Commit graph

132 commits

Author SHA1 Message Date
Linus Torvalds
c7a6ced9d8 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds
Pull LED subsystem update from Bryan Wu.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (24 commits)
  leds: add output driver configuration for pca9633 led driver
  leds: lm3642: Use regmap_update_bits() in lm3642_chip_init()
  leds: Add new LED driver for lm3642 chips
  leds-lp5523: Fix riskiness of the page fault
  leds-lp5523: turn off the LED engines on unloading the driver
  leds-lm3530: Fix smatch warnings
  leds-lm3530: Use devm_regulator_get function
  leds: leds-gpio: adopt pinctrl support
  leds: Add new LED driver for lm355x chips
  leds-lp5523: use the i2c device id rather than fixed name
  leds-lp5523: add new device id for LP55231
  leds-lp5523: support new LP55231 device
  leds: triggers: send uevent when changing triggers
  leds-lp5523: minor code style fixes
  leds-lp5523: change the return type of lp5523_set_mode()
  leds-lp5523: set the brightness to 0 forcely on removing the driver
  leds-lp5523: add channel name in the platform data
  leds: leds-gpio: Use of_get_child_count() helper
  leds: leds-gpio: Use platform_{get,set}_drvdata
  leds: leds-gpio: use of_match_ptr()
  ...
2012-10-10 20:14:07 +09:00
G.Shark Jeong
8b7cfbec05 leds: Add new LED driver for lm3642 chips
This driver is a general version for LM642 led chip of TI.

LM3642 :
The LM3642 is a 4MHz fixed-frequency synchronous boost
converter plus 1.5A constant current driver for a high-current
white LED.
The LM3642 is controlled via an I2C-compatible interface.

Signed-off-by: G.Shark Jeong <gshark.jeong@gmail.com>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-13 11:56:41 +08:00
G.Shark Jeong
b98d13c725 leds: Add new LED driver for lm355x chips
This driver is a general version for LM355x,lm3554 and lm3556,led chips of TI.

LM3554 :
The LM3554 is a 2 MHz fixed-frequency synchronous boost
converter with 1.2A dual high side led drivers.
Datasheet: www.ti.com/lit/ds/symlink/lm3554.pdf

LM3556 :
The LM3556 is a 4 MHz fixed-frequency synchronous boost
converter plus 1.5A constant current driver for a high-current white LED.
Datasheet: www.national.com/ds/LM/LM3556.pdf

(bryan.wu@canonical.com: use flush_work() to replace flush_work_sync() which is
deprecated)

Signed-off-by: G.Shark Jeong <gshark.jeong@gmail.com>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11 18:32:43 +08:00
Kim, Milo
ca70532168 leds-lp5523: support new LP55231 device
New TI LP55231 device has same I2C register layout as LP5523. Therefore,
all of LED operations can be shared with the LP5523 driver.

To support new LP55231 device explicitly, the device description
is added in the configuration file.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11 18:32:42 +08:00
Arnd Bergmann
19e4ab54e7 Merge branch 'for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds into next/drivers
From Bryan Wu <bryan.wu@canonical.com>:

Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a
new generic led trigger for CPU not only for ARM but also for others.

For enabling CPU idle event, CPU arch code should call ledtrig_cpu() stub to
trigger idle start or idle end event.

These patches convert old style LED driver in arch/arm to gpio_led or new led
driver interface. Against 3.5 release and build successfully for all the machines.

Test ledtrig-cpu driver on OMAP4 Panda board.

v9 --> v10
 * fix compiling issue on versatile_defconfig reported by Russell King
 * rebase to 3.5 kernel and move patches to new git tree

v8 --> v9:
 * use mutex to replace rw_sema pointed out by Tim Gardner
 * add a new struct led_trigger_cpu
 * add lock_is_inited to record mutex lock initialization

v6 --> v7:
 * add a patch to unify the led-trigger name
 * fix some typo pointed
 * use BUG_ON to detect CPU numbers during building stage

v5 --> v6:
 * replace  __get_cpu_var() to per_cpu()
 * remove smp_processor_id() which is wrong with for_each_possible_cpu()
 * test on real OMAP4 Panda board
 * add comments about CPU hotplug in the CPU LED trigger driver

v4 --> v5:
 * rebase all the patches on top of latest linux-next
 * replace on_each_cpu() with for_each_possible_cpu()
 * add some description of ledtrig_cpu() API
 * remove old leds code from driver nwflash.c, which should use a new led trigger then
 * this trigger driver can be built as module now

v3 --> v4:
 * fix a typo pointed by Jochen Friedrich
 * fix some building errors
 * add Reviewed-by and Tested-by into patch log

v2 --> v3:
 * almost rewrote the whole ledtrig-cpu driver, which is more simple
 * every CPU will have a per-CPU trigger
 * cpu trigger can be assigned to any leds
 * fix a lockdep issue in led-trigger common code
 * other fix according to review

v1 --> v2:
 * remove select operations in Kconfig of every machines
 * add back supporting of led in core module of mach-integrator
 * solidate name scheme in ledtrig-cpu.c
 * add comments of CPU_LED_* cpu led events
 * fold patches of RealView and Versatile together
 * add machine_is_ check during assabet led driver init
 * add some Acked-by in patch logs
 * remove code for simpad machine in machine-sa11000, since Jochen Friedrich
   introduced gpiolib and gpio-led driver for simpad
 * on Assabet and Netwinder machine, LED operations is reversed like:
   setting bit means turn off leds
   clearing bit means turn on leds
 * add a new function to read CM_CTRL register for led driver

* 'for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  ARM: use new LEDS CPU trigger stub to replace old one
  ARM: mach-sa1100: retire custom LED code
  ARM: mach-omap1: retire custom LED code
  ARM: mach-pnx4008: remove including old leds event API header file
  ARM: plat-samsung: remove including old leds event API header file
  ARM: mach-pxa: retire custom LED code
  char: nwflash: remove old led event code
  ARM: mach-footbridge: retire custom LED code
  ARM: mach-ebsa110: retire custom LED code
  ARM: mach-clps711x: retire custom LED code of P720T machine
  ARM: mach-integrator: retire custom LED code
  ARM: mach-integrator: move CM_CTRL to header file for accessing by other functions
  ARM: mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger
  ARM: mach-shark: retire custom LED code
  ARM: mach-ks8695: remove leds driver, since nobody use it
  ARM: mach-realview and mach-versatile: retire custom LED code
  ARM: at91: convert old leds drivers to gpio_led and led_trigger drivers
  led-triggers: create a trigger for CPU activity

Conflicts:
	arch/arm/mach-clps711x/p720t.c
	arch/arm/mach-sa1100/leds-cerf.c
	arch/arm/mach-sa1100/leds-lart.c

Let's hope this is the last time we pull this and it doesn't cause
more trouble. I have verified that version 10 causes no build
warnings or errors any more, and the patches still look good.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-13 16:45:48 +02:00
Bryan Wu
8f88731d05 led-triggers: create a trigger for CPU activity
Attempting to consolidate the ARM LED code, this removes the
custom RealView LED trigger code to turn LEDs on and off in
response to CPU activity and replace it with a standard trigger.

(bryan.wu@canonical.com:
It introduces several syscore stubs into this trigger.
It also provides ledtrig_cpu trigger event stub in <linux/leds.h>.
Although it was inspired by ARM work, it can be used in other arch.)

Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Tested-by: Jochen Friedrich <jochen@scram.de>
2012-07-31 21:23:31 +08:00
Kim, Milo
eb80411b54 leds: add new lp8788 led driver
TI LP8788 PMU has the current sink as the keyboard led driver.
The brightness is controlled by the i2c commands.
Configurable parameters can be defined in the platform side.

Patch v2.
(a) use workqueue on changing the brightness

(b) use mutex_lock/unlock when the brightness is set
    and the led block of lp8788 device is enabled

(c) remove err_dev on _probe()
    : just return as returned value if any errors

(d) replace module_init/exit() with module_platform_driver()

(e) add led configuration structure and loading them by default
    if platform data is null

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-26 12:04:33 +08:00
Jan-Simon Möller
b54cf35a7f LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERS
Add driver for BlinkM device to drivers/leds/.
Add entry to MAINTAINERS file.
Add documentation in Documentation/leds/.

A BlinkM is a RGB LED controlled through I2C.

This driver implements an interface to the LED framework
and another sysfs group to access the internal options
of the BlinkM.

rev6: Use module_i2c_driver().
rev5: Removed own workqueue in favor of events wq.
rev4: Fixed comments by Bryan Wu.
rev3: Fixed issues found by Jonathan Neuschäfer.

(bryan.wu@canonical.com: remove 2 trailing whitespace)

Signed-off-by: Jan-Simon Möller <jansimon.moeller@gmx.de>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-24 16:00:51 +08:00
G.Shark Jeong
32abb4788d leds: Add LED driver for lm3556 chip
LM3556 :
The LM3556 is a 4 MHz fixed-frequency synchronous boost
converter plus 1.5A constant current driver for a high-current white LED.
Datasheet: www.national.com/ds/LM/LM3556.pdf

Tested on OMAP4430

(bryan.wu@canonical.com: use module_i2c_driver() rather than
lm3556_init/lm3556_exit for code simplicity; fixed some typo
pointed out by Rob Landley)

Signed-off-by: G.Shark Jeong <gshark.jeong@gmail.com>
Reviewed-by: Axel Lin <axel.lin@gmail.com>
Reviewed-by: Kim, Milo <Milo.Kim@ti.com>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-24 07:52:35 +08:00
Jesper Dangaard Brouer
dff67758c1 leds: correct trivial type in drivers/leds/Kconfig
Correct "hadrware" to "hardware", for LEDS_TRIGGER_TRANSIENT.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-24 07:52:35 +08:00
Fabio Baltieri
5e417281cd leds: add oneshot trigger
Add oneshot trigger to blink a led with configurale parameters via
sysfs.

Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Cc: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-24 07:52:34 +08:00
Axel Lin
9473c4c167 leds: Make LEDS_ASIC3 and LEDS_RENESAS_TPU depend on LEDS_CLASS=y
Otherwise, I got below build error when CONFIG_LEDS_CLASS=m.

  LD      init/built-in.o
drivers/built-in.o: In function `asic3_led_probe':
clkdev.c:(.devinit.text+0x4680): undefined reference to `led_classdev_register'
drivers/built-in.o: In function `r_tpu_probe':
clkdev.c:(.devinit.text+0x4838): undefined reference to `led_classdev_register'
drivers/built-in.o: In function `asic3_led_remove':
clkdev.c:(.devexit.text+0x564): undefined reference to `led_classdev_unregister'
drivers/built-in.o: In function `r_tpu_remove':
clkdev.c:(.devexit.text+0x5a0): undefined reference to `led_classdev_unregister'
make: *** [vmlinux] Error 1

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-06-12 10:56:25 +08:00
Johan Hovold
401dea7f7a leds: add LM3533 LED driver
Add sub-driver for the LEDs on National Semiconductor / TI LM3533 lighting
power chips.

The chip provides 256 brightness levels, hardware accelerated blinking as
well as ambient-light-sensor and pwm input control.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Rob Landley <rob@landley.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:32 -07:00
Shuah Khan
44e1e9f8e7 leds: add new transient trigger for one shot timer activation
The leds timer trigger does not currently have an interface to activate a
one shot timer.  The current support allows for setting two timers, one
for specifying how long a state to be on, and the second for how long the
state to be off.  The delay_on value specifies the time period an LED
should stay in on state, followed by a delay_off value that specifies how
long the LED should stay in off state.  The on and off cycle repeats until
the trigger gets deactivated.  There is no provision for one time
activation to implement features that require an on or off state to be
held just once and then stay in the original state forever.

Without one shot timer interface, user space can still use timer trigger
to set a timer to hold a state, however when user space application
crashes or goes away without deactivating the timer, the hardware will be
left in that state permanently.

As a specific example of this use-case, let's look at vibrate feature on
phones.  Vibrate function on phones is implemented using PWM pins on SoC
or PMIC.  There is a need to activate one shot timer to control the
vibrate feature, to prevent user space crashes leaving the phone in
vibrate mode permanently causing the battery to drain.

This trigger exports three properties, activate, state, and duration When
transient trigger is activated these properties are set to default values.

- duration allows setting timer value in msecs. The initial value is 0.
- activate allows activating and deactivating the timer specified by
  duration as needed. The initial and default value is 0.  This will allow
  duration to be set after trigger activation.
- state allows user to specify a transient state to be held for the specified
  duration.

Signed-off-by: Shuah Khan <shuahkhan@gmail.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: NeilBrown <neilb@suse.de>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:32 -07:00
David Dajun Chen
5ba736311b leds: driver for DA9052/53 PMIC v2
LED Driver for Dialog Semiconductor DA9052/53 PMICs.

[akpm@linux-foundation.org: make led_reg static]
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:31 -07:00
Linus Torvalds
1bfecd9358 ARM: board specific updates
These changes are all specific to one board only. We're trying to keep
 the number of board files low, but generally board level updates are
 ok on platforms that are working on moving towards DT based probing,
 which will eventually lead to removing them.
 
 The board-ams-delta.c board file gets a conflict between the removal of
 ams_delta_config and the addition of a lot of other data. The Kconfig
 file has two changes in the same line, and in exynos, the power domain
 cleanup conflicts with the addition of the image sensor device.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 [olof: Amended a fix for a mismerge to board-omap4panda.c]
 Signed-off-by: Olof Johansson <olof@lixom.net>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPckIXAAoJEIwa5zzehBx35uUP/jns0renNAMmiu2vBHGQtn4z
 xiNXjDTJ8DeD4mKf17rjn/uaJgQ0w3Doq2nEsi5rPqLK4Uqqk+NG1zYa77QBWHbx
 FUgBPz+oViTDkanp4G8cygXvGfNkb1GvuJxEBvxQ1mwuG4JhwlFbQxGIaS8ZwOAN
 DIyVCgSXy40B+748RwdZ2AY7CYvWiQWrQYsIH6NO0rtZIXjyV0kIsyVtEXZpqWtF
 xNz2HHXVMrui2JQ7FQ0zZglY8+YCxjeJk4v++FfqCJiMzU1yZJw7E30NjhcWAaR6
 odJM2YIyhvunxPfx3ZUHimsNjfU+l/0uXgDHeLFSWVyIjPFXwqZDi/6onP3FI4Jc
 sIoTSwDAQpnZJ6KffAYkcyyfsWN61GOE96Xa2eRb6+78CEiMh7vJ8TIRieiOWxjm
 NbB0xzaKxa97F/8z7w6V6Z4dNhnokWJZvtJdgLZUYAqIgnxstFkJZ9+Tqt77G4t3
 5iSbIMeFPsfh5sUeAVjr5+zVeUOm9PTRI0n0RY+Wd16Ke6DO1qobKAYOzrzI5idz
 k7ni76/zgGn3NS5F3TxdRHowkeGUwUU6poyopgQ0pyscDylVpzgMIqmAwLdzrVp5
 joVEoKi6h4oqhAZtiysXuF85bUfCW0ziDUuib07SX8wcEIAIr+mWob1Ei+wJrefe
 g0Ch3ZbCRQMOwSOQ70Ci
 =HPiJ
 -----END PGP SIGNATURE-----

Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: board specific updates" from Arnd Bergmann/Olof Johansson:
 "These changes are all specific to one board only.  We're trying to
  keep the number of board files low, but generally board level updates
  are ok on platforms that are working on moving towards DT based
  probing, which will eventually lead to removing them.

  The board-ams-delta.c board file gets a conflict between the removal
  of ams_delta_config and the addition of a lot of other data.  The
  Kconfig file has two changes in the same line, and in exynos, the
  power domain cleanup conflicts with the addition of the image sensor
  device.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>
  [olof: Amended a fix for a mismerge to board-omap4panda.c]
  Signed-off-by: Olof Johansson <olof@lixom.net>"

Fixed up some fairly trivial conflicts manually.

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (82 commits)
  i.MX35-PDK: Add Camera support
  ARM : mx35: 3ds-board: add framebuffer device
  pxa/hx4700: Remove pcmcia platform_device structure
  ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35%
  ARM: pxa/hx4700: Remove unwanted request for GPIO105
  ARM: EXYNOS: support Exynos4210-bus Devfreq driver on Nuri board
  ARM: EXYNOS: Register JPEG on nuri
  ARM: EXYNOS: Register JPEG on universal_c210
  ARM: S5PV210: Enable JPEG on SMDKV210
  ARM: S5PV210: Add JPEG board definition
  ARM: EXYNOS: Enable JPEG on Origen
  ARM: EXYNOS: Enable JPEG on SMDKV310
  ARM: EXYNOS: Add __init attribute to universal_camera_init()
  ARM: EXYNOS: Add __init attribute to nuri_camera_init()
  ARM: S5PV210: Enable FIMC on SMDKC110
  ARM: S5PV210: Enable FIMC on SMDKV210
  ARM: S5PV210: Enable MFC on SMDKC110
  ARM: S5PV210: Enable MFC on SMDKV210
  ARM: EXYNOS: Enable G2D on SMDKV310
  ARM: tegra: update defconfig
  ...
2012-03-27 16:27:28 -07:00
Linus Torvalds
d61b7a572b ARM: global cleanups
Quite a bit of code gets removed, and some stuff moved around, mostly
 the old samsung s3c24xx stuff. There should be no functional changes
 in this series otherwise. Some cleanups have dependencies on other
 arm-soc branches and will be sent in the second round.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUAT2pCjGCrR//JCVInAQLd8RAAqCxhzSc4ewTUP/974gVhujj3TrpiEQcS
 FKvYWF76yP38Lbf3CJZBZaONRtrQNOhYpVQ0jb3WCV4F8mEH9PCes2q9RObeBYiY
 TNX8VdcuVjX2U9HaH0+RQtBUdujNLHpEOqtO57un7T5UDNssR5JOive1tNAooRv1
 pL0Hgx3AVqUbNOPpqQqHzy/MDdd67S6dX80yysANjFGMX87Nvp/ztYAdNnIdta+Z
 pDJt+DPlmK8LvjoSL3SEUN0p3Thk75621cCuauGq88PLIB2w62tzF0NFFbvIAgJT
 3aMlHM2flOiTJAWkUvA8zJiUzwv/0vYvH3xPoTo84abve3lVfZcY+fHNcfxE/Gge
 ri2MmkHyimVP3rNeyM0GbN1RTej1TN1MezeQW3nq2wP6nvS2k0/t32ObLLtWU7XA
 6iA0hKVMSnhqj4ln6jPAmyaDkaWHyYz97urhgetHqGadvLTiGPXCSBPalSiFmyMo
 11tvuqwUNz9tw4nsvGboFQwS2ZoVquC5inoHp5seqZETkGCB67JyeRGxtAM4gbP/
 wIRa3OBLY99yo1on6QovWNnSOMC6X4cOvBI/qHIjSEY/T9JVkslY87gRg3LkxCBR
 XpXfZ6iuLHoSRUGcIjE8D6KHjMgWIDPRnLkIliK4H+3Jn08g0R1MxCplevFCRtis
 egswZ8C24Xw=
 =o5Xl
 -----END PGP SIGNATURE-----

Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: global cleanups" from Arnd Bergmann:
 "Quite a bit of code gets removed, and some stuff moved around, mostly
  the old samsung s3c24xx stuff.  There should be no functional changes
  in this series otherwise.  Some cleanups have dependencies on other
  arm-soc branches and will be sent in the second round.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>"

Fixed up trivial conflicts mainly due to #include's being changes on
both sides.

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits)
  ep93xx: Remove unnecessary includes of ep93xx-regs.h
  ep93xx: Move EP93XX_SYSCON defines to SoC private header
  ep93xx: Move crunch code to mach-ep93xx directory
  ep93xx: Make syscon access functions private to SoC
  ep93xx: Configure GPIO ports in core code
  ep93xx: Move peripheral defines to local SoC header
  ep93xx: Convert the watchdog driver into a platform device.
  ep93xx: Use ioremap for backlight driver
  ep93xx: Move GPIO defines to gpio-ep93xx.h
  ep93xx: Don't use system controller defines in audio drivers
  ep93xx: Move PHYS_BASE defines to local SoC header file
  ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver
  ARM: EXYNOS: add clock registers for exynos4x12-cpufreq
  PM / devfreq: update the name of EXYNOS clock registers that were omitted
  PM / devfreq: update the name of EXYNOS clock register
  ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock
  ARM: EXYNOS: use static declaration on regarding clock
  ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs
  ARM: OMAP2+: Fix build error after merge
  ARM: S3C24XX: remove call to s3c24xx_setup_clocks
  ...
2012-03-27 16:03:32 -07:00
Bryan Wu
a403d930c5 led-class: change back LEDS_CLASS to tristate instead of bool
After moving some core functions to led-core.c, led-class.c can be built
as module again.

Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:35 -07:00
Peter Meerwald
75cb2e1d1a drivers/leds: add driver for PCA9633 I2C chip
Driver for the PCA9633 I2C chip supporting four LEDs and 255 brightness
levels.

[akpm@linux-foundation.org: fix kcalloc() call]
[axel.lin@gmail.com: fix kcalloc parameters swapped]
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:35 -07:00
Kukjin Kim
880bcd4a83 Merge branch 'topic/cleanup-s3c24xx' into next/cleanup-s3c24xx
Conflicts:
	arch/arm/mach-s3c24xx/include/mach/system.h
2012-03-07 01:36:33 -08:00
Philip Prindeville
da4e330294 x86/geode/net5501: Add platform driver for Soekris Engineering net5501
Add platform driver for the Soekris Engineering net5501 single-board
computer.  Probes well-known locations in ROM for BIOS signature
to confirm correct platform.  Registers 1 LED and 1 GPIO-based
button (typically used for soft reset).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Andres Salomon <dilinger@queued.net>
Cc: Matthew Garrett <mjg@redhat.com>
[ Removed Kconfig and Makefile detritus from drivers/leds/]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-jv5uf34996juqh5syes8mn4h@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-06 09:23:56 +01:00
Kukjin Kim
b130d5c295 ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX
This patch changes the ARCH name to "ARCH_S3C24XX" for Samsung
S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443,
and S3C2450 SoCs so that we can merge the mach-xxx directories
and plat-s3c24xx dir. to just one mach-s3c24xx for them.

I think this should be sent to upstream via samsung tree because
this touches many samsung stuff.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
[for the gadget part:]
Acked-by: Felipe Balbi <balbi@ti.com>
[for the framebuffer (video) part:]
Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
[For the watchdog-part:]
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-03 07:44:51 +09:00
Arnd Bergmann
235ecf4c59 Merge branch 'omap1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards
* 'omap1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  input: serio: ams-delta: toggle keyboard power over GPIO
  omapfb: lcd_ams_delta: drive control lines over GPIO
  MTD: NAND: ams-delta: use GPIO instead of custom I/O
  LED: drop leds-ams-delta driver
  ARM: OMAP1: ams-delta: supersede custom led device by leds-gpio
  ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio
  ARM: OMAP1: ams-delta: register latch dependent devices later
2012-02-29 21:05:03 +00:00
Sebastian Andrzej Siewior
e9a4593cc5 leds: add led driver for Bachmann's ot200
Add support for leds on Bachmann's ot200 visualisation device.  The
device has three leds on the back panel (led_err, led_init and led_run)
and can handle up to seven leds on the front panel.

The driver was written by Linutronix on behalf of Bachmann electronic
GmbH.  It incorporates feedback from Lars-Peter Clausen

[akpm@linux-foundation.org: add dependency on HAS_IOMEM]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-23 08:38:47 -08:00
Tony Lindgren
967809bd7f Merge branch 'omap1-part2' into omap1
Conflicts:
	drivers/leds/leds-ams-delta.c
2012-01-20 05:31:52 -08:00
Linus Torvalds
21ebd6c68b Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits)
  rtc: max8925: Add function to work as wakeup source
  mfd: Add pm ops to max8925
  mfd: Convert aat2870 to dev_pm_ops
  mfd: Still check other interrupts if we get a wm831x touchscreen IRQ
  mfd: Introduce missing kfree in 88pm860x probe routine
  mfd: Add S5M series configuration
  mfd: Add s5m series irq driver
  mfd: Add S5M core driver
  mfd: Improve mc13xxx dt binding document
  mfd: Fix stmpe section mismatch
  mfd: Fix stmpe build warning
  mfd: Fix STMPE I2c build failure
  mfd: Constify aat2870-core i2c_device_id table
  gpio: Add support for stmpe variant 801
  mfd: Add support for stmpe variant 801
  mfd: Add support for stmpe variant 610
  mfd: Add support for STMPE SPI interface
  mfd: Separate out STMPE controller and interface specific code
  misc: Remove max8997-muic sysfs attributes
  mfd: Remove unused wm831x_irq_data_to_mask_reg()
  ...

Fix up trivial conflict in drivers/leds/Kconfig due to addition of
LEDS_MAX8997 and LEDS_TCA6507 next to each other.
2012-01-13 20:43:32 -08:00
NeilBrown
a6d511e515 leds: add driver for TCA6507 LED controller
TI's TCA6507 is the LED driver in the GTA04 Openmoko motherboard.  The
driver provides full support for brightness levels and hardware blinking.

This driver can drive each of 7 outputs as an LED or a GPIO output,
and provides hardware-assist blinking.

[akpm@linux-foundation.org: fix __mod_i2c_device_table alias]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 16:30:49 -08:00
Donggeun Kim
8584cb82f1 leds: Add suuport for MAX8997-LED driver
This patch enables LED controller in MAX8997 PMIC.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09 00:37:41 +01:00
Janusz Krzysztofik
f6fc8a6a1a LED: drop leds-ams-delta driver
This driver is no longer needed after the Amstrad Delta on-board LED
devices have been converted to leds-gpio compatible.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-22 08:59:49 -08:00
Paul Bolle
b12e2c12da leds: Kconfig: Fix typo 'D2NET_V2'
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-24 11:32:12 +01:00
Magnus Damm
f59b6f9f32 leds: Renesas TPU LED driver
Add V2 of the LED driver for a single timer channel for the TPU hardware
block commonly found in Renesas SoCs.

The driver has been written with optimal Power Management in mind, so to
save power the LED is driven as a regular GPIO pin in case of maximum
brightness and power off which allows the TPU hardware to be idle and
which in turn allows the clocks to be stopped and the power domain to be
turned off transparently.

Any other brightness level requires use of the TPU hardware in PWM mode.
TPU hardware device clocks and power are managed through Runtime PM.
System suspend and resume is known to be working - during suspend the LED
is set to off by the generic LED code.

The TPU hardware timer is equipeed with a 16-bit counter together with an
up-to-divide-by-64 prescaler which makes the hardware suitable for
brightness control.  Hardware blink is unsupported.

The LED PWM waveform has been verified with a Fluke 123 Scope meter on a
sh7372 Mackerel board.  Tested with experimental sh7372 A3SP power domain
patches.  Platform device bind/unbind tested ok.

V2 has been tested on the DS2 LED of the sh73a0-based AG5EVM.

[axel.lin@gmail.com: include linux/module.h]
Signed-off-by: Magnus Damm <damm@opensource.se>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:54 -07:00
Linus Torvalds
a93f3e9f42 Merge branch 'x86-geode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'x86-geode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: geode: New PCEngines Alix system driver
2011-10-28 05:04:26 -07:00
Paul Bolle
395cf9691d doc: fix broken references
There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.

Fix these broken references, sometimes by dropping the irrelevant text
they were part of.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-27 18:08:04 +02:00
Ed Wildgoose
d4f3e35017 x86: geode: New PCEngines Alix system driver
This new driver replaces the old PCEngines Alix 2/3 LED driver with a
new driver that controls the LEDs through the leds-gpio driver. The
old driver accessed GPIOs directly, which created a conflict and
prevented also loading the cs5535-gpio driver to read other GPIOs on
the Alix board. With this new driver, we hook into leds-gpio which in
turn uses GPIO to control the LEDs and therefore it's possible to
control both the LEDs and access onboard GPIOs

Driver is moved to platform/geode as requested by Grant and any other
geode initialisation modules should move here also

This driver is inspired by leds-net5501.c by Alessandro Zummo.

Ideally, leds-net5501.c should also be moved to platform/geode. 
Additionally the driver relies on parts of the patch: 7f131cf3ed ("leds:
leds-alix2c - take port address from MSR) by Daniel Mack to perform
detection of the Alix board.

[akpm@linux-foundation.org: include module.h]

Signed-off-by: Ed Wildgoose <kernel@wildgooses.com>
Cc: git@wildgooses.com
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-21 11:19:42 +02:00
Axel Lin
2504f6da50 drivers/leds/leds-netxbig: make LEDS_NETXBIG depend on LEDS_CLASS
We call led_classdev_register/led_classdev_unregister in
create_netxbig_led/delete_netxbig_led, thus make LEDS_NETXBIG depend on
LEDS_CLASS.

This patch fixes below build error if LEDS_CLASS is not configured.

    LD      .tmp_vmlinux1
  drivers/built-in.o: In function `create_netxbig_led':
  drivers/leds/leds-netxbig.c:350: undefined reference to `led_classdev_register'
  drivers/leds/leds-netxbig.c:361: undefined reference to `led_classdev_unregister'
  drivers/built-in.o: In function `delete_netxbig_led':
  drivers/leds/leds-netxbig.c:313: undefined reference to `led_classdev_unregister'

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:15 -07:00
Linus Torvalds
c7c8518498 Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: (61 commits)
  gpio/mxc/mxs: fix build error introduced by the irq_gc_ack() renaming
  mcp23s08: add i2c support
  mcp23s08: isolate spi specific parts
  mcp23s08: get rid of setup/teardown callbacks
  gpio/tegra: dt: add binding for gpio polarity
  mcp23s08: remove unused work queue
  gpio/da9052: remove a redundant assignment for gpio->da9052
  gpio/mxc: add device tree probe support
  ARM: mxc: use ARCH_NR_GPIOS to define gpio number
  gpio/mxc: get rid of the uses of cpu_is_mx()
  gpio/mxc: add missing initialization of basic_mmio_gpio shadow variables
  gpio: Move mpc5200 gpio driver to drivers/gpio
  GPIO: DA9052 GPIO module v3
  gpio/tegra: Use engineering names in DT compatible property
  of/gpio: Add new method for getting gpios under different property names
  gpio/dt: Refine GPIO device tree binding
  gpio/ml-ioh: fix off-by-one for displaying variable i in dev_err
  gpio/pca953x: Deprecate meaningless device-tree bindings
  gpio/pca953x: Remove dynamic platform data pointer
  gpio/pca953x: Fix IRQ support.
  ...
2011-07-22 14:50:57 -07:00
Eric Miao
45d16f09dd leds: fix the incorrect display in menuconfig
Seems when a config option does not have a dependency of the menuconfig,
it messes the display of the rest configs, even if it's a hidden one.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-15 20:04:01 -07:00
Uwe Kleine-König
be5ce2f1c9 leds: move LEDS_GPIO_REGISTER out of menuconfig NEW_LEDS
Commit 4440673a95 ("leds: provide helper to register "leds-gpio"
devices") broke the display of the NEW_LEDS menu as it didn't depend on
NEW_LEDS and so made "LED drivers" and "LED Triggers" appear at the same
level as "LED Support" instead of below it as it was before 4440673a.

Moving LEDS_GPIO_REGISTER out of the menuconfig NEW_LEDS fixes this
unintended side effect.

Reported-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-15 20:04:00 -07:00
Axel Lin
9d8f776bfb drivers/leds/leds-asic3: make LEDS_ASIC3 depend on LEDS_CLASS
We call led_classdev_unregister/led_classdev_register in
asic3_led_remove/asic3_led_probe, thus make LEDS_ASIC3 depend on
LEDS_CLASS.

This patch fixes below build error if LEDS_CLASS is not configured.

    LD      .tmp_vmlinux1
  drivers/built-in.o: In function `asic3_led_remove':
  clkdev.c:(.devexit.text+0x1860): undefined reference to `led_classdev_unregister'
  drivers/built-in.o: In function `asic3_led_probe':
  clkdev.c:(.devinit.text+0xcee8): undefined reference to `led_classdev_register'
  make: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Paul Parsons <lost.distance@yahoo.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-15 20:04:00 -07:00
Shawn Guo
2bcc7ed5b8 leds: remove config option LEDS_GPIO_PLATFORM from Kconfig
Since the commit a314c5c004
(leds/leds-gpio: merge platform_driver with of_platform_driver),
the config option LEDS_GPIO_PLATFORM becomes useless, so remove it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
[grant.likely: also remove LEDS_GPIO_OF for same reason]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-03 12:14:16 -06:00
Paul Parsons
7d9e7e9fbd leds: Add ASIC3 LED support
Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform.

Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26 19:45:46 +02:00
Uwe Kleine-König
4440673a95 leds: provide helper to register "leds-gpio" devices
This function makes a deep copy of the platform data to allow it to live
in init memory.  For a kernel that supports several machines and so
includes the definition for several leds-gpio devices this saves quite
some memory because all but one definition can be free'd after boot.

As the function is used by arch code it must be builtin and so cannot go
into leds-gpio.c.

[akpm@linux-foundation.org: s/CONFIG_LED_REGISTER_GPIO/CONFIG_LEDS_REGISTER_GPIO/]
Signed-off-by: Uwe Kleine-König  <u.kleine-koenig@pengutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: H Hartley Sweeten <hartleys@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:51 -07:00
Vasily Khoruzhick
402f758813 leds: remove the leds-h1940 driver
The H1940 machine now uses leds-gpio and leds-h1940 has no users anymore.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Cc: "Arnaud Patard (Rtp)" <arnaud.patard@rtp-net.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:51 -07:00
Joachim Eastwood
3c1ab50d0a drivers/leds/leds-pca9532.c: add gpio capability
Allow unused leds on pca9532 to be used as gpio.  The board I am working
on now has no less than 6 pca9532 chips.  One chips is used for only leds,
one has 14 leds and 2 gpio and the rest of the chips are gpio only.

There is also one board in mainline which could use this capabilty;
arch/arm/mach-iop32x/n2100.c
 232         {       .type = PCA9532_TYPE_NONE }, /* power OFF gpio */
 233         {       .type = PCA9532_TYPE_NONE }, /* reset gpio */

This patch defines a new pin type, PCA9532_TYPE_GPIO, and registers a
gpiochip if any pin has this type set.  The gpio will registers all chip
pins but will filter on gpio_request.

[randy.dunlap@oracle.com: fix build when GPIOLIB is not enabled]
Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jan Weitzel <j.weitzel@phytec.de>
Cc: Juergen Kilb <j.kilb@phytec.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:50 -07:00
Shreshtha Kumar Sahu
b1e6b7068f leds: add driver for LM3530 ALS
Simple backlight driver for National Semiconductor LM3530.  Presently only
manual mode is supported, PWM and ALS support to be added.

Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:43:59 -07:00
Johannes Berg
0bae35e14b leds: fix up dependencies
It's not useful to build LED triggers when there's no LEDs that can be
triggered by them.  Therefore, fix up the dependencies so that this
cannot happen, and fix a few users that select triggers to depend on
LEDS_CLASS as well (there is also one user that also selects LEDS_CLASS,
which is OK).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Arnd Hannemann <arnd@arndnet.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-02 14:51:15 -08:00
Samu Onkalo
f4920f673c leds: update LP552x support Kconfig and Makefile
Provide configuration and compilation support for LP5521 and LP5523

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12 07:55:32 -08:00
Johannes Berg
5ada28bf76 led-class: always implement blinking
Currently, blinking LEDs can be awkward because it is not guaranteed that
all LEDs implement blinking.  The trigger that wants it to blink then
needs to implement its own timer solution.

Rather than require that, add led_blink_set() API that triggers can use.
This function will attempt to use hw blinking, but if that fails
implements a timer for it.  To stop blinking again, brightness_set() also
needs to be wrapped into API that will stop the software blink.

As a result of this, the timer trigger becomes a very trivial one, and
hopefully we can finally see triggers using blinking as well because it's
always easy to use.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12 07:55:32 -08:00
Simon Guinot
2446783250 leds: add LED driver for Big Network series LEDs
This patch add a LED class driver for LEDs found on the LaCie 2Big and
5Big Network v2 boards. The LEDs are wired to a CPLD and are controlled
through a GPIO extension bus.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-10-07 14:02:12 -04:00
Simon Guinot
84712e9aa4 [ARM] Kirkwood: add LaCie d2 Network v2 support
Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-09-19 22:43:44 -04:00