Pull vfs d_inode/d_flags memory ordering fixes from Al Viro:
"Fallout from tree-wide audit for ->d_inode/->d_flags barriers use.
Basically, the problem is that negative pinned dentries require
careful treatment - unless ->d_lock is locked or parent is held at
least shared, another thread can make them positive right under us.
Most of the uses turned out to be safe - the main surprises as far as
filesystems are concerned were
- race in dget_parent() fastpath, that might end up with the caller
observing the returned dentry _negative_, due to insufficient
barriers. It is positive in memory, but we could end up seeing the
wrong value of ->d_inode in CPU cache. Fixed.
- manual checks that result of lookup_one_len_unlocked() is positive
(and rejection of negatives). Again, insufficient barriers (we
might end up with inconsistent observed values of ->d_inode and
->d_flags). Fixed by switching to a new primitive that does the
checks itself and returns ERR_PTR(-ENOENT) instead of a negative
dentry. That way we get rid of boilerplate converting negatives
into ERR_PTR(-ENOENT) in the callers and have a single place to
deal with the barrier-related mess - inside fs/namei.c rather than
in every caller out there.
The guts of pathname resolution *do* need to be careful - the race
found by Ritesh is real, as well as several similar races.
Fortunately, it turns out that we can take care of that with fairly
local changes in there.
The tree-wide audit had not been fun, and I hate the idea of repeating
it. I think the right approach would be to annotate the places where
we are _not_ guaranteed ->d_inode/->d_flags stability and have sparse
catch regressions. But I'm still not sure what would be the least
invasive way of doing that and it's clearly the next cycle fodder"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/namei.c: fix missing barriers when checking positivity
fix dget_parent() fastpath race
new helper: lookup_positive_unlocked()
fs/namei.c: pull positivity check into follow_managed()
Most of the callers of lookup_one_len_unlocked() treat negatives are
ERR_PTR(-ENOENT). Provide a helper that would do just that. Note
that a pinned positive dentry remains positive - it's ->d_inode is
stable, etc.; a pinned _negative_ dentry can become positive at any
point as long as you are not holding its parent at least shared.
So using lookup_one_len_unlocked() needs to be careful;
lookup_positive_unlocked() is safer and that's what the callers
end up open-coding anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Quota statistics counted as 64-bit per-cpu counter. Reading sums per-cpu
fractions as signed 64-bit int, filters negative values and then reports
lower half as signed 32-bit int.
Result may looks like:
fs.quota.allocated_dquots = 22327
fs.quota.cache_hits = -489852115
fs.quota.drops = -487288718
fs.quota.free_dquots = 22083
fs.quota.lookups = -486883485
fs.quota.reads = 22327
fs.quota.syncs = 335064
fs.quota.writes = 3088689
Values bigger than 2^31-1 reported as negative.
All counters except "allocated_dquots" and "free_dquots" are monotonic,
thus they should be reported as is without filtering negative values.
Kernel doesn't have generic helper for 64-bit sysctl yet,
let's use at least unsigned long.
Link: https://lore.kernel.org/r/157337934693.2078.9842146413181153727.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Make dquot_get_state() gracefully handle a situation when there are no
quota files present even though quotas are enabled.
Signed-off-by: Jan Kara <jack@suse.cz>
Quota on and quota off are protected by s_umount semaphore held in
exclusive mode since commit 7d6cd73d33 "quota: Hold s_umount in
exclusive mode when enabling / disabling quotas". This makes it
impossible for dquot_disable() to race with other enabling or disabling
of quotas. Simplify the cleanup done by dquot_disable() based on this
fact and also remove some stale comments. As a bonus this cleanup makes
dquot_disable() properly handle a case when there are no quota inodes.
Signed-off-by: Jan Kara <jack@suse.cz>
Now dquot_enable() has only two internal callers and both of them just
need to update quota flags and don't need most of checks. Just drop
dquot_enable() and fold necessary functionality into the two calling
places.
Signed-off-by: Jan Kara <jack@suse.cz>
Rename vfs_load_quota_inode() to dquot_load_quota_inode() to be
consistent with naming of other functions used for enabling quota
accounting from filesystems. Also export the function and add some
sanity checks to assure filesystems are calling the function properly.
Signed-off-by: Jan Kara <jack@suse.cz>
We already have quota inode loaded when resuming quotas. Use
vfs_load_quota() to avoid some pointless churn with the quota inode.
Signed-off-by: Jan Kara <jack@suse.cz>
Factor out setting up of quota inode and eventual error cleanup from
vfs_load_quota_inode(). This will simplify situation for filesystems
that don't have any quota inodes.
Signed-off-by: Jan Kara <jack@suse.cz>
There is a race window where quota was redirted once we drop dq_list_lock inside dqput(),
but before we grab dquot->dq_lock inside dquot_release()
TASK1 TASK2 (chowner)
->dqput()
we_slept:
spin_lock(&dq_list_lock)
if (dquot_dirty(dquot)) {
spin_unlock(&dq_list_lock);
dquot->dq_sb->dq_op->write_dquot(dquot);
goto we_slept
if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) {
spin_unlock(&dq_list_lock);
dquot->dq_sb->dq_op->release_dquot(dquot);
dqget()
mark_dquot_dirty()
dqput()
goto we_slept;
}
So dquot dirty quota will be released by TASK1, but on next we_sleept loop
we detect this and call ->write_dquot() for it.
XFSTEST: 440a80d4cb
Link: https://lore.kernel.org/r/20191031103920.3919-2-dmonakhov@openvz.org
CC: stable@vger.kernel.org
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
It is meaningless to increase DQST_LOOKUPS number while iterating
over dirty/inuse list, so just avoid it.
Link: https://lore.kernel.org/r/20190926083408.4269-1-cgxu519@zoho.com.cn
Signed-off-by: Chengguang Xu <cgxu519@zoho.com.cn>
Signed-off-by: Jan Kara <jack@suse.cz>
We reset time limit when current usage is smaller
or equal to soft limit in other place, so follow
this rule in do_set_dqblk().
Signed-off-by: Chengguang Xu <cgxu519@zoho.com.cn>
Link: https://lore.kernel.org/r/20190724053216.19392-1-cgxu519@zoho.com.cn
Signed-off-by: Jan Kara <jack@suse.cz>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAl0mED8ACgkQnJ2qBz9k
QNnZ9wgAmC+eP8m6jB38HM7gZ+fWGEX3+FvnjbMbnXmNJTsnYWYC1VIRZhwKZb4b
42OGinfLq5tZMY/whrFBdB/c4UbVhAMhd1aFTpM2n5A6FR12YZxaLZEC+MLy3T7z
VU8m4uWDn80OvlUByo4Bylh+Icj78m8tLgj8SHSWxoh/DlGVKSLj9OKufV9Laens
YxubcUxE5sEEu8IVQen84283oJoizmeQf+f9yogAKIaskDLBzxqBIZwEACEUUchz
kEWRiHwS+Ou8EUHuwXqdKKksQgoLHEdxz2szYK1xSQ1wPmxMKPG5DqbQZv2QUBD0
Ek5T5YP4Tmph4s14n+jKDhakAJcqIQ==
=HWaa
-----END PGP SIGNATURE-----
Merge tag 'for_v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, udf and quota updates from Jan Kara:
- some ext2 fixes and cleanups
- a fix of udf bug when extending files
- a fix of quota Q_XGETQSTAT[V] handling
* tag 'for_v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix incorrect final NOT_ALLOCATED (hole) extent length
ext2: Use kmemdup rather than duplicating its implementation
quota: honor quota type in Q_XGETQSTAT[V] calls
ext2: Always brelse bh on failure in ext2_iget()
ext2: add missing brelse() in ext2_iget()
ext2: Fix a typo in ext2_getattr argument
ext2: fix a typo in comment
ext2: add missing brelse() in ext2_new_inode()
ext2: optimize ext2_xattr_get()
ext2: introduce new helper for xattr entry comparison
ext2: merge xattr next entry check to ext2_xattr_entry_valid()
ext2: code cleanup for ext2_preread_inode()
ext2: code cleanup by using test_opt() and clear_opt()
doc: ext2: update description of quota options for ext2
ext2: Strengthen xattr block checks
ext2: Merge loops in ext2_xattr_set()
ext2: introduce helper for xattr entry validation
ext2: introduce helper for xattr header validation
quota: add dqi_dirty_list description to comment of Dquot List Management
Run below script as root, dquot_add_space will return -EDQUOT since
__dquot_transfer call dquot_add_space with flags=0, and dquot_add_space
think it's a preallocation. Fix it by set flags as DQUOT_SPACE_WARN.
mkfs.ext4 -O quota,project /dev/vdb
mount -o prjquota /dev/vdb /mnt
setquota -P 23 1 1 0 0 /dev/vdb
dd if=/dev/zero of=/mnt/test-file bs=4K count=1
chattr -p 23 test-file
Fixes: 7b9ca4c61b ("quota: Reduce contention on dq_data_lock")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Actually there are four lists for dquot management, so add
the description of dqui_dirty_list to comment.
Signed-off-by: Chengguang Xu <cgxu519@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When we fail from allocating inode/space, we back out
the change we already did. In a special case which has
exceeded soft limit by the change, we should also check
time limit and reset it properly.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Local variable *reserved* of remove_dquot_ref() is only used if
define CONFIG_QUOTA_DEBUG, but not ebraced in CONFIG_QUOTA_DEBUG
macro, which leads to unused-but-set-variable warning when compiling.
This patch ebrace it into CONFIG_QUOTA_DEBUG macro like what is done
in add_dquot_ref().
Signed-off-by: Jiang Biao <benbjiang@tencent.com>
Signed-off-by: Jan Kara <jack@suse.cz>
We need to check return code only when calling ->read_dqblk(),
so fix it properly.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Use list_first_entry() and list_empty() instead of opencoded variants.
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The dquots in the free_dquots list are not reclaimed in LRU way.
put_dquot_last() puts entries to the tail and dqcache_shrink_scan()
frees from the tail. Free unreferenced dquots in LRU order because it
seems more reasonable than freeing most recently used.
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
dquot_init() is never called in atomic context.
This function is only set as a parameter of fs_initcall().
Despite never getting called from atomic context,
dquot_init() calls __get_free_pages() with GFP_ATOMIC,
which waits busily for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
to avoid busy waiting and improve the possibility of sucessful allocation.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
register_shrinker() might return -ENOMEM error since Linux 3.12.
Call panic() as with other failure checks in this function if
register_shrinker() failed.
Fixes: 1d3d4437ea ("vmscan: per-node deferred work")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Jan Kara <jack@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
In commit 6184fc0b8d ("quota: Propagate error from ->acquire_dquot()"),
we have propagated error from __dquot_initialize to caller, but we forgot
to handle such error in add_dquot_ref(), so, currently, during quota
accounting information initialization flow, if we failed for some of
inodes, we just ignore such error, and do account for others, which is
not a good implementation.
In this patch, we choose to let user be aware of such error, so after
turning on quota successfully, we can make sure all inodes disk usage
can be accounted, which will be more reasonable.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Pull quota, ext2, isofs and udf fixes from Jan Kara:
- two small quota error handling fixes
- two isofs fixes for architectures with signed char
- several udf block number overflow and signedness fixes
- ext2 rework of mount option handling to avoid GFP_KERNEL allocation
with spinlock held
- ... it also contains a patch to implement auditing of responses to
fanotify permission events. That should have been in the fanotify
pull request but I mistakenly merged that patch into a wrong branch
and noticed only now at which point I don't think it's worth rebasing
and redoing.
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: be aware of error from dquot_initialize
quota: fix potential infinite loop
isofs: use unsigned char types consistently
isofs: fix timestamps beyond 2027
udf: Fix some sign-conversion warnings
udf: Fix signed/unsigned format specifiers
udf: Fix 64-bit sign extension issues affecting blocks > 0x7FFFFFFF
udf: Remove some outdate references from documentation
udf: Avoid overflow when session starts at large offset
ext2: Fix possible sleep in atomic during mount option parsing
ext2: Parse mount options into a dedicated structure
audit: Record fanotify access control decisions
Commit 6184fc0b8d ("quota: Propagate error from ->acquire_dquot()")
missed to handle error from dquot_initialize in dquot_file_open, fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In dquot_writeback_dquots(), we write back dquot from dirty dquots
list. There is a potential infinite loop if ->write_dquot() failure
and forget remove dquot from the list. This patch clear dirty bit
anyway to avoid it.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Eryu has reported that since commit 7b9ca4c61b "quota: Reduce
contention on dq_data_lock" test generic/233 occasionally fails. This is
caused by the fact that since that commit we don't generate warning and
set grace time for quota allocations that have DQUOT_SPACE_NOFAIL set
(these are for example some metadata allocations in ext4). We need these
allocations to behave regularly wrt warning generation and grace time
setting so fix the code to return to the original behavior.
Reported-and-tested-by: Eryu Guan <eguan@redhat.com>
CC: stable@vger.kernel.org
Fixes: 7b9ca4c61b
Signed-off-by: Jan Kara <jack@suse.cz>
Lock dq_dqb_lock around dquot_decr_inodes()
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: 7b9ca4c61b ("quota: Reduce contention on dq_data_lock")
Signed-off-by: Jan Kara <jack@suse.cz>
Pull quota scaling updates from Jan Kara:
"This contains changes to make the quota subsystem more scalable.
Reportedly it improves number of files created per second on ext4
filesystem on fast storage by about a factor of 2x"
* 'quota_scaling' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (28 commits)
quota: Add lock annotations to struct members
quota: Reduce contention on dq_data_lock
fs: Provide __inode_get_bytes()
quota: Inline dquot_[re]claim_reserved_space() into callsite
quota: Inline inode_{incr,decr}_space() into callsites
quota: Inline functions into their callsites
ext4: Disable dirty list tracking of dquots when journalling quotas
quota: Allow disabling tracking of dirty dquots in a list
quota: Remove dq_wait_unused from dquot
quota: Move locking into clear_dquot_dirty()
quota: Do not dirty bad dquots
quota: Fix possible corruption of dqi_flags
quota: Propagate ->quota_read errors from v2_read_file_info()
quota: Fix error codes in v2_read_file_info()
quota: Push dqio_sem down to ->read_file_info()
quota: Push dqio_sem down to ->write_file_info()
quota: Push dqio_sem down to ->get_next_id()
quota: Push dqio_sem down to ->release_dqblk()
quota: Remove locking for writing to the old quota format
quota: Do not acquire dqio_sem for dquot overwrites in v2 format
...
dq_data_lock is currently used to protect all modifications of quota
accounting information, consistency of quota accounting on the inode,
and dquot pointers from inode. As a result contention on the lock can be
pretty heavy.
Reduce the contention on the lock by protecting quota accounting
information by a new dquot->dq_dqb_lock and consistency of quota
accounting with inode usage by inode->i_lock.
This change reduces time to create 500000 files on ext4 on ramdisk by 50
different processes in separate directories by 6% when user quota is
turned on. When those 50 processes belong to 50 different users, the
improvement is about 9%.
Signed-off-by: Jan Kara <jack@suse.cz>
inode_incr_space() and inode_decr_space() have only two callsites.
Inline them there as that will make locking changes simpler.
Signed-off-by: Jan Kara <jack@suse.cz>
inode_add_rsv_space() and inode_sub_rsv_space() had only one callsite.
Inline them there directly. inode_claim_rsv_space() and
inode_reclaim_rsv_space() had two callsites so inline them there as
well. This will simplify further locking changes.
Signed-off-by: Jan Kara <jack@suse.cz>
Filesystems that are journalling quotas generally don't need tracking of
dirty dquots in a list since forcing a transaction commit flushes all
quotas anyway. Allow filesystem to say it doesn't want dquots to be
tracked as it reduces contention on the dq_list_lock.
Signed-off-by: Jan Kara <jack@suse.cz>
Currently every dquot carries a wait_queue_head_t used only when we are
turning quotas off to wait for last users to drop dquot references.
Since such rare case is not performance sensitive in any means, just use
a global waitqueue for this and save space in struct dquot. Also convert
the logic to use wait_event() instead of open-coding it.
Signed-off-by: Jan Kara <jack@suse.cz>
Move locking of dq_list_lock into clear_dquot_dirty(). It makes the
function more self-contained and will simplify our life later.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently we mark dirty even dquots that are not active (i.e.,
initialization or reading failed for them). Thus later we have to check
whether dirty dquot is really active and just clear the dirty bit if
not. Avoid this complication by just never marking non-active dquot as
dirty.
Signed-off-by: Jan Kara <jack@suse.cz>
dqi_flags modifications are protected by dq_data_lock. However the
modifications in vfs_load_quota_inode() and in mark_info_dirty() were
not which could lead to corruption of dqi_flags. Since modifications to
dqi_flags are rare, this is hard to observe in practice but in theory it
could happen. Fix the problem by always using dq_data_lock for
protection.
Signed-off-by: Jan Kara <jack@suse.cz>
Push down acquisition of dqio_sem into ->read_file_info() callback. This
is for consistency with other operations and it also allows us to get
rid of an ugliness in OCFS2.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Push down acquisition of dqio_sem into ->write_file_info() callback.
Mostly for consistency with other operations.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Push down acquisition of dqio_sem into ->get_next_id() callback. Mostly
for consistency with other operations.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Push down acquisition of dqio_sem into ->release_dqblk() callback. It
will allow quota formats to decide whether they need it or not.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Push down acquisition of dqio_sem into ->write_dqblk() callback. It will
allow quota formats to decide whether they need it or not.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
