commit da3b1c294d upstream.
The required list used "fiq-index" instead of "apple,fiq-index"
described as property and used in the dts. Add the missing "apple,"
prefix.
Fixes: dba07ad113 ("dt-bindings: apple,aic: Add affinity description for per-cpu pseudo-interrupts")
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220909135103.98179-2-j@jannau.net
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 767470209c ]
BMG160 has two interrupt pins to which interrupts can be freely mapped.
Correct the schema to express such case and fix warnings like:
qcom/msm8916-alcatel-idol347.dtb: gyroscope@68: interrupts: [[97, 1], [98, 1]] is too long
However the basic issue still persists - the interrupts should come in a
defined order.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220805075503.16983-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e89d120c4b ]
The AMU counter AMEVCNTR01 (constant counter) should increment at the same
rate as the system counter. On affected Cortex-A510 cores, AMEVCNTR01
increments incorrectly giving a significantly higher output value. This
results in inaccurate task scheduler utilization tracking and incorrect
feedback on CPU frequency.
Work around this problem by returning 0 when reading the affected counter
in key locations that results in disabling all users of this counter from
using it either for frequency invariance or as FFH reference counter. This
effect is the same to firmware disabling affected counters.
Details on how the two features are affected by this erratum:
- AMU counters will not be used for frequency invariance for affected
CPUs and CPUs in the same cpufreq policy. AMUs can still be used for
frequency invariance for unaffected CPUs in the system. Although
unlikely, if no alternative method can be found to support frequency
invariance for affected CPUs (cpufreq based or solution based on
platform counters) frequency invariance will be disabled. Please check
the chapter on frequency invariance at
Documentation/scheduler/sched-capacity.rst for details of its effect.
- Given that FFH can be used to fetch either the core or constant counter
values, restrictions are lifted regarding any of these counters
returning a valid (!0) value. Therefore FFH is considered supported
if there is a least one CPU that support AMUs, independent of any
counters being disabled or affected by this erratum. Clarifying
comments are now added to the cpc_ffh_supported(), cpu_read_constcnt()
and cpu_read_corecnt() functions.
The above is achieved through adding a new erratum: ARM64_ERRATUM_2457168.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220819103050.24211-1-ionela.voinescu@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 39fdb65f52 upstream.
Cortex-A510 is affected by an erratum where in rare circumstances the
CPUs may not handle a race between a break-before-make sequence on one
CPU, and another CPU accessing the same page. This could allow a store
to a page that has been unmapped.
Work around this by adding the affected CPUs to the list that needs
TLB sequences to be done twice.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220704155732.21216-1-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Cc: Lucas Wei <lucaswei@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cee7db1b02 upstream.
On distros whose texlive packaging is fine-grained, texlive-xecjk
can be installed/removed independently of other texlive packages.
Conditionally loading xeCJK depending only on the existence of the
"Noto Sans CJK SC" font might end up in xelatex error of
"xeCJK.sty not found!".
Improve the situation by testing existence of xeCJK.sty before
loading it.
This is useful on RHEL 9 and its clone distros where texlive-xecjk
doesn't work at the moment due to a missing dependency [1].
"make pdfdocs" for non-CJK contents should work after removing
texlive-xecjk.
Link: [1] https://bugzilla.redhat.com/show_bug.cgi?id=2086254
Fixes: 398f7abdcb ("docs: pdfdocs: Pull LaTeX preamble part out of conf.py")
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/c24c2a87-70b2-5342-bcc9-de467940466e@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e8cff0a0e upstream.
On arm64, "rodata=full" has been suppored (but not documented) since
commit:
c55191e96c ("arm64: mm: apply r/o permissions of VM areas to its linear alias as well")
As it's necessary to determine the rodata configuration early during
boot, arm64 has an early_param() handler for this, whereas init/main.c
has a __setup() handler which is run later.
Unfortunately, this split meant that since commit:
f9a40b0890 ("init/main.c: return 1 from handled __setup() functions")
... passing "rodata=full" would result in a spurious warning from the
__setup() handler (though RO permissions would be configured
appropriately).
Further, "rodata=full" has been broken since commit:
0d6ea3ac94 ("lib/kstrtox.c: add "false"/"true" support to kstrtobool()")
... which caused strtobool() to parse "full" as false (in addition to
many other values not documented for the "rodata=" kernel parameter.
This patch fixes this breakage by:
* Moving the core parameter parser to an __early_param(), such that it
is available early.
* Adding an (optional) arch hook which arm64 can use to parse "full".
* Updating the documentation to mention that "full" is valid for arm64.
* Having the core parameter parser handle "on" and "off" explicitly,
such that any undocumented values (e.g. typos such as "ful") are
reported as errors rather than being silently accepted.
Note that __setup() and early_param() have opposite conventions for
their return values, where __setup() uses 1 to indicate a parameter was
handled and early_param() uses 0 to indicate a parameter was handled.
Fixes: f9a40b0890 ("init/main.c: return 1 from handled __setup() functions")
Fixes: 0d6ea3ac94 ("lib/kstrtox.c: add "false"/"true" support to kstrtobool()")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jagdish Gediya <jvgediya@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220817154022.3974645-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00da0cb385 upstream.
While reporting for the AMD retbleed vulnerability was added in
6b80b59b35 ("x86/bugs: Report AMD retbleed vulnerability")
the new sysfs file was not mentioned so far in the ABI documentation for
sysfs-devices-system-cpu. Fix that.
Fixes: 6b80b59b35 ("x86/bugs: Report AMD retbleed vulnerability")
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220801091529.325327-1-carnil@debian.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7df548840c upstream.
Older Intel CPUs that are not in the affected processor list for MMIO
Stale Data vulnerabilities currently report "Not affected" in sysfs,
which may not be correct. Vulnerability status for these older CPUs is
unknown.
Add known-not-affected CPUs to the whitelist. Report "unknown"
mitigation status for CPUs that are not in blacklist, whitelist and also
don't enumerate MSR ARCH_CAPABILITIES bits that reflect hardware
immunity to MMIO Stale Data vulnerabilities.
Mitigation is not deployed when the status is unknown.
[ bp: Massage, fixup. ]
Fixes: 8d50cdf8b8 ("x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data")
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/a932c154772f2121794a5f2eded1a11013114711.1657846269.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5dcd08cd19 ]
While reading netdev_max_backlog, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
While at it, we remove the unnecessary spaces in the doc.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 118b136693 ]
During an LPM, while the memory transfer is in progress on the arrival
side, some latencies are generated when accessing not yet transferred
pages on the arrival side. Thus, the NMI watchdog may be triggered too
frequently, which increases the risk to hit an NMI interrupt in a bad
place in the kernel, leading to a kernel panic.
Disabling the Hard Lockup Watchdog until the memory transfer could be a
too strong work around, some users would want this timeout to be
eventually triggered if the system is hanging even during an LPM.
Introduce a new sysctl variable nmi_watchdog_factor. It allows to apply
a factor to the NMI watchdog timeout during an LPM. Just before the CPUs
are stopped for the switchover sequence, the NMI watchdog timer is set
to watchdog_thresh + factor%
A value of 0 has no effect. The default value is 200, meaning that the
NMI watchdog is set to 30s during LPM (based on a 10s watchdog_thresh
value). Once the memory transfer is achieved, the factor is reset to 0.
Setting this value to a high number is like disabling the NMI watchdog
during an LPM.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713154729.80789-5-ldufour@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2a29f80e15 upstream.
When adding the D1 TCON bindings, I missed the conditional blocks that
restrict the binding for TCON LCD vs TCON TV hardware. Add the D1 TCON
variants to the appropriate blocks for DE2 TCON LCDs and TCON TVs.
Fixes: ae5a5d26c1 ("dt-bindings: display: Add D1 display engine compatibles")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220812073702.57618-1-samuel@sholland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0de7fa706 upstream.
The device bindings shouldn't put any constraints on the regulator-name
property specified in the generic bindings. This allows using arbitrary
and descriptive names for the regulators.
Suggested-by: Mark Brown <broonie@kernel.org>
Fixes: 7ae9e3a6bf ("dt-bindings: regulator: add pca9450 regulator yaml")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20220802064335.8481-1-frieder@fris.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee912312db upstream.
Recent Qualcomm Geni SPI nodes, e.g. on SM8450, come also with three
interconnects. This fixes dtbs_check warnings like:
sm8450-qrd.dtb: spi@a98000: interconnects: [[46, 1, 0, 46, 4, 0], [47, 2, 0, 48, 12, 0], [49, 1, 0, 50, 1, 0]] is too long
sm8450-qrd.dtb: spi@a98000: interconnect-names: ['qup-core', 'qup-config', 'qup-memory'] is too long
Fixes: 5bdcae1fe1 ("spi: dt-bindings: qcom,spi-geni-qcom: convert to dtschema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220720163841.7283-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b4916a6e4 upstream.
Adding missing compat entries to the cpufreq node
Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml shows up
a dt_binding_check in this file.
opp-v2-kryo-cpu.example.dtb: /: cpus:cpu@0: 'power-domains' is a required property
opp-v2-kryo-cpu.example.dtb: /: cpus:cpu@0: 'power-domain-names' is a required property
opp-v2-kryo-cpu.example.dtb: /: opp-table-0:opp-307200000: 'required-opps' is a required property
Fixes: ec24d1d554 ("dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit acfc34f008 upstream.
During the conversion the bindings lost list of required properties.
Fixes: c58db2abb1 ("spi: convert Xilinx Zynq UltraScale+ MPSoC GQSPI bindings to YAML")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20220704130618.199231-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6eee27c598 upstream.
During the conversion the bindings lost list of required properties.
Fixes: aa7968682a ("spi: convert Cadence SPI bindings to YAML")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20220704130618.199231-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 839fbdee4c upstream.
Fix the reset conditional which always evaluated to true due to a
misspelled property name ("compatibles" in plural).
Fixes: 6700a9b00f ("dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms")
Link: https://lore.kernel.org/r/20220629141000.18111-2-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c704bd373f upstream.
The compatibles for APQ8094/MSM8994 boards are different than specified
in bindings. None of them use fallback to other SoC variant.
Fixes: 9ad3c08f6f ("dt-bindings: arm: qcom: Document sony boards for apq8094")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220520123252.365762-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb35fe1efb upstream.
The order of compatibles for MSM8916 MTP board is different:
msm8916-mtp.dtb: /: compatible: 'oneOf' conditional failed, one must be fixed:
['qcom,msm8916-mtp', 'qcom,msm8916-mtp/1', 'qcom,msm8916'] is too long
Fixes: 9d3ef77fe5 ("dt-bindings: arm: Convert QCom board/soc bindings to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220520123252.365762-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25d203d075 upstream.
The MSM8916 Longcheer L8150 uses a fallback in compatible:
msm8916-longcheer-l8150.dtb: /: compatible: 'oneOf' conditional failed, one must be fixed:
['longcheer,l8150', 'qcom,msm8916-v1-qrd/9-v1', 'qcom,msm8916'] is too long
Fixes: b72160fa88 ("dt-bindings: qcom: Document bindings for new MSM8916 devices")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20220520123252.365762-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7668048e5c upstream.
"xlnx,zynqmp-gpio-1.0", "xlnx,versal-gpio-1.0" and "xlnx,pmc-gpio-1.0"
compatible strings were not moved to yaml format. But they were in origin
text file.
Fixes: 45ca16072b ("dt-bindings: gpio: zynq: convert bindings to YAML")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/72c973da5670b5ae81d050c582948894ee4174f8.1634206453.git.michal.simek@xilinx.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0ea452715 upstream.
Although the IQS7222C does not offer slider gesture support, the
press/release event can still be mapped to any of the IQS7222C's
three GPIO pins. Update the binding to reflect this relationship.
Fixes: 44dc42d254 ("dt-bindings: input: Add bindings for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-10-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5d2c1ed72 upstream.
The vendor has marked the RF filter enable control as reserved in
the datasheet; remove it from the binding.
Fixes: 44dc42d254 ("dt-bindings: input: Add bindings for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-8-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4526ae80d upstream.
Commit e5fabbe43f ("pinctrl: mediatek: paris: Support generic
PIN_CONFIG_DRIVE_STRENGTH_UA") added support for using
drive-strength-microamp instead of mediatek,drive-strength-adv.
Similarly to the mt8192 and mt8195, there's no user of property
'mediatek,drive-strength-adv', hence removing it is safe.
Fixes: 338e953f1b ("dt-bindings: pinctrl: mt8186: add pinctrl file and binding document")
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220725110702.11362-3-allen-kh.cheng@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b3ab63e56 upstream.
As was already done for MT8192 in commit b52e695324 ("dt-bindings:
pinctrl: mt8192: Add drive-strength-microamp"), replace the custom
mediatek,drive-strength-adv property with the standardized pinconf
'drive-strength-microamp' one.
Similarly to the mt8192 counterpart, there's no user of property
'mediatek,drive-strength-adv', hence removing it is safe.
Fixes: 69c3d58dc1 ("dt-bindings: pinctrl: mt8195: Add mediatek,drive-strength-adv property")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220630131543.225554-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11bd0ffd16 upstream.
When this property was introduced, it contained underscores, but
the actual code wants dashes.
Change it from mediatek,rsel_resistance_in_si_unit to
mediatek,rsel-resistance-in-si-unit.
Fixes: 91e7edceda ("dt-bindings: pinctrl: mt8195: change pull up/down description")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220630122334.216903-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 353d2ef77f upstream.
Commit cafe19db77 ("pinctrl: mediatek: Backward compatible to previous
Mediatek's bias-pull usage") allowed the bias-pull-up and bias-pull-down
properties to be used for setting PUPD/R1/R0 type bias on mtk-paris
based SoC's, which was previously only supported by the custom
mediatek,pull-up-adv and mediatek,pull-down-adv properties.
Since the bias-pull-{up,down} properties already have defines associated
thus being more descriptive and is more universal on MediaTek platforms,
and given that there are no mediatek,pull-{up,down}-adv users on mt8192
yet, remove the custom adv properties in favor of the generic ones.
Note that only mediatek,pull-up-adv was merged in the binding, but not
its down counterpart.
Fixes: edbacb36ea ("dt-bindings: pinctrl: mt8192: Add mediatek,pull-up-adv property")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogiocchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220525155714.1837360-3-nfraprado@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b52e695324 upstream.
Commit e5fabbe43f ("pinctrl: mediatek: paris: Support generic
PIN_CONFIG_DRIVE_STRENGTH_UA") added support for using
drive-strength-microamp instead of mediatek,drive-strength-adv.
Since there aren't any users of mediatek,drive-strength-adv on mt8192
yet, remove this property and add drive-strength-microamp in its place,
which has a clearer meaning.
Fixes: 4ac68333ff ("dt-bindings: pinctrl: mt8192: Add mediatek,drive-strength-adv property")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogiocchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220525155714.1837360-2-nfraprado@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 944de5182f upstream.
The MSM8916 Alcatel OneTouch Idol 3 does not use MTP fallbacks in
compatibles:
msm8916-alcatel-idol347.dtb: /: compatible: 'oneOf' conditional failed, one must be fixed:
['alcatel,idol347', 'qcom,msm8916'] is too short
Reported-by: Rob Herring <robh@kernel.org>
Fixes: e9dd2f7204 ("dt-bindings: arm: qcom: Document alcatel,idol347 board")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20220520123252.365762-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9066e151c3 upstream.
Since commit 488dac0c92 ("libfs: fix error cast of negative value in
simple_attr_write()"), the EINJ debugfs interface no longer accepts
negative values as input. Attempt to do so will result in EINVAL.
Fixes: 488dac0c92 ("libfs: fix error cast of negative value in simple_attr_write()")
Signed-off-by: Qifu Zhang <zhangqifu@bytedance.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b2c510ffe2 upstream.
Add missing "minItems: 1" to the interrupt-names property to allow the
second interrupt-names, "wakeup", to be optional.
Fixes: fe8e488058 ("dt-bindings: usb: mtk-xhci: add wakeup interrupt")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220623193702.817996-2-nfraprado@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 415d832497 upstream.
These operations are documented as always ordered in
include/asm-generic/bitops/instrumented-atomic.h, and producer-consumer
type use cases where one side needs to ensure a flag is left pending
after some shared data was updated rely on this ordering, even in the
failure case.
This is the case with the workqueue code, which currently suffers from a
reproducible ordering violation on Apple M1 platforms (which are
notoriously out-of-order) that ends up causing the TTY layer to fail to
deliver data to userspace properly under the right conditions. This
change fixes that bug.
Change the documentation to restrict the "no order on failure" story to
the _lock() variant (for which it makes sense), and remove the
early-exit from the generic implementation, which is what causes the
missing barrier semantics in that case. Without this, the remaining
atomic op is fully ordered (including on ARM64 LSE, as of recent
versions of the architecture spec).
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: e986a0d6cb ("locking/atomics, asm-generic/bitops/atomic.h: Rewrite using atomic_*() APIs")
Fixes: 61e02392d3 ("locking/atomic/bitops: Document and clarify ordering semantics for failed test_and_{}_bit()")
Signed-off-by: Hector Martin <marcan@marcan.st>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 402c43ea6b upstream.
In some use cases[1], the backend is created while the frontend doesn't
support the persistent grants feature, but later the frontend can be
changed to support the feature and reconnect. In the past, 'blkback'
enabled the persistent grants feature since it unconditionally checked
if frontend supports the persistent grants feature for every connect
('connect_ring()') and decided whether it should use persistent grans or
not.
However, commit aac8a70db2 ("xen-blkback: add a parameter for
disabling of persistent grants") has mistakenly changed the behavior.
It made the frontend feature support check to not be repeated once it
shown the 'feature_persistent' as 'false', or the frontend doesn't
support persistent grants.
Similar behavioral change has made on 'blkfront' by commit 74a852479c
("xen-blkfront: add a parameter for disabling of persistent grants").
This commit changes the behavior of the parameter to make effect for
every connect, so that the previous behavior of 'blkfront' can be
restored.
[1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/
Fixes: 74a852479c ("xen-blkfront: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-4-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e94c6101e1 upstream.
In some use cases[1], the backend is created while the frontend doesn't
support the persistent grants feature, but later the frontend can be
changed to support the feature and reconnect. In the past, 'blkback'
enabled the persistent grants feature since it unconditionally checked
if frontend supports the persistent grants feature for every connect
('connect_ring()') and decided whether it should use persistent grans or
not.
However, commit aac8a70db2 ("xen-blkback: add a parameter for
disabling of persistent grants") has mistakenly changed the behavior.
It made the frontend feature support check to not be repeated once it
shown the 'feature_persistent' as 'false', or the frontend doesn't
support persistent grants.
This commit changes the behavior of the parameter to make effect for
every connect, so that the previous workflow can work again as expected.
[1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/
Reported-by: Andrii Chepurnyi <andrii.chepurnyi82@gmail.com>
Fixes: aac8a70db2 ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-3-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6cfcdda8c upstream.
AMD's "Technical Guidance for Mitigating Branch Type Confusion,
Rev. 1.0 2022-07-12" whitepaper, under section 6.1.2 "IBPB On
Privileged Mode Entry / SMT Safety" says:
Similar to the Jmp2Ret mitigation, if the code on the sibling thread
cannot be trusted, software should set STIBP to 1 or disable SMT to
ensure SMT safety when using this mitigation.
So, like already being done for retbleed=unret, and now also for
retbleed=ibpb, force STIBP on machines that have it, and report its SMT
vulnerability status accordingly.
[ bp: Remove the "we" and remove "[AMD]" applicability parameter which
doesn't work here. ]
Fixes: 3ebc170068 ("x86/bugs: Add retbleed=ibpb")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org # 5.10, 5.15, 5.19
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Link: https://lore.kernel.org/r/20220804192201.439596-1-kim.phillips@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8574adf522 ]
Rob pointed some remaining issues in the sdhci-msm yaml
bindings (via [1]).
Fix the same by first using the 'mmc-controller.yaml' as
'ref' and thereafter also fix the issues reported by
'make dtbs_check' check.
[1]. https://lore.kernel.org/linux-arm-msm/YnLmNCwNfoqZln12@robh.at.kernel.org/
Fixes: a45537723f ("dt-bindings: mmc: sdhci-msm: Convert bindings to yaml")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20220514220116.1008254-1-bhupesh.sharma@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4a179c716 ]
The HEVC specification describes the following:
"PicOrderCntVal is derived as follows:
PicOrderCntVal = PicOrderCntMsb + slice_pic_order_cnt_lsb
The value of PicOrderCntVal shall be in the range of
−2^31 to 2^31 − 1, inclusive."
To match with these definitions change __u16 pic_order_cnt[2]
into __s32 pic_order_cnt_val.
Change v4l2_ctrl_hevc_slice_params->slice_pic_order_cnt to __s32 too.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ee73ef60d ]
Change dm-writecache, so that it counts the number of blocks discarded
instead of the number of discard bios. Make it consistent with the
read and write statistics counters that were changed to count the
number of blocks instead of bios.
Fixes: e3a35d0340 ("dm writecache: add event counters")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2676e1482 ]
Change dm-writecache, so that it counts the number of blocks written
instead of the number of write bios. Bios can be split and requeued
using the dm_accept_partial_bio function, so counting bios caused
inaccurate results.
Fixes: e3a35d0340 ("dm writecache: add event counters")
Reported-by: Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c6e755b49 ]
Change dm-writecache, so that it counts the number of blocks read
instead of the number of read bios. Bios can be split and requeued
using the dm_accept_partial_bio function, so counting bios caused
inaccurate results.
Fixes: e3a35d0340 ("dm writecache: add event counters")
Reported-by: Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44b3834b2e ]
Cortex-A57 and Cortex-A72 have an erratum where an interrupt that
occurs between a pair of AES instructions in aarch32 mode may corrupt
the ELR. The task will subsequently produce the wrong AES result.
The AES instructions are part of the cryptographic extensions, which are
optional. User-space software will detect the support for these
instructions from the hwcaps. If the platform doesn't support these
instructions a software implementation should be used.
Remove the hwcap bits on affected parts to indicate user-space should
not use the AES instructions.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220714161523.279570-3-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>