Commit Graph

98 Commits

Author SHA1 Message Date
Jianmin Lv d0c50cc4b9 ACPI / PCI: fix LPIC IRQ model default PCI IRQ polarity
On LoongArch based systems, the PCI devices (e.g. SATA controllers and
PCI-to-PCI bridge controllers) in Loongson chipsets output high-level
interrupt signal to the interrupt controller they are connected (see
Loongson 7A1000 Bridge User Manual v2.00, sec 5.3, "For the bridge chip,
AC97 DMA interrupts are edge triggered, gpio interrupts can be configured
to be level triggered or edge triggered as needed, and the rest of the
interrupts are level triggered and active high."), while the IRQs are
active low from the perspective of PCI (see Conventional PCI spec r3.0,
sec 2.2.6, "Interrupts on PCI are optional and defined as level sensitive,
asserted low."), which means that the interrupt output of PCI devices plugged
into PCI-to-PCI bridges of Loongson chipset will be also converted to high-level.
So high level triggered type is required to be passed to acpi_register_gsi()
when creating mappings for PCI devices.

Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221022075955.11726-2-lvjianmin@loongson.cn
2022-11-26 12:57:18 +00:00
Rafael J. Wysocki bf5144a612 ACPI: PCI: IRQ: Consolidate printing diagnostic messages
The code in pci_irq.c prints diagnostic messages using different
and inconsistent methods.  The majority of them are printed with
the help of the dev_*() familiy of logging functions, but
ACPI_DEBUG_PRINT() and ACPI_DEBUG_PRINT_RAW() are still used in
some places which requires the ACPICA debug to be enabled
additionally which is a nuisance and one message is printed
using the raw printk().

To consolidate the printing of messages in that code, convert all of
the ACPI_DEBUG_PRINT() instances in it into dev_dbg(), which is
consistent with the way the other messages are printed by it,
replace the only ACPI_DEBUG_PRINT_RAW() instance with pr_debug() and
make it use pr_warn() istead of printk(KERN_WARNING ).

Also add a pr_fmt() definition to that file and drop the
_COMPONENT and ACPI_MODULE_NAME() definitions that are not used
any more after the above changes.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
2021-03-08 16:51:08 +01:00
Maximilian Luz c6237b210d ACPI: Fix whitespace inconsistencies
Replaces spaces with tabs where spaces have been (inconsistently) used
for indentation and removes trailing whitespaces.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-11-09 19:08:06 +01:00
Wenwen Wang 29b49958cf ACPI / PCI: fix acpi_pci_irq_enable() memory leak
In acpi_pci_irq_enable(), 'entry' is allocated by kzalloc() in
acpi_pci_irq_check_entry() (invoked from acpi_pci_irq_lookup()). However,
it is not deallocated if acpi_pci_irq_valid() returns false, leading to a
memory leak. To fix this issue, free 'entry' before returning 0.

Fixes: e237a55184 ("x86/ACPI/PCI: Recognize that Interrupt Line 255 means "not connected"")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-09-03 09:41:25 +02:00
Thomas Gleixner c942fddf87 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:37 -07:00
Lorenzo Pieralisi 10b68700ad ACPI / PCI: fix GIC irq model default PCI IRQ polarity
On ACPI ARM based systems the GIC interrupt controller
and corresponding interrupt model permit only the high
polarity for level interrupts.

ACPI firmware describes PCI legacy IRQs through entries
in the _PRT objects. Entries in the _PRT can be of two types:

- Static: not configurable, trigger/polarity default to level-low,
  _PRT entry defines the global GSI interrupt number
- Configurable: _PRT interrupt entry contains a reference to the
  corresponding PCI interrupt link device (that in turn provides the
  interrupt descriptor through its _CRS/_PRS methods)

Configurable IRQ entries are not currently allowed by the ACPI
specification on ARM since they can only be used for interrupt pins that
are routable, as per ACPI specifications (version 6.1, 6.2.13):

"[...] There are two ways that _PRT can be used. Typically, the
interrupt input that a given PCI interrupt is on is configurable. For
example, a given PCI interrupt might be configured for either IRQ 10 or
11 on an 8259 interrupt controller. In this model, each interrupt is
represented in the ACPI namespace as a PCI Interrupt Link Device. [...]"

ARM platforms GIC configurations do not allow dynamic IRQ routing,
since routing is statically laid out at synthesis time; therefore PCI
interrupt links cannot be used for PCI legacy IRQ descriptions in the
_PRT on ARM systems.

On the other hand, current core ACPI code handling PCI legacy IRQs
consider IRQ trigger/polarity for static _PRT entries as level-low.

On ARM systems with a GIC interrupt controller and corresponding
ACPI interrupt model this does not work in that GIC interrupt
controller is only capable of handling level interrupts whose
polarity is high (for PCI legacy IRQs - that are level-low by
specification - this means that the legacy IRQs are inverted before
reaching the interrupt controller pin), resulting in IRQ allocation
failures such as:

genirq: Setting trigger mode 8 for irq 18 failed (gic_set_type+0x0/0x48)

Change the default polarity for PCI legacy IRQs to high on systems
booting wth ACPI on platforms with a GIC interrupt controller model,
fixing the discrepancy between specification and HW behaviour.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Duc Dang <dhdang@apm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10 02:50:50 +02:00
Chen Fan e237a55184 x86/ACPI/PCI: Recognize that Interrupt Line 255 means "not connected"
Per the x86-specific footnote to PCI spec r3.0, sec 6.2.4, the value 255 in
the Interrupt Line register means "unknown" or "no connection."
Previously, when we couldn't derive an IRQ from the _PRT, we fell back to
using the value from Interrupt Line as an IRQ.  It's questionable whether
we should do that at all, but the spec clearly suggests we shouldn't do it
for the value 255 on x86.

Calling request_irq() with IRQ 255 may succeed, but the driver won't
receive any interrupts.  Or, if IRQ 255 is shared with another device, it
may succeed, and the driver's ISR will be called at random times when the
*other* device interrupts.  Or it may fail if another device is using IRQ
255 with incompatible flags.  What we *want* is for request_irq() to fail
predictably so the driver can fall back to polling.

On x86, assume 255 in the Interrupt Line means the INTx line is not
connected.  In that case, set dev->irq to IRQ_NOTCONNECTED so request_irq()
will fail gracefully with -ENOTCONN.

We found this problem on a system where Secure Boot firmware assigned
Interrupt Line 255 to an i801_smbus device and another device was already
using MSI-X IRQ 255.  This was in v3.10, where i801_probe() fails if
request_irq() fails:

  i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143)
  i801_smbus 0000:00:1f.3: can't derive routing for PCI INT C
  i801_smbus 0000:00:1f.3: PCI INT C: no GSI
  genirq: Flags mismatch irq 255. 00000080 (i801_smbus) vs. 00000000 (megasa)
  CPU: 0 PID: 2487 Comm: kworker/0:1 Not tainted 3.10.0-229.el7.x86_64 #1
  Hardware name: FUJITSU PRIMEQUEST 2800E2/D3736, BIOS PRIMEQUEST 2000 Serie5
  Call Trace:
    dump_stack+0x19/0x1b
    __setup_irq+0x54a/0x570
    request_threaded_irq+0xcc/0x170
    i801_probe+0x32f/0x508 [i2c_i801]
    local_pci_probe+0x45/0xa0
  i801_smbus 0000:00:1f.3: Failed to allocate irq 255: -16
  i801_smbus: probe of 0000:00:1f.3 failed with error -16

After aeb8a3d16a ("i2c: i801: Check if interrupts are disabled"),
i801_probe() will fall back to polling if request_irq() fails.  But we
still need this patch because request_irq() may succeed or fail depending
on other devices in the system.  If request_irq() fails, i801_smbus will
work by falling back to polling, but if it succeeds, i801_smbus won't work
because it expects interrupts that it may not receive.

Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-09 01:23:35 +01:00
Bjorn Helgaas 6c777e8799 Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()"
991de2e590 ("PCI, x86: Implement pcibios_alloc_irq() and
pcibios_free_irq()") appeared in v4.3 and helps support IOAPIC hotplug.

Олег reported that the Elcus-1553 TA1-PCI driver worked in v4.2 but not
v4.3 and bisected it to 991de2e590.  Sunjin reported that the RocketRAID
272x driver worked in v4.2 but not v4.3.  In both cases booting with
"pci=routirq" is a workaround.

I think the problem is that after 991de2e590, we no longer call
pcibios_enable_irq() for upstream bridges.  Prior to 991de2e590, when a
driver called pci_enable_device(), we recursively called
pcibios_enable_irq() for upstream bridges via pci_enable_bridge().

After 991de2e590, we call pcibios_enable_irq() from pci_device_probe()
instead of the pci_enable_device() path, which does *not* call
pcibios_enable_irq() for upstream bridges.

Revert 991de2e590 to fix these driver regressions.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211
Fixes: 991de2e590 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()")
Reported-and-tested-by: Олег Мороз <oleg.moroz@mcc.vniiem.ru>
Reported-by: Sunjin Yang <fan4326@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
CC: Jiang Liu <jiang.liu@linux.intel.com>
2016-02-27 08:52:20 -06:00
Bjorn Helgaas 67b4eab91c Revert "PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed"
Revert 811a4e6fce ("PCI: Add helpers to manage pci_dev->irq and
pci_dev->irq_managed").

This is part of reverting 991de2e590 ("PCI, x86: Implement
pcibios_alloc_irq() and pcibios_free_irq()") to fix regressions it
introduced.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211
Fixes: 991de2e590 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
CC: Jiang Liu <jiang.liu@linux.intel.com>
2016-02-17 17:23:36 -06:00
Colin Ian King 4528897885 ACPI, PCI, irq: remove redundant check for null string pointer
source is decleared as a 4 byte char array in struct acpi_pci_routing_table
so !prt->source is a redundant null string pointer check. Detected with
smatch:

drivers/acpi/pci_irq.c:134 do_prt_fixups() warn: this array is probably
  non-NULL. 'prt->source'

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-05 13:40:05 +01:00
Jiang Liu 5ebc760353 ACPI, PCI, irq: Do not share PCI IRQ with ISA IRQ
Avoid IRQs occupied by ISA IRQs when allocating IRQs for PCI link devices,
otherwise it may cause interrupt storm due to incompatible pin attributes.

This issue was triggered on a KVM virtual machine, which
 1) uses IRQ9 for SCI in high level mode.
 2) defines an PCI interrupt link device (LNKS) with IRQ9 as the only
    possible irq.
 3) has an PCI device referring to link device LNKS.
So it causes interrupt storm when enabling the PCI device because PCI IRQ
works in low level mode.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-26 01:53:07 +02:00
Linus Torvalds ae98207309 Power management and ACPI material for v4.3-rc1
- ACPICA update to upstream revision 20150818 including method
    tracing extensions to allow more in-depth AML debugging in the
    kernel and a number of assorted fixes and cleanups (Bob Moore,
    Lv Zheng, Markus Elfring).
 
  - ACPI sysfs code updates and a documentation update related to
    AML method tracing (Lv Zheng).
 
  - ACPI EC driver fix related to serialized evaluations of _Qxx
    methods and ACPI tools updates allowing the EC userspace tool
    to be built from the kernel source (Lv Zheng).
 
  - ACPI processor driver updates preparing it for future
    introduction of CPPC support and ACPI PCC mailbox driver
    updates (Ashwin Chaugule).
 
  - ACPI interrupts enumeration fix for a regression related
    to the handling of IRQ attribute conflicts between MADT
    and the ACPI namespace (Jiang Liu).
 
  - Fixes related to ACPI device PM (Mika Westerberg, Srinidhi Kasagar).
 
  - ACPI device registration code reorganization to separate the
    sysfs-related code and bus type operations from the rest (Rafael
    J Wysocki).
 
  - Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause,
    Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss).
 
  - ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups
    (Pan Xinhui, Rafael J Wysocki).
 
  - cpufreq core cleanups on top of the previous changes allowing it
    to preseve its sysfs directories over system suspend/resume (Viresh
    Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior).
 
  - cpufreq fixes and cleanups related to governors (Viresh Kumar).
 
  - cpufreq updates (core and the cpufreq-dt driver) related to the
    turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz).
 
  - New DT bindings for Operating Performance Points (OPP), support
    for them in the OPP framework and in the cpufreq-dt driver plus
    related OPP framework fixes and cleanups (Viresh Kumar).
 
  - cpufreq powernv driver updates (Shilpasri G Bhat).
 
  - New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen).
 
  - Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups
    and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean).
 
  - intel_pstate driver updates including Skylake-S support, support
    for enabling HW P-states per CPU and an additional vendor bypass
    list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao).
 
  - cpuidle core fixes related to the handling of coupled idle states
    (Xunlei Pang).
 
  - intel_idle driver updates including Skylake Client support and
    support for freeze-mode-specific idle states (Len Brown).
 
  - Driver core updates related to power management (Andy Shevchenko,
    Rafael J Wysocki).
 
  - Generic power domains framework fixes and cleanups (Jon Hunter,
    Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson).
 
  - Device PM QoS framework update to allow the latency tolerance
    setting to be exposed to user space via sysfs (Mika Westerberg).
 
  - devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect
    exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas).
 
  - System sleep support updates (Alan Stern, Len Brown, SungEun Kim).
 
  - rockchip-io AVS support updates (Heiko Stuebner).
 
  - PM core clocks support fixup (Colin Ian King).
 
  - Power capping RAPL driver update including support for Skylake H/S
    and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi).
 
  - Generic device properties framework fixes related to the handling
    of static (driver-provided) property sets (Andy Shevchenko).
 
  - turbostat and cpupower updates (Len Brown, Shilpasri G Bhat,
    Shreyas B Prabhu).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJV5hhGAAoJEILEb/54YlRxs+EQAK51iFk48+IbpHYaZZ50Yo4m
 ZZc2zBcbwRcBlU9vKERrhG+jieSl8J/JJNxT8vBjKqyvNw038mCjewQh02ol0HuC
 R7nlDiVJkmZ50sLO4xwE/1UBZr/XqbddwCUnYzvFMkMTA0ePzFtf8BrJ1FXpT8S/
 fkwSXQty6hvJDwxkfrbMSaA730wMju9lahx8D6MlmUAedWYZOJDMQKB4WKa/St5X
 9uckBPHUBB2KiKlXxdbFPwKLNxHvLROq5SpDLc6cM/7XZB+QfNFy85CUjCUtYo1O
 1W8k0qnztvZ6UEv27qz5dejGyAGOarMWGGNsmL9evoeGeHRpQL+dom7HcTnbAfUZ
 walyhYSm/zKkdy7Vl3xWUUQkMG48+PviMI6K0YhHXb3Rm5wlR/yBNZTwNIty9SX/
 fKCHEa8QynWwLxgm53c3xRkiitJxMsHNK03moLD9zQMjshTyTNvpNbZoahyKQzk6
 H+9M1DBRHhkkREDWSwGutukxfEMtWe2vcZcyERrFiY7l5k1j58DwDBMPqjPhRv6q
 P/1NlCzr0XYf83Y86J18LbDuPGDhTjjIEn6CqbtI2mmWqTg3+rF7zvS2ux+FzMnA
 gisv8l6GT9JiWhxKFqqL/rrVpwtyHebWLYE/RpNUW6fEzLziRNj1qyYO9dqI/GGi
 I3rfxlXoc/5xJWCgNB8f
 =fTgI
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "From the number of commits perspective, the biggest items are ACPICA
  and cpufreq changes with the latter taking the lead (over 50 commits).

  On the cpufreq front, there are many cleanups and minor fixes in the
  core and governors, driver updates etc.  We also have a new cpufreq
  driver for Mediatek MT8173 chips.

  ACPICA mostly updates its debug infrastructure and adds a number of
  fixes and cleanups for a good measure.

  The Operating Performance Points (OPP) framework is updated with new
  DT bindings and support for them among other things.

  We have a few updates of the generic power domains framework and a
  reorganization of the ACPI device enumeration code and bus type
  operations.

  And a lot of fixes and cleanups all over.

  Included is one branch from the MFD tree as it contains some
  PM-related driver core and ACPI PM changes a few other commits are
  based on.

  Specifics:

   - ACPICA update to upstream revision 20150818 including method
     tracing extensions to allow more in-depth AML debugging in the
     kernel and a number of assorted fixes and cleanups (Bob Moore, Lv
     Zheng, Markus Elfring).

   - ACPI sysfs code updates and a documentation update related to AML
     method tracing (Lv Zheng).

   - ACPI EC driver fix related to serialized evaluations of _Qxx
     methods and ACPI tools updates allowing the EC userspace tool to be
     built from the kernel source (Lv Zheng).

   - ACPI processor driver updates preparing it for future introduction
     of CPPC support and ACPI PCC mailbox driver updates (Ashwin
     Chaugule).

   - ACPI interrupts enumeration fix for a regression related to the
     handling of IRQ attribute conflicts between MADT and the ACPI
     namespace (Jiang Liu).

   - Fixes related to ACPI device PM (Mika Westerberg, Srinidhi
     Kasagar).

   - ACPI device registration code reorganization to separate the
     sysfs-related code and bus type operations from the rest (Rafael J
     Wysocki).

   - Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause,
     Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss).

   - ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups (Pan
     Xinhui, Rafael J Wysocki).

   - cpufreq core cleanups on top of the previous changes allowing it to
     preseve its sysfs directories over system suspend/resume (Viresh
     Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior).

   - cpufreq fixes and cleanups related to governors (Viresh Kumar).

   - cpufreq updates (core and the cpufreq-dt driver) related to the
     turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz).

   - New DT bindings for Operating Performance Points (OPP), support for
     them in the OPP framework and in the cpufreq-dt driver plus related
     OPP framework fixes and cleanups (Viresh Kumar).

   - cpufreq powernv driver updates (Shilpasri G Bhat).

   - New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen).

   - Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups
     and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean).

   - intel_pstate driver updates including Skylake-S support, support
     for enabling HW P-states per CPU and an additional vendor bypass
     list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao).

   - cpuidle core fixes related to the handling of coupled idle states
     (Xunlei Pang).

   - intel_idle driver updates including Skylake Client support and
     support for freeze-mode-specific idle states (Len Brown).

   - Driver core updates related to power management (Andy Shevchenko,
     Rafael J Wysocki).

   - Generic power domains framework fixes and cleanups (Jon Hunter,
     Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson).

   - Device PM QoS framework update to allow the latency tolerance
     setting to be exposed to user space via sysfs (Mika Westerberg).

   - devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect
     exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas).

   - System sleep support updates (Alan Stern, Len Brown, SungEun Kim).

   - rockchip-io AVS support updates (Heiko Stuebner).

   - PM core clocks support fixup (Colin Ian King).

   - Power capping RAPL driver update including support for Skylake H/S
     and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi).

   - Generic device properties framework fixes related to the handling
     of static (driver-provided) property sets (Andy Shevchenko).

   - turbostat and cpupower updates (Len Brown, Shilpasri G Bhat,
     Shreyas B Prabhu)"

* tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (180 commits)
  cpufreq: speedstep-lib: Use monotonic clock
  cpufreq: powernv: Increase the verbosity of OCC console messages
  cpufreq: sfi: use kmemdup rather than duplicating its implementation
  cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor()
  cpufreq: rename cpufreq_real_policy as cpufreq_user_policy
  cpufreq: remove redundant 'policy' field from user_policy
  cpufreq: remove redundant 'governor' field from user_policy
  cpufreq: update user_policy.* on success
  cpufreq: use memcpy() to copy policy
  cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event
  cpufreq: mediatek: Add MT8173 cpufreq driver
  dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings
  PM / Domains: Fix typo in description of genpd_dev_pm_detach()
  PM / Domains: Remove unusable governor dummies
  PM / Domains: Make pm_genpd_init() available to modules
  PM / domains: Align column headers and data in pm_genpd_summary output
  powercap / RAPL: disable the 2nd power limit properly
  tools: cpupower: Fix error when running cpupower monitor
  PM / OPP: Drop unlikely before IS_ERR(_OR_NULL)
  PM / OPP: Fix static checker warning (broken 64bit big endian systems)
  ...
2015-09-01 19:45:46 -07:00
Jiang Liu 811a4e6fce PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed
Add pci_has_managed_irq(), pci_set_managed_irq(), and
pci_reset_managed_irq() to simplify code.  No functional change.

[bhelgaas: changelog]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30 14:13:20 -05:00
Jiang Liu 991de2e590 PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()
To support IOAPIC hotplug, we need to allocate PCI IRQ resources on demand
and free them when not used anymore.

Implement pcibios_alloc_irq() and pcibios_free_irq() to dynamically
allocate and free PCI IRQs.

Remove mp_should_keep_irq(), which is no longer used.

[bhelgaas: changelog]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30 14:05:57 -05:00
Jarkko Nikula 4c62dbbce9 ACPI: Remove FSF mailing addresses
There is no need to carry potentially outdated Free Software Foundation
mailing address in file headers since the COPYING file includes it.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-08 02:27:32 +02:00
Linus Torvalds 43c9fad942 Power management and ACPI material for v4.2-rc1
- ACPICA update to upstream revision 20150515 including basic
    support for ACPI 6 features: new ACPI tables introduced by
    ACPI 6 (STAO, XENV, WPBT, NFIT, IORT), changes related to the
    other tables (DTRM, FADT, LPIT, MADT), new predefined names
    (_BTH, _CR3, _DSD, _LPI, _MTL, _PRR, _RDI, _RST, _TFP, _TSN),
    fixes and cleanups (Bob Moore, Lv Zheng).
 
  - ACPI device power management core code update to follow ACPI 6
    which reflects the ACPI device power management implementation
    in Windows (Rafael J Wysocki).
 
  - Rework of the backlight interface selection logic to reduce the
    number of kernel command line options and improve the handling
    of DMI quirks that may be involved in that and to make the
    code generally more straightforward (Hans de Goede).
 
  - Fixes for the ACPI Embedded Controller (EC) driver related to
    the handling of EC transactions (Lv Zheng).
 
  - Fix for a regression related to the ACPI resources management
    and resulting from a recent change of ACPI initialization code
    ordering (Rafael J Wysocki).
 
  - Fix for a system initialization regression related to ACPI
    introduced during the 3.14 cycle and caused by running the
    code that switches the platform over to the ACPI mode too
    early in the initialization sequence (Rafael J Wysocki).
 
  - Support for the ACPI _CCA device configuration object related
    to DMA cache coherence (Suravee Suthikulpanit).
 
  - ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
 
  - ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
 
  - ACPI processor driver cleanups (Hanjun Guo).
 
  - Cleanups and documentation update related to the ACPI device
    properties interface based on _DSD (Rafael J Wysocki).
 
  - ACPI device power management fixes (Rafael J Wysocki).
 
  - Assorted cleanups related to ACPI (Dominik Brodowski. Fabian
    Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
 
  - Fix for a long-standing issue causing General Protection Faults
    to be generated occasionally on return to user space after resume
    from ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
 
  - Fix to make the suspend core code return -EBUSY consistently in
    all cases when system suspend is aborted due to wakeup detection
    (Ruchi Kandoi).
 
  - Support for automated device wakeup IRQ handling allowing drivers
    to make their PM support more starightforward (Tony Lindgren).
 
  - New tracepoints for suspend-to-idle tracing and rework of the
    prepare/complete callbacks tracing in the PM core (Todd E Brandt,
    Rafael J Wysocki).
 
  - Wakeup sources framework enhancements (Jin Qian).
 
  - New macro for noirq system PM callbacks (Grygorii Strashko).
 
  - Assorted cleanups related to system suspend (Rafael J Wysocki).
 
  - cpuidle core cleanups to make the code more efficient (Rafael J
    Wysocki).
 
  - powernv/pseries cpuidle driver update (Shilpasri G Bhat).
 
  - cpufreq core fixes related to CPU online/offline that should
    reduce the overhead of these operations quite a bit, unless the
    CPU in question is physically going away (Viresh Kumar, Saravana
    Kannan).
 
  - Serialization of cpufreq governor callbacks to avoid race
    conditions in some cases (Viresh Kumar).
 
  - intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
    Bhargava, Joe Konno).
 
  - cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
    Holla, Felipe Balbi, Tang Yuantian).
 
  - Assorted cleanups in cpufreq drivers and core (Shailendra Verma,
    Fabian Frederick, Wang Long).
 
  - New Device Tree bindings for representing Operating Performance
    Points (Viresh Kumar).
 
  - Updates for the common clock operations support code in the PM
    core (Rajendra Nayak, Geert Uytterhoeven).
 
  - PM domains core code update (Geert Uytterhoeven).
 
  - Intel Knights Landing support for the RAPL (Running Average Power
    Limit) power capping driver (Dasaratharaman Chandramouli).
 
  - Fixes related to the floor frequency setting on Atom SoCs in the
    RAPL power capping driver (Ajay Thomas).
 
  - Runtime PM framework documentation update (Ben Dooks).
 
  - cpupower tool fix (Herton R Krzesinski).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJViJdWAAoJEILEb/54YlRx/9gP/3gHoFevNRycvn0VpKqdufCI
 Mxy2LBBLlfyW2uD3+NvqvA2WWSo0Cs/LgXa04eAVxPdU7k48s8w+54U23wSouzjW
 gfwAmuHxzDR8v0h8X3h6BxNzmkIQHtmDcQlA/cZdHejY/UUw01yxRGNUUZDNbxlm
 WXn2nmlBLmGqXTYq0fpBV+3jicUghJqHHsBCqa3VR2yQioHMJG01F4UZMqYTZunN
 OIvDUghxByKz6alzdCqlLl1Y0exV6vwWUAzBsl1qHqmHu/bWFSZn3ujNNVrjqHhw
 Kl7/8dC2pQkv3Zo3gEVvfQ0onotwWZxGHzPQRdvmxvRnBunQVCi/wynx90yABX/r
 PPb/iBNV0mZskbF0zb0GZT3ZZWGA8Z0p3o5JQv2jV4m62qTzx8w50Y5kbn9N1WT+
 5bre7AVbVAlGonWszcS9iE+6TOboRz9OD1CCwPFXHItFutlBkau+1hHfFoLM0o9n
 LhpGuyszT/EUa1BHkLzuCckFqO2DpbF3N2CKmuTekw0CdgdsvRL2pRByuerk3j7R
 WQhlcvBq5YH6j43AuoEZKp8r1iN8oG/iqlrMYQaYWrW9hJaoQOoU8dGJxp/e7gKN
 r/qeYjETI+tIsjCbtH5WQzzxDI3gPISAYAtfqs7G34EEo+Lwp6kyRUAF4kDot2V3
 ZIyuKMmTu4cdwDETr/O+
 =7jTj
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "The rework of backlight interface selection API from Hans de Goede
  stands out from the number of commits and the number of affected
  places perspective.  The cpufreq core fixes from Viresh Kumar are
  quite significant too as far as the number of commits goes and because
  they should reduce CPU online/offline overhead quite a bit in the
  majority of cases.

  From the new featues point of view, the ACPICA update (to upstream
  revision 20150515) adding support for new ACPI 6 material to ACPICA is
  the one that matters the most as some new significant features will be
  based on it going forward.  Also included is an update of the ACPI
  device power management core to follow ACPI 6 (which in turn reflects
  the Windows' device PM implementation), a PM core extension to support
  wakeup interrupts in a more generic way and support for the ACPI _CCA
  device configuration object.

  The rest is mostly fixes and cleanups all over and some documentation
  updates, including new DT bindings for Operating Performance Points.

  There is one fix for a regression introduced in the 4.1 cycle, but it
  adds quite a number of lines of code, it wasn't really ready before
  Thursday and you were on vacation, so I refrained from pushing it on
  the last minute for 4.1.

  Specifics:

   - ACPICA update to upstream revision 20150515 including basic support
     for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO,
     XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM,
     FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI,
     _MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore,
     Lv Zheng).

   - ACPI device power management core code update to follow ACPI 6
     which reflects the ACPI device power management implementation in
     Windows (Rafael J Wysocki).

   - rework of the backlight interface selection logic to reduce the
     number of kernel command line options and improve the handling of
     DMI quirks that may be involved in that and to make the code
     generally more straightforward (Hans de Goede).

   - fixes for the ACPI Embedded Controller (EC) driver related to the
     handling of EC transactions (Lv Zheng).

   - fix for a regression related to the ACPI resources management and
     resulting from a recent change of ACPI initialization code ordering
     (Rafael J Wysocki).

   - fix for a system initialization regression related to ACPI
     introduced during the 3.14 cycle and caused by running the code
     that switches the platform over to the ACPI mode too early in the
     initialization sequence (Rafael J Wysocki).

   - support for the ACPI _CCA device configuration object related to
     DMA cache coherence (Suravee Suthikulpanit).

   - ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).

   - ACPI battery driver cleanups (Luis Henriques, Mathias Krause).

   - ACPI processor driver cleanups (Hanjun Guo).

   - cleanups and documentation update related to the ACPI device
     properties interface based on _DSD (Rafael J Wysocki).

   - ACPI device power management fixes (Rafael J Wysocki).

   - assorted cleanups related to ACPI (Dominik Brodowski, Fabian
     Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).

   - fix for a long-standing issue causing General Protection Faults to
     be generated occasionally on return to user space after resume from
     ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).

   - fix to make the suspend core code return -EBUSY consistently in all
     cases when system suspend is aborted due to wakeup detection (Ruchi
     Kandoi).

   - support for automated device wakeup IRQ handling allowing drivers
     to make their PM support more starightforward (Tony Lindgren).

   - new tracepoints for suspend-to-idle tracing and rework of the
     prepare/complete callbacks tracing in the PM core (Todd E Brandt,
     Rafael J Wysocki).

   - wakeup sources framework enhancements (Jin Qian).

   - new macro for noirq system PM callbacks (Grygorii Strashko).

   - assorted cleanups related to system suspend (Rafael J Wysocki).

   - cpuidle core cleanups to make the code more efficient (Rafael J
     Wysocki).

   - powernv/pseries cpuidle driver update (Shilpasri G Bhat).

   - cpufreq core fixes related to CPU online/offline that should reduce
     the overhead of these operations quite a bit, unless the CPU in
     question is physically going away (Viresh Kumar, Saravana Kannan).

   - serialization of cpufreq governor callbacks to avoid race
     conditions in some cases (Viresh Kumar).

   - intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
     Bhargava, Joe Konno).

   - cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
     Holla, Felipe Balbi, Tang Yuantian).

   - assorted cleanups in cpufreq drivers and core (Shailendra Verma,
     Fabian Frederick, Wang Long).

   - new Device Tree bindings for representing Operating Performance
     Points (Viresh Kumar).

   - updates for the common clock operations support code in the PM core
     (Rajendra Nayak, Geert Uytterhoeven).

   - PM domains core code update (Geert Uytterhoeven).

   - Intel Knights Landing support for the RAPL (Running Average Power
     Limit) power capping driver (Dasaratharaman Chandramouli).

   - fixes related to the floor frequency setting on Atom SoCs in the
     RAPL power capping driver (Ajay Thomas).

   - runtime PM framework documentation update (Ben Dooks).

   - cpupower tool fix (Herton R Krzesinski)"

* tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits)
  cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
  x86: Load __USER_DS into DS/ES after resume
  PM / OPP: Add binding for 'opp-suspend'
  PM / OPP: Allow multiple OPP tables to be passed via DT
  PM / OPP: Add new bindings to address shortcomings of existing bindings
  ACPI: Constify ACPI device IDs in documentation
  ACPI / enumeration: Document the rules regarding the PRP0001 device ID
  ACPI / video: Make acpi_video_unregister_backlight() private
  acpi-video-detect: Remove old API
  toshiba-acpi: Port to new backlight interface selection API
  thinkpad-acpi: Port to new backlight interface selection API
  sony-laptop: Port to new backlight interface selection API
  samsung-laptop: Port to new backlight interface selection API
  msi-wmi: Port to new backlight interface selection API
  msi-laptop: Port to new backlight interface selection API
  intel-oaktrail: Port to new backlight interface selection API
  ideapad-laptop: Port to new backlight interface selection API
  fujitsu-laptop: Port to new backlight interface selection API
  eeepc-laptop: Port to new backlight interface selection API
  dell-wmi: Port to new backlight interface selection API
  ...
2015-06-23 14:18:07 -07:00
Alex Williamson 917bfd93d3 ACPI / PCI: Account for ARI in _PRT lookups
The PCIe specification, rev 3.0, section 2.2.8.1, contains the following
implementation note:

  Virtual Wire Mapping for INTx Interrupts From ARI Devices

  The implied Device Number for an ARI Device is 0.  When ARI-aware
  software (including BIOS and operating system) enables ARI Forwarding in
  the Downstream Port immediately above an ARI Device in order to access
  its Extended Functions, software must comprehend that the Downstream Port
  will use Device Number 0 for the virtual wire mappings of INTx interrupts
  coming from all Functions of the ARI Device.  If non-ARI-aware software
  attempts to determine the virtual wire mappings for Extended Functions,
  it can come up with incorrect mappings by examining the traditional
  Device Number field and finding it to be non-0.

We account for this in pci_swizzle_interrupt_pin(), but it looks like we
miss it here, looking for a _PRT entry with a slot matching the ARI device
slot number.  This can cause errors like:

  pcieport 0000:80:03.0: can't derive routing for PCI INT B
  sfc 0000:82:01.1: PCI INT B: no GSI

pci_dev.irq is then invalid, resulting in errors for drivers that attempt
to enable INTx on the device.  Fix by using slot 0 for ARI enabled devices.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Don Dutile <ddutile@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-30 20:47:35 -05:00
Hanjun Guo cae756fbaa ACPI / PCI: remove stale list_head in struct acpi_prt_entry
list_head "list" in struct acpi_prt_entry was used to connect
_PRT entries for PCI irq, but after commit 181380b702 ("PCI/ACPI:
Don't cache _PRT, and don't associate them with bus numbers"),
the list head for _PRT entries was removed, but left "list" in
struct acpi_prt_entry which is useless and stale, remove it now.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-22 03:36:24 +02:00
Rafael J. Wysocki 9e8ce4b96b Revert "x86/PCI: Refine the way to release PCI IRQ resources"
Commit b4b55cda58 (Refine the way to release PCI IRQ resources)
introduced a regression in the PCI IRQ resource management by causing
the IRQ resource of a device, established when pci_enabled_device()
is called on a fully disabled device, to be released when the driver
is unbound from the device, regardless of the enable_cnt.

This leads to the situation that an ill-behaved driver can now make a
device unusable to subsequent drivers by an imbalance in their use of
pci_enable/disable_device().  That is a serious problem for secondary
drivers like vfio-pci, which are innocent of the transgressions of
the previous driver.

Since the solution of this problem is not immediate and requires
further discussion, revert commit b4b55cda58 and the issue it was
supposed to address (a bug related to xen-pciback) will be taken
care of in a different way going forward.

Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-20 14:56:19 +01:00
Jiang Liu b4b55cda58 x86/PCI: Refine the way to release PCI IRQ resources
Some PCI device drivers assume that pci_dev->irq won't change after
calling pci_disable_device() and pci_enable_device() during suspend and
resume.

Commit c03b3b0738 ("x86, irq, mpparse: Release IOAPIC pin when
PCI device is disabled") frees PCI IRQ resources when pci_disable_device()
is called and reallocate IRQ resources when pci_enable_device() is
called again. This breaks above assumption. So commit 3eec595235
("x86, irq, PCI: Keep IRQ assignment for PCI devices during
suspend/hibernation") and 9eabc99a63 ("x86, irq, PCI: Keep IRQ
assignment for runtime power management") fix the issue by avoiding
freeing/reallocating IRQ resources during PCI device suspend/resume.
They achieve this by checking dev.power.is_prepared and
dev.power.runtime_status.  PM maintainer, Rafael, then pointed out that
it's really an ugly fix which leaking PM internal state information to
IRQ subsystem.

Recently David Vrabel <david.vrabel@citrix.com> also reports an
regression in pciback driver caused by commit cffe0a2b5a ("x86, irq:
Keep balance of IOAPIC pin reference count"). Please refer to:
http://lkml.org/lkml/2015/1/14/546

So this patch refine the way to release PCI IRQ resources. Instead of
releasing PCI IRQ resources in pci_disable_device()/
pcibios_disable_device(), we now release it at driver unbinding
notification BUS_NOTIFY_UNBOUND_DRIVER. In other word, we only release
PCI IRQ resources when there's no driver bound to the PCI device, and
it keeps the assumption that pci_dev->irq won't through multiple
invocation of pci_enable_device()/pci_disable_device().

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05 15:09:26 +01:00
Jiang Liu 9889eaeb7c ACPI: pci: Do not clear pci_dev->irq in acpi_pci_irq_disable()
Xen pciback driver assumes that pci_dev->irq won't change after calling
pci_disable_device(). But commit cffe0a2b5a
("x86, irq: Keep balance of IOAPIC pin reference count") frees irq
resources and resets pci_dev->irq to zero when pci_disable_device() is
called.

So this is a hotfix for 3.19 to avoid resetting pci_dev->irq, and
another proper fix will be prepared for next merging window.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/1421720467-7709-3-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-20 11:44:40 +01:00
Linus Torvalds e589c9e13a Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Thomas Gleixner:
 "After stopping the full x86/apic branch, I took some time to go
  through the first block of patches again, which are mostly cleanups
  and preparatory work for the irqdomain conversion and ioapic hotplug
  support.

  Unfortunaly one of the real problematic commits was right at the
  beginning, so I rebased this portion of the pending patches without
  the offenders.

  It would be great to get this into 3.19.  That makes reworking the
  problematic parts simpler.  The usual tip testing did not unearth any
  issues and it is fully bisectible now.

  I'm pretty confident that this wont affect the calmness of the xmas
  season.

  Changes:
   - Split the convoluted io_apic.c code into domain specific parts
     (vector, ioapic, msi, htirq)
   - Introduce proper helper functions to retrieve irq specific data
     instead of open coded dereferencing of pointers
   - Preparatory work for ioapic hotplug and irqdomain conversion
   - Removal of the non functional pci-ioapic driver
   - Removal of unused irq entry stubs
   - Make native_smp_prepare_cpus() preemtible to avoid GFP_ATOMIC
     allocations for everything which is called from there.
   - Small cleanups and fixes"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  iommu/amd: Use helpers to access irq_cfg data structure associated with IRQ
  iommu/vt-d: Use helpers to access irq_cfg data structure associated with IRQ
  x86: irq_remapping: Use helpers to access irq_cfg data structure associated with IRQ
  x86, irq: Use helpers to access irq_cfg data structure associated with IRQ
  x86, irq: Make MSI and HT_IRQ indepenent of X86_IO_APIC
  x86, irq: Move IRQ initialization routines from io_apic.c into vector.c
  x86, irq: Move IOAPIC related declarations from hw_irq.h into io_apic.h
  x86, irq: Move HT IRQ related code from io_apic.c into htirq.c
  x86, irq: Move PCI MSI related code from io_apic.c into msi.c
  x86, irq: Replace printk(KERN_LVL) with pr_lvl() utilities
  x86, irq: Make UP version of irq_complete_move() an inline stub
  x86, irq: Move local APIC related code from io_apic.c into vector.c
  x86, irq: Introduce helpers to access struct irq_cfg
  x86, irq: Protect __clear_irq_vector() with vector_lock
  x86, irq: Rename local APIC related functions in io_apic.c as apic_xxx()
  x86, irq: Refine hw_irq.h to prepare for irqdomain support
  x86, irq: Convert irq_2_pin list to generic list
  x86, irq: Kill useless parameter 'irq_attr' of IO_APIC_get_PCI_irq_vector()
  x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI
  x86, irq: Introduce helper to check whether an IOAPIC has been registered
  ...
2014-12-19 14:02:02 -08:00
Jiang Liu cffe0a2b5a x86, irq: Keep balance of IOAPIC pin reference count
To keep balance of IOAPIC pin reference count, we need to protect
pirq_enable_irq(), acpi_pci_irq_enable() and intel_mid_pci_irq_enable()
from reentrance. There are two cases which will cause reentrance.

The first case is caused by suspend/hibernation. If pcibios_disable_irq
is called during suspending/hibernating, we don't release the assigned
IRQ number, otherwise it may break the suspend/hibernation. So late when
pcibios_enable_irq is called during resume, we shouldn't allocate IRQ
number again.

The second case is that function acpi_pci_irq_enable() may be called
twice for PCI devices present at boot time as below:
1) pci_acpi_init()
	--> acpi_pci_irq_enable() if pci_routeirq is true
2) pci_enable_device()
	--> pcibios_enable_device()
		--> acpi_pci_irq_enable()
We can't kill kernel parameter pci_routeirq yet because it's still
needed for debugging purpose.

So flag irq_managed is introduced to track whether IRQ number is
assigned by OS and to protect pirq_enable_irq(), acpi_pci_irq_enable()
and intel_mid_pci_irq_enable() from reentrance.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/1414387308-27148-13-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-12-16 14:08:15 +01:00
Rafael J. Wysocki 5de21bb998 ACPI / PM: Drop CONFIG_PM_RUNTIME from the ACPI core
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so quite a few
depend on CONFIG_PM.

Replace CONFIG_PM_RUNTIME with CONFIG_PM in the ACPI core code.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-04 00:50:19 +01:00
Jiang Liu 9eabc99a63 x86, irq, PCI: Keep IRQ assignment for runtime power management
Now IOAPIC driver dynamically allocates IRQ numbers for IOAPIC pins.
We need to keep IRQ assignment for PCI devices during runtime power
management, otherwise it may cause failure of device wakeups.

Commit 3eec595235 "x86, irq, PCI: Keep IRQ assignment for PCI
devices during suspend/hibernation" has fixed the issue for suspend/
hibernation, we also need the same fix for runtime device sleep too.

Fix: https://bugzilla.kernel.org/show_bug.cgi?id=83271
Reported-and-Tested-by: EmanueL Czirai <amanual@openmailbox.org>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: EmanueL Czirai <amanual@openmailbox.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Grant Likely <grant.likely@linaro.org>
Link: http://lkml.kernel.org/r/1409304383-18806-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-08-29 13:38:00 +02:00
Jiang Liu 3eec595235 x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation
Now IOAPIC driver dynamically allocates IRQ numbers for IOAPIC pins.
We need to keep IRQ assignment for PCI devices during suspend/hibernation,
otherwise it may cause failure of suspend/hibernation due to:
1) Device driver calls pci_enable_device() to allocate an IRQ number
   and register interrupt handler on the returned IRQ.
2) Device driver's suspend callback calls pci_disable_device() and
   release assigned IRQ in turn.
3) Device driver's resume callback calls pci_enable_device() to
   allocate IRQ number again. A different IRQ number may be assigned
   by IOAPIC driver this time.
4) Now the hardware delivers interrupt to the new IRQ but interrupt
   handler is still registered against the old IRQ, so it breaks
   suspend/hibernation.

To fix this issue, we keep IRQ assignment during suspend/hibernation.
Flag pci_dev.dev.power.is_prepared is used to detect that
pci_disable_device() is called during suspend/hibernation.

Reported-and-Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/1407478071-29399-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-08-08 11:14:45 +02:00
Jiang Liu 6a38fa0e3c x86, irq, ACPI: Release IOAPIC pin when PCI device is disabled
Release IOAPIC pin associated with PCI device when the PCI device
is disabled.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Link: http://lkml.kernel.org/r/1402380987-32577-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-06-21 23:05:44 +02:00
Tomasz Nowicki c1aaae673f ACPI / PCI: Do not call ISA-specific code if ISA is not supported
This commit moves ISA-specific code to separate function and makes that
function depend on CONFIG_{E}ISA so that we do not have to maintain
acpi_isa_irq_to_gsi() function for architectures which do not support ISA.

Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-20 21:37:42 +01:00
Tomasz Nowicki b685f3b174 ACPI / PCI: Fix memory leak in acpi_pci_irq_enable()
acpi_pci_link_allocate_irq() can return negative gsi even if
entry != NULL.  For that case we have a memory leak, so free
entry before returning from acpi_pci_irq_enable() for gsi < 0.

Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-18 15:47:23 +01:00
Lv Zheng 8b48463f89 ACPI: Clean up inclusions of ACPI header files
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.

First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds.  For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.

Second, there are ordering dependencies between those files that always
have to be met.  Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there.  And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds.  That also is taken care of including
<linux/acpi.h> as appropriate.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-07 01:03:14 +01:00
Yinghai Lu 181380b702 PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
Previously, we cached _PRT (PCI routing table, ACPI 5.0 sec 6.2.12)
contents and associated each _PRT entry with a PCI bus number.  The bus
number association means dependencies on PCI device enumeration and bus
number assignment, as well as on the PCI/ACPI binding process.

After 4f535093cf ("PCI: Put pci_dev in device tree as early as possible"),
these dependencies caused the IRQ issues reported by Peter:

    pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
    pci 0000:00:1e.0: can't derive routing for PCI INT A
    snd_ctxfi 0000:09:02.0: PCI INT A: no GSI - using ISA IRQ 5
    irq 18: nobody cared (try booting with the "irqpoll" option)

This patch removes _PRT caching.  Instead, we evaluate _PRT as needed
in the pci_enable_device() path.  This also removes the dependency on
PCI bus numbers: we can simply look at the _PRT associated with each
bridge as we walk upstream toward the root.

[bhelgaas: changelog]
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=53561
Reported-and-tested-by: Peter Hurley <peter@hurleysoftware.com>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-16 11:58:34 -07:00
Linus Torvalds 193c0d6825 PCI changes for the v3.8 merge window:
Host bridge hotplug:
     - Untangle _PRT from struct pci_bus (Bjorn Helgaas)
     - Request _OSC control before scanning root bus (Taku Izumi)
     - Assign resources when adding host bridge (Yinghai Lu)
     - Remove root bus when removing host bridge (Yinghai Lu)
     - Remove _PRT during hot remove (Yinghai Lu)
 
   SRIOV
     - Add sysfs knobs to control numVFs (Don Dutile)
 
   Power management
     - Notify devices when power resource turned on (Huang Ying)
 
   Bug fixes
     - Work around broken _SEG on HP xw9300 (Bjorn Helgaas)
     - Keep runtime PM enabled for unbound PCI devices (Huang Ying)
     - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie)
     - Fix xen frontend shutdown issue (David Vrabel)
     - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott)
 
   Miscellaneous
     - Add GPL license for drivers/pci/ioapic (Andrew Cooks)
     - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas)
     - NumaChip remote PCI support (Daniel Blueman)
     - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo Han)
     - Convert dev_printk() to dev_info(), etc (Joe Perches)
     - Add support for non PCI BAR ROM data (Matthew Garrett)
     - Add x86 support for host bridge translation offset (Mike Yoknis)
     - Report success only when every driver supports AER (Vijay Pandarathil)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJQyKwSAAoJEPGMOI97Hn6zScgQAJZK2VDfCv74mKrgSDNokIzH
 5nVDrc9AHKJm7CUODs6keJK5d4TD/za3Zao68zrYHsJJKes2ni2Z3W34HP2RXKK2
 eOmePXOHYPPZMlimP9r9cVxNu1ZJCyp/yWSBcsPF4zUgWhBWLRaSj85I049gQ0sz
 +05nZYfLjVd3HNiaXsG4CQyMrNF46XEsLhF9vs+Nr2GHPwrpzhfScgYv63oDS86C
 3ICKsjmiRUZcNelxIFYmyxa5u89QdW5XHjzc9eHGQuus24Vxw+TZzsdfc17sUJEE
 HTyXY+RjDpOVhdtwwUjrCEOiyZYvy3g9+3sKxoxgt/76ghdUaR7fxITwB97qVMFD
 T0ESlKjSV/Qv5QYdyy5uP4zwNs/PXCWXkTg/L1m71F30BxKWDa7tgiA6uK7Z7fl5
 1aokKBdk3mtJJJIDJG1YkxPXx/JItTGCNYrx7CcFj49rSjrUWLQdmrYahersRIsB
 3wiD2xTi9e4dXeP/+VGzGOWB/sHk+73jvrvZe/REa1FCnMINDz4+9V9WaGROMqyq
 MQ8kX0KfYcNVNxy1GOXjU5wLpMN/t/QbvI7gwzRP1DAUCJPoOgFy7AjvSTVG3zuy
 8CtdOFttVkUn5dqsbQR0gVbyQVTS3PGSKz5XC/s8kVDWhja0xZTBYwrskM/4zdSD
 Xf48OyYV5EjpC3FYUSiU
 =OE3Q
 -----END PGP SIGNATURE-----

Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI update from Bjorn Helgaas:
 "Host bridge hotplug:
   - Untangle _PRT from struct pci_bus (Bjorn Helgaas)
   - Request _OSC control before scanning root bus (Taku Izumi)
   - Assign resources when adding host bridge (Yinghai Lu)
   - Remove root bus when removing host bridge (Yinghai Lu)
   - Remove _PRT during hot remove (Yinghai Lu)

  SRIOV
    - Add sysfs knobs to control numVFs (Don Dutile)

  Power management
   - Notify devices when power resource turned on (Huang Ying)

  Bug fixes
   - Work around broken _SEG on HP xw9300 (Bjorn Helgaas)
   - Keep runtime PM enabled for unbound PCI devices (Huang Ying)
   - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie)
   - Fix xen frontend shutdown issue (David Vrabel)
   - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott)

  Miscellaneous
   - Add GPL license for drivers/pci/ioapic (Andrew Cooks)
   - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas)
   - NumaChip remote PCI support (Daniel Blueman)
   - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo
     Han)
   - Convert dev_printk() to dev_info(), etc (Joe Perches)
   - Add support for non PCI BAR ROM data (Matthew Garrett)
   - Add x86 support for host bridge translation offset (Mike Yoknis)
   - Report success only when every driver supports AER (Vijay
     Pandarathil)"

Fix up trivial conflicts.

* tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits)
  PCI: Use phys_addr_t for physical ROM address
  x86/PCI: Add NumaChip remote PCI support
  ath9k: Use standard #defines for PCIe Capability ASPM fields
  iwlwifi: Use standard #defines for PCIe Capability ASPM fields
  iwlwifi: collapse wrapper for pcie_capability_read_word()
  iwlegacy: Use standard #defines for PCIe Capability ASPM fields
  iwlegacy: collapse wrapper for pcie_capability_read_word()
  cxgb3: Use standard #defines for PCIe Capability ASPM fields
  PCI: Add standard PCIe Capability Link ASPM field names
  PCI/portdrv: Use PCI Express Capability accessors
  PCI: Use standard PCIe Capability Link register field names
  x86: Use PCI setup data
  PCI: Add support for non-BAR ROMs
  PCI: Add pcibios_add_device
  EFI: Stash ROMs if they're not in the PCI BAR
  PCI: Add and use standard PCI-X Capability register names
  PCI/PM: Keep runtime PM enabled for unbound PCI devices
  xen-pcifront: Handle backend CLOSED without CLOSING
  PCI: SRIOV control and status via sysfs (documentation)
  PCI/AER: Report success only when every device has AER-aware driver
  ...
2012-12-13 12:14:47 -08:00
Rafael J. Wysocki d4c091f13d Merge branch 'acpi-general'
* acpi-general: (38 commits)
  ACPI / thermal: _TMP and _CRT/_HOT/_PSV/_ACx dependency fix
  ACPI: drop unnecessary local variable from acpi_system_write_wakeup_device()
  ACPI: Fix logging when no pci_irq is allocated
  ACPI: Update Dock hotplug error messages
  ACPI: Update Container hotplug error messages
  ACPI: Update Memory hotplug error messages
  ACPI: Update CPU hotplug error messages
  ACPI: Add acpi_handle_<level>() interfaces
  ACPI: remove use of __devexit
  ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist.
  ACPI / battery: Correct battery capacity values on Thinkpads
  Revert "ACPI / x86: Add quirk for "CheckPoint P-20-00" to not use bridge _CRS_ info"
  ACPI: create _SUN sysfs file
  ACPI / memhotplug: bind the memory device when the driver is being loaded
  ACPI / memhotplug: don't allow to eject the memory device if it is being used
  ACPI / memhotplug: free memory device if acpi_memory_enable_device() failed
  ACPI / memhotplug: fix memory leak when memory device is unbound from acpi_memhotplug
  ACPI / memhotplug: deal with eject request in hotplug queue
  ACPI / memory-hotplug: add memory offline code to acpi_memory_device_remove()
  ACPI / memory-hotplug: call acpi_bus_trim() to remove memory device
  ...

Conflicts:
	include/linux/acpi.h (two additions at the end of the same file)
2012-11-29 21:43:06 +01:00
Joe Perches 66fd3835ac ACPI: Fix logging when no pci_irq is allocated
Work around a defect in the printk subsystem introduced by a
logging change.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21 23:56:15 +01:00
Andy Shevchenko 35e92b78c1 ACPI / x86: Export acpi_[un]register_gsi()
These functions might be called from modules as well so make sure
they are exported.

In addition, implement empty version of acpi_unregister_gsi() and
remove the one from pci_irq.c.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:28:00 +01:00
Bjorn Helgaas 79c4412298 ACPI: Pass segment/bus to _PRT add/del so they don't depend on pci_bus
This effectively reverts 859a3f86ca ("ACPI: simplify
acpi_pci_irq_add_prt() API") and d9efae3688 ("ACPI: simplify
acpi_pci_irq_del_prt() API").

The reason is to disentangle these routines from the struct pci_bus.
We want to be able to add the _PRT before the struct pci_bus
exists, and delete the _PRT after we've removed the pci_bus.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2012-11-05 15:54:22 -07:00
Vincent Palatin 85b8582d7c PCI/PM/Runtime: make PCI traces quieter
When the runtime PM is activated on PCI, if a device switches state
frequently (e.g. an EHCI controller with autosuspending USB devices
connected) the PCI configuration traces might be very verbose in the
kernel log.  Let's guard those traces with DEBUG condition.

Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06 12:11:16 -08:00
Stefan Assmann d7f6169a0d ACPI: fix CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS
The following was observed by Steve Rostedt on 3.0.0-rc5
Backtrace:
irq 16: nobody cared (try booting with the "irqpoll" option)
Pid: 65, comm: irq/16-uhci_hcd Not tainted 3.0.0-rc5-test+ #94
Call Trace:
 [<ffffffff810aa643>] __report_bad_irq+0x37/0xc1
 [<ffffffff810aaa2d>] note_interrupt+0x14e/0x1c9
 [<ffffffff810a9a05>] ? irq_thread_fn+0x3c/0x3c
 [<ffffffff810a990e>] irq_thread+0xf6/0x1b1
 [<ffffffff810a9818>] ? irq_finalize_oneshot+0xb3/0xb3
 [<ffffffff8106b4d6>] kthread+0x9f/0xa7
 [<ffffffff814f1f04>] kernel_thread_helper+0x4/0x10
 [<ffffffff8103ca09>] ? finish_task_switch+0x7b/0xc0
 [<ffffffff814eac78>] ? retint_restore_args+0x13/0x13
 [<ffffffff8106b437>] ? __init_kthread_worker+0x5a/0x5a
 [<ffffffff814f1f00>] ? gs_change+0x13/0x13
handlers:
[<ffffffff810a912d>] irq_default_primary_handler threaded [<ffffffff8135eaa6>] usb_hcd_irq
[<ffffffff810a912d>] irq_default_primary_handler threaded [<ffffffff8135eaa6>] usb_hcd_irq
Disabling IRQ #16

The problem being that a device triggers boot interrupts (due to threaded
interrupt handling and masking of the IO-APIC), which are forwarded
to the PIRQ line of the device. These interrupts are not handled on the PIRQ
line because the interrupt handler is not present there.
This should have already been fixed by CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS.
However some parts of the quirk got lost in the ACPI merge. This is a resent of
the patch proposed in 2009.
See http://lkml.org/lkml/2009/9/7/192

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-16 18:24:17 -04:00
Zhang Rui 03e7c3432d ACPI: remove unused declaration of proc_fs.h
Remove unused declaration of proc_fs.h.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-15 22:03:36 -04:00
Eric W. Biederman 414d3448db x86, acpi/irq: pci device dev->irq is an isa irq not a gsi
Strictly speaking on x86 (where acpi is used) dev->irq must be
a dual i8259 irq input aka an isa irq.  Therefore we should translate
that isa irq into a gsi before passing it to a function that
takes a gsi.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <1269936436-7039-3-git-send-email-ebiederm@xmission.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-05-04 13:34:30 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Len Brown a192a9580b ACPI: Move definition of PREFIX from acpi_bus.h to internal..h
Linux/ACPI core files using internal.h all PREFIX "ACPI: ",
however, not all ACPI drivers use/want it -- and they
should not have to #undef PREFIX to define their own.

Add GPL commment to internal.h while we are there.

This does not change any actual console output,
asside from a whitespace fix.

Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28 19:57:27 -04:00
Len Brown fbe8cddd2d Merge branches 'acerhdf', 'acpi-pci-bind', 'bjorn-pci-root', 'bugzilla-12904', 'bugzilla-13121', 'bugzilla-13396', 'bugzilla-13533', 'bugzilla-13612', 'c3_lock', 'hid-cleanups', 'misc-2.6.31', 'pdc-leak-fix', 'pnpacpi', 'power_nocheck', 'thinkpad_acpi', 'video' and 'wmi' into release 2009-06-24 01:19:50 -04:00
Alexander Chiang d9efae3688 ACPI: simplify acpi_pci_irq_del_prt() API
There is no need to pass a segment/bus tuple to this API, as the callsite
always has a struct pci_bus. We can derive segment/bus from the
struct pci_bus, so let's take this opportunit to simplify the API and
make life easier for the callers.

Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17 23:22:16 -04:00
Alexander Chiang 859a3f86ca ACPI: simplify acpi_pci_irq_add_prt() API
A PCI domain cannot change as you descend down subordinate buses, which
makes the 'segment' argument to acpi_pci_irq_add_prt() useless.

Change the interface to take a struct pci_bus *, from whence we can derive
the bus number and segment. Reducing the number of arguments makes life
simpler for callers.

Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17 23:22:16 -04:00
Yinghai Lu a2f809b08a irq: change ACPI GSI APIs to also take a device argument
We want to use dev_to_node() later on, to be aware of the 'home node'
of the GSI in question.

[ Impact: cleanup, prepare the IRQ code to be more NUMA aware ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Len Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Len Brown <lenb@kernel.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
LKML-Reference: <49F65560.20904@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:21:17 +02:00
Len Brown 8a3f257c70 Merge branch 'misc' into release 2009-04-05 01:52:07 -04:00
Jan Beulich 609d4bc949 ACPI: constify tables in pci_irq.c
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-03 22:00:40 -04:00
Bjorn Helgaas c686d141c7 ACPI: PCI: use generic pci_swizzle_interrupt_pin()
Use the generic pci_swizzle_interrupt_pin() instead of ACPI-specific code.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-17 01:56:30 -04:00
Bjorn Helgaas 39488b041e ACPI: PCI: add HP copyright
Add HP copyright to pci_irq.c.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-30 21:50:01 -05:00