Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development on
some new hardware support and cleanups of older drivers. Highlights of
this pull request are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this
tool it seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted
as they depened on some typec changes, but the cross-tree
merges caused problems so they will come back later through
the platform tree.
All of these have been in linux-next for a while now with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYup5Rg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yko/ACfYD9mdlr4WleUpVw5/uNywN6sL9EAn1tv0V8W
cUTAoWxAf5orClAC22ZU
=Vcqd
-----END PGP SIGNATURE-----
Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development
on some new hardware support and cleanups of older drivers. Highlights
are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this tool it
seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted as
they depened on some typec changes, but the cross-tree merges
caused problems so they will come back later through the platform
tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
usb: misc: onboard_usb_hub: Remove duplicated power_on delay
usb: misc: onboard_usb_hub: Add TI USB8041 hub support
usb: misc: onboard_usb_hub: Add reset-gpio support
USB: usbsevseg: convert sysfs snprintf to sysfs_emit
dt-bindings: usb: Add binding for TI USB8041 hub controller
ARM: multi_v7_defconfig: enable USB onboard HUB driver
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
usb: typec: ucsi: stm32g0: add bootloader support
usb: typec: ucsi: stm32g0: add support for stm32g0 controller
dt-bindings: usb: typec: add bindings for stm32g0 controller
usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
usb/chipidea: fix repeated words in comments
usb: renesas-xhci: Do not print any log while fw verif success
usb: typec: retimer: Add missing id check in match callback
USB: xhci: Fix comment typo
usb/typec/tcpm: fix repeated words in comments
usb/musb: fix repeated words in comments
...
Remove the obsolete 'efivars' sysfs based interface to the EFI variable
store, now that all users have moved to the efivarfs pseudo file system,
which was created ~10 years ago to address some fundamental shortcomings
in the sysfs based driver.
Move the 'business logic' related to which EFI variables are important
and may affect the boot flow from the efivars support layer into the
efivarfs pseudo file system, so it is no longer exposed to other parts
of the kernel.
-----BEGIN PGP SIGNATURE-----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=VVQ6
-----END PGP SIGNATURE-----
Merge tag 'efi-efivars-removal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull efivars sysfs interface removal from Ard Biesheuvel:
"Remove the obsolete 'efivars' sysfs based interface to the EFI
variable store, now that all users have moved to the efivarfs pseudo
file system, which was created ~10 years ago to address some
fundamental shortcomings in the sysfs based driver.
Move the 'business logic' related to which EFI variables are important
and may affect the boot flow from the efivars support layer into the
efivarfs pseudo file system, so it is no longer exposed to other parts
of the kernel"
* tag 'efi-efivars-removal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: vars: Move efivar caching layer into efivarfs
efi: vars: Switch to new wrapper layer
efi: vars: Remove deprecated 'efivars' sysfs interface
Over the past ten years, new machine support was based on device tree,
and an initial set of about 400 boards using ATAGS with boardfile
for booting were grandfathered in, with about half of them either
removed or converted to DT over time.
Based on the recent mailing list discussion I started, I have now
turned the findings into a set of patches that marks most board files as
'depends on UNUSED_BOARD_FILES', leaving only 38 of the 196 boards.
For the boards that are marked as unused, there are two final chances
for potential users: The removal is scheduled to take place after the
longterm stable kernel at the end of 2022, so users can stay on that
version for another few years, and if anyone still has one of these
machines and is planning to keep updating kernels beyond that version,
they can speak up now to have their boards taken off the list again.
Waiting for the LTS release also makes sure that there will be at
least one longterm kernel that contains the recent multiplatform
conversion along while still supporting all legacy boards.
The short summary of the current status is:
- The s3c24xx, cns3xxx, iop32x and mv78xx0 platforms have no known
users and will be removed entirely.
- The mmp and davinci platforms have DT support for the important
machines and will become DT-only after this.
- s3c64xx, dove, orion5x, and pxa keep some board files to allow
those to be migrated over to DT more easily, but most board files
are getting removed now. DT support on these platforms is partially
working but requires changes to additional drivers for the other
boards.
- omap1, ep93xx, sa1100, footbridge and rpc have no DT support at
the moment but have some boards with known users. Removing the board
files that nobody uses should make it easier to try a DT conversion
if anyone cares.
There is no explicit timeline what happens with the boards that remain
after this removal, but I expect to revisit this in the future, and
with most boards gone, there will be a good time to do a treewide
review of platform drivers that never gained DT support and have no
remaining in-tree board files.
Link: https://lore.kernel.org/linux-arm-kernel/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/
-----BEGIN PGP SIGNATURE-----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=wd/l
-----END PGP SIGNATURE-----
Merge tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM boardfile deprecation from Arnd Bergmann:
"Over the past ten years, new machine support was based on device tree,
and an initial set of about 400 boards using ATAGS with boardfile for
booting were grandfathered in, with about half of them either removed
or converted to DT over time.
Based on the recent mailing list discussion I started, I have now
turned the findings into a set of patches that marks most board files
as 'depends on UNUSED_BOARD_FILES', leaving only 38 of the 196 boards.
For the boards that are marked as unused, there are two final chances
for potential users: The removal is scheduled to take place after the
longterm stable kernel at the end of 2022, so users can stay on that
version for another few years, and if anyone still has one of these
machines and is planning to keep updating kernels beyond that version,
they can speak up now to have their boards taken off the list again.
Waiting for the LTS release also makes sure that there will be at
least one longterm kernel that contains the recent multiplatform
conversion along while still supporting all legacy boards.
The short summary of the current status is:
- The s3c24xx, cns3xxx, iop32x and mv78xx0 platforms have no known
users and will be removed entirely.
- The mmp and davinci platforms have DT support for the important
machines and will become DT-only after this.
- s3c64xx, dove, orion5x, and pxa keep some board files to allow
those to be migrated over to DT more easily, but most board files
are getting removed now. DT support on these platforms is partially
working but requires changes to additional drivers for the other
boards.
- omap1, ep93xx, sa1100, footbridge and rpc have no DT support at the
moment but have some boards with known users. Removing the board
files that nobody uses should make it easier to try a DT conversion
if anyone cares.
There is no explicit timeline what happens with the boards that remain
after this removal, but I expect to revisit this in the future, and
with most boards gone, there will be a good time to do a treewide
review of platform drivers that never gained DT support and have no
remaining in-tree board files"
Link: https://lore.kernel.org/linux-arm-kernel/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/
* tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: cns3xxx: add CONFIG_UNUSED_BOARD_FILES dependency
ARM: iop32x: mark as unused
ARM: s3c: mark most board files as unused
ARM: omap1: add Kconfig dependencies for unused boards
ARM: sa1100: mark most boards as unused
ARM: footbridge: mark cats board for removal
ARM: mmp: mark all board files for removal
ARM: ep93xx: mark most board files as unused
ARM: davinci: mark all ATAGS board files as unused
ARM: orion: add ATAGS dependencies
ARM: pxa: add Kconfig dependencies for ATAGS based boards
ARM: add CONFIG_UNUSED_BOARD_FILES
ARM: add ATAGS dependencies to non-DT platforms
This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk drivers
that are still under review and will be merged through the corresponding
subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC
on the main chip, plus an I/O chip and memory in the same
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLo+24ACgkQmmx57+YA
GNkPVw//XAC/uK7WR4oz1D1YaPPNhEvFa6hV1gjGB7Iif72SzyDJmC+36MATU/AY
neQjCOLJMhxI0hpDGY9nLYe+aP1C6vD32zsjffjt/+s9em+YZZCUkRJuQ5xO3fID
Uk8ZAnCIcOqX9sjXr9ChW8irlcWFbKzhgWXnPqwQmycIaE7QVz1wx32dbc64YuAK
S+290U8wbj8bukr33TyZPMdYlfqNU3c1W+dCaeVsQlX1juoHEV3stmIjslRefd6X
Jre22YJE41VlPufZej76nHXuVnjKf54Oi347TcbPOWNDtEAIESt3mzKy+zICBT2p
v01rNBf0SogyOtSbWDPTFCAH9W9hujSOJIUOWpbOLaPdfElXxcoTBwj2e2LMoW0k
ke7YR1m6FKDam5GFU9Oe98CWIiVm/GnTA5mnhhETU1QTXQ3KeZ+Z8X779YuSWPv9
kJuOPRSk9NdcfRtxZz1vpCvhv/2hBbeBuz+GZi3bisMWdvVqS3lFqVbr6kziQbJZ
kE6KJH48FdL0VLVvuy+aNSF2umLT42b+5+cmQFuP2zePQgo1DEMKEtFXpZjQJbha
3iu3sHnieOFMLcbNzbqSz2im3yYNBjl1M5qoGEXaw3Rkzqiht0kMNvAa4LmAejbh
E+5BIczwWNbaUKgToV1ij65O4a78Bw98m2SIS7awEZC5MW/nXYA=
=7Id+
-----END PGP SIGNATURE-----
Merge tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM new SoC support from Arnd Bergmann:
"This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk
drivers that are still under review and will be merged through the
corresponding subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC on the main
chip, plus an I/O chip and memory in the same"
* tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig
ARM: sunplus: Add initial support for Sunplus SP7021 SoC
irqchip: Add Sunplus SP7021 interrupt controller driver
...
This branch includes the usual updates to defconfig files, enabling
additional driver support for the supported platforms.
There is also a global refresh for all of them that reorders the
lines according to the 'savedefconfig' output, but without removing
lines that are no longer part of the refresh.
I went through the most common removed lines to also address them
while making sure to catch renamed options and add them back
under the new name.
The boardfile deprecation branch is based on top of this to avoid
conflicts against removing the unused boardfile configs from the
generic defconfig files.
-----BEGIN PGP SIGNATURE-----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=2GbW
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"This branch includes the usual updates to defconfig files, enabling
additional driver support for the supported platforms.
There is also a global refresh for all of them that reorders the lines
according to the 'savedefconfig' output, but without removing lines
that are no longer part of the refresh.
I went through the most common removed lines to also address them
while making sure to catch renamed options and add them back under the
new name.
The boardfile deprecation branch is based on top of this to avoid
conflicts against removing the unused boardfile configs from the
generic defconfig files"
* tag 'arm-defconfig-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: defconfig: Sync some configs with savedefconfig
arm64: refresh defconfig file
ARM: defconfig: kill remnants of CONFIG_LEDS
ARM: defconfig: remove broken CONFIG_THUMB disables
ARM: defconfig: address renamed CONFIG_DEBUG_INFO=y
ARM: defconfig: remove stale CONFIG_ZBOOT_ROM entries
ARM: defconfig: remove irda remnants
ARM: refresh defconfig files
arm64: defconfig: Demote Qualcomm USB PHYs to modules
arm64: defconfig: Enable Qualcomm SC8280XP providers
ARM: multi_v7_defconfig: Update configs for BCM63138
arm64: defconfig: enable Qualcomm Bandwidth Monitor
arm64: defconfig: Enable Allwinner built in CODECs
arm64: defconfig: Enable qcom interconnect drivers
arm64: defconfig: Enable qcom ss & hs usb phy
arm64: defconfig: enable Qualcomm LPG leds driver
arm64: defconfig: Enable gpio-fan support
arm64: defconfig: Enable DRM_V3D
ARM: configs: Enable DRM_V3D
arm64: defconfig: Enable R8A779G0 SoC
...
Krzysztof Halasa has kept the cns3xxx platform working for a long time
but has moved away from working on it. The OpenWRT port was dropped in
2020, and support for the Gateworks Laguna platform never made it into
the mainline kernel, which only supports the reference design.
Further, the ARM11MPCore has an unresolved issue with instruction cache
coherency, and removing support for the remaining platforms using this
core would be the easiest solution.
Mark the entire platform as unused now, to be removed in early 2023 if
no users show up.
Cc: Krzysztof Halasa <khalasa@piap.pl>
Link: https://lore.kernel.org/lkml/20210616152326.GG22278@shell.armlinux.org.uk/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The iop32x platform has recently been converted to be part of
the multiplatform configuration, and it should be possible to
keep it alive for longer by making it boot from devicetree like
we did for the related ixp4xx platform.
However, it appears that no users remain at this point, so just
mark the entire platform depending on CONFIG_UNUSED_BOARD_FILES,
with the intention of removing it in early 2023.
If any users remain, please speak up now.
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform is already scheduled for removal in early 2023,
with s3c64xx meeting the same fate a year later.
Most of the s3c64xx board files appear to be unused, as the better
maintained ones already got converted to DT. The main exception is
the Wolfson Cragganmore board, which remains in use as the reference
design for Wolfson/Cirrus devices. As the other boards get removed,
this one stays around along with the DT based machines.
The s3c6400_defconfig file now disables the unused boards, while the
s3c24xx defconfig files all turn on CONFIG_UNUSED_BOARD_FILES to
remain usable.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Legacy board files with no known users are planned to get removed in
early 2023, and this covers the majority of the omap1 boards as well.
According to Tony, the actual users are all on OSK, Nokia770, and
AMS-Delta. Additionally, the sx1 and palmte boards are supported by qemu,
which is convenient for testing, so all five stay around past the initial
board removal.
As omap1 is now part of the multiplatform build and uses the common-clk
framework, it has become easier to convert these to use devicetree
based booting in the future.
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most Arm board files are unused and will be removed in early
2023 if no remaining users show up. For the sa1100 platform,
the machines that are still in use are:
- Russell's Assabet development board
- Linus' H3600 iPaq PocketPC
- Collie as the only qemu-supported board, to allow
testing by others
All remaining sa1100 boards are marked to depend on
CONFIG_UNUSED_BOARD_FILES to give potential users a
last chance to speak up.
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are three remaining footbridge boards, as the CO285 and the HP
personal server got removed already over the years.
Russell still uses his ebsa285, while both Linus and Marc have a NetWinder
that they use for testing. Nobody so far replied that they are using cats,
so it goes on the long list of machines to be removed in early 2023 if
it stays like this.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Linus Walleij <linusw@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The mmp platform supports both ATAGS based board files and DT
booting, but it appears that nobody has been interested in
board files for a long time.
Mark all of them for removal in early 2023 with a dependency
on CONFIG_UNUSED_BOARD_FILES, leaving only the DT support
for the future, unless someone pops up who uses them.
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the remaining ARM board files in the kernel have no known users,
and we plan to remove those in early 2023.
For ep93xx, Alexander Sverdlin still has access to the edb93xx family
of reference boards, while Nikita Shubin has a ts7250 and is working on
a device tree conversion for those. Hartley Sweeten has a
MACH_VISION_EP9307 that is still in use.
This is a total of nine machine definitions that we will keep
around, but these are all similar machines and are defined in only
two board files. The other six board files now have a dependency on
CONFIG_UNUSED_BOARD_FILES to indicate that they are likely going away.
Cc: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
From an earlier discussion, it appears that the davinci da8xx machines
that are still functional have already been converted to DT, while the
remaining board files are only kept because nobody has stepped up to
remove them.
Mark all these boards as 'depends on UNUSED_BOARD_FILES' with the
plan to remove them in early 2023 after the next longterm supported
kernel is out.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the remaining arm board files in the kernel are unused and will be
removed in early 2023 if no users step up. So far I got no user replies
about the orion5x and mv78xx0 machines, but these are still supported
in the default kernel of the Debian 'armel' (armv5 softfloat) distro,
and there is an active project on github that tries to keep some of
these machines working, and Mauri Sandberg is working on a DT conversion
for the D-Link DNS-323.
It appears the Debian-on-Buffalo project has not got the Terastation WXL
working in a few years, and the other mv78xx0 machines are just the
reference designs, so I assume none of these have remaining users.
For the Orion5x family, the same is probably true for its reference
implementations (RD88Fxxxxx, DB88F281) and the machines with less than
64MB of memory (WNR854T, WRT350N v2).
The remaining nine machines are now scheduled to be kept for at least
2023, hopefully to be replaced with DT based versions.
The mv78xx0_defconfig file needs to enable CONFIG_UNUSED_BOARD_FILES
to still build, while the other affected defconfig files lose the
specific boards.
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Mauri Sandberg <maukka@ext.kapsi.fi>
Link: https://github.com/1000001101000/Debian_on_Buffalo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the traditional board files are no longer used by anyone and
will be removed next year, while the DT based machine support remains.
Adding a CONFIG_ATAGS dependency around all the board files means
that they now actaully get disabled when ATAGS support is left out,
and the individual boards that have no known users are marked
as depending on CONFIG_UNUSED_BOARD_FILES, with the plan to remove
them in early 2023 unless someone else shows interest.
Laurence de Bruxelles intends to work on converting the Spitz/Akita/Borzoi
family of Sharp Zaurus SL machines to DT, to make that easier those
remain for the moment.
In addition, the "Gumstix" machine is the one that is supported in
qemu with 256MB of RAM, which makes it particularly nice for testing,
I'm leaving it in hoping that someone can take care of converting it to
DT as well.
Finally, Marc Zyngier is still able to test the Zeus and Viper machines,
so these could be saved as well if anyone wants to conver them to DT.
This seems less likely, so I'm marking them as unused for the time being.
For the defconfig files, both the pxa3xx_defconfig and pxa_defconfig
now only enable the boards that are not marked as unused, while all the
other ones explicitly enable CONFIG_UNUSED_BOARD_FILES to still allow
building the kernels.
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Laurence de Bruxelles <lfdebrux@gmail.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_LEDS was replaced by CONFIG_NEW_LEDS over ten years ago with commit
fa8bbb13ab ("ARM: use new LEDS CPU trigger stub to replace old one"),
but some defconfig files still reference it.
Replace it and its sub-options with the corresponding new versions.
Some of these machines may not actually have a new-style LED driver,
and I did not check them individually as most of the machines are
going away soon anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 1515b186c2 ("ARM: make configuration of userspace
Thumb support an expert option"), CONFIG_THUMB cannot be disabled
unless one turns on CONFIG_EXPERT first.
This is probably for the better, so remove the statements that
turn it off.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the
explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT,
DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5.
This was actually not what I had in mind when I suggested making
it a 'choice' statement, but it's too late to change again now,
and the Kconfig logic is more sensible in the new form.
Change any defconfig file that had CONFIG_DEBUG_INFO enabled
but did not pick DWARF4 or DWARF5 explicitly to now pick the toolchain
default.
Fixes: f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The default is always 0x0 after commit 39c3e30456 ("ARM: 8984/1:
Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0"), so any
defconfig file that has these two lines can now drop them to reduce
the diff against the 'make savedefconfig' version.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A couple of ARM defconfig files (and one for sh) still refer to the
IRDA options that were removed in linux-4.14. Remove the entries
as well now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A lot of Kconfig options have changed over the years, and we tend
to not do a blind 'make defconfig' to refresh the files, to ensure
we catch options that should not have gone away.
I used some a bit of scripting to only rework the bits where an
option moved around in any of the defconfig files, without also
dropping any of the other lines, to make it clearer which options
we no longer have.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
pull the following:
- Peter enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
to load the proper GPU module driver
- William updates the multi_v7_defconfig to replace the enabling of
CONFIG_ARCH_BCM_63XX with CONFIG_ARCH_BCMBCA which is how this platform
is now supported
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmLMTLoACgkQh9CWnEQH
BwREZQ//VBLjwNRlG5ABfcGRBLIrfQdtyr3zgu0yI836Yp7lCyjNGnx0BBSwtYpN
cXnuS9gB4Snh5NaqVRIc/7IYEs96FP9yZhklZM1LucT9JtieXb1aYSkVGA6i1JIw
2jaE/4Ygi/4D1taI6Mae/9qlfMXlVjVmsTl18nDQu8Pa7o0HBImDCAeluTp/x0HS
08buMR1Zhb2Mnj+1SS/nks2t5rx6DWe2Q/05+nmBrDFIUSmGOcBoxcVsKlpAP8fz
Z3RkiuJr7A3XRfymbICypGpmDIFcZKzCPMvbmgAtEUzCzBGxQzb7RvVt7nW9dztU
ZCZKdyDMP2bsWtc+dQqjIVY1tFwSIvM4oqac4FyZZIM+P5l3UiVUEXB9eI8pHhzd
aWoHjtTENCkpcN16JV2mByi4cZd3xyYZiXZXjAmdX+6yN0VgoI3elz5oDospQFBc
OtZHgZKDsSB5KwJVsEo9npEZmBdD2nWEHGyaNWiTvxe2DMM5uuOLp3ErbmzAFEQ0
y4GNg33cL2rLBYOk3XhFiJTMCVCnkKsW9AbyWsrhhYZOAOtYKraaJgY3fiHdocU4
jvajFEHobu6yBoKEFzEZQ/rqy3JEomFPw6uzXdbFx6w580X7fuIvowx9f//0cgv5
BpvcGS/wROitzsFHSP6a+d/Dvvl4siiRNtZeFOjyJVFH0jnUFaQ=
=NP7q
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=EGHr
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/defconfig' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains ARM SoCs defconfig changes for 5.20, please
pull the following:
- Peter enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
to load the proper GPU module driver
- William updates the multi_v7_defconfig to replace the enabling of
CONFIG_ARCH_BCM_63XX with CONFIG_ARCH_BCMBCA which is how this platform
is now supported
* tag 'arm-soc/for-5.20/defconfig' of https://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: Update configs for BCM63138
ARM: configs: Enable DRM_V3D
Link: https://lore.kernel.org/r/20220711164451.3542127-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently, when booting Linux on a imx28-evk board there is
no display activity.
Enable CONFIG_FB which is nowadays required for CONFIG_DRM_PANEL_LVDS,
CONFIG_DRM_PANEL_SIMPLE, CONFIG_DRM_PANEL_SEIKO_43WVF1G,
CONFIG_FB_MODE_HELPERS, CONFIG_BACKLIGHT_PWM, CONFIG_BACKLIGHT_GPIO,
CONFIG_FRAMEBUFFER_CONSOLE, CONFIG_LOGO, CONFIG_FONTS, CONFIG_FONT_8x8
and CONFIG_FONT_8x16.
Based on commit c54467482f ("ARM: imx_v6_v7_defconfig: enable fb").
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 5d9db88376 ("efi: Add support for a UEFI variable filesystem")
dated Oct 5, 2012, introduced a new efivarfs pseudo-filesystem to
replace the efivars sysfs interface that was used up to that point to
expose EFI variables to user space.
The main problem with the sysfs interface was that it only supported up
to 1024 bytes of payload per file, whereas the underlying variables
themselves are only bounded by a platform specific per-variable and
global limit that is typically much higher than 1024 bytes.
The deprecated sysfs interface is only enabled on x86 and Itanium, other
EFI enabled architectures only support the efivarfs pseudo-filesystem.
So let's finally rip off the band aid, and drop the old interface
entirely. This will make it easier to refactor and clean up the
underlying infrastructure that is shared between efivars, efivarfs and
efi-pstore, and is long overdue for a makeover.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
BCM2711, the SoC used on the Raspberry Pi 4 has a different 3D
render GPU IP than its predecessors. Enable it it on multi v7
and bcm2835 configs.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
With all the header files out of the way, and the clock driver
converted to the common framework, nothing stops us from building
OMAP together with the other platforms.
As usual, the decompressor support is a victim here, and is
only available when CONFIG_DEBUG_LL is configured for the
particular board.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is the second part of the general SoC updates, containing
everything that did not make it in the initial pull request,
or that came in as a bugfix later.
- Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip, including
a new machine using an ASPEED BMC.
- More DT fixes from Krzysztof Kozlowski across platforms
- A new SoC platform for the GXP baseboard management controller,
used in current server products from HPE.
-----BEGIN PGP SIGNATURE-----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=2qok
-----END PGP SIGNATURE-----
Merge tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"This is the second part of the general SoC updates, containing
everything that did not make it in the initial pull request, or that
came in as a bugfix later.
- Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip,
including a new machine using an ASPEED BMC.
- More DT fixes from Krzysztof Kozlowski across platforms
- A new SoC platform for the GXP baseboard management controller,
used in current server products from HPE"
* tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits)
ARM: configs: Enable more audio support for i.MX
tee: optee: Pass a pointer to virt_addr_valid()
arm64: dts: rockchip: rename Quartz64-A bluetooth gpios
arm64: dts: rockchip: add clocks property to cru node rk3368
arm64: dts: rockchip: add clocks property to cru node rk3308
arm64: dts: rockchip: add clocks to rk356x cru
ARM: dts: rockchip: add clocks property to cru node rk3228
ARM: dts: rockchip: add clocks property to cru node rk3036
ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
ARM: dts: rockchip: add clocks property to cru node rk3288
ARM: dts: rockchip: Remove "amba" bus nodes from rv1108
ARM: dts: rockchip: add clocks property to cru node rv1108
arm64: dts: sprd: use new 'dma-channels' property
ARM: dts: da850: use new 'dma-channels' property
ARM: dts: pxa: use new 'dma-channels/requests' properties
soc: ixp4xx/qmgr: Fix unused match warning
ARM: ep93xx: Make ts72xx_register_flash() static
ARM: configs: enable support for Kontron KSwitch D10
ep93xx: clock: Do not return the address of the freed memory
arm64: dts: intel: add device tree for n6000
...
The second part of the multiplatform changes now converts the
Intel/Marvell PXA platform along with the rest. The patches went through
several rebases before the merge window as bugs were found, so they
remained separate.
This has to touch a lot of drivers, in particular the touchscreen,
pcmcia, sound and clk bits, to detach the driver files from the
platform and board specific header files.
-----BEGIN PGP SIGNATURE-----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=cnSb
-----END PGP SIGNATURE-----
Merge tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM multiplatform updates from Arnd Bergmann:
"The second part of the multiplatform changes now converts the
Intel/Marvell PXA platform along with the rest. The patches went
through several rebases before the merge window as bugs were found, so
they remained separate.
This has to touch a lot of drivers, in particular the touchscreen,
pcmcia, sound and clk bits, to detach the driver files from the
platform and board specific header files"
* tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
ARM: pxa/mmp: remove traces of plat-pxa
ARM: pxa: convert to multiplatform
ARM: pxa/sa1100: move I/O space to PCI_IOBASE
ARM: pxa: remove support for MTD_XIP
ARM: pxa: move mach/*.h to mach-pxa/
ARM: PXA: fix multi-cpu build of xsc3
ARM: pxa: move plat-pxa to drivers/soc/
ARM: mmp: rename pxa_register_device
ARM: mmp: remove tavorevb board support
ARM: pxa: remove unused mach/bitfield.h
ARM: pxa: move clk register definitions to driver
ARM: pxa: move smemc register access from clk to platform
cpufreq: pxa3: move clk register access to clk driver
ARM: pxa: remove get_clk_frequency_khz()
ARM: pxa: pcmcia: move smemc configuration back to arch
ASoC: pxa: i2s: use normal MMIO accessors
ASoC: pxa: ac97: use normal MMIO accessors
ASoC: pxa: use pdev resource for FIFO regs
Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops
Input: wm97xx - switch to using threaded IRQ
...
The generic audio card for Freescale platforms is used by a wide range
of i.MX systems and also has selects for the various audio controllers
used on them so will help with systems that don't use that specific card
too.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20220513121258.168364-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Kontron KSwitch D10 is based on a Microchip LAN9668 SoC. It is a
managed ethernet network switch with either 8 copper ports or 6 copper
ports and 2 SFP cages.
Enable all required kconfig symbols, either as module where possible or
compiled-in where it is not possible.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220518141542.531148-1-michael@walle.cc'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Patch series from Nick Hawkins:
"The GXP is the HPE BMC SoC that is used in the majority of HPE current
generation servers. Traditionally the asic will last multiple
generations of server before being replaced.
Info about SoC:
HPE GXP is the name of the HPE Soc. This SoC is used to implement many
BMC features at HPE. It supports ARMv7 architecture based on the Cortex
A9 core. It is capable of using an AXI bus to which a memory controller
is attached. It has multiple SPI interfaces to connect boot flash and
BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It has
multiple i2c engines to drive connectivity with a host infrastructure.
The initial patches enable the watchdog and timer enabling the host to
be able to boot."
* hpe/gxp-soc:
MAINTAINERS: Introduce HPE GXP Architecture
ARM: dts: Introduce HPE GXP Device tree
dt-bindings: arm: hpe: add GXP Support
dt-bindings: timer: hpe,gxp-timer: Add HPE GXP Timer and Watchdog
clocksource/drivers/timer-gxp: Add HPE GXP Timer
watchdog: hpe-wdt: Introduce HPE GXP Watchdog
ARM: configs: multi_v7_defconfig: Add HPE GXP ARCH
ARM: hpe: Introduce the HPE GXP architecture
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This series has been 12 years in the making, it mostly finishes the
work that was started with the founding of Linaro to clean up platform
support in the kernel.
The largest change here is a cleanup of the omap1 platform, which
is the final ARM machine type to get converted to the common-clk
subsystem. All the omap1 specific drivers are now made independent of the
mach/*.h headers to allow the platform to be part of a generic ARMv4/v5
multiplatform kernel. The last bit that enables this support is still
missing here while we wait for some last dependencies to make it into
the mainline kernel through other subsystems.
The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost
at the point of allowing multiplatform kernels, this work gets completed
here along with a few additional cleanup. At the same time, the s3c24xx
and s3c64xx are now deprecated and expected to get removed in the future.
The PXA and OMAP1 bits are in a separate branch because of dependencies.
Once both branches are merged, only the three Intel StrongARM platforms
(RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels,
and there are no plans to include these.
-----BEGIN PGP SIGNATURE-----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=CTtN
-----END PGP SIGNATURE-----
Merge tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARMv4T/v5 multiplatform support from Arnd Bergmann:
"This series has been 12 years in the making, it mostly finishes the
work that was started with the founding of Linaro to clean up platform
support in the kernel.
The largest change here is a cleanup of the omap1 platform, which is
the final ARM machine type to get converted to the common-clk
subsystem. All the omap1 specific drivers are now made independent of
the mach/*.h headers to allow the platform to be part of a generic
ARMv4/v5 multiplatform kernel.
The last bit that enables this support is still missing here while we
wait for some last dependencies to make it into the mainline kernel
through other subsystems.
The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost
at the point of allowing multiplatform kernels, this work gets
completed here along with a few additional cleanup. At the same time,
the s3c24xx and s3c64xx are now deprecated and expected to get removed
in the future.
The PXA and OMAP1 bits are in a separate branch because of
dependencies. Once both branches are merged, only the three Intel
StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100)
need separate kernels, and there are no plans to include these"
* tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
ARM: ixp4xx: Consolidate Kconfig fixing issue
ARM: versatile: Add missing of_node_put in dcscb_init
ARM: config: Refresh IXP4xx config after multiplatform
ARM: omap1: add back omap_set_dma_priority() stub
ARM: omap: fix missing declaration warnings
ARM: omap: fix address space warnings from sparse
ARM: spear: remove include/mach/ subdirectory
ARM: davinci: remove include/mach/ subdirectory
ARM: omap2: remove include/mach/ subdirectory
integrator: remove empty ap_init_early()
ARM: s3c: fix include path
MAINTAINERS: omap1: Add Janusz as an additional maintainer
ARM: omap1: htc_herald: fix typos in comments
ARM: OMAP1: fix typos in comments
ARM: OMAP1: clock: Remove noop code
ARM: OMAP1: clock: Remove unused code
ARM: OMAP1: clock: Fix UART rate reporting algorithm
ARM: OMAP1: clock: Fix early UART rate issues
ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF
ARM: omap1: fix build with no SoC selected
...
Lots of smaller additions to the defconfig files for both 32-bit
and 64-bit arm platforms, enabling drivers that are now usable
on common hardware, and a few options to make it possible to boot
a file system image using systemd.
-----BEGIN PGP SIGNATURE-----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=+8LA
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"Lots of smaller additions to the defconfig files for both 32-bit and
64-bit arm platforms, enabling drivers that are now usable on common
hardware, and a few options to make it possible to boot a file system
image using systemd"
* tag 'arm-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (39 commits)
ARM: configs: Enable ASoC AC'97 glue
ARM: configs: Enable audio on BeagleBone Black in multi_v7_defconfig
ARM: configs: at91: Enable AUTOFS_FS required by systemd
ARM: configs: at91: Enable options required for systemd
ARM: configs: at91: sama7: enable CONFIG_RESET_CONTROLLER
ARM: configs: at91: sama7: add MCHP PDMC and DMIC drivers
ARM: configs: at91: sama7: Enable MTD_UBI_BLOCK
ARM: configs: at91: sama7: Enable MTD_UBI_FASTMAP
ARM: configs: at91: sama7: add xisc and csi2dc
ARM: multi_v7_defconfig: add atmel video pipeline modules
ARM: configs: at91: Remove MTD_BLOCK and use MTD_UBI_BLOCK for read only block FS
arm64: defconfig: Enable the WM8524 codec driver
arm64: defconfig: Enable modules for arm displays
arm: nomadik: drop selecting obsolete CLKSRC_NOMADIK_MTU_SCHED_CLOCK
arm64: defconfig: Enable Renesas RZ/V2M SoC
arm64: defconfig: Enable ARCH_R9A07G043
arm64: defconfig: Enable configs for DisplayPort on J721e
arm64: defconfig: Build Tegra ASRC module
ARM: multi_v7_defconfig: enable CONFIG_ARCH_BCMBCA in armv7 defconfig
arm: mediatek: select arch timer for mt7629
...
These updates are for platform specific code in arch/arm/, mostly fixing
minor issues. The at91 platform gains support for better power
management on the lan966 platform and new firmware on the sama5
platform. The mediatek soc drivers in turn are enabled for the new
mt8195 SoC.
-----BEGIN PGP SIGNATURE-----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=Eoh1
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull 32-bit ARM SoC updates from Arnd Bergmann:
"These updates are for platform specific code in arch/arm/, mostly
fixing minor issues.
The at91 platform gains support for better power management on the
lan966 platform and new firmware on the sama5 platform. The mediatek
soc drivers in turn are enabled for the new mt8195 SoC"
* tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
ARM: at91: debug: add lan966 support
ARM: at91: pm: add support for sama5d2 secure suspend
ARM: at91: add code to handle secure calls
ARM: at91: Kconfig: implement PIT64B selection
ARM: at91: pm: add quirks for pm
ARM: at91: pm: use kernel documentation style
ARM: at91: pm: introduce macros for pm mode replacement
ARM: at91: pm: keep documentation inline with structure members
orion5x: fix typos in comments
ARM: hisi: Add missing of_node_put after of_find_compatible_node
ARM: shmobile: rcar-gen2: Drop comma after OF match table sentinel
ARM: shmobile: Drop commas after dt_compat sentinels
soc: mediatek: mutex: remove mt8195 MOD0 and SOF0 definition
MAINTAINERS: Add Broadcom BCMBCA entry
arm: bcmbca: add arch bcmbca machine entry
MAINTAINERS: Broadcom internal lists aren't maintainers
dt-bindings: pwrap: mediatek: Update pwrap document for mt8195
soc: mediatek: add DDP_DOMPONENT_DITHER0 enum for mt8195 vdosys0
soc: mediatek: add mtk-mutex support for mt8195 vdosys0
soc: mediatek: add mtk-mmsys support for mt8195 vdosys0
...
Not much dramatic changes at this time, but we've received quite
a lot of changes for ASoC, while there are still a few fixes and
quirks for usual HD- and USB-auido. Here are some highlights.
* ASoC:
- Overhaul of endianness specification for data formats, avoiding
needless restrictions due to CODECs
- Initial stages of Intel AVS driver merge
- Introduction of v4 IPC mechanism for SOF
- TDM mode support for AK4613
- Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
* Others
- A few regression fixes after the USB-audio endpoint management
refactoring
- More enhancements for Cirrus HD-audio codec support (still ongoing)
- Addition of generic serial MIDI driver
-----BEGIN PGP SIGNATURE-----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=5qBk
-----END PGP SIGNATURE-----
Merge tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Not much dramatic changes at this time, but we've received quite a lot
of changes for ASoC, while there are still a few fixes and quirks for
usual HD- and USB-auido. Here are some highlights.
ASoC:
- Overhaul of endianness specification for data formats, avoiding
needless restrictions due to CODECs
- Initial stages of Intel AVS driver merge
- Introduction of v4 IPC mechanism for SOF
- TDM mode support for AK4613
- Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
Others:
- A few regression fixes after the USB-audio endpoint management
refactoring
- More enhancements for Cirrus HD-audio codec support (still ongoing)
- Addition of generic serial MIDI driver"
* tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits)
ALSA: hda/realtek - Add new type for ALC245
ALSA: usb-audio: Configure sync endpoints before data
ALSA: ctxfi: fix typo in comment
ALSA: cs5535audio: fix typo in comment
ALSA: ctxfi: Add SB046x PCI ID
ALSA: usb-audio: Add missing ep_idx in fixed EP quirks
ALSA: usb-audio: Workaround for clock setup on TEAC devices
ALSA: lola: Bounds check loop iterator against streams array size
ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv()
ASoC: rt1308-sdw: add the default value of register 0xc320
ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic
ASoC: rt9120: Fix 3byte read, valule offset typo
ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver.
ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver
ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR'
ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get()
ASoC: SOF: mediatek: remove duplicate include in mt8195.c
ASoC: SOF: mediatek: Add mt8195 debug dump
ASoC: SOF: mediatek: Add mediatek common debug dump
...
Enable HPE GXP Architecture and its watchdog for base support for HPE
GXP SoCs.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AC'97 was quite commonly used on at least i.MX designs so enable the
glue code that allows use of AC'97 with ASoC based designs to improve
testing coverage.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220513120632.168148-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables the Qualcomm random number generator and hardware crypto
drivers, as well as DebugFS support, in the qcom defconfig.
-----BEGIN PGP SIGNATURE-----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=/s3v
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmJ5gmUACgkQmmx57+YA
GNnsag/+K5z80u2PRQhUgb65qBhN6+ajxeXYDGuhKom7BCnJowh0RddRGTweqlSn
2EsQqqHuPT1Hi420jVd//fcy2ge4z+fuGV4cPCWYzL+3SxjQLynVogtQq3kXo39e
zqFuLOEdxMDRU075Otp+VqE7JG9t0ooVjSc/hMoCgsiRDwjyIVb+xQLnEUwGMUou
Wt/1tCmTVfxGLU9Lwh+n1AAnBsE0gwiDeSKoMNr3JaAxmacNZJOfOmSyFxd84Rcd
RQIE5J+74NYm2YcTBvTZjHmma9eDINaRlQ3+lY6aHKLXXDTNFAyb7KVKmqohTHlQ
X7yfPJj95E5Jh9y1FeGe2Fs8oZwwceA2zw0hlxyLfEpiHus+kD6YHSlcNsu/JNiD
ESerRxx2QTaBWYr8dGOVC3xWU+cS/wN6+HquNTrneTNLNIim/8EMPfU82yjVP2EX
M3/4Jr5p8IfNiTapmxPOZN+/2/wlVdyNanm50NkHlIkzG0dW+qAlLvBYlhmZ0+jI
NYUu3EZCA+/amKGctqCrvLcxlWcN+SJbRtCQXXgaQIi2Tv6pFP7Y0zomYHLAQqea
n4N3ZNXgiM1lGv1JRi6Eo4pzjuPp3Y1zz/tkFcMXow1eyno/cN2K6ZfHYv9pubgH
ZQCyhnAV0ITVttX+mXL9UWsacSw14xEIeA98cK2fdSYHW6SoXnQ=
=E9Ka
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM defconfig updates for v5.19
This enables the Qualcomm random number generator and hardware crypto
drivers, as well as DebugFS support, in the qcom defconfig.
* tag 'qcom-defconfig-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom_defconfig: enable debug fs support
ARM: qcom_defconfig: enable options for Qualcomm random number generator
Link: https://lore.kernel.org/r/20220509182209.317208-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable the WM8524 codec driver as module in arm64 defconfig for audio
support on imx8mn-evk board.
- Enable the ADC part of the STMPE MFD in imx_v6_v7_defconfig, as the
SoM Apalis/Colibri iMX6 use the ADC of a STMPE 811.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmJ3OOMUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM43JwgAgKOb0UndVfyEOV02LPQoVYiEN0P9
cKbenz/IpXFT0fDYyTezg1BmU7T5KH4dg8R40JZdmeOjhEkpigXs1EEVEeBy9Dws
j7RjV+vL/i4shN4j6dYXsWGxLf3E96eNIqMfy4kRfJygTbg/99sgC/YT29OI1TJO
uyJJHqmBvLcfG4kAoYc3W17PM37JD9T6A3DvDZTn5PRgBd8ywK5ydyrqgKgTG6f9
CD6nIyW396rC26+v0Gzrc/0zgxGjLJznD2iiGxyR8Sa6ILYdyXQEIsK5XOst9/PS
E0EnM3HA3icr1bvUUyztdRBuRlYq/BR73GCAWHSpi55Nfh5bT3dCHrpZwQ==
=kFqE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pAvl
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.19:
- Enable the WM8524 codec driver as module in arm64 defconfig for audio
support on imx8mn-evk board.
- Enable the ADC part of the STMPE MFD in imx_v6_v7_defconfig, as the
SoM Apalis/Colibri iMX6 use the ADC of a STMPE 811.
* tag 'imx-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable the WM8524 codec driver
ARM: imx_v6_v7_defconfig: Enable the ADC part of the STMPE MFD
Link: https://lore.kernel.org/r/20220508033843.2773685-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The BeagleBone Black supports audio over HDMI, using a combination of the
DaVinci McASP (used for audio by a very large proportion of DaVinci systems
with audio support) and a TDA998x device driving the HDMI link (this is a
very widely used driver). Build both drivers as modules in multi_v7_defconfig
so they can be more easily included in testing.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220506222646.1671474-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PXA is now ready to be built into a single kernel with all the
other ARMv5 platforms, so change the Kconfig bit to finish it
off. The mach/uncompress.h support is the last bit that goes away,
getting replaced with the normal DEBUG_LL based approach.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains two updates to the default configuration needed because of
a Kconfig symbol name change. This fixes a failure that was detected in
the NVIDIA automated test farm.
-----BEGIN PGP SIGNATURE-----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=aOGl
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=FYRO
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.19-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration fixes for v5.18
This contains two updates to the default configuration needed because of
a Kconfig symbol name change. This fixes a failure that was detected in
the NVIDIA automated test farm.
* tag 'tegra-for-5.19-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: config: multi v7: Enable NVIDIA Tegra video decoder driver
ARM: tegra_defconfig: Update CONFIG_TEGRA_VDE option
Link: https://lore.kernel.org/r/20220506143005.3916655-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
