In order to debug problems with file size being reported incorrectly
temporarily (in this case xfstest generic/584 intermittent failure)
we need to add trace point for the non-compounded code path where
we set the file size (SMB2_set_eof). The new trace point is:
"smb3_set_eof"
Here is sample output from the tracepoint:
TASK-PID CPU# ||||| TIMESTAMP FUNCTION
| | | ||||| | |
xfs_io-75403 [002] ..... 95219.189835: smb3_set_eof: xid=221 sid=0xeef1cbd2 tid=0x27079ee6 fid=0x52edb58c offset=0x100000
aio-dio-append--75418 [010] ..... 95219.242402: smb3_set_eof: xid=226 sid=0xeef1cbd2 tid=0x27079ee6 fid=0xae89852d offset=0x0
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 17de1e559c ("selftests: clarify common error when running
gup_test") had most of its hunks dropped due to a conflict with another
patch accepted into Linux around the same time that implemented the same
behavior as a subset of other changes.
However, the remaining hunk defines the GUP_TEST_FILE macro without
making use of it. This patch makes use of the macro in the two relevant
places.
Furthermore, the above mentioned commit's log message erroneously describes
the changes that were dropped from the patch.
This patch corrects the record.
Fixes: 17de1e559c ("selftests: clarify common error when running gup_test")
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Nico Pache <npache@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
BFQ uses io_start_time_ns. That member variable is only set if I/O
statistics are enabled. Hence this patch that enables I/O statistics
at the time BFQ is associated with a request queue.
Compile-tested only.
Reported-by: Cixi Geng <cixi.geng1@unisoc.com>
Cc: Cixi Geng <cixi.geng1@unisoc.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Paolo Valente <paolo.valente@unimore.it>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=K9Im
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20220616' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single audit patch to fix a problem where we were not properly
freeing memory allocated when recording information related to a
module load"
* tag 'audit-pr-20220616' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: free module name
-----BEGIN PGP SIGNATURE-----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=JqDZ
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20220616' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A single SELinux patch to fix memory leaks when mounting filesystems
with SELinux mount options"
* tag 'selinux-pr-20220616' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: free contexts previously transferred in selinux_add_opt()
Some additionals comments and notes from autobuilders received after the
series got applied, warranted some changes.
* commit '924cbb8cbe3460ea192e6243017ceb0ceb255b1b':
riscv: Improve description for RISCV_ISA_SVPBMT Kconfig symbol
riscv: drop cpufeature_apply_feature tracking variable
riscv: fix dependency for t-head errata
This improves the symbol's description to make it easier for
people to understand what it is about.
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220526205646.258337-3-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The variable was tracking which feature patches got applied
but that information was never actually used - and thus resulted
in a warning as well.
Drop the variable.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220526205646.258337-2-heiko@sntech.de
Fixes: ff689fd21c ("riscv: add RISC-V Svpbmt extension support")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
alternatives only work correctly on non-xip-kernels and while the
selected alternative-symbol has the correct dependency the symbol
selecting it also needs that dependency.
So add the missing dependency to the T-Head errata Kconfig symbol.
Reported-by: kernel test robot <yujie.liu@intel.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220526205646.258337-5-heiko@sntech.de
Fixes: a35707c3d8 ("riscv: add memory-type errata for T-Head")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
A single fix for mpfs.dtsi:
- The sifive pdma entry fell through the cracks between versions of my
dt patches & I gave Zong the wrong conflict resolution, so it is
added back.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCYquhFQAKCRB4tDGHoIJi
0vdLAP0TlxTgiweNIuj8NLw0eQ1W+NfFApEYx4ZXy9/Gtz1/PAEAibIcaOY9eWmy
W7TBJ/JAlhx+7AKm7WhiY2rE5vxo2g0=
=7SX0
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xLlB
-----END PGP SIGNATURE-----
Merge tag 'dt-fixes-for-palmer-5.19-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux into fixes
Microchip RISC-V devicetree fixes for 5.19-rc3
A single fix for mpfs.dtsi:
- The sifive pdma entry fell through the cracks between versions of my
dt patches & I gave Zong the wrong conflict resolution, so it is
added back.
* tag 'dt-fixes-for-palmer-5.19-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: microchip: re-add pdma to mpfs device tree
cached operations sometimes need to do invalid operations (e.g. read
on a write only file)
Historic fscache had added a "writeback fid", a special handle opened
RW as root, for this. The conversion to new fscache missed that bit.
This commit reinstates a slightly lesser variant of the original code
that uses the writeback fid for partial pages backfills if the regular
user fid had been open as WRONLY, and thus would lack read permissions.
Link: https://lkml.kernel.org/r/20220614033802.1606738-1-asmadeus@codewreck.org
Fixes: eb497943fa ("9p: Convert to using the netfs helper lib to do reads and caching")
Cc: stable@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Reported-By: Christian Schoenebeck <linux_oss@crudebyte.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Tested-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
commit 364b61818f ("blk-mq: clearing flush request reference in
tags->rqs[]") is added to clear the to-be-free flush request from
tags->rqs[] for avoiding use-after-free on the flush rq.
Yu Kuai reported that blk_mq_clear_flush_rq_mapping() slows down boot time
by ~8s because running scsi probe which may create and remove lots of
unpresent LUNs on megaraid-sas which uses BLK_MQ_F_TAG_HCTX_SHARED and
each request queue has lots of hw queues.
Improve the situation by not running blk_mq_clear_flush_rq_mapping if
disk isn't added when there can't be any flush request issued.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220616014401.817001-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
q->elevator is referred in blk_mq_has_sqsched() without any protection,
no .q_usage_counter is held, no queue srcu and rcu read lock is held,
so potential use-after-free may be triggered.
Fix the issue by adding one queue flag for checking if the elevator
uses single queue style dispatch. Meantime the elevator feature flag
of ELEVATOR_F_MQ_AWARE isn't needed any more.
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220616014401.817001-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
elevator can be tore down by sysfs switch interface or disk release, so
hold ->sysfs_lock before referring to q->elevator, then potential
use-after-free can be avoided.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220616014401.817001-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch prevents that test nvme/004 triggers the following:
UBSAN: array-index-out-of-bounds in block/blk-mq.h:135:9
index 512 is out of range for type 'long unsigned int [512]'
Call Trace:
show_stack+0x52/0x58
dump_stack_lvl+0x49/0x5e
dump_stack+0x10/0x12
ubsan_epilogue+0x9/0x3b
__ubsan_handle_out_of_bounds.cold+0x44/0x49
blk_mq_alloc_request_hctx+0x304/0x310
__nvme_submit_sync_cmd+0x70/0x200 [nvme_core]
nvmf_connect_io_queue+0x23e/0x2a0 [nvme_fabrics]
nvme_loop_connect_io_queues+0x8d/0xb0 [nvme_loop]
nvme_loop_create_ctrl+0x58e/0x7d0 [nvme_loop]
nvmf_create_ctrl+0x1d7/0x4d0 [nvme_fabrics]
nvmf_dev_write+0xae/0x111 [nvme_fabrics]
vfs_write+0x144/0x560
ksys_write+0xb7/0x140
__x64_sys_write+0x42/0x50
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Fixes: 20e4d81393 ("blk-mq: simplify queue mapping & schedule with each possisble CPU")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220615210004.1031820-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When return on an error path, file handle need to be closed
to prevent resource leak
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building selftests/dma:
$ make -C tools/testing/selftests TARGETS=dma
I hit the following compilation error:
dma_map_benchmark.c:13:10: fatal error: linux/map_benchmark.h: No such file or directory
#include <linux/map_benchmark.h>
^~~~~~~~~~~~~~~~~~~~~~~
dma/Makefile does not include the map_benchmark.h path, so add
more including path, and fix include order in dma_map_benchmark.c
Fixes: 8ddde07a3d ("dma-mapping: benchmark: extract a common header file for map_benchmark definition")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Current release - regressions:
- Revert "net: Add a second bind table hashed by port and address",
needs more work
- amd-xgbe: use platform_irq_count(), static setup of IRQ resources
had been removed from DT core
- dts: at91: ksz9477_evb: add phy-mode to fix port/phy validation
Current release - new code bugs:
- hns3: modify the ring param print info
Previous releases - always broken:
- axienet: make the 64b addressable DMA depends on 64b architectures
- iavf: fix issue with MAC address of VF shown as zero
- ice: fix PTP TX timestamp offset calculation
- usb: ax88179_178a needs FLAG_SEND_ZLP
Misc:
- document some net.sctp.* sysctls
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JSV9
-----END PGP SIGNATURE-----
Merge tag 'net-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Mostly driver fixes.
Current release - regressions:
- Revert "net: Add a second bind table hashed by port and address",
needs more work
- amd-xgbe: use platform_irq_count(), static setup of IRQ resources
had been removed from DT core
- dts: at91: ksz9477_evb: add phy-mode to fix port/phy validation
Current release - new code bugs:
- hns3: modify the ring param print info
Previous releases - always broken:
- axienet: make the 64b addressable DMA depends on 64b architectures
- iavf: fix issue with MAC address of VF shown as zero
- ice: fix PTP TX timestamp offset calculation
- usb: ax88179_178a needs FLAG_SEND_ZLP
Misc:
- document some net.sctp.* sysctls"
* tag 'net-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (31 commits)
net: axienet: add missing error return code in axienet_probe()
Revert "net: Add a second bind table hashed by port and address"
net: ax25: Fix deadlock caused by skb_recv_datagram in ax25_recvmsg
net: usb: ax88179_178a needs FLAG_SEND_ZLP
MAINTAINERS: add include/dt-bindings/net to NETWORKING DRIVERS
ARM: dts: at91: ksz9477_evb: fix port/phy validation
net: bgmac: Fix an erroneous kfree() in bgmac_remove()
ice: Fix memory corruption in VF driver
ice: Fix queue config fail handling
ice: Sync VLAN filtering features for DVM
ice: Fix PTP TX timestamp offset calculation
mlxsw: spectrum_cnt: Reorder counter pools
docs: networking: phy: Fix a typo
amd-xgbe: Use platform_irq_count()
octeontx2-vf: Add support for adaptive interrupt coalescing
xilinx: Fix build on x86.
net: axienet: Use iowrite64 to write all 64b descriptor pointers
net: axienet: make the 64b addresable DMA depends on 64b archectures
net: hns3: fix tm port shapping of fibre port is incorrect after driver initialization
net: hns3: fix PF rss size initialization bug
...
It should return error code in error path in axienet_probe().
Fixes: 00be43a74c ("net: axienet: make the 64b addresable DMA depends on 64b archectures")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220616062917.3601-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We currently export set_cpu_feature() to modules but there are no in tree
users that can be built as modules and it is hard to see cases where it
would make sense for there to be any such users. Remove the export to avoid
anyone else having to worry about why it is there and ensure that any users
that do get added get a bit more visiblity.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220615191504.626604-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When delayed allocation is disabled (either through mount option or
because we are running low on free space), ext4_write_begin() allocates
blocks with EXT4_GET_BLOCKS_IO_CREATE_EXT flag. With this flag extent
merging is disabled and since ext4_write_begin() is called for each page
separately, we end up with a *lot* of 1 block extents in the extent tree
and following writeback is writing 1 block at a time which results in
very poor write throughput (4 MB/s instead of 200 MB/s). These days when
ext4_get_block_unwritten() is used only by ext4_write_begin(),
ext4_page_mkwrite() and inline data conversion, we can safely allow
extent merging to happen from these paths since following writeback will
happen on different boundaries anyway. So use
EXT4_GET_BLOCKS_CREATE_UNRIT_EXT instead which restores the performance.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220520111402.4252-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We have already check the io_error and uptodate flag before submitting
the superblock buffer, and re-set the uptodate flag if it has been
failed to write out. But it was lockless and could be raced by another
ext4_commit_super(), and finally trigger '!uptodate' WARNING when
marking buffer dirty. Fix it by submit buffer directly.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220520023216.3065073-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
io_req_task_prio_work_add has a strict assumption that it will only be
used with io_req_task_complete. There is a codepath that assumes this is
the case and will not even call the completion function if it is hit.
For uring_cmd with an arbitrary completion function change the call to the
correct non-priority version.
Fixes: ee692a21e9 ("fs,io_uring: add infrastructure for uring-cmd")
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20220616135011.441980-1-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the description of @folio and remove @page in function kernel-doc
comment to remove warnings found by running scripts/kernel-doc, which
is caused by using 'make W=1'.
fs/jbd2/transaction.c:2149: warning: Function parameter or member
'folio' not described in 'jbd2_journal_try_to_free_buffers'
fs/jbd2/transaction.c:2149: warning: Excess function parameter 'page'
description in 'jbd2_journal_try_to_free_buffers'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220512075432.31763-1-yang.lee@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For recv/recvmsg, IO either completes immediately or gets queued for a
retry. This isn't the case for read/readv, if eg a normal file or a block
device is used. Here, an operation can get queued with the block layer.
If this happens, ring mapped buffers must get committed immediately to
avoid that the next read can consume the same buffer.
Check if we're dealing with pollable file, when getting a new ring mapped
provided buffer. If it's not, commit it immediately rather than wait post
issue. If we don't wait, we can race with completions coming in, or just
plain buffer reuse by committing after a retry where others could have
grabbed the same buffer.
Fixes: c7fb19428d ("io_uring: add support for ring mapped supplied buffers")
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
noop_backing_dev_info is used by superblocks of various
pseudofilesystems such as kdevtmpfs. After commit 10e1407310
("writeback: Fix inode->i_io_list not be protected by inode->i_lock
error") this broke because __mark_inode_dirty() started to access more
fields from noop_backing_dev_info and this led to crashes inside
locked_inode_to_wb_and_lock_list() called from __mark_inode_dirty().
Fix the problem by initializing noop_backing_dev_info before the
filesystems get mounted.
Fixes: 10e1407310 ("writeback: Fix inode->i_io_list not be protected by inode->i_lock error")
Reported-and-tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reported-and-tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
We got issue as follows:
[home]# mount /dev/sdd test
[home]# cd test
[test]# ls
dir1 lost+found
[test]# rmdir dir1
ext2_empty_dir: inject fault
[test]# ls
lost+found
[test]# cd ..
[home]# umount test
[home]# fsck.ext2 -fn /dev/sdd
e2fsck 1.42.9 (28-Dec-2013)
Pass 1: Checking inodes, blocks, and sizes
Inode 4065, i_size is 0, should be 1024. Fix? no
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Unconnected directory inode 4065 (/???)
Connect to /lost+found? no
'..' in ... (4065) is / (2), should be <The NULL inode> (0).
Fix? no
Pass 4: Checking reference counts
Inode 2 ref count is 3, should be 4. Fix? no
Inode 4065 ref count is 2, should be 3. Fix? no
Pass 5: Checking group summary information
/dev/sdd: ********** WARNING: Filesystem still has errors **********
/dev/sdd: 14/128016 files (0.0% non-contiguous), 18477/512000 blocks
Reason is same with commit 7aab5c84a0. We can't assume directory
is empty when read directory entry failed.
Link: https://lore.kernel.org/r/20220615090010.1544152-1-yebin10@huawei.com
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
It is vitally important that we preserve the state of the NREXT64 inode
flag when we're changing the other flags2 fields.
Fixes: 9b7d16e34b ("xfs: Introduce XFS_DIFLAG2_NREXT64 and associated helpers")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
The variable @args is fed to a tracepoint, and that's the only place
it's used. This is fine for the kernel, but for userspace, tracepoints
are #define'd out of existence, which results in this warning on gcc
11.2:
xfs_attr.c: In function ‘xfs_attr_node_try_addname’:
xfs_attr.c:1440:42: warning: unused variable ‘args’ [-Wunused-variable]
1440 | struct xfs_da_args *args = attr->xattri_da_args;
| ^~~~
Clean this up.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
I found a race involving the larp control knob, aka the debugging knob
that lets developers enable logging of extended attribute updates:
Thread 1 Thread 2
echo 0 > /sys/fs/xfs/debug/larp
setxattr(REPLACE)
xfs_has_larp (returns false)
xfs_attr_set
echo 1 > /sys/fs/xfs/debug/larp
xfs_attr_defer_replace
xfs_attr_init_replace_state
xfs_has_larp (returns true)
xfs_attr_init_remove_state
<oops, wrong DAS state!>
This isn't a particularly severe problem right now because xattr logging
is only enabled when CONFIG_XFS_DEBUG=y, and developers *should* know
what they're doing.
However, the eventual intent is that callers should be able to ask for
the assistance of the log in persisting xattr updates. This capability
might not be required for /all/ callers, which means that dynamic
control must work correctly. Once an xattr update has decided whether
or not to use logged xattrs, it needs to stay in that mode until the end
of the operation regardless of what subsequent parallel operations might
do.
Therefore, it is an error to continue sampling xfs_globals.larp once
xfs_attr_change has made a decision about larp, and it was not correct
for me to have told Allison that ->create_intent functions can sample
the global log incompat feature bitfield to decide to elide a log item.
Instead, create a new op flag for the xfs_da_args structure, and convert
all other callers of xfs_has_larp and xfs_sb_version_haslogxattrs within
the attr update state machine to look for the operations flag.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reset the type of the record last as the helper `audit_free_module()`
depends on it.
unreferenced object 0xffff888153b707f0 (size 16):
comm "modprobe", pid 1319, jiffies 4295110033 (age 1083.016s)
hex dump (first 16 bytes):
62 69 6e 66 6d 74 5f 6d 69 73 63 00 6b 6b 6b a5 binfmt_misc.kkk.
backtrace:
[<ffffffffa07dbf9b>] kstrdup+0x2b/0x50
[<ffffffffa04b0a9d>] __audit_log_kern_module+0x4d/0xf0
[<ffffffffa03b6664>] load_module+0x9d4/0x2e10
[<ffffffffa03b8f44>] __do_sys_finit_module+0x114/0x1b0
[<ffffffffa1f47124>] do_syscall_64+0x34/0x80
[<ffffffffa200007e>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Cc: stable@vger.kernel.org
Fixes: 12c5e81d3f ("audit: prepare audit_context for use in calling contexts beyond syscalls")
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
There are reports that the console kthreads block the global console
lock when the system is going down, for example, reboot, panic.
First part of the solution was to block kthreads in these problematic
system states so they stopped handling newly added messages.
Second part of the solution is to wait when for the kthreads when
they are actively printing. It solves the problem when a message
was printed before the system entered the problematic state and
the kthreads managed to step in.
A busy waiting has to be used because panic() can be called in any
context and in an unknown state of the scheduler.
There must be a timeout because the kthread might get stuck or sleeping
and never release the lock. The timeout 10s is an arbitrary value
inspired by the softlockup timeout.
Link: https://lore.kernel.org/r/20220610205038.GA3050413@paulmck-ThinkPad-P17-Gen-1
Link: https://lore.kernel.org/r/CAMdYzYpF4FNTBPZsEFeWRuEwSies36QM_As8osPWZSr2q-viEA@mail.gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220615162805.27962-3-pmladek@suse.com
There are known situations when the console kthreads are not
reliable or does not work in principle, for example, early boot,
panic, shutdown.
For these situations there is the direct (legacy) mode when printk() tries
to get console_lock() and flush the messages directly. It works very well
during the early boot when the console kthreads are not available at all.
It gets more complicated in the other situations when console kthreads
might be actively printing and block console_trylock() in printk().
The same problem is in the legacy code as well. Any console_lock()
owner could block console_trylock() in printk(). It is solved by
a trick that the current console_lock() owner is responsible for
printing all pending messages. It is actually the reason why there
is the risk of softlockups and why the console kthreads were
introduced.
The console kthreads use the same approach. They are responsible
for printing the messages by definition. So that they handle
the messages anytime when they are awake and see new ones.
The global console_lock is available when there is nothing
to do.
It should work well when the problematic context is correctly
detected and printk() switches to the direct mode. But it seems
that it is not enough in practice. There are reports that
the messages are not printed during panic() or shutdown()
even though printk() tries to use the direct mode here.
The problem seems to be that console kthreads become active in these
situation as well. They steel the job before other CPUs are stopped.
Then they are stopped in the middle of the job and block the global
console_lock.
First part of the solution is to block console kthreads when
the system is in a problematic state and requires the direct
printk() mode.
Link: https://lore.kernel.org/r/20220610205038.GA3050413@paulmck-ThinkPad-P17-Gen-1
Link: https://lore.kernel.org/r/CAMdYzYpF4FNTBPZsEFeWRuEwSies36QM_As8osPWZSr2q-viEA@mail.gmail.com
Suggested-by: John Ogness <john.ogness@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220615162805.27962-2-pmladek@suse.com
Two fixes for rc1 PR.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCYqoqzBIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9I3ngD/ZnreuHUG82mz8mLwiTx+cLF+4b4rGgBi
iOJUCx38KSYBALhk2ipFWJ7lCBoeokysx9S7bYVEKwQepn9jutMzmyUP
=/OV9
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two fixes for this merge window"
* tag 'tpmdd-next-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
certs: fix and refactor CONFIG_SYSTEM_BLACKLIST_HASH_LIST build
certs/blacklist_hashes.c: fix const confusion in certs blacklist
Commit a2ad63daa8 ("VFS: add FMODE_CAN_ODIRECT file flag")
added the FMODE_CAN_ODIRECT flag for NFSv3 but neglected to add
it for NFSv4.x. This causes direct io on NFSv4.x to fail open
with EINVAL:
mount -o vers=4.2 127.0.0.1:/export /mnt/nfs4
dd if=/dev/zero of=/mnt/nfs4/file.bin bs=128k count=1 oflag=direct
dd: failed to open '/mnt/nfs4/file.bin': Invalid argument
dd of=/dev/null if=/mnt/nfs4/file.bin bs=128k count=1 iflag=direct
dd: failed to open '/mnt/dir1/file1.bin': Invalid argument
Fixes: a2ad63daa8 ("VFS: add FMODE_CAN_ODIRECT file flag")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit addf466389 ("certs: Check that builtin blacklist hashes are
valid") was applied 8 months after the submission.
In the meantime, the base code had been removed by commit b8c96a6b46
("certs: simplify $(srctree)/ handling and remove config_filename
macro").
Fix the Makefile.
Create a local copy of $(CONFIG_SYSTEM_BLACKLIST_HASH_LIST). It is
included from certs/blacklist_hashes.c and also works as a timestamp.
Send error messages from check-blacklist-hashes.awk to stderr instead
of stdout.
Fixes: addf466389 ("certs: Check that builtin blacklist hashes are valid")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Mickaël Salaün <mic@linux.microsoft.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
This file fails to compile as follows:
CC certs/blacklist_hashes.o
certs/blacklist_hashes.c:4:1: error: ignoring attribute ‘section (".init.data")’ because it conflicts with previous ‘section (".init.rodata")’ [-Werror=attributes]
4 | const char __initdata *const blacklist_hashes[] = {
| ^~~~~
In file included from certs/blacklist_hashes.c:2:
certs/blacklist.h:5:38: note: previous declaration here
5 | extern const char __initconst *const blacklist_hashes[];
| ^~~~~~~~~~~~~~~~
Apply the same fix as commit 2be04df566 ("certs/blacklist_nohashes.c:
fix const confusion in certs blacklist").
Fixes: 734114f878 ("KEYS: Add a system blacklist keyring")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Mickaël Salaün <mic@linux.microsoft.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Hyper-V Isolation VM current code uses sev_es_ghcb_hv_call()
to read/write MSR via GHCB page and depends on the sev code.
This may cause regression when sev code changes interface
design.
The latest SEV-ES code requires to negotiate GHCB version before
reading/writing MSR via GHCB page and sev_es_ghcb_hv_call() doesn't
work for Hyper-V Isolation VM. Add Hyper-V ghcb related implementation
to decouple SEV and Hyper-V code. Negotiate GHCB version in the
hyperv_init() and use the version to communicate with Hyper-V
in the ghcb hv call function.
Fixes: 2ea29c5abb ("x86/sev: Save the negotiated GHCB version")
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220614014553.1915929-1-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
After successful #VE handling, tdx_handle_virt_exception() has to move
RIP to the next instruction. The handler needs to know the length of the
instruction.
If the #VE happened due to instruction execution, the GET_VEINFO TDX
module call provides info on the instruction in R10, including its length.
For #VE due to EPT violation, the info in R10 is not populand and the
kernel must decode the instruction manually to find out its length.
Restructure the code to make it explicit that the instruction length
depends on the type of #VE. Make individual #VE handlers return
the instruction length on success or -errno on failure.
[ dhansen: fix up changelog and comments ]
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220614120135.14812-3-kirill.shutemov@linux.intel.com
tdx_early_handle_ve() does not increment RIP after successfully
handling the exception. That leads to infinite loop of exceptions.
Move RIP when exceptions are successfully handled.
[ dhansen: make problem statement more clear ]
Fixes: 32e72854fa ("x86/tdx: Port I/O: Add early boot support")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lkml.kernel.org/r/20220614120135.14812-2-kirill.shutemov@linux.intel.com
bio_alloc_bioset() takes a block device, number of vectors, the
OP flags, the GFP mask and the bio set. However when the prototype
was changed, the callisite in ppl_do_flush() had the OP flags and
the GFP flags reversed. This introduced some sparse error:
drivers/md/raid5-ppl.c:632:57: warning: incorrect type in argument 3
(different base types)
drivers/md/raid5-ppl.c:632:57: expected unsigned int opf
drivers/md/raid5-ppl.c:632:57: got restricted gfp_t [usertype]
drivers/md/raid5-ppl.c:633:61: warning: incorrect type in argument 4
(different base types)
drivers/md/raid5-ppl.c:633:61: expected restricted gfp_t [usertype]
gfp_mask
drivers/md/raid5-ppl.c:633:61: got unsigned long long
The sparse error introduction may not have been reported correctly by
0day due to other work that was cleaning up other sparse errors in this
area.
Fixes: 609be10667 ("block: pass a block_device and opf to bio_alloc_bioset")
Cc: stable@vger.kernel.org # 5.18+
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
The 07reshape5intr test is broke because of below path.
md_reap_sync_thread
-> mddev_unlock
-> md_unregister_thread(&mddev->sync_thread)
And md_check_recovery is triggered by,
mddev_unlock -> md_wakeup_thread(mddev->thread)
then mddev->reshape_position is set to MaxSector in raid5_finish_reshape
since MD_RECOVERY_INTR is cleared in md_check_recovery, which means
feature_map is not set with MD_FEATURE_RESHAPE_ACTIVE and superblock's
reshape_position can't be updated accordingly.
Fixes: 8b48ec23cc ("md: don't unregister sync_thread with reconfig_mutex held")
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYqmpKwAKCRCRxhvAZXjc
ogvLAQCsgqKYjmqx1s9ta8PXH9qiTWLQh1/s3ONCAvSBe0rYRAD9HPwbUoxguqxr
T2RzjuX2+rqzA5qTErjQqVEftn7DgAo=
=+P6m
-----END PGP SIGNATURE-----
Merge tag 'fs.fixes.v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull vfs idmapping fix from Christian Brauner:
"This fixes an issue where we fail to change the group of a file when
the caller owns the file and is a member of the group to change to.
This is only relevant on idmapped mounts.
There's a detailed description in the commit message and regression
tests have been added to xfstests"
* tag 'fs.fixes.v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs: account for group membership
After commit 82f6cdcc36 ("dm: switch dm_io booleans over to proper
flags") dm_start_io_acct stopped atomically checking and setting
was_accounted, which turned into the DM_IO_ACCOUNTED flag. This opened
the possibility for a race where IO accounting is started twice for
duplicate bios. To remove the race, check the flag while holding the
io->lock.
Fixes: 82f6cdcc36 ("dm: switch dm_io booleans over to proper flags")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Steve French