Do not allow populating the same page twice with startup data. In the
case of SEV-SNP, for example, the firmware does not allow it anyway,
since the launch-update operation is only possible on pages that are
still shared in the RMP.
Even if it worked, kvm_gmem_populate()'s callback is meant to have side
effects such as updating launch measurements, and updating the same
page twice is unlikely to have the desired results.
Races between calls to the ioctl are not possible because
kvm_gmem_populate() holds slots_lock and the VM should not be running.
But again, even if this worked on other confidential computing technology,
it doesn't matter to guest_memfd.c whether this is something fishy
such as missing synchronization in userspace, or rather something
intentional. One of the racers wins, and the page is initialized by
either kvm_gmem_prepare_folio() or kvm_gmem_populate().
Anyway, out of paranoia, adjust sev_gmem_post_populate() anyway to use
the same errno that kvm_gmem_populate() is using.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is enough to return 0 if a guest need not do any preparation.
This is in fact how sev_gmem_prepare() works for non-SNP guests,
and it extends naturally to Intel hosts: the x86 callback for
gmem_prepare is optional and returns 0 if not defined.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is now possible because preparation is done by kvm_gmem_get_pfn()
instead of fallocate(). In practice this is not a limitation, because
even though guest_memfd can be bound to multiple struct kvm, for
hardware implementations of confidential computing only one guest
(identified by an ASID on SEV-SNP, or an HKID on TDX) will be able
to access it.
In the case of intra-host migration (not implemented yet for SEV-SNP,
but we can use SEV-ES as an idea of how it will work), the new struct
kvm inherits the same ASID and preparation need not be repeated.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initializing the contents of the folio on fallocate() is unnecessarily
restrictive. It means that the page is registered with the firmware and
then it cannot be touched anymore. In particular, this loses the
possibility of using fallocate() to pre-allocate the page for SEV-SNP
guests, because kvm_arch_gmem_prepare() then fails.
It's only when the guest actually accesses the page (and therefore
kvm_gmem_get_pfn() is called) that the page must be cleared from any
stale host data and registered with the firmware. The up-to-date flag
is clear if this has to be done (i.e. it is the first access and
kvm_gmem_populate() has not been called).
All in all, there are enough differences between kvm_gmem_get_pfn() and
kvm_gmem_populate(), that it's better to separate the two flows completely.
Extract the bulk of kvm_gmem_get_folio(), which take a folio and end up
setting its up-to-date flag, to a new function kvm_gmem_prepare_folio();
these are now done only by the non-__-prefixed kvm_gmem_get_pfn().
As a bonus, __kvm_gmem_get_pfn() loses its ugly "bool prepare" argument.
One difference is that fallocate(PUNCH_HOLE) can now race with a
page fault. Potentially this causes a page to be prepared and into the
filemap even after fallocate(PUNCH_HOLE). This is harmless, as it can be
fixed by another hole punching operation, and can be avoided by clearing
the private-page attribute prior to invoking fallocate(PUNCH_HOLE).
This way, the page fault will cause an exit to user space.
The previous semantics, where fallocate() could be used to prepare
the pages in advance of running the guest, can be accessed with
KVM_PRE_FAULT_MEMORY.
For now, accessing a page in one VM will attempt to call
kvm_arch_gmem_prepare() in all of those that have bound the guest_memfd.
Cleaning this up is left to a separate patch.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow testing the up-to-date flag in the caller without taking the
lock again.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add "ARCH" to the symbols; shortly, the "prepare" phase will include both
the arch-independent step to clear out contents left in the page by the
host, and the arch-dependent step enabled by CONFIG_HAVE_KVM_GMEM_PREPARE.
For consistency do the same for CONFIG_HAVE_KVM_GMEM_INVALIDATE as well.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have a perfectly usable folio, use it to retrieve the pfn and order.
All that's needed is a version of folio_file_page that returns a pfn.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The up-to-date flag as is now is not too useful; it tells guest_memfd not
to overwrite the contents of a folio, but it doesn't say that the page
is ready to be mapped into the guest. For encrypted guests, mapping
a private page requires that the "preparation" phase has succeeded,
and at the same time the same page cannot be prepared twice.
So, ensure that folio_mark_uptodate() is only called on a prepared page. If
kvm_gmem_prepare_folio() or the post_populate callback fail, the folio
will not be marked up-to-date; it's not a problem to call clear_highpage()
again on such a page prior to the next preparation attempt.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now this is simply more consistent and avoids use of pfn_to_page()
and put_page(). It will be put to more use in upcoming patches, to
ensure that the up-to-date flag is set at the very end of both the
kvm_gmem_get_pfn() and kvm_gmem_populate() flows.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
-----BEGIN PGP SIGNATURE-----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=BalU
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
Fix a bug where KVM fails to check the validity of an incoming userspace
virtual address and tries to activate a gfn_to_pfn_cache with a kernel address.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEKTobbabEP7vbhhN9OlYIJqCjN/0FAmaRtxMACgkQOlYIJqCj
N/0B9A/+PeiWgW+AZ5Bl3YLLTMUi2Q1pKapT5hdNAthdDC72ewDDqtfXQ/Lcaubq
j1ElrxXP5IjMBq7U65hT9hc/f6AxZat2LkTSBRM7uGrhE2UTF+/GmfJve8vUHZsA
XtH9JRqNhBfr5EOkyh4AwvzvmzaiuJemPeLtQuEwlgaECs9byG1ILhudD/KiVStw
3Tw4Zw2oKzpo3hiW+5/YZBEkpO+CM50ByP9/SEPUhnG8sCqlGzMEI27bOvDgEDQs
vV2fIj992lrSa9OX6oA/xz3/UE1t3ruo8mHjP/r3+sxr1SnnwbmR0YbiGEVdAjJI
Pllwx6E9Fxi8Nqq/6Dy4XxUhNG+G8+ozwvr8wbLHzXFIpCGZFN5xgweuHtdEg0x8
mNxekTZrsLE58t5MpvTUMMHiHsn0KqtPqg1g3c2A7znZnzYxMHrIYyUm+uEOIZ/w
Q93WT7s3SiaELgENsx3uda3Q0i2gKK3x7gbLk/9N2ciFZXgFZMwdZa7FivJr5OoT
wp8r/btKTTaVGyn3x3y/Tum5XpyMNsKdxEKQ4n3aaIkfS2APfiHjQFyzkI2uLePG
Tz/SZ/PT2rxpRuYL54mHzovPsIJ3NqBA+OTWCHKI/EwyWeyW9g05rZnmJar4ZYQ5
pdHqWgGi0wMrPWG+GQv0FMBj7EIM4Z3dA4/BRyRObnMmp1XtIb4=
=Vgz5
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.10-11' of https://github.com/kvm-x86/linux into HEAD
KVM Xen:
Fix a bug where KVM fails to check the validity of an incoming userspace
virtual address and tries to activate a gfn_to_pfn_cache with a kernel address.
1. Add ParaVirt steal time support.
2. Add some VM migration enhancement.
3. Add perf kvm-stat support for loongarch.
-----BEGIN PGP SIGNATURE-----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=DpIK
-----END PGP SIGNATURE-----
Merge tag 'loongarch-kvm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.11
1. Add ParaVirt steal time support.
2. Add some VM migration enhancement.
3. Add perf kvm-stat support for loongarch.
Pre-population has been requested several times to mitigate KVM page faults
during guest boot or after live migration. It is also required by TDX
before filling in the initial guest memory with measured contents.
Introduce it as a generic API.
Add a new ioctl KVM_PRE_FAULT_MEMORY in the KVM common code. It iterates on the
memory range and calls the arch-specific function. The implementation is
optional and enabled by a Kconfig symbol.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <819322b8f25971f2b9933bfa4506e618508ad782.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The flags AS_UNMOVABLE and AS_INACCESSIBLE were both added just for guest_memfd;
AS_UNMOVABLE is already in existing versions of Linux, while AS_INACCESSIBLE was
acked for inclusion in 6.11.
But really, they are the same thing: only guest_memfd uses them, at least for
now, and guest_memfd pages are unmovable because they should not be
accessed by the CPU.
So merge them into one; use the AS_INACCESSIBLE name which is more comprehensive.
At the same time, this fixes an embarrassing bug where AS_INACCESSIBLE was used
as a bit mask, despite it being just a bit index.
The bug was mostly benign, because AS_INACCESSIBLE's bit representation (1010)
corresponded to setting AS_UNEVICTABLE (which is already set) and AS_ENOSPC
(except no async writes can happen on the guest_memfd). So the AS_INACCESSIBLE
flag simply had no effect.
Fixes: 1d23040caa ("KVM: guest_memfd: Use AS_INACCESSIBLE when creating guest_memfd inode")
Fixes: c72ceafbd1 ("mm: Introduce AS_INACCESSIBLE for encrypted/confidential memory")
Cc: linux-mm@kvack.org
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a module description for kvm.ko to fix a 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/kvm/kvm.o
Opportunistically update kvm_main.c's comically stale file comment to
match the module description.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240622-md-kvm-v2-1-29a60f7c48b1@quicinc.com
[sean: split x86 changes to a separate commit, remove stale VT-x comment]
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using GuestMaxPhyAddr
from KVM's supported CPUID (if it's available).
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are atomic.
- Fix technically benign bug in __kvm_handle_hva_range() where KVM consumes
the return from a void-returning function as if it were a boolean.
-----BEGIN PGP SIGNATURE-----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=Qdo9
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.10-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM fixes for 6.10
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using GuestMaxPhyAddr
from KVM's supported CPUID (if it's available).
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are atomic.
- Fix technically benign bug in __kvm_handle_hva_range() where KVM consumes
the return from a void-returning function as if it were a boolean.
kvm_gmem_populate() is a potentially lengthy operation that can involve
multiple calls to the firmware. Interrupt it if a signal arrives.
Fixes: 1f6c06b177 ("KVM: guest_memfd: Add interface for populating gmem pages with user data")
Cc: Isaku Yamahata <isaku.yamahata@intel.com>
Cc: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Function kvm_reset_dirty_gfn may be called with parameters cur_slot /
cur_offset / mask are all zero, it does not represent real dirty page.
It is not necessary to clear dirty page in this condition. Also return
value of macro __fls() is undefined if mask is zero which is called in
funciton kvm_reset_dirty_gfn(). Here just return.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20240613122803.1031511-1-maobibo@loongson.cn>
[Move the conditional inside kvm_reset_dirty_gfn; suggested by
Sean Christopherson. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If kvm_gmem_get_pfn() detects an hwpoisoned page, it returns -EHWPOISON
but it does not put back the reference that kvm_gmem_get_folio() had
grabbed. Add the forgotten folio_put().
Fixes: a7800aa80e ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
Cc: stable@vger.kernel.org
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some allocations done by KVM are temporary, they are created as result
of program actions, but can't exists for arbitrary long times.
They should have been GFP_TEMPORARY (rip!).
OTOH, kvm-nx-lpage-recovery and kvm-pit kernel threads exist for as long
as VM exists but their task_struct memory is not accounted.
This is story for another day.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Message-ID: <c0122f66-f428-417e-a360-b25fc0f154a0@p183>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mark a vCPU as preempted/ready if-and-only-if it's scheduled out while
running. i.e. Do not mark a vCPU preempted/ready if it's scheduled out
during a non-KVM_RUN ioctl() or when userspace is doing KVM_RUN with
immediate_exit.
Commit 54aa83c901 ("KVM: x86: do not set st->preempted when going back
to user space") stopped marking a vCPU as preempted when returning to
userspace, but if userspace then invokes a KVM vCPU ioctl() that gets
preempted, the vCPU will be marked preempted/ready. This is arguably
incorrect behavior since the vCPU was not actually preempted while the
guest was running, it was preempted while doing something on behalf of
userspace.
Marking a vCPU preempted iff its running also avoids KVM dirtying guest
memory after userspace has paused vCPUs, e.g. for live migration, which
allows userspace to collect the final dirty bitmap before or in parallel
with saving vCPU state, without having to worry about saving vCPU state
triggering writes to guest memory.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240503181734.1467938-4-dmatlack@google.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Ensure that any new KVM code that references immediate_exit gets extra
scrutiny by renaming it to immediate_exit__unsafe in kernel code.
All fields in struct kvm_run are subject to TOCTOU races since they are
mapped into userspace, which may be malicious or buggy. To protect KVM,
introduces a new macro that appends __unsafe to select field names in
struct kvm_run, hinting to developers and reviewers that accessing such
fields must be done carefully.
Apply the new macro to immediate_exit, since userspace can make
immediate_exit inconsistent with vcpu->wants_to_run, i.e. accessing
immediate_exit directly could lead to unexpected bugs in the future.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240503181734.1467938-3-dmatlack@google.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Introduce vcpu->wants_to_run to indicate when a vCPU is in its core run
loop, i.e. when the vCPU is running the KVM_RUN ioctl and immediate_exit
was not set.
Replace all references to vcpu->run->immediate_exit with
!vcpu->wants_to_run to avoid TOCTOU races with userspace. For example, a
malicious userspace could invoked KVM_RUN with immediate_exit=true and
then after KVM reads it to set wants_to_run=false, flip it to false.
This would result in the vCPU running in KVM_RUN with
wants_to_run=false. This wouldn't cause any real bugs today but is a
dangerous landmine.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240503181734.1467938-2-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If, on a 64 bit system, a vCPU ID is provided that has the upper 32 bits
set to a non-zero value, it may get accepted if the truncated to 32 bits
integer value is below KVM_MAX_VCPU_IDS and 'max_vcpus'. This feels very
wrong and triggered the reporting logic of PaX's SIZE_OVERFLOW plugin.
Instead of silently truncating and accepting such values, pass the full
value to kvm_vm_ioctl_create_vcpu() and make the existing limit checks
return an error.
Even if this is a userland ABI breaking change, no sane userland could
have ever relied on that behaviour.
Reported-by: PaX's SIZE_OVERFLOW plugin running on grsecurity's syzkaller
Fixes: 6aa8b732ca ("[PATCH] kvm: userspace interface")
Cc: Emese Revfy <re.emese@gmail.com>
Cc: PaX Team <pageexec@freemail.hu>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240614202859.3597745-2-minipli@grsecurity.net
[sean: tweak comment about INT_MAX assertion]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Bail from outer address space loop, not just the inner memslot loop, when
a "null" handler is encountered by __kvm_handle_hva_range(), which is the
intended behavior. On x86, which has multiple address spaces thanks to
SMM emulation, breaking from just the memslot loop results in undefined
behavior due to assigning the non-existent return value from kvm_null_fn()
to a bool.
In practice, the bug is benign as kvm_mmu_notifier_invalidate_range_end()
is the only caller that passes handler=kvm_null_fn, and it doesn't set
flush_on_ret, i.e. assigning garbage to r.ret is ultimately ignored. And
for most configuration the compiler elides the entire sequence, i.e. there
is no undefined behavior at runtime.
------------[ cut here ]------------
UBSAN: invalid-load in arch/x86/kvm/../../../virt/kvm/kvm_main.c:655:10
load of value 160 is not a valid value for type '_Bool'
CPU: 370 PID: 8246 Comm: CPU 0/KVM Not tainted 6.8.2-amdsos-build58-ubuntu-22.04+ #1
Hardware name: AMD Corporation Sh54p/Sh54p, BIOS WPC4429N 04/25/2024
Call Trace:
<TASK>
dump_stack_lvl+0x48/0x60
ubsan_epilogue+0x5/0x30
__ubsan_handle_load_invalid_value+0x79/0x80
kvm_mmu_notifier_invalidate_range_end.cold+0x18/0x4f [kvm]
__mmu_notifier_invalidate_range_end+0x63/0xe0
__split_huge_pmd+0x367/0xfc0
do_huge_pmd_wp_page+0x1cc/0x380
__handle_mm_fault+0x8ee/0xe50
handle_mm_fault+0xe4/0x4a0
__get_user_pages+0x190/0x840
get_user_pages_unlocked+0xe0/0x590
hva_to_pfn+0x114/0x550 [kvm]
kvm_faultin_pfn+0xed/0x5b0 [kvm]
kvm_tdp_page_fault+0x123/0x170 [kvm]
kvm_mmu_page_fault+0x244/0xaa0 [kvm]
vcpu_enter_guest+0x592/0x1070 [kvm]
kvm_arch_vcpu_ioctl_run+0x145/0x8a0 [kvm]
kvm_vcpu_ioctl+0x288/0x6d0 [kvm]
__x64_sys_ioctl+0x8f/0xd0
do_syscall_64+0x77/0x120
entry_SYSCALL_64_after_hwframe+0x6e/0x76
</TASK>
---[ end trace ]---
Fixes: 071064f14d ("KVM: Don't take mmu_lock for range invalidation unless necessary")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/b8723d39903b64c241c50f5513f804390c7b5eec.1718203311.git.babu.moger@amd.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
The error path for OOM when allocating buses used to return -ENOMEM using
the local variable 'r', where 'r' was initialized at the top of the
function. But a new "r = kvm_init_irq_routing(kvm);" was introduced in
the middle of the function, so now the error code is not set and it
eventually leads to a NULL dereference due to kvm_dev_ioctl_create_vm()
thinking kvm_create_vm() succeeded. Set the error code back to -ENOMEM.
Opportunistically tweak the logic to pre-set "r = -ENOMEM" immediately
before the flows that can fail due to memory allocation failure to make
it less likely that the bug recurs in the future.
Fixes: fbe4a7e881 ("KVM: Setup empty IRQ routing when creating a VM")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/02051e0a-09d8-49a2-917f-7c2f278a1ba1@moroto.mountain
[sean: tweak all of the "r = -ENOMEM" sites, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Delete kvm_arch_sched_in() now that all implementations are nops.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240522014013.1672962-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a kvm_vcpu.scheduled_out flag to track if a vCPU is in the process of
being scheduled out (vCPU put path), or if the vCPU is being reloaded
after being scheduled out (vCPU load path). In the short term, this will
allow dropping kvm_arch_sched_in(), as arch code can query scheduled_out
during kvm_arch_vcpu_load().
Longer term, scheduled_out opens up other potential optimizations, without
creating subtle/brittle dependencies. E.g. it allows KVM to keep guest
state (that is managed via kvm_arch_vcpu_{load,put}()) loaded across
kvm_sched_{out,in}(), if KVM knows the state isn't accessed by the host
kernel. Forcing arch code to coordinate between kvm_arch_sched_{in,out}()
and kvm_arch_vcpu_{load,put}() is awkward, not reusable, and relies on the
exact ordering of calls into arch code.
Adding scheduled_out also obviates the need for a kvm_arch_sched_out()
hook, e.g. if arch code needs to do something novel when putting vCPU
state.
And even if KVM never uses scheduled_out for anything beyond dropping
kvm_arch_sched_in(), just being able to remove all of the arch stubs makes
it worth adding the flag.
Link: https://lore.kernel.org/all/20240430224431.490139-1-seanjc@google.com
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240522014013.1672962-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Setup empty IRQ routing during VM creation so that x86 and s390 don't need
to set empty/dummy IRQ routing during KVM_CREATE_IRQCHIP (in future
patches). Initializing IRQ routing before there are any potential readers
allows KVM to avoid the synchronize_srcu() in kvm_set_irq_routing(), which
can introduces 20+ milliseconds of latency in the VM creation path.
Ensuring that all VMs have non-NULL IRQ routing also hardens KVM against
misbehaving userspace VMMs, e.g. RISC-V dynamically instantiates its
interrupt controller, but doesn't override kvm_arch_intc_initialized() or
kvm_arch_irqfd_allowed(), and so can likely reach kvm_irq_map_gsi()
without fully initialized IRQ routing.
Signed-off-by: Yi Wang <foxywang@tencent.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20240506101751.3145407-2-foxywang@tencent.com
[sean: init refcount after IRQ routing, fix stub, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use {READ,WRITE}_ONCE() to access kvm->last_boosted_vcpu to ensure the
loads and stores are atomic. In the extremely unlikely scenario the
compiler tears the stores, it's theoretically possible for KVM to attempt
to get a vCPU using an out-of-bounds index, e.g. if the write is split
into multiple 8-bit stores, and is paired with a 32-bit load on a VM with
257 vCPUs:
CPU0 CPU1
last_boosted_vcpu = 0xff;
(last_boosted_vcpu = 0x100)
last_boosted_vcpu[15:8] = 0x01;
i = (last_boosted_vcpu = 0x1ff)
last_boosted_vcpu[7:0] = 0x00;
vcpu = kvm->vcpu_array[0x1ff];
As detected by KCSAN:
BUG: KCSAN: data-race in kvm_vcpu_on_spin [kvm] / kvm_vcpu_on_spin [kvm]
write to 0xffffc90025a92344 of 4 bytes by task 4340 on cpu 16:
kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4112) kvm
handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel
vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:?
arch/x86/kvm/vmx/vmx.c:6606) kvm_intel
vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm
kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm
kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm
__se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890)
__x64_sys_ioctl (fs/ioctl.c:890)
x64_sys_call (arch/x86/entry/syscall_64.c:33)
do_syscall_64 (arch/x86/entry/common.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
read to 0xffffc90025a92344 of 4 bytes by task 4342 on cpu 4:
kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4069) kvm
handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel
vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:?
arch/x86/kvm/vmx/vmx.c:6606) kvm_intel
vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm
kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm
kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm
__se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890)
__x64_sys_ioctl (fs/ioctl.c:890)
x64_sys_call (arch/x86/entry/syscall_64.c:33)
do_syscall_64 (arch/x86/entry/common.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
value changed: 0x00000012 -> 0x00000000
Fixes: 217ece6129 ("KVM: use yield_to instead of sleep in kvm_vcpu_on_spin")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240510092353.2261824-1-leitao@debian.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull base x86 KVM support for running SEV-SNP guests from Michael Roth:
* add some basic infrastructure and introduces a new KVM_X86_SNP_VM
vm_type to handle differences versus the existing KVM_X86_SEV_VM and
KVM_X86_SEV_ES_VM types.
* implement the KVM API to handle the creation of a cryptographic
launch context, encrypt/measure the initial image into guest memory,
and finalize it before launching it.
* implement handling for various guest-generated events such as page
state changes, onlining of additional vCPUs, etc.
* implement the gmem/mmu hooks needed to prepare gmem-allocated pages
before mapping them into guest private memory ranges as well as
cleaning them up prior to returning them to the host for use as
normal memory. Because those cleanup hooks supplant certain
activities like issuing WBINVDs during KVM MMU invalidations, avoid
duplicating that work to avoid unecessary overhead.
This merge leaves out support support for attestation guest requests
and for loading the signing keys to be used for attestation requests.
Now that KVM does NOT gift async #PF workers a "struct kvm" reference,
don't bother skipping "done" workers when flushing/canceling queued
workers, as the deadlock that was being fudged around can no longer occur.
When workers, i.e. async_pf_execute(), were gifted a referenced, it was
possible for a worker to put the last reference and trigger VM destruction,
i.e. trigger flushing of a workqueue from a worker in said workqueue.
Note, there is no actual lock, the deadlock was that a worker will be
stuck waiting for itself (the workqueue code simulates a lock/unlock via
lock_map_{acquire,release}()).
Skipping "done" workers isn't problematic per se, but using work->vcpu as
a "done" flag is confusing, e.g. it's not clear that async_pf.lock is
acquired to protect the work->vcpu, NOT the processing of async_pf.queue
(which is protected by vcpu->mutex).
This reverts commit 22583f0d9c.
Suggested-by: Xu Yilun <yilun.xu@linux.intel.com>
Link: https://lore.kernel.org/r/20240423191649.2885257-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Default halt_poll_ns_shrink value of 0 always resets polling interval
to 0 on an un-successful poll where vcpu wakeup is not received. This is
mostly to avoid pointless polling for more number of shorter intervals. But
disabled shrink assumes vcpu wakeup is less likely to be received in
subsequent shorter polling intervals. Another side effect of 0 shrink value
is that, even on a successful poll if total block time was greater than
current polling interval, the polling interval starts over from 0 instead
of shrinking by a factor.
Enabling shrink with value of 2 allows the polling interval to gradually
decrement in case of un-successful poll events as well. This gives a fair
chance for successful polling events in subsequent polling intervals rather
than resetting it to 0 and starting over from grow_start.
Below kvm stat log snippet shows interleaved growth and shrinking of
polling interval:
87162647182125: kvm_halt_poll_ns: vcpu 0: halt_poll_ns 10000 (grow 0)
87162647637763: kvm_halt_poll_ns: vcpu 0: halt_poll_ns 20000 (grow 10000)
87162649627943: kvm_halt_poll_ns: vcpu 0: halt_poll_ns 40000 (grow 20000)
87162650892407: kvm_halt_poll_ns: vcpu 0: halt_poll_ns 20000 (shrink 40000)
87162651540378: kvm_halt_poll_ns: vcpu 0: halt_poll_ns 40000 (grow 20000)
87162652276768: kvm_halt_poll_ns: vcpu 0: halt_poll_ns 20000 (shrink 40000)
87162652515037: kvm_halt_poll_ns: vcpu 0: halt_poll_ns 40000 (grow 20000)
87162653383787: kvm_halt_poll_ns: vcpu 0: halt_poll_ns 20000 (shrink 40000)
87162653627670: kvm_halt_poll_ns: vcpu 0: halt_poll_ns 10000 (shrink 20000)
87162653796321: kvm_halt_poll_ns: vcpu 0: halt_poll_ns 20000 (grow 10000)
87162656171645: kvm_halt_poll_ns: vcpu 0: halt_poll_ns 10000 (shrink 20000)
87162661607487: kvm_halt_poll_ns: vcpu 0: halt_poll_ns 0 (shrink 10000)
Having both grow and shrink enabled creates a balance in polling interval
growth and shrink behavior. Tests show improved successful polling attempt
ratio which contribute to VM performance. Power penalty is quite negligible
as shrunk polling intervals create bursts of very short durations.
Performance assessment results show 3-6% improvements in CPU+GPU, Memory
and Storage Android VM workloads whereas 5-9% improvement in average FPS of
gaming VM workloads.
Power penalty is below 1% where host OS is either idle or running a
native workload having 2 VMs enabled. CPU/GPU intensive gaming workloads
as well do not show any increased power overhead with shrink enabled.
Co-developed-by: Rajendran Jaishankar <jaishankar.rajendran@intel.com>
Signed-off-by: Rajendran Jaishankar <jaishankar.rajendran@intel.com>
Signed-off-by: Parshuram Sangle <parshuram.sangle@intel.com>
Link: https://lore.kernel.org/r/20231102154628.2120-2-parshuram.sangle@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
After
faf01aef05 ("KVM: PPC: Merge powerpc's debugfs entry content into generic entry")
kvm_debugfs_dir is not used anywhere else outside of kvm_main.c
Unexport it and make it static.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240515150804.9354-1-bp@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
documented (hopefully adequately) in the respective changelogs. Notable
series include:
- Lucas Stach has provided some page-mapping
cleanup/consolidation/maintainability work in the series "mm/treewide:
Remove pXd_huge() API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one
test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being allocated:
number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in largely
similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene" Johannes
Weiner has fixed the page allocator's handling of migratetype requests,
with resulting improvements in compaction efficiency.
- In the series "make the hugetlb migration strategy consistent" Baolin
Wang has fixed a hugetlb migration issue, which should improve hugetlb
allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when memory
almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting" Kairui
Song has optimized pagecache insertion, yielding ~10% performance
improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various page->flags
cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb
functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series
"mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs. This
is a simple first-cut implementation for now. The series is "support
multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in the
series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts in
the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call it
GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to
use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes
the initialization code so that migration between different memory types
works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant driver
in the series "mm: follow_pte() improvements and acrn follow_pte()
fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to folio
in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size THP's
in the series "mm: add per-order mTHP alloc and swpout counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled
and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His series
"mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes
the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback instrumentation
in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series "Fix
and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the
series "Improve anon_vma scalability for anon VMAs". Intel's test bot
reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkgQYwAKCRDdBJ7gKXxA
jrdKAP9WVJdpEcXxpoub/vVE0UWGtffr8foifi9bCwrQrGh5mgEAx7Yf0+d/oBZB
nvA4E0DcPrUAFy144FNM0NTCb7u9vAw=
=V3R/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
This will handle the RMP table updates needed to put a page into a
private state before mapping it into an SEV-SNP guest.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501085210.2213060-14-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID field, which
is unused by hardware, so that KVM can communicate its inability to map GPAs
that set bits 51:48 due to lack of 5-level paging. Guest firmware is
expected to use the information to safely remap BARs in the uppermost GPA
space, i.e to avoid placing a BAR at a legal, but unmappable, GPA.
- Use vfree() instead of kvfree() for allocations that always use vcalloc()
or __vcalloc().
- Don't completely ignore same-value writes to immutable feature MSRs, as
doing so results in KVM failing to reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- Don't mark APICv as being inhibited due to ABSENT if APICv is disabled
KVM-wide to avoid confusing debuggers (KVM will never bother clearing the
ABSENT inhibit, even if userspace enables in-kernel local APIC).
-----BEGIN PGP SIGNATURE-----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=9RXP
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.10:
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID field, which
is unused by hardware, so that KVM can communicate its inability to map GPAs
that set bits 51:48 due to lack of 5-level paging. Guest firmware is
expected to use the information to safely remap BARs in the uppermost GPA
space, i.e to avoid placing a BAR at a legal, but unmappable, GPA.
- Use vfree() instead of kvfree() for allocations that always use vcalloc()
or __vcalloc().
- Don't completely ignore same-value writes to immutable feature MSRs, as
doing so results in KVM failing to reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- Don't mark APICv as being inhibited due to ABSENT if APICv is disabled
KVM-wide to avoid confusing debuggers (KVM will never bother clearing the
ABSENT inhibit, even if userspace enables in-kernel local APIC).
- Misc cleanups extracted from the "exit on missing userspace mapping" series,
which has been put on hold in anticipation of a "KVM Userfault" approach,
which should provide a superset of functionality.
- Remove kvm_make_all_cpus_request_except(), which got added to hack around an
AVIC bug, and then became dead code when a more robust fix came along.
- Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEKTobbabEP7vbhhN9OlYIJqCjN/0FAmY+oHQACgkQOlYIJqCj
N/3c/w//dmgqxFGpPoCvZ2+pVarrbpsMdfO5skaMF0EN1a0Rb0oJcVYj7z1zqsjQ
4DCCANxVrcEGVBZG5I8nhk1lDlGS7zOTOBBovgVDNj7wL9p/fzOhR6UlLKG5QMMn
0nWY9raC8ubcrtKgOm/qOtSgZrL9rEWh3QUK1FRPKaF12r1CLPmJIvVvpCm8t//f
YZrqpHj/JqXbc8V8toBHqvi3DaMIOA2gWRvjfwSWfCL+x7ZPYny3Q+nw9fl2fSR6
f6w1lB6VhyDudzscu4l7U4y5wI0LMmYhJ5p5tvQBB5qtbAJ7vpIUxxYh4CT/YdbH
WLQCIBr2wR0Mkl0g4FwNlnnt6a5Sa6V4nVKfzkl37L0Ucyu+SpP8t6YO4nb/dJmb
Sicx3qqeHC7N9Y9VVKzK3Kb33KVaBFawvzjIcc+GFXMDFZ35b33vWhYzTl3sJpLY
hjfGpYTB1zHSj6f7a9mW7d15E/lyfqMKCzewZWnko0hISM8Jm1LxU3PMFJa8TR2/
yB6IUDDJnEk6fSwUwaCluAJv3kfnhs/S3fMFw+5cYkcmgW7yaE+K9nJ3aEkx5l7x
9sXjAtc7zbAwEuJZ+5C1+CgwWGKsfLKtXbjqMYAIAYep5oa+UrJ4L77aZyTV1mSD
oRJs0LmNmachV5nxKFHAaijVc6vmZNhcD9ygbM5qeLGoGby+W8g=
=dgM4
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM cleanups for 6.10:
- Misc cleanups extracted from the "exit on missing userspace mapping" series,
which has been put on hold in anticipation of a "KVM Userfault" approach,
which should provide a superset of functionality.
- Remove kvm_make_all_cpus_request_except(), which got added to hack around an
AVIC bug, and then became dead code when a more robust fix came along.
- Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation.
- Move a lot of state that was previously stored on a per vcpu
basis into a per-CPU area, because it is only pertinent to the
host while the vcpu is loaded. This results in better state
tracking, and a smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in
nested virtualisation. The last two instructions also require
emulating part of the pointer authentication extension.
As a result, the trap handling of pointer authentication has
been greattly simplified.
- Turn the global (and not very scalable) LPI translation cache
into a per-ITS, scalable cache, making non directly injected
LPIs much cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing
for smaller EL2 mapping and some flexibility in implementing
more or less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR
map has been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=CEfD
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.10
- Move a lot of state that was previously stored on a per vcpu
basis into a per-CPU area, because it is only pertinent to the
host while the vcpu is loaded. This results in better state
tracking, and a smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in
nested virtualisation. The last two instructions also require
emulating part of the pointer authentication extension.
As a result, the trap handling of pointer authentication has
been greattly simplified.
- Turn the global (and not very scalable) LPI translation cache
into a per-ITS, scalable cache, making non directly injected
LPIs much cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing
for smaller EL2 mapping and some flexibility in implementing
more or less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR
map has been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
In some cases, like with SEV-SNP, guest memory needs to be updated in a
platform-specific manner before it can be safely freed back to the host.
Wire up arch-defined hooks to the .free_folio kvm_gmem_aops callback to
allow for special handling of this sort when freeing memory in response
to FALLOC_FL_PUNCH_HOLE operations and when releasing the inode, and go
ahead and define an arch-specific hook for x86 since it will be needed
for handling memory used for SEV-SNP guests.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20231230172351.574091-6-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
During guest run-time, kvm_arch_gmem_prepare() is issued as needed to
prepare newly-allocated gmem pages prior to mapping them into the guest.
In the case of SEV-SNP, this mainly involves setting the pages to
private in the RMP table.
However, for the GPA ranges comprising the initial guest payload, which
are encrypted/measured prior to starting the guest, the gmem pages need
to be accessed prior to setting them to private in the RMP table so they
can be initialized with the userspace-provided data. Additionally, an
SNP firmware call is needed afterward to encrypt them in-place and
measure the contents into the guest's launch digest.
While it is possible to bypass the kvm_arch_gmem_prepare() hooks so that
this handling can be done in an open-coded/vendor-specific manner, this
may expose more gmem-internal state/dependencies to external callers
than necessary. Try to avoid this by implementing an interface that
tries to handle as much of the common functionality inside gmem as
possible, while also making it generic enough to potentially be
usable/extensible for TDX as well.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for adding a function that walks a set of pages
provided by userspace and populates them in a guest_memfd,
add a version of kvm_gmem_get_pfn() that has a "bool prepare"
argument and passes it down to kvm_gmem_get_folio().
Populating guest memory has to call repeatedly __kvm_gmem_get_pfn()
on the same file, so make the new function take struct file*.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
guest_memfd pages are generally expected to be in some arch-defined
initial state prior to using them for guest memory. For SEV-SNP this
initial state is 'private', or 'guest-owned', and requires additional
operations to move these pages into a 'private' state by updating the
corresponding entries the RMP table.
Allow for an arch-defined hook to handle updates of this sort, and go
ahead and implement one for x86 so KVM implementations like AMD SVM can
register a kvm_x86_ops callback to handle these updates for SEV-SNP
guests.
The preparation callback is always called when allocating/grabbing
folios via gmem, and it is up to the architecture to keep track of
whether or not the pages are already in the expected state (e.g. the RMP
table in the case of SEV-SNP).
In some cases, it is necessary to defer the preparation of the pages to
handle things like in-place encryption of initial guest memory payloads
before marking these pages as 'private'/'guest-owned'. Add an argument
(always true for now) to kvm_gmem_get_folio() that allows for the
preparation callback to be bypassed. To detect possible issues in
the way userspace initializes memory, it is only possible to add an
unprepared page if it is not already included in the filemap.
Link: https://lore.kernel.org/lkml/ZLqVdvsF11Ddo7Dq@google.com/
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20231230172351.574091-5-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because kvm_gmem_get_pfn() is called from the page fault path without
any of the slots_lock, filemap lock or mmu_lock taken, it is
possible for it to race with kvm_gmem_unbind(). This is not a
problem, as any PTE that is installed temporarily will be zapped
before the guest has the occasion to run.
However, it is not possible to have a complete unbind+bind
racing with the page fault, because deleting the memslot
will call synchronize_srcu_expedited() and wait for the
page fault to be resolved. Thus, we can still warn if
the file is there and is not the one we expect.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some SNP ioctls will require the page not to be in the pagecache, and as such they
will want to return EEXIST to userspace. Start by passing the error up from
filemap_grab_folio.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
