Fix an issue with commit 1ce849c755 ("x86/PCI: Add support for the ALi
M1487 (IBC) PIRQ router") and correct ALi M1487 (IBC) PIRQ router link
value (`pirq' cookie) interpretation according to findings in the BIOS.
Credit to Nikolai Zhubr for the detective work as to the bit layout.
Fixes: 1ce849c755 ("x86/PCI: Add support for the ALi M1487 (IBC) PIRQ router")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203310013270.44113@angie.orcam.me.uk
Handle the $IRT PCI IRQ Routing Table format used by AMI for its BCP
(BIOS Configuration Program) external tool meant for tweaking BIOS
structures without the need to rebuild it from sources[1].
The $IRT format has been invented by AMI before Microsoft has come up
with its $PIR format and a $IRT table is therefore there in some systems
that lack a $PIR table, such as the DataExpert EXP8449 mainboard based
on the ALi FinALi 486 chipset (M1489/M1487), which predates DMI 2.0 and
cannot therefore be easily identified at run time.
Unlike with the $PIR format there is no alignment guarantee as to the
placement of the $IRT table, so scan the whole BIOS area bytewise.
Credit to Michal Necasek for helping me chase documentation for the
format.
References:
[1] "What is BCP? - AMI", <https://www.ami.com/what-is-bcp/>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # crosvm
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203302228410.9038@angie.orcam.me.uk
PIRQ routing tables provided by the PCI BIOS usually specify the PCI
vendor:device ID as well as the bus address of the device implementing
the PIRQ router, e.g.:
PCI: Interrupt Routing Table found at 0xc00fde10
[...]
PCI: Attempting to find IRQ router for [8086:7000]
pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7000]
however in some cases they do not, in which case we fail to match the
router handler, e.g.:
PCI: Interrupt Routing Table found at 0xc00fdae0
[...]
PCI: Attempting to find IRQ router for [0000:0000]
PCI: Interrupt router not found at 00:00
This is because we always match the vendor:device ID and the bus address
literally, even if they are all zeros.
Handle this case then and iterate over all PCI devices until we find a
matching router handler if the vendor ID given by the routing table is
the invalid value of zero:
PCI: Attempting to find IRQ router for [0000:0000]
PCI: Trying IRQ router for [1039:0496]
pci 0000:00:05.0: SiS85C497 IRQ router [1039:0496]
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nikolai Zhubr <zhubr.2@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203302018570.9038@angie.orcam.me.uk
Verify that the PCI IRQ Routing Table header as well as individual slot
entries are all wholly contained within the BIOS memory area. Do not
even call the checksum calculator if the header would overrun the area
and then bail out early if any slot would.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301735510.22465@angie.orcam.me.uk
The SiS 85C496/497 486 Green PC VESA/ISA/PCI Chipset has support for PCI
steering and the ELCR register implemented. These features are handled
by the SiS85C497 AT Bus Controller & Megacell (ATM) ISA bridge, however
the device is wired as a peer bridge directly to the host bus and has
its PCI configuration registers decoded at addresses 0x80-0xff by the
accompanying SiS85C496 PCI & CPU Memory Controller (PCM) host bridge[1].
Therefore we need to match on the host bridge's vendor and device ID.
Like with the SiS85C503 PIRQ router handle link value ranges of 1-4 and
0xc0-0xc3, corresponding respectively to PIRQ line numbers counted from
1 and link register PCI configuration space addresses.
References:
[1] "486 Green PC VESA/ISA/PCI Chipset, SiS 85C496/497", Rev 3.0,
Silicon Integrated Systems Corp., July 1995, Part IV, Section 3.
"PCI Configuration Space Registers (00h ~ FFh)", p. 114
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nikolai Zhubr <zhubr.2@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301610490.22465@angie.orcam.me.uk
In preparation to adding support for the SiS85C497 PIRQ router add `503'
to the names of SiS85C503 PIRQ router code entities so that they clearly
indicate which device they refer to.
Also restructure `sis_router_probe' such that new device IDs will be
just new switch cases.
No functional change.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301610000.22465@angie.orcam.me.uk
Similarly to MP-tables PIRQ routing tables may not list devices behind
PCI-to-PCI bridges, leading to interrupt routing failures, e.g.:
pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7000]
pci 0000:02:00.0: ignoring bogus IRQ 255
pci 0000:02:01.0: ignoring bogus IRQ 255
pci 0000:02:02.0: ignoring bogus IRQ 255
pci 0000:04:00.0: ignoring bogus IRQ 255
pci 0000:04:00.3: ignoring bogus IRQ 255
pci 0000:00:11.0: PCI INT A -> PIRQ 63, mask deb8, excl 0c20
pci 0000:00:11.0: PCI INT A -> newirq 0
PCI: setting IRQ 11 as level-triggered
pci 0000:00:11.0: found PCI INT A -> IRQ 11
pci 0000:00:11.0: sharing IRQ 11 with 0000:00:07.2
pci 0000:02:00.0: PCI INT A not found in routing table
pci 0000:02:01.0: PCI INT A not found in routing table
pci 0000:02:02.0: PCI INT A not found in routing table
pci 0000:04:00.0: PCI INT A not found in routing table
pci 0000:04:00.3: PCI INT D not found in routing table
pci 0000:06:05.0: PCI INT A not found in routing table
pci 0000:06:08.0: PCI INT A not found in routing table
pci 0000:06:08.1: PCI INT B not found in routing table
pci 0000:06:08.2: PCI INT C not found in routing table
and consequently non-working devices. Since PCI-to-PCI bridges have a
standardised way of routing interrupts by the means of swizzling do it
for configurations that use a PIRQ router as well, like with APIC-based
setups, and use the determined corresponding topmost bridge's interrupt
pin assignment to route a given device's interrupt:
pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7000]
pci 0000:02:00.0: ignoring bogus IRQ 255
pci 0000:02:01.0: ignoring bogus IRQ 255
pci 0000:02:02.0: ignoring bogus IRQ 255
pci 0000:04:00.0: ignoring bogus IRQ 255
pci 0000:04:00.3: ignoring bogus IRQ 255
pci 0000:00:11.0: PCI INT A -> PIRQ 63, mask deb8, excl 0c20
pci 0000:00:11.0: PCI INT A -> newirq 0
PCI: setting IRQ 11 as level-triggered
pci 0000:00:11.0: found PCI INT A -> IRQ 11
pci 0000:00:11.0: sharing IRQ 11 with 0000:00:07.2
pci 0000:02:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:00:11.0: sharing IRQ 11 with 0000:02:00.0
pci 0000:02:01.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:02:02.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:04:00.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:04:00.3: using bridge 0000:00:11.0 INT A to get INT D
pci 0000:00:11.0: sharing IRQ 11 with 0000:04:00.3
pci 0000:06:05.0: using bridge 0000:00:11.0 INT D to get INT A
pci 0000:06:08.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:06:08.1: using bridge 0000:00:11.0 INT D to get INT B
pci 0000:06:08.2: using bridge 0000:00:11.0 INT A to get INT C
pci 0000:00:11.0: sharing IRQ 11 with 0000:06:08.2
pci 0000:02:01.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:02:01.0: PCI INT A -> PIRQ 60, mask deb8, excl 0c20
pci 0000:02:01.0: PCI INT A -> newirq 0
PCI: setting IRQ 10 as level-triggered
pci 0000:02:01.0: found PCI INT A -> IRQ 10
pci 0000:02:01.0: sharing IRQ 10 with 0000:00:14.0
pci 0000:02:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:02:01.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:02:02.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:04:00.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:02:01.0: sharing IRQ 10 with 0000:04:00.0
pci 0000:04:00.3: using bridge 0000:00:11.0 INT A to get INT D
pci 0000:06:05.0: using bridge 0000:00:11.0 INT D to get INT A
pci 0000:06:08.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:06:08.1: using bridge 0000:00:11.0 INT D to get INT B
pci 0000:06:08.2: using bridge 0000:00:11.0 INT A to get INT C
pci 0000:02:02.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:02:02.0: PCI INT A -> PIRQ 61, mask deb8, excl 0c20
pci 0000:02:02.0: PCI INT A -> newirq 0
PCI: setting IRQ 5 as level-triggered
pci 0000:02:02.0: found PCI INT A -> IRQ 5
pci 0000:02:02.0: sharing IRQ 5 with 0000:00:13.0
pci 0000:02:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:02:01.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:02:02.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:04:00.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:04:00.3: using bridge 0000:00:11.0 INT A to get INT D
pci 0000:06:05.0: using bridge 0000:00:11.0 INT D to get INT A
pci 0000:06:08.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:02:02.0: sharing IRQ 5 with 0000:06:08.0
pci 0000:06:08.1: using bridge 0000:00:11.0 INT D to get INT B
pci 0000:06:08.2: using bridge 0000:00:11.0 INT A to get INT C
pci 0000:06:05.0: using bridge 0000:00:11.0 INT D to get INT A
pci 0000:06:05.0: PCI INT A -> PIRQ 62, mask deb8, excl 0c20
pci 0000:06:05.0: PCI INT A -> newirq 0
pci 0000:06:05.0: found PCI INT A -> IRQ 5
pci 0000:06:05.0: sharing IRQ 5 with 0000:00:12.0
pci 0000:02:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:02:01.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:02:02.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:04:00.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:04:00.3: using bridge 0000:00:11.0 INT A to get INT D
pci 0000:06:05.0: using bridge 0000:00:11.0 INT D to get INT A
pci 0000:06:08.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:06:08.1: using bridge 0000:00:11.0 INT D to get INT B
pci 0000:06:05.0: sharing IRQ 5 with 0000:06:08.1
pci 0000:06:08.2: using bridge 0000:00:11.0 INT A to get INT C
Adjust log messages accordingly.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301538440.22465@angie.orcam.me.uk
Contrary to the PCI BIOS specification[1] some systems include the PCI
function number for onboard devices in their $PIR table. Consequently
the wrong entry can be matched leading to interrupt routing failures.
For example the Tyan Tomcat IV S1564D board has:
00:07.1 slot=00
0:00/deb8
1:00/deb8
2:00/deb8
3:00/deb8
00:07.2 slot=00
0:00/deb8
1:00/deb8
2:00/deb8
3:63/deb8
for its IDE interface and USB controller functions of the 82371SB PIIX3
southbridge. Consequently the first entry matches causing the inability
to route the USB interrupt in the `noapic' mode, in which case we need
to rely on the interrupt line set by the BIOS:
uhci_hcd 0000:00:07.2: runtime IRQ mapping not provided by arch
uhci_hcd 0000:00:07.2: PCI INT D not routed
uhci_hcd 0000:00:07.2: enabling bus mastering
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00006000
Try to match the PCI device and function combined then and if that fails
move on to PCI device matching only. Compliant systems will only have a
single $PIR table entry per PCI device, so this update does not change
the semantics with them, while systems that have several entries for
individual functions of a single PCI device each will match the correct
entry:
uhci_hcd 0000:00:07.2: runtime IRQ mapping not provided by arch
uhci_hcd 0000:00:07.2: PCI INT D -> PIRQ 63, mask deb8, excl 0c20
uhci_hcd 0000:00:07.2: PCI INT D -> newirq 11
uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 11
uhci_hcd 0000:00:07.2: sharing IRQ 11 with 0000:00:11.0
uhci_hcd 0000:00:07.2: enabling bus mastering
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00006000
[1] "PCI BIOS Specification", Revision 2.1, PCI Special Interest Group,
August 26, 1994, Table 4-1 "Layout of IRQ routing table entry.", p.
12
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301536020.22465@angie.orcam.me.uk
Contrary to the PCI BIOS specification[1] some systems include the PCI
function number for motherboard devices in their $PIR table, e.g. this
is what the Tyan Tomcat IV S1564D board reports:
00:14 slot=01
0:60/deb8
1:61/deb8
2:62/deb8
3:63/deb8
00:13 slot=02
0:61/deb8
1:62/deb8
2:63/deb8
3:60/deb8
00:12 slot=03
0:62/deb8
1:63/deb8
2:60/deb8
3:61/deb8
00:11 slot=04
0:63/deb8
1:60/deb8
2:61/deb8
3:62/deb8
00:07 slot=00
0:00/deb8
1:00/deb8
2:00/deb8
3:00/deb8
00:07 slot=00
0:00/deb8
1:00/deb8
2:00/deb8
3:63/deb8
Print the function number then in the debug $PIR table dump:
00:14.0 slot=01
0:60/deb8
1:61/deb8
2:62/deb8
3:63/deb8
00:13.0 slot=02
0:61/deb8
1:62/deb8
2:63/deb8
3:60/deb8
00:12.0 slot=03
0:62/deb8
1:63/deb8
2:60/deb8
3:61/deb8
00:11.0 slot=04
0:63/deb8
1:60/deb8
2:61/deb8
3:62/deb8
00:07.1 slot=00
0:00/deb8
1:00/deb8
2:00/deb8
3:00/deb8
00:07.2 slot=00
0:00/deb8
1:00/deb8
2:00/deb8
3:63/deb8
References:
[1] "PCI BIOS Specification", Revision 2.1, PCI Special Interest Group,
August 26, 1994, Table 4-1 "Layout of IRQ routing table entry.", p.
12
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301534440.22465@angie.orcam.me.uk
It makes no sense to hide the address of the $PIR table in a debug dump:
PCI: Interrupt Routing Table found at 0x(ptrval)
let alone print its virtual address, given that this is a BIOS entity at
a fixed location in the system's memory map. Show the physical address
instead then, e.g.:
PCI: Interrupt Routing Table found at 0xfde10
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301532330.22465@angie.orcam.me.uk
Define PIC_ELCR1 and PIC_ELCR2 macros for accesses to the ELCR registers
implemented by many chipsets in their embedded 8259A PIC cores, avoiding
magic numbers that are difficult to handle, and complementing the macros
we already have for registers originally defined with discrete 8259A PIC
implementations. No functional change.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2107200237300.9461@angie.orcam.me.uk
The Intel 82426EX ISA Bridge (IB), a part of the Intel 82420EX PCIset,
implements PCI interrupt steering with a PIRQ router in the form of two
PIRQ Route Control registers, available in the PCI configuration space
at locations 0x66 and 0x67 for the PIRQ0# and PIRQ1# lines respectively.
The semantics is the same as with the PIIX router, however it is not
clear if BIOSes use register indices or line numbers as the cookie to
identify PCI interrupts in their routing tables and therefore support
either scheme.
The IB is directly attached to the Intel 82425EX PCI System Controller
(PSC) component of the chipset via a dedicated PSC/IB Link interface
rather than the host bus or PCI. Therefore it does not itself appear in
the PCI configuration space even though it responds to configuration
cycles addressing registers it implements. Use 82425EX's identification
then for determining the presence of the IB.
References:
[1] "82420EX PCIset Data Sheet, 82425EX PCI System Controller (PSC) and
82426EX ISA Bridge (IB)", Intel Corporation, Order Number:
290488-004, December 1995, Section 3.3.18 "PIRQ1RC/PIRQ0RC--PIRQ
Route Control Registers", p. 61
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2107200213490.9461@angie.orcam.me.uk
The Intel 82374EB/82374SB EISA System Component (ESC) devices implement
PCI interrupt steering with a PIRQ router[1] in the form of four PIRQ
Route Control registers, available in the port I/O space accessible
indirectly via the index/data register pair at 0x22/0x23, located at
indices 0x60/0x61/0x62/0x63 for the PIRQ0/1/2/3# lines respectively.
The semantics is the same as with the PIIX router, however it is not
clear if BIOSes use register indices or line numbers as the cookie to
identify PCI interrupts in their routing tables and therefore support
either scheme.
Accesses to the port I/O space concerned here need to be unlocked by
writing the value of 0x0f to the ESC ID Register at index 0x02
beforehand[2]. Do so then and then lock access after use for safety.
This locking could possibly interfere with accesses to the Intel MP spec
IMCR register, implemented by the 82374SB variant of the ESC only as the
PCI/APIC Control Register at index 0x70[3], for which leaving access to
the configuration space concerned unlocked may have been a requirement
for the BIOS to remain compliant with the MP spec. However we only poke
at the IMCR register if the APIC mode is used, in which case the PIRQ
router is not, so this arrangement is not going to interfere with IMCR
access code.
The ESC is implemented as a part of the combined southbridge also made
of 82375EB/82375SB PCI-EISA Bridge (PCEB) and does itself appear in the
PCI configuration space. Use the PCEB's device identification then for
determining the presence of the ESC.
References:
[1] "82374EB/82374SB EISA System Component (ESC)", Intel Corporation,
Order Number: 290476-004, March 1996, Section 3.1.12
"PIRQ[0:3]#--PIRQ Route Control Registers", pp. 44-45
[2] same, Section 3.1.1 "ESCID--ESC ID Register", p. 36
[3] same, Section 3.1.17 "PAC--PCI/APIC Control Register", p. 47
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2107192023450.9461@angie.orcam.me.uk
The ALi M1487 ISA Bus Controller (IBC), a part of the ALi FinALi 486
chipset, implements PCI interrupt steering with a PIRQ router[1] in the
form of four 4-bit mappings, spread across two PCI INTx Routing Table
Mapping Registers, available in the port I/O space accessible indirectly
via the index/data register pair at 0x22/0x23, located at indices 0x42
and 0x43 for the INT1/INT2 and INT3/INT4 lines respectively.
Additionally there is a separate PCI INTx Sensitivity Register at index
0x44 in the same port I/O space, whose bits 3:0 select the trigger mode
for INT[4:1] lines respectively[2]. Manufacturer's documentation says
that this register has to be set consistently with the relevant ELCR
register[3]. Add a router-specific hook then and use it to handle this
register.
Accesses to the port I/O space concerned here need to be unlocked by
writing the value of 0xc5 to the Lock Register at index 0x03
beforehand[4]. Do so then and then lock access after use for safety.
The IBC is implemented as a peer bridge on the host bus rather than a
southbridge on PCI and therefore it does not itself appear in the PCI
configuration space. It is complemented by the M1489 Cache-Memory PCI
Controller (CMP) host-to-PCI bridge, so use that device's identification
for determining the presence of the IBC.
References:
[1] "M1489/M1487: 486 PCI Chip Set", Version 1.2, Acer Laboratories
Inc., July 1997, Section 4: "Configuration Registers", pp. 76-77
[2] same, p. 77
[3] same, Section 5: "M1489/M1487 Software Programming Guide", pp.
99-100
[4] same, Section 4: "Configuration Registers", p. 37
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2107191702020.9461@angie.orcam.me.uk
In pcibios_irq_init(), the PCI IRQ routing table 'pirq_table' is first
found through pirq_find_routing_table(). If the table is not found and
CONFIG_PCI_BIOS is defined, the table is then allocated in
pcibios_get_irq_routing_table() using kmalloc(). Later, if the I/O APIC is
used, this table is actually not used. In that case, the allocated table
is not freed, which is a memory leak.
Free the allocated table if it is not used.
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
[bhelgaas: added Ingo's reviewed-by, since the only change since v1 was to
use the irq_routing_table local variable name he suggested]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Use domain number of 0 as the domain number is not available in struct
irq_routing_table.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
... and __initconst if applicable.
Based on similar work for an older kernel in the Grsecurity patch.
[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
991de2e590 ("PCI, x86: Implement pcibios_alloc_irq() and
pcibios_free_irq()") appeared in v4.3 and helps support IOAPIC hotplug.
Олег reported that the Elcus-1553 TA1-PCI driver worked in v4.2 but not
v4.3 and bisected it to 991de2e590. Sunjin reported that the RocketRAID
272x driver worked in v4.2 but not v4.3. In both cases booting with
"pci=routirq" is a workaround.
I think the problem is that after 991de2e590, we no longer call
pcibios_enable_irq() for upstream bridges. Prior to 991de2e590, when a
driver called pci_enable_device(), we recursively called
pcibios_enable_irq() for upstream bridges via pci_enable_bridge().
After 991de2e590, we call pcibios_enable_irq() from pci_device_probe()
instead of the pci_enable_device() path, which does *not* call
pcibios_enable_irq() for upstream bridges.
Revert 991de2e590 to fix these driver regressions.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211
Fixes: 991de2e590 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()")
Reported-and-tested-by: Олег Мороз <oleg.moroz@mcc.vniiem.ru>
Reported-by: Sunjin Yang <fan4326@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
CC: Jiang Liu <jiang.liu@linux.intel.com>
Revert 811a4e6fce ("PCI: Add helpers to manage pci_dev->irq and
pci_dev->irq_managed").
This is part of reverting 991de2e590 ("PCI, x86: Implement
pcibios_alloc_irq() and pcibios_free_irq()") to fix regressions it
introduced.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211
Fixes: 991de2e590 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
CC: Jiang Liu <jiang.liu@linux.intel.com>
Add pci_has_managed_irq(), pci_set_managed_irq(), and
pci_reset_managed_irq() to simplify code. No functional change.
[bhelgaas: changelog]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
To support IOAPIC hotplug, we need to allocate PCI IRQ resources on demand
and free them when not used anymore.
Implement pcibios_alloc_irq() and pcibios_free_irq() to dynamically
allocate and free PCI IRQs.
Remove mp_should_keep_irq(), which is no longer used.
[bhelgaas: changelog]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
This routine has been around for over a decade, but with EISA
being dead and abandoned for about twice that long, the name can
be kind of confusing. The function is going at the PIC Edge/Level
Configuration Registers (ELCR), so rename it as such and mentally
decouple it from the long since dead EISA bus.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Len Brown <len.brown@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1431217657-934-1-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Commit b4b55cda58 (Refine the way to release PCI IRQ resources)
introduced a regression in the PCI IRQ resource management by causing
the IRQ resource of a device, established when pci_enabled_device()
is called on a fully disabled device, to be released when the driver
is unbound from the device, regardless of the enable_cnt.
This leads to the situation that an ill-behaved driver can now make a
device unusable to subsequent drivers by an imbalance in their use of
pci_enable/disable_device(). That is a serious problem for secondary
drivers like vfio-pci, which are innocent of the transgressions of
the previous driver.
Since the solution of this problem is not immediate and requires
further discussion, revert commit b4b55cda58 and the issue it was
supposed to address (a bug related to xen-pciback) will be taken
care of in a different way going forward.
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some PCI device drivers assume that pci_dev->irq won't change after
calling pci_disable_device() and pci_enable_device() during suspend and
resume.
Commit c03b3b0738 ("x86, irq, mpparse: Release IOAPIC pin when
PCI device is disabled") frees PCI IRQ resources when pci_disable_device()
is called and reallocate IRQ resources when pci_enable_device() is
called again. This breaks above assumption. So commit 3eec595235
("x86, irq, PCI: Keep IRQ assignment for PCI devices during
suspend/hibernation") and 9eabc99a63 ("x86, irq, PCI: Keep IRQ
assignment for runtime power management") fix the issue by avoiding
freeing/reallocating IRQ resources during PCI device suspend/resume.
They achieve this by checking dev.power.is_prepared and
dev.power.runtime_status. PM maintainer, Rafael, then pointed out that
it's really an ugly fix which leaking PM internal state information to
IRQ subsystem.
Recently David Vrabel <david.vrabel@citrix.com> also reports an
regression in pciback driver caused by commit cffe0a2b5a ("x86, irq:
Keep balance of IOAPIC pin reference count"). Please refer to:
http://lkml.org/lkml/2015/1/14/546
So this patch refine the way to release PCI IRQ resources. Instead of
releasing PCI IRQ resources in pci_disable_device()/
pcibios_disable_device(), we now release it at driver unbinding
notification BUS_NOTIFY_UNBOUND_DRIVER. In other word, we only release
PCI IRQ resources when there's no driver bound to the PCI device, and
it keeps the assumption that pci_dev->irq won't through multiple
invocation of pci_enable_device()/pci_disable_device().
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull x86 apic updates from Thomas Gleixner:
"After stopping the full x86/apic branch, I took some time to go
through the first block of patches again, which are mostly cleanups
and preparatory work for the irqdomain conversion and ioapic hotplug
support.
Unfortunaly one of the real problematic commits was right at the
beginning, so I rebased this portion of the pending patches without
the offenders.
It would be great to get this into 3.19. That makes reworking the
problematic parts simpler. The usual tip testing did not unearth any
issues and it is fully bisectible now.
I'm pretty confident that this wont affect the calmness of the xmas
season.
Changes:
- Split the convoluted io_apic.c code into domain specific parts
(vector, ioapic, msi, htirq)
- Introduce proper helper functions to retrieve irq specific data
instead of open coded dereferencing of pointers
- Preparatory work for ioapic hotplug and irqdomain conversion
- Removal of the non functional pci-ioapic driver
- Removal of unused irq entry stubs
- Make native_smp_prepare_cpus() preemtible to avoid GFP_ATOMIC
allocations for everything which is called from there.
- Small cleanups and fixes"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
iommu/amd: Use helpers to access irq_cfg data structure associated with IRQ
iommu/vt-d: Use helpers to access irq_cfg data structure associated with IRQ
x86: irq_remapping: Use helpers to access irq_cfg data structure associated with IRQ
x86, irq: Use helpers to access irq_cfg data structure associated with IRQ
x86, irq: Make MSI and HT_IRQ indepenent of X86_IO_APIC
x86, irq: Move IRQ initialization routines from io_apic.c into vector.c
x86, irq: Move IOAPIC related declarations from hw_irq.h into io_apic.h
x86, irq: Move HT IRQ related code from io_apic.c into htirq.c
x86, irq: Move PCI MSI related code from io_apic.c into msi.c
x86, irq: Replace printk(KERN_LVL) with pr_lvl() utilities
x86, irq: Make UP version of irq_complete_move() an inline stub
x86, irq: Move local APIC related code from io_apic.c into vector.c
x86, irq: Introduce helpers to access struct irq_cfg
x86, irq: Protect __clear_irq_vector() with vector_lock
x86, irq: Rename local APIC related functions in io_apic.c as apic_xxx()
x86, irq: Refine hw_irq.h to prepare for irqdomain support
x86, irq: Convert irq_2_pin list to generic list
x86, irq: Kill useless parameter 'irq_attr' of IO_APIC_get_PCI_irq_vector()
x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI
x86, irq: Introduce helper to check whether an IOAPIC has been registered
...
None of the callers requires irq_attr to be filled
in. IO_APIC_get_PCI_irq_vector() does not do anything useful with it
either.
Remove the parameter and fixup the call sites.
[ tglx: Massaged changelog ]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Ryan Desfosses <ryan@desfo.org>
Cc: Quentin Lambert <lambert.quentin@gmail.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: http://lkml.kernel.org/r/1414397531-28254-4-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To keep balance of IOAPIC pin reference count, we need to protect
pirq_enable_irq(), acpi_pci_irq_enable() and intel_mid_pci_irq_enable()
from reentrance. There are two cases which will cause reentrance.
The first case is caused by suspend/hibernation. If pcibios_disable_irq
is called during suspending/hibernating, we don't release the assigned
IRQ number, otherwise it may break the suspend/hibernation. So late when
pcibios_enable_irq is called during resume, we shouldn't allocate IRQ
number again.
The second case is that function acpi_pci_irq_enable() may be called
twice for PCI devices present at boot time as below:
1) pci_acpi_init()
--> acpi_pci_irq_enable() if pci_routeirq is true
2) pci_enable_device()
--> pcibios_enable_device()
--> acpi_pci_irq_enable()
We can't kill kernel parameter pci_routeirq yet because it's still
needed for debugging purpose.
So flag irq_managed is introduced to track whether IRQ number is
assigned by OS and to protect pirq_enable_irq(), acpi_pci_irq_enable()
and intel_mid_pci_irq_enable() from reentrance.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/1414387308-27148-13-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
While f3761db164 ("x86, irq: Fix build error caused by
9eabc99a635a77cbf09") addressed the original build problem,
declaration, inline stub, and definition still seem misplaced: It isn't
really IO-APIC related, and it's being used solely in arch/x86/pci/.
This also means stubbing it out when !CONFIG_X86_IO_APIC was at least
questionable.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Link: http://lkml.kernel.org/r/545747BE020000780004436E@mail.emea.novell.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Now IOAPIC driver dynamically allocates IRQ numbers for IOAPIC pins.
We need to keep IRQ assignment for PCI devices during runtime power
management, otherwise it may cause failure of device wakeups.
Commit 3eec595235 "x86, irq, PCI: Keep IRQ assignment for PCI
devices during suspend/hibernation" has fixed the issue for suspend/
hibernation, we also need the same fix for runtime device sleep too.
Fix: https://bugzilla.kernel.org/show_bug.cgi?id=83271
Reported-and-Tested-by: EmanueL Czirai <amanual@openmailbox.org>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: EmanueL Czirai <amanual@openmailbox.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Grant Likely <grant.likely@linaro.org>
Link: http://lkml.kernel.org/r/1409304383-18806-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Now IOAPIC driver dynamically allocates IRQ numbers for IOAPIC pins.
We need to keep IRQ assignment for PCI devices during suspend/hibernation,
otherwise it may cause failure of suspend/hibernation due to:
1) Device driver calls pci_enable_device() to allocate an IRQ number
and register interrupt handler on the returned IRQ.
2) Device driver's suspend callback calls pci_disable_device() and
release assigned IRQ in turn.
3) Device driver's resume callback calls pci_enable_device() to
allocate IRQ number again. A different IRQ number may be assigned
by IOAPIC driver this time.
4) Now the hardware delivers interrupt to the new IRQ but interrupt
handler is still registered against the old IRQ, so it breaks
suspend/hibernation.
To fix this issue, we keep IRQ assignment during suspend/hibernation.
Flag pci_dev.dev.power.is_prepared is used to detect that
pci_disable_device() is called during suspend/hibernation.
Reported-and-Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/1407478071-29399-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Release IOAPIC pin associated with PCI device when the PCI device
is disabled.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1402302011-23642-40-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Refine mpparse to use common irqdomain map interface to program IOAPIC pins,
so we can unify the callsite to progam IOAPIC pins.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1402302011-23642-32-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Nobody really uses the return value of pcibios_scan_root() (one place uses
it to control a printk, but the printk is not very useful). This converts
pcibios_scan_root() to a void function.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
pcibios_scan_root() looks up the bus's NUMA node, then calls
pci_scan_bus_on_node(). This uses pcibios_scan_root() directly and drops
the node lookup in the callers.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds the LPC Controller DeviceIDs for the Intel Panther Point PCH.
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This patch adds the LPC Controller DeviceIDs for the Intel DH89xxCC PCH.
The code for capturing ranges of LPC Controller DeviceIDs has also been updated.
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This patch updates the defines for Intel devices in
include/linux/pci_ids.h, referenced in arch/x86/pci/irq.c and
drivers/i2c/busses/i2c-i801.c, reflecting approved legal branding, and
using fuller code-names for products under development.
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This patch adds the LPC Controller DeviceIDs for the Intel Patsburg PCH.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This patch adds additional LPC Controller DeviceIDs for the Intel Cougar
Point PCH.
The DeviceIDs are defined and referenced as a range of values, the same
way Ibex Peak was implemented.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Platforms like Moorestown want to override the pcibios_fixup_irqs
default function. Add it to x86_init.pci.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D00@orsmsx508.amr.corp.intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Moorestown wants to reuse pcibios_init_irq but needs to provide its
own implementation of pci_enable_irq. After we distangled the init we
can move the init_irq call to x86_init and remove the pci_enable_irq
!= NULL check in pcibios_init_irq. pci_enable_irq is compile time
initialized to pirq_enable_irq and the special cases which override it
(visws and acpi) set the x86_init function pointer to noop. That
allows MSRT to override pci_enable_irq and otherwise run
pcibios_init_irq unmodified.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFF@orsmsx508.amr.corp.intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
according to Ingo, io_apic irq-setup related functions have too many
parameters with a repetitive signature.
So reduce related funcs to get less params by passing a pointer
to a newly defined io_apic_irq_attr structure.
v2: io_apic_irq ==> irq_attr
triggering ==> trigger
v3: add set_io_apic_irq_attr
[ Impact: cleanup ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A08ACD3.2070401@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So we can set io apic routing only when enabling the device irq.
This is advantageous for IRQ descriptor allocation affinity: if we set up
the IO-APIC entry later, we have a chance to allocate the IRQ descriptor
later and know which device it is on and can set affinity accordingly.
[ Impact: standardize/enhance irq-enabling sequence for mptable irqs ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A01C46E.8000501@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
