Cleanup code uses while (cpu++ < cpu_cnt) for closing fds, which means
it starts iterating from 1 for closing fds. If the first fd is -1, it
skips over it and closes garbage fds (typically zero) in the remaining
array. This leads to test failures for future tests when they end up
storing fd 0 (as the slot becomes free due to close(0)) in ldimm64's BTF
fd, ending up trying to match module BTF id with vmlinux.
This was observed as spurious CI failure for the ksym_module_libbpf and
module_attach tests. The test ends up closing fd 0 and breaking libbpf's
assumption that module BTF fd will always be > 0, which leads to the
kernel thinking that we are pointing to a BTF ID in vmlinux BTF.
Fixes: 025bd7c753 (selftests/bpf: Add test for bpf_get_branch_snapshot)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210927145941.1383001-12-memxor@gmail.com
clang build kernel failed the selftest probe_user.
$ ./test_progs -t probe_user
$ ...
$ test_probe_user:PASS:get_kprobe_res 0 nsec
$ test_probe_user:FAIL:check_kprobe_res wrong kprobe res from probe read: 0.0.0.0:0
$ #94 probe_user:FAIL
The test attached to kernel function __sys_connect(). In net/socket.c, we have
int __sys_connect(int fd, struct sockaddr __user *uservaddr, int addrlen)
{
......
}
...
SYSCALL_DEFINE3(connect, int, fd, struct sockaddr __user *, uservaddr,
int, addrlen)
{
return __sys_connect(fd, uservaddr, addrlen);
}
The gcc compiler (8.5.0) does not inline __sys_connect() in syscall entry
function. But latest clang trunk did the inlining. So the bpf program
is not triggered.
To make the test more reliable, let us kprobe the syscall entry function
instead. Note that x86_64, arm64 and s390 have syscall wrappers and they have
to be handled specially.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210929033000.3711921-1-yhs@fb.com
"?:" is a GNU C extension, some environment has warning flags for its
use, or even prohibit it directly. This patch avoid triggering these
problems by simply expand it to its full form, no functionality change.
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210928184221.1545079-1-fallentree@fb.com
Update "sk_lookup/" definition to be a stand-alone type specifier,
with backwards-compatible prefix match logic in non-libbpf-1.0 mode.
Currently in selftests all the "sk_lookup/<whatever>" uses just use
<whatever> for duplicated unique name encoding, which is redundant as
BPF program's name (C function name) uniquely and descriptively
identifies the intended use for such BPF programs.
With libbpf's SEC_DEF("sk_lookup") definition updated, switch existing
sk_lookup programs to use "unqualified" SEC("sk_lookup") section names,
with no random text after it.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-11-andrii@kernel.org
Implement strict ELF section name handling for BPF programs. It utilizes
`libbpf_set_strict_mode()` framework and adds new flag: LIBBPF_STRICT_SEC_NAME.
If this flag is set, libbpf will enforce exact section name matching for
a lot of program types that previously allowed just partial prefix
match. E.g., if previously SEC("xdp_whatever_i_want") was allowed, now
in strict mode only SEC("xdp") will be accepted, which makes SEC("")
definitions cleaner and more structured. SEC() now won't be used as yet
another way to uniquely encode BPF program identifier (for that
C function name is better and is guaranteed to be unique within
bpf_object). Now SEC() is strictly BPF program type and, depending on
program type, extra load/attach parameter specification.
Libbpf completely supports multiple BPF programs in the same ELF
section, so multiple BPF programs of the same type/specification easily
co-exist together within the same bpf_object scope.
Additionally, a new (for now internal) convention is introduced: section
name that can be a stand-alone exact BPF program type specificator, but
also could have extra parameters after '/' delimiter. An example of such
section is "struct_ops", which can be specified by itself, but also
allows to specify the intended operation to be attached to, e.g.,
"struct_ops/dctcp_init". Note, that "struct_ops_some_op" is not allowed.
Such section definition is specified as "struct_ops+".
This change is part of libbpf 1.0 effort ([0], [1]).
[0] Closes: https://github.com/libbpf/libbpf/issues/271
[1] https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#stricter-and-more-uniform-bpf-program-section-name-sec-handling
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-10-andrii@kernel.org
Complete SEC() table refactoring towards unified form by rewriting
BPF_APROG_SEC and BPF_EAPROG_SEC definitions with
SEC_DEF(SEC_ATTACHABLE_OPT) (for optional expected_attach_type) and
SEC_DEF(SEC_ATTACHABLE) (mandatory expected_attach_type), respectively.
Drop BPF_APROG_SEC, BPF_EAPROG_SEC, and BPF_PROG_SEC_IMPL macros after
that, leaving SEC_DEF() macro as the only one used.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-9-andrii@kernel.org
Refactor ELF section handler definitions table to use a set of flags and
unified SEC_DEF() macro. This allows for more succinct and table-like
set of definitions, and allows to more easily extend the logic without
adding more verbosity (this is utilized in later patches in the series).
This approach is also making libbpf-internal program pre-load callback
not rely on bpf_sec_def definition, which demonstrates that future
pluggable ELF section handlers will be able to achieve similar level of
integration without libbpf having to expose extra types and APIs.
For starters, update SEC_DEF() definitions and make them more succinct.
Also convert BPF_PROG_SEC() and BPF_APROG_COMPAT() definitions to
a common SEC_DEF() use.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-8-andrii@kernel.org
Move closer to not relying on bpf_sec_def internals that won't be part
of public API, when pluggable SEC() handlers will be allowed. Drop
pre-calculated prefix length, and in various helpers don't rely on this
prefix length availability. Also minimize reliance on knowing
bpf_sec_def's prefix for few places where section prefix shortcuts are
supported (e.g., tp vs tracepoint, raw_tp vs raw_tracepoint).
Given checking some string for having a given string-constant prefix is
such a common operation and so annoying to be done with pure C code, add
a small macro helper, str_has_pfx(), and reuse it throughout libbpf.c
where prefix comparison is performed. With __builtin_constant_p() it's
possible to have a convenient helper that checks some string for having
a given prefix, where prefix is either string literal (or compile-time
known string due to compiler optimization) or just a runtime string
pointer, which is quite convenient and saves a lot of typing and string
literal duplication.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-7-andrii@kernel.org
Refactor internals of libbpf to allow adding custom SEC() handling logic
easily from outside of libbpf. To that effect, each SEC()-handling
registration sets mandatory program type/expected attach type for
a given prefix and can provide three callbacks called at different
points of BPF program lifetime:
- init callback for right after bpf_program is initialized and
prog_type/expected_attach_type is set. This happens during
bpf_object__open() step, close to the very end of constructing
bpf_object, so all the libbpf APIs for querying and updating
bpf_program properties should be available;
- pre-load callback is called right before BPF_PROG_LOAD command is
called in the kernel. This callbacks has ability to set both
bpf_program properties, as well as program load attributes, overriding
and augmenting the standard libbpf handling of them;
- optional auto-attach callback, which makes a given SEC() handler
support auto-attachment of a BPF program through bpf_program__attach()
API and/or BPF skeletons <skel>__attach() method.
Each callbacks gets a `long cookie` parameter passed in, which is
specified during SEC() handling. This can be used by callbacks to lookup
whatever additional information is necessary.
This is not yet completely ready to be exposed to the outside world,
mainly due to non-public nature of struct bpf_prog_load_params. Instead
of making it part of public API, we'll wait until the planned low-level
libbpf API improvements for BPF_PROG_LOAD and other typical bpf()
syscall APIs, at which point we'll have a public, probably OPTS-based,
way to fully specify BPF program load parameters, which will be used as
an interface for custom pre-load callbacks.
But this change itself is already a good first step to unify the BPF
program hanling logic even within the libbpf itself. As one example, all
the extra per-program type handling (sleepable bit, attach_btf_id
resolution, unsetting optional expected attach type) is now more obvious
and is gathered in one place.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-6-andrii@kernel.org
Normalize all the other non-conforming SEC() usages across all
selftests. This is in preparation for libbpf to start to enforce
stricter SEC() rules in libbpf 1.0 mode.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-5-andrii@kernel.org
Convert all SEC("classifier*") uses to a new and strict SEC("tc")
section name. In reference_tracking selftests switch from ambiguous
searching by program title (section name) to non-ambiguous searching by
name in some selftests, getting closer to completely removing
bpf_object__find_program_by_title().
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-4-andrii@kernel.org
Convert almost all SEC("xdp_blah") uses to strict SEC("xdp") to comply
with strict libbpf 1.0 logic of exact section name match for XDP program
types. There is only one exception, which is only tested through
iproute2 and defines multiple XDP programs within the same BPF object.
Given iproute2 still works in non-strict libbpf mode and it doesn't have
means to specify XDP programs by its name (not section name/title),
leave that single file alone for now until iproute2 gains lookup by
function/program name.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-3-andrii@kernel.org
When parsing legacy map definitions, libbpf would error out when
encountering an STT_SECTION symbol. This becomes a problem because some
versions of binutils will produce SECTION symbols for every section when
processing an ELF file, so BPF files run through 'strip' will end up with
such symbols, making libbpf refuse to load them.
There's not really any reason why erroring out is strictly necessary, so
change libbpf to just ignore SECTION symbols when parsing the ELF.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210927205810.715656-1-toke@redhat.com
Add a test for the frame_headroom feature that can be set on the
umem. The logic added validates that all offsets in all tests and
packets are valid, not just the ones that have a specifically
configured frame_headroom.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-14-magnus.karlsson@gmail.com
Change the interleaving of packets in unaligned mode. With the current
buffer addresses in the packet stream, the last buffer in the umem
could not be used as a large packet could potentially write over the
end of the umem. The kernel correctly threw this buffer address away
and refused to use it. This is perfectly fine for all regular packet
streams, but the ones used for unaligned mode have every other packet
being at some different offset. As we will add checks for correct
offsets in the next patch, this needs to be fixed. Just start these
page-boundary straddling buffers one page earlier so that the last
one is not on the last page of the umem, making all buffers valid.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-13-magnus.karlsson@gmail.com
Add a test where a single packet is sent and received. This might
sound like a silly test, but since many of the interfaces in xsk are
batched, it is important to be able to validate that we did not break
something as fundamental as just receiving single packets, instead of
batches of packets at high speed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-12-magnus.karlsson@gmail.com
Introduce pacing of traffic so that the Tx thread can never send more
packets than the receiver has processed plus the number of packets it
can have in its umem. So at any point in time, the number of in flight
packets (not processed by the Rx thread) are less than or equal to the
number of packets that can be held in the Rx thread's umem.
The batch size is also increased to improve running time.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-11-magnus.karlsson@gmail.com
The socket creation retry unnecessarily registered the umem once for
every retry. No reason to do this. It wastes memory and it might lead
to too many pages being locked at some point and the failure of a
test.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-10-magnus.karlsson@gmail.com
Fix a problem where the fill ring was populated with too many
entries. If number of buffers in the umem was smaller than the fill
ring size, the code used to loop over from the beginning of the umem
and start putting the same buffers in again. This is racy indeed as a
later packet can be received overwriting an earlier one before the Rx
thread manages to validate it.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-9-magnus.karlsson@gmail.com
Fix missing initialization of the member rx_pkt_nb in the packet
stream. This leads to some tests declaring success too early as the
test thought all packets had already been received.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-8-magnus.karlsson@gmail.com
With clang build kernel (adding LLVM=1 to kernel and selftests/bpf build
command line), I hit the following test failure:
$ ./test_progs -t btf_dump
...
btf_dump_data:PASS:ensure expected/actual match 0 nsec
btf_dump_data:FAIL:find type id unexpected find type id: actual -2 < expected 0
btf_dump_data:FAIL:find type id unexpected find type id: actual -2 < expected 0
test_btf_dump_int_data:FAIL:dump __int128 unexpected error: -2 (errno 2)
#15/9 btf_dump/btf_dump: int_data:FAIL
Further analysis showed gcc build kernel has type "__int128" in dwarf/BTF
and it doesn't exist in clang build kernel. Code searching for kernel code
found the following:
arch/s390/include/asm/types.h: unsigned __int128 pair;
crypto/ecc.c: unsigned __int128 m = (unsigned __int128)left * right;
include/linux/math64.h: return (u64)(((unsigned __int128)a * mul) >> shift);
include/linux/math64.h: return (u64)(((unsigned __int128)a * mul) >> shift);
lib/ubsan.h:typedef __int128 s_max;
lib/ubsan.h:typedef unsigned __int128 u_max;
In my case, CONFIG_UBSAN is not enabled. Even if we only have "unsigned __int128"
in the code, somehow gcc still put "__int128" in dwarf while clang didn't.
Hence current test works fine for gcc but not for clang.
Enabling CONFIG_UBSAN is an option to provide __int128 type into dwarf
reliably for both gcc and clang, but not everybody enables CONFIG_UBSAN
in their kernel build. So the best choice is to use "unsigned __int128" type
which is available in both clang and gcc build kernels. But clang and gcc
dwarf encoded names for "unsigned __int128" are different:
[$ ~] cat t.c
unsigned __int128 a;
[$ ~] gcc -g -c t.c && llvm-dwarfdump t.o | grep __int128
DW_AT_type (0x00000031 "__int128 unsigned")
DW_AT_name ("__int128 unsigned")
[$ ~] clang -g -c t.c && llvm-dwarfdump t.o | grep __int128
DW_AT_type (0x00000033 "unsigned __int128")
DW_AT_name ("unsigned __int128")
The test change in this patch tries to test type name before
doing actual test.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20210924025856.2192476-1-yhs@fb.com
Similarly to recently added legacy kprobe attach interface support
through tracefs, support attaching uprobes using the legacy interface if
host kernel doesn't support newer FD-based interface.
For uprobes event name consists of "libbpf_" prefix, PID, sanitized
binary path and offset within that binary. Structuraly the code is
aligned with kprobe logic refactoring in previous patch. struct
bpf_link_perf is re-used and all the same legacy_probe_name and
legacy_is_retprobe fields are used to ensure proper cleanup on
bpf_link__destroy().
Users should be aware, though, that on old kernels which don't support
FD-based interface for kprobe/uprobe attachment, if the application
crashes before bpf_link__destroy() is called, uprobe legacy
events will be left in tracefs. This is the same limitation as with
legacy kprobe interfaces.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210921210036.1545557-5-andrii@kernel.org
Refactor legacy kprobe handling code to follow the same logic as uprobe
legacy logic added in the next patchs:
- add append_to_file() helper that makes it simpler to work with
tracefs file-based interface for creating and deleting probes;
- move out probe/event name generation outside of the code that
adds/removes it, which simplifies bookkeeping significantly;
- change the probe name format to start with "libbpf_" prefix and
include offset within kernel function;
- switch 'unsigned long' to 'size_t' for specifying kprobe offsets,
which is consistent with how uprobes define that, simplifies
printf()-ing internally, and also avoids unnecessary complications on
architectures where sizeof(long) != sizeof(void *).
This patch also implicitly fixes the problem with invalid open() error
handling present in poke_kprobe_events(), which (the function) this
patch removes.
Fixes: ca304b40c2 ("libbpf: Introduce legacy kprobe events support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210921210036.1545557-4-andrii@kernel.org
Make sure to not use ref_ctr_off feature when running on old kernels
that don't support this feature. This allows to test libbpf's legacy
kprobe and uprobe logic on old kernels.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210921210036.1545557-3-andrii@kernel.org
This adds comments above functions in libbpf.h which document
their uses. These comments are of a format that doxygen and sphinx
can pick up and render. These are rendered by libbpf.readthedocs.org
These doc comments are for:
- bpf_object__find_map_by_name()
- bpf_map__fd()
- bpf_map__is_internal()
- libbpf_get_error()
- libbpf_num_possible_cpus()
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210918031457.36204-1-grantseltzer@gmail.com
Since the data_len in these two functions is a byte len of the preceding
u64 *data array, it must always be a multiple of 8. If this isn't the
case both helpers error out, so let's make the requirement explicit so
users don't need to infer it.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210917182911.2426606-10-davemarchevsky@fb.com
This commit adds a test prog for vprintk which confirms that:
* bpf_trace_vprintk is writing to /sys/kernel/debug/tracing/trace_pipe
* __bpf_vprintk macro works as expected
* >3 args are printed
* bpf_printk w/ 0 format args compiles
* bpf_trace_vprintk call w/ a fmt specifier but NULL fmt data fails
Approach and code are borrowed from trace_printk test.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210917182911.2426606-9-davemarchevsky@fb.com
Guidance for new tests is to use ASSERT macros instead of CHECK. Since
trace_vprintk test will borrow heavily from trace_printk's, migrate its
CHECKs so it remains obvious that the two are closely related.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210917182911.2426606-8-davemarchevsky@fb.com
Since commit 368cb0e7cd ("bpftool: Make probes which emit dmesg
warnings optional"), some helpers aren't probed by bpftool unless
`full` arg is added to `bpftool feature probe`.
bpf_trace_vprintk can emit dmesg warnings when probed, so include it.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210917182911.2426606-7-davemarchevsky@fb.com
The __bpf_printk convenience macro was using a 'char' fmt string holder
as it predates support for globals in libbpf. Move to more efficient
'static const char', but provide a fallback to the old way via
BPF_NO_GLOBAL_DATA so users on old kernels can still use the macro.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210917182911.2426606-6-davemarchevsky@fb.com
Instead of being a thin wrapper which calls into bpf_trace_printk,
libbpf's bpf_printk convenience macro now chooses between
bpf_trace_printk and bpf_trace_vprintk. If the arg count (excluding
format string) is >3, use bpf_trace_vprintk, otherwise use the older
helper.
The motivation behind this added complexity - instead of migrating
entirely to bpf_trace_vprintk - is to maintain good developer experience
for users compiling against new libbpf but running on older kernels.
Users who are passing <=3 args to bpf_printk will see no change in their
bytecode.
__bpf_vprintk functions similarly to BPF_SEQ_PRINTF and BPF_SNPRINTF
macros elsewhere in the file - it allows use of bpf_trace_vprintk
without manual conversion of varargs to u64 array. Previous
implementation of bpf_printk macro is moved to __bpf_printk for use by
the new implementation.
This does change behavior of bpf_printk calls with >3 args in the "new
libbpf, old kernels" scenario. Before this patch, attempting to use 4
args to bpf_printk results in a compile-time error. After this patch,
using bpf_printk with 4 args results in a trace_vprintk helper call
being emitted and a load-time failure on older kernels.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210917182911.2426606-5-davemarchevsky@fb.com
This helper is meant to be "bpf_trace_printk, but with proper vararg
support". Follow bpf_snprintf's example and take a u64 pseudo-vararg
array. Write to /sys/kernel/debug/tracing/trace_pipe using the same
mechanism as bpf_trace_printk. The functionality of this helper was
requested in the libbpf issue tracker [0].
[0] Closes: https://github.com/libbpf/libbpf/issues/315
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210917182911.2426606-4-davemarchevsky@fb.com
bpf_program__load is not supposed to be used directly. Replace it with
bpf_object__ APIs for the reference_tracking prog_test, which is the
last offender in bpf selftests.
Some additional complexity is added for this test, namely the use of one
bpf_object to iterate through progs, while a second bpf_object is
created and opened/closed to test actual loading of progs. This is
because the test was doing bpf_program__load then __unload to test
loading of individual progs and same semantics with
bpf_object__load/__unload result in failure to load an __unload-ed obj.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210917182911.2426606-3-davemarchevsky@fb.com
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-09-17
We've added 63 non-merge commits during the last 12 day(s) which contain
a total of 65 files changed, 2653 insertions(+), 751 deletions(-).
The main changes are:
1) Streamline internal BPF program sections handling and
bpf_program__set_attach_target() in libbpf, from Andrii.
2) Add support for new btf kind BTF_KIND_TAG, from Yonghong.
3) Introduce bpf_get_branch_snapshot() to capture LBR, from Song.
4) IMUL optimization for x86-64 JIT, from Jie.
5) xsk selftest improvements, from Magnus.
6) Introduce legacy kprobe events support in libbpf, from Rafael.
7) Access hw timestamp through BPF's __sk_buff, from Vadim.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (63 commits)
selftests/bpf: Fix a few compiler warnings
libbpf: Constify all high-level program attach APIs
libbpf: Schedule open_opts.attach_prog_fd deprecation since v0.7
selftests/bpf: Switch fexit_bpf2bpf selftest to set_attach_target() API
libbpf: Allow skipping attach_func_name in bpf_program__set_attach_target()
libbpf: Deprecated bpf_object_open_opts.relaxed_core_relocs
selftests/bpf: Stop using relaxed_core_relocs which has no effect
libbpf: Use pre-setup sec_def in libbpf_find_attach_btf_id()
bpf: Update bpf_get_smp_processor_id() documentation
libbpf: Add sphinx code documentation comments
selftests/bpf: Skip btf_tag test if btf_tag attribute not supported
docs/bpf: Add documentation for BTF_KIND_TAG
selftests/bpf: Add a test with a bpf program with btf_tag attributes
selftests/bpf: Test BTF_KIND_TAG for deduplication
selftests/bpf: Add BTF_KIND_TAG unit tests
selftests/bpf: Change NAME_NTH/IS_NAME_NTH for BTF_KIND_TAG format
selftests/bpf: Test libbpf API function btf__add_tag()
bpftool: Add support for BTF_KIND_TAG
libbpf: Add support for BTF_KIND_TAG
libbpf: Rename btf_{hash,equal}_int to btf_{hash,equal}_int_tag
...
====================
Link: https://lore.kernel.org/r/20210917173738.3397064-1-ast@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With clang building selftests/bpf, I hit a few warnings like below:
.../bpf_iter.c:592:48: warning: variable 'expected_key_c' set but not used [-Wunused-but-set-variable]
__u32 expected_key_a = 0, expected_key_b = 0, expected_key_c = 0;
^
.../bpf_iter.c:688:48: warning: variable 'expected_key_c' set but not used [-Wunused-but-set-variable]
__u32 expected_key_a = 0, expected_key_b = 0, expected_key_c = 0;
^
.../tc_redirect.c:657:6: warning: variable 'target_fd' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (!ASSERT_OK_PTR(nstoken, "setns " NS_FWD))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../tc_redirect.c:743:6: note: uninitialized use occurs here
if (target_fd >= 0)
^~~~~~~~~
Removing unused variables and initializing the previously-uninitialized variable
to ensure these warnings are gone.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210917043343.3711917-1-yhs@fb.com
Attach APIs shouldn't need to modify bpf_program/bpf_map structs, so
change all struct bpf_program and struct bpf_map pointers to const
pointers. This is completely backwards compatible with no functional
change.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-8-andrii@kernel.org
bpf_object_open_opts.attach_prog_fd makes a pretty strong assumption
that bpf_object contains either only single freplace BPF program or all
of BPF programs in BPF object are freplaces intended to replace
different subprograms of the same target BPF program. This seems both
a bit confusing, too assuming, and limiting.
We've had bpf_program__set_attach_target() API which allows more
fine-grained control over this, on a per-program level. As such, mark
open_opts.attach_prog_fd as deprecated starting from v0.7, so that we
have one more universal way of setting freplace targets. With previous
change to allow NULL attach_func_name argument, and especially combined
with BPF skeleton, arguable bpf_program__set_attach_target() is a more
convenient and explicit API as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-7-andrii@kernel.org
Switch fexit_bpf2bpf selftest to bpf_program__set_attach_target()
instead of using bpf_object_open_opts.attach_prog_fd, which is going to
be deprecated. These changes also demonstrate the new mode of
set_attach_target() in which it allows NULL when the target is BPF
program (attach_prog_fd != 0).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-6-andrii@kernel.org
Allow to use bpf_program__set_attach_target to only set target attach
program FD, while letting libbpf to use target attach function name from
SEC() definition. This might be useful for some scenarios where
bpf_object contains multiple related freplace BPF programs intended to
replace different sub-programs in target BPF program. In such case all
programs will have the same attach_prog_fd, but different
attach_func_name. It's convenient to specify such target function names
declaratively in SEC() definitions, but attach_prog_fd is a dynamic
runtime setting.
To simplify such scenario, allow bpf_program__set_attach_target() to
delay BTF ID resolution till the BPF program load time by providing NULL
attach_func_name. In that case the behavior will be similar to using
bpf_object_open_opts.attach_prog_fd (which is marked deprecated since
v0.7), but has the benefit of allowing more control by user in what is
attached to what. Such setup allows having BPF programs attached to
different target attach_prog_fd with target functions still declaratively
recorded in BPF source code in SEC() definitions.
Selftests changes in the next patch should make this more obvious.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-5-andrii@kernel.org
It's relevant and hasn't been doing anything for a long while now.
Deprecated it.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-4-andrii@kernel.org
relaxed_core_relocs option hasn't had any effect for a while now, stop
specifying it. Next patch marks it as deprecated.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-3-andrii@kernel.org
Don't perform another search for sec_def inside
libbpf_find_attach_btf_id(), as each recognized bpf_program already has
prog->sec_def set.
Also remove unnecessary NULL check for prog->sec_name, as it can never
be NULL.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-2-andrii@kernel.org
Should not use comparison of unsigned expressions < 0.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
