Commit graph

24 commits

Author SHA1 Message Date
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Herbert Valerio Riedel
1887f517e3 [MTD] CORE mtdchar.c: fix off-by-one error in lseek()
Allow lseek(mtdchar_fd, 0, SEEK_END) to succeed, which currently fails
with EINVAL.

lseek(fd, 0, SEEK_END) should result into the same fileposition as
lseek(fd, 0, SEEK_SET) + read(fd, buf, length(fd))

Furthermore, lseek(fd, 0, SEEK_CUR) should return the current file position,
which in case of an encountered EOF should not result in EINVAL

Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-27 23:22:07 +01:00
Thomas Gleixner
7bc3312bef [MTD] NAND: Fix breakage all over the place
Following problems are addressed:

- wrong status caused early break out of nand_wait()
- removed the bogus status check in nand_wait() which
  is a relict of the abandoned support for interrupted
  erase.
- status check moved to the correct place in read_oob
- oob support for syndrom based ecc with strange layouts
- use given offset in the AUTOOOB based oob operations

Partially based on a patch from Vitaly Vool <vwool@ru.mvista.com>
Thanks to Savin Zlobec <savin@epico.si> for tracking down the
status problem.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-06-20 20:31:24 +01:00
Joern Engel
73c619ea0e [MTD] Disconnect struct mtd_info from ABI
mtdchar.c direcly copied part of struct mtd_info to userspace, thereby
implicitly making it part of the ABI.  With this patch, struct
mtd_info is independent of the ABI and can have its fields removed,
reordered, etc.

Signed-off-by: Joern Engel <joern@wh.fh-wedel.de>
2006-05-30 14:25:35 +02:00
Thomas Gleixner
f1a28c0284 [MTD] NAND Expose the new raw mode function and status info to userspace
The raw read/write access to NAND (without ECC) has been changed in the
NAND rework. Expose the new way - setting the file mode via ioctl - to
userspace. Also allow to read out the ecc statistics information so userspace
tools can see that bitflips happened and whether errors where correctable
or not. Also expose the number of bad blocks for the partition, so nandwrite
can check if the data fits into the parition before writing to it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-30 00:37:34 +02:00
Thomas Gleixner
9a1fcdfd4b [MTD] NAND Signal that a bitflip was corrected by ECC
Return -EUCLEAN on read when a bitflip was detected and corrected, so the
clients can react and eventually copy the affected block to a spare one.
Make all in kernel users aware of the change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:51 +02:00
Thomas Gleixner
8593fbc68b [MTD] Rework the out of band handling completely
Hopefully the last iteration on this!

The handling of out of band data on NAND was accompanied by tons of fruitless
discussions and halfarsed patches to make it work for a particular
problem. Sufficiently annoyed by I all those "I know it better" mails and the
resonable amount of discarded "it solves my problem" patches, I finally decided
to go for the big rework. After removing the _ecc variants of mtd read/write
functions the solution to satisfy the various requirements was to refactor the
read/write _oob functions in mtd.

The major change is that read/write_oob now takes a pointer to an operation
descriptor structure "struct mtd_oob_ops".instead of having a function with at
least seven arguments.

read/write_oob which should probably renamed to a more descriptive name, can do
the following tasks:

- read/write out of band data
- read/write data content and out of band data
- read/write raw data content and out of band data (ecc disabled)

struct mtd_oob_ops has a mode field, which determines the oob handling mode.

Aside of the MTD_OOB_RAW mode, which is intended to be especially for
diagnostic purposes and some internal functions e.g. bad block table creation,
the other two modes are for mtd clients:

MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is
described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's
up to the caller to make sure that the byte positions are not used by the ECC
placement algorithms.

MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in
the out of band area which are described by the oobfree tuples in the ecclayout
data structre which is associated to the devicee.

The decision whether data plus oob or oob only handling is done depends on the
setting of the datbuf member of the data structure. When datbuf == NULL then
the internal read/write_oob functions are selected, otherwise the read/write
data routines are invoked.

Tested on a few platforms with all variants. Please be aware of possible
regressions for your particular device / application scenario

Disclaimer: Any whining will be ignored from those who just contributed "hot
air blurb" and never sat down to tackle the underlying problem of the mess in
the NAND driver grown over time and the big chunk of work to fix up the
existing users. The problem was not the holiness of the existing MTD
interfaces. The problems was the lack of time to go for the big overhaul. It's
easy to add more mess to the existing one, but it takes alot of effort to go
for a real solution.

Improvements and bugfixes are welcome!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:51 +02:00
Thomas Gleixner
f4a43cfcec [MTD] Remove silly MTD_WRITE/READ macros
Most of those macros are unused and the used ones just obfuscate
the code. Remove them and fixup all users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:50 +02:00
Thomas Gleixner
5bd34c091a [MTD] NAND Replace oobinfo by ecclayout
The nand_oobinfo structure is not fitting the newer error correction
demands anymore. Replace it by struct nand_ecclayout and fixup the users
all over the place. Keep the nand_oobinfo based ioctl for user space
compability reasons.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:50 +02:00
Thomas Gleixner
ff268fb879 [MTD] NAND Consolidate oobinfo handling
The info structure for out of band data was copied into
the mtd structure. Make it a pointer and remove the ability
to set it from userspace. The position of ecc bytes is
defined by the hardware and should not be changed by software.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:49 +02:00
Kyungmin Park
493c646077 OneNAND: One-Time Programmable (OTP) support
One Block of the NAND Flash Array memory is reserved as
a One-Time Programmable Block memory area.
Also, 1st Block of NAND Flash Array can be used as OTP.

The OTP block can be read, programmed and locked using the same
operations as any other NAND Flash Array memory block.
OTP block cannot be erased.

OTP block is fully-guaranteed to be a valid block.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-05-12 15:35:50 +01:00
Thago Galesi
b802c07411 [PATCH] Remove unnecessary kmalloc/kfree calls in mtdchar
This patch removes repeated calls to kmalloc / kfree in mtd_write /
mtd_read functions, replacing them by a single kmalloc / kfree pair.

Signed-off-by: Thiago Galesi <thiagogalesi@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-17 17:38:15 +01:00
Thomas Gleixner
97894cda57 [MTD] core: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 13:37:38 +01:00
Thomas Gleixner
15fdc52f35 [MTD] Tidy up Tims include cleanup
While we are at it, reorder the includes and
remove the silly /* TASK */ comment

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 00:14:42 +01:00
Thomas Gleixner
2fc2991175 Merge branch 'master' of /home/tglx/work/mtd/git/linux-2.6.git/ 2005-11-06 15:36:37 +01:00
Tim Schmielau
4e57b68178 [PATCH] fix missing includes
I recently picked up my older work to remove unnecessary #includes of
sched.h, starting from a patch by Dave Jones to not include sched.h
from module.h. This reduces the number of indirect includes of sched.h
by ~300. Another ~400 pointless direct includes can be removed after
this disentangling (patch to follow later).
However, quite a few indirect includes need to be fixed up for this.

In order to feed the patches through -mm with as little disturbance as
possible, I've split out the fixes I accumulated up to now (complete for
i386 and x86_64, more archs to follow later) and post them before the real
patch.  This way this large part of the patch is kept simple with only
adding #includes, and all hunks are independent of each other.  So if any
hunk rejects or gets in the way of other patches, just drop it.  My scripts
will pick it up again in the next round.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:32 -08:00
Greg Kroah-Hartman
53f4654272 [PATCH] Driver Core: fix up all callers of class_device_create()
The previous patch adding the ability to nest struct class_device
changed the paramaters to the call class_device_create().  This patch
fixes up all in-kernel users of the function.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:52 -07:00
Todd Poynor
8b491d7508 [MTD] mtdchar: Return EINVAL for bad seeks instead of fixing up to valid byte
mtdchar return -EINVAL for seek prior to offset 0 or to beyond the last
byte in the device/partition, similar to various other seek methods,
instead of fixing up to first or last byte.

Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-08-04 12:52:40 +02:00
Coywolf Qi Hunt
3a7a882420 [MTD] mtdchar: Return the real error code when create_class() failed
Signed-off-by: Coywolf Qi Hunt <coywolf@sosdg.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-07-04 20:49:54 +02:00
Todd Poynor
9bc7b38731 [MTD] mtdchar.c: Replace DEVFS by udev
Switch from DEVFS to udev for dynamic creation of device nodes for mtd
char devices.

Creates a new LDM class "mtd" with writeable and read-only devices
registered for each mtdchar device.

From: Paolo Galtieri <pgaltieri@mvista.com>
Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-07-01 11:05:46 +02:00
Nicolas Pitre
81dba48879 [MTD] Reset file position when switching OTP mode
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23 13:07:33 +02:00
Nicolas Pitre
045e9a5d51 [MTD] Unabuse file-f_mode for OTP purpose
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23 12:26:40 +02:00
Nicolas Pitre
31f4233bae [MTD] User interface to Protection Registers
This is implemented using a ioctl to switch the MTD char device into
one of the different OTP "modes", at which point read/write/seek can
operate on the selected OTP area.  Also some extra ioctls to query
for size and lock protection segments or groups.  Some example user
space utilities are provided.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23 12:26:04 +02:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00