Commit graph

8 commits

Author SHA1 Message Date
Masahiro Yamada
172caf1993 kbuild: remove redundant target cleaning on failure
Since commit 9c2af1c737 ("kbuild: add .DELETE_ON_ERROR special
target"), the target file is automatically deleted on failure.

The boilerplate code

  ... || { rm -f $@; false; }

is unneeded.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06 09:46:51 +09:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Jarkko Sakkinen
5ccbdbf987 modsign: add markers to endif-statements in certs/Makefile
It's a bit hard for eye to track certs/Makefile if you are not
accustomed to it. This commit adds comments to key endif statements in
order to help to keep the context while reading this file.

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-07-14 11:01:37 +10:00
David Howells
734114f878 KEYS: Add a system blacklist keyring
Add the following:

 (1) A new system keyring that is used to store information about
     blacklisted certificates and signatures.

 (2) A new key type (called 'blacklist') that is used to store a
     blacklisted hash in its description as a hex string.  The key accepts
     no payload.

 (3) The ability to configure a list of blacklisted hashes into the kernel
     at build time.  This is done by setting
     CONFIG_SYSTEM_BLACKLIST_HASH_LIST to the filename of a list of hashes
     that are in the form:

	"<hash>", "<hash>", ..., "<hash>"

     where each <hash> is a hex string representation of the hash and must
     include all necessary leading zeros to pad the hash to the right size.

The above are enabled with CONFIG_SYSTEM_BLACKLIST_KEYRING.

Once the kernel is booted, the blacklist keyring can be listed:

	root@andromeda ~]# keyctl show %:.blacklist
	Keyring
	 723359729 ---lswrv      0     0  keyring: .blacklist
	 676257228 ---lswrv      0     0   \_ blacklist: 123412341234c55c1dcc601ab8e172917706aa32fb5eaf826813547fdf02dd46

The blacklist cannot currently be modified by userspace, but it will be
possible to load it, for example, from the UEFI blacklist database.

A later commit will make it possible to load blacklisted asymmetric keys in
here too.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-04-03 16:07:24 +01:00
Arnd Bergmann
5d06ee20b6 modsign: hide openssl output in silent builds
When a user calls 'make -s', we can assume they don't want to
see any output except for warnings and errors, but instead
they see this for a warning free build:

 ###
 ### Now generating an X.509 key pair to be used for signing modules.
 ###
 ### If this takes a long time, you might wish to run rngd in the
 ### background to keep the supply of entropy topped up.  It
 ### needs to be run as root, and uses a hardware random
 ### number generator if one is available.
 ###
 Generating a 4096 bit RSA private key
 .................................................................................................................................................................................................................................++
 ..............................................................................................................................++
 writing new private key to 'certs/signing_key.pem'
 -----
 ###
 ### Key pair generated.
 ###

The output can confuse simple build testing scripts that just check
for an empty build log.

This patch silences all the output:
 - "echo" is changed to "@$(kecho)", which is dropped when "-s" gets
   passed
 - the openssl command itself is only printed with V=1, using the
   $(Q) macro
 - The output of openssl gets redirected to /dev/null on "-s" builds.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
2016-02-26 11:16:38 +00:00
David Woodhouse
3ee550f12c modsign: Handle signing key in source tree
Since commit 1329e8cc69 ("modsign: Extract signing cert from
CONFIG_MODULE_SIG_KEY if needed"), the build system has carefully coped
with the signing key being specified as a relative path in either the
source or or the build trees.

However, the actual signing of modules has not worked if the filename
is relative to the source tree.

Fix that by moving the config_filename helper into scripts/Kbuild.include
so that it can be used from elsewhere, and then using it in the top-level
Makefile to find the signing key file.

Kill the intermediate $(MODPUBKEY) and $(MODSECKEY) variables too, while
we're at it. There's no need for them.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2015-08-14 16:32:52 +01:00
David Woodhouse
62172c81f2 modsign: Use if_changed rule for extracting cert from module signing key
We couldn't use if_changed for this before, because it didn't live in
the kernel/ directory so we couldn't add it to $(targets). It was easier
just to leave it as it was.

Now it's in the certs/ directory we can use if_changed, the same as we
do for the trusted certificate list.

Aside from making things consistent, this means we don't need to depend
explicitly on the include/config/module/sig/key.h file. And we also get
to automatically do the right thing and re-extract the cert if the user
does odd things like using a relative filename and then playing silly
buggers with adding/removing that file in both the source and object
trees. We always favour the one in the object tree if it exists, and
now we'll correctly re-extract the cert when it changes. Previously we'd
*only* re-extract the cert if the config option changed, even if the
actual file we're using did change.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2015-08-14 16:06:19 +01:00
David Howells
cfc411e7ff Move certificate handling to its own directory
Move certificate handling out of the kernel/ directory and into a certs/
directory to get all the weird stuff in one place and move the generated
signing keys into this directory.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-14 16:06:13 +01:00