5dt2rClt7GXgKmfCF+TVS/3JW3HKKOXg1Ly1jphwpw/n
GdVvXwQfmh1XyLXvLkMFETMevaHagJIQJb2tSLFN7xOOtmm0qlTlCdCA8eOI40zR
fIWfJEKUX41tOuAufBzHb1/PQ8r0l6Gk7ELpIEC+r6o54+b1xfYRUwx/cUB50pIF
hRKSLCB+Pkbm/L1Z9AJWu0LuWPf7z0p96PTse4K3Fs66fdIuHH3AQ7ezFMTmX06l
sCDa48O6l9/oJT/JMzLERTleRXicxJchPo+C6EQNJsnRWSGuPZYusFHnmrqkgkgg
az56QXs3mJ0naKZ8Kz+ZrOrxdu1rOv5ehBcpeiEphsGE9ujT/DAAlqBbxri9nKvN
VWSoFqDKg5VFP5UnxG3cP9PV73723qusvp/XAW4HLMWVs8Ujr1PtEUE+OK+SxnIx
zC+HA401ziFizsCgvYn2r+ODSHYjRgn8gqHVQm9VPKSSNgWOwN846ttbgxvPCuTW
K9RINJKnCA0QmIU5ooCItTrvpl9mleSeYjQcshKb/kOUW34wtRWZ5SyiNLKGhoKm
N6yIXo/F+lBz
=HlyI
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix an AML byte code execution issue in ACPICA and two issues in
the ACPI EC driver which requires rearranging ACPICA code.
Specifics:
- Avoid trying to resolve operands in AML when there are none
(Amadeusz Sławiński)
- Fix indentation in include/acpi/acpixf.h to help applying patches
from the upstream ACPICA git (Hans de Goede)
- Make it possible to install an address space handler without
evaluating _REG for Operation Regions in the given address space
(Hans de Goede)
- Defer the evaluation of _REG for ECDT described ECs till the
matching EC device in the DSDT gets parsed and acpi_ec_add() gets
called for it (Hans de Goede)
- Fix EC address space handler unregistration (Hans de Goede)"
* tag 'acpi-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Fix ECDT probe ordering issues
ACPI: EC: Fix EC address space handler unregistration
ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps
ACPICA: include/acpi/acpixf.h: Fix indentation
ACPICA: Fix operand resolution
Merge additional ACPI EC driver fixes for 6.2-rc1:
- Fix EC address space handler unregistration (Hans de Goede).
- Defer the evaluation of _REG for ECDT described ECs till the matching
EC device in the DSDT gets parsed and acpi_ec_add() gets called for
it (Hans de Goede).
* acpi-ec:
ACPI: EC: Fix ECDT probe ordering issues
ACPI: EC: Fix EC address space handler unregistration
Merge additional ACPICA changes for 6.2-rc1:
- Avoid trying to resolve operands in AML when there are none (Amadeusz
Sławiński).
- Fix indentation in include/acpi/acpixf.h to help applying patches
from the upstream ACPICA git (Hans de Goede).
- Make it possible to install an address space handler without
evaluating _REG for Operation Regions in the given address space (Hans
de Goede).
* acpica:
ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps
ACPICA: include/acpi/acpixf.h: Fix indentation
ACPICA: Fix operand resolution
- More userfaultfs work from Peter Xu.
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying.
- Some filemap cleanups from Vishal Moola.
- David Hildenbrand added the ability to selftest anon memory COW handling.
- Some cpuset simplifications from Liu Shixin.
- Addition of vmalloc tracing support by Uladzislau Rezki.
- Some pagecache folioifications and simplifications from Matthew Wilcox.
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it.
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword. This series shold have been in the
non-MM tree, my bad.
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages.
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages.
- Peter Xu utilized the PTE marker code for handling swapin errors.
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient.
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand.
- zram support for multiple compression streams from Sergey Senozhatsky.
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway.
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations.
- Vishal Moola removed the try_to_release_page() wrapper.
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache.
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking.
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend.
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range().
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen.
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect.
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages().
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting.
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines.
- Many singleton patches, as usual.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5j6ZwAKCRDdBJ7gKXxA
jkDYAP9qNeVqp9iuHjZNTqzMXkfmJPsw2kmy2P+VdzYVuQRcJgEAgoV9d7oMq4ml
CodAgiA51qwzId3GRytIo/tfWZSezgA=
=d19R
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- More userfaultfs work from Peter Xu
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying
- Some filemap cleanups from Vishal Moola
- David Hildenbrand added the ability to selftest anon memory COW
handling
- Some cpuset simplifications from Liu Shixin
- Addition of vmalloc tracing support by Uladzislau Rezki
- Some pagecache folioifications and simplifications from Matthew
Wilcox
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use
it
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword.
This series should have been in the non-MM tree, my bad
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages
- Peter Xu utilized the PTE marker code for handling swapin errors
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand
- zram support for multiple compression streams from Sergey Senozhatsky
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations
- Vishal Moola removed the try_to_release_page() wrapper
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range()
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages()
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines
- Many singleton patches, as usual
* tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits)
mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio
mm: mmu_gather: allow more than one batch of delayed rmaps
mm: fix typo in struct pglist_data code comment
kmsan: fix memcpy tests
mm: add cond_resched() in swapin_walk_pmd_entry()
mm: do not show fs mm pc for VM_LOCKONFAULT pages
selftests/vm: ksm_functional_tests: fixes for 32bit
selftests/vm: cow: fix compile warning on 32bit
selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions
mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem
mm,thp,rmap: fix races between updates of subpages_mapcount
mm: memcg: fix swapcached stat accounting
mm: add nodes= arg to memory.reclaim
mm: disable top-tier fallback to reclaim on proactive reclaim
selftests: cgroup: make sure reclaim target memcg is unprotected
selftests: cgroup: refactor proactive reclaim code to reclaim_until()
mm: memcg: fix stale protection of reclaim target memcg
mm/mmap: properly unaccount memory on mas_preallocate() failure
omfs: remove ->writepage
jfs: remove ->writepage
...
direction misannotations and (hopefully) preventing
more of the same for the future.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
=bcvF
-----END PGP SIGNATURE-----
Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
drop this forced built-in only configuration by disentangling it from
GHES. Work by Jia He.
- The usual small cleanups and improvements all over EDAC land
-----BEGIN PGP SIGNATURE-----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=DFp8
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Make ghes_edac a simple module like the rest of the EDAC drivers and
drop the forced built-in only configuration by disentangling it from
GHES (Jia He)
- The usual small cleanups and improvements all over EDAC land
* tag 'edac_updates_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper()
EDAC/i5400: Fix typo in comment: vaious -> various
EDAC/mc_sysfs: Increase legacy channel support to 12
MAINTAINERS: Make Mauro EDAC reviewer
MAINTAINERS: Make Manivannan Sadhasivam the maintainer of qcom_edac
EDAC/igen6: Return the correct error type when not the MC owner
apei/ghes: Use xchg_release() for updating new cache slot instead of cmpxchg()
EDAC: Check for GHES preference in the chipset-specific EDAC drivers
EDAC/ghes: Make ghes_edac a proper module
EDAC/ghes: Prepare to make ghes_edac a proper module
EDAC/ghes: Add a notifier for reporting memory errors
efi/cper: Export several helpers for ghes_edac to use
EDAC/i5000: Mark as BROKEN
- Add the cpu_cache_invalidate_memregion() API for cache flushing in
response to physical memory reconfiguration, or memory-side data
invalidation from operations like secure erase or memory-device unlock.
- Add a facility for the kernel to warn about collisions between kernel
and userspace access to PCI configuration registers
- Add support for Restricted CXL Host (RCH) topologies (formerly CXL 1.1)
- Add handling and reporting of CXL errors reported via the PCIe AER
mechanism
- Add support for CXL Persistent Memory Security commands
- Add support for the "XOR" algorithm for CXL host bridge interleave
- Rework / simplify CXL to NVDIMM interactions
- Miscellaneous cleanups and fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY5UpyAAKCRDfioYZHlFs
Z0ttAP4uxCjIibKsFVyexpSgI4vaZqQ9yt9NesmPwonc0XookwD+PlwP6Xc0d0Ox
t0gJ6+pwdh11NRzhcNE1pAaPcJZU4gs=
=HAQk
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for 6.2.
While it may seem backwards, the CXL update this time around includes
some focus on CXL 1.x enabling where the work to date had been with
CXL 2.0 (VH topologies) in mind.
First generation CXL can mostly be supported via BIOS, similar to DDR,
however it became clear there are use cases for OS native CXL error
handling and some CXL 3.0 endpoint features can be deployed on CXL 1.x
hosts (Restricted CXL Host (RCH) topologies). So, this update brings
RCH topologies into the Linux CXL device model.
In support of the ongoing CXL 2.0+ enabling two new core kernel
facilities are added.
One is the ability for the kernel to flag collisions between userspace
access to PCI configuration registers and kernel accesses. This is
brought on by the PCIe Data-Object-Exchange (DOE) facility, a hardware
mailbox over config-cycles.
The other is a cpu_cache_invalidate_memregion() API that maps to
wbinvd_on_all_cpus() on x86. To prevent abuse it is disabled in guest
VMs and architectures that do not support it yet. The CXL paths that
need it, dynamic memory region creation and security commands (erase /
unlock), are disabled when it is not present.
As for the CXL 2.0+ this cycle the subsystem gains support Persistent
Memory Security commands, error handling in response to PCIe AER
notifications, and support for the "XOR" host bridge interleave
algorithm.
Summary:
- Add the cpu_cache_invalidate_memregion() API for cache flushing in
response to physical memory reconfiguration, or memory-side data
invalidation from operations like secure erase or memory-device
unlock.
- Add a facility for the kernel to warn about collisions between
kernel and userspace access to PCI configuration registers
- Add support for Restricted CXL Host (RCH) topologies (formerly CXL
1.1)
- Add handling and reporting of CXL errors reported via the PCIe AER
mechanism
- Add support for CXL Persistent Memory Security commands
- Add support for the "XOR" algorithm for CXL host bridge interleave
- Rework / simplify CXL to NVDIMM interactions
- Miscellaneous cleanups and fixes"
* tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (71 commits)
cxl/region: Fix memdev reuse check
cxl/pci: Remove endian confusion
cxl/pci: Add some type-safety to the AER trace points
cxl/security: Drop security command ioctl uapi
cxl/mbox: Add variable output size validation for internal commands
cxl/mbox: Enable cxl_mbox_send_cmd() users to validate output size
cxl/security: Fix Get Security State output payload endian handling
cxl: update names for interleave ways conversion macros
cxl: update names for interleave granularity conversion macros
cxl/acpi: Warn about an invalid CHBCR in an existing CHBS entry
tools/testing/cxl: Require cache invalidation bypass
cxl/acpi: Fail decoder add if CXIMS for HBIG is missing
cxl/region: Fix spelling mistake "memergion" -> "memregion"
cxl/regs: Fix sparse warning
cxl/acpi: Set ACPI's CXL _OSC to indicate RCD mode support
tools/testing/cxl: Add an RCH topology
cxl/port: Add RCD endpoint port enumeration
cxl/mem: Move devm_cxl_add_endpoint() from cxl_core to cxl_mem
tools/testing/cxl: Add XOR Math support to cxl_test
cxl/acpi: Support CXL XOR Interleave Math (CXIMS)
...
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
* Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki).
* Add support for loong_arch-specific APICs in MADT (Huacai Chen).
* Add support for fixed PCIe wake event (Huacai Chen).
* Add EBDA pointer sanity checks (Vit Kabele).
* Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
* Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
* Add a couple of new UUIDs to the known UUID list (Bob Moore).
* Add support for FFH Opregion special context data (Sudeep Holla).
* Improve warning message for "invalid ACPI name" (Bob Moore).
* Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield).
* Prepare IORT support for revision E.e (Robin Murphy).
* Finish support for the CDAT table (Bob Moore).
* Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki).
* Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao).
* Update the version of the ACPICA code in the kernel (Bob Moore).
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen).
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla).
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong,
Colin Ian King, Sudeep Holla).
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi).
- Add some mew ACPI backlight handling quirks and update some existing
ones (Hans de Goede).
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede).
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König).
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel).
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu).
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede).
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf).
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang ShaoBo).
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen).
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo).
- Fix the PCC mailbox handling error code path (Huisong Li).
- Avoid using PCC Opregions if there is no platform interrupt allocated
for this purpose (Huisong Li).
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen).
- Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng
Wang).
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang).
- Do not disable PNP devices on suspend when they cannot be re-enabled
on resume (Hans de Goede).
- Clean up the ACPI thermal driver a bit (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmOXV10SHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxuOwP/2zew6val2Jf7I/Yxf1iQLlRyGmhFnaH
wpltJvBjlHjAUKnPQ/kLYK9fjuUY5HVgjOE03WpwhFUpmhftYTrSkhoVkJ1Mw9Zl
RNOAEgCG484ThHiTIVp/dMPxrtfuqpdbamhWX3Q51IfXjGW8Vc/lDxIa3k/JQxyq
ko8GFPCoebJrSCfuwaAf2+xSQaf6dq4jpL/rlIk+nYMMB9mQmXhNEhc+l97NaCe8
MyCIGynyNbhGsIlwdHRvTp04EIe8h0Z1+Dyns7g/TrzHj3Aezy7QVZbn8sKdZWa1
W/Ck9QST5tfpDWyr+hUXxUJjEn4Yy+GXjM2xON0EMx5q+JD9XsOpwWOVwTR7CS5s
FwEd6I89SC8OZM86AgMtnGxygjpK24R/kGzHjhG15IQCsypc8Rvzoxl0L0YVoon/
UTkE57GzNWVzu0pY/oXJc2aT7lVqFXMFZ6ft/zHnBRnQmrcIi+xgDO5ni5KxctFN
TVFwbAMCuwVx6IOcVQCZM2g4aJw426KpUn19fKnXvPwR5UIufBaCzSKWMiYrtdXr
O5BM8ElYuyKCWGYEE0GSMjZygyDpyY6ENLH7s7P1IEmFyigBzaaGBbKm108JJq4V
eCWJYTAx8pAptsU/vfuMvEQ1ErfhZ3TTokA5Lv0uPf53VcAnWDb7EAbW6ZGMwFSI
IaV6cv6ILoqO
=GVzp
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and PNP updates from Rafael Wysocki:
"These include new code (for instance, support for the FFH address
space type and support for new firmware data structures in ACPICA),
some new quirks (mostly related to backlight handling and I2C
enumeration), a number of fixes and a fair amount of cleanups all
over.
Specifics:
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
- Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki)
- Add support for loong_arch-specific APICs in MADT (Huacai Chen)
- Add support for fixed PCIe wake event (Huacai Chen)
- Add EBDA pointer sanity checks (Vit Kabele)
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele)
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan)
- Add a couple of new UUIDs to the known UUID list (Bob Moore)
- Add support for FFH Opregion special context data (Sudeep
Holla)
- Improve warning message for "invalid ACPI name" (Bob Moore)
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield)
- Prepare IORT support for revision E.e (Robin Murphy)
- Finish support for the CDAT table (Bob Moore)
- Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki)
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao)
- Update the version of the ACPICA code in the kernel (Bob Moore)
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti)
- Change the return type of the ACPI driver remove callback to void
and update its users accordingly (Dawei Li)
- Add general support for FFH address space type and implement the
low- level part of it for ARM64 (Sudeep Holla)
- Fix stale comments in the ACPI tables parsing code and make it
print more messages related to MADT (Hanjun Guo, Huacai Chen)
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe
JAILLET, Xu Panda)
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen)
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla)
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li
Zhong, Colin Ian King, Sudeep Holla)
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi)
- Add some mew ACPI backlight handling quirks and update some
existing ones (Hans de Goede)
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede)
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König)
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel)
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay
Lu)
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede)
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf)
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang
ShaoBo)
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen)
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo)
- Fix the PCC mailbox handling error code path (Huisong Li)
- Avoid using PCC Opregions if there is no platform interrupt
allocated for this purpose (Huisong Li)
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen)
- Fix some kernel-doc issues in the ACPI GSI processing code
(Xiongfeng Wang)
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang)
- Do not disable PNP devices on suspend when they cannot be
re-enabled on resume (Hans de Goede)
- Clean up the ACPI thermal driver a bit (Rafael Wysocki)"
* tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
ACPI: APEI: EINJ: Refactor available_error_type_show()
ACPI: APEI: EINJ: Fix formatting errors
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
ACPI: processor: perflib: Rearrange unregistration routine
ACPI: processor: perflib: Drop redundant parentheses
ACPI: processor: perflib: Adjust white space
ACPI: processor: idle: Drop unnecessary statements and parens
ACPI: thermal: Adjust critical.flags.valid check
ACPI: fan: Convert to use sysfs_emit_at() API
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPI: battery: Call power_supply_changed() when adding hooks
ACPI: use sysfs_emit() instead of scnprintf()
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
ACPI: APEI: Remove a useless include
PNP: Do not disable devices on suspend when they cannot be re-enabled on resume
ACPI: processor: Silence missing prototype warnings
ACPI: processor_idle: Silence missing prototype warnings
ACPI: PM: Silence missing prototype warning
...
- Core:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for PCI/MSI[-X]
and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows device
manufactures to provide implementation defined storage for MSI messages
contrary to the uniform and specification defined storage mechanisms for
PCI/MSI and PCI/MSI-X. IMS not only allows to overcome the size limitations
of the MSI-X table, but also gives the device manufacturer the freedom to
store the message in arbitrary places, even in host memory which is shared
with the device.
There have been several attempts to glue this into the current MSI code,
but after lengthy discussions it turned out that there is a fundamental
design problem in the current PCI/MSI-X implementation. This needs some
historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management was
completely different from what we have today in the actively developed
architectures. Interrupt management was completely architecture specific
and while there were attempts to create common infrastructure the
commonalities were rudimentary and just providing shared data structures and
interfaces so that drivers could be written in an architecture agnostic
way.
The initial PCI/MSI[-X] support obviously plugged into this model which
resulted in some basic shared infrastructure in the PCI core code for
setting up MSI descriptors, which are a pure software construct for holding
data relevant for a particular MSI interrupt, but the actual association to
Linux interrupts was completely architecture specific. This model is still
supported today to keep museum architectures and notorious stranglers
alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel,
which was creating yet another architecture specific mechanism and resulted
in an unholy mess on top of the existing horrors of x86 interrupt handling.
The x86 interrupt management code was already an incomprehensible maze of
indirections between the CPU vector management, interrupt remapping and the
actual IO/APIC and PCI/MSI[-X] implementation.
At roughly the same time ARM struggled with the ever growing SoC specific
extensions which were glued on top of the architected GIC interrupt
controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86 vector
domain and interrupt remapping and also allowed ARM to handle the zoo of
SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that it is
not available the PCI/MSI[-X] domains have the vector domain as their
parent. This reduced the required interaction between the domains pretty
much to the initialization phase where it is obviously required to
establish the proper parent relation ship in the components of the
hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware
it's clear that the actual PCI/MSI[-X] interrupt controller is not a global
entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the easy
solution of providing "global" PCI/MSI domains which was possible because
the PCI/MSI[-X] handling is uniform across the devices. This also allowed
to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in
turn made it simple to keep the existing architecture specific management
alive.
A similar problem was created in the ARM world with support for IP block
specific message storage. Instead of going all the way to stack a IP block
specific domain on top of the generic MSI domain this ended in a construct
which provides a "global" platform MSI domain which allows overriding the
irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the MSI
infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into the
existing infrastructure. Some of this just works by chance on particular
platforms but will fail in hard to diagnose ways when the driver is used
on platforms where the underlying MSI interrupt management code does not
expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront to
avoid resource exhaustion. They are expanded at run-time when the guest
actually tries to use them. The way how this is implemented is that the
host disables MSI-X and then re-enables it with a larger number of
vectors again. That works by chance because most device drivers set up
all interrupts before the device actually will utilize them. But that's
not universally true because some drivers allocate a large enough number
of vectors but do not utilize them until it's actually required,
e.g. for acceleration support. But at that point other interrupts of the
device might be in active use and the MSI-X disable/enable dance can
just result in losing interrupts and therefore hard to diagnose subtle
problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS
is not longer providing a uniform storage and configuration model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for PCI/IMS.
PCI/IMS has been verified with the work in progress IDXD driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
- Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place
-----BEGIN PGP SIGNATURE-----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=9erA
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt core and driver subsystem:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for
PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows
device manufactures to provide implementation defined storage for MSI
messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified
message store which is uniform accross all devices). The PCI/MSI[-X]
uniformity allowed us to get away with "global" PCI/MSI domains.
IMS not only allows to overcome the size limitations of the MSI-X
table, but also gives the device manufacturer the freedom to store the
message in arbitrary places, even in host memory which is shared with
the device.
There have been several attempts to glue this into the current MSI
code, but after lengthy discussions it turned out that there is a
fundamental design problem in the current PCI/MSI-X implementation.
This needs some historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management
was completely different from what we have today in the actively
developed architectures. Interrupt management was completely
architecture specific and while there were attempts to create common
infrastructure the commonalities were rudimentary and just providing
shared data structures and interfaces so that drivers could be written
in an architecture agnostic way.
The initial PCI/MSI[-X] support obviously plugged into this model
which resulted in some basic shared infrastructure in the PCI core
code for setting up MSI descriptors, which are a pure software
construct for holding data relevant for a particular MSI interrupt,
but the actual association to Linux interrupts was completely
architecture specific. This model is still supported today to keep
museum architectures and notorious stragglers alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the
kernel, which was creating yet another architecture specific mechanism
and resulted in an unholy mess on top of the existing horrors of x86
interrupt handling. The x86 interrupt management code was already an
incomprehensible maze of indirections between the CPU vector
management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X]
implementation.
At roughly the same time ARM struggled with the ever growing SoC
specific extensions which were glued on top of the architected GIC
interrupt controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86
vector domain and interrupt remapping and also allowed ARM to handle
the zoo of SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that
it is not available the PCI/MSI[-X] domains have the vector domain as
their parent. This reduced the required interaction between the
domains pretty much to the initialization phase where it is obviously
required to establish the proper parent relation ship in the
components of the hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the
hardware it's clear that the actual PCI/MSI[-X] interrupt controller
is not a global entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the
easy solution of providing "global" PCI/MSI domains which was possible
because the PCI/MSI[-X] handling is uniform across the devices. This
also allowed to keep the existing PCI/MSI[-X] infrastructure mostly
unchanged which in turn made it simple to keep the existing
architecture specific management alive.
A similar problem was created in the ARM world with support for IP
block specific message storage. Instead of going all the way to stack
a IP block specific domain on top of the generic MSI domain this ended
in a construct which provides a "global" platform MSI domain which
allows overriding the irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the
MSI infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into
the existing infrastructure. Some of this just works by chance on
particular platforms but will fail in hard to diagnose ways when the
driver is used on platforms where the underlying MSI interrupt
management code does not expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront
to avoid resource exhaustion. They are expanded at run-time when the
guest actually tries to use them. The way how this is implemented is
that the host disables MSI-X and then re-enables it with a larger
number of vectors again. That works by chance because most device
drivers set up all interrupts before the device actually will utilize
them. But that's not universally true because some drivers allocate a
large enough number of vectors but do not utilize them until it's
actually required, e.g. for acceleration support. But at that point
other interrupts of the device might be in active use and the MSI-X
disable/enable dance can just result in losing interrupts and
therefore hard to diagnose subtle problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact
that IMS is not longer providing a uniform storage and configuration
model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per
device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for
PCI/IMS. PCI/IMS has been verified with the work in progress IDXD
driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place"
* tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits)
irqchip/ti-sci-inta: Fix kernel doc
irqchip/gic-v2m: Mark a few functions __init
irqchip/gic-v2m: Include arm-gic-common.h
irqchip/irq-mvebu-icu: Fix works by chance pointer assignment
iommu/amd: Enable PCI/IMS
iommu/vt-d: Enable PCI/IMS
x86/apic/msi: Enable PCI/IMS
PCI/MSI: Provide pci_ims_alloc/free_irq()
PCI/MSI: Provide IMS (Interrupt Message Store) support
genirq/msi: Provide constants for PCI/IMS support
x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN
PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X
PCI/MSI: Provide prepare_desc() MSI domain op
PCI/MSI: Split MSI-X descriptor setup
genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN
genirq/msi: Provide msi_domain_alloc_irq_at()
genirq/msi: Provide msi_domain_ops:: Prepare_desc()
genirq/msi: Provide msi_desc:: Msi_data
genirq/msi: Provide struct msi_map
x86/apic/msi: Remove arch_create_remap_msi_irq_domain()
...
Highlights:
- Intel:
- PMC: Add support for Meteor Lake
- Intel On Demand: various updates
- ideapad-laptop:
- Add support for various Fn keys on new models
- Fix touchpad on/off handling in a generic way to avoid having
to add more and more quirks
- android-x86-tablets: Add support for 2 more X86 Android tablet models
- New Dell WMI DDV driver
- Miscellaneous cleanups and small bugfixes
The following is an automated git shortlog grouped by driver:
ACPI:
- battery: Pass battery hook pointer to hook callbacks
ISST:
- Fix typo in comments
Move existing HP drivers to a new hp subdir:
- Move existing HP drivers to a new hp subdir
dell:
- Add new dell-wmi-ddv driver
dell-ddv:
- Warn if ePPID has a suspicious length
- Improve buffer handling
huawei-wmi:
- remove unnecessary member
- fix return value calculation
- do not hard-code sizes
ideapad-laptop:
- Make touchpad_ctrl_via_ec a module option
- Stop writing VPCCMD_W_TOUCHPAD at probe time
- Send KEY_TOUCHPAD_TOGGLE on some models
- Only toggle ps2 aux port on/off on select models
- Do not send KEY_TOUCHPAD* events on probe / resume
- Refactor ideapad_sync_touchpad_state()
- support for more special keys in WMI
- Add new _CFG bit numbers for future use
- Revert "check for touchpad support in _CFG"
intel/pmc:
- Relocate Alder Lake PCH support
- Relocate Tiger Lake PCH support
- Relocate Ice Lake PCH support
- Relocate Cannon Lake Point PCH support
- Relocate Sunrise Point PCH support
- Move variable declarations and definitions to header and core.c
- Replace all the reg_map with init functions
intel/pmc/core:
- Add Meteor Lake support to pmc core driver
intel_scu_ipc:
- fix possible name leak in __intel_scu_ipc_register()
mxm-wmi:
- fix memleak in mxm_wmi_call_mx[ds|mx]()
platform/mellanox:
- mlxbf-pmc: Fix event typo
- Add BlueField-3 support in the tmfifo driver
platform/x86/amd:
- pmc: Add a workaround for an s0i3 issue on Cezanne
platform/x86/amd/pmf:
- pass the struct by reference
platform/x86/dell:
- alienware-wmi: Use sysfs_emit() instead of scnprintf()
platform/x86/intel:
- pmc: Fix repeated word in comment
platform/x86/intel/hid:
- Add module-params for 5 button array + SW_TABLET_MODE reporting
platform/x86/intel/sdsi:
- Add meter certificate support
- Support different GUIDs
- Hide attributes if hardware doesn't support
- Add Intel On Demand text
sony-laptop:
- Convert to use sysfs_emit_at() API
thinkpad_acpi:
- use strstarts()
- Fix max_brightness of thinklight
tools/arch/x86:
- intel_sdsi: Add support for reading meter certificates
- intel_sdsi: Add support for new GUID
- intel_sdsi: Read more On Demand registers
- intel_sdsi: Add Intel On Demand text
- intel_sdsi: Add support for reading state certificates
uv_sysfs:
- Use sysfs_emit() instead of scnprintf()
wireless-hotkey:
- use ACPI HID as phys
x86-android-tablets:
- Add Advantech MICA-071 extra button
- Add Lenovo Yoga Tab 3 (YT3-X90F) charger + fuel-gauge data
- Add Medion Lifetab S10346 data
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmOW+QgUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yAPwf/dAYLHiC2ox5YlNTLX2DvU+jOpeBv
W+EIx4oHQz1+O9jrWMLyvS9zTwTEAf6ANLiMP3damEvtJnB72ClgFITzlJAaB4zN
yj0SdxoBRMt6zDL2QwMkwitvb5kJonLfO2H7NsMwA6f0KP1X8sio3oVRAMMVwlzz
nwDKM/VBpuxmy+d880wRRoAkgRkTsPIOwBkYdo1525NU7kkTmtrMpgM+SXQsHTJn
TB9uQnyuiq5/znh3k1Qn+OGwXQezmGz2Fb76IcW5RzUQDew6n6b3kzILee5ddynT
Pa7/ibwpV+FtZjm2kS/l4tV+WPdA+s5TSWoq7Hz0jzBX9GdOORcMZmEneg==
=z16d
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Intel:
- PMC: Add support for Meteor Lake
- Intel On Demand: various updates
- Ideapad-laptop:
- Add support for various Fn keys on new models
- Fix touchpad on/off handling in a generic way to avoid having to
add more and more quirks
- Android x86 tablets:
- Add support for two more X86 Android tablet models
- New Dell WMI DDV driver
- Miscellaneous cleanups and small bugfixes
* tag 'platform-drivers-x86-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (52 commits)
platform/mellanox: mlxbf-pmc: Fix event typo
platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register()
platform/x86: sony-laptop: Convert to use sysfs_emit_at() API
platform/x86/dell: alienware-wmi: Use sysfs_emit() instead of scnprintf()
platform/x86: uv_sysfs: Use sysfs_emit() instead of scnprintf()
platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
platform/x86: x86-android-tablets: Add Advantech MICA-071 extra button
platform/x86: x86-android-tablets: Add Lenovo Yoga Tab 3 (YT3-X90F) charger + fuel-gauge data
platform/x86: x86-android-tablets: Add Medion Lifetab S10346 data
platform/x86: wireless-hotkey: use ACPI HID as phys
platform/x86/intel/hid: Add module-params for 5 button array + SW_TABLET_MODE reporting
platform/x86: ideapad-laptop: Make touchpad_ctrl_via_ec a module option
platform/x86: ideapad-laptop: Stop writing VPCCMD_W_TOUCHPAD at probe time
platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models
platform/x86: ideapad-laptop: Only toggle ps2 aux port on/off on select models
platform/x86: ideapad-laptop: Do not send KEY_TOUCHPAD* events on probe / resume
platform/x86: ideapad-laptop: Refactor ideapad_sync_touchpad_state()
tools/arch/x86: intel_sdsi: Add support for reading meter certificates
tools/arch/x86: intel_sdsi: Add support for new GUID
tools/arch/x86: intel_sdsi: Read more On Demand registers
...
ACPI:
* Enable FPDT support for boot-time profiling
* Fix CPU PMU probing to work better with PREEMPT_RT
* Update SMMUv3 MSI DeviceID parsing to latest IORT spec
* APMT support for probing Arm CoreSight PMU devices
CPU features:
* Advertise new SVE instructions (v2.1)
* Advertise range prefetch instruction
* Advertise CSSC ("Common Short Sequence Compression") scalar
instructions, adding things like min, max, abs, popcount
* Enable DIT (Data Independent Timing) when running in the kernel
* More conversion of system register fields over to the generated
header
CPU misfeatures:
* Workaround for Cortex-A715 erratum #2645198
Dynamic SCS:
* Support for dynamic shadow call stacks to allow switching at
runtime between Clang's SCS implementation and the CPU's
pointer authentication feature when it is supported (complete
with scary DWARF parser!)
Tracing and debug:
* Remove static ftrace in favour of, err, dynamic ftrace!
* Seperate 'struct ftrace_regs' from 'struct pt_regs' in core
ftrace and existing arch code
* Introduce and implement FTRACE_WITH_ARGS on arm64 to replace
the old FTRACE_WITH_REGS
* Extend 'crashkernel=' parameter with default value and fallback
to placement above 4G physical if initial (low) allocation
fails
SVE:
* Optimisation to avoid disabling SVE unconditionally on syscall
entry and just zeroing the non-shared state on return instead
Exceptions:
* Rework of undefined instruction handling to avoid serialisation
on global lock (this includes emulation of user accesses to the
ID registers)
Perf and PMU:
* Support for TLP filters in Hisilicon's PCIe PMU device
* Support for the DDR PMU present in Amlogic Meson G12 SoCs
* Support for the terribly-named "CoreSight PMU" architecture
from Arm (and Nvidia's implementation of said architecture)
Misc:
* Tighten up our boot protocol for systems with memory above
52 bits physical
* Const-ify static keys to satisty jump label asm constraints
* Trivial FFA driver cleanups in preparation for v1.1 support
* Export the kernel_neon_* APIs as GPL symbols
* Harden our instruction generation routines against
instrumentation
* A bunch of robustness improvements to our arch-specific selftests
* Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmOPLFAQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPRcCACLyDTvkimiqfoPxzzgdkx/6QOvw9s3/mXg
UcTORSZBR1VnYkiMYEKVz/tTfG99dnWtD8/0k/rz48NbhBfsF2sN4ukyBBXVf0zR
fjnaVyVC11LUgBgZKPo6maV+jf/JWf9hJtpPl06KTiPb2Hw2JX4DXg+PeF8t2hGx
NLH4ekQOrlDM8mlsN5mc0YsHbiuO7Xe/NRuet8TsgU4bEvLAwO6bzOLVUMqDQZNq
bQe2ENcGVAzAf7iRJb38lj9qB/5hrQTHRXqLXMSnJyyVjQEwYca0PeJMa7x30bXF
ZZ+xQ8Wq0mxiffZraf6SE34yD4gaYS4Fziw7rqvydC15vYhzJBH1
=hV+2
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights this time are support for dynamically enabling and
disabling Clang's Shadow Call Stack at boot and a long-awaited
optimisation to the way in which we handle the SVE register state on
system call entry to avoid taking unnecessary traps from userspace.
Summary:
ACPI:
- Enable FPDT support for boot-time profiling
- Fix CPU PMU probing to work better with PREEMPT_RT
- Update SMMUv3 MSI DeviceID parsing to latest IORT spec
- APMT support for probing Arm CoreSight PMU devices
CPU features:
- Advertise new SVE instructions (v2.1)
- Advertise range prefetch instruction
- Advertise CSSC ("Common Short Sequence Compression") scalar
instructions, adding things like min, max, abs, popcount
- Enable DIT (Data Independent Timing) when running in the kernel
- More conversion of system register fields over to the generated
header
CPU misfeatures:
- Workaround for Cortex-A715 erratum #2645198
Dynamic SCS:
- Support for dynamic shadow call stacks to allow switching at
runtime between Clang's SCS implementation and the CPU's pointer
authentication feature when it is supported (complete with scary
DWARF parser!)
Tracing and debug:
- Remove static ftrace in favour of, err, dynamic ftrace!
- Seperate 'struct ftrace_regs' from 'struct pt_regs' in core ftrace
and existing arch code
- Introduce and implement FTRACE_WITH_ARGS on arm64 to replace the
old FTRACE_WITH_REGS
- Extend 'crashkernel=' parameter with default value and fallback to
placement above 4G physical if initial (low) allocation fails
SVE:
- Optimisation to avoid disabling SVE unconditionally on syscall
entry and just zeroing the non-shared state on return instead
Exceptions:
- Rework of undefined instruction handling to avoid serialisation on
global lock (this includes emulation of user accesses to the ID
registers)
Perf and PMU:
- Support for TLP filters in Hisilicon's PCIe PMU device
- Support for the DDR PMU present in Amlogic Meson G12 SoCs
- Support for the terribly-named "CoreSight PMU" architecture from
Arm (and Nvidia's implementation of said architecture)
Misc:
- Tighten up our boot protocol for systems with memory above 52 bits
physical
- Const-ify static keys to satisty jump label asm constraints
- Trivial FFA driver cleanups in preparation for v1.1 support
- Export the kernel_neon_* APIs as GPL symbols
- Harden our instruction generation routines against instrumentation
- A bunch of robustness improvements to our arch-specific selftests
- Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (151 commits)
arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK
arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler
arm64: Prohibit instrumentation on arch_stack_walk()
arm64:uprobe fix the uprobe SWBP_INSN in big-endian
arm64: alternatives: add __init/__initconst to some functions/variables
arm_pmu: Drop redundant armpmu->map_event() in armpmu_event_init()
kselftest/arm64: Allow epoll_wait() to return more than one result
kselftest/arm64: Don't drain output while spawning children
kselftest/arm64: Hold fp-stress children until they're all spawned
arm64/sysreg: Remove duplicate definitions from asm/sysreg.h
arm64/sysreg: Convert ID_DFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_DFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_AFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_MMFR5_EL1 to automatic generation
arm64/sysreg: Convert MVFR2_EL1 to automatic generation
arm64/sysreg: Convert MVFR1_EL1 to automatic generation
arm64/sysreg: Convert MVFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR2_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR0_EL1 to automatic generation
...
Merge ACPI fan driver fixes, ACPI PCC driver fixes, miscellaneous ACPI
cleanups and PNP updates for 6.2-rc1:
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen).
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo).
- Fix the PCC mailbox handling error code path (Huisong Li).
- Avoid using PCC Opregions if there is no platform interrupt allocated
for this purpose (Huisong Li).
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen).
- Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng
Wang).
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang).
- Do not disable PNP devices on suspend when they cannot be re-enabled
on resume (Hans de Goede).
* acpi-fan:
ACPI: fan: Convert to use sysfs_emit_at() API
ACPI: fan: Bail out if extract package failed
* acpi-pcc:
mailbox: pcc: Reset pcc_chan_count to zero in case of PCC probe failure
ACPI: PCC: Setup PCC Opregion handler only if platform interrupt is available
* acpi-misc:
ACPI: use sysfs_emit() instead of scnprintf()
ACPI: irq: Fix some kernel-doc issues
* pnp:
PNP: Do not disable devices on suspend when they cannot be re-enabled on resume
PNP: fix name memory leak in pnp_alloc_dev()
Make ACPI APEI updates, x86-specific ACPI updates, ACPI battery driver
fix and ACPI PFRU/T driver fixes for 6.2-rc1:
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König).
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel).
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu).
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede).
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf).
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang ShaoBo).
* acpi-apei:
ACPI: APEI: EINJ: Refactor available_error_type_show()
ACPI: APEI: EINJ: Fix formatting errors
ACPI: APEI: Remove a useless include
ACPI: APEI: Silence missing prototype warnings
apei/ghes: Use xchg_release() for updating new cache slot instead of cmpxchg()
ACPI: APEI: Drop unsetting driver data on remove
* acpi-x86:
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
* acpi-battery:
ACPI: battery: Call power_supply_changed() when adding hooks
* acpi-pfrut:
ACPI: pfr_update: use ACPI_FREE() to free acpi_object
ACPI: pfr_telemetry: use ACPI_FREE() to free acpi_object
Make ACPI power management changes, ACPI processor driver updates, ACPI
EC driver quirk and ACPI backlight driver updates for 6.2-rc1:
- Print full name paths of ACPI power resources objects during
enumeration (Kane Chen).
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla).
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong,
Colin Ian King, Sudeep Holla).
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi).
- Add some mew ACPI backlight handling quirks and update some existing
ones (Hans de Goede).
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede).
* acpi-pm:
ACPI: PM: Silence missing prototype warning
ACPI: PM: Print full name path while adding power resource
* acpi-processor:
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
ACPI: processor: perflib: Rearrange unregistration routine
ACPI: processor: perflib: Drop redundant parentheses
ACPI: processor: perflib: Adjust white space
ACPI: processor: idle: Drop unnecessary statements and parens
ACPI: processor: Silence missing prototype warnings
ACPI: processor_idle: Silence missing prototype warnings
ACPI: processor: throttling: remove variable count
ACPI: processor: idle: Check acpi_fetch_acpi_dev() return value
* acpi-ec:
ACPI: EC: Add quirk for the HP Pavilion Gaming 15-cx0041ur
* acpi-video:
ACPI: video: Prefer native over vendor
ACPI: video: Simplify __acpi_video_get_backlight_type()
ACPI: video: Add force_native quirk for Sony Vaio VPCY11S1E
ACPI: video: Add force_vendor quirk for Sony Vaio PCG-FRV35
ACPI: video: Change Sony Vaio VPCEH3U1E quirk to force_native
ACPI: video: Change GIGABYTE GB-BXBT-2807 quirk to force_none
ACPI: video: Add a few bugtracker links to DMI quirks
Merge ACPI changes related to device enumeration, device object
managenet, operation region handling, table parsing and sysfs
interface:
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
* acpi-scan:
ACPI: scan: substitute empty_zero_page with helper ZERO_PAGE(0)
* acpi-bus:
ACPI: FFH: Silence missing prototype warnings
ACPI: make remove callback of ACPI driver void
ACPI: bus: Fix the _OSC capability check for FFH OpRegion
arm64: Add architecture specific ACPI FFH Opregion callbacks
ACPI: Implement a generic FFH Opregion handler
* acpi-tables:
ACPI: tables: Fix the stale comments for acpi_locate_initial_tables()
ACPI: tables: Print CORE_PIC information when MADT is parsed
* acpi-sysfs:
ACPI: sysfs: use sysfs_emit() to instead of scnprintf()
ACPI: sysfs: Use kstrtobool() instead of strtobool()
Merge ACPICA changes, including bug fixes and cleanups as well as support
for some recently defined data structures, for 6.2-rc1:
- Make acpi_ex_load_op() match upstream implementation (Rafael Wysocki).
- Add support for loong_arch-specific APICs in MADT (Huacai Chen).
- Add support for fixed PCIe wake event (Huacai Chen).
- Add EBDA pointer sanity checks (Vit Kabele).
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
- Add a couple of new UUIDs to the known UUID list (Bob Moore).
- Add support for FFH Opregion special context data (Sudeep Holla).
- Improve warning message for "invalid ACPI name" (Bob Moore).
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT table
(Alison Schofield).
- Prepare IORT support for revision E.e (Robin Murphy).
- Finish support for the CDAT table (Bob Moore).
- Fix error code path in acpi_ds_call_control_method() (Rafael Wysocki).
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li Zetao).
- Update the version of the ACPICA code in the kernel (Bob Moore).
* acpica:
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPICA: Fix error code path in acpi_ds_call_control_method()
ACPICA: Update version to 20221020
ACPICA: Add utcksum.o to the acpidump Makefile
Revert "LoongArch: Provisionally add ACPICA data structures"
ACPICA: Finish support for the CDAT table
ACPICA: IORT: Update for revision E.e
ACPICA: Add CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table
ACPICA: Improve warning message for "invalid ACPI name"
ACPICA: Add support for FFH Opregion special context data
ACPICA: Add a couple of new UUIDs to the known UUID list
ACPICA: iASL: Add CCEL table to both compiler/disassembler
ACPICA: Do not touch VGA memory when EBDA < 1ki_b
ACPICA: Check that EBDA pointer is in valid memory
ACPICA: Events: Support fixed PCIe wake event
ACPICA: MADT: Add loong_arch-specific APICs support
ACPICA: Make acpi_ex_load_op() match upstream
ACPI-2.0 says that the EC OpRegion handler must be available immediately
(like the standard default OpRegion handlers):
Quoting from the ACPI spec version 6.3: "6.5.4 _REG (Region) ...
2. OSPM must make Embedded Controller operation regions, accessed via
the Embedded Controllers described in ECDT, available before executing
any control method. These operation regions may become inaccessible
after OSPM runs _REG(EmbeddedControl, 0)."
So acpi_bus_init() calls acpi_ec_ecdt_probe(), which calls
acpi_install_address_space_handler() to install the EC's OpRegion
handler, early on.
This not only installs the OpRegion handler, but also calls the EC's
_REG method. The _REG method call is a problem because it may rely on
initialization done by the _INI methods of one of the PCI / _SB root devs,
see for example: https://bugzilla.kernel.org/show_bug.cgi?id=214899 .
Generally speaking _REG methods are executed when the ACPI-device they
are part of has a driver bound to it. Where as _INI methods must be
executed at table load time (according to the spec). The problem here
is that the early acpi_install_address_space_handler() call causes
the _REG handler to run too early.
To allow fixing this the ACPICA code now allows to split the OpRegion
handler installation and the executing of _REG into 2 separate steps.
This commit uses this ACPICA functionality to fix the EC probe ordering
by delaying the executing of _REG for ECDT described ECs till the matching
EC device in the DSDT gets parsed and acpi_ec_add() for it gets called.
This moves the calling of _REG for the EC on devices with an ECDT to
the same point in time where it is called on devices without an ECDT table.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214899
Reported-and-tested-by: Johannes Penßel <johannespenssel@posteo.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When an ECDT table is present the EC address space handler gets registered
on the root node. So to unregister it properly the unregister call also
must be done on the root node.
Store the ACPI handle used for the acpi_install_address_space_handler()
call and use te same handle for the acpi_remove_address_space_handler()
call.
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI-2.0 says that the EC op_region handler must be available immediately
(like the standard default op_region handlers):
Quoting from the ACPI spec version 6.3: "6.5.4 _REG (Region) ...
2. OSPM must make Embedded Controller operation regions, accessed via
the Embedded Controllers described in ECDT, available before executing
any control method. These operation regions may become inaccessible
after OSPM runs _REG(EmbeddedControl, 0)."
So the OS must probe the ECDT described EC and install the OpRegion handler
before calling acpi_enable_subsystem() and acpi_initialize_objects().
This is a problem because calling acpi_install_address_space_handler()
does not just install the op_region handler, it also runs the EC's _REG
method. This _REG method may rely on initialization done by the _INI
methods of one of the PCI / _SB root devices.
For the other early/default op_region handlers the op_region handler
install and the _REG execution is split into 2 separate steps:
1. acpi_ev_install_region_handlers(), called early from acpi_load_tables()
2. acpi_ev_initialize_op_regions(), called from acpi_initialize_objects()
To fix the EC op_region issue, add 2 bew functions:
1. acpi_install_address_space_handler_no_reg()
2. acpi_execute_reg_methods()
to allow doing things in 2 steps for other op_region handlers,
like the EC handler, too.
Note that the comment describing acpi_ev_install_region_handlers() even has
an alinea describing this problem. Using the new methods allows users
to avoid this problem.
Link: https://github.com/acpica/acpica/pull/786
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214899
Reported-and-tested-by: Johannes Penßel <johannespenssel@posteo.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In our tests we get UBSAN warning coming from ACPI parser. This is
caused by trying to resolve operands when there is none.
[ 0.000000] Linux version 5.15.0-rc3chromeavsrel1.0.184+ (root@...) (gcc (Ubuntu 10.3.0-1ubuntu1~20.04) 10.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT Sat Oct 16 00:08:27 UTC 2021
...
[ 14.719508] ================================================================================
[ 14.719551] UBSAN: array-index-out-of-bounds in /.../linux/drivers/acpi/acpica/dswexec.c:401:12
[ 14.719594] index -1 is out of range for type 'acpi_operand_object *[9]'
[ 14.719621] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc3chromeavsrel1.0.184+ #1
[ 14.719657] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0214.B50.2009111159 09/11/2020
[ 14.719694] Call Trace:
[ 14.719712] dump_stack_lvl+0x38/0x49
[ 14.719749] dump_stack+0x10/0x12
[ 14.719775] ubsan_epilogue+0x9/0x45
[ 14.719801] __ubsan_handle_out_of_bounds.cold+0x44/0x49
[ 14.719835] acpi_ds_exec_end_op+0x1d7/0x6b5
[ 14.719870] acpi_ps_parse_loop+0x942/0xb34
...
Problem happens because WalkState->NumOperands is 0 and it is used when
trying to access into operands table. Actual code is:
WalkState->Operands [WalkState->NumOperands -1]
which causes out of bound access. Improve the check before above access
to check if ACPI opcode should have any arguments (operands) at all.
Link: https://github.com/acpica/acpica/pull/745
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Medion Lifetab S10346 is a x86 tablet which ships with Android x86 as
factory OS. The Android x86 kernel fork ignores I2C devices described in
the DSDT, except for the PMIC and Audio codecs.
As usual the Medion Lifetab S10346's DSDT contains a bunch of extra I2C
devices which are not actually there, causing various resource conflicts.
Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Medion Lifetab S10346 to
the acpi_quirk_skip_dmi_ids table to woraround this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move error type descriptions into an array and loop over error types
to improve readability and maintainability.
Replace seq_printf() with seq_puts() as recommended by checkpatch.pl.
Signed-off-by: Jay Lu <jaylu102@amd.com>
Co-developed-by: Ben Cheatham <benjamin.cheatham@amd.com>
Signed-off-by: Ben Cheatham <benjamin.cheatham@amd.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Checkpatch reveals warnings and an error due to missing lines and
incorrect indentations. Add the missing lines after declarations and
fix the suspect indentations.
Signed-off-by: Jay Lu <jaylu102@amd.com>
Signed-off-by: Ben Cheatham <benjamin.cheatham@amd.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Avoid returning a confusing error code from acpi_processor_notify_smm()
if it is called for the second time in the case when SMM notification
regarding P-state control is not supported.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rearrange the code in acpi_processor_notify_smm() to consolidate error
handling in it and improve the comments in there while at it.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rearrange acpi_processor_unregister_performance() to follow a more
common error handling pattern and drop a redundant "return" statement
from the end of it.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Drop some redundant parentheses and rearrange some checks using them
in the ACPI processor performance library code for better code clarity.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some inconsistent usage of white space in the ACPI processor performance
library code causes that code to be somewhat harder to read that it
would have been otherwise, so adjust the white space in there to
address that.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Drop a redundant "else", a "return" statement at the end of a void
function and redundant parentheses around an unsigent int variable
name from the ACPI processor idle driver.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is not necessary to compare critical.flags.valid to 1 in
acpi_thermal_trips_update() and doing so is also inconsistent with
other similar checks in that code, so simply check if the flag is
not 0 instead.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- More APCI fixes and improvements for the LoongArch architecture,
adding support for the HTVEC irqchip, suspend-resume, and some
PCI INTx workarounds
- Initial DT support for LoongArch. I'm not even kidding.
- Support for the MTK CIRQv2, a minor deviation from the original version
- Error handling fixes for wpcm450, GIC...
- BE detection for a FSL controller
- Declare the Sifive PLIC as wake-up agnostic
- Simplify fishing out the device data for the ST irqchip
- Mark some data structures as __initconst in the apple-aic driver
- Switch over from strtobool to kstrtobool
- COMPILE_TEST fixes
-----BEGIN PGP SIGNATURE-----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=fhi8
-----END PGP SIGNATURE-----
Merge tag 'irqchip-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates frim Marc Zyngier:
- More APCI fixes and improvements for the LoongArch architecture,
adding support for the HTVEC irqchip, suspend-resume, and some
PCI INTx workarounds
- Initial DT support for LoongArch. I'm not even kidding.
- Support for the MTK CIRQv2, a minor deviation from the original version
- Error handling fixes for wpcm450, GIC...
- BE detection for a FSL controller
- Declare the Sifive PLIC as wake-up agnostic
- Simplify fishing out the device data for the ST irqchip
- Mark some data structures as __initconst in the apple-aic driver
- Switch over from strtobool to kstrtobool
- COMPILE_TEST fixes
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pick up support for "XOR" interleave math when parsing ACPI CFMWS window
structures. Fix up conflicts with the RCH emulation already pending in
cxl/next.
ACPI uses the CXL _OSC support method to communicate the available CXL
functionality to FW. The CXL _OSC support method includes a field to
indicate the OS is capable of RCD mode. FW can potentially change it's
operation depending on the _OSC support method reported by the OS.
The ACPI driver currently only sets the ACPI _OSC support method to
indicate CXL VH mode. Change the capability reported to also include
CXL RCD mode.
[1] CXL3.0 Table 9-26 'Interpretation of CXL _OSC Support Field'
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
[rrichter@amd.com: Reworded patch description.]
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: http://lore.kernel.org/r/Y4cRV/Sj0epVW7bE@rric.localdomain
Link: https://lore.kernel.org/r/166993046717.1882361.10587956243041624761.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pick up:
f350c68e3c ("ACPICA: Add CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table")
...to build the new XOR interleave math support for the CXL Fixed Memory
Window Structures.
Now that cpu_cache_invalidate_memregion() is generically available, use
it to centralize CPU cache management in the nvdimm region driver.
This trades off removing redundant per-dimm CPU cache flushing with an
opportunistic flush on every region disable event to cover the case of
sensitive dirty data in the cache being written back to media after a
secure erase / overwrite event.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166993221550.1995348.16843505129579060258.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
There is an use-after-free reported by KASAN:
BUG: KASAN: use-after-free in acpi_ut_remove_reference+0x3b/0x82
Read of size 1 at addr ffff888112afc460 by task modprobe/2111
CPU: 0 PID: 2111 Comm: modprobe Not tainted 6.1.0-rc7-dirty
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
Call Trace:
<TASK>
kasan_report+0xae/0xe0
acpi_ut_remove_reference+0x3b/0x82
acpi_ut_copy_iobject_to_iobject+0x3be/0x3d5
acpi_ds_store_object_to_local+0x15d/0x3a0
acpi_ex_store+0x78d/0x7fd
acpi_ex_opcode_1A_1T_1R+0xbe4/0xf9b
acpi_ps_parse_aml+0x217/0x8d5
...
</TASK>
The root cause of the problem is that the acpi_operand_object
is freed when acpi_ut_walk_package_tree() fails in
acpi_ut_copy_ipackage_to_ipackage(), lead to repeated release in
acpi_ut_copy_iobject_to_iobject(). The problem was introduced
by "8aa5e56eeb61" commit, this commit is to fix memory leak in
acpi_ut_copy_iobject_to_iobject(), repeatedly adding remove
operation, lead to "acpi_operand_object" used after free.
Fix it by removing acpi_ut_remove_reference() in
acpi_ut_copy_ipackage_to_ipackage(). acpi_ut_copy_ipackage_to_ipackage()
is called to copy an internal package object into another internal
package object, when it fails, the memory of acpi_operand_object
should be freed by the caller.
Fixes: 8aa5e56eeb ("ACPICA: Utilities: Fix memory leak in acpi_ut_copy_iobject_to_iobject")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If a battery hook is added to a battery, userspace software
is not informed that the available properties of the battery
might have changed. This for example causes upower to react
slowly if a new battery hook is added during runtime.
Fix this by calling power_supply_changed() if a battery hook
was successfully added/removed.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the open-code with sysfs_emit() to simplify the code.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Lenovo Yoga Tab 3 Pro (YT3-X90F) is a x86 (Cherry Trail) tablet which
ships with Android x86 as factory OS. The Android x86 kernel fork ignores
I2C devices described in the DSDT, except for the PMIC and Audio codecs.
As usual the Lenovo Yoga Tab 3 Pro's DSDT contains a bunch of extra I2C
devices which are not actually there, causing various resource conflicts.
Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Lenovo Yoga Tab 3 Pro to
the acpi_quirk_skip_dmi_ids table to woraround this.
ACPI_QUIRK_SKIP_I2C_CLIENTS handling uses i2c_acpi_known_good_ids[],
so that PMICs and Audio codecs will still be enumerated properly.
The Lenovo Yoga Tab 3 Pro uses a Whiskey Cove PMIC, add the INT34D3 HID
for this PMIC to the i2c_acpi_known_good_ids[] list.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This file does not use rcu, so there is no point in including
<linux/rculist.h>.
So just remove it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On LoongArch based systems, the PCI devices (e.g. SATA controllers and
PCI-to-PCI bridge controllers) in Loongson chipsets output high-level
interrupt signal to the interrupt controller they are connected (see
Loongson 7A1000 Bridge User Manual v2.00, sec 5.3, "For the bridge chip,
AC97 DMA interrupts are edge triggered, gpio interrupts can be configured
to be level triggered or edge triggered as needed, and the rest of the
interrupts are level triggered and active high."), while the IRQs are
active low from the perspective of PCI (see Conventional PCI spec r3.0,
sec 2.2.6, "Interrupts on PCI are optional and defined as level sensitive,
asserted low."), which means that the interrupt output of PCI devices plugged
into PCI-to-PCI bridges of Loongson chipset will be also converted to high-level.
So high level triggered type is required to be passed to acpi_register_gsi()
when creating mappings for PCI devices.
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221022075955.11726-2-lvjianmin@loongson.cn
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Silence the following warnings when make W=1:
| CC drivers/acpi/apei/apei-base.c
| warning: no previous prototype for 'arch_apei_enable_cmcff' [-Wmissing-prototypes]
| int __weak arch_apei_enable_cmcff(struct acpi_hest_header *hest_hdr,
| ^
| CC drivers/acpi/apei/apei-base.c
| warning: no previous prototype for 'arch_apei_report_mem_error' [-Wmissing-prototypes]
| void __weak arch_apei_report_mem_error(int sev,
| ^
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bail out if we extract the _FIF package failed, or we will end
of referencing the garbage information in fields[], the fan control
will be in mess, fix it.
Fiexes: d445571fa3 ("ACPI: fan: Optimize struct acpi_fan_fif")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_evaluate_dsm_typed()/acpi_evaluate_dsm() should be coupled with
ACPI_FREE() to free the ACPI memory, because we need to track the
allocation of acpi_object when ACPI_DBG_TRACK_ALLOCATIONS enabled,
so use ACPI_FREE() instead of kfree().
Fixes: 0db89fa243 ("ACPI: Introduce Platform Firmware Runtime Update device driver")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_evaluate_dsm_typed()/acpi_evaluate_dsm() should be coupled
with ACPI_FREE() to free the ACPI memory, because we need to
track the allocation of acpi_object when ACPI_DBG_TRACK_ALLOCATIONS
enabled, so use ACPI_FREE() instead of kfree().
Fixes: b0013e037a ("ACPI: Introduce Platform Firmware Runtime Telemetry driver")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For bus-based driver, device removal is implemented as:
1 device_remove()->
2 bus->remove()->
3 driver->remove()
Driver core needs no inform from callee(bus driver) about the
result of remove callback. In that case, commit fc7a6209d5
("bus: Make remove callback return void") forces bus_type::remove
be void-returned.
Now we have the situation that both 1 & 2 of calling chain are
void-returned, so it does not make much sense for 3(driver->remove)
to return non-void to its caller.
So the basic idea behind this change is making remove() callback of
any bus-based driver to be void-returned.
This change, for itself, is for device drivers based on acpi-bus.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for drivers/platform/surface/*
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, PCC OpRegion handler depends on the availability of platform
interrupt to be functional currently. If it is not available, the OpRegion
can't be executed successfully or the desired outcome won't be possible.
So let's reject setting up the PCC OpRegion handler on the platform if
it doesn't support or have platform interrupt available.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As per the ACPI specification(vide section Platform-Wide OSPM Capabilities)
the OSPM must set this bit to indicate support for the usage of Functional
Fixed Hardware (FFixedHW) Operation Regions rather than the firmware as
expected in the code.
Update the check accordingly to reflect the requirement as stated in the
specification.
Reported-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In a system with a single initiator node, and one or more memory-only
'target' nodes, the memory-only node(s) would fail to register their
initiator node correctly. i.e. in sysfs:
# ls /sys/devices/system/node/node0/access0/targets/
node0
Where as the correct behavior should be:
# ls /sys/devices/system/node/node0/access0/targets/
node0 node1
This happened because hmat_register_target_initiators() uses list_sort()
to sort the initiator list, but the sort comparision function
(initiator_cmp()) is overloaded to also set the node mask's bits.
In a system with a single initiator, the list is singular, and list_sort
elides the comparision helper call. Thus the node mask never gets set,
and the subsequent search for the best initiator comes up empty.
Add a new helper to consume the sorted initiator list, and generate the
nodemask, decoupling it from the overloaded initiator_cmp() comparision
callback. This prevents the singular list corner case naturally, and
makes the code easier to follow as well.
Cc: <stable@vger.kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Chris Piper <chris.d.piper@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20221116-acpi_hmat_fix-v2-2-3712569be691@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In hmat_register_target_initiators(), the variable 'best' gets
initialized in the outer per-locality-type for loop. The initialization
just before setting up 'Access 1' targets was unnecessary. Remove it.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20221116-acpi_hmat_fix-v2-1-3712569be691@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When available prefer native backlight control over vendor backlight
control.
Testing has shown that there are quite a few laptop models which rely
on native backlight control (they don't have ACPI video bus backlight
control) and on which acpi_osi_is_win8() returns false.
Currently __acpi_video_get_backlight_type() returns vendor on these
laptops, leading to an empty /sys/class/backlight.
As a workaround for this acpi_video_backlight_use_native() has been
temporarily changed to always return true.
This re-introduces the problem of having multiple backlight
devices under /sys/class/backlight for a single panel.
Change __acpi_video_get_backlight_type() to prefer native over vendor
when available. So that it returns native on these models.
And change acpi_video_backlight_use_native() back to only return
true when __acpi_video_get_backlight_type() returns native.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Simplify __acpi_video_get_backlight_type() removing a nested if which
makes the flow harder to follow.
This also results in having only 1 exit point with
return acpi_backlight_native instead of 2.
Note this drops the (video_caps & ACPI_VIDEO_BACKLIGHT) check from
the if (acpi_osi_is_win8() && native_available) return native path.
Windows 8's hardware certification requirements include that there must
be ACPI video bus backlight control, so the ACPI_VIDEO_BACKLIGHT check
is redundant.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Sony Vaio VPCY11S1E advertises both native and ACPI video backlight
control interfaces, but only the native interface works and the default
heuristics end up picking ACPI video on this model.
Add a video_detect_force_native DMI quirk for this.
Reported-by: Stefan Joosten <stefan@atcomputing.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Sony Vaio PCG-FRV35 advertises both native and vendor backlight
control interfaces. With the upcoming changes to prefer native over
vendor acpi_video_get_backlight_type() will start returning native on
these laptops.
But the native radeon_bl0 interface does not work, where as the sony
vendor interface does work. Add a quirk to force use of the vendor
interface.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to: https://bugzilla.kernel.org/show_bug.cgi?id=202401
the Sony Vaio VPCEH3U1E quirk was added to disable the acpi_video0
backlight interface because that was not working, so that userspace
will pick the actually working native nv_backlight interface instead.
With the new kernel behavior of hiding native interfaces unless
acpi_video_get_backlight_type() returns native, the current
video_detect_force_vendor quirk will cause the working nv_backlight
interface will be disabled too.
Change the quirk to video_detect_force_native to get the desired
result of only registering the nv_backlight interface.
After this all currently remaining force_vendor quirks in
video_detect_dmi_table[] are there to prefer a vendor interface over
a non working ACPI video interface, add a comment to document this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The GIGABYTE GB-BXBT-2807 DMI quirk was added by
commit 25417185e9 ("ACPI: video: Add DMI quirk for GIGABYTE
GB-BXBT-2807") which says the following in its commit message:
"The GIGABYTE GB-BXBT-2807 is a mini-PC which uses off the shelf
components, like an Intel GPU which is meant for mobile systems.
As such, it, by default, has a backlight controller exposed.
Unfortunately, the backlight controller only confuses userspace, which
sees the existence of a backlight device node and has the unrealistic
belief that there is actually a backlight there!
Add a DMI quirk to force the backlight off on this system."
So in essence this quirk was using a video_detect_force_vendor quirk
to disable backlight control. Now a days we have a specific "none"
backlight type for this. Change the quirk to video_detect_force_none
and group it together with the other force_none quirks.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a couple of missing bugtracker links to DMI quirks
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Right now, is impossible for battery hook callbacks
to access instance-specific data, forcing most drivers
to provide some sort of global state. This however is
difficult for drivers which can be instantiated multiple
times and/or are hotplug-capable.
Pass a pointer to the battery hook to those callbacks
for usage with container_of().
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220927204521.601887-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add missing kerneldoc and fix alignment on one of the arguments of
apmt_add_platform_device function.
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Link: https://lore.kernel.org/r/20221111234323.16182-1-bwicaksono@nvidia.com
[will: Fixed up additional indentation issue]
Signed-off-by: Will Deacon <will@kernel.org>
This registers the FFH OpRegion handler before ACPI tables are
loaded. The platform support for the same is checked via Platform-Wide
OSPM Capabilities(OSC) before registering the OpRegion handler.
It relies on the special context data passed to offset and the length.
However the interpretation of the values is platform/architecture
specific. This generic handler just passed all the information to
the platform/architecture specific callback. It also implements the
default callbacks which return as not supported.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With CXL security features, and CXL dynamic provisioning, global CPU
cache flushing nvdimm requirements are no longer specific to that
subsystem, even beyond the scope of security_ops. CXL will need such
semantics for features not necessarily limited to persistent memory.
The functionality this is enabling is to be able to instantaneously
secure erase potentially terabytes of memory at once and the kernel
needs to be sure that none of the data from before the erase is still
present in the cache. It is also used when unlocking a memory device
where speculative reads and firmware accesses could have cached poison
from before the device was unlocked. Lastly this facility is used when
mapping new devices, or new capacity into an established physical
address range. I.e. when the driver switches DeviceA mapping AddressX to
DeviceB mapping AddressX then any cached data from DeviceA:AddressX
needs to be invalidated.
This capability is typically only used once per-boot (for unlock), or
once per bare metal provisioning event (secure erase), like when handing
off the system to another tenant or decommissioning a device. It may
also be used for dynamic CXL region provisioning.
Users must first call cpu_cache_has_invalidate_memregion() to know
whether this functionality is available on the architecture. On x86 this
respects the constraints of when wbinvd() is tolerable. It is already
the case that wbinvd() is problematic to allow in VMs due its global
performance impact and KVM, for example, has been known to just trap and
ignore the call. With confidential computing guest execution of wbinvd()
may even trigger an exception. Given guests should not be messing with
the bare metal address map via CXL configuration changes
cpu_cache_has_invalidate_memregion() returns false in VMs.
While this global cache invalidation facility, is exported to modules,
since NVDIMM and CXL support can be built as a module, it is not for
general use. The intent is that this facility is not available outside
of specific "device-memory" use cases. To make that expectation as clear
as possible the API is scoped to a new "DEVMEM" module namespace that
only the NVDIMM and CXL subsystems are expected to import.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Tested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
FPDT provides some boot timing records useful for analyzing
parts of the UEFI boot stack. Given the existing code works
on arm64, and allows reading the values without utilizing
/dev/mem it seems like a good idea to turn it on.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20221109174720.203723-1-jeremy.linton@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
While debugging a boot-time issue, it's hard to know what ACPI power
resource the kernel is initializing.
It's very helpful to print the full name path of the power resource
being added so that it is not necessary to guess which one it is,
especially on a system with 2 ore more power resources where the
last name path segment is the same.
Before:
ACPI: PM: Power Resource [RTD3]
ACPI: PM: Power Resource [RTD3]
ACPI: PM: Power Resource [PR00]
ACPI: PM: Power Resource [PR01]
After:
ACPI: \_SB_.PCI0.RP01.RTD3: New power resource
ACPI: \_SB_.PCI0.RP08.RTD3: New power resource
ACPI: \_SB_.PCI0.I2C3.H016.PR00: New power resource
ACPI: \_SB_.PCI0.SPI1.CRFP.PR01: New power resource
Signed-off-by: Kane Chen <kane.chen@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace scnprintf() with sysfs_emit() to simplify the code.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The following commit change the second parameter of acpi_set_irq_model()
but forgot to update the function description. Let's fix it.
commit 7327b16f5f ("APCI: irq: Add support for multiple GSI domains")
Also add description of parameter 'gsi' for
acpi_get_irq_source_fwhandle() to avoid the following build W=1 warning.
drivers/acpi/irq.c:108: warning: Function parameter or member 'gsi' not described in 'acpi_get_irq_source_fwhandle'
Fixes: 7327b16f5f ("APCI: irq: Add support for multiple GSI domains")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
sdt_entry[] is long gone by commit ceb6c46839 ("ACPICA: Remove
duplicate table manager"), update the comments to avoid confusion.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The priority of hotplug memory callback is defined in a different file.
And there are some callers using numbers directly. Collect them together
into include/linux/memory.h for easy reading. This allows us to sort
their priorities more intuitively without additional comments.
Link: https://lkml.kernel.org/r/20220923033347.3935160-9-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Waiman Long <longman@redhat.com>
Cc: zefan li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 76ae847497 ("Documentation: raise minimum supported version of
GCC to 5.1") updated the minimum gcc version to 5.1. So the problem
mentioned in f02c696800 ("include/linux/memory.h: implement
register_hotmemory_notifier()") no longer exist. So we can now switch to
use hotplug_memory_notifier() directly rather than
register_hotmemory_notifier().
Link: https://lkml.kernel.org/r/20220923033347.3935160-7-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Waiman Long <longman@redhat.com>
Cc: zefan li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A use-after-free in acpi_ps_parse_aml() after a failing invocaion of
acpi_ds_call_control_method() is reported by KASAN [1] and code
inspection reveals that next_walk_state pushed to the thread by
acpi_ds_create_walk_state() is freed on errors, but it is not popped
from the thread beforehand. Thus acpi_ds_get_current_walk_state()
called by acpi_ps_parse_aml() subsequently returns it as the new
walk state which is incorrect.
To address this, make acpi_ds_call_control_method() call
acpi_ds_pop_walk_state() to pop next_walk_state from the thread before
returning an error.
Link: https://lore.kernel.org/linux-acpi/20221019073443.248215-1-chenzhongjin@huawei.com/ # [1]
Reported-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Chen Zhongjin <chenzhongjin@huawei.com>
Highlights:
- ACPI: video: Fix regressions from 6.1 backlight refactor by making
acpi_video_backlight_use_native() always return true for now
- Misc. other bugfixes and HW id additions
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Add backlight=native DMI quirk for Dell G15 5515
- video: Make acpi_video_backlight_use_native() always return true
- video: Improve Chromebook checks
hp_wmi:
- Fix rfkill causing soft blocked wifi
ideapad-laptop:
- Disable touchpad_switch
p2sb:
- Don't fail if unknown CPU is found
platform/x86/intel/hid:
- Add some ACPI device IDs
platform/x86/intel/pmt:
- Sapphire Rapids PMT errata fix
touchscreen_dmi:
- Add info for the RCA Cambio W101 v2 2-in-1
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmNo7hsUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9y08wf/Q+GL05jx3uVprDmoQljc3DJnHCut
haa/ZHsqq6OY2RYeY4mX1iYOzlRD20nDEQ52/2IOXvx2FOEorDewByGHD7gOJ6Xr
IvI0JTmfPZ4yflW/N+z2ujXYpp/XlELzHEXFBA6t+62NOT0y4fu2mJx95twDgsa0
ohgTVtmSqIwhjJVt+pQ2UVdy2M+Yv07XabZswLTPt6JZJRhvu8UzPu+DkQd0qqKi
tvmFMkYVSkJnEKBT07Ii+QiUxXDKDzfwRPBFxSEm7m3GvkkPJp0ZqmrB9m8mK6oJ
f83FZ8X9vcTGaG5Gjm3X5xejs4B2qeBs9AzhsrAW/maKOADsbjJdJPz7JQ==
=aes0
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"The most important fixes here are a set of fixes for the ACPI
backlight detection refactor which landed in 6.1.
These fix regressions reported on some laptop models by making
acpi_video_backlight_use_native() always return true for now, which in
essence undoes some of the changes.
I plan to take another shot at having only 1 /sys/class/backlight
class device per panel with 6.2, with modified detection heuristics to
avoid the (known) regressions.
Highlights:
- ACPI: video: Fix regressions from 6.1 backlight refactor by making
acpi_video_backlight_use_native() always return true for now
- Misc other bugfixes and HW id additions"
* tag 'platform-drivers-x86-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: p2sb: Don't fail if unknown CPU is found
platform/x86/intel/hid: Add some ACPI device IDs
platform/x86/intel/pmt: Sapphire Rapids PMT errata fix
platform/x86: hp_wmi: Fix rfkill causing soft blocked wifi
platform/x86: touchscreen_dmi: Add info for the RCA Cambio W101 v2 2-in-1
platform/x86: ideapad-laptop: Disable touchpad_switch
ACPI: video: Add backlight=native DMI quirk for Dell G15 5515
ACPI: video: Make acpi_video_backlight_use_native() always return true
ACPI: video: Improve Chromebook checks
IORT E.e now allows SMMUv3 nodes to describe the DeviceID for MSIs
independently of wired GSIVs, where the previous oddly-restrictive
definition meant that an SMMU without PRI support had to provide a
DeviceID even if it didn't support MSIs either. Support this, with
the usual temporary flag definition while the real one is making
its way through ACPICA.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/4b3e2ead4f392d1a47a7528da119d57918e5d806.1664392886.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
ARM Performance Monitoring Unit Table describes the properties of PMU
support in ARM-based system. The APMT table contains a list of nodes,
each represents a PMU in the system that conforms to ARM CoreSight PMU
architecture. The properties of each node include information required
to access the PMU (e.g. MMIO base address, interrupt number) and also
identification. For more detailed information, please refer to the
specification below:
* APMT: https://developer.arm.com/documentation/den0117/latest
* ARM Coresight PMU:
https://developer.arm.com/documentation/ihi0091/latest
The initial support adds the detection of APMT table and generic
infrastructure to create platform devices for ARM CoreSight PMUs.
Similar to IORT the root pointer of APMT is preserved during runtime
and each PMU platform device is given a pointer to the corresponding
APMT node.
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220929002834.32664-1-bwicaksono@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The Dell G15 5515 has the WMI interface (and WMI call returns) expected
by the nvidia-wmi-ec-backlight interface. But the backlight class device
registered by the nvidia-wmi-ec-backlight driver does not actually work.
The amdgpu_bl0 native GPU backlight class device does actually work,
add a backlight=native DMI quirk for this.
Reported-by: Iris <pawel.js@protonmail.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
- Add a comment that this needs to be revisited when dynamic-mux
support gets added (suggested by: Daniel Dadap)
Testing has shown that there are quite a few laptop models which rely
on native backlight control and which do not support ACPI video bus
backlight control, causing __acpi_video_get_backlight_type() to return
vendor. Known Windows laptop models affected by this are:
Acer Aspire 1640
HP Compaq nc6120
IBM ThinkPad X40
System76 Starling Star1
and the following MacBook models are affected too:
Apple MacBook 2.1
Apple MacBook 4.1
Apple MacBook Pro 7.1
the list of affected Windows laptop models is likely just the top of
the iceberg. So for now lets undo the change to not register native
backlight class devices when __acpi_video_get_backlight_type() != native.
Since as part of the backlight-detect refactor the detection code now
relies on the GPU drivers calling acpi_video_backlight_use_native() to
learn that native backlight support is available we cannot just remove
the acpi_video_backlight_use_native() calls from the GPU drivers.
Instead modify acpi_video_backlight_use_native() to always return true
for now. This is meant as a temporary work-around, which will be removed
again when the heuristics from __acpi_video_get_backlight_type() have
been improved so that they will return native on affected models.
Reported-by: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: John Warriner <taijitu@cox.net>
Reported-by: Scott Ostrander <sos12_3@hotmail.com>
Reported-by: Matthias Rampke <matthias.rampke@googlemail.com>
Reported-by: Milan Hodoscek <hmilan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2 improvements for the Chromebook handling in
acpi_video_get_backlight_type():
1. Also check for the "GOOG000C" ACPI HID used on some models
2. Move the Chromebook check to above the ACPI-video check normally
Chromebooks don't have ACPI video backlight support, but when
flashed with upstream coreboot builds they may have ACPI video
backlight support, but native should still be used/preferred then.
Suggested-by: Mr. Chromebox <mrchromebox@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
- Fix region creation crash with pass-through decoders
- Fix region creation crash when no decoder allocation fails
- Fix region creation crash when scanning regions to enforce the
increasing physical address order constraint that CXL mandates
- Fix a memory leak for cxl_pmem_region objects, track 1:N instead of
1:1 memory-device-to-region associations.
- Fix a memory leak for cxl_region objects when regions with active
targets are deleted
- Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window)
emulated proximity domains.
- Fix region creation failure for switch attached devices downstream of
a single-port host-bridge
- Fix false positive memory leak of cxl_region objects by recycling
recently used region ids rather than freeing them
- Add regression test infrastructure for a pass-through decoder
configuration
- Fix some mailbox payload handling corner cases
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY2f0dwAKCRDfioYZHlFs
Z93zAQCHzy4qbEdw95SPQ/BpUJ2rxcWzruFZkaUTU1RHM5lApwEApP9Fjvdkgo9I
dlQTRON1nSqqoEXqSxbt8RU0I9Z11ws=
=pBN4
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"Several fixes for CXL region creation crashes, leaks and failures.
This is mainly fallout from the original implementation of dynamic CXL
region creation (instantiate new physical memory pools) that arrived
in v6.0-rc1.
Given the theme of "failures in the presence of pass-through decoders"
this also includes new regression test infrastructure for that case.
Summary:
- Fix region creation crash with pass-through decoders
- Fix region creation crash when no decoder allocation fails
- Fix region creation crash when scanning regions to enforce the
increasing physical address order constraint that CXL mandates
- Fix a memory leak for cxl_pmem_region objects, track 1:N instead of
1:1 memory-device-to-region associations.
- Fix a memory leak for cxl_region objects when regions with active
targets are deleted
- Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window)
emulated proximity domains.
- Fix region creation failure for switch attached devices downstream
of a single-port host-bridge
- Fix false positive memory leak of cxl_region objects by recycling
recently used region ids rather than freeing them
- Add regression test infrastructure for a pass-through decoder
configuration
- Fix some mailbox payload handling corner cases"
* tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Recycle region ids
cxl/region: Fix 'distance' calculation with passthrough ports
tools/testing/cxl: Add a single-port host-bridge regression config
tools/testing/cxl: Fix some error exits
cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak
cxl/region: Fix cxl_region leak, cleanup targets at region delete
cxl/region: Fix region HPA ordering validation
cxl/pmem: Use size_add() against integer overflow
cxl/region: Fix decoder allocation crash
ACPI: NUMA: Add CXL CFMWS 'nodes' to the possible nodes set
cxl/pmem: Fix failure to account for 8 byte header for writes to the device LSA.
cxl/region: Fix null pointer dereference due to pass through decoder commit
cxl/mbox: Add a check on input payload size
Not all zero page implementations use empty_zero_page global pointer so
let's substitute empty_zero_page occurence with helper ZERO_PAGE(0).
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Added GPE quirk entry for the HP Pavilion Gaming 15-cx0041ur.
There is a quirk entry for the 15-cx0xxx laptops, but this one has
different DMI_PRODUCT_NAME.
Notably backlight keys and other ACPI events now function correctly.
Signed-off-by: Mia Kanashi <chad@redpilled.dev>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When MADT is parsed, print CORE_PIC information as below:
ACPI: CORE PIC (processor_id[0x00] core_id[0x00] enabled)
ACPI: CORE PIC (processor_id[0x01] core_id[0x01] enabled)
...
ACPI: CORE PIC (processor_id[0xff] core_id[0xff] enabled)
This debug information will be very helpful to bring up early systems to
see if processor_id and core_id are matched or not as spec defined.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix the documentation of the *_match_string() family of functions to
properly cover the return value (Andy Shevchenko).
- Fix a possible integer overflow during multiplication in the ACPI
PCC code (Manank Patel).
- Make the ACPI device resources code skip IRQ override on Asus
Vivobook S5602ZA (Tamim Khan).
- Add LATT2021 to the list of device IDs that are ignored when
returned by _DEP, because there are no drivers for them in the
kernel and no plans to add such drivers (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=OG6y
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and device properties fixes from Rafael Wysocki:
"These fix device properties documentation and the ACPI PCC code, add a
new IRQ override quirk for resource handling and add one more item to
the list of device IDs to be ignored when returned by _DEP.
Specifics:
- Fix the documentation of the *_match_string() family of functions
to properly cover the return value (Andy Shevchenko)
- Fix a possible integer overflow during multiplication in the ACPI
PCC code (Manank Patel)
- Make the ACPI device resources code skip IRQ override on Asus
Vivobook S5602ZA (Tamim Khan)
- Add LATT2021 to the list of device IDs that are ignored when
returned by _DEP, because there are no drivers for them in the
kernel and no plans to add such drivers (Hans de Goede)"
* tag 'acpi-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Add LATT2021 to acpi_ignore_dep_ids[]
ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA
ACPI: PCC: Fix unintentional integer overflow
device property: Fix documentation for *_match_string() APIs
Variable count is just being incremented and it's never used
anywhere else. The variable and the increment are redundant so
remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The return value of acpi_fetch_acpi_dev() could be NULL, which would
cause a NULL pointer dereference to occur in acpi_device_hid().
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
[ rjw: Subject and changelog edits, added empty line after if () ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some documentation first, about how this machinery works:
It seems, the intent of the GHES error records cache is to collect
already reported errors - see the ghes_estatus_cached() checks. There's
even a sentence trying to say what this does:
/*
* GHES error status reporting throttle, to report more kinds of
* errors, instead of just most frequently occurred errors.
*/
New elements are added to the cache this way:
if (!ghes_estatus_cached(estatus)) {
if (ghes_print_estatus(NULL, ghes->generic, estatus))
ghes_estatus_cache_add(ghes->generic, estatus);
The intent being, once this new error record is reported, it gets cached
so that it doesn't get reported for a while due to too many, same-type
error records getting reported in burst-like scenarios. I.e., new,
unreported error types can have a higher chance of getting reported.
Now, the loop in ghes_estatus_cache_add() is trying to pick out the
oldest element in there. Meaning, something which got reported already
but a long while ago, i.e., a LRU-type scheme.
And the cmpxchg() is there presumably to make sure when that selected
element slot_cache is removed, it really *is* that element that gets
removed and not one which replaced it in the meantime.
Now, ghes_estatus_cache_add() selects a slot, and either succeeds in
replacing its contents with a pointer to a newly cached item, or it just
gives up and frees the new item again, without attempting to select
another slot even if one might be available.
Since only inserting new items is being done here, the race can only
cause a failure if the selected slot was updated with another new item
concurrently, which means that it is arbitrary which of those two items
gets dropped.
And "dropped" here means, the item doesn't get added to the cache so
the next time it is seen, it'll get reported again and an insertion
attempt will be done again. Eventually, it'll get inserted and all those
times when the insertion fails, the item will get reported although the
cache is supposed to prevent that and "ratelimit" those repeated error
records. Not a big deal in any case.
This means the cmpxchg() and the special case are not necessary.
Therefore, just drop the existing item unconditionally.
Move the xchg_release() and call_rcu() out of rcu_read_lock/unlock
section since there is no actually dereferencing the pointer at all.
[ bp:
- Flesh out and summarize what was discussed on the thread now
that that cache contraption is understood;
- Touch up code style. ]
Co-developed-by: Jia He <justin.he@arm.com>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221010023559.69655-7-justin.he@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit 0998d06310 ("device-core: Ensure drvdata = NULL when no
driver is bound") the driver core cares for cleaning driver data, so
don't do it in the driver, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit 018d6711c2 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1
for StorageD3Enable") introduced a quirk to allow a system with ambiguous
use of _ADR 0 to force StorageD3Enable.
Julius Brockmann reports that Inspiron 16 5625 suffers that same symptoms.
Add this other system to the list as well.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216440
Reported-and-tested-by: Julius Brockmann <mail@juliusbrockmann.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8ac4e5116f59d6f9ba2fbeb9ce22ab58237a278f
Finish support for the CDAT table, in both the data table compiler and
the disassembler.
Link: https://github.com/acpica/acpica/commit/8ac4e511
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 91bef8bea9cd69c33447ba1bfe2c4273994500fd
Added an underscore instead of an (illegal) *
Link: https://github.com/acpica/acpica/commit/91bef8be
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit fad527b6e76babc7527c41325bfbef6bd1a1132b
FFH(Fixed Function Hardware) Opregion is approved to be added in ACPI 6.5 via
code first approach [1]. It requires special context data similar to GPIO and
Generic Serial Bus as it needs to know platform specific offset and length.
Add support for the special context data needed by FFH Opregion.
FFH op_region enables advanced use of FFH on some architectures. For example,
it could be used to easily proxy AML code to architecture-specific behavior
(to ensure it is OS initiated)
Actual behavior of FFH is ofcourse architecture specific and depends on
the FFH bindings. The offset and length could have arch specific meaning
or usage.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=3598 # [1]
Link: https://github.com/acpica/acpica/commit/fad527b6
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit a36eda9631e84f271319c41288889dd5b1329369
The ACPICA code assumes that EBDA region must be at least 1ki_b in size.
Because this is not guaranteed, it might happen that while scanning the
memory for RSDP pointer, the kernel touches memory above 640ki_b.
This is unwanted as the VGA memory range may not be decoded or
even present when running under virtualization.
Link: https://github.com/acpica/acpica/commit/a36eda96
Signed-off-by: Vit Kabele <vit@kabele.me>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit cc9e7763ceb2e2649fe3422130416d84a3c6854a
If the memory at 0x40e is uninitialized, the retrieved physical_memory
address of EBDA may be beyond the low memory (i.e. above 640K).
If so, the kernel may unintentionally access the VGA memory, that
might not be decoded or even present in case of virtualization.
Link: https://github.com/acpica/acpica/commit/cc9e7763
Signed-off-by: Vit Kabele <vit@kabele.me>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 32d875705c8ee8f99fd8b78dbed48633486a7640
Some chipsets (such as Loongson's LS7A) support fixed pcie wake event
which is defined in the PM1 block(related description can be found in
4.8.4.1.1 PM1 Status Registers, 4.8.4.2.1 PM1 Control Registers and
5.2.9 Fixed ACPI Description Table (FADT)), so we add code to handle it.
Link: https://uefi.org/specifications/ACPI/6.4/
Link: https://github.com/acpica/acpica/commit/32d87570
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_ex_load_op() code has slightly diverged from the upstream
implementation, so correct that to make the behavior consistent with
the upstream and avoid patch backporting issues going forward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge an IRQ override quirk, an ACPI PCC code fix and a device
properties documentation update for 6.1-rc3:
- Make the ACPI device resources code skip IRQ override on Asus
Vivobook S5602ZA (Tamim Khan).
- Fix a possible integer overflow during multiplication in the ACPI
PCC code (Manank Patel).
- Fix the documentation of the *_match_string() family of functions to
properly cover the return value (Andy Shevchenko).
* acpi-resource:
ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA
* acpi-pcc:
ACPI: PCC: Fix unintentional integer overflow
* devprop:
device property: Fix documentation for *_match_string() APIs
Some x86/ACPI laptops with MIPI cameras have a LATT2021 ACPI device
in the _DEP dependency list of the ACPI devices for the camera-sensors
(which have flags.honor_deps set).
The _DDN for the LATT2021 device is "Lattice FW Update Client Driver",
suggesting that this is used for firmware updates of something. There
is no Linux driver for this and if Linux gets support for updates it
will likely be in userspace through fwupd.
For now add the LATT2021 HID to acpi_ignore_dep_ids[] so that
acpi_dev_ready_for_enumeration() will return true once the other _DEP
dependencies are met.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Like the Asus Vivobook K3402ZA/K3502ZA/S5402ZA Asus Vivobook S5602ZA
has an ACPI DSDT table the describes IRQ 1 as ActiveLow while the kernel
overrides it to Edge_High. This prevents the keyboard on this laptop
from working. To fix this add this laptop to the skip_override_table so
that the kernel does not override IRQ 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216579
Tested-by: Dzmitry <wrkedm@gmail.com>
Signed-off-by: Tamim Khan <tamim@fusetak.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A small set of assorted fixes and hardware-id additions for 6.1.
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Fix missing native backlight on Chromebooks
asus-wmi:
- Add support for ROG X16 tablet mode
leds:
- simatic-ipc-leds-gpio: fix incorrect LED to GPIO mapping
platform/x86/amd:
- pmc: Read SMU version during suspend on Cezanne systems
platform/x86/intel:
- pmc/core: Add Raptor Lake support to pmc core driver
thinkpad_acpi:
- Fix reporting a non present second fan on some models
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmNXsBcUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yvuwf6AgDXF0iVKlJWUx0OXwK54SQuGF7h
Ae+9B1la3BTKJd6p9lXon5UKOhnnsUMv+Y+ZBsWZ6Al4VYASf6ZnsXKAiV7WLrUk
rlqmZPodgdLSFmnff/knZ/8VbUFhgCkR82GVm47fRxynqPMkHjA6e8crLO4hmKZp
6OhA475bB+ZK8IfGp9OuwzA+I+V0NTF8k52vCZfycF2Csga8AZmiLqbVHUIvXxjt
lpQJb+9b00WZ/uVbGeZpDHM5RJULnvJLKVHDApXlbTVFQ0fSxIh8nsk12qFIF80d
CxRtDEv629AaybWVtRl9GRK5TkZ1W8W5WcDP8Azf0GMj5H+ckxXK9gIeBQ==
=v6EI
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"The only thing which stands out is a fix for a backlight regression on
Chromebooks (under drivers/acpi, with ack from Rafael).
Other then that nothing special to report just various small fixes and
hardware-id additions"
* tag 'platform-drivers-x86-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
ACPI: video: Fix missing native backlight on Chromebooks
platform/x86/intel: pmc/core: Add Raptor Lake support to pmc core driver
leds: simatic-ipc-leds-gpio: fix incorrect LED to GPIO mapping
platform/x86/amd: pmc: Read SMU version during suspend on Cezanne systems
platform/x86: thinkpad_acpi: Fix reporting a non present second fan on some models
platform/x86: asus-wmi: Add support for ROG X16 tablet mode
Some documentation first, about how this machinery works:
It seems, the intent of the GHES error records cache is to collect
already reported errors - see the ghes_estatus_cached() checks. There's
even a sentence trying to say what this does:
/*
* GHES error status reporting throttle, to report more kinds of
* errors, instead of just most frequently occurred errors.
*/
New elements are added to the cache this way:
if (!ghes_estatus_cached(estatus)) {
if (ghes_print_estatus(NULL, ghes->generic, estatus))
ghes_estatus_cache_add(ghes->generic, estatus);
The intent being, once this new error record is reported, it gets cached
so that it doesn't get reported for a while due to too many, same-type
error records getting reported in burst-like scenarios. I.e., new,
unreported error types can have a higher chance of getting reported.
Now, the loop in ghes_estatus_cache_add() is trying to pick out the
oldest element in there. Meaning, something which got reported already
but a long while ago, i.e., a LRU-type scheme.
And the cmpxchg() is there presumably to make sure when that selected
element slot_cache is removed, it really *is* that element that gets
removed and not one which replaced it in the meantime.
Now, ghes_estatus_cache_add() selects a slot, and either succeeds in
replacing its contents with a pointer to a newly cached item, or it just
gives up and frees the new item again, without attempting to select
another slot even if one might be available.
Since only inserting new items is being done here, the race can only
cause a failure if the selected slot was updated with another new item
concurrently, which means that it is arbitrary which of those two items
gets dropped.
And "dropped" here means, the item doesn't get added to the cache so
the next time it is seen, it'll get reported again and an insertion
attempt will be done again. Eventually, it'll get inserted and all those
times when the insertion fails, the item will get reported although the
cache is supposed to prevent that and "ratelimit" those repeated error
records. Not a big deal in any case.
This means the cmpxchg() and the special case are not necessary.
Therefore, just drop the existing item unconditionally.
Move the xchg_release() and call_rcu() out of rcu_read_lock/unlock
section since there is no actually dereferencing the pointer at all.
[ bp:
- Flesh out and summarize what was discussed on the thread now
that that cache contraption is understood;
- Touch up code style. ]
Co-developed-by: Jia He <justin.he@arm.com>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221010023559.69655-7-justin.he@arm.com
Chromebooks don't have backlight in ACPI table, they suppose to use
native backlight in this case. Check presence of the CrOS embedded
controller ACPI device and prefer the native backlight if EC found.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Fixes: 2600bfa3df ("ACPI: video: Add acpi_video_backlight_use_native() helper")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20221024141210.67784-1-dmitry.osipenko@collabora.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
- Add missing device reference counting to acpi_get_pci_dev() after
changing it recently (Rafael Wysocki).
- Fix resource list walk in acpi_dma_get_range() (Robin Murphy).
- Add IRQ override quirk for LENOVO IdeaPad and extend the IRQ
override warning message (Jiri Slaby).
- Fix integer overflow in ghes_estatus_pool_init() (Ashish Kalra).
- Fix multiple error records handling in one of the ACPI extlog driver
code paths (Tony Luck).
- Prune DSDT override documentation from index after dropping it (Bagas
Sanjaya).
-----BEGIN PGP SIGNATURE-----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=w4gn
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix issues introduced during this merge window (ACPI/PCI, device
enumeration and documentation) and some other ones found recently.
Specifics:
- Add missing device reference counting to acpi_get_pci_dev() after
changing it recently (Rafael Wysocki)
- Fix resource list walk in acpi_dma_get_range() (Robin Murphy)
- Add IRQ override quirk for LENOVO IdeaPad and extend the IRQ
override warning message (Jiri Slaby)
- Fix integer overflow in ghes_estatus_pool_init() (Ashish Kalra)
- Fix multiple error records handling in one of the ACPI extlog
driver code paths (Tony Luck)
- Prune DSDT override documentation from index after dropping it
(Bagas Sanjaya)"
* tag 'acpi-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Fix DMA range assignment
ACPI: PCI: Fix device reference counting in acpi_get_pci_dev()
ACPI: resource: note more about IRQ override
ACPI: resource: do IRQ override on LENOVO IdeaPad
ACPI: extlog: Handle multiple records
ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init()
Documentation: ACPI: Prune DSDT override documentation from index
The ACPI CEDT.CFMWS indicates a range of possible address where new CXL
regions can appear. Each range is associated with a QTG id (QoS
Throttling Group id). For each range + QTG pair that is not covered by a proximity
domain in the SRAT, Linux creates a new NUMA node. However, the commit
that added the new ranges missed updating the node_possible mask which
causes memory_group_register() to fail. Add the new nodes to the
nodes_possible mask.
Cc: <stable@vger.kernel.org>
Fixes: fd49f99c18 ("ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT")
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166631003537.1167078.9373680312035292395.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Commit
dc4e8c07e9 ("ACPI: APEI: explicit init of HEST and GHES in apci_init()")
introduced a bug leading to ghes_edac_register() to be invoked before
edac_init(). Because at that time the bus "edac" hadn't been even
registered, this created sysfs nodes as /devices/mc0 instead of
/sys/devices/system/edac/mc/mc0 on an Ampere eMag server.
Fix this by turning ghes_edac into a proper module.
The list of GHES devices returned is not protected from being modified
concurrently but it is pretty static as it gets created only during GHES
init and latter is not a module so...
[ bp: Massage. ]
Fixes: dc4e8c07e9 ("ACPI: APEI: explicit init of HEST and GHES in apci_init()")
Co-developed-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221010023559.69655-5-justin.he@arm.com
Merge assorted ACPI fixes for 6.1-rc2:
- Fix resource list walk in acpi_dma_get_range() (Robin Murphy).
- Add IRQ override quirk for LENOVO IdeaPad and extend the IRQ
override warning message (Jiri Slaby).
- Fix integer overflow in ghes_estatus_pool_init() (Ashish Kalra).
- Fix multiple error records handling in one of the ACPI extlog driver
code paths (Tony Luck).
- Prune DSDT override documentation from index after dropping it (Bagas
Sanjaya).
* acpi-scan:
ACPI: scan: Fix DMA range assignment
* acpi-resource:
ACPI: resource: note more about IRQ override
ACPI: resource: do IRQ override on LENOVO IdeaPad
* acpi-apei:
ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init()
* acpi-extlog:
ACPI: extlog: Handle multiple records
* acpi-docs:
Documentation: ACPI: Prune DSDT override documentation from index
To make ghes_edac a proper module, prepare to decouple its dependencies
from GHES.
Move the ghes_edac.force_load parameter to ghes.c in order to
properly control whether ghes_edac should be force-loaded: In
ghes_edac_register() it is too late to set the module flag.
Introduce a helper ghes_get_devices(), which returns the list of GHES
devices which got probed when the platform-check passes on the system.
The previous force_load check is not needed in ghes_edac_unregister()
since it will be checked in the module's init function of ghes_edac
later.
[ bp: Massage. ]
Suggested-by: Toshi Kani <toshi.kani@hpe.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221010023559.69655-4-justin.he@arm.com
Add gfp parameter to iommu_alloc_resv_region() for the callers to specify
the memory allocation behavior. Thus iommu_alloc_resv_region() could also
be available in critical contexts.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220927053109.4053662-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In order to make it a proper module and disentangle it from facilities,
add a notifier for reporting memory errors. Use an atomic notifier
because calls sites like ghes_proc_in_irq() run in interrupt context.
[ bp: Massage commit message. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221010023559.69655-3-justin.he@arm.com
Assigning the device's dma_range_map from the iterator variable after
the loop means it always points to the empty terminator at the end of
the map, which is not what we want. Similarly, freeing the iterator on
error when it points to somwhere in the middle of the allocated array
won't work either. Fix this.
Fixes: bf2ee8d0c3 ("ACPI: scan: Support multiple DMA windows with different offsets")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jianmin Lv <lvjianmin@loongson.cn>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 63f534b8ba ("ACPI: PCI: Rework acpi_get_pci_dev()") failed
to reference count the device returned by acpi_get_pci_dev() as
expected by its callers which in some cases may cause device objects
to be dropped prematurely.
Add the missing get_device() to acpi_get_pci_dev().
Fixes: 63f534b8ba ("ACPI: PCI: Rework acpi_get_pci_dev()")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use an exclamation mark to note which of the properties was overridden.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
LENOVO IdeaPad Flex 5 is ryzen-5 based and the commit below removed IRQ
overriding for those. This broke touchscreen and trackpad:
i2c_designware AMDI0010:00: controller timed out
i2c_designware AMDI0010:03: controller timed out
i2c_hid_acpi i2c-MSFT0001:00: failed to reset device: -61
i2c_designware AMDI0010:03: controller timed out
...
i2c_hid_acpi i2c-MSFT0001:00: can't add hid device: -61
i2c_hid_acpi: probe of i2c-MSFT0001:00 failed with error -61
White-list this specific model in the override_table.
For this to work, the ZEN test needs to be put below the table walk.
Fixes: 37c81d9f1d (ACPI: resource: skip IRQ override on AMD Zen platforms)
Link: https://bugzilla.suse.com/show_bug.cgi?id=1203794
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If there is no user space consumer of extlog_mem trace records, then
Linux properly handles multiple error records in an ELOG block
extlog_print()
print_extlog_rcd()
__print_extlog_rcd()
cper_estatus_print()
apei_estatus_for_each_section()
But the other code path hard codes looking for a single record to
output a trace record.
Fix by using the same apei_estatus_for_each_section() iterator
to step over all records.
Fixes: 2dfb7d51a6 ("trace, RAS: Add eMCA trace event interface")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix ACPI device object reference counting in (recently updated)
skl_int3472_fill_clk_pdata() (Andy Shevchenko).
- Fix a memory leak in APEI by avoiding to add a task_work to kernel
threads running when an asynchronous error is detected (Shuai Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more consistent
and drop redundant code from it (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=pwnm
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix two issues, in APEI and in the int3472 driver, clean up the
ACPI thermal driver, add ACPI support for non-GPE system wakeup events
and make the system reboot code use the S5 (system off) state by
default.
Specifics:
- Fix ACPI device object reference counting in (recently updated)
skl_int3472_fill_clk_pdata() (Andy Shevchenko).
- Fix a memory leak in APEI by avoiding to add a task_work to kernel
threads running when an asynchronous error is detected (Shuai Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more
consistent and drop redundant code from it (Rafael Wysocki)"
* tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: thermal: Drop some redundant code
ACPI: thermal: Drop redundant parens from expressions
ACPI: thermal: Use white space more consistently
platform/x86: int3472: Don't leak reference on error
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
PM: ACPI: reboot: Reinstate S5 for reboot
kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
i2c: acpi: Use ACPI wake capability bit to set wake_irq
ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
Including:
- Removal of the bus_set_iommu() interface which became
unnecesary because of IOMMU per-device probing
- Make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- Support for AMD IOMMUv2 page-tables for the DMA-API layer. The
v2 page-tables are compatible with the x86 CPU page-tables.
Using them for DMA-API prepares support for hardware-assisted
IOMMU virtualization
- Support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- Some smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=h0sT
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- remove the bus_set_iommu() interface which became unnecesary because
of IOMMU per-device probing
- make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- support for AMD IOMMUv2 page-tables for the DMA-API layer.
The v2 page-tables are compatible with the x86 CPU page-tables. Using
them for DMA-API prepares support for hardware-assisted IOMMU
virtualization
- support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- some smaller fixes and cleanups
* tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits)
iommu/vt-d: Avoid unnecessary global DMA cache invalidation
iommu/vt-d: Avoid unnecessary global IRTE cache invalidation
iommu/vt-d: Rename cap_5lp_support to cap_fl5lp_support
iommu/vt-d: Remove pasid_set_eafe()
iommu/vt-d: Decouple PASID & PRI enabling from SVA
iommu/vt-d: Remove unnecessary SVA data accesses in page fault path
dt-bindings: iommu: arm,smmu-v3: Relax order of interrupt names
iommu: dart: Support t6000 variant
iommu/io-pgtable-dart: Add DART PTE support for t6000
iommu/io-pgtable: Add DART subpage protection support
iommu/io-pgtable: Move Apple DART support to its own file
iommu/mediatek: Add support for MT6795 Helio X10 M4Us
iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173
dt-bindings: mediatek: Add bindings for MT6795 M4U
iommu/iova: Fix module config properly
iommu/amd: Fix sparse warning
iommu/amd: Remove outdated comment
iommu/amd: Free domain ID after domain_flush_pages
iommu/amd: Free domain id in error path
iommu/virtio: Fix compile error with viommu_capable()
...
Merge additional APEI changes, ACPI updates related to device wakeup and
system restart and ACPI thermal driver cleanups for 6.1-rc1:
- Fix a memory leak in APEI by avoiding to add do not add task_work to
kernel threads running when an asynchronous error is detected (Shuai
Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more consistent
and drop redundant code from it (Rafael Wysocki).
* acpi-apei:
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
* acpi-wakeup:
ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
i2c: acpi: Use ACPI wake capability bit to set wake_irq
ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
* acpi-reboot:
PM: ACPI: reboot: Reinstate S5 for reboot
kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
* acpi-thermal:
ACPI: thermal: Drop some redundant code
ACPI: thermal: Drop redundant parens from expressions
ACPI: thermal: Use white space more consistently
- Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
- Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
- Freezer:
- Rewrite the core freezer to behave better wrt thawing and be simpler
in general, by replacing PF_FROZEN with TASK_FROZEN & fixing/adjusting
all the fallout.
- Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() & replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
- Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KjMD
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
Freezer:
- Rewrite the core freezer to behave better wrt thawing and be
simpler in general, by replacing PF_FROZEN with TASK_FROZEN &
fixing/adjusting all the fallout.
Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() &
replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications"
* tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
sched: Fix more TASK_state comparisons
sched: Fix TASK_state comparisons
sched/fair: Move call to list_last_entry() in detach_tasks
sched/fair: Cleanup loop_max and loop_break
sched/fair: Make sure to try to detach at least one movable task
sched: Show PF_flag holes
freezer,sched: Rewrite core freezer logic
sched: Widen TAKS_state literals
sched/wait: Add wait_event_state()
sched/completion: Add wait_for_completion_state()
sched: Add TASK_ANY for wait_task_inactive()
sched: Change wait_task_inactive()s match_state
freezer,umh: Clean up freezer/initrd interaction
freezer: Have {,un}lock_system_sleep() save/restore flags
sched: Rename task_running() to task_on_cpu()
sched/fair: Cleanup for SIS_PROP
sched/fair: Default to false in test_idle_cores()
sched/fair: Remove useless check in select_idle_core()
sched/fair: Avoid double search on same cpu
sched/fair: Remove redundant check in select_idle_smt()
...
Highlights:
- AMD Platform Management Framework (PMF) driver with AMT and QnQF support
- AMD PMC: Improved logging for debugging s2idle issues
- Big refactor of the ACPI/x86 backlight handling, ensuring that we only
register 1 /sys/class/backlight device per LCD panel
- Microsoft Surface:
- Surface Laptop Go 2 support
- Surface Pro 8 HID sensor support
- Asus WMI:
- Lots of cleanups
- Support for TUF RGB keyboard backlight control
- Add support for ROG X13 tablet mode
- Siemens Simatic: IPC227G and IPC427G support
- Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
- tools/power/x86/intel-speed-select: Various improvements
- Various cleanups
- Various small bugfixes
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Change disable_backlight_sysfs_if quirks to acpi_backlight=native
- s2idle: Add a new ->check() callback for platform_s2idle_ops
- video: Fix indentation of video_detect_dmi_table[] entries
- video: Drop NL5x?U, PF4NU1F and PF5?U?? acpi_backlight=native quirks
- video: Drop "Samsung X360" acpi_backlight=native quirk
- video: Remove acpi_video_set_dmi_backlight_type()
- video: Add Apple GMUX brightness control detection
- video: Add Nvidia WMI EC brightness control detection (v3)
- video: Refactor acpi_video_get_backlight_type() a bit
- video: Remove code to unregister acpi_video backlight when a native backlight registers
- video: Make backlight class device registration a separate step (v2)
- video: Simplify acpi_video_unregister_backlight()
- video: Remove acpi_video_bus from list before tearing it down
- video: Drop backlight_device_get_by_type() call from acpi_video_get_backlight_type()
- video: Add acpi_video_backlight_use_native() helper
acer-wmi:
- Move backlight DMI quirks to acpi/video_detect.c
- Acer Aspire One AOD270/Packard Bell Dot keymap fixes
apple-gmux:
- Stop calling acpi/video.h functions
asus-wmi:
- Expand support of GPU fan to read RPM and label
- Make kbd_rgb_mode_groups static
- Move acpi_backlight=native quirks to ACPI video_detect.c
- Move acpi_backlight=vendor quirks to ACPI video_detect.c
- Drop DMI chassis-type check from backlight handling
- Increase FAN_CURVE_BUF_LEN to 32
- Fix the name of the mic-mute LED classdev
- Implement TUF laptop keyboard power states
- Implement TUF laptop keyboard LED modes
- Support the GPU fan on TUF laptops
- Modify behaviour of Fn+F5 fan key
- Update tablet_mode_sw module-param help text
- Simplify tablet-mode-switch handling
- Simplify tablet-mode-switch probing
- Add support for ROG X13 tablet mode
- Adjust tablet/lidflip handling to use enum
- Support the hardware GPU MUX on some laptops
- Simplify some of the *_check_present() helpers
- Refactor panel_od attribute
- Refactor egpu_enable attribute
- Refactor disable_gpu attribute
- Document the panel_od sysfs attribute
- Document the egpu_enable sysfs attribute
- Document the dgpu_disable sysfs attribute
- Use kobj_to_dev()
- Convert all attr-show to use sysfs_emit
compal-laptop:
- Get rid of a few forward declarations
dell-privacy:
- convert to use dev_groups
dell-smbios-base:
- Use sysfs_emit()
dell-wmi:
- Add WMI event 0x0012 0x0003 to the list
docs:
- ABI: charge_control_end_threshold may not support all values
drivers/platform:
- toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models
drm/amdgpu:
- Register ACPI video backlight when skipping amdgpu backlight registration
- Don't register backlight when another backlight should be used (v3)
drm/i915:
- Call acpi_video_register_backlight() (v3)
- Don't register backlight when another backlight should be used (v2)
drm/nouveau:
- Register ACPI video backlight when nv_backlight registration fails (v2)
- Don't register backlight when another backlight should be used (v2)
drm/radeon:
- Register ACPI video backlight when skipping radeon backlight registration
- Don't register backlight when another backlight should be used (v3)
drm/todo:
- Add entry about dealing with brightness control on devices with > 1 panel
gpio-f7188x:
- use unique labels for banks/chips
- Add GPIO support for Nuvoton NCT6116
- add a prefix to macros to keep gpio namespace clean
- switch over to using pr_fmt
hp-wmi:
- Support touchpad on/off
- Setting thermal profile fails with 0x06
int3472/discrete:
- Drop a forward declaration
intel-uncore-freq:
- Use sysfs_emit() to instead of scnprintf()
intel_cht_int33fe:
- Fix comment according to the code flow
leds:
- simatic-ipc-leds-gpio: Make simatic_ipc_led_gpio_table static
- simatic-ipc-leds-gpio: add new model 227G
move from strlcpy with unused retval to strscpy:
- move from strlcpy with unused retval to strscpy
msi-laptop:
- Change DMI match / alias strings to fix module autoloading
- Add msi_scm_disable_hw_fn_handling() helper
- Add msi_scm_model_exit() helper
- Fix resource cleanup
- Simplify ec_delay handling
- Fix old-ec check for backlight registering
- Drop MSI_DRIVER_VERSION
- Use MODULE_DEVICE_TABLE()
nvidia-wmi-ec-backlight:
- Use acpi_video_get_backlight_type()
- Move fw interface definitions to a header (v2)
p2sb:
- Fix UAF when caller uses resource name
platform/mellanox:
- mlxreg-lc: Make error handling flow consistent
- Remove redundant 'NULL' check
- Remove unnecessary code
- mlxreg-lc: Fix locking issue
- mlxreg-lc: Fix coverity warning
platform/surface:
- Split memcpy() of struct ssam_event flexible array
- aggregator_registry: Add HID devices for sensors and UCSI client to SP8
- aggregator_registry: Rename HID device nodes based on new findings
- aggregator_registry: Rename HID device nodes based on their function
- aggregator_registry: Add support for Surface Laptop Go 2
platform/x86:
- use PLATFORM_DEVID_NONE instead of -1
platform/x86/amd:
- pmc: Dump idle mask during "check" stage instead
- pmc: remove CONFIG_DEBUG_FS checks
- pmc: Fix build without debugfs
- pmc: Add sysfs files for SMU
- pmc: Add an extra STB message for checking s2idle entry
- pmc: Always write to the STB
- pmc: Add defines for STB events
platform/x86/amd/pmf:
- Remove unused power_delta instances
- install notify handler after acpi init
- Add sysfs to toggle CnQF
- Add support for CnQF
- Fix clang unused variable warning
- Fix undefined reference to platform_profile
- Force load driver on older supported platforms
- Handle AMT and CQL events for Auto mode
- Add support for Auto mode feature
- Get performance metrics from PMFW
- Add fan control support
- Add heartbeat signal support
- Add debugfs information
- Add support SPS PMF feature
- Add support for PMF APCI layer
- Add support for PMF core layer
- Add ABI doc for AMD PMF
- Add AMD PMF driver entry
platform/x86/intel/wmi:
- thunderbolt: Use dev_groups callback
pmc_atom:
- Amend comment style and grammar
- Make terminator entry uniform
- Improve quirk message to be less cryptic
- Fix SLP_TYPx bitfield mask
samsung-laptop:
- Move acpi_backlight=[vendor|native] quirks to ACPI video_detect.c
simatic-ipc:
- add new model 427G
- enable watchdog for 227G
thinkpad_acpi:
- Explicitly set to balanced mode on startup
tools/power/x86/intel-speed-select:
- Release v1.13
- Optimize CPU initialization
- Utilize cpu_map to get physical id
- Remove unused struct clos_config fields
- Enforce isst_id value
- Do not export get_physical_id
- Introduce is_cpu_in_power_domain helper
- Cleanup get_physical_id usage
- Convert more function to use isst_id
- Add pkg and die in isst_id
- Introduce struct isst_id
- Remove unused core_mask array
- Remove dead code
- Fix cpu count for TDP level display
toshiba_acpi:
- change turn_on_panel_on_resume to static
- Remove duplicate include
- Set correct parent for input device.
- Add fan RPM reading (hwmon interface)
- Add fan RPM reading (internals)
- Stop using acpi_video_set_dmi_backlight_type()
- Fix ECO LED control on Toshiba Z830
- Battery charge mode in toshiba_acpi (internals)
- Battery charge mode in toshiba_acpi (sysfs)
wmi:
- Drop forward declaration of static functions
- Allow duplicate GUIDs for drivers that use struct wmi_driver
x86-android-tablets:
- Fix broken touchscreen on Chuwi Hi8 with Windows BIOS
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmM9eLgUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zIzAf+JG058wucK0Zsnu4POzGp+uHjnWuu
AJUmTeRvCD7MidwIv5PiwEtTucQ8OuXYR+tPc8LIwCVZtc05FBmh7Y8le/CX0SS6
n9EZIvCk3Owosti5w2TPnCK920kh+Wfxl/fmfDbpi6+lpAL8r+F/mZEGKGFdZpWu
Q+yM/eyxwPH8q8gjrXOUC7rN43aYeO3OCpNG3GYkQ/2S5qrjuz39dXhNVzdSsxm7
aYOqJRNjZQEjQ3kJcp65kC6oWp3UaI1zdpGwhBG/SY8BCtCYZzlRy7gN2FCJfAa/
EyYayOvdy0zNwewbIYzck4W80hUDtfidgZgZ9crQscO/JjbGi6LhveD4YA==
=afGw
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD Platform Management Framework (PMF) driver with AMT and QnQF
support
- AMD PMC: Improved logging for debugging s2idle issues
- Big refactor of the ACPI/x86 backlight handling, ensuring that we
only register 1 /sys/class/backlight device per LCD panel
- Microsoft Surface:
- Surface Laptop Go 2 support
- Surface Pro 8 HID sensor support
- Asus WMI:
- Lots of cleanups
- Support for TUF RGB keyboard backlight control
- Add support for ROG X13 tablet mode
- Siemens Simatic: IPC227G and IPC427G support
- Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
- tools/power/x86/intel-speed-select: Various improvements
- Various cleanups
- Various small bugfixes
* tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (153 commits)
platform/x86: use PLATFORM_DEVID_NONE instead of -1
platform/x86/amd: pmc: Dump idle mask during "check" stage instead
platform/x86/intel/wmi: thunderbolt: Use dev_groups callback
platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks
platform/surface: Split memcpy() of struct ssam_event flexible array
platform/x86: compal-laptop: Get rid of a few forward declarations
platform/x86: intel-uncore-freq: Use sysfs_emit() to instead of scnprintf()
platform/x86: dell-smbios-base: Use sysfs_emit()
platform/x86/amd/pmf: Remove unused power_delta instances
platform/x86/amd/pmf: install notify handler after acpi init
Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF
platform/x86/amd/pmf: Add sysfs to toggle CnQF
platform/x86/amd/pmf: Add support for CnQF
platform/x86/amd: pmc: Fix build without debugfs
platform/x86: hp-wmi: Support touchpad on/off
platform/x86: int3472/discrete: Drop a forward declaration
platform/x86: toshiba_acpi: change turn_on_panel_on_resume to static
platform/x86: wmi: Drop forward declaration of static functions
platform/x86: toshiba_acpi: Remove duplicate include
platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
...
Drop some redundant initialization of local variables, a redundant
return statement and a redundant "else" from the ACPI thermal driver.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Some expressions in the ACPI thermal driver contain redundant
parentheses. Drop them.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The usage of white space in the ACPI thermal driver is not very
consistent, so improve that a bit.
While at it, add missing braces to if()/else in a few places.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
If an error is detected as a result of user-space process accessing a
corrupt memory location, the CPU may take an abort. Then the platform
firmware reports kernel via NMI like notifications, e.g. NOTIFY_SEA,
NOTIFY_SOFTWARE_DELEGATED, etc.
For NMI like notifications, commit 7f17b4a121 ("ACPI: APEI: Kick the
memory_failure() queue for synchronous errors") keep track of whether
memory_failure() work was queued, and make task_work pending to flush out
the queue so that the work is processed before return to user-space.
The code use init_mm to check whether the error occurs in user space:
if (current->mm != &init_mm)
The condition is always true, becase _nobody_ ever has "init_mm" as a real
VM any more.
In addition to abort, errors can also be signaled as asynchronous
exceptions, such as interrupt and SError. In such case, the interrupted
current process could be any kind of thread. When a kernel thread is
interrupted, the work ghes_kick_task_work deferred to task_work will never
be processed because entry_handler returns to call ret_to_kernel() instead
of ret_to_user(). Consequently, the estatus_node alloced from
ghes_estatus_pool in ghes_in_nmi_queue_one_entry() will not be freed.
After around 200 allocations in our platform, the ghes_estatus_pool will
run of memory and ghes_in_nmi_queue_one_entry() returns ENOMEM. As a
result, the event failed to be processed.
sdei: event 805 on CPU 113 failed with error: -2
Finally, a lot of unhandled events may cause platform firmware to exceed
some threshold and reboot.
The condition should generally just do
if (current->mm)
as described in active_mm.rst documentation.
Then if an asynchronous error is detected when a kernel thread is running,
(e.g. when detected by a background scrubber), do not add task_work to it
as the original patch intends to do.
Fixes: 7f17b4a121 ("ACPI: APEI: Kick the memory_failure() queue for synchronous errors")
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit d60cd06331 ("PM: ACPI: reboot: Use S5 for reboot") caused Dell
PowerEdge r440 hangs at reboot.
The issue is fixed by commit 2ca1c94ce0 ("tg3: Disable tg3 device on
system reboot to avoid triggering AER"), so use the new sysoff API to
reinstate S5 for reboot on ACPI-based systems.
Using S5 for reboot is default behavior under Windows: "A full shutdown
(S5) occurs when a system restart is requested" [1].
Link: https://docs.microsoft.com/en-us/windows/win32/power/system-power-state # [1]
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change adds support for ACPI devices that use ExclusiveAndWake or
SharedAndWake in their _CRS GpioInt definition (instead of using _PRW),
and also provide power resources. Previously the ACPI subsystem had no
idea if the device had a wake capable interrupt armed. This resulted
in the ACPI device PM system placing the device into D3Cold, and thus
cutting power to the device. With this change we will now query the
_S0W method to figure out the appropriate wake capable D-state.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI IRQ/Interrupt resources contain a bit that describes if the
interrupt should wake the system. This change exposes that bit via
a new IORESOURCE_IRQ_WAKECAPABLE flag. Drivers should check this flag
before arming an IRQ to wake the system.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Reimplement acpi_get_pci_dev() using the list of physical devices
associated with the given ACPI device object (Rafael Wysocki).
- Rename ACPI device object reference counting functions (Rafael
Wysocki).
- Rearrange ACPI device object initialization code (Rafael Wysocki).
- Drop parent field from struct acpi_device (Rafael Wysocki).
- Extend the the int3472-tps68470 driver to support multiple consumers
of a single TPS68470 along with the requisite framework-level
support (Daniel Scally).
- Filter out non-memory resources in is_memory(), add a helper
function to find all memory type resources of an ACPI device object
and use that function in 3 places (Heikki Krogerus).
- Add IRQ override quirks for Asus Vivobook K3402ZA/K3502ZA and ASUS
model S5402ZA (Tamim Khan, Kellen Renshaw).
- Fix acpi_dev_state_d0() kerneldoc (Sakari Ailus).
- Fix up suspend-to-idle support on ASUS Rembrandt laptops (Mario
Limonciello).
- Clean up ACPI platform devices support code (Andy Shevchenko, John
Garry).
- Clean up ACPI bus management code (Andy Shevchenko, ye xingchen).
- Add support for multiple DMA windows with different offsets to the
ACPI device enumeration code and use it on LoongArch (Jianmin Lv).
- Clean up the ACPI LPSS (Intel SoC) driver (Andy Shevchenko).
- Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable (Mario
Limonciello).
- Drop unused dev_fmt() and redundant 'HMAT' prefix from the HMAT
parsing code (Liu Shixin).
- Make ACPI FPDT parsing code avoid calling acpi_os_map_memory() on
invalid physical addresses (Hans de Goede).
- Silence missing-declarations warning related to Apple device
properties management (Lukas Wunner).
- Disable frequency invariance in the CPPC library if registers used
by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton).
- Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan).
- Fix Tx acknowledge in the PCC address space handler (Huisong Li).
- Use wait_for_completion_timeout() for PCC mailbox operations (Huisong
Li).
- Release resources on PCC address space setup failure path (Rafael
Mendonca).
- Remove unneeded result variables from APEI code (ye xingchen).
- Print total number of records found during BERT log parsing (Dmitry
Monakhov).
- Drop support for 3 _OSI strings that should not be necessary any
more and update documentation on custom _OSI strings so that adding
new ones is not encouraged any more (Mario Limonciello).
- Drop unneeded result variable from ec_write() (ye xingchen).
- Remove the leftover struct acpi_ac_bl from the ACPI AC driver (Hanjun
Guo).
- Reorder symbols to get rid of a few forward declarations in the ACPI
fan driver (Uwe Kleine-König).
- Add Toshiba Satellite/Portege Z830 ACPI backlight quirk (Arvid
Norlander).
- Add ARM DMA-330 controller to the supported list in the ACPI AMBA
driver (Vijayenthiran Subramaniam).
- Drop references to non-functional 01.org/linux-acpi web site from
MAINTAINERS and Kconfig help texts (Rafael Wysocki).
- Replace strlcpy() with unused retval with strscpy() in the ACPI
support code (Wolfram Sang).
- Do not initialize ret in main() in the pfrut utility (Shi junming).
- Drop useless ACPI DSDT override documentation (Rafael Wysocki).
- Fix a few typos and wording mistakes in the ACPI device enumeration
documentation (Jean Delvare).
- Introduce acpi_dev_uid_to_integer() to convert a _UID string into an
integer value (Andy Shevchenko).
- Use acpi_dev_uid_to_integer() in several places to unify _UID
handling (Andy Shevchenko).
- Drop unused pnpid32_to_pnpid() declaration from PNP code (Gaosheng
Cui).
-----BEGIN PGP SIGNATURE-----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=xyUK
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"ACPI and PNP updates for 6.1-rc1.
These rearrange the ACPI device object initialization code (to get rid
of a redundant parent pointer from struct acpi_device among other
things), unify the _UID handling, drop support for some _OSI strings
that should not be necessary any more, add new IDs to support more
hardware and some more quirks, fix a few issues and clean up code all
over.
Specifics:
- Reimplement acpi_get_pci_dev() using the list of physical devices
associated with the given ACPI device object (Rafael Wysocki)
- Rename ACPI device object reference counting functions (Rafael
Wysocki)
- Rearrange ACPI device object initialization code (Rafael Wysocki)
- Drop parent field from struct acpi_device (Rafael Wysocki)
- Extend the the int3472-tps68470 driver to support multiple
consumers of a single TPS68470 along with the requisite
framework-level support (Daniel Scally)
- Filter out non-memory resources in is_memory(), add a helper
function to find all memory type resources of an ACPI device object
and use that function in 3 places (Heikki Krogerus)
- Add IRQ override quirks for Asus Vivobook K3402ZA/K3502ZA and ASUS
model S5402ZA (Tamim Khan, Kellen Renshaw)
- Fix acpi_dev_state_d0() kerneldoc (Sakari Ailus)
- Fix up suspend-to-idle support on ASUS Rembrandt laptops (Mario
Limonciello)
- Clean up ACPI platform devices support code (Andy Shevchenko, John
Garry)
- Clean up ACPI bus management code (Andy Shevchenko, ye xingchen)
- Add support for multiple DMA windows with different offsets to the
ACPI device enumeration code and use it on LoongArch (Jianmin Lv)
- Clean up the ACPI LPSS (Intel SoC) driver (Andy Shevchenko)
- Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable (Mario
Limonciello)
- Drop unused dev_fmt() and redundant 'HMAT' prefix from the HMAT
parsing code (Liu Shixin)
- Make ACPI FPDT parsing code avoid calling acpi_os_map_memory() on
invalid physical addresses (Hans de Goede)
- Silence missing-declarations warning related to Apple device
properties management (Lukas Wunner)
- Disable frequency invariance in the CPPC library if registers used
by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton)
- Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan)
- Fix Tx acknowledge in the PCC address space handler (Huisong Li)
- Use wait_for_completion_timeout() for PCC mailbox operations
(Huisong Li)
- Release resources on PCC address space setup failure path (Rafael
Mendonca)
- Remove unneeded result variables from APEI code (ye xingchen)
- Print total number of records found during BERT log parsing (Dmitry
Monakhov)
- Drop support for 3 _OSI strings that should not be necessary any
more and update documentation on custom _OSI strings so that adding
new ones is not encouraged any more (Mario Limonciello)
- Drop unneeded result variable from ec_write() (ye xingchen)
- Remove the leftover struct acpi_ac_bl from the ACPI AC driver
(Hanjun Guo)
- Reorder symbols to get rid of a few forward declarations in the
ACPI fan driver (Uwe Kleine-König)
- Add Toshiba Satellite/Portege Z830 ACPI backlight quirk (Arvid
Norlander)
- Add ARM DMA-330 controller to the supported list in the ACPI AMBA
driver (Vijayenthiran Subramaniam)
- Drop references to non-functional 01.org/linux-acpi web site from
MAINTAINERS and Kconfig help texts (Rafael Wysocki)
- Replace strlcpy() with unused retval with strscpy() in the ACPI
support code (Wolfram Sang)
- Do not initialize ret in main() in the pfrut utility (Shi junming)
- Drop useless ACPI DSDT override documentation (Rafael Wysocki)
- Fix a few typos and wording mistakes in the ACPI device enumeration
documentation (Jean Delvare)
- Introduce acpi_dev_uid_to_integer() to convert a _UID string into
an integer value (Andy Shevchenko)
- Use acpi_dev_uid_to_integer() in several places to unify _UID
handling (Andy Shevchenko)
- Drop unused pnpid32_to_pnpid() declaration from PNP code (Gaosheng
Cui)"
* tag 'acpi-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (79 commits)
ACPI: LPSS: Deduplicate skipping device in acpi_lpss_create_device()
ACPI: LPSS: Replace loop with first entry retrieval
ACPI: x86: s2idle: Add another ID to s2idle_dmi_table
ACPI: x86: s2idle: Fix a NULL pointer dereference
MAINTAINERS: Drop records pointing to 01.org/linux-acpi
ACPI: Kconfig: Drop link to https://01.org/linux-acpi
ACPI: docs: Drop useless DSDT override documentation
ACPI: DPTF: Drop stale link from Kconfig help
ACPI: x86: s2idle: Add a quirk for ASUSTeK COMPUTER INC. ROG Flow X13
ACPI: x86: s2idle: Add a quirk for Lenovo Slim 7 Pro 14ARH7
ACPI: x86: s2idle: Add a quirk for ASUS ROG Zephyrus G14
ACPI: x86: s2idle: Add a quirk for ASUS TUF Gaming A17 FA707RE
ACPI: x86: s2idle: Add module parameter to prefer Microsoft GUID
ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt
ACPI: x86: s2idle: Move _HID handling for AMD systems into structures
platform/x86: int3472: Add board data for Surface Go2 IR camera
platform/x86: int3472: Support multiple gpio lookups in board data
platform/x86: int3472: Support multiple clock consumers
ACPI: bus: Add iterator for dependent devices
ACPI: scan: Add acpi_dev_get_next_consumer_dev()
...
Merge ACPI _UID handling unification changes for 6.1-rc1:
- Introduce acpi_dev_uid_to_integer() to convert a _UID string into an
integer value (Andy Shevchenko).
- Use acpi_dev_uid_to_integer() in several places to unify _UID
handling (Andy Shevchenko).
* acpi-uid:
efi/dev-path-parser: Refactor _UID handling to use acpi_dev_uid_to_integer()
spi: pxa2xx: Refactor _UID handling to use acpi_dev_uid_to_integer()
perf: qcom_l2_pmu: Refactor _UID handling to use acpi_dev_uid_to_integer()
i2c: mlxbf: Refactor _UID handling to use acpi_dev_uid_to_integer()
i2c: amd-mp2-plat: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: x86: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: LPSS: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: utils: Add acpi_dev_uid_to_integer() helper to get _UID as integer
Merge miscellaneous ACPI material, ACPI tools changes and ACPI
documentation updates for 6.1-rc1:
- Drop references to non-functional 01.org/linux-acpi web site from
MAINTAINERS and Kconfig help texts (Rafael Wysocki).
- Replace strlcpy() with unused retval with strscpy() in the ACPI
support code (Wolfram Sang).
- Do not initialize ret in main() in the pfrut utility (Shi junming).
- Drop useless ACPI DSDT override documentation (Rafael Wysocki).
- Fix a few typos and wording mistakes in the ACPI device enumeration
documentation (Jean Delvare).
* acpi-misc:
MAINTAINERS: Drop records pointing to 01.org/linux-acpi
ACPI: Kconfig: Drop link to https://01.org/linux-acpi
ACPI: DPTF: Drop stale link from Kconfig help
ACPI: move from strlcpy() with unused retval to strscpy()
* acpi-tools:
ACPI: tools: pfrut: Do not initialize ret in main()
* acpi-docs:
ACPI: docs: Drop useless DSDT override documentation
ACPI: docs: enumeration: Fix a few typos and wording mistakes
Merge EC, AC, fan and backlight driver changes and ACPI AMBA support
update for 6.1-rc1:
- Drop unneeded result variable from ec_write() (ye xingchen).
- Remove the leftover struct acpi_ac_bl from the ACPI AC driver (Hanjun
Guo).
- Reorder symbols to get rid of a few forward declarations in the ACPI
fan driver (Uwe Kleine-König).
- Add Toshiba Satellite/Portege Z830 ACPI backlight quirk (Arvid
Norlander).
- Add ARM DMA-330 controller to the supported list in the ACPI AMBA
driver (Vijayenthiran Subramaniam).
* acpi-ec:
ACPI: EC: Drop unneeded result variable from ec_write()
* acpi-ac:
ACPI: AC: Remove the leftover struct acpi_ac_bl
* acpi-fan:
ACPI: fan: Reorder symbols to get rid of a few forward declarations
* acpi-video:
ACPI: video: Add Toshiba Satellite/Portege Z830 quirk
* acpi-amba:
ACPI: AMBA: Add ARM DMA-330 controller to the supported list
Merge new material related to CPPC, PCC, APEI and OSI strings handling
for 6.1-rc1:
- Disable frequency invariance in the CPPC library if registers used
by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton).
- Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan).
- Fix Tx acknowledge in the PCC address space handler (Huisong Li).
- Use wait_for_completion_timeout() for PCC mailbox operations (Huisong
Li).
- Release resources on PCC address space setup failure path (Rafael
Mendonca).
- Remove unneeded result variables from APEI code (ye xingchen).
- Print total number of records found during BERT log parsing (Dmitry
Monakhov).
- Drop support for 3 _OSI strings that should not be necessary any
more and update documentation on custom _OSI strings so that adding
new ones is not encouraged any more (Mario Limonciello).
* acpi-cppc:
ACPI: CPPC: Disable FIE if registers in PCC regions
ACPI: CPPC: Add ACPI disabled check to acpi_cpc_valid()
* acpi-pcc:
ACPI: PCC: Fix Tx acknowledge in the PCC address space handler
ACPI: PCC: replace wait_for_completion()
ACPI: PCC: Release resources on address space setup failure path
* acpi-apei:
ACPI: APEI: Remove unneeded result variables
ACPI: APEI: Add BERT error log footer
* acpi-osi:
ACPI: OSI: Update Documentation on custom _OSI strings
ACPI: OSI: Remove Linux-HPI-Hybrid-Graphics _OSI string
ACPI: OSI: Remove Linux-Lenovo-NV-HDMI-Audio _OSI string
ACPI: OSI: Remove Linux-Dell-Video _OSI string
Add a new label to deduplicate skipping device code in the
acpi_lpss_create_device(). No functional change intended.
While at it, convert the last conditional to use the classical
pattern, i.e.
if (err)
...handle err...
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After the commit 6505e452371d ("ACPI: LPSS: Use the helper
acpi_dev_get_memory_resources()") the list is empty or
contains only resource of IORESOURCE_MEM type. Hence, no
need to check for the type, and since we break after the
first found, no need to iterate over full list. That said,
replace loop with first entry retrieval.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge changes related to ACPI device enumeration and ACPI support for
platform devices for 6.1-rc1:
- Clean up ACPI platform devices support code (Andy Shevchenko, John
Garry).
- Clean up ACPI bus management code (Andy Shevchenko, ye xingchen).
- Add support for multiple DMA windows with different offsets to the
ACPI device enumeration code and use it on LoongArch (Jianmin Lv).
* acpi-scan:
LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA
ACPI: scan: Support multiple DMA windows with different offsets
* acpi-bus:
ACPI: bus: Refactor ACPI matching functions for better readability
ACPI: bus: Drop kernel doc annotation from acpi_bus_notify()
ACPI: bus: Remove the unneeded result variable
* acpi-platform:
ACPI: platform: Use PLATFORM_DEVID_NONE in acpi_create_platform_device()
ACPI: platform: Sort forbidden_id_list[] in ascending order
ACPI: platform: Use sizeof(*pointer) instead of sizeof(type)
ACPI: platform: Remove redundant print on -ENOMEM
ACPI: platform: Get rid of redundant 'else'
Merge ACPI resource management and ACPI power management chages for
6.1-rc1:
- Filter out non-memory resources in is_memory(), add a helper
function to find all memory type resources of an ACPI device object
and use that function in 3 places (Heikki Krogerus).
- Add IRQ override quirks for Asus Vivobook K3402ZA/K3502ZA and ASUS
model S5402ZA (Tamim Khan, Kellen Renshaw).
- Fix acpi_dev_state_d0() kerneldoc (Sakari Ailus).
- Fix up suspend-to-idle support on ASUS Rembrandt laptops (Mario
Limonciello).
* acpi-resource:
ACPI: resource: Add ASUS model S5402ZA to quirks
usb: typec: intel_pmc_mux: Use the helper acpi_dev_get_memory_resources()
ACPI: resource: Skip IRQ override on Asus Vivobook K3402ZA/K3502ZA
ACPI: LPSS: Use the helper acpi_dev_get_memory_resources()
ACPI: APD: Use the helper acpi_dev_get_memory_resources()
ACPI: resource: Add helper function acpi_dev_get_memory_resources()
ACPI: resource: Filter out the non memory resources in is_memory()
* acpi-pm:
ACPI: x86: s2idle: Add another ID to s2idle_dmi_table
ACPI: x86: s2idle: Fix a NULL pointer dereference
ACPI: x86: s2idle: Add a quirk for ASUSTeK COMPUTER INC. ROG Flow X13
ACPI: x86: s2idle: Add a quirk for Lenovo Slim 7 Pro 14ARH7
ACPI: x86: s2idle: Add a quirk for ASUS ROG Zephyrus G14
ACPI: x86: s2idle: Add a quirk for ASUS TUF Gaming A17 FA707RE
ACPI: x86: s2idle: Add module parameter to prefer Microsoft GUID
ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt
ACPI: x86: s2idle: Move _HID handling for AMD systems into structures
ACPI: PM: Fix acpi_dev_state_d0() kerneldoc
Merge changes regarding the management of ACPI device objects for
6.1-rc1:
- Rename ACPI device object reference counting functions (Rafael
Wysocki).
- Rearrange ACPI device object initialization code (Rafael Wysocki).
- Drop parent field from struct acpi_device (Rafael Wysocki).
- Extend the the int3472-tps68470 driver to support multiple consumers
of a single TPS68470 along with the requisite framework-level
support (Daniel Scally).
* acpi-dev:
platform/x86: int3472: Add board data for Surface Go2 IR camera
platform/x86: int3472: Support multiple gpio lookups in board data
platform/x86: int3472: Support multiple clock consumers
ACPI: bus: Add iterator for dependent devices
ACPI: scan: Add acpi_dev_get_next_consumer_dev()
ACPI: property: Use acpi_dev_parent()
ACPI: Drop redundant acpi_dev_parent() header
ACPI: PM: Fix NULL argument handling in acpi_device_get/set_power()
ACPI: Drop parent field from struct acpi_device
ACPI: scan: Eliminate __acpi_device_add()
ACPI: scan: Rearrange initialization of ACPI device objects
ACPI: scan: Rename acpi_bus_get_parent() and rearrange it
ACPI: Rename acpi_bus_get/put_acpi_device()
Ryzen 7000 (Raphael) introduced AMDI0008 for _HID. This ID was added
in commit ed470febf8 ("ACPI: PM: s2idle: Add support for upcoming AMD
uPEP HID AMDI008"), but then removed in favor of aligning all new IDs
to Rembrandt support in commit fd894f05cf ("ACPI: x86: s2idle: If a
new AMD _HID is missing assume Rembrandt").
Unfortunately there was a mistake in commit 100a573793 ("ACPI: x86:
s2idle: Move _HID handling for AMD systems into structures") that can
lead to a NULL pointer dereference accessing `dev_id->driver_data` in
the sentinel of `amd_hid_ids`. Fix this dereference.
Reported-by: Richard Gong <Richard.Gong@amd.com>
Fixes: 100a573793 ("ACPI: x86: s2idle: Move _HID handling for AMD systems into structures")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because the https://01.org/linux-acpi web site has become permanently
inaccessible, drop the remaining link to it from the ACPI Kconfig.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because https://01.org/linux-acpi web site has become permanently
inaccessible, the "Overriding DSDT" document in the kernel tree
pointing to it as the main source of information is useless (and
the config option name mentioned by it is incorrect), so drop it
and drop the pointer to it from the ACPI Kconfig.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The web site pointed to from the DPTF Kconfig help is not accessible
any more, so drop the link to it from there.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpu idle hardware workaround.
* A new Intel model number. Folks like these upstream as soon as
possible so that each developer doing feature development doesn't
need to carry their own #define.
* SGX fixes for a userspace crash and a rare kernel warning
-----BEGIN PGP SIGNATURE-----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=ULl1
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Dave Hansen:
- A performance fix for recent large AMD systems that avoids an ancient
cpu idle hardware workaround
- A new Intel model number. Folks like these upstream as soon as
possible so that each developer doing feature development doesn't
need to carry their own #define
- SGX fixes for a userspace crash and a rare kernel warning
* tag 'x86_urgent_for_v6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ACPI: processor idle: Practically limit "Dummy wait" workaround to old Intel systems
x86/sgx: Handle VA page allocation failure for EAUG on PF.
x86/sgx: Do not fail on incomplete sanitization on premature stop of ksgxd
x86/cpu: Add CPU model numbers for Meteor Lake
ASUSTeK COMPUTER INC. ROG Flow X13 has a problem with fans upon wakeup from
s2idle. In examining the ASL, functions 3 and 4 are not called in the AMD
codepath but only in the Microsoft codepath.
Add the system to the quirk list to force Microsoft codepath.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2148
Tested-by: short-circuit <davidedp91@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Lenovo Slim 7 Pro 14ARH7 has a sporadically non-functional keyboard
when resuming from s2idle. This is caused by some missing calls to the
EC that don't occur in the AMD codepath but only in the Microsoft codepath.
Add the system to the quirk list to force Microsoft codepath.
Reported-by: Travis Glenn Hansen <travisghansen@yahoo.com>
Reported-by: Sebastian S. <iam@decentr.al>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216473
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216438
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ASUS ROG Zephyrus G14 is affected by the same BIOS bug as ASUS TUF
Gaming A17 where important ASL is not called in the AMD code path.
Use the Microsoft codepath instead.
Reported-and-suggested-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Matthew Anderson <ruinairas1992@gmail.com>
Tested-by: Marko Cekrlic <marko.cekrlic.26@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ASUS TUF Gaming A17 FA707RE has problems with ACPI events after
s2idle resume. It's from a missing call to an ASL method in AMD
the s2idle calling path. Force the system to use the Microsoft
Modern Standby calling path instead.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216101
Reported-and-tested-by: catalin@antebit.com
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com> # GA402RJ
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
OEMs have made some mistakes in the past for the AMD GUID support
and not populated the method properly. To add an escape hatch for
this problem introduce a module parameter that can force using
the Microsoft GUID.
This is intentionally introduced to both Intel and AMD codepaths
to allow using the parameter as a debugging tactic on either.
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com> # GA402RJ
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A mistake was made that only AMDI0007 was set to rev of "2", but
it should have been also set for AMDI008. If an ID is missing from
the _HID table, then assume it matches Rembrandt behavior.
This implicitly means that if any other behavior changes happen
in the future missing IDs must be added to that table.
Tested-by: catalin@antebit.com
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com> # GA402RJ
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Right now the information about which cases to use for what are in a
comment, but this is error prone. Instead move all information into
a dedicated structure.
Tested-by: catalin@antebit.com
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com> # GA402RJ
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In commit b83e2b3067 ("ACPI: scan: Add function to fetch dependent
of ACPI device") we added a means of fetching the first device to
declare itself dependent on another ACPI device in the _DEP method.
One assumption in that patch was that there would only be a single
consuming device, but this has not held.
Replace that function with a new function that fetches the next consumer
of a supplier device. Where no "previous" consumer is passed in, it
behaves identically to the original function.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Asus Vivobook S5402ZA has the same keyboard issue as Asus Vivobook
K3402ZA/K3502ZA. The kernel overrides IRQ 1 to Edge_High when it
should be Active_Low.
This patch adds the S5402ZA model to the quirk list.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216158
Tested-by: Kellen Renshaw <kellen.renshaw@canonical.com>
Signed-off-by: Kellen Renshaw <kellen.renshaw@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add ACPI ID for ARM DMA-330 controller to AMBA id supported list to
allow the probing of the device.
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Return the erst_get_record_id_begin() and apei_exec_write_register()
return values directly instead of storing them in redundant local
variables.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Having the driver struct at the end of the file isn't only more usual, it
also allows to drop a few forward declarations which are just useless
repetition.
While at it also move the MODULE_... macros to the end of the file.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PCC regions utilize a mailbox to set/retrieve register values used by
the CPPC code. This is fine as long as the operations are
infrequent. With the FIE code enabled though the overhead can range
from 2-11% of system CPU overhead (ex: as measured by top) on Arm
based machines.
So, before enabling FIE assure none of the registers used by
cppc_get_perf_ctrs() are in the PCC region. Finally, add a module
parameter which can override the PCC region detection at boot or
module reload.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In DT systems configurations, of_dma_get_range() returns struct
bus_dma_region DMA regions; they are used to set-up devices
DMA windows with different offset available for translation between DMA
address and CPU address.
In ACPI systems configuration, acpi_dma_get_range() does not return
DMA regions yet and that precludes setting up the dev->dma_range_map
pointer and therefore DMA regions with multiple offsets.
Update acpi_dma_get_range() to return struct bus_dma_region
DMA regions like of_dma_get_range() does.
After updating acpi_dma_get_range(), acpi_arch_dma_setup() is changed for
ARM64, where the original dma_addr and size are removed as these
arguments are now redundant, and pass 0 and U64_MAX for dma_base
and size of arch_setup_dma_ops; this is a simplification consistent
with what other ACPI architectures also pass to iommu_setup_dma_ops().
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In commit 57a1832222 ("ACPI / x86: Introduce an
acpi_quirk_skip_acpi_ac_and_battery() helper"), the usage of struct
acpi_ac_bl was removed, but left the definition of the struct in
the file, so remove the useless code.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Dell Inspiron 14 2-in-1 has two ACPI nodes under GPP1 both with _ADR of
0, both without _HID. It's ambiguous which the kernel should take, but
it seems to take "DEV0". Unfortunately "DEV0" is missing the device
property `StorageD3Enable` which is present on "NVME".
To avoid this causing problems for suspend, add a quirk for this system
to behave like `StorageD3Enable` property was found.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216440
Reported-and-tested-by: Luya Tshimbalanga <luya@fedoraproject.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Old, circa 2002 chipsets have a bug: they don't go idle when they are
supposed to. So, a workaround was added to slow the CPU down and
ensure that the CPU waits a bit for the chipset to actually go idle.
This workaround is ancient and has been in place in some form since
the original kernel ACPI implementation.
But, this workaround is very painful on modern systems. The "inl()"
can take thousands of cycles (see Link: for some more detailed
numbers and some fun kernel archaeology).
First and foremost, modern systems should not be using this code.
Typical Intel systems have not used it in over a decade because it is
horribly inferior to MWAIT-based idle.
Despite this, people do seem to be tripping over this workaround on
AMD system today.
Limit the "dummy wait" workaround to Intel systems. Keep Modern AMD
systems from tripping over the workaround. Remotely modern Intel
systems use intel_idle instead of this code and will, in practice,
remain unaffected by the dummy wait.
Reported-by: K Prateek Nayak <kprateek.nayak@amd.com>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/all/20220921063638.2489-1-kprateek.nayak@amd.com/
Link: https://lkml.kernel.org/r/20220922184745.3252932-1-dave.hansen@intel.com
The PCI device returned by acpi_get_pci_dev() needs to be registered,
so if it corresponds to an ACPI device object, the struct acpi_device
representing that object must be registered too and, moreover, it
should be the ACPI companion of the given PCI device. Thus it should
be sufficient to look for it in the ACPI device object's list of
physical nodes associated with it.
Modify the code accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, mbox_client_txdone() is called from the PCC address space
handler and that expects the user the Tx state machine to be controlled
by the client which is not the case and the below warning is thrown:
| PCCT: Client can't run the TX ticker
Let the controller run the state machine and the end of Tx can be
acknowledge by calling mbox_chan_txdone() instead.
Fixes: 77e2a04745 ("ACPI: PCC: Implement OperationRegion handler for the PCC Type 3 subtype")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, the function waiting for completion of mailbox operation is
'wait_for_completion()'. The PCC method will be permanently blocked if
this mailbox message fails to execute. So this patch replaces it with
'wait_for_completion_timeout()'. And set the timeout interval to an
arbitrary retries on top of nominal to prevent the remote processor is
slow to respond to PCC commands.
Fixes: 77e2a04745 ("ACPI: PCC: Implement OperationRegion handler for the PCC Type 3 subtype")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The allocated memory for the pcc_data struct doesn't get freed under an
error path in pcc_mbox_request_channel() or acpi_os_ioremap(). Also, the
PCC mailbox channel doesn't get freed under an error path in
acpi_os_ioremap().
Fixes: 77e2a04745 ("ACPI: PCC: Implement OperationRegion handler for the PCC Type 3 subtype")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Remove unused macro dev_pmt() and redundant 'HMAT' prefix from
pr_*() calls.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
