Add the Gaudi2 code to initialize the ASIC's profiler. The profile
receives its initialization values from the user, same as in Gaudi2,
but the code to initialize is in the driver because the configuration
space of the device is not directly exposed to the user.
Signed-off-by: Benjamin Dotan <bdotan@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Use the generic security module to block all registers in the ASIC and
then open only those that are needed to be accessed by the user.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As the ASICs become more complex and have many more registers, we need
a better way to configure the security properties.
As a reminder, we have two dedicated mechanisms for security:
Range Registers and Protection bits. Those mechanisms protect sensitive
memory and configuration areas inside the device.
The generic module handles the low-level part of the configuration,
because the configuration mechanism is identical in all ASICs. The
difference is the address ranges and register names.
Any ASIC that use this block should first block all the register
blocks in the ASIC. Then, it should open only the registers that
need to be accessed by the user (This is opposed to Goya and Gaudi,
where we blocked only what should not be accesses by the user).
The module contains several functions, to unblock single register,
multiple registers, entire blocks, ranges, ranges with mask.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There are a couple of device variables that are used for testing
purposes and they are set to fixed values.
Remove the variables that are not relevant anymore and document the
remaining variables.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
New asic properties were added for Gaudi2. We want to initialize
and use them, when relevant, also for Goya and Gaudi.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There are a number of new ASIC-specific functions that were added
for Gaudi2. To make the common code work, we need to define empty
implementations of those functions for Goya and Gaudi.
Some functions will return error if called with Goya/Gaudi.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add the ASIC-specific code for Gaudi2. Supply (almost) all of the
function callbacks that the driver's common code need to initialize,
finalize and submit workloads to the Gaudi2 ASIC.
It also contains the code to initialize the F/W of the Gaudi2 ASIC
and to receive events from the F/W.
It contains new debugfs entry to dump razwi events. razwi is a case
where the device's engines create a transaction that reaches an
invalid destination.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add the new defines for GAUDI2 uapi interface.
It includes the following:
1. Enums of engines and PLLs.
2. New information in the info IOCTL that is retrieved by the driver.
3. Update comments regarding the CB/CS/wait for CS ioctls.
4. New fields in the debug IOCTL for configuring the profiler for
Gaudi2.
There is no new IOCTL.
Some of the changes are also relevant for Greco (which will be
upstreamed later this year). When ever it says "Greco and onwards",
it means it is also for Gaudi2.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add the relevant GAUDI2 ASIC registers header files. These files are
generated automatically from a tool maintained by the VLSI engineers.
There are more files which are not upstreamed because only very few
defines from those files are used in the driver. For those files, I
copied the relevant defines into gaudi2_regs.h and gaudi2_masks.h, to
reduce the size of this patch.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Region structure is derived from region type, hence no need to pass
it as an argument.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
in gaudi_scrub_device_mem, replace call to hl_poll_timeout
with a while loop to avoid using dummy variables.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because in future ASICs the driver will allow the user to set the
page size we need to make sure this data is propagated in all APIs.
In addition, since this is already an ASIC property we no longer need
ASIC function for it.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
free_device_memory() ends with if and else, each has a return statement,
followed by another return statement that can never be reached.
Restructure the function and remove this dead code.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We want to receive an error interrupt in case the watchdog timer
expires on arbitration event in the queues.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We dropped support for page sizes that are not power of 2.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This is a pre-requisite patch for adding tracepoints to the DMA memory
operations (allocation/free) in the driver.
The main purpose is to be able to cross data with the map operations and
determine whether memory violation occurred, for example free DMA
allocation before unmapping it from device memory.
To achieve this the DMA alloc/free code flows were refactored so that a
single DMA tracepoint will catch many flows.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The values in this enum are not used by h/w but are a contract
between userspace and the kernel driver so they must be defined
in the uapi file.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Set a default value for memory scrubbing
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In future ASICs, it would be possible to have a non-idle
device when context is released. We thus need to postpone the
scrubbing. Postpone it to hpriv release if reset is not executed
or to device late init if reset is executed.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In the callback scrub_device_mem, use 'memory_scrub_val'
from debugfs for the scrubbing value.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We use scrub_device_mem only to scrub the entire SRAM and entire
DRAM. Therefore there is no need to send addr and size
args to the callback.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is no need to do memory scrub when unmapping anymore as it is
an overhead as long as we have a single user at any given time.
Remove that code and change return value of free_phys_pg_pack to void
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
For easier debug, it is desirable to have a simple way
to know whether the device is secured or not, hence we dump this
indication during boot.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is a rare race condition in CB completion mechanism, that can
occur under a very high pressure of command submissions.
The preconditions for this to happen are:
1. There should be enough command submissions for the pre-allocated
patched CB pool to run out of commands. At this stage we start
allocating new patched CBs as they arrive.
2. CB size has to be exactly (128*n + 104)B for some n, i.e. 24B below
a cache line end.
The flow:
1. Two command buffers being completed on different streams, at the
same time. Denote those CB1 and CB2.
2. Each command buffer is injected with two messages, 16B each - one
for a HBW update of the completion queue, another to raise
interrupt.
3. Assume CB1 updated the completion queue and raise the interrupt.
4. Assume CB2 updated the completion queue but did not raise the
interrupt yet.
5. The host receives the interrupt. It goes over the completion queue
and sees two completions - CB1 and CB2. Release them both.
6. CB2 performs the last command. The problem is that the last command
is split between 2 cache lines. So to read the last 8B of the last
command, it has to access the host again. Problem is - CB2 is
already released. This causes a DMAR error.
The solution to this problem is simply to make sure the last two
commands in the CB are always in the same cache line, using NOP padding.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
move the field memory_scrub_val from struct hl_dbg_device_entry
to struct hl_device. This is because we want to use
this field also if debugfs is off.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Multiple SRAM SERR events are treated as critical events,
and host should be notified about it. Thus, adding is_critical
indication as part of SRAM ECC failure packet.
Signed-off-by: ran shalit <rshalit@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When a device error occurs, user process would like to get some
indication on the error by reading some device HW info. If the
device is unavailable, user process can't perform any HW device
reading.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This asic callback function is not called anymore from the common code.
The asic-specific function itself is called but from within the
asic-specific code.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When validating NIC queues, queue offset calculation must be
performed only for NIC queues.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Driver performs no validity check for the user cq counter offset
used in both wait_for_interrupt and register_for_timestamp APIs.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Once FW raised an event following a MME2 QMAN error, the driver should
have gone to the corresponding status registers, trying to gather more
info on the error, yet it was accidentally accessing MME1 QMAN address
space.
Generally, we have x4 MMEs, while 0 & 2 are marked MASTER, and
1 & 3 are marked SLAVE. The former can be addressed, yet addressing
the latter is considered an access violation, and will result in a
hung system, which is what unintentionally happened above.
Note that this cannot happen in a secured system, since these registers
are protected with range registers.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When sending a packet to FW right after it made reset, we will get
packet timeout. Since it is expected behavior, we don't need to
print an error in such case.
Hence, when driver is in hard reset it will avoid from printing error
messages about packet timeout.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The Driver needs to inform the User process whenever one of its
CS is timed out. The Driver shall recognize the CS timeout and shall
send an eventfd notification, towards user space, whenever a timeout
is expired on a CS.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Device reset event, indicates that the device shall be reset -
after a short delay. In such case, the driver sends a notification
towards the User process. This allows the User process
to be able to take several debug actions for system
diagnostic purposes.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to prepare the driver code for device reset event
notification, change the event handler function flow to call
device reset from one code block.
In addition, the commit fixes an issue that reset was performed
w/o checking the 'hard_reset_on_fw_event' state and w/o setting
the HL_DRV_RESET_DELAY flag.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The info ioctl retrieves information on the last undefined opcode
occurred.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
when an undefined opcode error occurres, the driver collects
the relevant information from the Qman and stores it inside
the hdev data structure. An event fd indication is sent towards the
user space.
Note: another commit shall be followed which will add support to
read the error info by an ioctl.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
hl_get_compute_ctx() is used to get the pointer to the compute context
from the hpriv object.
The function is called in code paths that are not necessarily initiated
by user, so it is possible that a context release process will happen in
parallel.
This can lead to a race condition in which hl_get_compute_ctx()
retrieves the context pointer, and just before it increments the context
refcount, the context object is released and a freed memory is accessed.
To avoid this race, add a mutex to protect the context pointer in hpriv.
With this lock, hl_get_compute_ctx() will be able to detect if the
context has been released or is about to be released.
struct hl_ctx_mgr has a mutex for contexts IDR with a similar "ctx_lock"
name, so rename it to just "lock" to avoid a confusion with the new
lock.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Often, the user is not interested in the completion timestamp of all
command submissions.
A common situation is, for example, when the user submits a burst of,
possibly, several thousands of commands, then request the completion
timestamp of only couple of specific key commands from all the burst.
The problem is that currently, the outcome of the early commands may be
lost, due to a large amount of later commands, that the user does not
really care about.
This patch creates a separate store with the outcomes of commands the
user has mark explicitly as interested in. This store does not mix the
marked commands with the unmarked ones, hence the data there will
survive for much longer.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
