Commit Graph

46 Commits

Author SHA1 Message Date
Geert Uytterhoeven e221cc99be spi: sh-msiof: Add support for new R-Car Gen2 SoCs
Add support for MSIOF in:
  - r8a7792 (R-Car V2H)
  - r8a7793 (R-Car M2-N)
  - r8a7794 (R-Car E2)

r8a7791 is now called "R-Car M2-W".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-28 19:17:46 +01:00
Geert Uytterhoeven 7a9f957b39 spi: sh-msiof: Fix transmit-only DMA transfers
Fix tx/rx mixup, which broke transmit-only transfers.

Introduced by commit 4240305f7cbdc7782aa8bc40cc702775d9ac0839
("spi: sh-msiof: Fix leaking of unused DMA descriptors").

Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-16 17:14:30 -05:00
Geert Uytterhoeven a5e7c719fe spi: sh-msiof: Return early in sh_msiof_dma_once() where possible
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-16 17:14:30 -05:00
Geert Uytterhoeven a6be4de6a2 spi: sh-msiof: Add DT support to DMA setup
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-16 17:14:30 -05:00
Geert Uytterhoeven 52fba2b85d spi: sh-msiof: Configure DMA slave bus width
The new Renesas R-Car Gen2 DMA Controller driver (rcar-dmac) requires
explicit configuration of the DMA slave bus width.
Hardcode the DMA transfer size to 4 bytes, as MSIOF DMA is limited to
32-bit words.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-16 17:14:30 -05:00
Geert Uytterhoeven 3e81b59208 spi: sh-msiof: Fix leaking of unused DMA descriptors
If dmaengine_prep_slave_sg() or dmaengine_submit() fail, we may leak
unused DMA descriptors.

As per Documentation/dmaengine.txt, once a DMA descriptor has been
obtained, it must be submitted. Hence:
  - First prepare and submit all DMA descriptors,
  - Prepare the SPI controller for DMA,
  - Start DMA by calling dma_async_issue_pending(),
  - Make sure to call dmaengine_terminate_all() on all descriptors that
    haven't completed.

Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-16 17:13:14 -05:00
Geert Uytterhoeven 5dabcf2f27 spi: sh-msiof: Use correct device for DMA mapping with IOMMU
To function correctly in the presence of an IOMMU, the DMA buffers must be
mapped using the DMA channel's device instead of the MSIOF platform
device's device.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-16 23:19:34 +01:00
Geert Uytterhoeven 279d2378c9 spi: sh-msiof: Handle dmaengine_prep_slave_single() failures gracefully
As typically a shmobile SoC has less DMA channels than devices that can use
DMA, we may want to prioritize access to the DMA channels in the future.
This means that dmaengine_prep_slave_single() may start failing
arbitrarily.

Handle dmaengine_prep_slave_single() failures gracefully by falling back to
PIO. This requires moving DMA-specific configuration of the MSIOF device
after the call(s) to dmaengine_prep_slave_single().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-16 22:41:51 +01:00
Geert Uytterhoeven b0d0ce8b6b spi: sh-msiof: Add DMA support
Add DMA support to the MSIOF driver using platform data.

As MSIOF DMA is limited to 32-bit words (requiring byte/wordswapping for
smaller wordsizes), and the group length is limited to 256 words, DMA is
performed on two fixed pages, allocated and mapped at driver initialization
time.

Performance figures (in Mbps) on r8a7791/koelsch at different SPI clock
frequencies for 1024-byte and 4096-byte transfers:

                   1024 bytes           4096 bytes
  -  3.25 MHz: PIO  2.1, DMA  2.6 | PIO  2.8, DMA  3.1
  -  6.5  MHz: PIO  3.2, DMA  4.4 | PIO  5.0, DMA  5.9
  - 13    MHz: PIO  4.2, DMA  6.6 | PIO  8.2, DMA 10.7
  - 26    MHz: PIO  5.9, DMA 10.4 | PIO 12.4, DMA 18.4

Note that DMA is only faster than PIO for transfers that exceed the FIFO
size (typically 64 words / 256 bytes).

Also note that large transfers (larger than the group length for DMA, or
larger than the FIFO size for PIO), should use cs-gpio (with the
appropriate pinmux setup), as the hardware chipselect will be deasserted in
between chunks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-30 19:54:57 +01:00
Geert Uytterhoeven 0312d59130 spi: sh-msiof: Refactor sh_msiof_transfer_one()
- Move buffer pointer and length setup to the top,
  - Make unsigned values unsigned,
  - Loop over words and increment pointers instead of recalculating them,
    which allows to kill bytes_done.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21 11:17:36 +01:00
Geert Uytterhoeven 75b82e23a4 spi: sh-msiof: Improve transfer error handling
- Add a timeout when waiting for the transfer complete interrupt,
  - If sh_msiof_spi_stop() fails, there's no need to clear IER, as the
    interrupt handler has already done that,
  - Propagate transfer failures in sh_msiof_transfer_one().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21 11:17:36 +01:00
Geert Uytterhoeven 76c02e7161 spi: sh-msiof: Extract sh_msiof_spi_{start,stop}() helpers
Based on an old patch by Guennadi Liakhovetski <g.liakhovetski@gmx.de>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21 11:17:35 +01:00
Geert Uytterhoeven 2e2b36872d spi: sh-msiof: Add more register documentation
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21 11:17:34 +01:00
Jingoo Han 1e8231b79c spi: sh-msiof: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-29 12:01:41 -07:00
Mark Brown 81235b4ea3 Merge remote-tracking branches 'spi/topic/s3c64xx', 'spi/topic/sc18is602', 'spi/topic/sh-hspi', 'spi/topic/sh-msiof', 'spi/topic/sh-sci', 'spi/topic/sirf' and 'spi/topic/spidev' into spi-next 2014-03-30 00:51:34 +00:00
Geert Uytterhoeven e2a0ba547b spi: sh-msiof: Convert to spi core auto_runtime_pm framework
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-11 10:44:45 +00:00
Axel Lin b141586032 spi: sh-msiof: Kill sh_msiof_spi_bits and sh_msiof_spi_hz functions
In the implementation of __spi_validate(), spi core will set transfer
bits_per_word and max speed as spi device default if it is not set for
this transfer. So we can remove the same implementation in this driver.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 10:46:42 +09:00
Geert Uytterhoeven 1bd6363bc0 spi: sh-msiof: Use core message handling instead of spi-bitbang
The only remaining feature of spi-bitbang used by this driver is the
chipselect() callback, which just does conditional GPIO.
This is handled fine by the SPI core's spi_set_cs(), hence switch the
driver to use the core message handling through our own transfer_one()
method.

As the (optional) GPIO CS is no longer deasserted at spi_master.setup()
time (through spi_bitbang_setup() and the spi_bitbang.chipselect()
callback), we now have to take care of that ourselves.

Remove the call to spi_master_put() in sh_msiof_spi_remove(), as our SPI
master is now registered using devm_spi_register_master()
(spi_bitbang_start() uses the non-managed version).

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-27 19:44:04 +09:00
Geert Uytterhoeven 2416289c71 spi: sh-msiof: Convert to let spi core validate xfer->bits_per_word
Set bits_per_word_mask so the spi core will reject transfers that attempt
to use an unsupported bits_per_word value.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-27 19:44:03 +09:00
Geert Uytterhoeven c833ff7304 spi: sh-msiof: Move clock management to (un)prepare_message()
Move clock management and pin configuration from the bitbang chipselect()
method to the SPI core prepare_message() and unprepare_message() methods.

As spi_master.{,un}prepare_message() is guaranteed to be called in
matching pairs, the clock management synchronization is no longer needed.

As sh_msiof_spi_set_pin_regs() is no longer called at spi_master.setup()
time (through spi_bitbang_setup() and the spi_bitbang.chipselect()
callback), we now have to take care of that ourselves.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-27 19:44:03 +09:00
Geert Uytterhoeven beb74bb087 spi: sh-msiof: Add support for R-Car H2 and M2
Add support for the MSIOF variant in the R-Car H2 (r8a7790) and M2
(r8a7791) SoCs.

Binding documentation:
  - Add future-proof "renesas,msiof-<soctype>" compatible values,
  - The default for "renesas,rx-fifo-size" is 256 on R-Car H2 and M2,
  - "renesas,tx-fifo-size" and "renesas,rx-fifo-size" are deprecated for
    soctype-specific bindings,
  - Add example bindings.

Implementation:
  - MSIOF on R-Car H2 and M2 requires the transmission of dummy data if
    data is being received only (cfr. "Set SICTR.TSCKE to 1" and "Write
    dummy transmission data to SITFDR" in paragraph "Transmit and Receive
    Procedures" of the Hardware User's Manual).
  - As RX depends on TX, MSIOF on R-Car H2 and M2 also lacks the RSCR
    register (Receive Clock Select Register), and some bits in the RMDR1
    (Receive Mode Register 1) and TMDR2 (Transmit Mode Register 2)
    registers.
  - Use the recently introduced SPI_MASTER_MUST_TX flag to enable support
    for dummy transmission in the SPI core, and to differentiate from other
    MSIOF implementations in code paths that need this.
  - New DT compatible values ("renesas,msiof-r8a7790" and
    "renesas,msiof-r8a7791") are added, as well as new platform device
    names ("spi_r8a7790_msiof" and "spi_r8a7791_msiof").
  - The default RX FIFO size is 256 words on R-Car H2 and M2.

This is loosely based on a set of patches from Takashi Yoshii
<takasi-y@ops.dti.ne.jp>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-27 19:44:02 +09:00
Geert Uytterhoeven 50a7e23f53 spi: sh-msiof: Move default FIFO sizes to device ID data
As different variants of MSIOF have different FIFO sizes, move the default
FIFO sizes to a new struct sh_msiof_chipdata, pointed to from the device
ID data.

[Moved ifdef to fix build -- broonie]

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-27 19:43:27 +09:00
Geert Uytterhoeven 32d3b2d1dd spi: sh-msiof: Improve bindings
Documentation:
  - Add missing "interrupt-parent", "#address-cells", "#size-cells", and
    "clocks" properties,
  - Add missing default values for "num-cs", "renesas,tx-fifo-size" and
    "renesas,rx-fifo-size",
  - Add a reference to the pinctrl documentation.

Implementation:
  - As "num-cs" is marked optional, provide a sensible default.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-27 19:33:47 +09:00
Geert Uytterhoeven 8d19534a8d spi: sh-msiof: Use the core cs_gpio field, and make it optional
In current implementation, CS is controlled by GPIO, which is passed
through spi->controller_data.  However, the MSIOF HW module has a function
to output CS by itself, which is already enabled and actual switch will be
done by pinmux.

Store the GPIO number in the core cs_gpio field, and ignore it if it is
an invalid (negative) GPIO number.

Loosely based on a patch from Takashi Yoshii <takasi-y@ops.dti.ne.jp>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-22 12:11:12 +09:00
Geert Uytterhoeven 01cfef57ef spi: sh-msiof: Add more register documentation
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-22 12:11:07 +09:00
Geert Uytterhoeven 6a85fc5af1 spi: sh-msiof: Change hz from unsigned long to u32
Both spi_transfer.speed_hz and spi_master.max_speed_hz are u32

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-22 12:11:07 +09:00
Geert Uytterhoeven a669c11a0d spi: sh-msiof: Typo in comment s/tx/rx/
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-22 12:11:06 +09:00
Geert Uytterhoeven f7c05e837d spi: sh-msiof: Fix SPI bus population from DT
DT doesn't instantiate SPI children if spi_master.dev.of_node is not set up
properly.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-22 12:11:04 +09:00
Paul Gortmaker 3a44623d5e spi: delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03 12:20:35 +00:00
Mark Brown 907e26b6f5 Merge remote-tracking branches 'spi/topic/fsl-espi', 'spi/topic/gpio', 'spi/topic/hspi', 'spi/topic/mpc512x', 'spi/topic/msiof', 'spi/topic/nuc900', 'spi/topic/oc-tiny', 'spi/topic/omap', 'spi/topic/orion' and 'spi/topic/pci' into spi-linus 2014-01-23 13:07:09 +00:00
Takashi Yoshii 50a7799829 spi: spi-sh-msiof: set hi/low Active for HW CS
Set hardware CS(CS control function on MSIOF <-> GPIO CS) polarity
according to SPI_CS_HIGH flag on spi->mode.

Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-02 12:54:25 +00:00
Takashi Yoshii e4d313ff79 spi: spi-sh-msiof: round up div to fix freq calculation
Truncation on integer division in sh_msiof_spi_set_clk_regs()
results in insufficient transfer frequency (> max_speed_freq).

For example, source 52MHz, required max 6MHz
 52/6 = 8.6 --> 8, then 1/8 table selected,
and result in 52/8 = 6.5 MHz (>6MHz)

Rounding it up is a simple solution.
 52/6 = 8.6 --> 9, then 1/16 table selected,
and result in 52/16 = 3.25 MHz

Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-02 12:48:05 +00:00
Laurent Pinchart 5c32d29f13 spi: sh-msiof: Convert to clk_prepare/unprepare
Get the driver ready for the migration to the common clock framework by
calling clk_prepare() and clk_unprepare(). The calls are added in the
probe and remove handlers as the clk_enable() and clk_disable() calls
are located in atomic context and there's no callback function in
non-atomic context that can be used to prepare/unprepare the clock.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-28 10:26:58 +00:00
Laurent Pinchart b4dd05de3d spi: sh-msiof: Use devm_* managed allocators
This simplifies error and cleanup code paths.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-28 10:26:56 +00:00
Laurent Pinchart 3e6006e4ae spi: sh-msiof: Fix warnings due to improper casts
Cast pointers to uintptr_t instead of unsigned int. This fixes warnings
on platforms where pointers have a different size than int.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-27 15:49:07 +00:00
Wolfram Sang 16735d022f tree-wide: use reinit_completion instead of INIT_COMPLETION
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.

[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:21 +09:00
Mark Brown 368ce0bca4 Merge remote-tracking branch 'spi/topic/sh-msiof' into spi-next 2013-09-01 13:49:11 +01:00
Jingoo Han 8074cf063e spi: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29 13:56:23 +01:00
Mark Brown 33bf2c0b7d spi/sh-msiof: Remove unneeded empty runtime PM callbacks
Previously the runtime PM API insisted on having callbacks for everything
but this requirement was removed a while ago so the empty callbacks can
also be removed.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28 19:15:29 +01:00
Sachin Kamat 691ee4edd4 spi: spi-sh-msiof: Use of_match_ptr() macro
This eliminates having an #ifdef returning NULL for the case
when OF is disabled.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01 14:27:14 +01:00
Bastian Hecht cf9c86efec spi/sh-msiof: Add device tree parsing to driver
This adds the capability to retrieve setup data from the device tree
node. The usage of platform data is still available.

Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 12:26:58 +00:00
Bastian Hecht 078b6ead72 spi/sh-msiof: Remove unneeded clock name
clk_get() no longer needs a character string for associating the right
clock as this is done via the device struct now.

Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06 14:05:00 +00:00
Paul Gortmaker d7614de422 spi: Add module.h to implicit users in drivers/spi
We are clipping down the presence of module.h, since it was
everywhere.  If you really need it, you better call it out,
as per this changeset.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:17 -04:00
Grant Likely 940ab88962 drivercore: Add helper macro for platform_driver boilerplate
For simple modules that contain a single platform_driver without any
additional setup code then ends up being a block of duplicated
boilerplate.  This patch adds a new macro, module_platform_driver(),
which replaces the module_init()/module_exit() registrations with
template functions.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Reviewed-by: Magnus Damm <magnus.damm@gmail.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2011-10-25 00:35:47 +02:00
Yong Zhang 38ada214fa spi: irq: Remove IRQF_DISABLED
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-24 14:14:40 +02:00
Grant Likely ca632f5566 spi: reorganize drivers
Sort the SPI makefile and enforce the naming convention spi_*.c for
spi drivers.

This change also rolls the contents of atmel_spi.h into the .c file
since there is only one user of that particular include file.

v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be
      be the predominant pattern for subsystem prefixes.
    - Clean up filenames in Kconfig and header comment blocks

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2011-06-06 01:16:30 -06:00