Writing over /proc/sys/net/ipv6/conf/default/disable_ipv6
does not need to hold RTNL.
v3: remove a wrong change (Jakub Kicinski feedback)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
disable_ipv6 is read locklessly, add appropriate READ_ONCE()
and WRITE_ONCE() annotations.
v2: do not preload net before rtnl_trylock() in
addrconf_disable_ipv6() (Jiri)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- mgmt: Fix limited discoverable off timeout
- hci_qca: Set BDA quirk bit if fwnode exists in DT
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_sync: Check the correct flag before starting a scan
- Enforce validation on max value of connection interval
- hci_sync: Fix accept_list when attempting to suspend
- hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
- Avoid potential use-after-free in hci_error_reset
- rfcomm: Fix null-ptr-deref in rfcomm_check_security
- hci_event: Fix wrongly recorded wakeup BD_ADDR
- qca: Fix wrong event type for patch config command
- qca: Fix triggering coredump implementation
-----BEGIN PGP SIGNATURE-----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=ZpLZ
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- mgmt: Fix limited discoverable off timeout
- hci_qca: Set BDA quirk bit if fwnode exists in DT
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_sync: Check the correct flag before starting a scan
- Enforce validation on max value of connection interval
- hci_sync: Fix accept_list when attempting to suspend
- hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
- Avoid potential use-after-free in hci_error_reset
- rfcomm: Fix null-ptr-deref in rfcomm_check_security
- hci_event: Fix wrongly recorded wakeup BD_ADDR
- qca: Fix wrong event type for patch config command
- qca: Fix triggering coredump implementation
* tag 'for-net-2024-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: qca: Fix triggering coredump implementation
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Bluetooth: qca: Fix wrong event type for patch config command
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: mgmt: Fix limited discoverable off timeout
Bluetooth: hci_event: Fix wrongly recorded wakeup BD_ADDR
Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security
Bluetooth: hci_sync: Fix accept_list when attempting to suspend
Bluetooth: Avoid potential use-after-free in hci_error_reset
Bluetooth: hci_sync: Check the correct flag before starting a scan
Bluetooth: hci_bcm4377: do not mark valid bd_addr as invalid
====================
Link: https://lore.kernel.org/r/20240228145644.2269088-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the decrypt request goes to the backlog and crypto_aead_decrypt
returns -EBUSY, tls_do_decryption will wait until all async
decryptions have completed. If one of them fails, tls_do_decryption
will return -EBADMSG and tls_decrypt_sg jumps to the error path,
releasing all the pages. But the pages have been passed to the async
callback, and have already been released by tls_decrypt_done.
The only true async case is when crypto_aead_decrypt returns
-EINPROGRESS. With -EBUSY, we already waited so we can tell
tls_sw_recvmsg that the data is available for immediate copy, but we
need to notify tls_decrypt_sg (via the new ->async_done flag) that the
memory has already been released.
Fixes: 8590541473 ("net: tls: handle backlogging of crypto requests")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/4755dd8d9bebdefaa19ce1439b833d6199d4364c.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we're not doing async, the handling is much simpler. There's no
reference counting, we just need to wait for the completion to wake us
up and return its result.
We should preferably also use a separate crypto_wait. I'm not seeing a
UAF as I did in the past, I think aec7961916 ("tls: fix race between
async notify and socket close") took care of it.
This will make the next fix easier.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/47bde5f649707610eaef9f0d679519966fc31061.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we peek from 2 records with a currently empty rx_list, and the
first record is decrypted synchronously but the second record is
decrypted async, the following happens:
1. decrypt record 1 (sync)
2. copy from record 1 to the userspace's msg
3. queue the decrypted record to rx_list for future read(!PEEK)
4. decrypt record 2 (async)
5. queue record 2 to rx_list
6. call process_rx_list to copy data from the 2nd record
We currently pass copied=0 as skip offset to process_rx_list, so we
end up copying once again from the first record. We should skip over
the data we've already copied.
Seen with selftest tls.12_aes_gcm.recv_peek_large_buf_mult_recs
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/1b132d2b2b99296bfde54e8a67672d90d6d16e71.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With mixed sync/async decryption, or failures of crypto_aead_decrypt,
we increment decrypt_pending but we never do the corresponding
decrement since tls_decrypt_done will not be called. In this case, we
should decrement decrypt_pending immediately to avoid getting stuck.
For example, the prequeue prequeue test gets stuck with mixed
modes (one async decrypt + one sync decrypt).
Fixes: 94524d8fc9 ("net/tls: Add support for async decryption of tls records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/c56d5fc35543891d5319f834f25622360e1bfbec.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move rxrpc_send_ACK() to output.c to so that it is with
rxrpc_send_ack_packet() prior to merging the two.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Don't pick values out of the wire header in rxkad when setting up DATA
packet security, but rather use other sources. This makes it easier to get
rid of txb->wire.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Split (sub)packet preparation and timestamping out of the DATA packet
transmission function to make it easier to glue multiple txbufs together
into a jumbo DATA packet. This will require preparation and timestamping
of all the subpackets in a txbuf, and these functions provide convenient
points to place the required iteration.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Add a kvec[] to the rxrpc_txbuf struct to point to the contributory buffers
for a packet. Start with just a single element for now, but this will be
expanded later.
Make the ACK sending function use it, which means that rxrpc_fill_out_ack()
doesn't need to return the size of the sack table, padding and trailer.
Make the data sending code use it, both in where sendmsg() packages code up
into txbufs and where those txbufs are transmitted.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Merge together the DF and non-DF branches of the transmission function and
always set the flag to the right thing before transmitting. If we see
-EMSGSIZE from udp_sendmsg(), turn off DF and retry.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Don't reset the DF flag after transmission, but rather set it when needed
since it should be a fast op now that we call IP directly.
This includes turning it off for RESPONSE packets and, for the moment, ACK
packets. In future, we will need to turn it on for ACK packets used to do
path MTU discovery.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
call->tx_transmitted and call->acks_prev_seq don't need to be managed with
cmpxchg() and barriers as it's only used within the singular I/O thread.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Strip the atomic ops and barriering off of the call timer tracking as this
is handled solely within the I/O thread, except for expect_term_by which is
set by sendmsg().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
From AFS-3.3 a trailer containing extra info was added to the ACK packet
format - but AF_RXRPC has the names of some of the fields mixed up compared
to other AFS implementations.
Rename the struct and the fields to make them match.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Add a field to rxrpc_txbuf in which to store the checksum to go in the
header as this may get overwritten in the wire header struct when
transmitting as part of a jumbo packet.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Convert the transmission buffer flags into a mask and use | and & rather
than bitops functions (atomic ops are not required as only the I/O thread
can manipulate them once submitted for transmission).
The bottom byte can then correspond directly to the Rx protocol header
flags.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Each Rx protocol packet contains a per-connection monotonically increasing
serial number used to correlate outgoing messages with their replies -
something that can be used for RTT calculation.
Note this value in the rxrpc_txbuf struct in addition to the wire header
and then log it in the rxrpc_retransmit trace for reference.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
If the driver is using the network core allocation mechanism, by setting
NETDEV_PCPU_STAT_TSTATS, as this driver is, then, it doesn't need to set
the dev_get_tstats64() generic .ndo_get_stats64 function pointer. Since
the network core calls it automatically, and .ndo_get_stats64 should
only be set if the driver needs special treatment.
This simplifies the driver, since all the generic statistics is now
handled by core.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the network driver is relying in the net core to do stats allocation,
then we want to dev_get_tstats64() instead of netdev_stats_to_stats64(),
since there are per-cpu stats that needs to be taken in consideration.
This will also simplify the drivers in regard to statistics. Once the
driver sets NETDEV_PCPU_STAT_TSTATS, it doesn't not need to allocate the
stacks, neither it needs to set `.ndo_get_stats64 = dev_get_tstats64`
for the generic stats collection function anymore.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=2BRo
-----END PGP SIGNATURE-----
Merge tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
Patch #1 restores NFPROTO_INET with nft_compat, from Ignat Korchagin.
Patch #2 fixes an issue with bridge netfilter and broadcast/multicast
packets.
There is a day 0 bug in br_netfilter when used with connection tracking.
Conntrack assumes that an nf_conn structure that is not yet added to
hash table ("unconfirmed"), is only visible by the current cpu that is
processing the sk_buff.
For bridge this isn't true, sk_buff can get cloned in between, and
clones can be processed in parallel on different cpu.
This patch disables NAT and conntrack helpers for multicast packets.
Patch #3 adds a selftest to cover for the br_netfilter bug.
netfilter pull request 24-02-29
* tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
====================
Link: https://lore.kernel.org/r/20240229000135.8780-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Current HSR implementation uses following supervisory frame (even for
HSRv1 the HSR tag is not is not present):
00000000: 01 15 4e 00 01 2d XX YY ZZ 94 77 10 88 fb 00 01
00000010: 7e 1c 17 06 XX YY ZZ 94 77 10 1e 06 XX YY ZZ 94
00000020: 77 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 00 00 00 00 00 00 00 00
The current code adds extra two bytes (i.e. sizeof(struct hsr_sup_tlv))
when offset for skb_pull() is calculated.
This is wrong, as both 'struct hsrv1_ethhdr_sp' and 'hsrv0_ethhdr_sp'
already have 'struct hsr_sup_tag' defined in them, so there is no need
for adding extra two bytes.
This code was working correctly as with no RedBox support, the check for
HSR_TLV_EOT (0x00) was off by two bytes, which were corresponding to
zeroed padded bytes for minimal packet size.
Fixes: eafaa88b3e ("net: hsr: Add support for redbox supervision frames")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228085644.3618044-1-lukma@denx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The input parameter 'level' in do_raw_set/getsockopt() is not used.
Therefore, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228072505.640550-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
I missed that inet6_dump_addr() is calling in6_dump_addrs()
from two points.
First one under RTNL protection, and second one under rcu_read_lock().
Since we want to remove RTNL use from inet6_dump_addr() very soon,
no longer assume in6_dump_addrs() is protected by RTNL (even
if this is still the case).
Use rcu_read_lock() earlier to fix this lockdep splat:
WARNING: suspicious RCU usage
6.8.0-rc5-syzkaller-01618-gf8cbf6bde4c8 #0 Not tainted
net/ipv6/addrconf.c:5317 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by syz-executor.2/8834:
#0: ffff88802f554678 (nlk_cb_mutex-ROUTE){+.+.}-{3:3}, at: __netlink_dump_start+0x119/0x780 net/netlink/af_netlink.c:2338
#1: ffffffff8f377a88 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0x676/0xda0 net/netlink/af_netlink.c:2265
#2: ffff88807e5f0580 (&ndev->lock){++--}-{2:2}, at: in6_dump_addrs+0xb8/0x1de0 net/ipv6/addrconf.c:5279
stack backtrace:
CPU: 1 PID: 8834 Comm: syz-executor.2 Not tainted 6.8.0-rc5-syzkaller-01618-gf8cbf6bde4c8 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106
lockdep_rcu_suspicious+0x220/0x340 kernel/locking/lockdep.c:6712
in6_dump_addrs+0x1b47/0x1de0 net/ipv6/addrconf.c:5317
inet6_dump_addr+0x1597/0x1690 net/ipv6/addrconf.c:5428
netlink_dump+0x6a6/0xda0 net/netlink/af_netlink.c:2266
__netlink_dump_start+0x59d/0x780 net/netlink/af_netlink.c:2374
netlink_dump_start include/linux/netlink.h:340 [inline]
rtnetlink_rcv_msg+0xcf7/0x10d0 net/core/rtnetlink.c:6555
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2547
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8e0/0xcb0 net/netlink/af_netlink.c:1902
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
Fixes: c3718936ec ("ipv6: anycast: complete RCU handling of struct ifacaddr6")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227222259.4081489-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_defer_free_flush() is currently called from net_rx_action()
and napi_threaded_poll().
We should also call it from __napi_busy_loop() otherwise
there is the risk the percpu queue can grow until an IPI
is forced from skb_attempt_defer_free() adding a latency spike.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Samiullah Khawaja <skhawaja@google.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227210105.3815474-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If br_multicast_init_stats() fails, there is no need to set lockdep
classes. Just return from the error path.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227182338.2739884-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the bridge driver and leverage the network
core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227182338.2739884-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the commit d73ef2d69c ("rtnetlink: let rtnl_bridge_setlink checks
IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic
in the function `rtnl_bridge_setlink` to enable the loop to also check
the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment
removed the `break` statement and led to an error logic of the flags
writing back at the end of this function.
if (have_flags)
memcpy(nla_data(attr), &flags, sizeof(flags));
// attr should point to IFLA_BRIDGE_FLAGS NLA !!!
Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS.
However, this is not necessarily true fow now as the updated loop will let
the attr point to the last NLA, even an invalid NLA which could cause
overflow writes.
This patch introduces a new variable `br_flag` to save the NLA pointer
that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned
error logic.
Fixes: d73ef2d69c ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227121128.608110-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 446fda4f26 ("[NetLabel]: CIPSOv4 engine"), *bitmap_walk
function only returns -1. Nearly 18 years have passed, -2 scenes never
come up, so there's no need to consider it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20240227093604.3574241-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) inet_netconf_dump_devconf() can run under RCU protection
instead of RTNL.
2) properly return 0 at the end of a dump, avoiding an
an extra recvmsg() system call.
3) Do not use inet_base_seq() anymore, for_each_netdev_dump()
has nice properties. Restarting a GETDEVCONF dump if a device has
been added/removed or if net->ipv4.dev_addr_genid has changed is moot.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227092411.2315725-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"ip -4 netconf show dev XXXX" no longer acquires RTNL.
Return -ENODEV instead of -EINVAL if no netdev or idev can be found.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227092411.2315725-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add READ_ONCE() in ipv4_devconf_get() and corresponding
WRITE_ONCE() in ipv4_devconf_set()
Add IPV4_DEVCONF_RO() and IPV4_DEVCONF_ALL_RO() macros,
and use them when reading devconf fields.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227092411.2315725-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
conntrack nf_confirm logic cannot handle cloned skbs referencing
the same nf_conn entry, which will happen for multicast (broadcast)
frames on bridges.
Example:
macvlan0
|
br0
/ \
ethX ethY
ethX (or Y) receives a L2 multicast or broadcast packet containing
an IP packet, flow is not yet in conntrack table.
1. skb passes through bridge and fake-ip (br_netfilter)Prerouting.
-> skb->_nfct now references a unconfirmed entry
2. skb is broad/mcast packet. bridge now passes clones out on each bridge
interface.
3. skb gets passed up the stack.
4. In macvlan case, macvlan driver retains clone(s) of the mcast skb
and schedules a work queue to send them out on the lower devices.
The clone skb->_nfct is not a copy, it is the same entry as the
original skb. The macvlan rx handler then returns RX_HANDLER_PASS.
5. Normal conntrack hooks (in NF_INET_LOCAL_IN) confirm the orig skb.
The Macvlan broadcast worker and normal confirm path will race.
This race will not happen if step 2 already confirmed a clone. In that
case later steps perform skb_clone() with skb->_nfct already confirmed (in
hash table). This works fine.
But such confirmation won't happen when eb/ip/nftables rules dropped the
packets before they reached the nf_confirm step in postrouting.
Pablo points out that nf_conntrack_bridge doesn't allow use of stateful
nat, so we can safely discard the nf_conn entry and let inet call
conntrack again.
This doesn't work for bridge netfilter: skb could have a nat
transformation. Also bridge nf prevents re-invocation of inet prerouting
via 'sabotage_in' hook.
Work around this problem by explicit confirmation of the entry at LOCAL_IN
time, before upper layer has a chance to clone the unconfirmed entry.
The downside is that this disables NAT and conntrack helpers.
Alternative fix would be to add locking to all code parts that deal with
unconfirmed packets, but even if that could be done in a sane way this
opens up other problems, for example:
-m physdev --physdev-out eth0 -j SNAT --snat-to 1.2.3.4
-m physdev --physdev-out eth1 -j SNAT --snat-to 1.2.3.5
For multicast case, only one of such conflicting mappings will be
created, conntrack only handles 1:1 NAT mappings.
Users should set create a setup that explicitly marks such traffic
NOTRACK (conntrack bypass) to avoid this, but we cannot auto-bypass
them, ruleset might have accept rules for untracked traffic already,
so user-visible behaviour would change.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217777
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit d0009effa8 ("netfilter: nf_tables: validate NFPROTO_* family") added
some validation of NFPROTO_* families in the nft_compat module, but it broke
the ability to use legacy iptables modules in dual-stack nftables.
While with legacy iptables one had to independently manage IPv4 and IPv6
tables, with nftables it is possible to have dual-stack tables sharing the
rules. Moreover, it was possible to use rules based on legacy iptables
match/target modules in dual-stack nftables.
As an example, the program from [2] creates an INET dual-stack family table
using an xt_bpf based rule, which looks like the following (the actual output
was generated with a patched nft tool as the current nft tool does not parse
dual stack tables with legacy match rules, so consider it for illustrative
purposes only):
table inet testfw {
chain input {
type filter hook prerouting priority filter; policy accept;
bytecode counter packets 0 bytes 0 accept
}
}
After d0009effa8 ("netfilter: nf_tables: validate NFPROTO_* family") we get
EOPNOTSUPP for the above program.
Fix this by allowing NFPROTO_INET for nft_(match/target)_validate(), but also
restrict the functions to classic iptables hooks.
Changes in v3:
* clarify that upstream nft will not display such configuration properly and
that the output was generated with a patched nft tool
* remove example program from commit description and link to it instead
* no code changes otherwise
Changes in v2:
* restrict nft_(match/target)_validate() to classic iptables hooks
* rewrite example program to use unmodified libnftnl
Fixes: d0009effa8 ("netfilter: nf_tables: validate NFPROTO_* family")
Link: https://lore.kernel.org/all/Zc1PfoWN38UuFJRI@calendula/T/#mc947262582c90fec044c7a3398cc92fac7afea72 [1]
Link: https://lore.kernel.org/all/20240220145509.53357-1-ignat@cloudflare.com/ [2]
Reported-by: Jordan Griege <jgriege@cloudflare.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Right now Linux BT stack cannot pass test case "GAP/CONN/CPUP/BV-05-C
'Connection Parameter Update Procedure Invalid Parameters Central
Responder'" in Bluetooth Test Suite revision GAP.TS.p44. [0]
That was revoled by commit c49a8682fc ("Bluetooth: validate BLE
connection interval updates"), but later got reverted due to devices
like keyboards and mice may require low connection interval.
So only validate the max value connection interval to pass the Test
Suite, and let devices to request low connection interval if needed.
[0] https://www.bluetooth.org/docman/handlers/DownloadDoc.ashx?doc_id=229869
Fixes: 68d19d7d99 ("Revert "Bluetooth: validate BLE connection interval updates"")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
LIMITED_DISCOVERABLE flag is not reset from Class of Device and
advertisement on limited discoverable timeout. This prevents to pass PTS
test GAP/DISC/LIMM/BV-02-C
Calling set_discoverable_sync as when the limited discovery is set
correctly update the Class of Device and advertisement.
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_store_wake_reason() wrongly parses event HCI_Connection_Request
as HCI_Connection_Complete and HCI_Connection_Complete as
HCI_Connection_Request, so causes recording wakeup BD_ADDR error and
potential stability issue, fix it by using the correct field.
Fixes: 2f20216c1d ("Bluetooth: Emit controller suspend and resume events")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
During our fuzz testing of the connection and disconnection process at the
RFCOMM layer, we discovered this bug. By comparing the packets from a
normal connection and disconnection process with the testcase that
triggered a KASAN report. We analyzed the cause of this bug as follows:
1. In the packets captured during a normal connection, the host sends a
`Read Encryption Key Size` type of `HCI_CMD` packet
(Command Opcode: 0x1408) to the controller to inquire the length of
encryption key.After receiving this packet, the controller immediately
replies with a Command Completepacket (Event Code: 0x0e) to return the
Encryption Key Size.
2. In our fuzz test case, the timing of the controller's response to this
packet was delayed to an unexpected point: after the RFCOMM and L2CAP
layers had disconnected but before the HCI layer had disconnected.
3. After receiving the Encryption Key Size Response at the time described
in point 2, the host still called the rfcomm_check_security function.
However, by this time `struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;`
had already been released, and when the function executed
`return hci_conn_security(conn->hcon, d->sec_level, auth_type, d->out);`,
specifically when accessing `conn->hcon`, a null-ptr-deref error occurred.
To fix this bug, check if `sk->sk_state` is BT_CLOSED before calling
rfcomm_recv_frame in rfcomm_process_rx.
Signed-off-by: Yuxuan Hu <20373622@buaa.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
During suspend, only wakeable devices can be in acceptlist, so if the
device was previously added it needs to be removed otherwise the device
can end up waking up the system prematurely.
Fixes: 3b42055388 ("Bluetooth: hci_sync: Fix attempting to suspend with unfiltered passive scan")
Signed-off-by: Clancy Shang <clancy.shang@quectel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
While handling the HCI_EV_HARDWARE_ERROR event, if the underlying
BT controller is not responding, the GPIO reset mechanism would
free the hci_dev and lead to a use-after-free in hci_error_reset.
Here's the call trace observed on a ChromeOS device with Intel AX201:
queue_work_on+0x3e/0x6c
__hci_cmd_sync_sk+0x2ee/0x4c0 [bluetooth <HASH:3b4a6>]
? init_wait_entry+0x31/0x31
__hci_cmd_sync+0x16/0x20 [bluetooth <HASH:3b4a 6>]
hci_error_reset+0x4f/0xa4 [bluetooth <HASH:3b4a 6>]
process_one_work+0x1d8/0x33f
worker_thread+0x21b/0x373
kthread+0x13a/0x152
? pr_cont_work+0x54/0x54
? kthread_blkcg+0x31/0x31
ret_from_fork+0x1f/0x30
This patch holds the reference count on the hci_dev while processing
a HCI_EV_HARDWARE_ERROR event to avoid potential crash.
Fixes: c7741d16a5 ("Bluetooth: Perform a power cycle when receiving hardware error event")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There's a very confusing mistake in the code starting a HCI inquiry: We're
calling hci_dev_test_flag() to test for HCI_INQUIRY, but hci_dev_test_flag()
checks hdev->dev_flags instead of hdev->flags. HCI_INQUIRY is a bit that's
set on hdev->flags, not on hdev->dev_flags though.
HCI_INQUIRY equals the integer 7, and in hdev->dev_flags, 7 means
HCI_BONDABLE, so we were actually checking for HCI_BONDABLE here.
The mistake is only present in the synchronous code for starting an inquiry,
not in the async one. Also devices are typically bondable while doing an
inquiry, so that might be the reason why nobody noticed it so far.
Fixes: abfeea476c ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
All MAC drivers have been converted to use the link mode members of
keee. So remove the _u32 values, and the code in the ethtool core to
convert the legacy _u32 values to link modes.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The input parameter 'level' in rawv6_get/seticmpfilter is not used.
Therefore, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Correct type in the hsr_forward_do() comment.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we're processing an IOAM Pre-allocated Trace Option-Type (the only
one supported currently), then send the trace as an ioam6 event to the
netlink multicast group. This way, user space apps will be able to
collect IOAM data.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a multicast group to the ioam6 generic netlink family and provide
ioam6_event() to send an ioam6 event to the multicast group.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's time to let it work right now. We've already prepared for this:)
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update three callers including both ipv4 and ipv6 and let the dropreason
mechanism work in reality.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In this patch, I equipped this function with more dropreasons, but
it still doesn't work yet, which I will do later.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch does two things:
1) add two more new reasons
2) only change the return value(1) to various drop reason values
for the future use
For now, we still cannot trace those two reasons. We'll implement the full
function in the subsequent patch in this series.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like what I did to ipv4 mode, refine this part: adding more drop
reasons for better tracing.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like previous patch does, only moving skb drop logical code to
cookie_v6_check() for later refinement.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now it's time to use the prepared definitions to refine this part.
Four reasons used might enough for now, I think.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only move the skb drop from tcp_v4_do_rcv() to cookie_v4_check() itself,
no other changes made. It can help us refine the specific drop reasons
later.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds /proc/sys/net/core/mem_pcpu_rsv sysctl file,
to make SK_MEMORY_PCPU_RESERV tunable.
Commit 3cd3399dd7 ("net: implement per-cpu reserves for
memory_allocated") introduced per-cpu forward alloc cache:
"Implement a per-cpu cache of +1/-1 MB, to reduce number
of changes to sk->sk_prot->memory_allocated, which
would otherwise be cause of false sharing."
sk_prot->memory_allocated points to global atomic variable:
atomic_long_t tcp_memory_allocated ____cacheline_aligned_in_smp;
If increasing the per-cpu cache size from 1MB to e.g. 16MB,
changes to sk->sk_prot->memory_allocated can be further reduced.
Performance may be improved on system with many cores.
Signed-off-by: Adam Li <adamli@os.amperecomputing.com>
Reviewed-by: Christoph Lameter (Ampere) <cl@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Few remaining fixes, hopefully the last wireless pull request to v6.8. Two
fixes to the stack and two to iwlwifi but no high priority fixes this
time.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmXd6e8RHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvZ1Qf9HVcuUzZoWabHq7AlgW1cSM1Qre0vTXIx
kuBypruFuStvHaTQ/YR5tFA/lLdbyvS9LfpX3LbiW0W+EgL7I+1eB2h2y6To+jgZ
IsbTCf+sHzkBT+EYPJnzTOv86YfN+sbGDKrQsOfAqIop9H9taF8VxVuUZofDgbEB
S/uV88e6B1Ot0mpaUNWO3w5/Xv+YBNtUBgPawRUU4IIpGEhluePkRMm3RSVi2wjm
2mxNJHjsI7OLkKivCm1PYMfC177p47/2fMAKMDkOqkhc8//svrOzcyoh0vNBea/a
7OO5GX39lcVgOy97uj7mvNL0qvFAK8396gTi8k1heOmkGhI0mlcKow==
=/obR
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.8-rc7
Few remaining fixes, hopefully the last wireless pull request to v6.8.
Two fixes to the stack and two to iwlwifi but no high priority fixes
this time.
* tag 'wireless-2024-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: only call drv_sta_rc_update for uploaded stations
MAINTAINERS: wifi: Add N: ath1*k entries to match .yaml files
MAINTAINERS: wifi: update Jeff Johnson e-mail address
wifi: iwlwifi: mvm: fix the TXF mapping for BZ devices
wifi: iwlwifi: mvm: ensure offloading TID queue exists
wifi: nl80211: reject iftype change with mesh ID change
====================
Link: https://lore.kernel.org/r/20240227135751.C5EC6C43390@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The input parameter 'opt' in rawv6_err() is not used. Therefore, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240224084121.2479603-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a followup of commit 234ec0b603 ("netlink: fix potential
sleeping issue in mqueue_flush_file"), because vfree_atomic()
overhead is unfortunate for medium sized allocations.
1) If the allocation is smaller than PAGE_SIZE, do not bother
with vmalloc() at all. Some arches have 64KB PAGE_SIZE,
while NLMSG_GOODSIZE is smaller than 8KB.
2) Use kvmalloc(), which might allocate one high order page
instead of vmalloc if memory is not too fragmented.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20240224090630.605917-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the xfrm driver and leverage the network
core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Fuzzers and static checkers might not detect when mptcp_sk() is used
with a non mptcp_sock structure.
This is similar to the parent commit, where it is easy to use mptcp_sk()
with a TCP sock, e.g. with a subflow sk.
So a new simple check is done when CONFIG_DEBUG_NET is enabled to tell
kernel devs when a non-MPTCP socket is being used as an MPTCP one.
'mptcp_sk()' macro is then defined differently: with an extra WARN to
complain when an unexpected socket is being used.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-4-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fuzzers and static checkers might not detect when tcp_sk() is used with
a non tcp_sock structure.
This kind of mistake already happened a few times with MPTCP: when
wrongly using TCP-specific helpers with mptcp_sock pointers. On the
other hand, there are many 'tcp_xxx()' helpers that are taking a 'struct
sock' pointer as arguments, and some of them are only looking at fields
from 'struct sock', and nothing from 'struct tcp_sock'. It is then
tempting to use them with a 'struct mptcp_sock'.
So a new simple check is done when CONFIG_DEBUG_NET is enabled to tell
kernel devs when a non-TCP socket is being used as a TCP one. 'tcp_sk()'
macro is then re-defined to add a WARN when an unexpected socket is
being used.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-3-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As it would be done when initiating an MPTCP sock.
This is not strictly needed for this test, but it will be when a later
patch will check if the right protocol is being used when calling
mptcp_sk().
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-2-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
when MPTCP server accepts an incoming connection, it clones its listener
socket. However, the pointer to 'inet_opt' for the new socket has the same
value as the original one: as a consequence, on program exit it's possible
to observe the following splat:
BUG: KASAN: double-free in inet_sock_destruct+0x54f/0x8b0
Free of addr ffff888485950880 by task swapper/25/0
CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Not tainted 6.8.0-rc1+ #609
Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0 07/26/2013
Call Trace:
<IRQ>
dump_stack_lvl+0x32/0x50
print_report+0xca/0x620
kasan_report_invalid_free+0x64/0x90
__kasan_slab_free+0x1aa/0x1f0
kfree+0xed/0x2e0
inet_sock_destruct+0x54f/0x8b0
__sk_destruct+0x48/0x5b0
rcu_do_batch+0x34e/0xd90
rcu_core+0x559/0xac0
__do_softirq+0x183/0x5a4
irq_exit_rcu+0x12d/0x170
sysvec_apic_timer_interrupt+0x6b/0x80
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x16/0x20
RIP: 0010:cpuidle_enter_state+0x175/0x300
Code: 30 00 0f 84 1f 01 00 00 83 e8 01 83 f8 ff 75 e5 48 83 c4 18 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc fb 45 85 ed <0f> 89 60 ff ff ff 48 c1 e5 06 48 c7 43 18 00 00 00 00 48 83 44 2b
RSP: 0018:ffff888481cf7d90 EFLAGS: 00000202
RAX: 0000000000000000 RBX: ffff88887facddc8 RCX: 0000000000000000
RDX: 1ffff1110ff588b1 RSI: 0000000000000019 RDI: ffff88887fac4588
RBP: 0000000000000004 R08: 0000000000000002 R09: 0000000000043080
R10: 0009b02ea273363f R11: ffff88887fabf42b R12: ffffffff932592e0
R13: 0000000000000004 R14: 0000000000000000 R15: 00000022c880ec80
cpuidle_enter+0x4a/0xa0
do_idle+0x310/0x410
cpu_startup_entry+0x51/0x60
start_secondary+0x211/0x270
secondary_startup_64_no_verify+0x184/0x18b
</TASK>
Allocated by task 6853:
kasan_save_stack+0x1c/0x40
kasan_save_track+0x10/0x30
__kasan_kmalloc+0xa6/0xb0
__kmalloc+0x1eb/0x450
cipso_v4_sock_setattr+0x96/0x360
netlbl_sock_setattr+0x132/0x1f0
selinux_netlbl_socket_post_create+0x6c/0x110
selinux_socket_post_create+0x37b/0x7f0
security_socket_post_create+0x63/0xb0
__sock_create+0x305/0x450
__sys_socket_create.part.23+0xbd/0x130
__sys_socket+0x37/0xb0
__x64_sys_socket+0x6f/0xb0
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Freed by task 6858:
kasan_save_stack+0x1c/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x12c/0x1f0
kfree+0xed/0x2e0
inet_sock_destruct+0x54f/0x8b0
__sk_destruct+0x48/0x5b0
subflow_ulp_release+0x1f0/0x250
tcp_cleanup_ulp+0x6e/0x110
tcp_v4_destroy_sock+0x5a/0x3a0
inet_csk_destroy_sock+0x135/0x390
tcp_fin+0x416/0x5c0
tcp_data_queue+0x1bc8/0x4310
tcp_rcv_state_process+0x15a3/0x47b0
tcp_v4_do_rcv+0x2c1/0x990
tcp_v4_rcv+0x41fb/0x5ed0
ip_protocol_deliver_rcu+0x6d/0x9f0
ip_local_deliver_finish+0x278/0x360
ip_local_deliver+0x182/0x2c0
ip_rcv+0xb5/0x1c0
__netif_receive_skb_one_core+0x16e/0x1b0
process_backlog+0x1e3/0x650
__napi_poll+0xa6/0x500
net_rx_action+0x740/0xbb0
__do_softirq+0x183/0x5a4
The buggy address belongs to the object at ffff888485950880
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes inside of
64-byte region [ffff888485950880, ffff8884859508c0)
The buggy address belongs to the physical page:
page:0000000056d1e95e refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888485950700 pfn:0x485950
flags: 0x57ffffc0000800(slab|node=1|zone=2|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 0057ffffc0000800 ffff88810004c640 ffffea00121b8ac0 dead000000000006
raw: ffff888485950700 0000000000200019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888485950780: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff888485950800: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888485950880: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^
ffff888485950900: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff888485950980: 00 00 00 00 00 01 fc fc fc fc fc fc fc fc fc fc
Something similar (a refcount underflow) happens with CALIPSO/IPv6. Fix
this by duplicating IP / IPv6 options after clone, so that
ip{,6}_sock_destruct() doesn't end up freeing the same memory area twice.
Fixes: cf7da0d66c ("mptcp: Create SUBFLOW socket for incoming connections")
Cc: stable@vger.kernel.org
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-8-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the blamed commit below, the send buffer auto-tuning can
happen after that the mptcp_propagate_sndbuf() completes - via
the delegated action infrastructure.
We must check for write space even after such change or we risk
missing the wake-up event.
Fixes: 8005184fd1 ("mptcp: refactor sndbuf auto-tuning")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-6-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
when inserting not contiguous data in the subflow write queue,
the protocol creates a new skb and prevent the TCP stack from
merging it later with already queued skbs by setting the EOR marker.
Still no push flag is explicitly set at the end of previous GSO
packet, making the aggregation on the receiver side sub-optimal -
and packetdrill self-tests less predictable.
Explicitly mark the end of not contiguous DSS with the push flag.
Fixes: 6d0060f600 ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-4-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the 'Fixes' commit mentioned below, the client side might print
the following warning once when a subflow is fully established at the
reception of any valid additional ack:
MPTCP: bogus mpc option on established client sk
That's a normal situation, and no warning should be printed for that. We
can then skip the check when the label is used.
Fixes: e4a0fa47e8 ("mptcp: corner case locking for rx path fields initialization")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-3-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Address family of server side mismatches with that of client side, like
in "userspace pm add & remove address" test:
userspace_pm_add_addr $ns1 10.0.2.1 10
userspace_pm_rm_sf $ns1 "::ffff:10.0.2.1" $SUB_ESTABLISHED
That's because on the server side, the family is set to AF_INET6 and the
v4 address is mapped in a v6 one.
This patch fixes this issue. In mptcp_pm_nl_subflow_destroy_doit(), before
checking local address family with remote address family, map an IPv4
address to an IPv6 address if the pair is a v4-mapped address.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-1-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct ifacaddr6 are already freed after RCU grace period.
Add __rcu qualifier to aca_next pointer, and idev->ac_list
Add relevant rcu_assign_pointer() and dereference accessors.
ipv6_chk_acast_dev() no longer needs to acquire idev->lock.
/proc/net/anycast6 is now purely RCU protected, it no
longer acquires idev->lock.
Similarly in6_dump_addrs() can use RCU protection to iterate
through anycast addresses. It was relying on a mixture of RCU
and RTNL but next patches will get rid of RTNL there.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223201054.220534-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This fixes a possible UAF in if_nlmsg_size(),
which can run without RTNL.
Add rcu protection to "struct dpll_pin"
Move netdev_dpll_pin() from netdevice.h to dpll.h to
decrease name pollution.
Note: This looks possible to no longer acquire RTNL in
netdev_dpll_pin_assign() later in net-next.
v2: do not force rcu_read_lock() in rtnl_dpll_pin_size() (Jiri Pirko)
Fixes: 5f18426928 ("netdev: expose DPLL pin handle for netdevice")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223123208.3543319-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It seems that if userspace provides a correct IFA_TARGET_NETNSID value
but no IFA_ADDRESS and IFA_LOCAL attributes, inet6_rtm_getaddr()
returns -EINVAL with an elevated "struct net" refcount.
Fixes: 6ecf4c37eb ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to be able to run rtnl_fill_ifinfo() under RCU protection
instead of RTNL in the future.
dev->name_node items are already rcu protected.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use READ_ONCE() to read the following device fields:
dev->mem_start
dev->mem_end
dev->base_addr
dev->irq
dev->dma
dev->if_port
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No longer hold RTNL while calling inet_dump_fib().
Also change return value for a completed dump:
Returning 0 instead of skb->len allows NLMSG_DONE
to be appended to the skb. User space does not have
to call us again to get a standalone NLMSG_DONE marker.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new field into struct fib_dump_filter, to let callers
tell if they use RTNL locking or RCU.
This is used in the following patch, when inet_dump_fib()
no longer holds RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No longer hold RTNL while calling inet6_dump_ifinfo()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to RTNL_FLAG_DOIT_UNLOCKED, this new flag
allows dump operations registered via rtnl_register()
or rtnl_register_module() to opt-out from RTNL protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit af65bdfce9 ("[NETLINK]: Switch cb_lock spinlock
to mutex and allow to override it"), Patrick McHardy used
a common mutex to protect both nlk->cb and the dump() operations.
The override is used for rtnl dumps, registered with
rntl_register() and rntl_register_module().
We want to be able to opt-out some dump() operations
to not acquire RTNL, so we need to protect nlk->cb
with a per socket mutex.
This patch renames nlk->cb_def_mutex to nlk->nl_cb_mutex
The optional pointer to the mutex used to protect dump()
call is stored in nlk->dump_cb_mutex
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__netlink_dump_start() releases nlk->cb_mutex right before
calling netlink_dump() which grabs it again.
This seems dangerous, even if KASAN did not bother yet.
Add a @lock_taken parameter to netlink_dump() to let it
grab the mutex if called from netlink_recvmsg() only.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__netlink_diag_dump() returns 1 if the dump is not complete,
zero if no error occurred.
If err variable is zero, this means the dump is complete:
We should not return skb->len in this case, but 0.
This allows NLMSG_DONE to be appended to the skb.
User space does not have to call us again only to get NLMSG_DONE.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare inet6_dump_ifinfo() to run with RCU protection
instead of RTNL and use for_each_netdev_dump() interface.
Also properly return 0 at the end of a dump, avoiding
an extra recvmsg() system call and RTNL acquisition.
Note that RTNL-less dumps need core changes, coming later
in the series.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to use RCU protection instead of RTNL
for inet6_fill_ifinfo().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to no longer hold RTNL while calling inet6_fill_ifla6_attrs()
in the future. Add needed READ_ONCE()/WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to be able to run rtnl_fill_ifinfo() under RCU protection
instead of RTNL in the future.
This patch prepares dev_get_iflink() and nla_put_iflink()
to run either with RTNL or RCU held.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After a couple recent changes in LLVM, there is a warning (or error with
CONFIG_WERROR=y or W=e) from the compile time fortify source routines,
specifically the memset() in copy_to_user_tmpl().
In file included from net/xfrm/xfrm_user.c:14:
...
include/linux/fortify-string.h:438:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
438 | __write_overflow_field(p_size_field, size);
| ^
1 error generated.
While ->xfrm_nr has been validated against XFRM_MAX_DEPTH when its value
is first assigned in copy_templates() by calling validate_tmpl() first
(so there should not be any issue in practice), LLVM/clang cannot really
deduce that across the boundaries of these functions. Without that
knowledge, it cannot assume that the loop stops before i is greater than
XFRM_MAX_DEPTH, which would indeed result a stack buffer overflow in the
memset().
To make the bounds of ->xfrm_nr clear to the compiler and add additional
defense in case copy_to_user_tmpl() is ever used in a path where
->xfrm_nr has not been properly validated against XFRM_MAX_DEPTH first,
add an explicit bound check and early return, which clears up the
warning.
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1985
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
mpls_gso_segment() assumes skb_inner_network_header() returns
a valid result:
mpls_hlen = skb_inner_network_header(skb) - skb_network_header(skb);
if (unlikely(!mpls_hlen || mpls_hlen % MPLS_HLEN))
goto out;
if (unlikely(!pskb_may_pull(skb, mpls_hlen)))
With syzbot reproducer, skb_inner_network_header() yields 0,
skb_network_header() returns 108, so this will
"pskb_may_pull(skb, -108)))" which triggers a newly added
DEBUG_NET_WARN_ON_ONCE() check:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5068 at include/linux/skbuff.h:2723 pskb_may_pull_reason include/linux/skbuff.h:2723 [inline]
WARNING: CPU: 0 PID: 5068 at include/linux/skbuff.h:2723 pskb_may_pull include/linux/skbuff.h:2739 [inline]
WARNING: CPU: 0 PID: 5068 at include/linux/skbuff.h:2723 mpls_gso_segment+0x773/0xaa0 net/mpls/mpls_gso.c:34
[..]
skb_mac_gso_segment+0x383/0x740 net/core/gso.c:53
nsh_gso_segment+0x40a/0xad0 net/nsh/nsh.c:108
skb_mac_gso_segment+0x383/0x740 net/core/gso.c:53
__skb_gso_segment+0x324/0x4c0 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
[..]
sch_direct_xmit+0x11a/0x5f0 net/sched/sch_generic.c:327
[..]
packet_sendmsg+0x46a9/0x6130 net/packet/af_packet.c:3113
[..]
First iteration of this patch made mpls_hlen signed and changed
test to error out to "mpls_hlen <= 0 || ..".
Eric Dumazet said:
> I was thinking about adding a debug check in skb_inner_network_header()
> if inner_network_header is zero (that would mean it is not 'set' yet),
> but this would trigger even after your patch.
So add new skb_inner_network_header_was_set() helper and use that.
The syzbot reproducer injects data via packet socket. The skb that gets
allocated and passed down the stack has ->protocol set to NSH (0x894f)
and gso_type set to SKB_GSO_UDP | SKB_GSO_DODGY.
This gets passed to skb_mac_gso_segment(), which sees NSH as ptype to
find a callback for. nsh_gso_segment() retrieves next type:
proto = tun_p_to_eth_p(nsh_hdr(skb)->np);
... which is MPLS (TUN_P_MPLS_UC). It updates skb->protocol and then
calls mpls_gso_segment(). Inner offsets are all 0, so mpls_gso_segment()
ends up with a negative header size.
In case more callers rely on silent handling of such large may_pull values
we could also 'legalize' this behaviour, either replacing the debug check
with (len > INT_MAX) test or removing it and instead adding a comment
before existing
if (unlikely(len > skb->len))
return SKB_DROP_REASON_PKT_TOO_SMALL;
test in pskb_may_pull_reason(), saying that this check also implicitly
takes care of callers that miscompute header sizes.
Cc: Simon Horman <horms@kernel.org>
Fixes: 219eee9c0d ("net: skbuff: add overflow debug check to pull/push helpers")
Reported-by: syzbot+99d15fcdb0132a1e1a82@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/00000000000043b1310611e388aa@google.com/raw
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240222140321.14080-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when you switch between branches or something like that and
rebuild, net/ethtool/ioctl.c has to be built again because it depends
on UTS_RELEASE.
By instead referencing a string variable stored in another object file,
this can be avoided.
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240220194244.2056384-1-jannh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a station has not been uploaded yet, receiving SMPS or channel width
notification action frames can lead to rate_control_rate_update calling
drv_sta_rc_update with uninitialized driver private data.
Fix this by adding a missing check for sta->uploaded.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://msgid.link/20240221140535.16102-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, mctp_local_output only takes ownership of skb on success, and
we may leak an skb if mctp_local_output fails in specific states; the
skb ownership isn't transferred until the actual output routing occurs.
Instead, make mctp_local_output free the skb on all error paths up to
the route action, so it always consumes the passed skb.
Fixes: 833ef3b91d ("mctp: Populate socket implementation")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220081053.1439104-1-jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzkaller triggered following kasan splat:
BUG: KASAN: use-after-free in __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170
Read of size 1 at addr ffff88812fb4000e by task syz-executor183/5191
[..]
kasan_report+0xda/0x110 mm/kasan/report.c:588
__skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170
skb_flow_dissect_flow_keys include/linux/skbuff.h:1514 [inline]
___skb_get_hash net/core/flow_dissector.c:1791 [inline]
__skb_get_hash+0xc7/0x540 net/core/flow_dissector.c:1856
skb_get_hash include/linux/skbuff.h:1556 [inline]
ip_tunnel_xmit+0x1855/0x33c0 net/ipv4/ip_tunnel.c:748
ipip_tunnel_xmit+0x3cc/0x4e0 net/ipv4/ipip.c:308
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564
__dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4349
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
neigh_connected_output+0x42c/0x5d0 net/core/neighbour.c:1592
...
ip_finish_output2+0x833/0x2550 net/ipv4/ip_output.c:235
ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323
..
iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1dbc/0x33c0 net/ipv4/ip_tunnel.c:831
ipgre_xmit+0x4a1/0x980 net/ipv4/ip_gre.c:665
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564
...
The splat occurs because skb->data points past skb->head allocated area.
This is because neigh layer does:
__skb_pull(skb, skb_network_offset(skb));
... but skb_network_offset() returns a negative offset and __skb_pull()
arg is unsigned. IOW, we skb->data gets "adjusted" by a huge value.
The negative value is returned because skb->head and skb->data distance is
more than 64k and skb->network_header (u16) has wrapped around.
The bug is in the ip_tunnel infrastructure, which can cause
dev->needed_headroom to increment ad infinitum.
The syzkaller reproducer consists of packets getting routed via a gre
tunnel, and route of gre encapsulated packets pointing at another (ipip)
tunnel. The ipip encapsulation finds gre0 as next output device.
This results in the following pattern:
1). First packet is to be sent out via gre0.
Route lookup found an output device, ipip0.
2).
ip_tunnel_xmit for gre0 bumps gre0->needed_headroom based on the future
output device, rt.dev->needed_headroom (ipip0).
3).
ip output / start_xmit moves skb on to ipip0. which runs the same
code path again (xmit recursion).
4).
Routing step for the post-gre0-encap packet finds gre0 as output device
to use for ipip0 encapsulated packet.
tunl0->needed_headroom is then incremented based on the (already bumped)
gre0 device headroom.
This repeats for every future packet:
gre0->needed_headroom gets inflated because previous packets' ipip0 step
incremented rt->dev (gre0) headroom, and ipip0 incremented because gre0
needed_headroom was increased.
For each subsequent packet, gre/ipip0->needed_headroom grows until
post-expand-head reallocations result in a skb->head/data distance of
more than 64k.
Once that happens, skb->network_header (u16) wraps around when
pskb_expand_head tries to make sure that skb_network_offset() is unchanged
after the headroom expansion/reallocation.
After this skb_network_offset(skb) returns a different (and negative)
result post headroom expansion.
The next trip to neigh layer (or anything else that would __skb_pull the
network header) makes skb->data point to a memory location outside
skb->head area.
v2: Cap the needed_headroom update to an arbitarily chosen upperlimit to
prevent perpetual increase instead of dropping the headroom increment
completely.
Reported-and-tested-by: syzbot+bfde3bef047a81b8fde6@syzkaller.appspotmail.com
Closes: https://groups.google.com/g/syzkaller-bugs/c/fL9G6GtWskY/m/VKk_PR5FBAAJ
Fixes: 243aad830e ("ip_gre: include route header_len in max_headroom calculation")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220135606.4939-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GYgG
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-02-21' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter updates for net-next
1. Prefer KMEM_CACHE() macro to create kmem caches, from Kunwu Chan.
Patches 2 and 3 consolidate nf_log NULL checks and introduces
extra boundary checks on family and type to make it clear that no out
of bounds access will happen. No in-tree user currently passes such
values, but thats not clear from looking at the function.
From Pablo Neira Ayuso.
Patch 4, also from Pablo, gets rid of unneeded conditional in
nft_osf init function.
Patch 5, from myself, fixes erroneous Kconfig dependencies that
came in an earlier net-next pull request. This should get rid
of the xtables related build failure reports.
Patches 6 to 10 are an update to nftables' concatenated-ranges
set type to speed up element insertions. This series also
compacts a few data structures and cleans up a few oddities such
as reliance on ZERO_SIZE_PTR when asking to allocate a set with
no elements. From myself.
Patches 11 moves the nf_reinject function from the netfilter core
(vmlinux) into the nfnetlink_queue backend, the only location where
this is called from. Also from myself.
Patch 12, from Kees Cook, switches xtables' compat layer to use
unsafe_memcpy because xt_entry_target cannot easily get converted
to a real flexible array (its UAPI and used inside other structs).
* tag 'nf-next-24-02-21' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: x_tables: Use unsafe_memcpy() for 0-sized destination
netfilter: move nf_reinject into nfnetlink_queue modules
netfilter: nft_set_pipapo: use GFP_KERNEL for insertions
netfilter: nft_set_pipapo: speed up bulk element insertions
netfilter: nft_set_pipapo: shrink data structures
netfilter: nft_set_pipapo: do not rely on ZERO_SIZE_PTR
netfilter: nft_set_pipapo: constify lookup fn args where possible
netfilter: xtables: fix up kconfig dependencies
netfilter: nft_osf: simplify init path
netfilter: nf_log: validate nf_logger_find_get()
netfilter: nf_log: consolidate check for NULL logger in lookup function
netfilter: expect: Simplify the allocation of slab caches in nf_conntrack_expect_init
====================
Link: https://lore.kernel.org/r/20240221112637.5396-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the ipv6/sit driver and leverage the network
core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240221161732.3026127-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240215080500.2616848-1-agordeev@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The third "new features" pull request for v6.9. This is a quick
followup to send commit 04edb5dc68 ("wifi: ath12k: Fix uninitialized
use of ret in ath12k_mac_allocate()") to fix the ath12k clang warning
introduced in the previous pull request.
We also have support for QCA2066 in ath11k, several new features in
ath12k and few other changes in drivers. In stack it's mostly cleanup
and refactoring.
Major changes:
ath12k
* firmware-2.bin support
* support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
* QCN9274: support split-PHY devices
* WCN7850: enable Power Save Mode in station mode
* WCN7850: P2P support
ath11k:
* QCA6390 & WCN6855: support 2 concurrent station interfaces
* QCA2066 support
iwlwifi
* mvm: support wider-bandwidth OFDMA
* bump firmware API to 90 for BZ/SC devices
brcmfmac
* DMI nvram filename quirk for ACEPC W5 Pro
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmXXJpARHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZu2Twf/QZ5FVecvOu/qNQyUeaclXjNuFw0+cJpz
luVzxG54wh484L1dRAmsztwHPA78rLMcExZi2Zb9PszVv4V9mD6rHoV0ws/o86Gr
QTq+8To9sr9wJfooVRO1ifgfoiafxX2TYJ9yGR3XwkCDf5ROq9JLBOQWW8p0bO/M
UyWoMvSf/WBAjOHUfCQzPCVPQhyld7JL/V7LGMZGmdy3cPkWPVXmRMyHL9f3+vdq
O5/HxZBP4Dg3zEsUiOADmD/l+8wuf/Tebqt7uRJ4/sAHsmlEPzoZPsuNxy6FljYX
5fuZVpzmjGzdGV+YHidpbZl/9Shq/Bc7Cf7eTQZ70P9cL1kbZ7usIA==
=mcyY
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The third "new features" pull request for v6.9. This is a quick
followup to send commit 04edb5dc68 ("wifi: ath12k: Fix uninitialized
use of ret in ath12k_mac_allocate()") to fix the ath12k clang warning
introduced in the previous pull request.
We also have support for QCA2066 in ath11k, several new features in
ath12k and few other changes in drivers. In stack it's mostly cleanup
and refactoring.
Major changes:
ath12k
* firmware-2.bin support
* support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
* QCN9274: support split-PHY devices
* WCN7850: enable Power Save Mode in station mode
* WCN7850: P2P support
ath11k:
* QCA6390 & WCN6855: support 2 concurrent station interfaces
* QCA2066 support
iwlwifi
* mvm: support wider-bandwidth OFDMA
* bump firmware API to 90 for BZ/SC devices
brcmfmac
* DMI nvram filename quirk for ACEPC W5 Pro
* tag 'wireless-next-2024-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (75 commits)
wifi: wilc1000: revert reset line logic flip
wifi: brcmfmac: Add DMI nvram filename quirk for ACEPC W5 Pro
wifi: rtlwifi: set initial values for unexpected cases of USB endpoint priority
wifi: rtl8xxxu: check vif before using in rtl8xxxu_tx()
wifi: rtlwifi: rtl8192cu: Fix TX aggregation
wifi: wilc1000: remove AKM suite be32 conversion for external auth request
wifi: nl80211: refactor parsing CSA offsets
wifi: nl80211: force WLAN_AKM_SUITE_SAE in big endian in NL80211_CMD_EXTERNAL_AUTH
wifi: iwlwifi: load b0 version of ucode for HR1/HR2
wifi: iwlwifi: handle per-phy statistics from fw
wifi: iwlwifi: iwl-fh.h: fix kernel-doc issues
wifi: iwlwifi: api: fix kernel-doc reference
wifi: iwlwifi: mvm: unlock mvm if there is no primary link
wifi: iwlwifi: bump FW API to 90 for BZ/SC devices
wifi: iwlwifi: mvm: support PHY context version 6
wifi: iwlwifi: mvm: partially support PHY context version 6
wifi: iwlwifi: mvm: support wider-bandwidth OFDMA
wifi: cfg80211: use ML element parsing helpers
wifi: mac80211: align ieee80211_mle_get_bss_param_ch_cnt()
wifi: cfg80211: refactor RNR parsing
...
====================
Link: https://lore.kernel.org/r/20240222105205.CEC54C433F1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ensure we have the correct key parameters on sending a message.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When CONFIG_MCTP_FLOWS is enabled, outgoing skbs should have their
SKB_EXT_MCTP extension set for drivers to consume.
Add two tests for local-to-output routing that check for the flow
extensions: one for the simple single-packet case, and one for
fragmentation.
We now make MCTP_TEST select MCTP_FLOWS, so we always get coverage of
these flow tests. The tests are skippable if MCTP_FLOWS is (otherwise)
disabled, but that would need manual config tweaking.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If we're fragmenting on local output, the original packet may contain
ext data for the MCTP flows. We'll want this in the resulting fragment
skbs too.
So, do a skb_ext_copy() in the fragmentation path, and implement the
MCTP-specific parts of an ext copy operation.
Fixes: 67737c4572 ("mctp: Pass flow data & flow release events to drivers")
Reported-by: Jian Zhang <zhangjian.3032@bytedance.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a couple of tests that excersise the new net-specific sk_key and
bind lookups
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We'll want to create net-specific test setups in an upcoming change, so
allow the caller to provide a non-default netid.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we have net-specific tags, extend the tag allocation ioctls
(SIOCMCTPALLOCTAG / SIOCMCTPDROPTAG) to allow a network parameter to be
passed to the tag allocation.
We also add a local_addr member to the ioc struct, to allow for a future
finer-grained tag allocation using local EIDs too. We don't add any
specific support for that now though, so require MCTP_ADDR_ANY or
MCTP_ADDR_NULL for those at present.
The old ioctls will still work, but allocate for the default MCTP net.
These are now marked as deprecated in the header.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, we lookup sk_keys from the entire struct net_namespace, which
may contain multiple MCTP net IDs. In those cases we want to distinguish
between endpoints with the same EID but different net ID.
Add the net ID data to the struct mctp_sk_key, populate on add and
filter on this during route lookup.
For the ioctl interface, we use a default net of
MCTP_INITIAL_DEFAULT_NET (ie., what will be in use for single-net
configurations), but we'll extend the ioctl interface to provide
net-specific tag allocation in an upcoming change.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In our test skb creation functions, we're not setting up the net and
device data. This doesn't matter at the moment, but we will want to add
support for distinct net IDs in future.
Set the ->net identifier on the test MCTP device, and ensure that test
skbs are set up with the correct device-related data on creation. Create
a helper for setting skb->dev and mctp_skb_cb->net.
We have a few cases where we're calling __mctp_cb() to initialise the cb
(which we need for the above) separately, so integrate this into the skb
creation helpers.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We may have an ANY address in either the local or peer address of a
sk_key, and may want to match on an incoming daddr or saddr being ANY.
Do this by altering the conflicting-tag lookup to also accept ANY as
the local/peer address.
We don't want mctp_address_matches to match on the requested EID being
ANY, as that is a specific lookup case on packet input.
Reported-by: Eric Chuang <echuang@google.com>
Reported-by: Anthony <anthonyhkf@google.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We could do with a little more comment on where MCTP_ADDR_ANY will match
in the key allocations.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We have a double-swap of local and peer addresses in
mctp_alloc_local_tag; the arguments in both call sites are swapped, but
there is also a swap in the implementation of alloc_local_tag. This is
opaque because we're using source/dest address references, which don't
match the local/peer semantics.
Avoid this confusion by naming the arguments as 'local' and 'peer', and
remove the double swap. The calling order now matches mctp_key_alloc.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
l2tp_ip6_sendmsg needs to avoid accounting for the transport header
twice when splicing more data into an already partially-occupied skbuff.
To manage this, we check whether the skbuff contains data using
skb_queue_empty when deciding how much data to append using
ip6_append_data.
However, the code which performed the calculation was incorrect:
ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;
...due to C operator precedence, this ends up setting ulen to
transhdrlen for messages with a non-zero length, which results in
corrupted packets on the wire.
Add parentheses to correct the calculation in line with the original
intent.
Fixes: 9d4c75800f ("ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()")
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220122156.43131-1-tparkin@katalix.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=iPIR
-----END PGP SIGNATURE-----
Merge tag 'nf-24-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) If user requests to wake up a table and hook fails, restore the
dormant flag from the error path, from Florian Westphal.
2) Reset dst after transferring it to the flow object, otherwise dst
gets released twice from the error path.
3) Release dst in case the flowtable selects a direct xmit path, eg.
transmission to bridge port. Otherwise, dst is memleaked.
4) Register basechain and flowtable hooks at the end of the command.
Error path releases these datastructure without waiting for the
rcu grace period.
5) Use kzalloc() to initialize struct nft_hook to fix a KMSAN report
on access to hook type, also from Florian Westphal.
netfilter pull request 24-02-22
* tag 'nf-24-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: use kzalloc for hook allocation
netfilter: nf_tables: register hooks last when adding new chain/flowtable
netfilter: nft_flow_offload: release dst in case direct xmit path is used
netfilter: nft_flow_offload: reset dst in route object after setting up flow
netfilter: nf_tables: set dormant flag on hook register failure
====================
Link: https://lore.kernel.org/r/20240222000843.146665-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZdaBCwAKCRDbK58LschI
g3EhAP0d+S18mNabiEGz8efnE2yz3XcFchJgjiRS8WjOv75GvQEA6/sWncFjbc8k
EqxPHmeJa19rWhQlFrmlyNQfLYGe4gY=
=VkOs
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-02-22
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 24 day(s) which contain
a total of 15 files changed, 217 insertions(+), 17 deletions(-).
The main changes are:
1) Fix a syzkaller-triggered oops when attempting to read the vsyscall
page through bpf_probe_read_kernel and friends, from Hou Tao.
2) Fix a kernel panic due to uninitialized iter position pointer in
bpf_iter_task, from Yafang Shao.
3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel,
from Martin KaFai Lau.
4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET)
due to incorrect truesize accounting, from Sebastian Andrzej Siewior.
5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready,
from Shigeru Yoshida.
6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be
resolved, from Hari Bathini.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
selftests/bpf: Add negtive test cases for task iter
bpf: Fix an issue due to uninitialized bpf_iter_task
selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel
bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
selftest/bpf: Test the read of vsyscall page under x86-64
x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
bpf, scripts: Correct GPL license name
xsk: Add truesize to skb_add_rx_frag().
bpf: Fix warning for bpf_cpumask in verifier
====================
Link: https://lore.kernel.org/r/20240221231826.1404-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ioam6_fill_trace_data() writes inside the skb payload without ensuring
it's writeable (e.g., not cloned). This function is called both from the
input and output path. The output path (ioam6_iptunnel) already does the
check. This commit provides a fix for the input path, inside
ipv6_hop_ioam(). It also updates ip6_parse_tlv() to refresh the network
header pointer ("nh") when returning from ipv6_hop_ioam().
Fixes: 9ee11f0fff ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The receive queues are protected by their respective spin-lock, not
the socket lock. This could lead to skb_peek() unexpectedly
returning NULL or a pointer to an already dequeued socket buffer.
Fixes: 9641458d3e ("Phonet: Pipe End Point for Phonet Pipes protocol")
Signed-off-by: Rémi Denis-Courmont <courmisch@gmail.com>
Link: https://lore.kernel.org/r/20240218081214.4806-2-remi@remlab.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The receive queue is protected by its embedded spin-lock, not the
socket lock, so we need the former lock here (and only that one).
Fixes: 107d0d9b8d ("Phonet: Phonet datagram transport protocol")
Reported-by: Luosili <rootlab@huawei.com>
Signed-off-by: Rémi Denis-Courmont <courmisch@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240218081214.4806-1-remi@remlab.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As IDR can't protect itself from the concurrent modification, place
idr_remove() under the protection of tp->lock.
Fixes: 08a0063df3 ("net/sched: flower: Move filter handle initialization earlier")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240220085928.9161-1-jianbol@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unlike other commands, due to a c&p error, port dump fills-up cmd with
wrong value, different from port-get request cmd, port-get doit reply
and port notification.
Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW.
Skimmed through devlink userspace implementations, none of them cares
about this cmd value. Only ynl, for which, this is actually a fix, as it
expects doit and dumpit ops rsp_value to be the same.
Omit the fixes tag, even thought this is fix, better to target this for
next release.
Fixes: bfcd3a4661 ("Introduce devlink infrastructure")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240220075245.75416-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We want to re-organize the struct sock layout. The sk_peek_off
field location is problematic, as most protocols want it in the
RX read area, while UDP wants it on a cacheline different from
sk_receive_queue.
Create a local (inside udp_sock) copy of the 'peek offset is enabled'
flag and place it inside the same cacheline of reader_queue.
Check such flag before reading sk_peek_off. This will save potential
false sharing and cache misses in the fast-path.
Tested under UDP flood with small packets. The struct sock layout
update causes a 4% performance drop, and this patch restores completely
the original tput.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/67ab679c15fbf49fa05b3ffe05d91c47ab84f147.1708426665.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We may hold an extra reference on a socket if a tag allocation fails: we
optimistically allocate the sk_key, and take a ref there, but do not
drop if we end up not using the allocated key.
Ensure we're dropping the sock on this failure by doing a proper unref
rather than directly kfree()ing.
Fixes: de8a6b15d9 ("net: mctp: add an explicit reference from a mctp_sk_key to sock")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/ce9b61e44d1cdae7797be0c5e3141baf582d23a0.1707983487.git.jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KMSAN reports unitialized variable when registering the hook,
reg->hook_ops_type == NF_HOOK_OP_BPF)
~~~~~~~~~~~ undefined
This is a small structure, just use kzalloc to make sure this
won't happen again when new fields get added to nf_hook_ops.
Fixes: 7b4b2fa375 ("netfilter: annotate nf_tables base hook ops")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Register hooks last when adding chain/flowtable to ensure that packets do
not walk over datastructure that is being released in the error path
without waiting for the rcu grace period.
Fixes: 91c7b38dc9 ("netfilter: nf_tables: use new transaction infrastructure to handle chain")
Fixes: 3b49e2e94e ("netfilter: nf_tables: add flow table netlink frontend")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
dst is transferred to the flow object, route object does not own it
anymore. Reset dst in route object, otherwise if flow_offload_add()
fails, error path releases dst twice, leading to a refcount underflow.
Fixes: a3c90f7a23 ("netfilter: nf_tables: flow offload expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We need to set the dormant flag again if we fail to register
the hooks.
During memory pressure hook registration can fail and we end up
with a table marked as active but no registered hooks.
On table/base chain deletion, nf_tables will attempt to unregister
the hook again which yields a warn splat from the nftables core.
Reported-and-tested-by: syzbot+de4025c006ec68ac56fc@syzkaller.appspotmail.com
Fixes: 179d9ba555 ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If we queue 3 records:
- record 1, type DATA
- record 2, some other type
- record 3, type DATA
and do a recv(PEEK), the rx_list will contain the first two records.
The next large recv will walk through the rx_list and copy data from
record 1, then stop because record 2 is a different type. Since we
haven't filled up our buffer, we will process the next available
record. It's also DATA, so we can merge it with the current read.
We shouldn't do that, since there was a record in between that we
ignored.
Add a flag to let process_rx_list inform tls_sw_recvmsg that it had
more data available.
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/f00c0c0afa080c60f016df1471158c1caf983c34.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we have a non-DATA record on the rx_list and another record of the
same type still on the queue, we will end up merging them:
- process_rx_list copies the non-DATA record
- we start the loop and process the first available record since it's
of the same type
- we break out of the loop since the record was not DATA
Just check the record type and jump to the end in case process_rx_list
did some work.
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/bd31449e43bd4b6ff546f5c51cf958c31c511deb.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PEEK needs to leave decrypted records on the rx_list so that we can
receive them later on, so it jumps back into the async code that
queues the skb. Unfortunately that makes us skip the
TLS_RECORD_TYPE_DATA check at the bottom of the main loop, so if two
records of the same (non-DATA) type are queued, we end up merging
them.
Add the same record type check, and make it unlikely to not penalize
the async fastpath. Async decrypt only applies to data record, so this
check is only needed for PEEK.
process_rx_list also has similar issues.
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/3df2eef4fdae720c55e69472b5bea668772b45a2.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported the following NULL pointer dereference issue [1]:
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
RIP: 0010:0x0
[...]
Call Trace:
<TASK>
sk_psock_verdict_data_ready+0x232/0x340 net/core/skmsg.c:1230
unix_stream_sendmsg+0x9b4/0x1230 net/unix/af_unix.c:2293
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
do_syscall_64+0xf9/0x240
entry_SYSCALL_64_after_hwframe+0x6f/0x77
If sk_psock_verdict_data_ready() and sk_psock_stop_verdict() are called
concurrently, psock->saved_data_ready can be NULL, causing the above issue.
This patch fixes this issue by calling the appropriate data ready function
using the sk_psock_data_ready() helper and protecting it from concurrency
with sk->sk_callback_lock.
Fixes: 6df7f764cd ("bpf, sockmap: Wake up polling after data copy")
Reported-by: syzbot+fd7b34375c1c8ce29c93@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+fd7b34375c1c8ce29c93@syzkaller.appspotmail.com
Acked-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=fd7b34375c1c8ce29c93 [1]
Link: https://lore.kernel.org/bpf/20240218150933.6004-1-syoshida@redhat.com
The CSA offset parsing happens the same way for all of
beacon template offsets, probe response template offsets
and TX offsets (for using during probe response TX from
userspace directly).
Refactor the parsing here. There's an additional check
this introduces, which is that the number of counters in
TX offsets doesn't exceed the driver capability, but as
only two counters are used at most for anything, this is
hopefully OK.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
User-space supplicant (observed at least on wpa_supplicant) historically
parses the NL80211_ATTR_AKM_SUITES from the NL80211_CMD_EXTERNAL_AUTH
message as big endian _only_ when its value is WLAN_AKM_SUITE_SAE, while
processing anything else in host endian. This behavior makes any driver
relying on SAE external auth to switch AKM suite to big endian if it is
WLAN_AKM_SUITE_SAE. A fix bringing compatibility with both endianness
has been brought into wpa_supplicant, however we must keep compatibility
with older versions, while trying to reduce the occurences of this manual
conversion in wireless drivers.
Add the be32 conversion specifically on WLAN_AKM_SUITE_SAE in nl80211 layer
to keep compatibility with older wpa_supplicant versions.
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Link: https://msgid.link/20240215-nl80211_fix_akm_suites_endianness-v1-1-57e902632f9d@bootlin.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Align the prototype of ieee80211_mle_get_bss_param_ch_cnt()
to also take a u8 * like the other functions, and make it
return -1 when the field isn't found, so that mac80211 can
check that instead of explicitly open-coding the check.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240216135047.583309181bc3.Ia61cb0b4fc034d5ac8fcfaf6f6fb2e115fadafe7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We'll need more parsing of the reduced neighbor report element,
and we already have two places doing pretty much the same.
Combine by refactoring the parsing into a separate function
with a callback for each item found.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240216135047.cfff14b692fc.Ibe25be88a769eab29ebb17b9d19af666df6a2227@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make cfg80211_inform_bss_frame_data() call the existing
cfg80211_inform_bss_data() after parsing the frame in the
appropriate way, so we have less code duplication. This
required introducing a new CFG80211_BSS_FTYPE_S1G_BEACON,
but that can be used by other drivers as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240216135047.874aed1eff5f.Ib7d88d126eec50c64763251a78cb432bb5df14df@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This function pretty much does what cfg80211_inform_single_bss_data()
already does, except on a frame data. But we can call the other one,
after populating the inform_data more completely, so we don't need to
do everything twice.
This also uncovered a few bugs:
* the 6 GHz power type checks were only done in this function, move
(and rename from 'uhb') those;
* the chains/chain_signal information wasn't used in the latter,
add that
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240216135047.f3f864f94c78.I2192adb32ab10713e71f395a9d203386264f6ed5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The ML element generation code to create a BSS entry from a per-STA
profile was not overwriting the BSS parameter change count. This meant
that the incorrect parameter change count would be reported within the
multi-link element.
Fix this by returning the BSS parameter change count from the function
and placing it into the ML element. The returned tbtt info was never
used, so just drop that to simplify the code.
Fixes: 5f478adf1f ("wifi: cfg80211: generate an ML element for per-STA profiles")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240216135047.f2a507634692.I06b122c7a319a38b4e970f5e0bd3d3ef9cac4cbe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The KHZ_PER_GHZ might be used by others (with the name aligned
with similar constants). Define it in units.h and convert
wireless to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/20240215154136.630029-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The assignment to pointer cache in function mesh_fast_tx_gc can
be made at the declaration time rather than a later assignment.
There are also 3 functions where pointer cache is being initialized
at declaration time and later re-assigned again with the same
value, these are redundant and can be removed.
Cleans up code and three clang scan build warnings:
warning: Value stored to 'cache' during its initialization is never
read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/20240215232151.2075483-1-colin.i.king@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, function to check if beacon countdown is complete uses deflink
to fetch the beacon and check the counter. However, with MLO, there is
a need to check the counter for the beacon in a particular link.
Add support to use link_id in order to fetch the beacon from a particular
link data.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240216144621.514385-2-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
syzbot reported another task hung in __unix_gc(). [0]
The current while loop assumes that all of the left candidates
have oob_skb and calling kfree_skb(oob_skb) releases the remaining
candidates.
However, I missed a case that oob_skb has self-referencing fd and
another fd and the latter sk is placed before the former in the
candidate list. Then, the while loop never proceeds, resulting
the task hung.
__unix_gc() has the same loop just before purging the collected skb,
so we can call kfree_skb(oob_skb) there and let __skb_queue_purge()
release all inflight sockets.
[0]:
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 2784 Comm: kworker/u4:8 Not tainted 6.8.0-rc4-syzkaller-01028-g71b605d32017 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Workqueue: events_unbound __unix_gc
RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x70 kernel/kcov.c:200
Code: 89 fb e8 23 00 00 00 48 8b 3d 84 f5 1a 0c 48 89 de 5b e9 43 26 57 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 <f3> 0f 1e fa 48 8b 04 24 65 48 8b 0d 90 52 70 7e 65 8b 15 91 52 70
RSP: 0018:ffffc9000a17fa78 EFLAGS: 00000287
RAX: ffffffff8a0a6108 RBX: ffff88802b6c2640 RCX: ffff88802c0b3b80
RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000
RBP: ffffc9000a17fbf0 R08: ffffffff89383f1d R09: 1ffff1100ee5ff84
R10: dffffc0000000000 R11: ffffed100ee5ff85 R12: 1ffff110056d84ee
R13: ffffc9000a17fae0 R14: 0000000000000000 R15: ffffffff8f47b840
FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffef5687ff8 CR3: 0000000029b34000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<NMI>
</NMI>
<TASK>
__unix_gc+0xe69/0xf40 net/unix/garbage.c:343
process_one_work kernel/workqueue.c:2633 [inline]
process_scheduled_works+0x913/0x1420 kernel/workqueue.c:2706
worker_thread+0xa5f/0x1000 kernel/workqueue.c:2787
kthread+0x2ef/0x390 kernel/kthread.c:388
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242
</TASK>
Reported-and-tested-by: syzbot+ecab4d36f920c3574bf9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ecab4d36f920c3574bf9
Fixes: 25236c91b5 ("af_unix: Fix task hung while purging oob_skb in GC.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The second "new features" pull request for v6.9. Lots of iwlwifi and
stack changes this time. And naturally smaller changes to other drivers.
We also twice merged wireless into wireless-next to avoid conflicts
between the trees.
Major changes:
stack
* mac80211: negotiated TTLM request support
* SPP A-MSDU support
* mac80211: wider bandwidth OFDMA config support
iwlwifi
* kunit tests
* bump FW API to 89 for AX/BZ/SC devices
* enable SPP A-MSDUs
* support for new devices
ath12k
* refactoring in preparation for Multi-Link Operation (MLO) support
* 1024 Block Ack window size support
* provide firmware wmi logs via a trace event
ath11k
* 36 bit DMA mask support
* support 6 GHz station power modes: Low Power Indoor (LPI), Standard
Power) SP and Very Low Power (VLP)
rtl8xxxu
* TP-Link TL-WN823N V2 support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmXU2PgRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuzZAf+NsvOkkhIoMG3rYmqli9ELEgupBIEoTwo
2favVGBbLOPIlvUJab3ZZ8Bsntpk3deRmISN27whNm5B3+36c7DKn3aYauVwUNs2
Qb99f3HXkGZQJ8DdKLZMviXXMgKfXzpVISwzD7HdV/GhkVX4LZ/MFzv1zrvLAC/J
LN5K6xKUqbgRJ1kAWbEoJpRCzNtKwx9GHAsO1vhL69yjBAqKkHivV9LE+BNjoXEz
g/LD0z05JqWDyxJ7yud3+DiBlZtvpmK9oa9gpWnuF8sdvkywyBdP/ipfDDLgbCzY
vKF1IUy5GNJSt5+AQS+zO0a8HrwzHR+XG8w5sCEKpjh3Nj0cxtFJ5w==
=Bnyy
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The second "new features" pull request for v6.9. Lots of iwlwifi and
stack changes this time. And naturally smaller changes to other drivers.
We also twice merged wireless into wireless-next to avoid conflicts
between the trees.
Major changes:
stack
* mac80211: negotiated TTLM request support
* SPP A-MSDU support
* mac80211: wider bandwidth OFDMA config support
iwlwifi
* kunit tests
* bump FW API to 89 for AX/BZ/SC devices
* enable SPP A-MSDUs
* support for new devices
ath12k
* refactoring in preparation for Multi-Link Operation (MLO) support
* 1024 Block Ack window size support
* provide firmware wmi logs via a trace event
ath11k
* 36 bit DMA mask support
* support 6 GHz station power modes: Low Power Indoor (LPI), Standard
Power) SP and Very Low Power (VLP)
rtl8xxxu
* TP-Link TL-WN823N V2 support
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
And change cache name from 'ip_dst_cache' to 'rtable'.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
And change cache name from 'ip_mrt_cache' to 'mfc_cache'.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
And change cache name from 'ip6_mrt_cache' to 'mfc6_cache'.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
And change cache name from 'kcm_mux_cache' to 'kcm_mux',
'kcm_psock_cache' to 'kcm_psock'.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct xt_entry_target fake flexible array has not be converted to a
true flexible array, which is mainly blocked by it being both UAPI and
used in the middle of other structures. In order to properly check for
0-sized destinations in memcpy(), an exception must be made for the one
place where it is still a destination. Since memcpy() was already
skipping checks for 0-sized destinations, using unsafe_memcpy() is no
change in behavior.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
No need to keep this in the core, move it to the nfnetlink_queue module.
nf_reroute is moved too, there were no other callers.
Signed-off-by: Florian Westphal <fw@strlen.de>
An earlier attempt changed this to GFP_KERNEL, but the get helper is
also called for get requests from userspace, which uses rcu.
Let the caller pass in the kmalloc flags to allow insertions
to schedule if needed.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Insertions into the set are slow when we try to add many elements.
For 800k elements I get:
time nft -f pipapo_800k
real 19m34.849s
user 0m2.390s
sys 19m12.828s
perf stats:
--95.39%--nft_pipapo_insert
|--76.60%--pipapo_insert
| --76.37%--pipapo_resize
| |--72.87%--memcpy_orig
| |--1.88%--__free_pages_ok
| | --0.89%--free_tail_page_prepare
| --1.38%--kvmalloc_node
..
--18.56%--pipapo_get.isra.0
|--13.91%--__bitmap_and
|--3.01%--pipapo_refill
|--0.81%--__kmalloc
| --0.74%--__kmalloc_large_node
| --0.66%--__alloc_pages
..
--0.52%--memset_orig
So lots of time is spent in copying exising elements to make space for
the next one.
Instead of allocating to the exact size of the new rule count, allocate
extra slack to reduce alloc/copy/free overhead.
After:
time nft -f pipapo_800k
real 1m54.110s
user 0m2.515s
sys 1m51.377s
--80.46%--nft_pipapo_insert
|--73.45%--pipapo_get.isra.0
|--57.63%--__bitmap_and
| |--8.52%--pipapo_refill
|--3.45%--__kmalloc
| --3.05%--__kmalloc_large_node
| --2.58%--__alloc_pages
--2.59%--memset_orig
|--6.51%--pipapo_insert
--5.96%--pipapo_resize
|--3.63%--memcpy_orig
--2.13%--kvmalloc_node
The new @rules_alloc fills a hole, so struct size doesn't go up.
Also make it so rule removal doesn't shrink unless the free/extra space
exceeds two pages. This should be safe as well:
When a rule gets removed, the attempt to lower the allocated size is
already allowed to fail.
Exception: do exact allocations as long as set is very small (less
than one page needed).
v2: address comments from Stefano:
kdoc comment
formatting changes
remove redundant assignment
switch back to PAGE_SIZE
Link: https://lore.kernel.org/netfilter-devel/20240213141753.17ef27a6@elisabeth/
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
The set uses a mix of 'int', 'unsigned int', and size_t.
The rule count limit is NFT_PIPAPO_RULE0_MAX, which cannot
exceed INT_MAX (a few helpers use 'int' as return type).
Add a compile-time assertion for this.
Replace size_t usage in structs with unsigned int or u8 where
the stored values are smaller.
Replace signed-int arguments for lengths with 'unsigned int'
where possible.
Last, remove lt_aligned member: its set but never read.
struct nft_pipapo_match 40 bytes -> 32 bytes
struct nft_pipapo_field 56 bytes -> 32 bytes
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
pipapo relies on kmalloc(0) returning ZERO_SIZE_PTR (i.e., not NULL
but pointer is invalid).
Rework this to not call slab allocator when we'd request a 0-byte
allocation.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Those get called from packet path, content must not be modified.
No functional changes intended.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Randy Dunlap reports arptables build failure:
arp_tables.c:(.text+0x20): undefined reference to `xt_find_table'
... because recent change removed a 'select' on the xtables core.
Add a "depends" clause on arptables to resolve this.
Kernel test robot reports another build breakage:
iptable_nat.c:(.text+0x8): undefined reference to `ipt_unregister_table_exit'
... because of a typo, the nat table selected ip6tables.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/netfilter-devel/d0dfbaef-046a-4c42-9daa-53636664bf6d@infradead.org/
Fixes: a9525c7f62 ("netfilter: xtables: allow xtables-nft only builds")
Fixes: 4654467dc7 ("netfilter: arptables: allow xtables-nft only builds")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Florian Westphal <fw@strlen.de>
Remove useless branch to check for errors in nft_parse_register_store().
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Sanitize nf_logger_find_get() input parameters, no caller in the tree
passes invalid values.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Consolidate pointer fetch to logger and check for NULL in
__find_logger().
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the vlan_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the l2tpeth_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the hsr_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the br_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the dsa_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmXUZiITHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28b8KLB/9MKkUjbbBh9nXezyWdXnulj5jpHWlJ
Xa7Sz7e+Gw5HbpK1/RF3Mb3/uf5D+DTMa2jjUJhezGCugW6ugoFapDC1bJxdafIN
pAZQG/7EYi4TqHEO3/aS5sMh3pISs29COnmHHdQCYfyTMZPKGcDkJuwa7POhHhR1
zrjavD0N2ihBfhoadlT+GQ9QYu+JyWnjrB27hSznsktW9Jeju1u6F9nvOXn60aZU
e7QXgsKe94YXLEed3hj7buPAIirY+tLKIpbw7TtJJwk6EBnnK17S+2wydR0N7yWK
SSsaKJxZCiiaoYkl9chkKTyqh2I3qa/HsxUrFY3TGx5VMhWLiiH/r5eI
=pIjg
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.9-20240220' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-02-20
this is a pull request of 9 patches for net-next/master.
The first patch is by Francesco Dolcini and removes a redundant check
for pm_clock_support from the m_can driver.
Martin Hundebøll contributes 3 patches to the m_can/tcan4x5x driver to
allow resume upon RX of a CAN frame.
3 patches by Srinivas Goud add support for ECC statistics to the
xilinx_can driver.
The last 2 patches are by Oliver Hartkopp and me, target the CAN RAW
protocol and fix an error in the getsockopt() for CAN-XL introduced in
the previous pull request to net-next (linux-can-next-for-6.9-20240213).
linux-can-next-for-6.9-20240220
* tag 'linux-can-next-for-6.9-20240220' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: raw: raw_getsockopt(): reduce scope of err
can: raw: fix getsockopt() for new CAN_RAW_XL_VCID_OPTS
can: xilinx_can: Add ethtool stats interface for ECC errors
can: xilinx_can: Add ECC support
dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
can: tcan4x5x: support resuming from rx interrupt signal
can: m_can: allow keeping the transceiver running in suspend
dt-bindings: can: tcan4x5x: Document the wakeup-source flag
can: m_can: remove redundant check for pm_clock_support
====================
Link: https://lore.kernel.org/r/20240220085130.2936533-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The variable len being initialized with a value that is never read, an
if statement is initializing it in both paths of the if statement.
The initialization is redundant and can be removed.
Cleans up clang scan build warning:
net/ipv4/tcp_ao.c:512:11: warning: Value stored to 'len' during its
initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20240216125443.2107244-1-colin.i.king@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The pernet operations structure for the subsystem must be registered
before registering the generic netlink family.
Make an unregister in case of unsuccessful registration.
Fixes: 687125b579 ("devlink: split out core code")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20240215203400.29976-1-kovalev@altlinux.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The pernet operations structure for the subsystem must be registered
before registering the generic netlink family.
Fixes: 915d7e5e59 ("ipv6: sr: add code base for control plane support of SR-IPv6")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20240215202717.29815-1-kovalev@altlinux.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reduce the scope of the variable "err" to the individual cases. This
is to avoid the mistake of setting "err" in the mistaken belief that
it will be evaluated later.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240220-raw-setsockopt-v1-1-7d34cb1377fc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Use struct netmem* instead of page in skb_frag_t. Currently struct
netmem* is always a struct page underneath, but the abstraction
allows efforts to add support for skb frags not backed by pages.
There is unfortunately 1 instance where the skb_frag_t is assumed to be
a exactly a bio_vec in kcm. For this case, WARN_ON_ONCE and return error
before doing a cast.
Add skb[_frag]_fill_netmem_*() and skb_add_rx_frag_netmem() helpers so
that the API can be used to create netmem skbs.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The code for the CAN_RAW_XL_VCID_OPTS getsockopt() was incompletely adopted
from the CAN_RAW_FILTER getsockopt().
Add the missing put_user() and return statements.
Flagged by Smatch.
Fixes: c83c22ec14 ("can: canxl: add virtual CAN network identifier support")
Reported-by: Simon Horman <horms@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20240219200021.12113-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Creation of sysfs entries is expensive, mainly for workloads that
constantly creates netdev and netns often.
Do not create BQL sysfs entries for devices that don't need,
basically those that do not have a real queue, i.e, devices that has
NETIF_F_LLTX and IFF_NO_QUEUE, such as `lo` interface.
This will remove the /sys/class/net/eth0/queues/tx-X/byte_queue_limits/
directory for these devices.
In the example below, eth0 has the `byte_queue_limits` directory but not
`lo`.
# ls /sys/class/net/lo/queues/tx-0/
traffic_class tx_maxrate tx_timeout xps_cpus xps_rxqs
# ls /sys/class/net/eth0/queues/tx-0/byte_queue_limits/
hold_time inflight limit limit_max limit_min
This also removes the #ifdefs, since we can also use netdev_uses_bql() to
check if the config is enabled. (as suggested by Jakub).
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240216094154.3263843-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use global percpu page_pool_recycle_stats counter for system page_pool
allocator instead of allocating a separate percpu variable for each
(also percpu) page pool instance.
Reviewed-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/87f572425e98faea3da45f76c3c68815c01a20ee.1708075412.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that direct recycling is performed basing on pool->cpuid when set,
memory leaks are possible:
1. A pool is destroyed.
2. Alloc cache is emptied (it's done only once).
3. pool->cpuid is still set.
4. napi_pp_put_page() does direct recycling basing on pool->cpuid.
5. Now alloc cache is not empty, but it won't ever be freed.
In order to avoid that, rewrite pool->cpuid to -1 when unlinking NAPI to
make sure no direct recycling will be possible after emptying the cache.
This involves a bit of overhead as pool->cpuid now must be accessed
via READ_ONCE() to avoid partial reads.
Rename page_pool_unlink_napi() -> page_pool_disable_direct_recycling()
to reflect what it actually does and unexport it.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240215113905.96817-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct tc_pedit.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fullmesh endpoints could end-up unexpectedly generating duplicate
subflows - same local and remote addresses - when multiple incoming
ADD_ADDR are processed before the PM creates the subflow for the local
endpoints.
Address the issue explicitly checking for duplicates at subflow
creation time.
To avoid a quadratic computational complexity, track the unavailable
remote address ids in a temporary bitmap and initialize such bitmap
with the remote ids of all the existing subflows matching the local
address currently processed.
The above allows additionally replacing the existing code checking
for duplicate entry in the current set with a simple bit test
operation.
Fixes: 2843ff6f36 ("mptcp: remote addresses fullmesh")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/435
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to the previous patch, address the data race on
remote_id, adding the suitable ONCE annotations.
Fixes: bedee0b561 ("mptcp: address lookup improvements")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The local address id is accessed lockless by the NL PM, add
all the required ONCE annotation. There is a caveat: the local
id can be initialized late in the subflow life-cycle, and its
validity is controlled by the local_id_valid flag.
Remove such flag and encode the validity in the local_id field
itself with negative value before initialization. That allows
accessing the field consistently with a single read operation.
Fixes: 0ee4261a36 ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the introduction of the subflow ULP diag interface, the
dump callback accessed all the subflow data with lockless.
We need either to annotate all the read and write operation accordingly,
or acquire the subflow socket lock. Let's do latter, even if slower, to
avoid a diffstat havoc.
Fixes: 5147dfb508 ("mptcp: allow dumping subflow context to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just the same as userspace PM, a new parameter needs_id is added for
in-kernel PM mptcp_pm_nl_append_new_local_addr() too.
Add a new helper mptcp_pm_has_addr_attr_id() to check whether an address
ID is set from PM or not.
In mptcp_pm_nl_get_local_id(), needs_id is always true, but in
mptcp_pm_nl_add_addr_doit(), pass mptcp_pm_has_addr_attr_id() to
needs_it.
Fixes: efd5a4c04e ("mptcp: add the address ID assignment bitmap")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When userspace PM requires to create an ID 0 subflow in "userspace pm
create id 0 subflow" test like this:
userspace_pm_add_sf $ns2 10.0.3.2 0
An ID 1 subflow, in fact, is created.
Since in mptcp_pm_nl_append_new_local_addr(), 'id 0' will be treated as
no ID is set by userspace, and will allocate a new ID immediately:
if (!e->addr.id)
e->addr.id = find_next_zero_bit(pernet->id_bitmap,
MPTCP_PM_MAX_ADDR_ID + 1,
1);
To solve this issue, a new parameter needs_id is added for
mptcp_userspace_pm_append_new_local_addr() to distinguish between
whether userspace PM has set an ID 0 or whether userspace PM has
not set any address.
needs_id is true in mptcp_userspace_pm_get_local_id(), but false in
mptcp_pm_nl_announce_doit() and mptcp_pm_nl_subflow_create_doit().
Fixes: e5ed101a60 ("mptcp: userspace pm allow creating id 0 subflow")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
net->dev_base_seq and ipv6.dev_addr_genid are monotonically increasing.
If we XOR their values, we could miss to detect if both values
were changed with the same amount.
Fixes: 63998ac24f ("ipv6: provide addr and netconf dump consistency info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net->dev_base_seq and ipv4.dev_addr_genid are monotonically increasing.
If we XOR their values, we could miss to detect if both values
were changed with the same amount.
Fixes: 0465277f6b ("ipv4: provide addr and netconf dump consistency info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is impossible to disable BQL individually today, since there is no
prompt for the Kconfig entry, so, the BQL is always enabled if SYSFS is
enabled.
Create a prompt entry for BQL, so, it could be enabled or disabled at
build time independently of SYSFS.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we're redirecting the skb, and haven't called tcf_mirred_forward(),
yet, we need to tell the core to drop the skb by setting the retcode
to SHOT. If we have called tcf_mirred_forward(), however, the skb
is out of our hands and returning SHOT will lead to UaF.
Move the retval override to the error path which actually need it.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Fixes: e5cf1baf92 ("act_mirred: use TC_ACT_REINSERT when possible")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test Davide added in commit ca22da2fbd ("act_mirred: use the backlog
for nested calls to mirred ingress") hangs our testing VMs every 10 or so
runs, with the familiar tcp_v4_rcv -> tcp_v4_rcv deadlock reported by
lockdep.
The problem as previously described by Davide (see Link) is that
if we reverse flow of traffic with the redirect (egress -> ingress)
we may reach the same socket which generated the packet. And we may
still be holding its socket lock. The common solution to such deadlocks
is to put the packet in the Rx backlog, rather than run the Rx path
inline. Do that for all egress -> ingress reversals, not just once
we started to nest mirred calls.
In the past there was a concern that the backlog indirection will
lead to loss of error reporting / less accurate stats. But the current
workaround does not seem to address the issue.
Fixes: 53592b3640 ("net/sched: act_mirred: Implement ingress actions")
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When unoffloading a device, it is important to ensure that all
relevant deferred events are delivered to it before it disassociates
itself from the bridge.
Before this change, this was true for the normal case when a device
maps 1:1 to a net_bridge_port, i.e.
br0
/
swp0
When swp0 leaves br0, the call to switchdev_deferred_process() in
del_nbp() makes sure to process any outstanding events while the
device is still associated with the bridge.
In the case when the association is indirect though, i.e. when the
device is attached to the bridge via an intermediate device, like a
LAG...
br0
/
lag0
/
swp0
...then detaching swp0 from lag0 does not cause any net_bridge_port to
be deleted, so there was no guarantee that all events had been
processed before the device disassociated itself from the bridge.
Fix this by always synchronously processing all deferred events before
signaling completion of unoffloading back to the driver.
Fixes: 4e51bf44a0 ("net: bridge: move the switchdev object replay helpers to "push" mode")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before this change, generation of the list of MDB events to replay
would race against the creation of new group memberships, either from
the IGMP/MLD snooping logic or from user configuration.
While new memberships are immediately visible to walkers of
br->mdb_list, the notification of their existence to switchdev event
subscribers is deferred until a later point in time. So if a replay
list was generated during a time that overlapped with such a window,
it would also contain a replay of the not-yet-delivered event.
The driver would thus receive two copies of what the bridge internally
considered to be one single event. On destruction of the bridge, only
a single membership deletion event was therefore sent. As a
consequence of this, drivers which reference count memberships (at
least DSA), would be left with orphan groups in their hardware
database when the bridge was destroyed.
This is only an issue when replaying additions. While deletion events
may still be pending on the deferred queue, they will already have
been removed from br->mdb_list, so no duplicates can be generated in
that scenario.
To a user this meant that old group memberships, from a bridge in
which a port was previously attached, could be reanimated (in
hardware) when the port joined a new bridge, without the new bridge's
knowledge.
For example, on an mv88e6xxx system, create a snooping bridge and
immediately add a port to it:
root@infix-06-0b-00:~$ ip link add dev br0 up type bridge mcast_snooping 1 && \
> ip link set dev x3 up master br0
And then destroy the bridge:
root@infix-06-0b-00:~$ ip link del dev br0
root@infix-06-0b-00:~$ mvls atu
ADDRESS FID STATE Q F 0 1 2 3 4 5 6 7 8 9 a
DEV:0 Marvell 88E6393X
33:33:00:00:00:6a 1 static - - 0 . . . . . . . . . .
33:33:ff:87:e4:3f 1 static - - 0 . . . . . . . . . .
ff:ff:ff:ff:ff:ff 1 static - - 0 1 2 3 4 5 6 7 8 9 a
root@infix-06-0b-00:~$
The two IPv6 groups remain in the hardware database because the
port (x3) is notified of the host's membership twice: once via the
original event and once via a replay. Since only a single delete
notification is sent, the count remains at 1 when the bridge is
destroyed.
Then add the same port (or another port belonging to the same hardware
domain) to a new bridge, this time with snooping disabled:
root@infix-06-0b-00:~$ ip link add dev br1 up type bridge mcast_snooping 0 && \
> ip link set dev x3 up master br1
All multicast, including the two IPv6 groups from br0, should now be
flooded, according to the policy of br1. But instead the old
memberships are still active in the hardware database, causing the
switch to only forward traffic to those groups towards the CPU (port
0).
Eliminate the race in two steps:
1. Grab the write-side lock of the MDB while generating the replay
list.
This prevents new memberships from showing up while we are generating
the replay list. But it leaves the scenario in which a deferred event
was already generated, but not delivered, before we grabbed the
lock. Therefore:
2. Make sure that no deferred version of a replay event is already
enqueued to the switchdev deferred queue, before adding it to the
replay list, when replaying additions.
Fixes: 4f2673b3a2 ("net: bridge: add helper to replay port and host-joined mdb entries")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
iucv_path_table is a dynamically allocated array of pointers to
struct iucv_path items. Yet, its size is calculated as if it was
an array of struct iucv_path items.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code block under the "!ds->user_mii_bus && ds->ops->phy_read" check
under dsa_switch_setup() populates ds->user_mii_bus. The use of
ds->user_mii_bus is inappropriate when the MDIO bus of the switch is
described on the device tree [1].
For this reason, use this code block only for switches [with MDIO bus]
probed on platform_data, and OF which the switch MDIO bus isn't described
on the device tree. Therefore, remove OF-based MDIO bus registration as
it's useless for these cases.
These subdrivers which control switches [with MDIO bus] probed on OF, will
lose the ability to register the MDIO bus OF-based:
drivers/net/dsa/b53/b53_common.c
drivers/net/dsa/lan9303-core.c
drivers/net/dsa/vitesse-vsc73xx-core.c
These subdrivers let the DSA core driver register the bus:
- ds->ops->phy_read() and ds->ops->phy_write() are present.
- ds->user_mii_bus is not populated.
The commit fe7324b932 ("net: dsa: OF-ware slave_mii_bus") which brought
OF-based MDIO bus registration on the DSA core driver is reasonably recent
and, in this time frame, there have been no device trees in the Linux
repository that started describing the MDIO bus, or dt-bindings defining
the MDIO bus for the switches these subdrivers control. So I don't expect
any devices to be affected.
The logic we encourage is that all subdrivers should register the switch
MDIO bus on their own [2]. And, for subdrivers which control switches [with
MDIO bus] probed on OF, this logic must be followed to support all cases
properly:
No switch MDIO bus defined: Populate ds->user_mii_bus, register the MDIO
bus, set the interrupts for PHYs if "interrupt-controller" is defined at
the switch node. This case should only be covered for the switches which
their dt-bindings documentation didn't document the MDIO bus from the
start. This is to keep supporting the device trees that do not describe the
MDIO bus on the device tree but the MDIO bus is being used nonetheless.
Switch MDIO bus defined: Don't populate ds->user_mii_bus, register the MDIO
bus, set the interrupts for PHYs if ["interrupt-controller" is defined at
the switch node and "interrupts" is defined at the PHY nodes under the
switch MDIO bus node].
Switch MDIO bus defined but explicitly disabled: If the device tree says
status = "disabled" for the MDIO bus, we shouldn't need an MDIO bus at all.
Instead, just exit as early as possible and do not call any MDIO API.
After all subdrivers that control switches with MDIO buses are made to
register the MDIO buses on their own, we will be able to get rid of
dsa_switch_ops :: phy_read() and :: phy_write(), and the code block for
registering the MDIO bus on the DSA core driver.
Link: https://lore.kernel.org/netdev/20231213120656.x46fyad6ls7sqyzv@skbuf/ [1]
Link: https://lore.kernel.org/netdev/20240103184459.dcbh57wdnlox6w7d@skbuf/ [2]
Suggested-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Acked-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240213-for-netnext-dsa-mdio-bus-v2-1-0ff6f4823a9e@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add genetlink family bind()/unbind() callbacks when adding/removing
multicast group to/from netlink client socket via setsockopt() or
bind() syscall.
They can be used to track if consumers of netlink multicast messages
emerge or disappear. Thus, a client implementing callbacks, can now
send events only when there are active consumers, preventing unnecessary
work when none exist.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240212161615.161935-2-stanislaw.gruszka@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- af_unix: fix task hung while purging oob_skb in GC
- pds_core: do not try to run health-thread in VF path
Current release - new code bugs:
- sched: act_mirred: don't zero blockid when net device is being deleted
Previous releases - regressions:
- netfilter:
- nat: restore default DNAT behavior
- nf_tables: fix bidirectional offload, broken when unidirectional
offload support was added
- openvswitch: limit the number of recursions from action sets
- eth: i40e: do not allow untrusted VF to remove administratively
set MAC address
Previous releases - always broken:
- tls: fix races and bugs in use of async crypto
- mptcp: prevent data races on some of the main socket fields,
fix races in fastopen handling
- dpll: fix possible deadlock during netlink dump operation
- dsa: lan966x: fix crash when adding interface under a lag
when some of the ports are disabled
- can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
Misc:
- handful of fixes and reliability improvements for selftests
- fix sysfs documentation missing net/ in paths
- finish the work of squashing the missing MODULE_DESCRIPTION()
warnings in networking
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YRod
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, wireless and netfilter.
Current release - regressions:
- af_unix: fix task hung while purging oob_skb in GC
- pds_core: do not try to run health-thread in VF path
Current release - new code bugs:
- sched: act_mirred: don't zero blockid when net device is being
deleted
Previous releases - regressions:
- netfilter:
- nat: restore default DNAT behavior
- nf_tables: fix bidirectional offload, broken when unidirectional
offload support was added
- openvswitch: limit the number of recursions from action sets
- eth: i40e: do not allow untrusted VF to remove administratively set
MAC address
Previous releases - always broken:
- tls: fix races and bugs in use of async crypto
- mptcp: prevent data races on some of the main socket fields, fix
races in fastopen handling
- dpll: fix possible deadlock during netlink dump operation
- dsa: lan966x: fix crash when adding interface under a lag when some
of the ports are disabled
- can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
Misc:
- a handful of fixes and reliability improvements for selftests
- fix sysfs documentation missing net/ in paths
- finish the work of squashing the missing MODULE_DESCRIPTION()
warnings in networking"
* tag 'net-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
net: fill in MODULE_DESCRIPTION()s for missing arcnet
net: fill in MODULE_DESCRIPTION()s for mdio_devres
net: fill in MODULE_DESCRIPTION()s for ppp
net: fill in MODULE_DESCRIPTION()s for fddik/skfp
net: fill in MODULE_DESCRIPTION()s for plip
net: fill in MODULE_DESCRIPTION()s for ieee802154/fakelb
net: fill in MODULE_DESCRIPTION()s for xen-netback
net: ravb: Count packets instead of descriptors in GbEth RX path
pppoe: Fix memory leak in pppoe_sendmsg()
net: sctp: fix skb leak in sctp_inq_free()
net: bcmasp: Handle RX buffer allocation failure
net-timestamp: make sk_tskey more predictable in error path
selftests: tls: increase the wait in poll_partial_rec_async
ice: Add check for lport extraction to LAG init
netfilter: nf_tables: fix bidirectional offload regression
netfilter: nat: restore default DNAT behavior
netfilter: nft_set_pipapo: fix missing : in kdoc
igc: Remove temporary workaround
igb: Fix string truncation warnings in igb_set_fw_version
can: netlink: Fix TDCO calculation using the old data bittiming
...
In case of GSO, 'chunk->skb' pointer may point to an entry from
fraglist created in 'sctp_packet_gso_append()'. To avoid freeing
random fraglist entry (and so undefined behavior and/or memory
leak), introduce 'sctp_inq_chunk_free()' helper to ensure that
'chunk->skb' is set to 'chunk->head_skb' (i.e. fraglist head)
before calling 'sctp_chunk_free()', and use the aforementioned
helper in 'sctp_inq_pop()' as well.
Reported-by: syzbot+8bb053b5d63595ab47db@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=0d8351bbe54fd04a492c2daab0164138db008042
Fixes: 90017accff ("sctp: Add GSO support")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20240214082224.10168-1-dmantipov@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the preferred lifetime was less than the minimum required lifetime,
ipv6_create_tempaddr would error out without creating any new address.
On my machine and network, this error happened immediately with the
preferred lifetime set to 5 seconds or less, after a few minutes with
the preferred lifetime set to 6 seconds, and not at all with the
preferred lifetime set to 7 seconds. During my investigation, I found a
Stack Exchange post from another person who seems to have had the same
problem: They stopped getting new addresses if they lowered the
preferred lifetime below 3 seconds, and they didn't really know why.
The preferred lifetime is a preference, not a hard requirement. The
kernel does not strictly forbid new connections on a deprecated address,
nor does it guarantee that the address will be disposed of the instant
its total valid lifetime expires. So rather than disable IPv6 privacy
extensions altogether if the minimum required lifetime swells above the
preferred lifetime, it is more in keeping with the user's intent to
increase the temporary address's lifetime to the minimum necessary for
the current network conditions.
With these fixes, setting the preferred lifetime to 5 or 6 seconds "just
works" because the extra fraction of a second is practically
unnoticeable. It's even possible to reduce the time before deprecation
to 1 or 2 seconds by setting /proc/sys/net/ipv6/conf/*/regen_min_advance
and /proc/sys/net/ipv6/conf/*/dad_transmits to 0. I realize that that is
a pretty niche use case, but I know at least one person who would gladly
sacrifice performance and convenience to be sure that they are getting
the maximum possible level of privacy.
Link: https://serverfault.com/a/1031168/310447
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In RFC 8981, REGEN_ADVANCE cannot be less than 2 seconds, and the RFC
does not permit the creation of temporary addresses with lifetimes
shorter than that:
> When processing a Router Advertisement with a
> Prefix Information option carrying a prefix for the purposes of
> address autoconfiguration (i.e., the A bit is set), the host MUST
> perform the following steps:
> 5. A temporary address is created only if this calculated preferred
> lifetime is greater than REGEN_ADVANCE time units.
However, some users want to change their IPv6 address as frequently as
possible regardless of the RFC's arbitrary minimum lifetime. For the
benefit of those users, add a regen_min_advance sysctl parameter that
can be set to below or above 2 seconds.
Link: https://datatracker.ietf.org/doc/html/rfc8981
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
RFC 8981 defines REGEN_ADVANCE as follows:
REGEN_ADVANCE = 2 + (TEMP_IDGEN_RETRIES * DupAddrDetectTransmits * RetransTimer / 1000)
Thus, allowing it to be less than 2 seconds is technically a protocol
violation.
Link: https://datatracker.ietf.org/doc/html/rfc8981#name-defined-protocol-parameters
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Consolidate the error paths of tipc_nl_bearer_add() under the common label
if the function holds rtnl_lock.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20240213134058.386123-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=G4r8
-----END PGP SIGNATURE-----
Merge tag 'nf-24-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Missing : in kdoc field in nft_set_pipapo.
2) Restore default DNAT behavior When a DNAT rule is configured via
iptables with different port ranges, from Kyle Swenson.
3) Restore flowtable hardware offload for bidirectional flows
by setting NF_FLOW_HW_BIDIRECTIONAL flag, from Felix Fietkau.
netfilter pull request 24-02-15
* tag 'nf-24-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix bidirectional offload regression
netfilter: nat: restore default DNAT behavior
netfilter: nft_set_pipapo: fix missing : in kdoc
====================
Link: https://lore.kernel.org/r/20240214233818.7946-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmXMwlUTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28bwDmCACBeVNV2d9mL8AwNoaIiUmOHF8LsclP
NsRSl4rz/TMDFgO2tX9oUQGLsZG0YTSqJ5dF3qI7zjskBlTBJX0y4fByvQAQ6mU9
ZhwZMBz3JSS+tuZFIMWqHW1yq2TXoTnx1IzIM5f+D83LWqtP5Jto15lw1Ratrtat
taZwGwR10cEWO0IFNUx+4c5SGa+gGbEBdr7UBlJU1MdZ9fzo+ByV/H6JrfY1qqEj
DvraQm/oNCVrSP5dVr1s+0Kqnh1X1ff+6JWs5q2CJDN7E+Ai2cOxrEd2/JP7GANG
S0UIqH744z3kJDSE+GuQjxF4vbXqX3qfKIP4Q+EYlNvs0oskIQ5ebCsW
=So6Y
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.8-20240214' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-02-14
this is a pull request of 3 patches for net/master.
the first patch is by Ziqi Zhao and targets the CAN J1939 protocol, it
fixes a potential deadlock by replacing the spinlock by an rwlock.
Oleksij Rempel's patch adds a missing spin_lock_bh() to prevent a
potential Use-After-Free in the CAN J1939's
setsockopt(SO_J1939_FILTER).
Maxime Jayat contributes a patch to fix the transceiver delay
compensation (TDCO) calculation, which is needed for higher CAN-FD bit
rates (usually 2Mbit/s).
* tag 'linux-can-fixes-for-6.8-20240214' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: netlink: Fix TDCO calculation using the old data bittiming
can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
====================
Link: https://lore.kernel.org/r/20240214140348.2412776-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When SOF_TIMESTAMPING_OPT_ID is used to ambiguate timestamped datagrams,
the sk_tskey can become unpredictable in case of any error happened
during sendmsg(). Move increment later in the code and make decrement of
sk_tskey in error path. This solution is still racy in case of multiple
threads doing snedmsg() over the very same socket in parallel, but still
makes error path much more predictable.
Fixes: 09c2d251b7 ("net-timestamp: add key to disambiguate concurrent datagrams")
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240213110428.1681540-1-vadfed@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It's currently possible to change the mesh ID when the
interface isn't yet in mesh mode, at the same time as
changing it into mesh mode. This leads to an overwrite
of data in the wdev->u union for the interface type it
currently has, causing cfg80211_change_iface() to do
wrong things when switching.
We could probably allow setting an interface to mesh
while setting the mesh ID at the same time by doing a
different order of operations here, but realistically
there's no userspace that's going to do this, so just
disallow changes in iftype when setting mesh ID.
Cc: stable@vger.kernel.org
Fixes: 29cbe68c51 ("cfg80211/mac80211: add mesh join/leave commands")
Reported-by: syzbot+dd4779978217b1973180@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Even if that's the same as IEEE80211_MAX_SSID_LEN, we really
should just use IEEE80211_MAX_MESH_ID_LEN for mesh, rather
than having the BUILD_BUG_ON()s.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's a conflict already and some upcoming changes
also depend on changes in wireless for being conflict-
free, so pull wireless in to make all that easier.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
that's how we love it ;-)
iwlwifi:
- correct A3 in A-MSDUs
- fix crash when operating as AP and running out of station
slots to use
- clear link ID to correct some later checks against it
- fix error codes in SAR table loading
- fix error path in PPAG table read
mac80211:
- reload a pointer after SKB may have changed
(only in certain monitor inject mode scenarios)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmXNCSMACgkQ10qiO8sP
aAA79A//SAXDwnnfJDa+F57aqFFSQSs+y+4D01NgWsJkVSHVF9JJMowsCvWZ2lhz
NXaBtONTzwMjDVxnMaEQgqBMNH7HXWzxqi7twvDCbHYFPyJzInWcCPokpsfQ9/Tc
5n0yPcUuUwDdO1I06CxAdvBU26I9nMIvI353DuhdGRaZdH85isTDgW35T2G3TD3w
ratlmHoIYUe7cjvhJs/6p4R7quBSLT74mqIs00l3mtlyRKhdVGR+Tl3YwCfmUb+F
V/vQo13O04QnC2QOzEAz//PUj1Rm9XXCaiWQHKs8QyVM4opFQADhrKLRQjkqu/3p
KOaJPxJEr2NnTuuFWyfj78k+zV8tMSvfXcRwVPO/ZtXow6CtYtV4h09FK8xdpkJK
rkrQ06Up111sS8uDJrzWRlREBM/JTOIZHkLGF7ZkQK3ICVZPi1vGg8MbQjuM8lnd
Oc95eOn4BTC0lua3L65f/C/UQpSXr+vqKTq+xOsybxnWmLJBcFSWOIqeaLJTblsi
YiZwowlpxoFC/UCEzTsSTRKbjETb590oyJqeg0pchdUT50x9ZiBfo094sdovrKqE
eJDiiDiXWPIB1Cf+ic8iP6T6C0Qsv8zq+GZtyIMZ0ZAkywdUOTMNst8UA9LRstx4
AlvMRfOM9aJhSDmvDk/Nheff9mjIsJYjZ+U09wLRXOJO1Yse4VU=
=h/fM
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Valentine's day edition, with just few fixes because
that's how we love it ;-)
iwlwifi:
- correct A3 in A-MSDUs
- fix crash when operating as AP and running out of station
slots to use
- clear link ID to correct some later checks against it
- fix error codes in SAR table loading
- fix error path in PPAG table read
mac80211:
- reload a pointer after SKB may have changed
(only in certain monitor inject mode scenarios)
* tag 'wireless-2024-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: fix a crash when we run out of stations
wifi: iwlwifi: uninitialized variable in iwl_acpi_get_ppag_table()
wifi: iwlwifi: Fix some error codes
wifi: iwlwifi: clear link_id in time_event
wifi: iwlwifi: mvm: use correct address 3 in A-MSDU
wifi: mac80211: reload info pointer in ieee80211_tx_dequeue()
====================
Link: https://lore.kernel.org/r/20240214184326.132813-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 8f84780b84 ("netfilter: flowtable: allow unidirectional rules")
made unidirectional flow offload possible, while completely ignoring (and
breaking) bidirectional flow offload for nftables.
Add the missing flag that was left out as an exercise for the reader :)
Cc: Vlad Buslov <vladbu@nvidia.com>
Fixes: 8f84780b84 ("netfilter: flowtable: allow unidirectional rules")
Reported-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When a DNAT rule is configured via iptables with different port ranges,
iptables -t nat -A PREROUTING -p tcp -d 10.0.0.2 -m tcp --dport 32000:32010
-j DNAT --to-destination 192.168.0.10:21000-21010
we seem to be DNATing to some random port on the LAN side. While this is
expected if --random is passed to the iptables command, it is not
expected without passing --random. The expected behavior (and the
observed behavior prior to the commit in the "Fixes" tag) is the traffic
will be DNAT'd to 192.168.0.10:21000 unless there is a tuple collision
with that destination. In that case, we expect the traffic to be
instead DNAT'd to 192.168.0.10:21001, so on so forth until the end of
the range.
This patch intends to restore the behavior observed prior to the "Fixes"
tag.
Fixes: 6ed5943f87 ("netfilter: nat: remove l4 protocol port rovers")
Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add missing : in kdoc field names.
Fixes: 8683f4b995 ("nft_set_pipapo: Prepare for vectorised implementation: helpers")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The following 3 locks would race against each other, causing the
deadlock situation in the Syzbot bug report:
- j1939_socks_lock
- active_session_list_lock
- sk_session_queue_lock
A reasonable fix is to change j1939_socks_lock to an rwlock, since in
the rare situations where a write lock is required for the linked list
that j1939_socks_lock is protecting, the code does not attempt to
acquire any more locks. This would break the circular lock dependency,
where, for example, the current thread already locks j1939_socks_lock
and attempts to acquire sk_session_queue_lock, and at the same time,
another thread attempts to acquire j1939_socks_lock while holding
sk_session_queue_lock.
NOTE: This patch along does not fix the unregister_netdevice bug
reported by Syzbot; instead, it solves a deadlock situation to prepare
for one or more further patches to actually fix the Syzbot bug, which
appears to be a reference counting problem within the j1939 codebase.
Reported-by: <syzbot+1591462f226d9cbf0564@syzkaller.appspotmail.com>
Signed-off-by: Ziqi Zhao <astrajoan@yahoo.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20230721162226.8639-1-astrajoan@yahoo.com
[mkl: remove unrelated newline change]
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
dev_base_lock is not needed anymore, all remaining users also hold RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RTNL already protects writes to dev->reg_state, we no longer need to hold
dev_base_lock to protect the readers.
unlist_netdevice() second argument can be removed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We hold RTNL here, and dev->link_mode readers already
are using READ_ONCE().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_base_lock is going away, add netdev_set_operstate() helper
so that hsr does not have to know core internals.
Remove dev_base_lock acquisition from rfc2863_policy()
v3: use an "unsigned int" for dev->operstate,
so that try_cmpxchg() can work on all arches.
( https://lore.kernel.org/oe-kbuild-all/202402081918.OLyGaea3-lkp@intel.com/ )
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_get_stats() can be called from RCU, there is no need
to acquire dev_base_lock.
Change dev_isalive() comment to reflect we no longer use
dev_base_lock from net/core/net-sysfs.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
operstate_show() can omit dev_base_lock acquisition only
to read dev->operstate.
Annotate accesses to dev->operstate.
Writers still acquire dev_base_lock for mutual exclusion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using dev_base_lock is not preventing from reading garbage.
Use dev_addr_sem instead.
v4: place dev_addr_sem extern in net/core/dev.h (Jakub Kicinski)
Link: https://lore.kernel.org/netdev/20240212175845.10f6680a@kernel.org/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make clear dev_isalive() can be called with RCU protection.
Then convert netdev_show() to RCU, to remove dev_base_lock
dependency.
Also add RCU to broadcast_show().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepares things so that dev->reg_state reads can be lockless,
by adding WRITE_ONCE() on write side.
READ_ONCE()/WRITE_ONCE() do not support bitfields.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following patch will read dev->link locklessly,
annotate the write from do_setlink().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
t->parms.link is read locklessly, annotate these reads
and opposite writes accordingly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
name_assign_type_show() runs locklessly, we should annotate
accesses to dev->name_assign_type.
Alternative would be to grab devnet_rename_sem semaphore
from name_assign_type_show(), but this would not bring
more accuracy.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 67f562e3e1 ("net/smc: transfer fasync_list in case of fallback")
leaves the socket's fasync list pointer within a container socket as well.
When the latter is destroyed, '__sock_release()' warns about its non-empty
fasync list, which is a dangling pointer to previously freed fasync list
of an underlying TCP socket. Fix this spurious warning by nullifying
fasync list of a container socket.
Fixes: 67f562e3e1 ("net/smc: transfer fasync_list in case of fallback")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmXLUSQTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28b6VMB/0eqFcC233/c60/7iEbxXTGG52qs4mc
4LeTs57+4Msfibq7M81ZzBuZoMqFluFELunYT5gDPXgnSn4AWXyCv9ciYCW8vort
Z/2wcSNUMdOIbmKZhdc96gnqXuE6fNMx/eYTsn34HBkMkM7BfxZSIH3pZsys+eGw
JrVwhT2aBVKG5ji4YPZF/RuqHwuM00GLMs9G9GR6yw9JiCwI1n+Jjru/6zwJprpi
NAyLhJGgvgp+twLID2jH2Gy6Mqs/ZrXMyxPMqycbYOtZ4oQJOfTkg1SXzT/J3GsY
VFWvhGWrADSx7CnISuS9VXsoWpe5nZ7yMhFBOtKME3Gh3qmhQegPIMY3
=w4J5
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.9-20240213' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
linux-can-next-for-6.9-20240213
this is a pull request of 23 patches for net-next/master.
The first patch is by Nicolas Maier and targets the CAN Broadcast
Manager (bcm), it adds message flags to distinguish between own local
and remote traffic.
Oliver Hartkopp contributes a patch for the CAN ISOTP protocol that
adds dynamic flow control parameters.
Stefan Mätje's patch series add support for the esd PCIe/402 CAN
interface family.
Markus Schneider-Pargmann contributes 14 patches for the m_can to
optimize for the SPI attached tcan4x5x controller.
A patch by Vincent Mailhol replaces Wolfgang Grandegger by Vincent
Mailhol as the CAN drivers Co-Maintainer.
Jimmy Assarsson's patch add support for the Kvaser M.2 PCIe 4xCAN
adapter.
A patch by Daniil Dulov removed a redundant NULL check in the softing
driver.
Oliver Hartkopp contributes a patch to add CANXL virtual CAN network
identifier support.
A patch by myself removes Naga Sureshkumar Relli as the maintainer of
the xilinx_can driver, as their email bounces.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to native xdp, do not always linearize the skb in
netif_receive_generic_xdp routine but create a non-linear xdp_buff to be
processed by the eBPF program. This allow to add multi-buffer support
for xdp running in generic mode.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/1044d6412b1c3e95b40d34993fd5f37cd2f319fd.1707729884.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rely on skb pointer reference instead of the skb pointer in do_xdp_generic
and netif_receive_generic_xdp routine signatures.
This is a preliminary patch to add multi-buff support for xdp running in
generic mode where we will need to reallocate the skb to avoid
linearization and we will need to make it visible to do_xdp_generic()
caller.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c09415b1f48c8620ef4d76deed35050a7bddf7c2.1707729884.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce generic percpu page_pools allocator.
Moreover add page_pool_create_percpu() and cpuid filed in page_pool struct
in order to recycle the page in the page_pool "hot" cache if
napi_pp_put_page() is running on the same cpu.
This is a preliminary patch to add xdp multi-buff support for xdp running
in generic mode.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/80bc4285228b6f4220cd03de1999d86e46e3fcbd.1707729884.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
br_set_lockdep_class() is missing many details.
Use generic netdev_lockdep_set_classes() to not worry anymore.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240212140700.2795436-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vlan uses vlan_dev_set_lockdep_class() which lacks qdisc_tx_busylock
initialization.
Use generic netdev_lockdep_set_classes() to not worry anymore.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240212140700.2795436-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adopt net->dev_by_index as I did in commit 0e0939c0ad
("net-procfs: use xarray iterator to implement /proc/net/dev")
Not only this removes quadratic behavior, it also makes sure
an existing vlan device is always visible in the dump,
regardless of concurrent net->dev_base_head changes.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240211214404.1882191-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xsk_build_skb() allocates a page and adds it to the skb via
skb_add_rx_frag() and specifies 0 for truesize. This leads to a warning
in skb_add_rx_frag() with CONFIG_DEBUG_NET enabled because size is
larger than truesize.
Increasing truesize requires to add the same amount to socket's
sk_wmem_alloc counter in order not to underflow the counter during
release in the destructor (sock_wfree()).
Pass the size of the allocated page as truesize to skb_add_rx_frag().
Add this mount to socket's sk_wmem_alloc counter.
Fixes: cf24f5a5fe ("xsk: add support for AF_XDP multi-buffer on Tx path")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20240202163221.2488589-1-bigeasy@linutronix.de
The prologue to codel is using BSD-3 clause and GPL-2 boiler plate
language. Replace it by using SPDX. The automated treewide scan in
commit d2912cb15b ("treewide: Replace GPLv2 boilerplate/reference with
SPDX - rule 500") did not pickup dual licensed code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Dave Taht <dave.taht@gmail.com>
Link: https://lore.kernel.org/r/20240211172532.6568-1-stephen@networkplumber.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
CAN XL data frames contain an 8-bit virtual CAN network identifier (VCID).
A VCID value of zero represents an 'untagged' CAN XL frame.
To receive and send these optional VCIDs via CAN_RAW sockets a new socket
option CAN_RAW_XL_VCID_OPTS is introduced to define/access VCID content:
- tx: set the outgoing VCID value by the kernel (one fixed 8-bit value)
- tx: pass through VCID values from the user space (e.g. for traffic replay)
- rx: apply VCID receive filter (value/mask) to be passed to the user space
With the 'tx pass through' option CAN_RAW_XL_VCID_TX_PASS all valid VCID
values can be sent, e.g. to replay full qualified CAN XL traffic.
The VCID value provided for the CAN_RAW_XL_VCID_TX_SET option will
override the VCID value in the struct canxl_frame.prio defined for
CAN_RAW_XL_VCID_TX_PASS when both flags are set.
With a rx_vcid_mask of zero all possible VCID values (0x00 - 0xFF) are
passed to the user space when the CAN_RAW_XL_VCID_RX_FILTER flag is set.
Without this flag only untagged CAN XL frames (VCID = 0x00) are delivered
to the user space (default).
The 8-bit VCID is stored inside the CAN XL prio element (only in CAN XL
frames!) to not interfere with other CAN content or the CAN filters
provided by the CAN_RAW sockets and kernel infrastruture.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20240212213550.18516-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
After this commit ba24ea1291 ("net/sched: Retire ipt action")
NET_ACT_IPT is not needed anymore as the action is retired and the code
is removed.
Clean the Kconfig part as well.
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240209180656.867546-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>