This allocation is required for filesystem operations to make forward
progress, thus needs a mempool.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Especially in userspace, we sometime run into resource exhaustion issues
with starting up threads after mark and sweep/fsck.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a regression from the patch
bcachefs: Fix copygc dying on startup
In general only the allocator thread itself should be updating
ca->allocator_state, the thread waking up the allocator setting it is an
ugly hack only needed to avoid racing with the copygc threads when we're
first starting up.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We have a separate mechanism for ratelimiting copygc now - the pd
controller has only been causing problems.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Currently debugging an issue with copygc not running when it's supposed
to, and this is an obvious first step.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Awhile back the meaning of is_available_bucket() and thus also
bch_dev_usage->buckets_unavailable changed to include buckets that are
owned by the allocator - this was so that the stat could be persisted
like other allocation information, and wouldn't have to be regenerated
by walking each bucket at mount time.
This broke copygc, which needs to consider buckets that are reclaimable
and haven't yet been grabbed by the allocator thread and moved onta
freelist. This patch fixes that by adding dev_buckets_reclaimable() for
copygc and the allocator thread, and cleans up some of the callers a bit.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If a ptr gen doesn't match the bucket gen, the bucket likely doesn't
contain the data we want - but it's still possible the data we want
might have been overwritten, and for btree node pointers we can verify
whether or not the node is the one we wanted with the node's sequence
number, so it's better to keep the pointer and try reading from it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_check_fix_ptrs() can update/reallocate k
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is useful for the filesystem dump debugging tool - when we're
hitting bugs we want to skip as much of the recovery process as
possible, and the dump tool only needs to know where metadata lives.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If a given set of replicas is entirely on failed devices, don't fail the
mount: we will still fail the mount if we have some copies on non failed
devices.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is just a band-aid fix for now.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is to generate strings for them, so that we can print them out.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
These are only complained about when building in userspace, for some
reason.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Having a packed format that can represent a field larger than the
unpacked type breaks bkey_packed_successor() assertions - we need to fix this to start using the snapshot filed.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We dropped support for !BTREE_NODE_NEW_EXTENT_OVERWRITE but it turned
out there were people who still had filesystems with btree nodes in that
format in the wild. This adds a new compat feature that indicates we've
scanned for and rewritten nodes in the old format, and does that scan at
mount time if the option isn't set.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a new data job type to scan for btree nodes in the old extent
format, and rewrite them.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a bug reported where the journal is failing to allocate a journal
write - this should help figure out what's going on.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a cache coherency bug with the btree key cache in the fsck code -
this fixes fsck to be consistent about not using it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This was causing a deadlock when btree_update_nodes_writtes() invokes
journal reclaim because of the btree cache being too dirty.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We're seeing failures to mount because of a failure to start the
allocator threads, which currently happens fairly late in the mount
process, after walking all metadata, and kthread_create() fails if
something has tried to kill the mount process, which is probably not
what we want.
This patch avoids this issue by creating, but not starting, the
allocator threads when we preallocate all of our other in memory data
structures.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_btree_node_get_noiter() isn't used from the btree iterator code,
which retries with the btree node cache cannibalize lock held on
-ENOMEM, so we should do it ourself if necessary.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When snapshots arrive, we won't necessarily be able to arbitrarily split
existis - when we need to split an existing extent, we'll have to check
if the extent was overwritten in child snapshots and if so emit a
whiteout for the split in the child snapshot.
Because extents couldn't span btree nodes previously, journal replay
would sometimes have to split existing extents. That's no good anymore,
but fortunately since extent handling has already been lifted above most
of the btree code there's no real need for that rule anymore.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We need to differentiate between the search position of a btree
iterator, vs. what it actually points at (what we found). This matters
for extents, where iter->pos will typically be the start of the key we
found and iter->real_pos will be the end of the key we found (which soon
won't necessarily be in the same btree node!) and it will also matter
for snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The upcoming patch to allow extents to span btree nodes will require
this... and this assertion seems to be popping, and it's not a very good
assertion anyways.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
More repair code, now that we can repair extents during initial gc.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When allocating an erasure coding stripe, bcachefs will always reuse any
partial stripes before reserving a new stripe. This causes unnecessary
read amplification when preparing a stripe for writing. This patch changes
bcachefs to always reserve new stripes first, only relying on stripe reuse
when copygc needs more time to empty buckets from existing stripes.
Signed-off-by: Robbie Litchfield <blam.kiwi@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This makes bch2_btree_iter_peek_prev() and bch2_btree_iter_prev()
consistent with peek() and next(), w.r.t. iter->pos.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a new common helper for advancing past the last key returned
by peek().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The only reason we were keeping this around was for
BTREE_INSERT_NOUNLOCK semantics - if bch2_btree_iter_set_pos() advances
to the next leaf node, it'll drop the lock on the node that we just
inserted to.
But we don't rely on BTREE_INSERT_NOUNLOCK semantics for the extents
btree, just the inodes btree, and if we do need it for the extents btree
in the future we can do it more cleanly by cloning the iterator - this
lets us delete some special cases in the btree iterator code, which is
complicated enough as it is.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There's no good reason for these functions to not be using
bch2_btree_iter_set_pos().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It's possible we're calling hash_redo_key() because of a duplicate key -
easiest fix for that is to just not use BCH_HASH_SET_MUST_CREATE.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Also, make the wait in bch2_journal_flush_seq() interruptible, not just
killable.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When the replicas mechanism was added, for tracking data by which drives
it's replicated on, the check for whether we have sufficient devices was
never updated to make use of it. This patch finally does that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We're using BCH_FEATURE_alloc_v2 to also gate journalling updates to dev
usage - we don't have the code for reconstructing this from buckets
anymore, so we need to run fsck if it's not set.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes some arithmetic bugs in "bcachefs: Journal updates to dev
usage" - additionally, it cleans things up by switching everything that
goes in every journal entry to the journal_entry_res mechanism.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This eliminates the need to scan every bucket to regenerate dev_usage at
mount time.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Originally, bcachefs - going back to bcache - stored, for each bucket, a
16 bit counter corresponding to how long it had been since the bucket
was read from. But, this required periodically rescaling counters on
every bucket to avoid wraparound. That wasn't an issue in bcache, where
we'd perodically rewrite the per bucket metadata all at once, but in
bcachefs we're trying to avoid having to walk every single bucket.
This patch switches to persisting 64 bit io clocks, corresponding to the
64 bit bucket timestaps introduced in the previous patch with
KEY_TYPE_alloc_v2.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This introduces a new version of KEY_TYPE_alloc, which uses the new
varint encoding introduced for inodes. This means we'll eventually be
able to support much larger bucket sizes (for SMR devices), and the
read/write time fields are expanded to 64 bits - which will be used in
the next patch to get rid of the periodic rescaling of those fields.
Also, for buckets that are members of erasure coded stripes, this adds
persistent fields for the index of the stripe they're members of and the
stripe redundancy. This is part of work to get rid of having to scan and
read into memory the alloc and stripes btrees at mount time.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a bug introduced by "bcachefs: Improve diagnostics when
journal entries are missing" - devices in a replicas entry are supposed
to be sorted.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Also, make journal writes obey foreground_target and metadata_target.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
