The posix acl permission checking helpers determine whether a caller is
privileged over an inode according to the acls associated with the
inode. Add helpers that make it possible to handle acls on idmapped
mounts.
The vfs and the filesystems targeted by this first iteration make use of
posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to
translate basic posix access and default permissions such as the
ACL_USER and ACL_GROUP type according to the initial user namespace (or
the superblock's user namespace) to and from the caller's current user
namespace. Adapt these two helpers to handle idmapped mounts whereby we
either map from or into the mount's user namespace depending on in which
direction we're translating.
Similarly, cap_convert_nscap() is used by the vfs to translate user
namespace and non-user namespace aware filesystem capabilities from the
superblock's user namespace to the caller's user namespace. Enable it to
handle idmapped mounts by accounting for the mount's user namespace.
In addition the fileystems targeted in the first iteration of this patch
series make use of the posix_acl_chmod() and, posix_acl_update_mode()
helpers. Both helpers perform permission checks on the target inode. Let
them handle idmapped mounts. These two helpers are called when posix
acls are set by the respective filesystems to handle this case we extend
the ->set() method to take an additional user namespace argument to pass
the mount's user namespace down.
Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The inode_owner_or_capable() helper determines whether the caller is the
owner of the inode or is capable with respect to that inode. Allow it to
handle idmapped mounts. If the inode is accessed through an idmapped
mount it according to the mount's user namespace. Afterwards the checks
are identical to non-idmapped mounts. If the initial user namespace is
passed nothing changes so non-idmapped mounts will see identical
behavior as before.
Similarly, allow the inode_init_owner() helper to handle idmapped
mounts. It initializes a new inode on idmapped mounts by mapping the
fsuid and fsgid of the caller from the mount's user namespace. If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-7-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The two helpers inode_permission() and generic_permission() are used by
the vfs to perform basic permission checking by verifying that the
caller is privileged over an inode. In order to handle idmapped mounts
we extend the two helpers with an additional user namespace argument.
On idmapped mounts the two helpers will make sure to map the inode
according to the mount's user namespace and then peform identical
permission checks to inode_permission() and generic_permission(). If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-6-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
In order to determine whether a caller holds privilege over a given
inode the capability framework exposes the two helpers
privileged_wrt_inode_uidgid() and capable_wrt_inode_uidgid(). The former
verifies that the inode has a mapping in the caller's user namespace and
the latter additionally verifies that the caller has the requested
capability in their current user namespace.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped inodes. If the initial user namespace is passed all
operations are a nop so non-idmapped mounts will not see a change in
behavior.
Link: https://lore.kernel.org/r/20210121131959.646623-5-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Enable unprivileged user namespace mounts of overlayfs. Overlayfs's
permission model (*) ensures that the mounter itself cannot gain additional
privileges by the act of creating an overlayfs mount.
This feature request is coming from the "rootless" container crowd.
(*) Documentation/filesystems/overlayfs.txt#Permission model
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When looking up an inode on the lower layer for which the mounter lacks
read permisison the metacopy check will fail. This causes the lookup to
fail as well, even though the directory is readable.
So ignore EACCES for the "userxattr" case and assume no metacopy for the
unreadable file.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In case the file cannot be opened with O_NOATIME because of lack of
capabilities, then clear O_NOATIME instead of failing.
Remove WARN_ON(), since it would now trigger if O_NOATIME was cleared.
Noticed by Amir Goldstein.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Comment above call already says this, but only EOPNOTSUPP is ignored, other
failures are not.
For example setting "user.*" will fail with EPERM on symlink/special.
Ignore this error as well.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Optionally allow using "user.overlay." namespace instead of
"trusted.overlay."
This is necessary for overlayfs to be able to be mounted in an unprivileged
namepsace.
Make the option explicit, since it makes the filesystem format be
incompatible.
Disable redirect_dir and metacopy options, because these would allow
privilege escalation through direct manipulation of the
"user.overlay.redirect" or "user.overlay.metacopy" xattrs.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
generic_file_splice_read() and iter_file_splice_write() will call back into
f_op->iter_read() and f_op->iter_write() respectively. These already do
the real file lookup and cred override. So the code in ovl_splice_read()
and ovl_splice_write() is redundant.
In addition the ovl_file_accessed() call in ovl_splice_write() is
incorrect, though probably harmless.
Fix by calling generic_file_splice_read() and iter_file_splice_write()
directly.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_ioctl_set_flags() does a capability check using flags, but then the
real ioctl double-fetches flags and uses potentially different value.
The "Check the capability before cred override" comment misleading: user
can skip this check by presenting benign flags first and then overwriting
them to non-benign flags.
Just remove the cred override for now, hoping this doesn't cause a
regression.
The proper solution is to create a new setxflags i_op (patches are in the
works).
Xfstests don't show a regression.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Fixes: dab5ca8fd9 ("ovl: add lsattr/chattr support")
Cc: <stable@vger.kernel.org> # v4.19
CAP_DAC_READ_SEARCH is required by open_by_handle_at(2) so check it in
ovl_decode_real_fh() as well to prevent privilege escalation for
unprivileged overlay mounts.
[Amir] If the mounter is not capable in init ns, ovl_check_origin() and
ovl_verify_index() will not function as expected and this will break index
and nfs export features. So check capability in ovl_can_decode_fh(), to
auto disable those features.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In metacopy case, we should use ovl_inode_realdata() instead of
ovl_inode_real() to get real inode which has data, so that
we can get correct information of extentes in ->fiemap operation.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When the lower file of a metacopy is inaccessible, -EIO is returned. For
users not familiar with overlayfs internals, such as myself, the meaning of
this error may not be apparent or easy to determine, since the (metacopy)
file is present and open/stat succeed when accessed outside of the overlay.
Add a rate-limited warning for orphan metacopy to give users a hint when
investigating such errors.
Link: https://lore.kernel.org/linux-unionfs/CAOQ4uxi23Zsmfb4rCed1n=On0NNA5KZD74jjjeyz+et32sk-gg@mail.gmail.com/
Signed-off-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This replaces uuid with null in overlayfs file handles and thus relaxes
uuid checks for overlay index feature. It is only possible in case there is
only one filesystem for all the work/upper/lower directories and bare file
handles from this backing filesystem are unique. In other case when we have
multiple filesystems lets just fallback to "uuid=on" which is and
equivalent of how it worked before with all uuid checks.
This is needed when overlayfs is/was mounted in a container with index
enabled (e.g.: to be able to resolve inotify watch file handles on it to
paths in CRIU), and this container is copied and started alongside with the
original one. This way the "copy" container can't have the same uuid on the
superblock and mounting the overlayfs from it later would fail.
That is an example of the problem on top of loop+ext4:
dd if=/dev/zero of=loopbackfile.img bs=100M count=10
losetup -fP loopbackfile.img
losetup -a
#/dev/loop0: [64768]:35 (/loop-test/loopbackfile.img)
mkfs.ext4 loopbackfile.img
mkdir loop-mp
mount -o loop /dev/loop0 loop-mp
mkdir loop-mp/{lower,upper,work,merged}
mount -t overlay overlay -oindex=on,lowerdir=loop-mp/lower,\
upperdir=loop-mp/upper,workdir=loop-mp/work loop-mp/merged
umount loop-mp/merged
umount loop-mp
e2fsck -f /dev/loop0
tune2fs -U random /dev/loop0
mount -o loop /dev/loop0 loop-mp
mount -t overlay overlay -oindex=on,lowerdir=loop-mp/lower,\
upperdir=loop-mp/upper,workdir=loop-mp/work loop-mp/merged
#mount: /loop-test/loop-mp/merged:
#mount(2) system call failed: Stale file handle.
If you just change the uuid of the backing filesystem, overlay is not
mounting any more. In Virtuozzo we copy container disks (ploops) when
create the copy of container and we require fs uuid to be unique for a new
container.
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This will be used in next patch to be able to change uuid checks and add
uuid nullification based on ofs->config.index for a new "uuid=off" mode.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Canonalize to ioctl FS_* flags instead of inode S_* flags.
Note that we do not call the helper vfs_ioc_fssetxattr_check()
for FS_IOC_FSSETXATTR ioctl. The reason is that underlying filesystem
will perform all the checks. We only need to perform the capability
check before overriding credentials.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
[S|G]ETFLAGS and FS[S|G]ETXATTR ioctls are applicable to both files and
directories, so add ioctl operations to dir as well.
We teach ovl_real_fdget() to get the realfile of directories which use
a different type of file->private_data.
Ifdef away compat ioctl implementation to conform to standard practice.
With this change, xfstest generic/079 which tests these ioctls on files
and directories passes.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_can_list() should return false for overlay private xattrs. Since
currently these use the "trusted.overlay." prefix, they will always match
the "trusted." prefix as well, hence the test for being non-trusted will
not trigger.
Prepare for using the "user.overlay." namespace by moving the test for
private xattr before the test for non-trusted.
This patch doesn't change behavior.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Instead of passing the xattr name down to the ovl_do_*xattr() accessor
functions, pass an enumerated value. The enum can use the same names as
the the previous #define for each xattr name.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Call ovl_do_*xattr() when accessing an overlay private xattr, vfs_*xattr()
otherwise.
This has an effect on debug output, which is made more consistent by this
patch.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use the convention of calling ovl_do_foo() for operations which are overlay
specific.
This patch is a no-op, and will have significance for supporting
"user.overlay." xattr namespace.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is a partial revert (with some cleanups) of commit 993a0b2aec ("ovl:
Do not lose security.capability xattr over metadata file copy-up"), which
introduced ovl_getxattr() in the first place.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Lose the padding and the failure message (in line with other parts of the
copy up process). Return zero for both nonexistent or empty xattr.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_getattr() returns the value of an xattr in a kmalloced buffer. There
are two callers:
ovl_copy_up_meta_inode_data() (copy_up.c)
ovl_get_redirect_xattr() (util.c)
This patch just copies ovl_getxattr() to copy_up.c, the following patches
will deal with the differences in idividual callers.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Container folks are complaining that dnf/yum issues too many sync while
installing packages and this slows down the image build. Build requirement
is such that they don't care if a node goes down while build was still
going on. In that case, they will simply throw away unfinished layer and
start new build. So they don't care about syncing intermediate state to the
disk and hence don't want to pay the price associated with sync.
So they are asking for mount options where they can disable sync on overlay
mount point.
They primarily seem to have two use cases.
- For building images, they will mount overlay with nosync and then sync
upper layer after unmounting overlay and reuse upper as lower for next
layer.
- For running containers, they don't seem to care about syncing upper layer
because if node goes down, they will simply throw away upper layer and
create a fresh one.
So this patch provides a mount option "volatile" which disables all forms
of sync. Now it is caller's responsibility to throw away upper if system
crashes or shuts down and start fresh.
With "volatile", I am seeing roughly 20% speed up in my VM where I am just
installing emacs in an image. Installation time drops from 31 seconds to 25
seconds when nosync option is used. This is for the case of building on top
of an image where all packages are already cached. That way I take out the
network operations latency out of the measurement.
Giuseppe is also looking to cut down on number of iops done on the disk. He
is complaining that often in cloud their VMs are throttled if they cross
the limit. This option can help them where they reduce number of iops (by
cutting down on frequent sync and writebacks).
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
An incompatible feature is marked by a non-empty directory nested
2 levels deep under "work" dir, e.g.:
workdir/work/incompat/volatile.
This commit checks for marked incompat features, warns about them
and fails to mount the overlay, for example:
overlayfs: overlay with incompat feature 'volatile' cannot be mounted
Very old kernels (i.e. v3.18) will fail to remove a non-empty "work"
dir and fail the mount. Newer kernels will fail to remove a "work"
dir with entries nested 3 levels and fall back to read-only mount.
User mounting with old kernel will see a warning like these in dmesg:
overlayfs: cleanup of 'incompat/...' failed (-39)
overlayfs: cleanup of 'work/incompat' failed (-39)
overlayfs: cleanup of 'ovl-work/work' failed (-39)
overlayfs: failed to create directory /vdf/ovl-work/work (errno: 17);
mounting read-only
These warnings should give the hint to the user that:
1. mount failure is caused by backward incompatible features
2. mount failure can be resolved by manually removing the "work" directory
There is nothing preventing users on old kernels from manually removing
workdir entirely or mounting overlay with a new workdir, so this is in
no way a full proof backward compatibility enforcement, but only a best
effort.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
We recently moved setting inode flag OVL_UPPERDATA to ovl_lookup().
When looking up an overlay dentry, upperdentry may be found by index
and not by name. In that case, we fail to read the metacopy xattr
and falsly set the OVL_UPPERDATA on the overlay inode.
This caused a regression in xfstest overlay/033 when run with
OVERLAY_MOUNT_OPTIONS="-o metacopy=on".
Fixes: 28166ab3c8 ("ovl: initialize OVL_UPPERDATA in ovl_lookup()")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The check if user has changed the overlay file was wrong, causing unneeded
call to ovl_change_flags() including taking f_lock on every file access.
Fixes: d989903058 ("ovl: do not generate duplicate fsnotify events for "fake" path")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Without upperdir mount option, there is no index dir and the dependency
checks nfs_export => index for mount options parsing are incorrect.
Allow the combination nfs_export=on,index=off with no upperdir and move
the check for dependency redirect_dir=nofollow for non-upper mount case
to mount options parsing.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With index feature enabled, on failure to create index dir, overlay is
being mounted read-only. However, we do not forbid user to remount overlay
read-write. Fix that by setting ofs->workdir to NULL, which prevents
remount read-write.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit 9df085f3c9 ("ovl: relax requirement for non null uuid of lower
fs") relaxed the requirement for non null uuid with single lower layer to
allow enabling index and nfs_export features with single lower squashfs.
Fabian reported a regression in a setup when overlay re-uses an existing
upper layer and re-formats the lower squashfs image. Because squashfs
has no uuid, the origin xattr in upper layer are decoded from the new
lower layer where they may resolve to a wrong origin file and user may
get an ESTALE or EIO error on lookup.
To avoid the reported regression while still allowing the new features
with single lower squashfs, do not allow decoding origin with lower null
uuid unless user opted-in to one of the new features that require
following the lower inode of non-dir upper (index, xino, metacopy).
Reported-by: Fabian <godi.beat@gmx.net>
Link: https://lore.kernel.org/linux-unionfs/32532923.JtPX5UtSzP@fgdesktop/
Fixes: 9df085f3c9 ("ovl: relax requirement for non null uuid of lower fs")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Mounting with nfs_export=on, xfstests overlay/031 triggers a kernel panic
since v5.8-rc1 overlayfs updates.
overlayfs: orphan index entry (index/00fb1..., ftype=4000, nlink=2)
BUG: kernel NULL pointer dereference, address: 0000000000000030
RIP: 0010:ovl_cleanup_and_whiteout+0x28/0x220 [overlay]
Bisect point at commit c21c839b84 ("ovl: whiteout inode sharing")
Minimal reproducer:
--------------------------------------------------
rm -rf l u w m
mkdir -p l u w m
mkdir -p l/testdir
touch l/testdir/testfile
mount -t overlay -o lowerdir=l,upperdir=u,workdir=w,nfs_export=on overlay m
echo 1 > m/testdir/testfile
umount m
rm -rf u/testdir
mount -t overlay -o lowerdir=l,upperdir=u,workdir=w,nfs_export=on overlay m
umount m
--------------------------------------------------
When mount with nfs_export=on, and fail to verify an orphan index, we're
cleaning this index from indexdir by calling ovl_cleanup_and_whiteout().
This dereferences ofs->workdir, that was earlier set to NULL.
The design was that ovl->workdir will point at ovl->indexdir, but we are
assigning ofs->indexdir to ofs->workdir only after ovl_indexdir_cleanup().
There is no reason not to do it sooner, because once we get success from
ofs->indexdir = ovl_workdir_create(... there is no turning back.
Reported-and-tested-by: Murphy Zhou <jencce.kernel@gmail.com>
Fixes: c21c839b84 ("ovl: whiteout inode sharing")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding a lower directory file handle to overlay path with cold
inode/dentry cache may go as follows:
1. Decode real lower file handle to lower dir path
2. Check if lower dir is indexed (was copied up)
3. If indexed, get the upper dir path from index
4. Lookup upper dir path in overlay
5. If overlay path found, verify that overlay lower is the lower dir
from step 1
On failure to verify step 5 above, user will get an ESTALE error and a
WARN_ON will be printed.
A mismatch in step 5 could be a result of lower directory that was renamed
while overlay was offline, after that lower directory has been copied up
and indexed.
This is a scripted reproducer based on xfstest overlay/052:
# Create lower subdir
create_dirs
create_test_files $lower/lowertestdir/subdir
mount_dirs
# Copy up lower dir and encode lower subdir file handle
touch $SCRATCH_MNT/lowertestdir
test_file_handles $SCRATCH_MNT/lowertestdir/subdir -p -o $tmp.fhandle
# Rename lower dir offline
unmount_dirs
mv $lower/lowertestdir $lower/lowertestdir.new/
mount_dirs
# Attempt to decode lower subdir file handle
test_file_handles $SCRATCH_MNT -p -i $tmp.fhandle
Since this WARN_ON() can be triggered by user we need to relax it.
Fixes: 4b91c30a5a ("ovl: lookup connected ancestor of dir in inode cache")
Cc: <stable@vger.kernel.org> # v4.16+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_check_origin outparam 'ctrp' argument not used by caller. So remove
this argument.
Signed-off-by: youngjun <her0gyugyu@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
"ovl_copy_up_flags" is used in copy_up.c.
so, change it static.
Signed-off-by: youngjun <her0gyugyu@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXt9klAAKCRDh3BK/laaZ
PBeeAP9GRI0yajPzBzz2ZK9KkDc6A7wPiaAec+86Q+c02VncVwEAvq5Pi4um5RTZ
7SVv56ggKO3Cqx779zVyZTRYDs3+YA4=
=bpKI
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
"Fixes:
- Resolve mount option conflicts consistently
- Sync before remount R/O
- Fix file handle encoding corner cases
- Fix metacopy related issues
- Fix an unintialized return value
- Add missing permission checks for underlying layers
Optimizations:
- Allow multipe whiteouts to share an inode
- Optimize small writes by inheriting SB_NOSEC from upper layer
- Do not call ->syncfs() multiple times for sync(2)
- Do not cache negative lookups on upper layer
- Make private internal mounts longterm"
* tag 'ovl-update-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (27 commits)
ovl: remove unnecessary lock check
ovl: make oip->index bool
ovl: only pass ->ki_flags to ovl_iocb_to_rwf()
ovl: make private mounts longterm
ovl: get rid of redundant members in struct ovl_fs
ovl: add accessor for ofs->upper_mnt
ovl: initialize error in ovl_copy_xattr
ovl: drop negative dentry in upper layer
ovl: check permission to open real file
ovl: call secutiry hook in ovl_real_ioctl()
ovl: verify permissions in ovl_path_open()
ovl: switch to mounter creds in readdir
ovl: pass correct flags for opening real directory
ovl: fix redirect traversal on metacopy dentries
ovl: initialize OVL_UPPERDATA in ovl_lookup()
ovl: use only uppermetacopy state in ovl_lookup()
ovl: simplify setting of origin for index lookup
ovl: fix out of bounds access warning in ovl_check_fb_len()
ovl: return required buffer size for file handles
ovl: sync dirty data when remounting to ro mode
...
Directory is always locked until "out_unlock" label. So lock check is not
needed.
Signed-off-by: youngjun <her0gyugyu@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
* Fix performance problems found in dioread_nolock now that it is the
default, caused by transaction leaks.
* Clean up fiemap handling in ext4
* Clean up and refactor multiple block allocator (mballoc) code
* Fix a problem with mballoc with a smaller file systems running out
of blocks because they couldn't properly use blocks that had been
reserved by inode preallocation.
* Fixed a race in ext4_sync_parent() versus rename()
* Simplify the error handling in the extent manipulation code
* Make sure all metadata I/O errors are felected to ext4_ext_dirty()'s and
ext4_make_inode_dirty()'s callers.
* Avoid passing an error pointer to brelse in ext4_xattr_set()
* Fix race which could result to freeing an inode on the dirty last
in data=journal mode.
* Fix refcount handling if ext4_iget() fails
* Fix a crash in generic/019 caused by a corrupted extent node
-----BEGIN PGP SIGNATURE-----
iQEyBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl7Ze8kACgkQ8vlZVpUN
gaNChAf4xn0ytFSrweI/S2Sp05G/2L/ocZ2TZZk2ZdGeN1E+ABdSIv/zIF9zuFgZ
/pY/C+fyEZWt4E3FlNO8gJzoEedkzMCMnUhSIfI+wZbcclyTOSNMJtnrnJKAEtVH
HOvGZJmg357jy407RCGhZpJ773nwU2xhBTr5OFxvSf9mt/vzebxIOnw5D7HPlC1V
Fgm6Du8q+tRrPsyjv1Yu4pUEVXMJ7qUcvt326AXVM3kCZO1Aa5GrURX0w3J4mzW1
tc1tKmtbLcVVYTo9CwHXhk/edbxrhAydSP2iACand3tK6IJuI6j9x+bBJnxXitnr
vsxsfTYMG18+2SxrJ9LwmagqmrRq
=HMTs
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A lot of bug fixes and cleanups for ext4, including:
- Fix performance problems found in dioread_nolock now that it is the
default, caused by transaction leaks.
- Clean up fiemap handling in ext4
- Clean up and refactor multiple block allocator (mballoc) code
- Fix a problem with mballoc with a smaller file systems running out
of blocks because they couldn't properly use blocks that had been
reserved by inode preallocation.
- Fixed a race in ext4_sync_parent() versus rename()
- Simplify the error handling in the extent manipulation code
- Make sure all metadata I/O errors are felected to
ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers.
- Avoid passing an error pointer to brelse in ext4_xattr_set()
- Fix race which could result to freeing an inode on the dirty last
in data=journal mode.
- Fix refcount handling if ext4_iget() fails
- Fix a crash in generic/019 caused by a corrupted extent node"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
ext4: avoid unnecessary transaction starts during writeback
ext4: don't block for O_DIRECT if IOCB_NOWAIT is set
ext4: remove the access_ok() check in ext4_ioctl_get_es_cache
fs: remove the access_ok() check in ioctl_fiemap
fs: handle FIEMAP_FLAG_SYNC in fiemap_prep
fs: move fiemap range validation into the file systems instances
iomap: fix the iomap_fiemap prototype
fs: move the fiemap definitions out of fs.h
fs: mark __generic_block_fiemap static
ext4: remove the call to fiemap_check_flags in ext4_fiemap
ext4: split _ext4_fiemap
ext4: fix fiemap size checks for bitmap files
ext4: fix EXT4_MAX_LOGICAL_BLOCK macro
add comment for ext4_dir_entry_2 file_type member
jbd2: avoid leaking transaction credits when unreserving handle
ext4: drop ext4_journal_free_reserved()
ext4: mballoc: use lock for checking free blocks while retrying
ext4: mballoc: refactor ext4_mb_good_group()
ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling
ext4: mballoc: refactor ext4_mb_discard_preallocations()
...
Overlayfs is using clone_private_mount() to create internal mounts for
underlying layers. These are used for operations requiring a path, such as
dentry_open().
Since these private mounts are not in any namespace they are treated as
short term, "detached" mounts and mntput() involves taking the global
mount_lock, which can result in serious cacheline pingpong.
Make these private mounts longterm instead, which trade the penalty on
mntput() for a slightly longer shutdown time due to an added RCU grace
period when putting these mounts.
Introduce a new helper kern_unmount_many() that can take care of multiple
longterm mounts with a single RCU grace period.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ofs->upper_mnt is copied to ->layers[0].mnt and ->layers[0].trap could be
used instead of a separate ->upperdir_trap.
Split the lowerdir option early to get the number of layers, then allocate
the ->layers array, and finally fill the upper and lower layers, as before.
Get rid of path_put_init() in ovl_lower_dir(), since the only caller will
take care of that.
[Colin Ian King] Fix null pointer dereference on null stack pointer on
error return found by Coverity.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In ovl_copy_xattr, if all the xattrs to be copied are overlayfs private
xattrs, the copy loop will terminate without assigning anything to the
error variable, thus returning an uninitialized value.
If ovl_copy_xattr is called from ovl_clear_empty, this uninitialized error
value is put into a pointer by ERR_PTR(), causing potential invalid memory
accesses down the line.
This commit initialize error with 0. This is the correct value because when
there's no xattr to copy, because all xattrs are private, ovl_copy_xattr
should succeed.
This bug is discovered with the help of INIT_STACK_ALL and clang.
Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
Link: https://bugs.chromium.org/p/chromium/issues/detail?id=1050405
Fixes: 0956254a2d ("ovl: don't copy up opaqueness")
Cc: stable@vger.kernel.org # v4.8
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
By moving FIEMAP_FLAG_SYNC handling to fiemap_prep we ensure it is
handled once instead of duplicated, but can still be done under fs locks,
like xfs/iomap intended with its duplicate handling. Also make sure the
error value of filemap_write_and_wait is propagated to user space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-8-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
No need to pull the fiemap definitions into almost every file in the
kernel build.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-5-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Negative dentries of upper layer are useless after construction of
overlayfs' own dentry and may keep in the memory long time even after
unmount of overlayfs instance. This patch tries to drop unnecessary
negative dentry of upper layer to effectively reclaim memory.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Call inode_permission() on real inode before opening regular file on one of
the underlying layers.
In some cases ovl_permission() already checks access to an underlying file,
but it misses the metacopy case, and possibly other ones as well.
Removing the redundant permission check from ovl_permission() should be
considered later.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Verify LSM permissions for underlying file, since vfs_ioctl() doesn't do
it.
[Stephen Rothwell] export security_file_ioctl
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Check permission before opening a real file.
ovl_path_open() is used by readdir and copy-up routines.
ovl_permission() theoretically already checked copy up permissions, but it
doesn't hurt to re-do these checks during the actual copy-up.
For directory reading ovl_permission() only checks access to topmost
underlying layer. Readdir on a merged directory accesses layers below the
topmost one as well. Permission wasn't checked for these layers.
Note: modifying ovl_permission() to perform this check would be far more
complex and hence more bug prone. The result is less precise permissions
returned in access(2). If this turns out to be an issue, we can revisit
this bug.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In preparation for more permission checking, override credentials for
directory operations on the underlying filesystems.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The three instances of ovl_path_open() in overlayfs/readdir.c do three
different things:
- pass f_flags from overlay file
- pass O_RDONLY | O_DIRECTORY
- pass just O_RDONLY
The value of f_flags can be (other than O_RDONLY):
O_WRONLY - not possible for a directory
O_RDWR - not possible for a directory
O_CREAT - masked out by dentry_open()
O_EXCL - masked out by dentry_open()
O_NOCTTY - masked out by dentry_open()
O_TRUNC - masked out by dentry_open()
O_APPEND - no effect on directory ops
O_NDELAY - no effect on directory ops
O_NONBLOCK - no effect on directory ops
__O_SYNC - no effect on directory ops
O_DSYNC - no effect on directory ops
FASYNC - no effect on directory ops
O_DIRECT - no effect on directory ops
O_LARGEFILE - ?
O_DIRECTORY - only affects lookup
O_NOFOLLOW - only affects lookup
O_NOATIME - overlay sets this unconditionally in ovl_path_open()
O_CLOEXEC - only affects fd allocation
O_PATH - no effect on directory ops
__O_TMPFILE - not possible for a directory
Fon non-merge directories we use the underlying filesystem's iterate; in
this case honor O_LARGEFILE from the original file to make sure that open
doesn't get rejected.
For merge directories it's safe to pass O_LARGEFILE unconditionally since
userspace will only see the artificial offsets created by overlayfs.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Amir pointed me to metacopy test cases in unionmount-testsuite and I
decided to run "./run --ov=10 --meta" and it failed while running test
"rename-mass-5.py".
Problem is w.r.t absolute redirect traversal on intermediate metacopy
dentry. We do not store intermediate metacopy dentries and also skip
current loop/layer and move onto lookup in next layer. But at the end of
loop, we have logic to reset "poe" and layer index if currnently looked up
dentry has absolute redirect. We skip all that and that means lookup in
next layer will fail.
Following is simple test case to reproduce this.
- mkdir -p lower upper work merged lower/a lower/b
- touch lower/a/foo.txt
- mount -t overlay -o lowerdir=lower,upperdir=upper,workdir=work,metacopy=on none merged
# Following will create absolute redirect "/a/foo.txt" on upper/b/bar.txt.
- mv merged/a/foo.txt merged/b/bar.txt
# unmount overlay and use upper as lower layer (lower2) for next mount.
- umount merged
- mv upper lower2
- rm -rf work; mkdir -p upper work
- mount -t overlay -o lowerdir=lower2:lower,upperdir=upper,workdir=work,metacopy=on none merged
# Force a metacopy copy-up
- chown bin:bin merged/b/bar.txt
# unmount overlay and use upper as lower layer (lower3) for next mount.
- umount merged
- mv upper lower3
- rm -rf work; mkdir -p upper work
- mount -t overlay -o lowerdir=lower3:lower2:lower,upperdir=upper,workdir=work,metacopy=on none merged
# ls merged/b/bar.txt
ls: cannot access 'bar.txt': Input/output error
Intermediate lower layer (lower2) has metacopy dentry b/bar.txt with
absolute redirect "/a/foo.txt". We skipped redirect processing at the end
of loop which sets poe to roe and sets the appropriate next lower layer
index. And that means lookup failed in next layer.
Fix this by continuing the loop for any intermediate dentries. We still do
not save these at lower stack. With this fix applied unionmount-testsuite,
"./run --ov-10 --meta" now passes.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently ovl_get_inode() initializes OVL_UPPERDATA flag and for that it
has to call ovl_check_metacopy_xattr() and check if metacopy xattr is
present or not.
yangerkun reported sometimes underlying filesystem might return -EIO and in
that case error handling path does not cleanup properly leading to various
warnings.
Run generic/461 with ext4 upper/lower layer sometimes may trigger the bug
as below(linux 4.19):
[ 551.001349] overlayfs: failed to get metacopy (-5)
[ 551.003464] overlayfs: failed to get inode (-5)
[ 551.004243] overlayfs: cleanup of 'd44/fd51' failed (-5)
[ 551.004941] overlayfs: failed to get origin (-5)
[ 551.005199] ------------[ cut here ]------------
[ 551.006697] WARNING: CPU: 3 PID: 24674 at fs/inode.c:1528 iput+0x33b/0x400
...
[ 551.027219] Call Trace:
[ 551.027623] ovl_create_object+0x13f/0x170
[ 551.028268] ovl_create+0x27/0x30
[ 551.028799] path_openat+0x1a35/0x1ea0
[ 551.029377] do_filp_open+0xad/0x160
[ 551.029944] ? vfs_writev+0xe9/0x170
[ 551.030499] ? page_counter_try_charge+0x77/0x120
[ 551.031245] ? __alloc_fd+0x160/0x2a0
[ 551.031832] ? do_sys_open+0x189/0x340
[ 551.032417] ? get_unused_fd_flags+0x34/0x40
[ 551.033081] do_sys_open+0x189/0x340
[ 551.033632] __x64_sys_creat+0x24/0x30
[ 551.034219] do_syscall_64+0xd5/0x430
[ 551.034800] entry_SYSCALL_64_after_hwframe+0x44/0xa9
One solution is to improve error handling and call iget_failed() if error
is encountered. Amir thinks that this path is little intricate and there
is not real need to check and initialize OVL_UPPERDATA in ovl_get_inode().
Instead caller of ovl_get_inode() can initialize this state. And this will
avoid double checking of metacopy xattr lookup in ovl_lookup() and
ovl_get_inode().
OVL_UPPERDATA is inode flag. So I was little concerned that initializing
it outside ovl_get_inode() might have some races. But this is one way
transition. That is once a file has been fully copied up, it can't go back
to metacopy file again. And that seems to help avoid races. So as of now
I can't see any races w.r.t OVL_UPPERDATA being set wrongly. So move
settingof OVL_UPPERDATA inside the callers of ovl_get_inode().
ovl_obtain_alias() already does it. So only two callers now left are
ovl_lookup() and ovl_instantiate().
Reported-by: yangerkun <yangerkun@huawei.com>
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently we use a variable "metacopy" which signifies that dentry could be
either uppermetacopy or lowermetacopy. Amir suggested that we can move
code around and use d.metacopy in such a way that we don't need
lowermetacopy and just can do away with uppermetacopy.
So this patch replaces "metacopy" with "uppermetacopy".
It also moves some code little higher to keep reading little simpler.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
overlayfs can keep index of copied up files and directories and it seems to
serve two primary puroposes. For regular files, it avoids breaking lower
hardlinks over copy up. For directories it seems to be used for various
error checks.
During ovl_lookup(), we lookup for index using lower dentry in many a
cases. That lower dentry is called "origin" and following is a summary of
current logic.
If there is no upperdentry, always lookup for index using lower dentry.
For regular files it helps avoiding breaking hard links over copyup and for
directories it seems to be just error checks.
If there is an upperdentry, then there are 3 possible cases.
- For directories, lower dentry is found using two ways. One is regular
path based lookup in lower layers and second is using ORIGIN xattr on
upper dentry. First verify that path based lookup lower dentry matches
the one pointed by upper ORIGIN xattr. If yes, use this verified origin
for index lookup.
- For regular files (non-metacopy), there is no path based lookup in lower
layers as lookup stops once we find upper dentry. So there is no origin
verification. If there is ORIGIN xattr present on upper, use that to
lookup index otherwise don't.
- For regular metacopy files, again lower dentry is found using path based
lookup as well as ORIGIN xattr on upper. Path based lookup is continued
in this case to find lower data dentry for metacopy upper. So like
directories we only use verified origin. If ORIGIN xattr is not present
(Either because lower did not support file handles or because this is
hardlink copied up with index=off), then don't use path lookup based
lower dentry as origin. This is same as regular non-metacopy file case.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
syzbot reported out of bounds memory access from open_by_handle_at()
with a crafted file handle that looks like this:
{ .handle_bytes = 2, .handle_type = OVL_FILEID_V1 }
handle_bytes gets rounded down to 0 and we end up calling:
ovl_check_fh_len(fh, 0) => ovl_check_fb_len(fh + 3, -3)
But fh buffer is only 2 bytes long, so accessing struct ovl_fb at
fh + 3 is illegal.
Fixes: cbe7fba8ed ("ovl: make sure that real fid is 32bit aligned in memory")
Reported-and-tested-by: syzbot+61958888b1c60361a791@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> # v5.5
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
set from Mauro toward the completion of the RST conversion. I *really*
hope we are getting close to the end of this. Meanwhile, those patches
reach pretty far afield to update document references around the tree;
there should be no actual code changes there. There will be, alas, more of
the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots of
fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7VId8PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yq/gH/iaDgirQZV6UZ2v9sfwQNYolNpf2sKAuOZjd
bPFB7WJoMQbKwQEvYrAUL2+5zPOcLYuIfzyOfo1BV1py+EyKbACcKjI4AedxfJF7
+NchmOBhlEqmEhzx2U08HRc4/8J223WG17fJRVsV3p+opJySexSFeQucfOciX5NR
RUCxweWWyg/FgyqjkyMMTtsePqZPmcT5dWTlVXISlbWzcv5NFhuJXnSrw8Sfzcmm
SJMzqItv3O+CabnKQ8kMLV2PozXTMfjeWH47ZUK0Y8/8PP9+cvqwFzZ0UDQJ1Xaz
oyW/TqmunaXhfMsMFeFGSwtfgwRHvXdxkQdtwNHvo1dV4dzTvDw=
=fDC/
-----END PGP SIGNATURE-----
Merge tag 'docs-5.8' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A fair amount of stuff this time around, dominated by yet another
massive set from Mauro toward the completion of the RST conversion. I
*really* hope we are getting close to the end of this. Meanwhile,
those patches reach pretty far afield to update document references
around the tree; there should be no actual code changes there. There
will be, alas, more of the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots
of fixes"
* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
Documentation: fixes to the maintainer-entry-profile template
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
tracing: Fix events.rst section numbering
docs: acpi: fix old http link and improve document format
docs: filesystems: add info about efivars content
Documentation: LSM: Correct the basic LSM description
mailmap: change email for Ricardo Ribalda
docs: sysctl/kernel: document unaligned controls
Documentation: admin-guide: update bug-hunting.rst
docs: sysctl/kernel: document ngroups_max
nvdimm: fixes to maintainter-entry-profile
Documentation/features: Correct RISC-V kprobes support entry
Documentation/features: Refresh the arch support status files
Revert "docs: sysctl/kernel: document ngroups_max"
docs: move locking-specific documents to locking/
docs: move digsig docs to the security book
docs: move the kref doc into the core-api book
docs: add IRQ documentation at the core-api book
docs: debugging-via-ohci1394.txt: add it to the core-api book
docs: fix references for ipmi.rst file
...
Overlayfs doesn't work well with the fanotify mechanism.
Fanotify first probes for the required buffer size for the file handle,
but overlayfs currently bails out without passing the size back.
That results in errors in the kernel log, such as:
[527944.485384] overlayfs: failed to encode file handle (/, err=-75, buflen=0, len=29, type=1)
[527944.485386] fanotify: failed to encode fid (fsid=ae521e68.a434d95f, type=255, bytes=0, err=-2)
Signed-off-by: Lubos Dolezel <lubos@dolezel.info>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
sync_filesystem() does not sync dirty data for readonly filesystem during
umount, so before changing to readonly filesystem we should sync dirty data
for data integrity.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Share inode with different whiteout files for saving inode and speeding up
delete operation.
If EMLINK is encountered when linking a shared whiteout, create a new one.
In case of any other error, disable sharing for this super block.
Note: ofs->whiteout is protected by inode lock on workdir.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Since the stacking of regular file operations [1], the overlayfs edition of
write_iter() is called when writing regular files.
Since then, xattr lookup is needed on every write since file_remove_privs()
is called from ovl_write_iter(), which would become the performance
bottleneck when writing small chunks of data. In my test case,
file_remove_privs() would consume ~15% CPU when running fstime of unixbench
(the workload is repeadly writing 1 KB to the same file) [2].
Inherit the SB_NOSEC flag from upperdir. Since then xattr lookup would be
done only once on the first write. Unixbench fstime gets a ~20% performance
gain with this patch.
[1] https://lore.kernel.org/lkml/20180606150905.GC9426@magnolia/T/
[2] https://www.spinics.net/lists/linux-unionfs/msg07153.html
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Stacked filesystems like overlayfs has no own writeback, but they have to
forward syncfs() requests to backend for keeping data integrity.
During global sync() each overlayfs instance calls method ->sync_fs() for
backend although it itself is in global list of superblocks too. As a
result one syscall sync() could write one superblock several times and send
multiple disk barriers.
This patch adds flag SB_I_SKIP_SYNC into sb->sb_iflags to avoid that.
Reported-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With index=on, let index dir act as the work dir for copy up and cleanups.
This will help implementing whiteout inode sharing.
We still create the "work" dir on mount regardless of index=on and it is
used to test the features supported by upper fs. One reason is that before
the feature tests, we do not know if index could be enabled or not.
The reason we do not use "index" directory also as workdir with index=off
is because the existence of the "index" directory acts as a simple
persistent signal that index was enabled on this filesystem and tools may
want to use that signal.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With index=on, we copy up lower hardlinks to work dir and move them into
index dir. Fix locking to allow work dir and index dir to be the same
directory.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Teach ovl_indexdir_cleanup() to remove temp directories containing
whiteouts to prepare for using index dir instead of work dir for removing
merge directories.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Similar to the way that a conflict between metacopy=on,redirect_dir=off is
resolved, also resolve conflicts between nfs_export=on,index=off and
nfs_export=on,metacopy=on.
An explicit mount option wins over a default config value. Both explicit
mount options result in an error.
Without this change the xfstests group overlay/exportfs are skipped if
metacopy is enabled by default.
Reported-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The "buflen" value comes from the user and there is a potential that it
could be zero. In do_handle_to_path() we know that "handle->handle_bytes"
is non-zero and we do:
handle_dwords = handle->handle_bytes >> 2;
So values 1-3 become zero. Then in ovl_fh_to_dentry() we do:
int len = fh_len << 2;
So now len is in the "0,4-128" range and a multiple of 4. But if
"buflen" is zero it will try to copy negative bytes when we do the
memcpy in ovl_fid_to_fh().
memcpy(&fh->fb, fid, buflen - OVL_FH_WIRE_OFFSET);
And that will lead to a crash. Thanks to Amir Goldstein for his help
with this patch.
Fixes: cbe7fba8ed ("ovl: make sure that real fid is 32bit aligned in memory")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Cc: <stable@vger.kernel.org> # v5.5
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
As of now during open(), we don't pass bunch of flags to underlying
filesystem. O_TRUNC is one of these. Normally this is not a problem as VFS
calls ->setattr() with zero size and underlying filesystem sets file size
to 0.
But when overlayfs is running on top of virtiofs, it has an optimization
where it does not send setattr request to server if dectects that
truncation is part of open(O_TRUNC). It assumes that server already zeroed
file size as part of open(O_TRUNC).
fuse_do_setattr() {
if (attr->ia_valid & ATTR_OPEN) {
/*
* No need to send request to userspace, since actual
* truncation has already been done by OPEN. But still
* need to truncate page cache.
*/
}
}
IOW, fuse expects O_TRUNC to be passed to it as part of open flags.
But currently overlayfs does not pass O_TRUNC to underlying filesystem
hence fuse/virtiofs breaks. Setup overlayfs on top of virtiofs and
following does not zero the file size of a file is either upper only or has
already been copied up.
fd = open(foo.txt, O_TRUNC | O_WRONLY);
There are two ways to fix this. Either pass O_TRUNC to underlying
filesystem or clear ATTR_OPEN from attr->ia_valid so that fuse ends up
sending a SETATTR request to server. Miklos is concerned that O_TRUNC might
have side affects so it is better to clear ATTR_OPEN for now. Hence this
patch clears ATTR_OPEN from attr->ia_valid.
I found this problem while running unionmount-testsuite. With this patch,
unionmount-testsuite passes with overlayfs on top of virtiofs.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Fixes: bccece1ead ("ovl: allow remote upper")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_setattr() can be passed an attr which has ATTR_FILE set and
attr->ia_file is a file pointer to overlay file. This is done in
open(O_TRUNC) path.
We should either replace with attr->ia_file with underlying file object or
clear ATTR_FILE so that underlying filesystem does not end up using
overlayfs file object pointer.
There are no good use cases yet so for now clear ATTR_FILE. fuse seems to
be one user which can use this. But it can work even without this. So it
is not mandatory to pass ATTR_FILE to fuse.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Fixes: bccece1ead ("ovl: allow remote upper")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Several references got broken due to txt to ReST conversion.
Several of them can be automatically fixed with:
scripts/documentation-file-ref-check --fix
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # hwtracing/coresight/Kconfig
Reviewed-by: Paul E. McKenney <paulmck@kernel.org> # memory-barrier.txt
Acked-by: Alex Shi <alex.shi@linux.alibaba.com> # translations/zh_CN
Acked-by: Federico Vaga <federico.vaga@vaga.pv.it> # translations/it_IT
Acked-by: Marc Zyngier <maz@kernel.org> # kvm/arm64
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6f919ddb83a33b5f2a63b6b5f0575737bb2b36aa.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
So far, with xino=auto, we only enable xino if we know that all
underlying filesystem use 32bit inode numbers.
When users configure overlay with xino=auto, they already declare that
they are ready to handle 64bit inode number from overlay.
It is a very common case, that underlying filesystem uses 64bit ino,
but rarely or never uses the high inode number bits (e.g. tmpfs, xfs).
Leaving it for the users to declare high ino bits are unused with
xino=on is not a recipe for many users to enjoy the benefits of xino.
There appears to be very little reason not to enable xino when users
declare xino=auto even if we do not know how many bits underlying
filesystem uses for inode numbers.
In the worst case of xino bits overflow by real inode number, we
already fall back to the non-xino behavior - real inode number with
unique pseudo dev or to non persistent inode number and overlay st_dev
(for directories).
The only annoyance from auto enabling xino is that xino bits overflow
emits a warning to kmsg. Suppress those warnings unless users explicitly
asked for xino=on, suggesting that they expected high ino bits to be
unused by underlying filesystem.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When xino feature is enabled and a real directory inode number overflows
the lower xino bits, we cannot map this directory inode number to a unique
and persistent inode number and we fall back to the real inode st_ino and
overlay st_dev.
The real inode st_ino with high bits may collide with a lower inode number
on overlay st_dev that was mapped using xino.
To avoid possible collision with legitimate xino values, map a non
persistent inode number to a dedicated range in the xino address space.
The dedicated range is created by adding one more bit to the number of
reserved high xino bits. We could have added just one more fsid, but that
would have had the undesired effect of changing persistent overlay inode
numbers on kernel or require more complex xino mapping code.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There is no reason to deplete the system's global get_next_ino() pool for
overlay non-persistent inode numbers and there is no reason at all to
allocate non-persistent inode numbers for non-directories.
For non-directories, it is much better to leave i_ino the same as real
i_ino, to be consistent with st_ino/d_ino.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Changes to underlying layers should not cause WARN_ON(), but this repro
does:
mkdir w l u mnt
sudo mount -t overlay -o workdir=w,lowerdir=l,upperdir=u overlay mnt
touch mnt/h
ln u/h u/k
rm -rf mnt/k
rm -rf mnt/h
dmesg
------------[ cut here ]------------
WARNING: CPU: 1 PID: 116244 at fs/inode.c:302 drop_nlink+0x28/0x40
After upper hardlinks were added while overlay is mounted, unlinking all
overlay hardlinks drops overlay nlink to zero before all upper inodes
are unlinked.
After unlink/rename prevent i_nlink from going to zero if there are still
hashed aliases (i.e. cached hard links to the victim) remaining.
Reported-by: Phasip <phasip@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare variable-length
types such as these ones is a flexible array member[1][2], introduced in
C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by this
change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Fixes: cbe7fba8ed ("ovl: make sure that real fid is 32bit aligned in memory")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The situation is the same as for __d_obtain_alias() (which is what that
thing is parallel to) - if we find a preexisting alias, we want to grab it,
drop the inode and return the alias we'd found.
The only thing d_instantiate_anon() does compared to that is spurious
security_d_instiate() that has already been done to that dentry with exact
same arguments.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlayfs works sub-optimally with upper fs that has no xattr/d_type/
RENAME_WHITEOUT support. We should basically deprecate support for those
filesystems, but so far, we only issue a warning and don't fail the mount
for the sake of backward compat. Some features are already being disabled
with no xattr support.
For newly supported remote upper fs, we do not need to worry about backward
compatibility, so we can fail the mount if upper fs is a sub-optimal
filesystem.
This reduces the in-tree remote filesystems supported as upper to just
FUSE, for which the remote upper fs support was added.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
As with other required upper fs features, we only warn if support is
missing to avoid breaking existing sub-optimal setups.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
No reason to prevent upper layer being a remote filesystem. Do the
revalidation in that case, just as we already do for lower layers.
This lets virtiofs be used as upper layer, which appears to be a real use
case.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Allow completely skipping ->revalidate() on a per-dentry basis, in case the
underlying layers used for a dentry do not themselves have ->revalidate().
E.g. negative overlay dentry has no underlying layers, hence revalidate is
unnecessary. Or if lower layer is remote but overlay dentry is pure-upper,
then can skip revalidate.
The following places need to update whether the dentry needs revalidate or
not:
- fill-super (root dentry)
- lookup
- create
- fh_to_dentry
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Following patch will allow remote as upper layer, but not overlay stacked
on upper layer. Separate the two concepts.
This patch is doesn't change behavior.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use a common loop for plain and weak revalidation. This will aid doing
revalidation on upper layer.
This patch doesn't change behavior.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This issue came up with NFSv4 as the lower layer, which generates
"system.nfs4_acl" xattrs (even for plain old unix permissions). Prior to
this patch this prevented copy-up from succeeding.
The overlayfs permission model mandates that permissions are checked
locally for the task and remotely for the mounter(*). NFS4 ACLs are not
supported by the Linux kernel currently, hence they cannot be enforced
locally. Which means it is indifferent whether this attribute is copied or
not.
Generalize this to any xattr that is not used in access checking (i.e. it's
not a POSIX ACL and not in the "security." namespace).
Incidentally, best effort copying of xattrs seems to also be the behavior
of "cp -a", which is what overlayfs tries to mimic.
(*) Documentation/filesystems/overlayfs.txt#Permission model
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move i_ino initialization to ovl_inode_init() to avoid the dance of setting
i_ino in ovl_fill_inode() sometimes on the first call and sometimes on the
seconds call.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Allocates and initializes the root dentry and inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_inode_update() is no longer called from create object code path.
Fixes: 01b39dcc95 ("ovl: use inode_insert5() to hash a newly...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit 6dde1e42f4 ("ovl: make i_ino consistent with st_ino in more
cases"), relaxed the condition nfs_export=on in order to set the value of
i_ino to xino map of real ino.
Specifically, it also relaxed the pre-condition that index=on for
consistent i_ino. This opened the corner case of lower hardlink in
ovl_get_inode(), which calls ovl_fill_inode() with ino=0 and then
ovl_init_inode() is called to set i_ino to lower real ino without the xino
mapping.
Pass the correct values of ino;fsid in this case to ovl_fill_inode(), so it
can initialize i_ino correctly.
Fixes: 6dde1e42f4 ("ovl: make i_ino consistent with st_ino in more ...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Lockdep reports "WARNING: lock held when returning to user space!" due to
async write holding freeze lock over the write. Apparently aio.c already
deals with this by lying to lockdep about the state of the lock.
Do the same here. No need to check for S_IFREG() here since these file ops
are regular-only.
Reported-by: syzbot+9331a354f4f624a52a55@syzkaller.appspotmail.com
Fixes: 2406a307ac ("ovl: implement async IO routines")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fix up two bugs in the coversion to xino_mode:
1. xino=off does not always end up in disabled mode
2. xino=auto on 32bit arch should end up in disabled mode
Take a proactive approach to disabling xino on 32bit kernel:
1. Disable XINO_AUTO config during build time
2. Disable xino with a warning on mount time
As a by product, xino=on on 32bit arch also ends up in disabled mode.
We never intended to enable xino on 32bit arch and this will make the
rest of the logic simpler.
Fixes: 0f831ec85e ("ovl: simplify ovl_same_sb() helper")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_inode_lock() is interruptible. When inode_lock() in ovl_llseek()
was replaced with ovl_inode_lock(), we did not add a check for error.
Fix this by making ovl_inode_lock() uninterruptible and change the
existing call sites to use an _interruptible variant.
Reported-by: syzbot+66a9752fa927f745385e@syzkaller.appspotmail.com
Fixes: b1f9d3858f ("ovl: use ovl_inode_lock in ovl_llseek()")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_lseek() is using ssize_t to return the value from vfs_llseek(). On a
32-bit kernel ssize_t is a 32-bit signed int, which overflows above 2 GB.
Assign the return value of vfs_llseek() to loff_t to fix this.
Reported-by: Boris Gjenero <boris.gjenero@gmail.com>
Fixes: 9e46b840c7 ("ovl: support stacked SEEK_HOLE/SEEK_DATA")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Now overlayfs falls back to use default file splice read
and write, which is not compatiple with overlayfs, returning
EFAULT. xfstests generic/591 can reproduce part of this.
Tested this patch with xfstests auto group tests.
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A performance regression was observed since linux v4.19 with aio test using
fio with iodepth 128 on overlayfs. The queue depth of the device was
always 1 which is unexpected.
After investigation, it was found that commit 16914e6fc7 ("ovl: add
ovl_read_iter()") and commit 2a92e07edc ("ovl: add ovl_write_iter()")
resulted in vfs_iter_{read,write} being called on underlying filesystem,
which always results in syncronous IO.
Implement async IO for stacked reading and writing. This resolves the
performance regresion.
This is implemented by allocating a new kiocb for submitting the AIO
request on the underlying filesystem. When the request is completed, the
new kiocb is freed and the completion callback is called on the original
iocb.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On non-samefs overlay without xino, non pure upper inodes should use a
pseudo_dev assigned to each unique lower fs, but if lower layer is on the
same fs and upper layer, it has no pseudo_dev assigned.
In this overlay layers setup:
- two filesystems, A and B
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
Non pure upper overlay inode, whose origin is in layer 1 will have the
st_dev;st_ino values of the real lower inode before copy up and the
st_dev;st_ino values of the real upper inode after copy up.
Fix this inconsitency by assigning a unique pseudo_dev also for upper fs,
that will be used as st_dev value along with the lower inode st_dev for
overlay inodes in the case above.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This fixes ovl_lower_uuid_ok() to correctly detect the corner case:
- two filesystems, A and B, both have null uuid
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
In this case, bad_uuid would not have been set for B, because the check
only involved the list of lower fs. Hence we'll try to decode a layer 2
origin on layer 1 and fail.
We check for conflicting (and null) uuid among all lower layers, including
those layers that are on the same fs as the upper layer.
Reported-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Rename lower_fs[] array to fs[], extend its size by one and use index fsid
(instead of fsid-1) to access the fs[] array.
Initialize fs[0] with upper fs values. fsid 0 is reserved even with lower
only overlay, so fs[0] remains null in this case.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
No code uses the sb returned from this helper, so make it retrun a boolean
and rename it to ovl_same_fs().
The xino mode is irrelevant when all layers are on same fs, so instead of
describing samefs with mode OVL_XINO_OFF, use a new xino_mode state, which
is 0 in the case of samefs, -1 in the case of xino=off and > 0 with xino
enabled.
Create a new helper ovl_same_dev(), to use instead of the common check for
(ovl_same_fs() || xinobits).
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Rename lower_layers[] array to layers[], extend its size by one and
initialize layers[0] with upper layer values. Lower layers are now
addressed with index 1..numlower. layers[0] is reserved even with lower
only overlay.
[SzM: replace ofs->numlower with ofs->numlayer, the latter's value is
incremented by one]
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Current copy-up is not efficient for big sparse file,
It's not only slow but also wasting more disk space
when the target lower file has huge hole inside.
This patch tries to recognize file hole and skip it
during copy-up.
Detail logic of hole detection as below:
When we detect next data position is larger than current
position we will skip that hole, otherwise we copy
data in the size of OVL_COPY_UP_CHUNK_SIZE. Actually,
it may not recognize all kind of holes and sometimes
only skips partial of hole area. However, it will be
enough for most of the use cases.
Additionally, this optimization relies on lseek(2)
SEEK_DATA implementation, so for some specific
filesystems which do not support this feature
will behave as before on copy-up.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In ovl_llseek() we use the overlay inode rwsem to protect against
concurrent modifications to real file f_pos, because we copy the overlay
file f_pos to/from the real file f_pos.
This caused a lockdep warning of locking order violation when the
ovl_llseek() operation was called on a lower nested overlay layer while the
upper layer fs sb_writers is held (with patch improving copy-up efficiency
for big sparse file).
Use the internal ovl_inode_lock() instead of the overlay inode rwsem in
those cases. It is meant to be used for protecting against concurrent
changes to overlay inode internal state changes.
The locking order rules are documented to explain this case.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The WARN_ON() that child entry is always on overlay st_dev became wrong
when we allowed this function to update d_ino in non-samefs setup with xino
enabled.
It is not true in case of xino bits overflow on a non-dir inode. Leave the
WARN_ON() only for directories, where assertion is still true.
Fixes: adbf4f7ea8 ("ovl: consistent d_ino for non-samefs with xino")
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXfNhGQAKCRDh3BK/laaZ
PGSEAP9Nyv3XCN2wdqMLdrgn07B3Pk9w2Unf3Y5amKOxNXqyQwEAy2/E6DCiGjSa
WRheJoTgDSeqUQNY6GFHsCIgLWOCHgs=
=WH5O
-----END PGP SIGNATURE-----
Merge tag 'ovl-fixes-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix some bugs and documentation"
* tag 'ovl-fixes-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
docs: filesystems: overlayfs: Fix restview warnings
docs: filesystems: overlayfs: Rename overlayfs.txt to .rst
ovl: relax WARN_ON() on rename to self
ovl: fix corner case of non-unique st_dev;st_ino
ovl: don't use a temp buf for encoding real fh
ovl: make sure that real fid is 32bit aligned in memory
ovl: fix lookup failure on multi lower squashfs
In ovl_rename(), if new upper is hardlinked to old upper underneath
overlayfs before upper dirs are locked, user will get an ESTALE error
and a WARN_ON will be printed.
Changes to underlying layers while overlayfs is mounted may result in
unexpected behavior, but it shouldn't crash the kernel and it shouldn't
trigger WARN_ON() either, so relax this WARN_ON().
Reported-by: syzbot+bb1836a212e69f8e201a@syzkaller.appspotmail.com
Fixes: 804032fabb ("ovl: don't check rename to self")
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On non-samefs overlay without xino, non pure upper inodes should use a
pseudo_dev assigned to each unique lower fs and pure upper inodes use the
real upper st_dev.
It is fine for an overlay pure upper inode to use the same st_dev;st_ino
values as the real upper inode, because the content of those two different
filesystem objects is always the same.
In this case, however:
- two filesystems, A and B
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
Non pure upper overlay inode, whose origin is in layer 1 will have the same
st_dev;st_ino values as the real lower inode. This may result with a false
positive results of 'diff' between the real lower and copied up overlay
inode.
Fix this by using the upper st_dev;st_ino values in this case. This breaks
the property of constant st_dev;st_ino across copy up of this case. This
breakage will be fixed by a later patch.
Fixes: 5148626b80 ("ovl: allocate anon bdev per unique lower fs")
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We can allocate maximum fh size and encode into it directly.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Seprate on-disk encoding from in-memory and on-wire resresentation
of overlay file handle.
In-memory and on-wire we only ever pass around pointers to struct
ovl_fh, which encapsulates at offset 3 the on-disk format struct
ovl_fb. struct ovl_fb encapsulates at offset 21 the real file handle.
That makes sure that the real file handle is always 32bit aligned
in-memory when passed down to the underlying filesystem.
On-disk format remains the same and store/load are done into
correctly aligned buffer.
New nfs exported file handles are exported with aligned real fid.
Old nfs file handles are copied to an aligned buffer before being
decoded.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In the past, overlayfs required that lower fs have non null uuid in
order to support nfs export and decode copy up origin file handles.
Commit 9df085f3c9 ("ovl: relax requirement for non null uuid of
lower fs") relaxed this requirement for nfs export support, as long
as uuid (even if null) is unique among all lower fs.
However, said commit unintentionally also relaxed the non null uuid
requirement for decoding copy up origin file handles, regardless of
the unique uuid requirement.
Amend this mistake by disabling decoding of copy up origin file handle
from lower fs with a conflicting uuid.
We still encode copy up origin file handles from those fs, because
file handles like those already exist in the wild and because they
might provide useful information in the future.
There is an unhandled corner case described by Miklos this way:
- two filesystems, A and B, both have null uuid
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
In this case bad_uuid won't be set for B, because the check only
involves the list of lower fs. Hence we'll try to decode a layer 2
origin on layer 1 and fail.
We will deal with this corner case later.
Reported-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/lkml/20191106234301.283006-1-colin.king@canonical.com/
Fixes: 9df085f3c9 ("ovl: relax requirement for non null uuid ...")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Most of the callers of lookup_one_len_unlocked() treat negatives are
ERR_PTR(-ENOENT). Provide a helper that would do just that. Note
that a pinned positive dentry remains positive - it's ->d_inode is
stable, etc.; a pinned _negative_ dentry can become positive at any
point as long as you are not holding its parent at least shared.
So using lookup_one_len_unlocked() needs to be careful;
lookup_positive_unlocked() is safer and that's what the callers
end up open-coding anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When filtering xattr list for reading, presence of trusted xattr
results in a security audit log. However, if there is other content
no errno will be set, and if there isn't, the errno will be -ENODATA
and not -EPERM as is usually associated with a lack of capability.
The check does not block the request to list the xattrs present.
Switch to ns_capable_noaudit to reflect a more appropriate check.
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Cc: linux-security-module@vger.kernel.org
Cc: kernel-team@android.com
Cc: stable@vger.kernel.org # v3.18+
Fixes: a082c6f680 ("ovl: filter trusted xattr for non-admin")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
if ovl_encode_real_fh() fails, no memory was allocated
and the error in the error-valued pointer should be returned.
Fixes: 9b6faee074 ("ovl: check ERR_PTR() return value from ovl_encode_fh()")
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Cc: <stable@vger.kernel.org> # v4.16+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Once upon a time, commit 2cac0c00a6 ("ovl: get exclusive ownership on
upper/work dirs") in v4.13 added some sanity checks on overlayfs layers.
This change caused a docker regression. The root cause was mount leaks
by docker, which as far as I know, still exist.
To mitigate the regression, commit 85fdee1eef ("ovl: fix regression
caused by exclusive upper/work dir protection") in v4.14 turned the
mount errors into warnings for the default index=off configuration.
Recently, commit 146d62e5a5 ("ovl: detect overlapping layers") in
v5.2, re-introduced exclusive upper/work dir checks regardless of
index=off configuration.
This changes the status quo and mount leak related bug reports have
started to re-surface. Restore the status quo to fix the regressions.
To clarify, index=off does NOT relax overlapping layers check for this
ovelayfs mount. index=off only relaxes exclusive upper/work dir checks
with another overlayfs mount.
To cover the part of overlapping layers detection that used the
exclusive upper/work dir checks to detect overlap with self upper/work
dir, add a trap also on the work base dir.
Link: https://github.com/moby/moby/issues/34672
Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/
Link: https://github.com/containers/libpod/issues/3540
Fixes: 146d62e5a5 ("ovl: detect overlapping layers")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Colin Walters <walters@verbum.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update for
5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that
were "easy" to determine by pattern matching. The ones after this are
going to be a bit more difficult and the people on the spdx list will be
discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud, always
nice to see in a diffstat.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXQyQYA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymnGQCghETUBotn1p3hTjY56VEs6dGzpHMAnRT0m+lv
kbsjBGEJpLbMRB2krnaU
=RMcT
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Relax the condition that overlayfs supports nfs export, to require
that i_ino is consistent with st_ino/d_ino.
It is enough to require that st_ino and d_ino are consistent.
This fixes the failure of xfstest generic/504, due to mismatch of
st_ino to inode number in the output of /proc/locks.
Fixes: 12574a9f4c ("ovl: consistent i_ino for non-samefs with xino")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Change first argument to MODULE_PARM_DESC() calls, that each of them
matched the actual module parameter name. The matching results in
changing (the 'parm' section from) the output of `modinfo overlay` from:
parm: ovl_check_copy_up:Obsolete; does nothing
parm: redirect_max:ushort
parm: ovl_redirect_max:Maximum length of absolute redirect xattr value
parm: redirect_dir:bool
parm: ovl_redirect_dir_def:Default to on or off for the redirect_dir feature
parm: redirect_always_follow:bool
parm: ovl_redirect_always_follow:Follow redirects even if redirect_dir feature is turned off
parm: index:bool
parm: ovl_index_def:Default to on or off for the inodes index feature
parm: nfs_export:bool
parm: ovl_nfs_export_def:Default to on or off for the NFS export feature
parm: xino_auto:bool
parm: ovl_xino_auto_def:Auto enable xino feature
parm: metacopy:bool
parm: ovl_metacopy_def:Default to on or off for the metadata only copy up feature
into:
parm: check_copy_up:Obsolete; does nothing
parm: redirect_max:Maximum length of absolute redirect xattr value (ushort)
parm: redirect_dir:Default to on or off for the redirect_dir feature (bool)
parm: redirect_always_follow:Follow redirects even if redirect_dir feature is turned off (bool)
parm: index:Default to on or off for the inodes index feature (bool)
parm: nfs_export:Default to on or off for the NFS export feature (bool)
parm: xino_auto:Auto enable xino feature (bool)
parm: metacopy:Default to on or off for the metadata only copy up feature (bool)
Signed-off-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
gcc gets a bit confused by the logic in ovl_setup_trap() and
can't figure out whether the local 'trap' variable in the caller
was initialized or not:
fs/overlayfs/super.c: In function 'ovl_fill_super':
fs/overlayfs/super.c:1333:4: error: 'trap' may be used uninitialized in this function [-Werror=maybe-uninitialized]
iput(trap);
^~~~~~~~~~
fs/overlayfs/super.c:1312:17: note: 'trap' was declared here
Reword slightly to make it easier for the compiler to understand.
Fixes: 146d62e5a5 ("ovl: detect overlapping layers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
NFS mounts can be disconnected from fs root. Don't fail the overlapping
layer check because of this.
The check is not authoritative anyway, since topology can change during or
after the check.
Reported-by: Antti Antinoja <antti@fennosys.fi>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 146d62e5a5 ("ovl: detect overlapping layers")
The ioctl argument was parsed as the wrong type.
Fixes: b21d9c435f ("ovl: support the FS_IOC_FS[SG]ETXATTR ioctls")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlapping overlay layers are not supported and can cause unexpected
behavior, but overlayfs does not currently check or warn about these
configurations.
User is not supposed to specify the same directory for upper and
lower dirs or for different lower layers and user is not supposed to
specify directories that are descendants of each other for overlay
layers, but that is exactly what this zysbot repro did:
https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000
Moving layer root directories into other layers while overlayfs
is mounted could also result in unexpected behavior.
This commit places "traps" in the overlay inode hash table.
Those traps are dummy overlay inodes that are hashed by the layers
root inodes.
On mount, the hash table trap entries are used to verify that overlay
layers are not overlapping. While at it, we also verify that overlay
layers are not overlapping with directories "in-use" by other overlay
instances as upperdir/workdir.
On lookup, the trap entries are used to verify that overlay layers
root inodes have not been moved into other layers after mount.
Some examples:
$ ./run --ov --samefs -s
...
( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt
mount -o bind base/lower lower
mount -o bind base/upper upper
mount -t overlay none mnt ...
-o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w)
$ umount mnt
$ mount -t overlay none mnt ...
-o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w
[ 94.434900] overlayfs: overlapping upperdir path
mount: mount overlay on mnt failed: Too many levels of symbolic links
$ mount -t overlay none mnt ...
-o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w
[ 151.350132] overlayfs: conflicting lowerdir path
mount: none is already mounted or mnt busy
$ mount -t overlay none mnt ...
-o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w
[ 201.205045] overlayfs: overlapping lowerdir path
mount: mount overlay on mnt failed: Too many levels of symbolic links
$ mount -t overlay none mnt ...
-o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w
$ mv base/upper/0/ base/lower/
$ find mnt/0
mnt/0
mnt/0/w
find: 'mnt/0/w/work': Too many levels of symbolic links
find: 'mnt/0/u': Too many levels of symbolic links
Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
They are the extended version of FS_IOC_FS[SG]ETFLAGS ioctls.
xfs_io -c "chattr <flags>" uses the new ioctls for setting flags.
This used to work in kernel pre v4.19, before stacked file ops
introduced the ovl_ioctl whitelist.
Reported-by: Dave Chinner <david@fromorbit.com>
Fixes: d1d04ef857 ("ovl: stack file ops")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXNpu6gAKCRDh3BK/laaZ
PNYnAQCLMJBZp9AVKU+5onOGKLmgUfnbKZhWJYICW6DVKobo6AEA4aXBIk5TIDiu
+a3Ny0nAutdpHcRkbi8jJty91BeJgQg=
=iLSD
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
"Just bug fixes in this small update"
* tag 'ovl-update-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: relax WARN_ON() for overlapping layers use case
ovl: check the capability before cred overridden
ovl: do not generate duplicate fsnotify events for "fake" path
ovl: support stacked SEEK_HOLE/SEEK_DATA
ovl: fix missing upper fs freeze protection on copy up for ioctl
This nasty little syzbot repro:
https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000
Creates overlay mounts where the same directory is both in upper and lower
layers. Simplified example:
mkdir foo work
mount -t overlay none foo -o"lowerdir=.,upperdir=foo,workdir=work"
The repro runs several threads in parallel that attempt to chdir into foo
and attempt to symlink/rename/exec/mkdir the file bar.
The repro hits a WARN_ON() I placed in ovl_instantiate(), which suggests
that an overlay inode already exists in cache and is hashed by the pointer
of the real upper dentry that ovl_create_real() has just created. At the
point of the WARN_ON(), for overlay dir inode lock is held and upper dir
inode lock, so at first, I did not see how this was possible.
On a closer look, I see that after ovl_create_real(), because of the
overlapping upper and lower layers, a lookup by another thread can find the
file foo/bar that was just created in upper layer, at overlay path
foo/foo/bar and hash the an overlay inode with the new real dentry as lower
dentry. This is possible because the overlay directory foo/foo is not
locked and the upper dentry foo/bar is in dcache, so ovl_lookup() can find
it without taking upper dir inode shared lock.
Overlapping layers is considered a wrong setup which would result in
unexpected behavior, but it shouldn't crash the kernel and it shouldn't
trigger WARN_ON() either, so relax this WARN_ON() and leave a pr_warn()
instead to cover all cases of failure to get an overlay inode.
The error returned from failure to insert new inode to cache with
inode_insert5() was changed to -EEXIST, to distinguish from the error
-ENOMEM returned on failure to get/allocate inode with iget5_locked().
Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Fixes: 01b39dcc95 ("ovl: use inode_insert5() to hash a newly...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull misc dcache updates from Al Viro:
"Most of this pile is putting name length into struct name_snapshot and
making use of it.
The beginning of this series ("ovl_lookup_real_one(): don't bother
with strlen()") ought to have been split in two (separate switch of
name_snapshot to struct qstr from overlayfs reaping the trivial
benefits of that), but I wanted to avoid a rebase - by the time I'd
spotted that it was (a) in -next and (b) close to 5.1-final ;-/"
* 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
audit_compare_dname_path(): switch to const struct qstr *
audit_update_watch(): switch to const struct qstr *
inotify_handle_event(): don't bother with strlen()
fsnotify: switch send_to_group() and ->handle_event to const struct qstr *
fsnotify(): switch to passing const struct qstr * for file_name
switch fsnotify_move() to passing const struct qstr * for old_name
ovl_lookup_real_one(): don't bother with strlen()
sysv: bury the broken "quietly truncate the long filenames" logics
nsfs: unobfuscate
unexport d_alloc_pseudo()
We found that it return success when we set IMMUTABLE_FL flag to a file in
docker even though the docker didn't have the capability
CAP_LINUX_IMMUTABLE.
The commit d1d04ef857 ("ovl: stack file ops") and dab5ca8fd9 ("ovl: add
lsattr/chattr support") implemented chattr operations on a regular overlay
file. ovl_real_ioctl() overridden the current process's subjective
credentials with ofs->creator_cred which have the capability
CAP_LINUX_IMMUTABLE so that it will return success in
vfs_ioctl()->cap_capable().
Fix this by checking the capability before cred overridden. And here we
only care about APPEND_FL and IMMUTABLE_FL, so get these information from
inode.
[SzM: move check and call to underlying fs inside inode locked region to
prevent two such calls from racing with each other]
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlayfs "fake" path is used for stacked file operations on underlying
files. Operations on files with "fake" path must not generate fsnotify
events with path data, because those events have already been generated at
overlayfs layer and because the reported event->fd for fanotify marks on
underlying inode/filesystem will have the wrong path (the overlayfs path).
Link: https://lore.kernel.org/linux-fsdevel/20190423065024.12695-1-jencce.kernel@gmail.com/
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Fixes: d1d04ef857 ("ovl: stack file ops")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlay file f_pos is the master copy that is preserved
through copy up and modified on read/write, but only real
fs knows how to SEEK_HOLE/SEEK_DATA and real fs may impose
limitations that are more strict than ->s_maxbytes for specific
files, so we use the real file to perform seeks.
We do not call real fs for SEEK_CUR:0 query and for SEEK_SET:0
requests.
Fixes: d1d04ef857 ("ovl: stack file ops")
Reported-by: Eddie Horng <eddiehorng.tw@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Generalize the helper ovl_open_maybe_copy_up() and use it to copy up file
with data before FS_IOC_SETFLAGS ioctl.
The FS_IOC_SETFLAGS ioctl is a bit of an odd ball in vfs, which probably
caused the confusion. File may be open O_RDONLY, but ioctl modifies the
file. VFS does not call mnt_want_write_file() nor lock inode mutex, but
fs-specific code for FS_IOC_SETFLAGS does. So ovl_ioctl() calls
mnt_want_write_file() for the overlay file, and fs-specific code calls
mnt_want_write_file() for upper fs file, but there was no call for
ovl_want_write() for copy up duration which prevents overlayfs from copying
up on a frozen upper fs.
Fixes: dab5ca8fd9 ("ovl: add lsattr/chattr support")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If a file has been copied up metadata only, and later data is copied up,
upper loses any security.capability xattr it has (underlying filesystem
clears it as upon file write).
From a user's point of view, this is just a file copy-up and that should
not result in losing security.capability xattr. Hence, before data copy
up, save security.capability xattr (if any) and restore it on upper after
data copy up is complete.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Fixes: 0c28887493 ("ovl: A new xattr OVL_XATTR_METACOPY for file on upper")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If a file with capability set (and hence security.capability xattr) is
written kernel clears security.capability xattr. For overlay, during file
copy up if xattrs are copied up first and then data is, copied up. This
means data copy up will result in clearing of security.capability xattr
file on lower has. And this can result into surprises. If a lower file has
CAP_SETUID, then it should not be cleared over copy up (if nothing was
actually written to file).
This also creates problems with chown logic where it first copies up file
and then tries to clear setuid bit. But by that time security.capability
xattr is already gone (due to data copy up), and caller gets -ENODATA.
This has been reported by Giuseppe here.
https://github.com/containers/libpod/issues/2015#issuecomment-447824842
Fix this by copying up data first and then metadta. This is a regression
which has been introduced by my commit as part of metadata only copy up
patches.
TODO: There will be some corner cases where a file is copied up metadata
only and later data copy up happens and that will clear security.capability
xattr. Something needs to be done about that too.
Fixes: bd64e57586 ("ovl: During copy up, first copy up metadata and then data")
Cc: <stable@vger.kernel.org> # v4.19+
Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This reverts commit 007ea44892.
The commit broke some selinux-testsuite cases, and it looks like there's no
straightforward fix keeping the direction of this patch, so revert for now.
The original patch was trying to fix the consistency of permission checks, and
not an observed bug. So reverting should be safe.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When decoding a lower file handle, we first call ovl_check_origin_fh()
with connected=false to get any real lower dentry for overlay inode
cache lookup.
If the real dentry is a disconnected dir dentry, ovl_check_origin_fh()
is called again with connected=true to get a connected real dentry
and find the lower layer the real dentry belongs to.
If the first call returned a connected real dentry, we use it to
lookup an overlay connected dentry, but the first ovl_check_origin_fh()
call with connected=false did not check that the found dentry is under
the root of the layer (see ovl_acceptable()), it only checked that
the found dentry super block matches the uuid of the lower file handle.
In case there are multiple lower layers on the same fs and the found
dentry is not from the top most lower layer, using the layer index
returned from the first ovl_check_origin_fh() is wrong and we end
up failing to decode the file handle.
Fix this by always calling ovl_check_origin_fh() with connected=true
if we got a directory dentry in the first call.
Fixes: 8b58924ad5 ("ovl: lookup in inode cache first when decoding...")
Cc: <stable@vger.kernel.org> # v4.17
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Theodore Ts'o reported a v4.19 regression with docker-dropbox:
https://marc.info/?l=linux-fsdevel&m=154070089431116&w=2
"I was rebuilding my dropbox Docker container, and it failed in 4.19
with the following error:
...
dpkg: error: error creating new backup file \
'/var/lib/dpkg/status-old': Invalid cross-device link"
The problem did not reproduce with metacopy feature disabled.
The error was caused by insufficient credentials to set
"trusted.overlay.redirect" xattr on link of a metacopy file.
Reproducer:
echo Y > /sys/module/overlay/parameters/redirect_dir
echo Y > /sys/module/overlay/parameters/metacopy
cd /tmp
mkdir l u w m
chmod 777 l u
touch l/foo
ln l/foo l/link
chmod 666 l/foo
mount -t overlay none -olowerdir=l,upperdir=u,workdir=w m
su fsgqa
ln m/foo m/bar
[ 21.455823] overlayfs: failed to set redirect (-1)
ln: failed to create hard link 'm/bar' => 'm/foo':\
Invalid cross-device link
Reported-by: Theodore Y. Ts'o <tytso@mit.edu>
Reported-by: Maciej Zięba <maciekz82@gmail.com>
Fixes: 4120fe64dc ("ovl: Set redirect on upper inode when it is linked")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Rework the vfs_clone_file_range and vfs_dedupe_file_range infrastructure to use
a common .remap_file_range method and supply generic bounds and sanity checking
functions that are shared with the data write path. The current VFS
infrastructure has problems with rlimit, LFS file sizes, file time stamps,
maximum filesystem file sizes, stripping setuid bits, etc and so they are
addressed in these commits.
We also introduce the ability for the ->remap_file_range methods to return short
clones so that clones for vfs_copy_file_range() don't get rejected if the entire
range can't be cloned. It also allows filesystems to sliently skip deduplication
of partial EOF blocks if they are not capable of doing so without requiring
errors to be thrown to userspace.
All existing filesystems are converted to user the new .remap_file_range method,
and both XFS and ocfs2 are modified to make use of the new generic checking
infrastructure.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CE/A
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull vfs dedup fixes from Dave Chinner:
"This reworks the vfs data cloning infrastructure.
We discovered many issues with these interfaces late in the 4.19 cycle
- the worst of them (data corruption, setuid stripping) were fixed for
XFS in 4.19-rc8, but a larger rework of the infrastructure fixing all
the problems was needed. That rework is the contents of this pull
request.
Rework the vfs_clone_file_range and vfs_dedupe_file_range
infrastructure to use a common .remap_file_range method and supply
generic bounds and sanity checking functions that are shared with the
data write path. The current VFS infrastructure has problems with
rlimit, LFS file sizes, file time stamps, maximum filesystem file
sizes, stripping setuid bits, etc and so they are addressed in these
commits.
We also introduce the ability for the ->remap_file_range methods to
return short clones so that clones for vfs_copy_file_range() don't get
rejected if the entire range can't be cloned. It also allows
filesystems to sliently skip deduplication of partial EOF blocks if
they are not capable of doing so without requiring errors to be thrown
to userspace.
Existing filesystems are converted to user the new remap_file_range
method, and both XFS and ocfs2 are modified to make use of the new
generic checking infrastructure"
* tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits)
xfs: remove [cm]time update from reflink calls
xfs: remove xfs_reflink_remap_range
xfs: remove redundant remap partial EOF block checks
xfs: support returning partial reflink results
xfs: clean up xfs_reflink_remap_blocks call site
xfs: fix pagecache truncation prior to reflink
ocfs2: remove ocfs2_reflink_remap_range
ocfs2: support partial clone range and dedupe range
ocfs2: fix pagecache truncation prior to reflink
ocfs2: truncate page cache for clone destination file before remapping
vfs: clean up generic_remap_file_range_prep return value
vfs: hide file range comparison function
vfs: enable remap callers that can handle short operations
vfs: plumb remap flags through the vfs dedupe functions
vfs: plumb remap flags through the vfs clone functions
vfs: make remap_file_range functions take and return bytes completed
vfs: remap helper should update destination inode metadata
vfs: pass remap flags to generic_remap_checks
vfs: pass remap flags to generic_remap_file_range_prep
vfs: combine the clone and dedupe into a single remap_file_range
...
Current behavior is to automatically disable metacopy if redirect_dir is
not enabled and proceed with the mount.
If "metacopy=on" mount option was given, then this behavior can confuse the
user: no mount failure, yet metacopy is disabled.
This patch makes metacopy=on imply redirect_dir=on.
The converse is also true: turning off full redirect with redirect_dir=
{off|follow|nofollow} will disable metacopy.
If both metacopy=on and redirect_dir={off|follow|nofollow} is specified,
then mount will fail, since there's no way to correctly resolve the
conflict.
Reported-by: Daniel Walsh <dwalsh@redhat.com>
Fixes: d5791044d2 ("ovl: Provide a mount option metacopy=on/off...")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Kaixuxia repors that it's possible to crash overlayfs by removing the
whiteout on the upper layer before creating a directory over it. This is a
reproducer:
mkdir lower upper work merge
touch lower/file
mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merge
rm merge/file
ls -al merge/file
rm upper/file
ls -al merge/
mkdir merge/file
Before commencing with a vfs_rename(..., RENAME_EXCHANGE) verify that the
lookup of "upper" is positive and is a whiteout, and return ESTALE
otherwise.
Reported by: kaixuxia <xiakaixu1987@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: e9be9d5e76 ("overlay filesystem")
Cc: <stable@vger.kernel.org> # v3.18
Plumb a remap_flags argument through the vfs_dedupe_file_range_one
functions so that dedupe can take advantage of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Plumb a remap_flags argument through the {do,vfs}_clone_file_range
functions so that clone can take advantage of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Change the remap_file_range functions to take a number of bytes to
operate upon and return the number of bytes they operated on. This is a
requirement for allowing fs implementations to return short clone/dedupe
results to the user, which will enable us to obey resource limits in a
graceful manner.
A subsequent patch will enable copy_file_range to signal to the
->clone_file_range implementation that it can handle a short length,
which will be returned in the function's return value. For now the
short return is not implemented anywhere so the behavior won't change --
either copy_file_range manages to clone the entire range or it tries an
alternative.
Neither clone ioctl can take advantage of this, alas.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Combine the clone_file_range and dedupe_file_range operations into a
single remap_file_range file operation dispatch since they're
fundamentally the same operation. The differences between the two can
be made in the prep functions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There is no functional change but it seems better to get size by calling
posix_acl_xattr_size() instead of calling posix_acl_to_xattr() with
NULL buffer argument. Additionally, remove unnecessary assignments.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
It just makes the interface strange without adding any significant value.
The only case where locked is false and return value is 0 is in
ovl_rename() when new is negative, so handle that case explicitly in
ovl_rename().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We use uuid to associate an overlay lower file handle with a lower layer,
so we can accept lower fs with null uuid as long as all lower layers with
null uuid are on the same fs.
This change allows enabling index and nfs_export features for the setup of
single lower fs of type squashfs - squashfs supports file handles, but has
a null uuid. This change also allows enabling index and nfs_export features
for nested overlayfs, where the lower overlay has nfs_export enabled.
Enabling the index feature with single lower squashfs fixes the
unionmount-testsuite test:
./run --ov --squashfs --verify
As a by-product, if, like the lower squashfs, upper fs also uses the
generic export_encode_fh() implementation to export 32bit inode file
handles (e.g. ext4), then the xino_auto config/module/mount option will
enable unique overlay inode numbers.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Now that the workdir and tmpfile copy up modes have been untagled, the
functions become simple enough that the helpers can be folded into the
callers.
Add new helpers where there is any duplication remaining: preparing creds
for creating the object.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In an attempt to dedup ~100 LOC, we ended up creating a tangled call chain,
whose branches merge and diverge in several points according to the
immutable c->tmpfile copy up mode.
This call chain was hard to analyse for locking correctness because the
locking requirements for the c->tmpfile flow were very different from the
locking requirements for the !c->tmpfile flow (i.e. directory vs. regulare
file copy up).
Split the copy up helpers of the c->tmpfile flow from those of the
!c->tmpfile (i.e. workdir) flow and remove the c->tmpfile mode from copy up
context.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Make permission checking more consistent:
- special files don't need any access check on underling fs
- exec permission check doesn't need to be performed on underlying fs
Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
linking a non-copied-up file into a non-copied-up parent results in a
nested call to mutex_lock_interruptible(&oi->lock). Fix this by copying up
target parent before ovl_nlink_start(), same as done in ovl_rename().
~/unionmount-testsuite$ ./run --ov -s
~/unionmount-testsuite$ ln /mnt/a/foo100 /mnt/a/dir100/
WARNING: possible recursive locking detected
--------------------------------------------
ln/1545 is trying to acquire lock:
00000000bcce7c4c (&ovl_i_lock_key[depth]){+.+.}, at:
ovl_copy_up_start+0x28/0x7d
but task is already holding lock:
0000000026d73d5b (&ovl_i_lock_key[depth]){+.+.}, at:
ovl_nlink_start+0x3c/0xc1
[SzM: this seems to be a false positive, but doing the copy-up first is
harmless and removes the lockdep splat]
Reported-by: syzbot+3ef5c0d1a5cb0b21e6be@syzkaller.appspotmail.com
Fixes: 5f8415d6b8 ("ovl: persistent overlay inode nlink for...")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If security_inode_copy_up() fails, it should not set new_creds, so no need
for the cleanup (which would've Oops-ed anyway, due to old_creds being
NULL).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We hit a BUG on kfree of an ERR_PTR()...
Reported-by: syzbot+ff03fe05c717b82502d0@syzkaller.appspotmail.com
Fixes: 8b88a2e640 ("ovl: verify upper root dir matches lower root dir")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Format has a typo: it was meant to be "%.*s", not "%*s". But at some point
callers grew nonprintable values as well, so use "%*pE" instead with a
maximized length.
Reported-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 3a1e819b4e ("ovl: store file handle of lower inode on copy up")
Cc: <stable@vger.kernel.org> # v4.12
Fixes the following sparse warning:
fs/overlayfs/inode.c:507:39: warning:
symbol 'ovl_aops' was not declared. Should it be static?
Fixes: 5b910bd615 ("ovl: fix GPF in swapfile_activate of file from overlayfs over xfs")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit 031a072a0b ("vfs: call vfs_clone_file_range() under freeze
protection") created a wrapper do_clone_file_range() around
vfs_clone_file_range() moving the freeze protection to former, so
overlayfs could call the latter.
The more common vfs practice is to call do_xxx helpers from vfs_xxx
helpers, where freeze protecction is taken in the vfs_xxx helper, so
this anomality could be a source of confusion.
It seems that commit 8ede205541 ("ovl: add reflink/copyfile/dedup
support") may have fallen a victim to this confusion -
ovl_clone_file_range() calls the vfs_clone_file_range() helper in the
hope of getting freeze protection on upper fs, but in fact results in
overlayfs allowing to bypass upper fs freeze protection.
Swap the names of the two helpers to conform to common vfs practice
and call the correct helpers from overlayfs and nfsd.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested by doing clone on overlayfs while upper xfs+reflink is frozen:
xfs_io -f /ovl/y
fsfreeze -f /xfs
xfs_io> reflink /ovl/x
Before the fix xfs_io enters xfs_reflink_remap_range() and blocks
in xfs_trans_alloc(). After the fix, xfs_io blocks outside xfs code
in ovl_clone_file_range().
Fixes: 8ede205541 ("ovl: add reflink/copyfile/dedup support")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested by re-writing to an open overlayfs file while upper ext4 is frozen:
xfs_io -f /ovl/x
xfs_io> pwrite 0 4096
fsfreeze -f /ext4
xfs_io> pwrite 0 4096
WARNING: CPU: 0 PID: 1492 at fs/ext4/ext4_jbd2.c:53 \
ext4_journal_check_start+0x48/0x82
After the fix, the second write blocks in ovl_write_iter() and avoids
hitting WARN_ON(sb->s_writers.frozen == SB_FREEZE_COMPLETE) in
ext4_journal_check_start().
Fixes: 2a92e07edc ("ovl: add ovl_write_iter()")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The memory leak was detected by kmemleak when running xfstests
overlay/051,053
Fixes: caf70cb2ba ("ovl: cleanup orphan index entries")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_free_fs() dereferences ofs->workbasedir and ofs->upper_mnt in cases when
those might not have been initialized yet.
Fix the initialization order for these fields.
Reported-by: syzbot+c75f181dc8429d2eb887@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # v4.15
Fixes: 95e6d4177c ("ovl: grab reference to workbasedir early")
Fixes: a9075cdb46 ("ovl: factor out ovl_free_fs() helper")
Since overlayfs implements stacked file operations, the underlying
filesystems are not supposed to be exposed to the overlayfs file,
whose f_inode is an overlayfs inode.
Assigning an overlayfs file to swap_file results in an attempt of xfs
code to dereference an xfs_inode struct from an ovl_inode pointer:
CPU: 0 PID: 2462 Comm: swapon Not tainted
4.18.0-xfstests-12721-g33e17876ea4e #3402
RIP: 0010:xfs_find_bdev_for_inode+0x23/0x2f
Call Trace:
xfs_iomap_swapfile_activate+0x1f/0x43
__se_sys_swapon+0xb1a/0xee9
Fix this by not assigning the real inode mapping to f_mapping, which
will cause swapon() to return an error (-EINVAL). Although it makes
sense not to allow setting swpafile on an overlayfs file, some users
may depend on it, so we may need to fix this up in the future.
Keeping f_mapping pointing to overlay inode mapping will cause O_DIRECT
open to fail. Fix this by installing ovl_aops with noop_direct_IO in
overlay inode mapping.
Keeping f_mapping pointing to overlay inode mapping will cause other
a_ops related operations to fail (e.g. readahead()). Those will be
fixed by follow up patches.
Suggested-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: f7c72396d0 ("ovl: add O_DIRECT support")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
...otherwise there will be list corruption due to inode_sb_list_add() being
called for inode already on the sb list.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: e950564b97 ("vfs: don't evict uninitialized inode")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All the bits are in patches before this. So it is time to enable the
metadata only copy up feature.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_copy_up() by default will only do metadata only copy up (if enabled).
That means when ovl_real_ioctl() calls ovl_real_file(), it will still get
the lower file (as ovl_real_file() opens data file and not metacopy). And
that means "chattr +i" will end up modifying lower inode.
There seem to be two ways to solve this.
A. Open metacopy file in ovl_real_ioctl() and do operations on that
B. Force full copy up when FS_IOC_SETFLAGS is called.
I am resorting to option B for now as it feels little safer option. If
there are performance issues due to this, we can revisit it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
truncate should copy up full file (and not do metacopy only), otherwise it
will be broken. For example, use truncate to increase size of a file so
that any read beyong existing size will return null bytes. If we don't
copy up full file, then we end up opening lower file and read from it only
reads upto the old size (and not new size after truncate). Hence to avoid
such situations, copy up data as well when file size changes.
So far it was being done by d_real(O_WRONLY) call in truncate() path. Now
that patch has been reverted. So force full copy up in ovl_setattr() if
size of file is changing.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now we seem to check redirect only if upperdentry is found. But it
is possible that there is no upperdentry but later we found an index.
We need to check redirect on index as well and set it in
ovl_inode->redirect. Otherwise link code can assume that dentry does not
have redirect and place a new one which breaks things. In my testing
overlay/033 test started failing in xfstests. Following are the details.
For example do following.
$ mkdir lower upper work merged
- Make lower dir with 4 links.
$ echo "foo" > lower/l0.txt
$ ln lower/l0.txt lower/l1.txt
$ ln lower/l0.txt lower/l2.txt
$ ln lower/l0.txt lower/l3.txt
- Mount with index on and metacopy on.
$ mount -t overlay -o lowerdir=lower,upperdir=upper,workdir=work,\
index=on,metacopy=on none merged
- Link lower
$ ln merged/l0.txt merged/l4.txt
(This will metadata copy up of l0.txt and put an absolute redirect
/l0.txt)
$ echo 2 > /proc/sys/vm/drop/caches
$ ls merged/l1.txt
(Now l1.txt will be looked up. There is no upper dentry but there is
lower dentry and index will be found. We don't check for redirect on
index, hence ovl_inode->redirect will be NULL.)
- Link Upper
$ ln merged/l4.txt merged/l5.txt
(Lookup of l4.txt will use inode from l1.txt lookup which is still in
cache. It has ovl_inode->redirect NULL, hence link will put a new
redirect and replace /l0.txt with /l4.txt
- Drop caches.
echo 2 > /proc/sys/vm/drop_caches
- List l1.txt and it returns -ESTALE
$ ls merged/l0.txt
(It returns stale because, we found a metacopy of l0.txt in upper and it
has redirect l4.txt but there is no file named l4.txt in lower layer.
So lower data copy is not found and -ESTALE is returned.)
So problem here is that we did not process redirect on index. Check
redirect on index as well and then problem is fixed.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When we create a hardlink to a metacopy upper file, first the redirect on
that inode. Path based lookup will not work with newly created link and
redirect will solve that issue.
Also use absolute redirect as two hardlinks could be in different
directores and relative redirect will not work.
I have not put any additional locking around setting redirects while
introducing redirects for non-dir files. For now it feels like existing
locking is sufficient. If that's not the case, we will have add more
locking. Following is my rationale about why do I think current locking
seems ok.
Basic problem for non-dir files is that more than on dentry could be
pointing to same inode and in theory only relying on dentry based locks
(d->d_lock) did not seem sufficient.
We set redirect upon rename and upon link creation. In both the paths for
non-dir file, VFS locks both source and target inodes (->i_rwsem). That
means vfs rename and link operations on same source and target can't he
happening in parallel (Even if there are multiple dentries pointing to same
inode). So that probably means that at a time on an inode, only one call
of ovl_set_redirect() could be working and we don't need additional locking
in ovl_set_redirect().
ovl_inode->redirect is initialized only when inode is created new. That
means it should not race with any other path and setting
ovl_inode->redirect should be fine.
Reading of ovl_inode->redirect happens in ovl_get_redirect() path. And
this called only in ovl_set_redirect(). And ovl_set_redirect() already
seemed to be protected using ->i_rwsem. That means ovl_set_redirect() and
ovl_get_redirect() on source/target inode should not make progress in
parallel and is mutually exclusive. Hence no additional locking required.
Now, only case where ovl_set_redirect() and ovl_get_redirect() could race
seems to be case of absolute redirects where ovl_get_redirect() has to
travel up the tree. In that case we already take d->d_lock and that should
be sufficient as directories will not have multiple dentries pointing to
same inode.
So given VFS locking and current usage of redirect, current locking around
redirect seems to be ok for non-dir as well. Once we have the logic to
remove redirect when metacopy file gets copied up, then we probably will
need additional locking.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Set redirect on metacopy files upon rename. This will help find data
dentry in lower dirs.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If a dentry has copy up origin, we set flag OVL_PATH_ORIGIN. So far this
decision was easy that we had to check only for oe->numlower and if it is
non-zero, we knew there is copy up origin. (For non-dir we installed
origin dentry in lowerstack[0]).
But we don't create ORGIN xattr for broken hardlinks (index=off). And with
metacopy feature it is possible that we will install lowerstack[0] but
ORIGIN xattr is not there. It is data dentry of upper metacopy dentry
which has been found using regular name based lookup or using REDIRECT. So
with addition of this new case, just presence of oe->numlower is not
sufficient to guarantee that ORIGIN xattr is present.
So to differentiate between two cases, look at OVL_CONST_INO flag. If this
flag is set and upperdentry is there, that means it can be marked as type
ORIGIN. OVL_CONST_INO is not set if lower hardlink is broken or will be
broken over copy up.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add an ovl_inode flag OVL_CONST_INO. This flag signifies if inode number
will remain constant over copy up or not. This flag does not get updated
over copy up and remains unmodifed after setting once.
Next patch in the series will make use of this flag. It will basically
figure out if dentry is of type ORIGIN or not. And this can be derived by
this flag.
ORIGIN = (upperdentry && ovl_test_flag(OVL_CONST_INO, inode)).
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now OVL_PATH_MERGE is used only for merged directories. But
conceptually, a metacopy dentry (backed by a lower data dentry) is a merged
entity as well.
So mark metacopy dentries as OVL_PATH_MERGE and ovl_rename() makes use of
this property later to set redirect on a metacopy file.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now we rely on path based lookup for data origin of metacopy upper.
This will work only if upper has not been renamed. We solved this problem
already for merged directories using redirect. Use same logic for metacopy
files.
This patch just goes on to check redirects for metacopy files.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move some directory related code in else block. This is pure code
reorganization and no functionality change.
Next patch enables redirect processing on metacopy files and needs this
change. By keeping non-functional changes in a separate patch, next patch
looks much smaller and cleaner.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Metacopy dentry/inode is internal to overlay and is never exposed outside
of it. Exception is metacopy upper file used for fsync(). Modify d_real()
to look for dentries/inode which have data, but also allow matching upper
inode without data for the fsync case.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_open() should open file which contains data and not open metacopy
inode. With the introduction of metacopy inodes, with current
implementaion we will end up opening metacopy inode as well.
But there can be certain circumstances like ovl_fsync() where we want to
allow opening a metacopy inode instead.
Hence, change ovl_open_realfile() and and add extra parameter which
specifies whether to allow opening metacopy inode or not. If this
parameter is false, we look for data inode and open that.
This should allow covering both the cases.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add an helper to retrieve real data inode associated with overlay inode.
This helper will ignore all metacopy inodes and will return only the real
inode which has data.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now ovl_inode stores inode pointer for lower inode. This helps with
quickly getting lower inode given overlay inode (ovl_inode_lower()).
Now with metadata only copy-up, we can have metacopy inode in middle layer
as well and inode containing data can be different from ->lower. I need to
be able to open the real file in ovl_open_realfile() and for that I need to
quickly find the lower data inode.
Hence store lower data inode also in ovl_inode. Also provide an helper
ovl_inode_lowerdata() to access this field.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If an inode has been copied up metadata only, then we need to query the
number of blocks from lower and fill up the stat->st_blocks.
We need to be careful about races where we are doing stat on one cpu and
data copy up is taking place on other cpu. We want to return
stat->st_blocks either from lower or stable upper and not something in
between. Hence, ovl_has_upperdata() is called first to figure out whether
block reporting will take place from lower or upper.
We now support metacopy dentries in middle layer. That means number of
blocks reporting needs to come from lowest data dentry and this could be
different from lower dentry. Hence we end up making a separate
vfs_getxattr() call for metacopy dentries to get number of blocks.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Now we have the notion of data dentry and metacopy dentry.
ovl_dentry_lower() will return uppermost lower dentry, but it could be
either data or metacopy dentry. Now we support metacopy dentries in lower
layers so it is possible that lowerstack[0] is metacopy dentry while
lowerstack[1] is actual data dentry.
So add an helper which returns lowest most dentry which is supposed to be
data dentry.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
So far lower could not be a meta inode. So whenever it was time to copy up
data of a meta inode, we could copy it up from top most lower dentry.
But now lower itself can be a metacopy inode. That means data copy up
needs to take place from a data inode in metacopy inode chain. Find lower
data inode in the chain and use that for data copy up.
Introduced a helper called ovl_path_lowerdata() to find the lower data
inode chain.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch modifies ovl_lookup() and friends to lookup metacopy dentries.
It also allows for presence of metacopy dentries in lower layer.
During lookup, check for presence of OVL_XATTR_METACOPY and if not present,
set OVL_UPPERDATA bit in flags.
We don't support metacopy feature with nfs_export. So in nfs_export code,
we set OVL_UPPERDATA flag set unconditionally if upper inode exists.
Do not follow metacopy origin if we find a metacopy only inode and metacopy
feature is not enabled for that mount. Like redirect, this can have
security implications where an attacker could hand craft upper and try to
gain access to file on lower which it should not have to begin with.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now we use goto out_nomem which assumes error code is -ENOMEM. But
there are other errors returned like -ESTALE as well. So instead of
out_nomem, use out_err which will do ERR_PTR(err). That way one can put
error code in err and jump to out_err.
This just code reorganization and no change of functionality.
I am about to add more code and this organization helps laying more code
and error paths on top of it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Now we will have the capability to have upper inodes which might be only
metadata copy up and data is still on lower inode. So add a new xattr
OVL_XATTR_METACOPY to distinguish between two cases.
Presence of OVL_XATTR_METACOPY reflects that file has been copied up
metadata only and and data will be copied up later from lower origin. So
this xattr is set when a metadata copy takes place and cleared when data
copy takes place.
We also use a bit in ovl_inode->flags to cache OVL_UPPERDATA which reflects
whether ovl inode has data or not (as opposed to metadata only copy up).
If a file is copied up metadata only and later when same file is opened for
WRITE, then data copy up takes place. We copy up data, remove METACOPY
xattr and then set the UPPERDATA flag in ovl_inode->flags. While all these
operations happen with oi->lock held, read side of oi->flags can be
lockless. That is another thread on another cpu can check if UPPERDATA
flag is set or not.
So this gives us an ordering requirement w.r.t UPPERDATA flag. That is, if
another cpu sees UPPERDATA flag set, then it should be guaranteed that
effects of data copy up and remove xattr operations are also visible.
For example.
CPU1 CPU2
ovl_open() acquire(oi->lock)
ovl_open_maybe_copy_up() ovl_copy_up_data()
open_open_need_copy_up() vfs_removexattr()
ovl_already_copied_up()
ovl_dentry_needs_data_copy_up() ovl_set_flag(OVL_UPPERDATA)
ovl_test_flag(OVL_UPPERDATA) release(oi->lock)
Say CPU2 is copying up data and in the end sets UPPERDATA flag. But if
CPU1 perceives the effects of setting UPPERDATA flag but not the effects of
preceding operations (ex. upper that is not fully copied up), it will be a
problem.
Hence this patch introduces smp_wmb() on setting UPPERDATA flag operation
and smp_rmb() on UPPERDATA flag test operation.
May be some other lock or barrier is already covering it. But I am not sure
what that is and is it obvious enough that we will not break it in future.
So hence trying to be safe here and introducing barriers explicitly for
UPPERDATA flag/bit.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There are couple of places where we need to know if file is already copied
up (in lockless manner). Right now its open coded and there are only two
conditions to check. Soon this patch series will introduce another
condition to check and Amir wants to introduce one more. So introduce a
helper instead to check this so that code is easier to read.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If it makes sense to copy up only metadata during copy up, do it. This is
done for regular files which are not opened for WRITE.
Right now ->metacopy is set to 0 always. Last patch in the series will
remove the hard coded statement and enable metacopy feature.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Just a little re-ordering of code. This helps with next patch where after
copying up metadata, we skip data copying step, if needed.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
By default metadata only copy up is disabled. Provide a mount option so
that users can choose one way or other.
Also provide a kernel config and module option to enable/disable metacopy
feature.
metacopy feature requires redirect_dir=on when upper is present.
Otherwise, it requires redirect_dir=follow atleast.
As of now, metacopy does not work with nfs_export=on. So if both
metacopy=on and nfs_export=on then nfs_export is disabled.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now two copy up helpers are in inode.c. Amir suggested it might be
better to move these to copy_up.c.
There will one more related function which will come in later patch.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_inode->redirect is an inode property and should be initialized in
ovl_get_inode() only when we are adding a new inode to cache. If inode is
already in cache, it is already initialized and we should not be touching
ovl_inode->redirect field.
As of now this is not a problem as redirects are used only for directories
which don't share inode. But soon I want to use redirects for regular
files also and there it can become an issue.
Hence, move ->redirect initialization in ovl_get_inode().
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This was provided for debugging the ro/rw inconsistecy. The inconsitency
is now gone so this option is obsolete.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Opening regular files on overlayfs is now handled via ovl_open(). Remove
the now unused "open_flags" argument from d_op->d_real() and the d_real()
helper.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This partially reverts commit c568d68341.
Overlayfs files will now automatically get the correct locks, no need to
hack overlay support in VFS.
It is a partial revert, because it leaves the locks_inode() calls in place
and defines locks_inode() to file_inode(). We could revert those as well,
but it would be unnecessary code churn and it makes sense to document that
we are getting the inode for locking purposes.
Don't revert MS_NOREMOTELOCK yet since that has been part of the userspace
API for some time (though not in a useful way). Will try to remove
internal flags later when the dust around the new mount API settles.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Implement stacked fiemap().
Need to split inode operations for regular file (which has fiemap) and
special file (which doesn't have fiemap).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In the common case we can just use the real file cached in
file->private_data. There are two exceptions:
1) File has been copied up since open: in this unlikely corner case just
use a throwaway real file for the operation. If ever this becomes a
perfomance problem (very unlikely, since overlayfs has been doing most fine
without correctly handling this case at all), then we can deal with that by
updating the cached real file.
2) File's f_flags have changed since open: no need to reopen the cached
real file, we can just change the flags there as well.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Implement file operations on a regular overlay file. The underlying file
is opened separately and cached in ->private_data.
It might be worth making an exception for such files when accounting in
nr_file to confirm to userspace expectations. We are only adding a small
overhead (248bytes for the struct file) since the real inode and dentry are
pinned by overlayfs anyway.
This patch doesn't have any effect, since the vfs will use d_real() to find
the real underlying file to open. The patch at the end of the series will
actually enable this functionality.
AV: make it use open_with_fake_path(), don't mess with override_creds
SzM: still need to mess with override_creds() until no fs uses
current_cred() in their open method.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Copy i_size of the underlying inode to the overlay inode in ovl_copyattr().
This is in preparation for stacking I/O operations on overlay files.
This patch shouldn't have any observable effect.
Remove stale comment from ovl_setattr() [spotted by Vivek Goyal].
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This reverts commit 31c3a70695.
Re-add functionality dealing with i_writecount on truncate to overlayfs.
This patch shouldn't have any observable effects, since we just re-assert
the writecout that vfs_truncate() already got for us.
This is in preparation for moving overlay functionality out of the VFS.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On inode creation copy certain inode flags from the underlying real inode
to the overlay inode.
This is in preparation for moving overlay functionality out of the VFS.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Copy up mtime and ctime to overlay inode after times in real object are
modified. Be careful not to dirty cachelines when not necessary.
This is in preparation for moving overlay functionality out of the VFS.
This patch shouldn't have any observable effect.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Only upper dir can be impure, but if we are in the middle of
iterating a lower real dir, dir could be copied up and marked
impure. We only want the impure cache if we started iterating
a real upper dir to begin with.
Aditya Kali reported that the following reproducer hits the
WARN_ON(!cache->refcount) in ovl_get_cache():
docker run --rm drupal:8.5.4-fpm-alpine \
sh -c 'cd /var/www/html/vendor/symfony && \
chown -R www-data:www-data . && ls -l .'
Reported-by: Aditya Kali <adityakali@google.com>
Tested-by: Aditya Kali <adityakali@google.com>
Fixes: 4edb83bb10 ('ovl: constant d_ino for non-merge dirs')
Cc: <stable@vger.kernel.org> # v4.14
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
There were no conflicts between this and the contents of linux-next
until just before the merge window, when we saw multiple problems:
- A minor conflict with my own y2038 fixes, which I could address
by adding another patch on top here.
- One semantic conflict with late changes to the NFS tree. I addressed
this by merging Deepa's original branch on top of the changes that
now got merged into mainline and making sure the merge commit includes
the necessary changes as produced by coccinelle.
- A trivial conflict against the removal of staging/lustre.
- Multiple conflicts against the VFS changes in the overlayfs tree.
These are still part of linux-next, but apparently this is no longer
intended for 4.18 [1], so I am ignoring that part.
As Deepa writes:
The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64 timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual
replacement becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions.
Thomas Gleixner adds:
I think there is no point to drag that out for the next merge window.
The whole thing needs to be done in one go for the core changes which
means that you're going to play that catchup game forever. Let's get
over with it towards the end of the merge window.
[1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CZX2
-----END PGP SIGNATURE-----
Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
"This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
As Deepa writes:
'The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64
timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual replacement
becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions'
Thomas Gleixner adds:
'I think there is no point to drag that out for the next merge
window. The whole thing needs to be done in one go for the core
changes which means that you're going to play that catchup game
forever. Let's get over with it towards the end of the merge window'"
* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
pstore: Remove bogus format string definition
vfs: change inode times to use struct timespec64
pstore: Convert internal records to timespec64
udf: Simplify calls to udf_disk_stamp_to_time
fs: nfs: get rid of memcpys for inode times
ceph: make inode time prints to be long long
lustre: Use long long type to print inode time
fs: add timespec64_truncate()
Currently, there is a small window where ovl_obtain_alias() can
race with ovl_instantiate() and create two different overlay inodes
with the same underlying real non-dir non-hardlink inode.
The race requires an adversary to guess the file handle of the
yet to be created upper inode and decode the guessed file handle
after ovl_creat_real(), but before ovl_instantiate().
This race does not affect overlay directory inodes, because those
are decoded via ovl_lookup_real() and not with ovl_obtain_alias().
This patch fixes the race, by using inode_insert5() to add a newly
created inode to cache.
If the newly created inode apears to already exist in cache (hashed
by the same real upper inode), we instantiate the dentry with the old
inode and drop the new inode, instead of silently not hashing the new
inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_get_inode() right now has 5 parameters. Soon this patch series will
add 2 more and suddenly argument list starts looking too long.
Hence pass arguments to ovl_get_inode() in a structure and it looks
little cleaner.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
vfs_mkdir() may succeed and leave the dentry passed to it unhashed and
negative. ovl_create_real() is the last caller breaking when that
happens.
[amir: split re-factoring of ovl_create_temp() to prep patch
add comment about unhashed dir after mkdir
add pr_warn() if mkdir succeeds and lookup fails]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Also used ovl_create_temp() in ovl_create_index() instead of calling
ovl_do_mkdir() directly, so now all callers of ovl_do_mkdir() are routed
through ovl_create_real(), which paves the way for Al's fix for non-hashed
result from vfs_mkdir().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Al Viro suggested to simplify callers of ovl_create_real() by
returning the created dentry (or ERR_PTR) from ovl_create_real().
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlayfs should cope with online changes to underlying layer
without crashing the kernel, which is what xfstest overlay/019
checks.
This test may sometimes trigger WARN_ON() in ovl_create_or_link()
when linking an overlay inode that has been changed on underlying
layer.
Remove those WARN_ON() to prevent the stress test from failing.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With mount option "xino=on", mounter declares that there are enough
free high bits in underlying fs to hold the layer fsid.
If overlayfs does encounter underlying inodes using the high xino
bits reserved for layer fsid, a warning will be emitted and the original
inode number will be used.
The mount option name "xino" goes after a similar meaning mount option
of aufs, but in overlayfs case, the mapping is stateless.
An example for a use case of "xino=on" is when upper/lower is on an xfs
filesystem. xfs uses 64bit inode numbers, but it currently never uses the
upper 8bit for inode numbers exposed via stat(2) and that is not likely to
change in the future without user opting-in for a new xfs feature. The
actual number of unused upper bit is much larger and determined by the xfs
filesystem geometry (64 - agno_log - agblklog - inopblog). That means
that for all practical purpose, there are enough unused bits in xfs
inode numbers for more than OVL_MAX_STACK unique fsid's.
Another use case of "xino=on" is when upper/lower is on tmpfs. tmpfs inode
numbers are allocated sequentially since boot, so they will practially
never use the high inode number bits.
For compatibility with applications that expect 32bit inodes, the feature
can be disabled with "xino=off". The option "xino=auto" automatically
detects underlying filesystem that use 32bit inodes and enables the
feature. The Kconfig option OVERLAY_FS_XINO_AUTO and module parameter of
the same name, determine if the default mode for overlayfs mount is
"xino=auto" or "xino=off".
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When overlay layers are not all on the same fs, but all inode numbers
of underlying fs do not use the high 'xino' bits, overlay st_ino values
are constant and persistent.
In that case, relax non-samefs constraint for consistent d_ino and always
iterate non-merge dir using ovl_fill_real() actor so we can remap lower
inode numbers to unique lower fs range.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When overlay layers are not all on the same fs, but all inode numbers
of underlying fs do not use the high 'xino' bits, overlay st_ino values
are constant and persistent.
In that case, set i_ino value to the same value as st_ino for nfsd
readdirplus validator.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On 64bit systems, when overlay layers are not all on the same fs, but
all inode numbers of underlying fs are not using the high bits, use the
high bits to partition the overlay st_ino address space. The high bits
hold the fsid (upper fsid is 0). This way overlay inode numbers are unique
and all inodes use overlay st_dev. Inode numbers are also persistent
for a given layer configuration.
Currently, our only indication for available high ino bits is from a
filesystem that supports file handles and uses the default encode_fh()
operation, which encodes a 32bit inode number.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Instead of allocating an anonymous bdev per lower layer, allocate
one anonymous bdev per every unique lower fs that is different than
upper fs.
Every unique lower fs is assigned an fsid > 0 and the number of
unique lower fs are stored in ofs->numlowerfs.
The assigned fsid is stored in the lower layer struct and will be
used also for inode number multiplexing.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A helper for ovl_getattr() to map the values of st_dev and st_ino
according to constant st_ino rules.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Certain properties in ovl_lookup_data should be set only for the last
element of the path. IOW, if we are calling ovl_lookup_single() for an
absolute redirect, then d->is_dir and d->opaque do not make much sense
for intermediate path elements. Instead set them only if dentry being
lookup is last path element.
As of now we do not seem to be making use of d->opaque if it is set for
a path/dentry in lower. But just define the semantics so that future code
can make use of this assumption.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
