- Add Eric Farman as maintainer for s390 virtio drivers.
- Improve machine check handling, and avoid incorrectly injecting a machine
check into a kvm guest.
- Add cond_resched() call to gmap page table walker in order to avoid
possible huge latencies. Also use non-quiesing sske instruction to speed
up storage key handling.
- Add __GFP_NORETRY to KEXEC_CONTROL_MEMORY_GFP so s390 behaves similar like
common code.
- Get sie control block address from correct stack slot in perf event
code. This fixes potential random memory accesses.
- Change uaccess code so that the exception handler sets the result of
get_user() and __get_kernel_nofault() to zero in case of a fault. Until
now this was done via input parameters for inline assemblies. Doing it
via fault handling is what most or even all other architectures are
doing.
- Couple of other small cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=BOi4
-----END PGP SIGNATURE-----
Merge tag 's390-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
"Just a couple of small improvements, bug fixes and cleanups:
- Add Eric Farman as maintainer for s390 virtio drivers.
- Improve machine check handling, and avoid incorrectly injecting a
machine check into a kvm guest.
- Add cond_resched() call to gmap page table walker in order to avoid
possible huge latencies. Also use non-quiesing sske instruction to
speed up storage key handling.
- Add __GFP_NORETRY to KEXEC_CONTROL_MEMORY_GFP so s390 behaves
similar like common code.
- Get sie control block address from correct stack slot in perf event
code. This fixes potential random memory accesses.
- Change uaccess code so that the exception handler sets the result
of get_user() and __get_kernel_nofault() to zero in case of a
fault. Until now this was done via input parameters for inline
assemblies. Doing it via fault handling is what most or even all
other architectures are doing.
- Couple of other small cleanups and fixes"
* tag 's390-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/stack: add union to reflect kvm stack slot usages
s390/stack: merge empty stack frame slots
s390/uaccess: whitespace cleanup
s390/uaccess: use __noreturn instead of __attribute__((noreturn))
s390/uaccess: use exception handler to zero result on get_user() failure
s390/uaccess: use symbolic names for inline assembler operands
s390/mcck: isolate SIE instruction when setting CIF_MCCK_GUEST flag
s390/mm: use non-quiescing sske for KVM switch to keyed guest
s390/gmap: voluntarily schedule during key setting
MAINTAINERS: Update s390 virtio-ccw
s390/kexec: add __GFP_NORETRY to KEXEC_CONTROL_MEMORY_GFP
s390/Kconfig.debug: fix indentation
s390/Kconfig: fix indentation
s390/perf: obtain sie_block from the right address
s390: generate register offsets into pt_regs automatically
s390: simplify early program check handler
s390/crypto: fix scatterwalk_unmap() callers in AES-GCM
Add a union which describes how the empty stack slots are being used
by kvm and perf. This should help to avoid another bug like the one
which was fixed with commit c9bfb460c3 ("s390/perf: obtain sie_block
from the right address").
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Tested-by: Nico Boehr <nrb@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Merge empty1 and empty2 arrays within the stack frame to one single
array. This is possible since with commit 42b01a553a ("s390: always
use the packed stack layout") the alternative stack frame layout is
gone.
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Whitespace cleanup to get rid if some checkpatch findings, but mainly
to have consistent coding style within the header file again.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Historically the uaccess code pre-initializes the result of get_user()
(and now also __get_kernel_nofault()) to zero and uses the result as
input parameter for inline assemblies. This is different to what most,
if not all, other architectures are doing, which set the result to
zero within the exception handler in case of a fault.
Use the new extable mechanism and handle zeroing of the result within
the exception handler in case of a fault.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Avoid invoking the OOM-killer when allocating the control page. This
is the s390 variant of commit dc5cccacf4 ("kexec: don't invoke
OOM-killer for control page allocation").
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
* Support for the Svpbmt extension, which allows memory attributes to be
encoded in pages.
* Support for the Allwinner D1's implementation of page-based memory
attributes.
* Support for running rv32 binaries on rv64 systems, via the compat
subsystem.
* Support for kexec_file().
* Support for the new generic ticket-based spinlocks, which allows us to
also move to qrwlock. These should have already gone in through the
asm-geneic tree as well.
* A handful of cleanups and fixes, include some larger ones around
atomics and XIP.
-----BEGIN PGP SIGNATURE-----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=Loi6
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the Svpbmt extension, which allows memory attributes to
be encoded in pages
- Support for the Allwinner D1's implementation of page-based memory
attributes
- Support for running rv32 binaries on rv64 systems, via the compat
subsystem
- Support for kexec_file()
- Support for the new generic ticket-based spinlocks, which allows us
to also move to qrwlock. These should have already gone in through
the asm-geneic tree as well
- A handful of cleanups and fixes, include some larger ones around
atomics and XIP
* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
riscv: compat: Using seperated vdso_maps for compat_vdso_info
RISC-V: Fix the XIP build
RISC-V: Split out the XIP fixups into their own file
RISC-V: ignore xipImage
RISC-V: Avoid empty create_*_mapping definitions
riscv: Don't output a bogus mmu-type on a no MMU kernel
riscv: atomic: Add custom conditional atomic operation implementation
riscv: atomic: Optimize dec_if_positive functions
riscv: atomic: Cleanup unnecessary definition
RISC-V: Load purgatory in kexec_file
RISC-V: Add purgatory
RISC-V: Support for kexec_file on panic
RISC-V: Add kexec_file support
RISC-V: use memcpy for kexec_file mode
kexec_file: Fix kexec_file.c build error for riscv platform
riscv: compat: Add COMPAT Kbuild skeletal support
riscv: compat: ptrace: Add compat_arch_ptrace implement
riscv: compat: signal: Add rt_frame implementation
riscv: add memory-type errata for T-Head
...
for -stable. The remainder address pre-5.19 issues and are cc:stable.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYpEC8gAKCRDdBJ7gKXxA
jlukAQDCaXF7YTBjpoaAl0zhSu+5h7CawiB6cnRlq87/uJ2S4QD/eLVX3zfxI2DX
YcOhc5H8BOgZ8ppD80Nv9qjmyvEWzAA=
=ZFFG
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Six hotfixes.
The page_table_check one from Miaohe Lin is considered a minor thing
so it isn't marked for -stable. The remainder address pre-5.19 issues
and are cc:stable"
* tag 'mm-hotfixes-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/page_table_check: fix accessing unmapped ptep
kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]
mm/page_alloc: always attempt to allocate at least one page during bulk allocation
hugetlb: fix huge_pmd_unshare address update
zsmalloc: fix races between asynchronous zspage free and page migration
Revert "mm/cma.c: remove redundant cma_mutex lock"
Since commit d1bcae833b32f1 ("ELF: Don't generate unused section
symbols") [1], binutils (v2.36+) started dropping section symbols that
it thought were unused. This isn't an issue in general, but with
kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a
separate .text.unlikely section and the section symbol ".text.unlikely"
is being dropped. Due to this, recordmcount is unable to find a non-weak
symbol in .text.unlikely to generate a relocation record against.
Address this by dropping the weak attribute from these functions.
Instead, follow the existing pattern of having architectures #define the
name of the function they want to override in their headers.
[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1
[akpm@linux-foundation.org: arch/s390/include/asm/kexec.h needs linux/module.h]
Link: https://lkml.kernel.org/r/20220519091237.676736-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* ultravisor communication device driver
* fix TEID on terminating storage key ops
RISC-V:
* Added Sv57x4 support for G-stage page table
* Added range based local HFENCE functions
* Added remote HFENCE functions based on VCPU requests
* Added ISA extension registers in ONE_REG interface
* Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
* Add support for the ARMv8.6 WFxT extension
* Guard pages for the EL2 stacks
* Trap and emulate AArch32 ID registers to hide unsupported features
* Ability to select and save/restore the set of hypercalls exposed
to the guest
* Support for PSCI-initiated suspend in collaboration with userspace
* GICv3 register-based LPI invalidation support
* Move host PMU event merging into the vcpu data structure
* GICv3 ITS save/restore fixes
* The usual set of small-scale cleanups and fixes
x86:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
* Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
* Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
* V_TSC_AUX support
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKN9M4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNLeAf+KizAlQwxEehHHeNyTkZuKyMawrD6
zsqAENR6i1TxiXe7fDfPFbO2NR0ZulQopHbD9mwnHJ+nNw0J4UT7g3ii1IAVcXPu
rQNRGMVWiu54jt+lep8/gDg0JvPGKVVKLhxUaU1kdWT9PhIOC6lwpP3vmeWkUfRi
PFL/TMT0M8Nfryi0zHB0tXeqg41BiXfqO8wMySfBAHUbpv8D53D2eXQL6YlMM0pL
2quB1HxHnpueE5vj3WEPQ3PCdy1M2MTfCDBJAbZGG78Ljx45FxSGoQcmiBpPnhJr
C6UGP4ZDWpml5YULUoA70k5ylCbP+vI61U4vUtzEiOjHugpPV5wFKtx5nw==
=ozWx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
file-backed transparent hugepages.
Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime
enablement of the recent huge page vmemmap optimization feature.
Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
David Vernet has done some fixup work on the memcg selftests.
Peter Xu has taught userfaultfd to handle write protection faults against
shmem- and hugetlbfs-backed files.
More DAMON development from SeongJae Park - adding online tuning of the
feature and support for monitoring of fixed virtual address ranges. Also
easier discovery of which monitoring operations are available.
Nadav Amit has done some optimization of TLB flushing during mprotect().
Neil Brown continues to labor away at improving our swap-over-NFS support.
David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
Peng Liu fixed some errors in the core hugetlb code.
Joao Martins has reduced the amount of memory consumed by device-dax's
compound devmaps.
Some cleanups of the arch-specific pagemap code from Anshuman Khandual.
Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
Roman Gushchin has done more work on the memcg selftests.
And, of course, many smaller fixes and cleanups. Notably, the customary
million cleanup serieses from Miaohe Lin.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo52xQAKCRDdBJ7gKXxA
jtJFAQD238KoeI9z5SkPMaeBRYSRQmNll85mxs25KapcEgWgGQD9FAb7DJkqsIVk
PzE+d9hEfirUGdL6cujatwJ6ejYR8Q8=
=nFe6
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
Due to historic reasons the base program check handler calls a
configurable function. Given that there is only the early program
check handler left, simplify the code by directly calling that
function.
The only other user was removed with commit d485235b00 ("s390:
assume diag308 set always works").
Also rename all functions and the asm file to reflect this.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----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=SUr3
-----END PGP SIGNATURE-----
Merge tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"These updates continue to refine the work began in 5.17 and 5.18 of
modernizing the RNG's crypto and streamlining and documenting its
code.
New for 5.19, the updates aim to improve entropy collection methods
and make some initial decisions regarding the "premature next" problem
and our threat model. The cloc utility now reports that random.c is
931 lines of code and 466 lines of comments, not that basic metrics
like that mean all that much, but at the very least it tells you that
this is very much a manageable driver now.
Here's a summary of the various updates:
- The random_get_entropy() function now always returns something at
least minimally useful. This is the primary entropy source in most
collectors, which in the best case expands to something like RDTSC,
but prior to this change, in the worst case it would just return 0,
contributing nothing. For 5.19, additional architectures are wired
up, and architectures that are entirely missing a cycle counter now
have a generic fallback path, which uses the highest resolution
clock available from the timekeeping subsystem.
Some of those clocks can actually be quite good, despite the CPU
not having a cycle counter of its own, and going off-core for a
stamp is generally thought to increase jitter, something positive
from the perspective of entropy gathering. Done very early on in
the development cycle, this has been sitting in next getting some
testing for a while now and has relevant acks from the archs, so it
should be pretty well tested and fine, but is nonetheless the thing
I'll be keeping my eye on most closely.
- Of particular note with the random_get_entropy() improvements is
MIPS, which, on CPUs that lack the c0 count register, will now
combine the high-speed but short-cycle c0 random register with the
lower-speed but long-cycle generic fallback path.
- With random_get_entropy() now always returning something useful,
the interrupt handler now collects entropy in a consistent
construction.
- Rather than comparing two samples of random_get_entropy() for the
jitter dance, the algorithm now tests many samples, and uses the
amount of differing ones to determine whether or not jitter entropy
is usable and how laborious it must be. The problem with comparing
only two samples was that if the cycle counter was extremely slow,
but just so happened to be on the cusp of a change, the slowness
wouldn't be detected. Taking many samples fixes that to some
degree.
This, combined with the other improvements to random_get_entropy(),
should make future unification of /dev/random and /dev/urandom
maybe more possible. At the very least, were we to attempt it again
today (we're not), it wouldn't break any of Guenter's test rigs
that broke when we tried it with 5.18. So, not today, but perhaps
down the road, that's something we can revisit.
- We attempt to reseed the RNG immediately upon waking up from system
suspend or hibernation, making use of the various timestamps about
suspend time and such available, as well as the usual inputs such
as RDRAND when available.
- Batched randomness now falls back to ordinary randomness before the
RNG is initialized. This provides more consistent guarantees to the
types of random numbers being returned by the various accessors.
- The "pre-init injection" code is now gone for good. I suspect you
in particular will be happy to read that, as I recall you
expressing your distaste for it a few months ago. Instead, to avoid
a "premature first" issue, while still allowing for maximal amount
of entropy availability during system boot, the first 128 bits of
estimated entropy are used immediately as it arrives, with the next
128 bits being buffered. And, as before, after the RNG has been
fully initialized, it winds up reseeding anyway a few seconds later
in most cases. This resulted in a pretty big simplification of the
initialization code and let us remove various ad-hoc mechanisms
like the ugly crng_pre_init_inject().
- The RNG no longer pretends to handle the "premature next" security
model, something that various academics and other RNG designs have
tried to care about in the past. After an interesting mailing list
thread, these issues are thought to be a) mainly academic and not
practical at all, and b) actively harming the real security of the
RNG by delaying new entropy additions after a potential compromise,
making a potentially bad situation even worse. As well, in the
first place, our RNG never even properly handled the premature next
issue, so removing an incomplete solution to a fake problem was
particularly nice.
This allowed for numerous other simplifications in the code, which
is a lot cleaner as a consequence. If you didn't see it before,
https://lore.kernel.org/lkml/YmlMGx6+uigkGiZ0@zx2c4.com/ may be a
thread worth skimming through.
- While the interrupt handler received a separate code path years ago
that avoids locks by using per-cpu data structures and a faster
mixing algorithm, in order to reduce interrupt latency, input and
disk events that are triggered in hardirq handlers were still
hitting locks and more expensive algorithms. Those are now
redirected to use the faster per-cpu data structures.
- Rather than having the fake-crypto almost-siphash-based random32
implementation be used right and left, and in many places where
cryptographically secure randomness is desirable, the batched
entropy code is now fast enough to replace that.
- As usual, numerous code quality and documentation cleanups. For
example, the initialization state machine now uses enum symbolic
constants instead of just hard coding numbers everywhere.
- Since the RNG initializes once, and then is always initialized
thereafter, a pretty heavy amount of code used during that
initialization is never used again. It is now completely cordoned
off using static branches and it winds up in the .text.unlikely
section so that it doesn't reduce cache compactness after the RNG
is ready.
- A variety of functions meant for waiting on the RNG to be
initialized were only used by vsprintf, and in not a particularly
optimal way. Replacing that usage with a more ordinary setup made
it possible to remove those functions.
- A cleanup of how we warn userspace about the use of uninitialized
/dev/urandom and uninitialized get_random_bytes() usage.
Interestingly, with the change you merged for 5.18 that attempts to
use jitter (but does not block if it can't), the majority of users
should never see those warnings for /dev/urandom at all now, and
the one for in-kernel usage is mainly a debug thing.
- The file_operations struct for /dev/[u]random now implements
.read_iter and .write_iter instead of .read and .write, allowing it
to also implement .splice_read and .splice_write, which makes
splice(2) work again after it was broken here (and in many other
places in the tree) during the set_fs() removal. This was a bit of
a last minute arrival from Jens that hasn't had as much time to
bake, so I'll be keeping my eye on this as well, but it seems
fairly ordinary. Unfortunately, read_iter() is around 3% slower
than read() in my tests, which I'm not thrilled about. But Jens and
Al, spurred by this observation, seem to be making progress in
removing the bottlenecks on the iter paths in the VFS layer in
general, which should remove the performance gap for all drivers.
- Assorted other bug fixes, cleanups, and optimizations.
- A small SipHash cleanup"
* tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (49 commits)
random: check for signals after page of pool writes
random: wire up fops->splice_{read,write}_iter()
random: convert to using fops->write_iter()
random: convert to using fops->read_iter()
random: unify batched entropy implementations
random: move randomize_page() into mm where it belongs
random: remove mostly unused async readiness notifier
random: remove get_random_bytes_arch() and add rng_has_arch_random()
random: move initialization functions out of hot pages
random: make consistent use of buf and len
random: use proper return types on get_random_{int,long}_wait()
random: remove extern from functions in header
random: use static branch for crng_ready()
random: credit architectural init the exact amount
random: handle latent entropy and command line from random_init()
random: use proper jiffies comparison macro
random: remove ratelimiting for in-kernel unseeded randomness
random: move initialization out of reseeding hot path
random: avoid initializing twice in credit race
random: use symbolic constants for crng_init states
...
All three versions of klp_arch_set_pc() do exactly the same: they
call ftrace_instruction_pointer_set().
Call ftrace_instruction_pointer_set() directly and remove
klp_arch_set_pc().
As klp_arch_set_pc() was the only thing remaining in asm/livepatch.h
on x86 and s390, remove asm/livepatch.h
livepatch.h remains on powerpc but its content is exclusively used
by powerpc specific code.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
- Make use of the IBM z16 processor activity instrumentation facility
to count cryptography operations: add a new PMU device driver so
that perf can make use of this.
- Add new IBM z16 extended counter set to cpumf support.
- Add vdso randomization support.
- Add missing KCSAN instrumentation to barriers and spinlocks, which
should make s390's KCSAN support complete.
- Add support for IPL-complete-control facility: notify the hypervisor
that kexec finished work and the kernel starts.
- Improve error logging for PCI.
- Various small changes to workaround llvm's integrated assembler
limitations, and one bug, to make it finally possible to compile the
kernel with llvm's integrated assembler. This also requires to raise
the minimum clang version to 14.0.0.
- Various other small enhancements, bug fixes, and cleanups all over
the place.
-----BEGIN PGP SIGNATURE-----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=W+1k
-----END PGP SIGNATURE-----
Merge tag 's390-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Make use of the IBM z16 processor activity instrumentation facility
to count cryptography operations: add a new PMU device driver so that
perf can make use of this.
- Add new IBM z16 extended counter set to cpumf support.
- Add vdso randomization support.
- Add missing KCSAN instrumentation to barriers and spinlocks, which
should make s390's KCSAN support complete.
- Add support for IPL-complete-control facility: notify the hypervisor
that kexec finished work and the kernel starts.
- Improve error logging for PCI.
- Various small changes to workaround llvm's integrated assembler
limitations, and one bug, to make it finally possible to compile the
kernel with llvm's integrated assembler. This also requires to raise
the minimum clang version to 14.0.0.
- Various other small enhancements, bug fixes, and cleanups all over
the place.
* tag 's390-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390/head: get rid of 31 bit leftovers
scripts/min-tool-version.sh: raise minimum clang version to 14.0.0 for s390
s390/boot: do not emit debug info for assembly with llvm's IAS
s390/boot: workaround llvm IAS bug
s390/purgatory: workaround llvm's IAS limitations
s390/entry: workaround llvm's IAS limitations
s390/alternatives: remove padding generation code
s390/alternatives: provide identical sized orginal/alternative sequences
s390/cpumf: add new extended counter set for IBM z16
s390/preempt: disable __preempt_count_add() optimization for PROFILE_ALL_BRANCHES
s390/stp: clock_delta should be signed
s390/stp: fix todoff size
s390/pai: add support for cryptography counters
entry: Rename arch_check_user_regs() to arch_enter_from_user_mode()
s390/compat: cleanup compat_linux.h header file
s390/entry: remove broken and not needed code
s390/boot: convert parmarea to C
s390/boot: convert initial lowcore to C
s390/ptrace: move short psw definitions to ptrace header file
s390/head: initialize all new psws
...
needed anymore
- Other misc improvements
-----BEGIN PGP SIGNATURE-----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=CfX1
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Borislav Petkov:
- Remove all the code around GS switching on 32-bit now that it is not
needed anymore
- Other misc improvements
* tag 'x86_core_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bug: Use normal relative pointers in 'struct bug_entry'
x86/nmi: Make register_nmi_handler() more robust
x86/asm: Merge load_gs_index()
x86/32: Remove lazy GS macros
ELF: Remove elf_core_copy_kernel_regs()
x86/32: Simplify ELF_CORE_COPY_REGS
This patch adds a new miscdevice to expose some Ultravisor functions
to userspace. Userspace can send IOCTLs to the uvdevice that will then
emit a corresponding Ultravisor Call and hands the result over to
userspace. The uvdevice is available if the Ultravisor Call facility is
present.
Userspace can call the Retrieve Attestation Measurement
Ultravisor Call using IOCTLs on the uvdevice.
The uvdevice will do some sanity checks first.
Then, copy the request data to kernel space, build the UVCB,
perform the UV call, and copy the result back to userspace.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/kvm/20220516113335.338212-1-seiden@linux.ibm.com/
Message-Id: <20220516113335.338212-1-seiden@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> (whitespace and tristate fixes, pick)
With CONFIG_GENERIC_BUG_RELATIVE_POINTERS, the addr/file relative
pointers are calculated weirdly: based on the beginning of the bug_entry
struct address, rather than their respective pointer addresses.
Make the relative pointers less surprising to both humans and tools by
calculating them the normal way.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Link: https://lkml.kernel.org/r/f0e05be797a16f4fc2401eeb88c8450dcbe61df6.1652362951.git.jpoimboe@kernel.org
clang fails to handle ".if" statements in inline assembly which are heavily
used in the alternatives code.
To work around this remove this code, and enforce that users of
alternatives must specify original and alternative instruction sequences
which have identical sizes. Add a compile time check with two ".org"
statements similar to arm64.
In result not only clang can handle this, but also quite a lot of code can
be removed.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1356
Link: https://lore.kernel.org/r/20220511120532.2228616-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Explicitly provide identical sized original/alternative instruction
sequences. This way there is no need for the s390 specific alternatives
infrastructure to generate padding sequences.
The code which generates such sequences will be removed with a follow on
patch.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220511120532.2228616-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Patch series "Fix CONT-PTE/PMD size hugetlb issue when unmapping or migrating", v4.
presently, migrating a hugetlb page or unmapping a poisoned hugetlb page,
we'll use ptep_clear_flush() and set_pte_at() to nuke the page table entry
and remap it, and this is incorrect for CONT-PTE or CONT-PMD size hugetlb
page, which will cause potential data consistent issue. This patch set
will change to use hugetlb related APIs to fix this issue.
Note: Mike pointed out the huge_ptep_get() will only return the one
specific value, and it would not take into account the dirty or young bits
of CONT-PTE/PMDs like the huge_ptep_get_and_clear() [1]. This
inconsistent issue is not introduced by this patch set, and this issue
will be addressed in another thread [2]. Meanwhile the uffd for hugetlb
case [3] pointed out by Gerald also needs another patch to address.
[1] https://lore.kernel.org/linux-mm/85bd80b4-b4fd-0d3f-a2e5-149559f2f387@oracle.com/
[2] https://lore.kernel.org/all/cover.1651998586.git.baolin.wang@linux.alibaba.com/
[3] https://lore.kernel.org/linux-mm/20220503120343.6264e126@thinkpad/
This patch (of 3):
It is incorrect to use ptep_clear_flush() to nuke a hugetlb page table
when unmapping or migrating a hugetlb page, and will change to use
huge_ptep_clear_flush() instead in the following patches.
So this is a preparation patch, which changes the huge_ptep_clear_flush()
to return the original pte to help to nuke a hugetlb page table.
[baolin.wang@linux.alibaba.com: fix build in several more architectures]
Link: https://lkml.kernel.org/r/0009a4cd-2826-e8be-e671-f050d4f18d5d@linux.alibaba.com
[sfr@canb.auug.org.au: fixup]
Link: https://lkml.kernel.org/r/20220511181531.7f27a5c1@canb.auug.org.au
Link: https://lkml.kernel.org/r/cover.1652270205.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/20f77ddab90baa249bd24504c413189b82acde69.1652270205.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/cover.1652147571.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/dcf065868cce35bceaf138613ad27f17bb7c0c19.1652147571.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Rich Felker <dalias@libc.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
S390x defines a get_cycles() function, but it does not do the usual
`#define get_cycles get_cycles` dance, making it impossible for generic
code to see if an arch-specific function was defined. While the
get_cycles() ifdef is not currently used, the following timekeeping
patch in this series will depend on the macro existing (or not existing)
when defining random_get_entropy().
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
They will be used in the follow up patches to either check/set/clear
uffd-wp bit of a huge pte.
So far it reuses all the small pte helpers. Archs can overwrite these
versions when necessary (with __HAVE_ARCH_HUGE_PTE_UFFD_WP* macros) in the
future.
Link: https://lkml.kernel.org/r/20220405014858.14531-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "userfaultfd-wp: Support shmem and hugetlbfs", v8.
Overview
========
Userfaultfd-wp anonymous support was merged two years ago. There're quite
a few applications that started to leverage this capability either to take
snapshots for user-app memory, or use it for full user controled swapping.
This series tries to complete the feature for uffd-wp so as to cover all
the RAM-based memory types. So far uffd-wp is the only missing piece of
the rest features (uffd-missing & uffd-minor mode).
One major reason to do so is that anonymous pages are sometimes not
satisfying the need of applications, and there're growing users of either
shmem and hugetlbfs for either sharing purpose (e.g., sharing guest mem
between hypervisor process and device emulation process, shmem local live
migration for upgrades), or for performance on tlb hits.
All these mean that if a uffd-wp app wants to switch to any of the memory
types, it'll stop working. I think it's worthwhile to have the kernel to
cover all these aspects.
This series chose to protect pages in pte level not page level.
One major reason is safety. I have no idea how we could make it safe if
any of the uffd-privileged app can wr-protect a page that any other
application can use. It means this app can block any process potentially
for any time it wants.
The other reason is that it aligns very well with not only the anonymous
uffd-wp solution, but also uffd as a whole. For example, userfaultfd is
implemented fundamentally based on VMAs. We set flags to VMAs showing the
status of uffd tracking. For another per-page based protection solution,
it'll be crossing the fundation line on VMA-based, and it could simply be
too far away already from what's called userfaultfd.
PTE markers
===========
The patchset is based on the idea called PTE markers. It was discussed in
one of the mm alignment sessions, proposed starting from v6, and this is
the 2nd version of it using PTE marker idea.
PTE marker is a new type of swap entry that is ony applicable to file
backed memories like shmem and hugetlbfs. It's used to persist some
pte-level information even if the original present ptes in pgtable are
zapped.
Logically pte markers can store more than uffd-wp information, but so far
only one bit is used for uffd-wp purpose. When the pte marker is
installed with uffd-wp bit set, it means this pte is wr-protected by uffd.
It solves the problem on e.g. file-backed memory mapped ptes got zapped
due to any reason (e.g. thp split, or swapped out), we can still keep the
wr-protect information in the ptes. Then when the page fault triggers
again, we'll know this pte is wr-protected so we can treat the pte the
same as a normal uffd wr-protected pte.
The extra information is encoded into the swap entry, or swp_offset to be
explicit, with the swp_type being PTE_MARKER. So far uffd-wp only uses
one bit out of the swap entry, the rest bits of swp_offset are still
reserved for other purposes.
There're two configs to enable/disable PTE markers:
CONFIG_PTE_MARKER
CONFIG_PTE_MARKER_UFFD_WP
We can set !PTE_MARKER to completely disable all the PTE markers, along
with uffd-wp support. I made two config so we can also enable PTE marker
but disable uffd-wp file-backed for other purposes. At the end of current
series, I'll enable CONFIG_PTE_MARKER by default, but that patch is
standalone and if anyone worries about having it by default, we can also
consider turn it off by dropping that oneliner patch. So far I don't see
a huge risk of doing so, so I kept that patch.
In most cases, PTE markers should be treated as none ptes. It is because
that unlike most of the other swap entry types, there's no PFN or block
offset information encoded into PTE markers but some extra well-defined
bits showing the status of the pte. These bits should only be used as
extra data when servicing an upcoming page fault, and then we behave as if
it's a none pte.
I did spend a lot of time observing all the pte_none() users this time.
It is indeed a challenge because there're a lot, and I hope I didn't miss
a single of them when we should take care of pte markers. Luckily, I
don't think it'll need to be considered in many cases, for example: boot
code, arch code (especially non-x86), kernel-only page handlings (e.g.
CPA), or device driver codes when we're tackling with pure PFN mappings.
I introduced pte_none_mostly() in this series when we need to handle pte
markers the same as none pte, the "mostly" is the other way to write
"either none pte or a pte marker".
I didn't replace pte_none() to cover pte markers for below reasons:
- Very rare case of pte_none() callers will handle pte markers. E.g., all
the kernel pages do not require knowledge of pte markers. So we don't
pollute the major use cases.
- Unconditionally change pte_none() semantics could confuse people, because
pte_none() existed for so long a time.
- Unconditionally change pte_none() semantics could make pte_none() slower
even if in many cases pte markers do not exist.
- There're cases where we'd like to handle pte markers differntly from
pte_none(), so a full replace is also impossible. E.g. khugepaged should
still treat pte markers as normal swap ptes rather than none ptes, because
pte markers will always need a fault-in to merge the marker with a valid
pte. Or the smap code will need to parse PTE markers not none ptes.
Patch Layout
============
Introducing PTE marker and uffd-wp bit in PTE marker:
mm: Introduce PTE_MARKER swap entry
mm: Teach core mm about pte markers
mm: Check against orig_pte for finish_fault()
mm/uffd: PTE_MARKER_UFFD_WP
Adding support for shmem uffd-wp:
mm/shmem: Take care of UFFDIO_COPY_MODE_WP
mm/shmem: Handle uffd-wp special pte in page fault handler
mm/shmem: Persist uffd-wp bit across zapping for file-backed
mm/shmem: Allow uffd wr-protect none pte for file-backed mem
mm/shmem: Allows file-back mem to be uffd wr-protected on thps
mm/shmem: Handle uffd-wp during fork()
Adding support for hugetlbfs uffd-wp:
mm/hugetlb: Introduce huge pte version of uffd-wp helpers
mm/hugetlb: Hook page faults for uffd write protection
mm/hugetlb: Take care of UFFDIO_COPY_MODE_WP
mm/hugetlb: Handle UFFDIO_WRITEPROTECT
mm/hugetlb: Handle pte markers in page faults
mm/hugetlb: Allow uffd wr-protect none ptes
mm/hugetlb: Only drop uffd-wp special pte if required
mm/hugetlb: Handle uffd-wp during fork()
Misc handling on the rest mm for uffd-wp file-backed:
mm/khugepaged: Don't recycle vma pgtable if uffd-wp registered
mm/pagemap: Recognize uffd-wp bit for shmem/hugetlbfs
Enabling of uffd-wp on file-backed memory:
mm/uffd: Enable write protection for shmem & hugetlbfs
mm: Enable PTE markers by default
selftests/uffd: Enable uffd-wp for shmem/hugetlbfs
Tests
=====
- Compile test on x86_64 and aarch64 on different configs
- Kernel selftests
- uffd-test [0]
- Umapsort [1,2] test for shmem/hugetlb, with swap on/off
[0] https://github.com/xzpeter/clibs/tree/master/uffd-test
[1] https://github.com/xzpeter/umap-apps/tree/peter
[2] https://github.com/xzpeter/umap/tree/peter-shmem-hugetlbfs
This patch (of 23):
Introduces a new swap entry type called PTE_MARKER. It can be installed
for any pte that maps a file-backed memory when the pte is temporarily
zapped, so as to maintain per-pte information.
The information that kept in the pte is called a "marker". Here we define
the marker as "unsigned long" just to match pgoff_t, however it will only
work if it still fits in swp_offset(), which is e.g. currently 58 bits on
x86_64.
A new config CONFIG_PTE_MARKER is introduced too; it's by default off. A
bunch of helpers are defined altogether to service the rest of the pte
marker code.
[peterx@redhat.com: fixup]
Link: https://lkml.kernel.org/r/Yk2rdB7SXZf+2BDF@xz-m1.local
Link: https://lkml.kernel.org/r/20220405014646.13522-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20220405014646.13522-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
gcc 12 does not (always) optimize away code that should only be generated
if parameters are constant and within in a certain range. This depends on
various obscure kernel config options, however in particular
PROFILE_ALL_BRANCHES can trigger this compile error:
In function ‘__atomic_add_const’,
inlined from ‘__preempt_count_add.part.0’ at ./arch/s390/include/asm/preempt.h:50:3:
./arch/s390/include/asm/atomic_ops.h:80:9: error: impossible constraint in ‘asm’
80 | asm volatile( \
| ^~~
Workaround this by simply disabling the optimization for
PROFILE_ALL_BRANCHES, since the kernel will be so slow, that this
optimization won't matter at all.
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
clock_delta is declared as unsigned long in various places. However,
the clock sync delta can be negative. This would add a huge positive
offset in clock_sync_global where clock_delta is added to clk.eitod
which is a 72 bit integer. Declare it as signed long to fix this.
Cc: stable@vger.kernel.org
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The size of the TOD offset field in the stp info response is 64 bits.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Bit 52 and bit 55 don't have to be zero: they only trigger a
translation-specifiation exception if the PTE is marked as valid, which is
not the case for swap ptes.
Document which bits are used for what, and which ones are unused.
Link: https://lkml.kernel.org/r/20220329164329.208407-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
PMU device driver perf_pai_crypto supports Processor Activity
Instrumentation (PAI), available with IBM z16:
- maps a full page to lowcore address 0x1500.
- uses CR0 bit 13 to turn PAI crypto counting on and off.
- creates a sample with raw data on each context switch out when
at context switch some mapped counters have a value of nonzero.
This device driver only supports CPU wide context, no task context
is allowed.
Support for counting:
- one or more counters can be specified using
perf stat -e pai_crypto/xxx/
where xxx stands for the counter event name. Multiple invocation
of this command is possible. The counter names are listed in
/sys/devices/pai_crypto/events directory.
- one special counters can be specified using
perf stat -e pai_crypto/CRYPTO_ALL/
which returns the sum of all incremented crypto counters.
- one event pai_crypto/CRYPTO_ALL/ is reserved for sampling.
No multiple invocations are possible. The event collects data at
context switch out and saves them in the ring buffer.
Add qpaci assembly instruction to query supported memory mapped crypto
counters. It returns the number of counters (no holes allowed in that
range).
The PAI crypto counter events are system wide and can not be executed
in parallel. Therefore some restrictions documented in function
paicrypt_busy apply.
In particular event CRYPTO_ALL for sampling must run exclusive.
Only counting events can run in parallel.
PAI crypto counter events can not be created when a CPU hot plug
add is processed. This means a CPU hot plug add does not get
the necessary PAI event to record PAI cryptography counter increments
on the newly added CPU. CPU hot plug remove removes the event and
terminates the counting of PAI counters immediately.
Co-developed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20220504062351.2954280-3-tmricht@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
arch_check_user_regs() is used at the moment to verify that struct pt_regs
contains valid values when entering the kernel from userspace. s390 needs
a place in the generic entry code to modify a cpu data structure when
switching from userspace to kernel mode. As arch_check_user_regs() is
exactly this, rename it to arch_enter_from_user_mode().
When entering the kernel from userspace, arch_check_user_regs() is
used to verify that struct pt_regs contains valid values. Note that
the NMI codepath doesn't call this function. s390 needs a place in the
generic entry code to modify a cpu data structure when switching from
userspace to kernel mode. As arch_check_user_regs() is exactly this,
rename it to arch_enter_from_user_mode().
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220504062351.2954280-2-tmricht@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The short psw definitions are contained in compat header files, however
short psws are not compat specific. Therefore move the definitions to
ptrace header file. This also gets rid of a compat header include in kvm
code.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
LLVM's integrated assembler does not like comments within macros:
<instantiation>:3:19: error: too many positional arguments
GR_NUM b2, 1 /* Base register */
^
Remove them, since they are obvious anyway.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use local labels in .set directives to avoid potential compile errors
with LTO + clang. See commit 334865b291 ("x86/extable: Prefer local
labels in .set directives") for further details.
Since s390 doesn't support LTO currently this doesn't fix a real bug
for now, but helps to avoid problems as soon as required pieces have
been added to llvm.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use local labels in .set directives to avoid potential compile errors
with LTO + clang. See commit 334865b291 ("x86/extable: Prefer local
labels in .set directives") for further details.
Since s390 doesn't support LTO currently this doesn't fix a real bug
for now, but helps to avoid problems as soon as required pieces have
been added to llvm.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Provide a single common definition for the compat_flock and
compat_flock64 structures using the same tricks as for the native
variants. Another extra define is added for the packing required on
x86.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Link: https://lore.kernel.org/r/20220405071314.3225832-4-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The F_GETLK64/F_SETLK64/F_SETLKW64 fcntl opcodes are only implemented
for the 32-bit syscall APIs, but are also needed for compat handling
on 64-bit kernels.
Consolidate them in unistd.h instead of definining the internal compat
definitions in compat.h, which is rather error prone (e.g. parisc
gets the values wrong currently).
Note that before this change they were never visible to userspace due
to the fact that CONFIG_64BIT is only set for kernel builds.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220405071314.3225832-3-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
test_barrier fails on s390 because of the missing KCSAN instrumentation
for several synchronization primitives.
Add it to barriers by defining __mb(), __rmb(), __wmb(), __dma_rmb()
and __dma_wmb(), and letting the common code in asm-generic/barrier.h
do the rest.
Spinlocks require instrumentation only on the unlock path; notify KCSAN
that the CPU cannot move memory accesses outside of the spin lock. In
reality it also cannot move stores inside of it, but this is not
important and can be omitted.
Reported-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Currently it is not detectable from within Linux when PCI instructions
are retried because of a busy condition. Detecting such conditions and
especially how long they lasted can however be quite useful in problem
determination. This patch enables this by adding an s390dbf error log
when a CC 2 is first encountered as well as after the retried
instruction.
Despite being unlikely it may be possible that these added debug
messages drown out important other messages so allow setting the debug
level in zpci_err_insn*() and set their level to 1 so they can be
filtered out if need be.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
In the current code vdso is mapped below the stack. This is
problematic when programs mapped to the top of the address space
are allocating a lot of memory, because the heap will clash with
the vdso. To avoid this map the vdso above the stack and move
STACK_TOP so that it all fits into three level paging.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This is a preparation patch for adding vdso randomization to s390.
It adds a function vdso_size(), which will be used later in calculating
the STACK_TOP value. It also moves the vdso mapping into a new function
vdso_map(), to keep the code similar to other architectures.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch tries to fix as much as possible of the
checkpatch.pl --strict findings:
CHECK: Logical continuations should be on the previous line
CHECK: No space is necessary after a cast
CHECK: Alignment should match open parenthesis
CHECK: 'useable' may be misspelled - perhaps 'usable'?
WARNING: Possible repeated word: 'is'
CHECK: spaces preferred around that '*' (ctx:VxV)
CHECK: Comparison to NULL could be written "!msg"
CHECK: Prefer kzalloc(sizeof(*zc)...) over kzalloc(sizeof(struct...)...)
CHECK: Unnecessary parentheses around resp_type->work
CHECK: Avoid CamelCase: <xcRB>
There is no functional change comming with this patch, only
code cleanup, renaming, whitespaces, indenting, ... but no
semantic change in any way. Also the API (zcrypt and pkey
header file) is semantically unchanged.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch does a little cleanup on the CPRBX struct
in zcrypt.h and the redundant CPRB struct definition in
zcrypt_msgtype6.c. Especially some of the misleading
fields from the CPRBX struct have been removed.
There is no semantic change coming with this patch.
The field names changed in the XCRB struct are only related
to reserved fields which should never been used.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fix the following coccicheck warnings:
./arch/s390/include/asm/scsw.h:695:47-49: WARNING
!A || A && B is equivalent to !A || B
I apply a readable version just to get rid of a warning.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Link: https://lore.kernel.org/r/1649297808-5048-1-git-send-email-baihaowen@meizu.com
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
