commit d8adf5b92a upstream.
dtx_diff suggests to use <(...) syntax to pipe two inputs into it, but
this has never worked: The /proc/self/fds/... paths passed by the shell
will fail the `[ -f "${dtx}" ] && [ -r "${dtx}" ]` check in compile_to_dts,
but even with this check removed, the function cannot work: hexdump will
eat up the DTB magic, making the subsequent dtc call fail, as a pipe
cannot be rewound.
Simply remove this broken example, as there is already an alternative one
that works fine.
Fixes: 10eadc253d ("dtc: create tool to diff device trees")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113081918.10387-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4eb1782eaa upstream.
Commit 85bf17b28f ("recordmcount.pl: look for jgnop instruction as well
as bcrl on s390") added a new alternative mnemonic for the existing brcl
instruction. This is required for the combination old gcc version (pre 9.0)
and binutils since version 2.37.
However at the same time this commit introduced a typo, replacing brcl with
bcrl. As a result no mcount locations are detected anymore with old gcc
versions (pre 9.0) and binutils before version 2.37.
Fix this by using the correct mnemonic again.
Reported-by: Miroslav Benes <mbenes@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 85bf17b28f ("recordmcount.pl: look for jgnop instruction as well as bcrl on s390")
Link: https://lore.kernel.org/r/alpine.LSU.2.21.2112230949520.19849@pobox.suse.cz
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85bf17b28f upstream.
On s390, recordmcount.pl is looking for "bcrl 0,<xxx>" instructions in
the objdump -d outpout. However since binutils 2.37, objdump -d
display "jgnop <xxx>" for the same instruction. Update the
mcount_regex so that it accepts both.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211210093827.1623286-1-jmarchan@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cf2a85efda ]
For files that lack trailing newlines and match a leaking address (e.g.
wchan[1]), the leaking_addresses.pl report would run together with the
next line, making things look corrupted.
Unconditionally remove the newline on input, and write it back out on
output.
[1] https://lore.kernel.org/all/20210103142726.GC30643@xsang-OptiPlex-9020/
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211008111626.151570317@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit be358af119 upstream.
I received a build failure for a new patch I'm working on the nds32
architecture, and when I went to test it, I couldn't get to my build error,
because it failed to build with a bunch of:
Error: invalid operands (*UND* and *UND* sections) for `^'
issues with various files. Those files were temporary asm files that looked
like: kernel/.tmp_mc_fork.s
I decided to look deeper, and found that the "mc" portion of that name
stood for "mcount", and was created by the recordmcount.pl script. One that
I wrote over a decade ago. Once I knew the source of the problem, I was
able to investigate it further.
The way the recordmcount.pl script works (BTW, there's a C version that
simply modifies the ELF object) is by doing an "objdump" on the object
file. Looks for all the calls to "mcount", and creates an offset of those
locations from some global variable it can use (usually a global function
name, found with <.*>:). Creates a asm file that is a table of references
to these locations, using the found variable/function. Compiles it and
links it back into the original object file. This asm file is called
".tmp_mc_<object_base_name>.s".
The problem here is that the objdump produced by the nds32 object file,
contains things that look like:
0000159a <.L3^B1>:
159a: c6 00 beqz38 $r6, 159a <.L3^B1>
159a: R_NDS32_9_PCREL_RELA .text+0x159e
159c: 84 d2 movi55 $r6, #-14
159e: 80 06 mov55 $r0, $r6
15a0: ec 3c addi10.sp #0x3c
Where ".L3^B1 is somehow selected as the "global" variable to index off of.
Then the assembly file that holds the mcount locations looks like this:
.section __mcount_loc,"a",@progbits
.align 2
.long .L3^B1 + -5522
.long .L3^B1 + -5384
.long .L3^B1 + -5270
.long .L3^B1 + -5098
.long .L3^B1 + -4970
.long .L3^B1 + -4758
.long .L3^B1 + -4122
[...]
And when it is compiled back to an object to link to the original object,
the compile fails on the "^" symbol.
Simple solution for now, is to have the perl script ignore using function
symbols that have an "^" in the name.
Link: https://lkml.kernel.org/r/20211014143507.4ad2c0f7@gandalf.local.home
Cc: stable@vger.kernel.org
Acked-by: Greentime Hu <green.hu@gmail.com>
Fixes: fbf58a52ac ("nds32/ftrace: Add RECORD_MCOUNT support")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 52d83df682 ]
When CONFIG_TRIM_UNUSED_KSYMS is enabled, I see some warnings like this:
nm: arch/x86/entry/vdso/vdso32/note.o: no symbols
$NM (both GNU nm and llvm-nm) warns when no symbol is found in the
object. Suppress the stderr.
Fangrui Song mentioned binutils>=2.37 `nm -q` can be used to suppress
"no symbols" [1], and llvm-nm>=13.0.0 supports -q as well.
We cannot use it for now, but note it as a TODO.
[1]: https://sourceware.org/bugzilla/show_bug.cgi?id=27408
Fixes: bbda5ec671 ("kbuild: simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a979522a1a ]
To avoid unnecessary recompilations, mkcompile_h does not regenerate
compile.h if just the timestamp changed.
Though, if KBUILD_BUILD_TIMESTAMP is set, an explicit timestamp for the
build was requested, in which case we should not ignore it.
If a user follows the documentation for reproducible builds [1] and
defines KBUILD_BUILD_TIMESTAMP as the git commit timestamp, a clean
build will have the correct timestamp. A subsequent cherry-pick (or
amend) changes the commit timestamp and if an incremental build is done
with a different KBUILD_BUILD_TIMESTAMP now, that new value is not taken
into consideration. But it should for reproducibility.
Hence, whenever KBUILD_BUILD_TIMESTAMP is explicitly set, do not ignore
UTS_VERSION when making a decision about whether the regenerated version
of compile.h should be moved into place.
[1] https://www.kernel.org/doc/html/latest/kbuild/reproducible-builds.html
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 174a1dcc96 ]
When building with 'make -s', no output to stdout should be printed.
As Arnd Bergmann reported [1], mkimage shows the detailed information
of the generated images.
I think this should be suppressed by the 'cmd' macro instead of by
individual scripts.
Insert 'exec >/dev/null;' in order to redirect stdout to /dev/null for
silent builds.
[Note about this implementation]
'exec >/dev/null;' may look somewhat tricky, but this has a reason.
Appending '>/dev/null' at the end of command line is a common way for
redirection, so I first tried this:
cmd = @set -e; $(echo-cmd) $(cmd_$(1)) >/dev/null
... but it would not work if $(cmd_$(1)) itself contains a redirection.
For example, cmd_wrap in scripts/Makefile.asm-generic redirects the
output from the 'echo' command into the target file.
It would be expanded into:
echo "#include <asm-generic/$*.h>" > $@ >/dev/null
Then, the target file gets empty because the string will go to /dev/null
instead of $@.
Next, I tried this:
cmd = @set -e; $(echo-cmd) { $(cmd_$(1)); } >/dev/null
The form above would be expanded into:
{ echo "#include <asm-generic/$*.h>" > $@; } >/dev/null
This works as expected. However, it would be a syntax error if
$(cmd_$(1)) is empty.
When CONFIG_TRIM_UNUSED_KSYMS is disabled, $(call cmd,gen_ksymdeps) in
scripts/Makefile.build would be expanded into:
set -e; { ; } >/dev/null
..., which causes an syntax error.
I also tried this:
cmd = @set -e; $(echo-cmd) ( $(cmd_$(1)) ) >/dev/null
... but this causes a syntax error for the same reason.
So, finally I adopted:
cmd = @set -e; $(echo-cmd) exec >/dev/null; $(cmd_$(1))
[1]: https://lore.kernel.org/lkml/20210514135752.2910387-1-arnd@kernel.org/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8852c55240 ]
"OBJECT_FILES_NON_STANDARD_vma.o := n" has a dependency bug. When
objtool source is updated, the affected object doesn't get re-analyzed
by objtool.
Peter's new variable-sized jump label feature relies on objtool
rewriting the object file. Otherwise the system can fail to boot. That
effectively upgrades this minor dependency issue to a major bug.
The problem is that variables in prerequisites are expanded early,
during the read-in phase. The '$(objtool_dep)' variable indirectly uses
'$@', which isn't yet available when the target prerequisites are
evaluated.
Use '.SECONDEXPANSION:' which causes '$(objtool_dep)' to be expanded in
a later phase, after the target-specific '$@' variable has been defined.
Fixes: b9ab5ebb14 ("objtool: Add CONFIG_STACK_VALIDATION option")
Fixes: ab3257042c ("jump_label, x86: Allow short NOPs")
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c33f12573 ]
Since the pre-git time the checker is run first, before the compiler.
But if the source file contains some syntax error, the warnings from
the compiler are more useful than those from sparse (and other
checker most probably too).
So move the 'check' command to run after the compiler.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27f2a4db76 ]
GDB produces the following warning when debugging kernels built with
CONFIG_RELR:
BFD: /android0/linux-next/vmlinux: unknown type [0x13] section `.relr.dyn'
when loading a kernel built with CONFIG_RELR into GDB. It can also
prevent debugging symbols using such relocations.
Peter sugguests:
[That flag] means that lld will use dynamic tags and section type
numbers in the OS-specific range rather than the generic range. The
kernel itself doesn't care about these numbers; it determines the
location of the RELR section using symbols defined by a linker script.
Link: https://github.com/ClangBuiltLinux/linux/issues/1057
Suggested-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210522012626.2811297-1-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb780761e7 ]
One should only use st_shndx when >SHN_UNDEF and <SHN_LORESERVE. When
SHN_XINDEX, then use .symtab_shndx. Otherwise use 0.
This handles the case: st_shndx >= SHN_LORESERVE && st_shndx != SHN_XINDEX.
Link: https://lore.kernel.org/lkml/20210607023839.26387-1-mark-pk.tsai@mediatek.com/
Link: https://lkml.kernel.org/r/20210616154126.2794-1-mark-pk.tsai@mediatek.com
Reported-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[handle endianness of sym->st_shndx]
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 51839e29cb upstream.
Some distributions are about to switch to Python 3 support only.
This means that /usr/bin/python, which is Python 2, is not available
anymore. Hence, switch scripts to use Python 3 explicitly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c25ce589dc upstream.
Change every shebang which does not need an argument to use /usr/bin/env.
This is needed as not every distro has everything under /usr/bin,
sometimes not even bash.
Signed-off-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7ce0477150 ]
Prior to clang 13.0.0, the RISC-V name for the mcount symbol was
"mcount", which differs from the GCC version of "_mcount", which results
in the following errors:
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_level':
main.c:(.text+0xe): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_start':
main.c:(.text+0x4e): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_finish':
main.c:(.text+0x92): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `.LBB32_28':
main.c:(.text+0x30c): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `free_initmem':
main.c:(.text+0x54c): undefined reference to `mcount'
This has been corrected in https://reviews.llvm.org/D98881 but the
minimum supported clang version is 10.0.1. To avoid build errors and to
gain a working function tracer, adjust the name of the mcount symbol for
older versions of clang in mount.S and recordmcount.pl.
Link: https://github.com/ClangBuiltLinux/linux/issues/1331
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c94b430b9 ]
If the user selects the very first entry in a page and performs a
search-up operation, or selects the very last entry in a page and
performs a search-down operation that will not succeed (e.g., via
[/]asdfzzz[Up Arrow]), nconf will never terminate searching the page.
The reason is that in this case, the starting point will be set to -1
or n, which is then translated into (n - 1) (i.e., the last entry of
the page) or 0 (i.e., the first entry of the page) and finally the
search begins. This continues to work fine until the index reaches 0 or
(n - 1), at which point it will be decremented to -1 or incremented to
n, but not checked against the starting point right away. Instead, it's
wrapped around to the bottom or top again, after which the starting
point check occurs... and naturally fails.
My original implementation added another check for -1 before wrapping
the running index variable around, but Masahiro Yamada pointed out that
the actual issue is that the comparison point (starting point) exceeds
bounds (i.e., the [0,n-1] interval) in the first place and that,
instead, the starting point should be fixed.
This has the welcome side-effect of also fixing the case where the
starting point was n while searching down, which also lead to an
infinite loop.
OTOH, this code is now essentially all his work.
Amazingly, nobody seems to have been hit by this for 11 years - or at
the very least nobody bothered to debug and fix this.
Signed-off-by: Mihai Moldovan <ionic@ionic.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 999340d511 ]
On little endian system, Use aarch64_be(gcc v7.3) downloaded from
linaro.org to build image with CONFIG_CPU_BIG_ENDIAN = y,
CONFIG_FTRACE = y, CONFIG_DYNAMIC_FTRACE = y.
gcc will create symbols of _mcount but recordmcount can not create
mcount_loc for *.o.
aarch64_be-linux-gnu-objdump -r fs/namei.o | grep mcount
00000000000000d0 R_AARCH64_CALL26 _mcount
...
0000000000007190 R_AARCH64_CALL26 _mcount
The reason is than funciton arm64_is_fake_mcount can not work correctly.
A symbol of _mcount in *.o compiled with big endian compiler likes:
00 00 00 2d 00 00 01 1b
w(rp->r_info) will return 0x2d instead of 0x011b. Because w() takes
uint32_t as parameter, which truncates rp->r_info.
Use w8() instead w() to read relp->r_info
Link: https://lkml.kernel.org/r/20210222135840.56250-1-chenjun102@huawei.com
Fixes: ea0eada456 ("recordmcount: only record relocation of type R_AARCH64_CALL26 on arm64.")
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93ca696376 ]
The kernel test robot reported the following issue:
CC [M] drivers/soc/litex/litex_soc_ctrl.o
sh4-linux-objcopy: Unable to change endianness of input file(s)
sh4-linux-ld: cannot find drivers/soc/litex/.tmp_gl_litex_soc_ctrl.o: No such file or directory
sh4-linux-objcopy: 'drivers/soc/litex/.tmp_mx_litex_soc_ctrl.o': No such file
The problem is that the format of input file is elf32-shbig-linux, but
sh4-linux-objcopy wants to output a file which format is elf32-sh-linux:
$ sh4-linux-objdump -d drivers/soc/litex/litex_soc_ctrl.o | grep format
drivers/soc/litex/litex_soc_ctrl.o: file format elf32-shbig-linux
Link: https://lkml.kernel.org/r/20210210150435.2171567-1-rong.a.chen@intel.com
Link: https://lore.kernel.org/linux-mm/202101261118.GbbYSlHu-lkp@intel.com
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2cea4a7a18 upstream.
Otherwise build fails if the headers are not in the default location. While at
it also ask pkg-config for the libs, with fallback to the existing value.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Cc: stable@vger.kernel.org # 5.6.x
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6553896666 ]
Some code pathes, especially the low level entry code, must be protected
against instrumentation for various reasons:
- Low level entry code can be a fragile beast, especially on x86.
- With NO_HZ_FULL RCU state needs to be established before using it.
Having a dedicated section for such code allows to validate with tooling
that no unsafe functions are invoked.
Add the .noinstr.text section and the noinstr attribute to mark
functions. noinstr implies notrace. Kprobes will gain a section check
later.
Provide also a set of markers: instrumentation_begin()/end()
These are used to mark code inside a noinstr function which calls
into regular instrumentable text section as safe.
The instrumentation markers are only active when CONFIG_DEBUG_ENTRY is
enabled as the end marker emits a NOP to prevent the compiler from merging
the annotation points. This means the objtool verification requires a
kernel compiled with this option.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134100.075416272@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cedd1862be ]
Commit 436e980e2e ("kbuild: don't hardcode depmod path") stopped
hard-coding the path of depmod, but in the process caused trouble for
distributions that had that /sbin location, but didn't have it in the
PATH (generally because /sbin is limited to the super-user path).
Work around it for now by just adding /sbin to the end of PATH in the
depmod.sh script.
Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 135b4957ea ]
$(error-if,...) is expanded to an empty string. Currently, it relies on
eval_clause() returning xstrdup("") when all attempts for expansion fail,
but the correct implementation is to make do_error_if() return xstrdup("").
Fixes: 1d6272e6fe ("kconfig: add 'info', 'warning-if', and 'error-if' built-in functions")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03f4935135 ]
There is an unescaped left brace in a regex in OPEN_BRACE check. This
throws a runtime error when checkpatch is run with --fix flag and the
OPEN_BRACE check is executed.
Fix it by escaping the left brace.
Link: https://lkml.kernel.org/r/20201115202928.81955-1-dwaipayanray1@gmail.com
Fixes: 8d1824780f ("checkpatch: add --fix option for a couple OPEN_BRACE misuses")
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d32358be8 ]
"xargs echo" is not a safe way to remove line breaks because the input
may exceed the command line limit and xargs may break it up into
multiple invocations of echo. This should never happen because
scripts/gen_autoksyms.sh expects all undefined symbols are placed in
the second line of .mod files.
One possible way is to replace "xargs echo" with
"sed ':x;N;$!bx;s/\n/ /g'" or something, but I rewrote the code by
using awk because it is more readable.
This issue was reported by Sami Tolvanen; in his Clang LTO patch set,
$(multi-used-m) is no longer an ELF object, but a thin archive that
contains LLVM bitcode files. llvm-nm prints out symbols for each
archive member separately, which results a lot of dupications, in some
places, beyond the system-defined limit.
This problem must be fixed irrespective of LTO, and we must ensure
zero possibility of having this issue.
Link: https://lkml.org/lkml/2020/12/1/1658
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 548b8b5168 upstream.
When building for an embedded target using Yocto, we're sometimes
observing that the version string that gets built into vmlinux (and
thus what uname -a reports) differs from the path under /lib/modules/
where modules get installed in the rootfs, but only in the length of
the -gabc123def suffix. Hence modprobe always fails.
The problem is that Yocto has the concept of "sstate" (shared state),
which allows different developers/buildbots/etc. to share build
artifacts, based on a hash of all the metadata that went into building
that artifact - and that metadata includes all dependencies (e.g. the
compiler used etc.). That normally works quite well; usually a clean
build (without using any sstate cache) done by one developer ends up
being binary identical to a build done on another host. However, one
thing that can cause two developers to end up with different builds
[and thus make one's vmlinux package incompatible with the other's
kernel-dev package], which is not captured by the metadata hashing, is
this `git describe`: The output of that can be affected by
(1) git version: before 2.11 git defaulted to a minimum of 7, since
2.11 (git.git commit e6c587) the default is dynamic based on the
number of objects in the repo
(2) hence even if both run the same git version, the output can differ
based on how many remotes are being tracked (or just lots of local
development branches or plain old garbage)
(3) and of course somebody could have a core.abbrev config setting in
~/.gitconfig
So in order to avoid `uname -a` output relying on such random details
of the build environment which are rather hard to ensure are
consistent between developers and buildbots, make sure the abbreviated
sha1 always consists of exactly 12 hex characters. That is consistent
with the current rule for -stable patches, and is almost always enough
to identify the head commit unambigously - in the few cases where it
does not, the v5.4.3-00021- prefix would certainly nail it down.
[Adapt to `` vs $() differences between 5.4 and upstream.]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit efe84d408b ]
When building with
$ HOST_EXTRACFLAGS=-g make
the expectation is that host tools are built with debug informations.
This however doesn't happen if the Makefile assigns a new value to the
HOST_EXTRACFLAGS instead of appending to it. So use += instead of := for
the first assignment.
Fixes: e3fd9b5384 ("scripts/dtc: consolidate include path options in Makefile")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 13e45417ce upstream.
The usage of "capture group (...)" in the immediate condition after `&&`
results in `$1` being uninitialized. This issues a warning "Use of
uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl
line 2638".
I noticed this bug while running checkpatch on the set of commits from
v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in
their commit message.
This bug was introduced in the script by commit e518e9a59e
("checkpatch: emit an error when there's a diff in a changelog"). It
has been in the script since then.
The author intended to store the match made by capture group in variable
`$1`. This should have contained the name of the file as `[\w/]+`
matched. However, this couldn't be accomplished due to usage of capture
group and `$1` in the same regular expression.
Fix this by placing the capture group in the condition before `&&`.
Thus, `$1` can be initialized to the text that capture group matches
thereby setting it to the desired and required value.
Fixes: e518e9a59e ("checkpatch: emit an error when there's a diff in a changelog")
Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Joe Perches <joe@perches.com>
Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandey
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4a42c82e9 upstream.
Redefine GZIP, BZIP2, LZOP variables as KGZIP, KBZIP2, KLZOP resp.
GZIP, BZIP2, LZOP env variables are reserved by the tools. The original
attempt to redefine them internally doesn't work in makefiles/scripts
intercall scenarios, e.g., "make GZIP=gzip bindeb-pkg" and results in
broken builds. There can be other broken build commands because of this,
so the universal solution is to use non-reserved env variables for the
compression tools.
Fixes: 8dfb61dcba ("kbuild: add variables for compression tools")
Signed-off-by: Denis Efremov <efremov@linux.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Matthias Maennich <maennich@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8dfb61dcba upstream.
Allow user to use alternative implementations of compression tools,
such as pigz, pbzip2, pxz. For example, multi-threaded tools to
speed up the build:
$ make GZIP=pigz BZIP2=pbzip2
Variables _GZIP, _BZIP2, _LZOP are used internally because original env
vars are reserved by the tools. The use of GZIP in gzip tool is obsolete
since 2015. However, alternative implementations (e.g., pigz) still rely
on it. BZIP2, BZIP, LZOP vars are not obsolescent.
The credit goes to @grsecurity.
As a sidenote, for multi-threaded lzma, xz compression one can use:
$ export XZ_OPT="--threads=0"
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d85de3399f ]
If you right-click in the ConfigList window, you will see the following
messages in the console:
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:888
QObject::connect: (sender name: 'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:897
QObject::connect: (sender name: 'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:906
QObject::connect: (sender name: 'config')
Right, there is no such slot in QAction. I think this is a typo of
setChecked.
Due to this bug, when you toggled the menu "Option->Show Name/Range/Data"
the state of the context menu was not previously updated. Fix this.
Fixes: d5d973c3f8 ("Port xconfig to Qt5 - Put back some of the old implementation(part 2)")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa8de0a3bf ]
If you right-click the first row in the option tree, the pop-up menu
shows up, but if you right-click the second row or below, the event
is ignored due to the following check:
if (e->y() <= header()->geometry().bottom()) {
Perhaps, the intention was to show the pop-menu only when the tree
header was right-clicked, but this handler is not called in that case.
Since the origin of e->y() starts from the bottom of the header,
this check is odd.
Going forward, you can right-click anywhere in the tree to get the
pop-up menu.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3df14264ad ]
Commit ea0eada456 leads to the following build failure on powerpc:
HOSTCC scripts/recordmcount
scripts/recordmcount.c: In function 'arm64_is_fake_mcount':
scripts/recordmcount.c:440: error: 'R_AARCH64_CALL26' undeclared (first use in this function)
scripts/recordmcount.c:440: error: (Each undeclared identifier is reported only once
scripts/recordmcount.c:440: error: for each function it appears in.)
make[2]: *** [scripts/recordmcount] Error 1
Make sure R_AARCH64_CALL26 is always defined.
Fixes: ea0eada456 ("recordmcount: only record relocation of type R_AARCH64_CALL26 on arm64.")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Gregory Herrero <gregory.herrero@oracle.com>
Cc: Gregory Herrero <gregory.herrero@oracle.com>
Link: https://lore.kernel.org/r/5ca1be21fa6ebf73203b45fd9aadd2bafb5e6b15.1597049145.git.christophe.leroy@csgroup.eu
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea0eada456 ]
Currently, if a section has a relocation to '_mcount' symbol, a new
__mcount_loc entry will be added whatever the relocation type is.
This is problematic when a relocation to '_mcount' is in the middle of a
section and is not a call for ftrace use.
Such relocation could be generated with below code for example:
bool is_mcount(unsigned long addr)
{
return (target == (unsigned long) &_mcount);
}
With this snippet of code, ftrace will try to patch the mcount location
generated by this code on module load and fail with:
Call trace:
ftrace_bug+0xa0/0x28c
ftrace_process_locs+0x2f4/0x430
ftrace_module_init+0x30/0x38
load_module+0x14f0/0x1e78
__do_sys_finit_module+0x100/0x11c
__arm64_sys_finit_module+0x28/0x34
el0_svc_common+0x88/0x194
el0_svc_handler+0x38/0x8c
el0_svc+0x8/0xc
---[ end trace d828d06b36ad9d59 ]---
ftrace failed to modify
[<ffffa2dbf3a3a41c>] 0xffffa2dbf3a3a41c
actual: 66:a9:3c:90
Initializing ftrace call sites
ftrace record flags: 2000000
(0)
expected tramp: ffffa2dc6cf66724
So Limit the relocation type to R_AARCH64_CALL26 as in perl version of
recordmcount.
Fixes: af64d2aa87 ("ftrace: Add arm64 support to recordmcount")
Signed-off-by: Gregory Herrero <gregory.herrero@oracle.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20200717143338.19302-1-gregory.herrero@oracle.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 55c7549819 upstream.
When running `make coccicheck` in report mode using the
add_namespace.cocci file, it will fail for files that contain
MODULE_LICENSE. Those match the replacement precondition, but spatch
errors out as virtual.ns is not set.
In order to fix that, add the virtual rule nsdeps and only do search and
replace if that rule has been explicitly requested.
In order to make spatch happy in report mode, we also need a dummy rule,
as otherwise it errors out with "No rules apply". Using a script:python
rule appears unrelated and odd, but this is the shortest I could come up
with.
Adjust scripts/nsdeps accordingly to set the nsdeps rule when run trough
`make nsdeps`.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Fixes: c7c4e29fb5 ("scripts: add_namespace: Fix coccicheck failed")
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: jeyu@kernel.org
Cc: cocci@systeme.lip6.fr
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Maennich <maennich@google.com>
Reported-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/20200604164145.173925-1-maennich@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7359608a27 ]
Commit ed66f991bb ("module: Refactor section attr into bin attribute")
removed the 'name' field from 'struct module_sect_attr' triggering the
following error when invoking lx-symbols:
(gdb) lx-symbols
loading vmlinux
scanning for modules in linux/build
loading @0xffffffffc014f000: linux/build/drivers/net/tun.ko
Python Exception <class 'gdb.error'> There is no member named name.:
Error occurred in Python: There is no member named name.
This patch fixes the issue taking the module name from the 'struct
attribute'.
Fixes: ed66f991bb ("module: Refactor section attr into bin attribute")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Kieran Bingham <kbingham@kernel.org>
Link: http://lkml.kernel.org/r/20200722102239.313231-1-sgarzare@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d178770d8d ]
Currently the basepath is removed only from the beginning of the string.
When the symbol is inlined and there's multiple line outputs of
addr2line, only the first line would have basepath removed.
Change to remove the basepath prefix from all lines.
Fixes: 31013836a7 ("scripts/decode_stacktrace: match basepath using shell prefix operator, not regex")
Co-developed-by: Shik Chen <shik@chromium.org>
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Shik Chen <shik@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Link: http://lkml.kernel.org/r/20200720082709.252805-1-pihsun@chromium.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ef57b21d6 ]
When compiling a kernel with Clang and LTO, we need to run
recordmcount on vmlinux.o with a large number of sections, which
currently fails as the program doesn't understand extended
section indexes. This change adds support for processing binaries
with >64k sections.
Link: https://lkml.kernel.org/r/20200424193046.160744-1-samitolvanen@google.com
Link: https://lore.kernel.org/lkml/CAK7LNARbZhoaA=Nnuw0=gBrkuKbr_4Ng_Ei57uafujZf7Xazgw@mail.gmail.com/
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Matt Helsley <mhelsley@vmware.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2f02ebd8f ]
When cc-option and friends evaluate compiler flags, the temporary file
$$TMP is created as an output object, and automatically cleaned up.
The actual file path of $$TMP is .<pid>.tmp, here <pid> is the process
ID of $(shell ...) invoked from cc-option. (Please note $$$$ is the
escape sequence of $$).
Such garbage files are cleaned up in most cases, but some compiler flags
create additional output files.
For example, -gsplit-dwarf creates a .dwo file.
When CONFIG_DEBUG_INFO_SPLIT=y, you will see a bunch of .<pid>.dwo files
left in the top of build directories. You may not notice them unless you
do 'ls -a', but the garbage files will increase every time you run 'make'.
This commit changes the temporary object path to .tmp_<pid>/tmp, and
removes .tmp_<pid> directory when exiting. Separate build artifacts such
as *.dwo will be cleaned up all together because their file paths are
usually determined based on the base name of the object.
Another example is -ftest-coverage, which outputs the coverage data into
<base-name-of-object>.gcno
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5967577231 ]
Misuse of CONFIG_* in UAPI headers should result in an error. These config
options can be set in userspace by the user application which includes
these headers to control the APIs and structures being used in a kernel
which supports multiple targets.
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72d24accf0 ]
When System.map was generated, the kernel used mksysmap to
filter the kernel symbols, but all the symbols with the
second letter 'L' in the kernel were filtered out, not just
the symbols starting with 'dot + L'.
For example:
ashimida@ubuntu:~/linux$ cat System.map |grep ' .L'
ashimida@ubuntu:~/linux$ nm -n vmlinux |grep ' .L'
ffff0000088028e0 t bLength_show
......
ffff0000092e0408 b PLLP_OUTC_lock
ffff0000092e0410 b PLLP_OUTA_lock
The original intent should be to filter out all local symbols
starting with '.L', so the dot should be escaped.
Fixes: 00902e9847 ("mksysmap: Add h8300 local symbol pattern")
Signed-off-by: ashimida <ashimida@linux.alibaba.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 90ceddcb49 upstream.
Simplify gen_btf logic to make it work with llvm-objcopy. The existing
'file format' and 'architecture' parsing logic is brittle and does not
work with llvm-objcopy/llvm-objdump.
'file format' output of llvm-objdump>=11 will match GNU objdump, but
'architecture' (bfdarch) may not.
.BTF in .tmp_vmlinux.btf is non-SHF_ALLOC. Add the SHF_ALLOC flag
because it is part of vmlinux image used for introspection. C code
can reference the section via linker script defined __start_BTF and
__stop_BTF. This fixes a small problem that previous .BTF had the
SHF_WRITE flag (objcopy -I binary -O elf* synthesized .data).
Additionally, `objcopy -I binary` synthesized symbols
_binary__btf_vmlinux_bin_start and _binary__btf_vmlinux_bin_stop (not
used elsewhere) are replaced with more commonplace __start_BTF and
__stop_BTF.
Add 2>/dev/null because GNU objcopy (but not llvm-objcopy) warns
"empty loadable segment detected at vaddr=0xffffffff81000000, is this intentional?"
We use a dd command to change the e_type field in the ELF header from
ET_EXEC to ET_REL so that lld will accept .btf.vmlinux.bin.o. Accepting
ET_EXEC as an input file is an extremely rare GNU ld feature that lld
does not intend to support, because this is error-prone.
The output section description .BTF in include/asm-generic/vmlinux.lds.h
avoids potential subtle orphan section placement issues and suppresses
--orphan-handling=warn warnings.
Fixes: df786c9b94 ("bpf: Force .BTF section start to zero when dumping from vmlinux")
Fixes: cb0cc635c7 ("powerpc: Include .BTF section")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Stanislav Fomichev <sdf@google.com>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://github.com/ClangBuiltLinux/linux/issues/871
Link: https://lore.kernel.org/bpf/20200318222746.173648-1-maskray@google.com
Signed-off-by: Maria Teguiani <teguiani@google.com>
Tested-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit af73d78bd3 ]
When CONFIG_DEBUG_INFO is enabled, the two kallsyms linking steps spend
time collecting and writing the dwarf sections to the temporary output
files. kallsyms does not need this information, and leaving it off
halves their linking time. This is especially noticeable without
CONFIG_DEBUG_INFO_REDUCED. The BTF linking stage, however, does still
need those details.
Refactor the BTF and kallsyms generation stages slightly for more
regularized temporary names. Skip debug during kallsyms links.
Additionally move "info BTF" to the correct place since commit
8959e39272 ("kbuild: Parameterize kallsyms generation and correct
reporting"), which added "info LD ..." to vmlinux_link calls.
For a full debug info build with BTF, my link time goes from 1m06s to
0m54s, saving about 12 seconds, or 18%.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/202003031814.4AEA3351@keescook
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50e36be1fb ]
The current implementations of the rb_first() and rb_last() gdb
functions have a variable that references itself in its instanciation,
which causes the function to throw an error if a specific condition on
the argument is met. The original author rather intended to reference
the argument and made a typo. Referring the argument instead makes the
function work as intended.
Signed-off-by: Aymeric Agon-Rambosson <aymeric.agon@yandex.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20200427051029.354840-1-aymeric.agon@yandex.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7527373fe ]
Remove "params.h" include, which has been dropped in GCC 10.
Remove is_a_helper() macro, which is now defined in gimple.h, as seen
when running './scripts/gcc-plugin.sh g++ g++ gcc':
In file included from <stdin>:1:
./gcc-plugins/gcc-common.h:852:13: error: redefinition of ‘static bool is_a_helper<T>::test(U*) [with U = const gimple; T = const ggoto*]’
852 | inline bool is_a_helper<const ggoto *>::test(const_gimple gs)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ./gcc-plugins/gcc-common.h:125,
from <stdin>:1:
/usr/lib/gcc/x86_64-redhat-linux/10/plugin/include/gimple.h:1037:1: note: ‘static bool is_a_helper<T>::test(U*) [with U = const gimple; T = const ggoto*]’ previously declared here
1037 | is_a_helper <const ggoto *>::test (const gimple *gs)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Add -Wno-format-diag to scripts/gcc-plugins/Makefile to avoid
meaningless warnings from error() formats used by plugins:
scripts/gcc-plugins/structleak_plugin.c: In function ‘int plugin_init(plugin_name_args*, plugin_gcc_version*)’:
scripts/gcc-plugins/structleak_plugin.c:253:12: warning: unquoted sequence of 2 consecutive punctuation characters ‘'-’ in format [-Wformat-diag]
253 | error(G_("unknown option '-fplugin-arg-%s-%s'"), plugin_name, argv[i].key);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Frédéric Pierret (fepitre) <frederic.pierret@qubes-os.org>
Link: https://lore.kernel.org/r/20200407113259.270172-1-frederic.pierret@qubes-os.org
[kees: include -Wno-format-diag for plugin builds]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e08df079b2 upstream.
If the trapping instruction contains a ':', for a memory access through
segment registers for example, the sed substitution will insert the '*'
marker in the middle of the instruction instead of the line address:
2b: 65 48 0f c7 0f cmpxchg16b %gs:*(%rdi) <-- trapping instruction
I started to think I had forgotten some quirk of the assembly syntax
before noticing that it was actually coming from the script. Fix it to
add the address marker at the right place for these instructions:
28: 49 8b 06 mov (%r14),%rax
2b:* 65 48 0f c7 0f cmpxchg16b %gs:(%rdi) <-- trapping instruction
30: 0f 94 c0 sete %al
Fixes: 18ff44b189 ("scripts/decodecode: make faulting insn ptr more robust")
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20200419223653.GA31248@visor
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e461bc9f9a ]
Sed broke on some strings as it used colon as a separator.
I made it more robust by using \001, which is legit POSIX AFAIK.
E.g. ./config --set-str CONFIG_USBNET_DEVADDR "de:ad:be:ef:00:01"
failed with: sed: -e expression #1, char 55: unknown option to `s'
Signed-off-by: Jeremie Francois (on alpha) <jeremie.francois@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
