The rules are getting real hard, better to dump my brain into text a
bit. This is by far not complete, but I think I reasonable start at
least.
Some of the older kms structures would need a full doc review anyway
...
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170328155349.5972-2-daniel.vetter@ffwll.ch
Allow drivers to return a custom drm_format_info structure for special
fb layouts. We'll use this for the compression control surface in i915.
v2: Fix drm_get_format_info() kernel doc (Laurent)
Don't pass 'dev' to the new hook (Laurent)
v3: s/compresssion/compression/ (Ben)
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321181218.10042-4-ville.syrjala@linux.intel.com
At the time userspace does setcrtc, we've already promised the mode
would work. The promise is based on the theoretical capabilities of
the link, but it's possible we can't reach this in practice. The DP
spec describes how the link should be reduced, but we can't reduce
the link below the requirements of the mode. Black screen follows.
One idea would be to have setcrtc return a failure. However, it
already should not fail as the atomic checks have passed. It would
also conflict with the idea of making setcrtc asynchronous in the
future, returning before the actual mode setting and link training.
Another idea is to train the link "upfront" at hotplug time, before
pruning the mode list, so that we can do the pruning based on
practical not theoretical capabilities. However, the changes for link
training are pretty drastic, all for the sake of error handling and
DP compliance, when the most common happy day scenario is the current
approach of link training at mode setting time, using the optimal
parameters for the mode. It is also not certain all hardware could do
this without the pipe on; not even all our hardware can do this. Some
of this can be solved, but not trivially.
Both of the above ideas also fail to address link degradation *during*
operation.
The solution is to add a new "link-status" connector property in order
to address link training failure in a way that:
a) changes the current happy day scenario as little as possible, to
avoid regressions, b) can be implemented the same way by all drm
drivers, c) is still opt-in for the drivers and userspace, and opting
out doesn't regress the user experience, d) doesn't prevent drivers
from implementing better or alternate approaches, possibly without
userspace involvement. And, of course, handles all the issues presented.
In the usual happy day scenario, this is always "good". If something
fails during or after a mode set, the kernel driver can set the link
status to "bad" and issue a hotplug uevent for userspace to have it
re-check the valid modes through GET_CONNECTOR IOCTL, and try modeset
again. If the theoretical capabilities of the link can't be reached,
the mode list is trimmed based on that.
v7 by Jani:
* Rebase, simplify set property while at it, checkpatch fix
v6:
* Fix a typo in kernel doc (Sean Paul)
v5:
* Clarify doc for silent rejection of atomic properties by driver (Daniel Vetter)
v4:
* Add comments in kernel-doc format (Daniel Vetter)
* Update the kernel-doc for link-status (Sean Paul)
v3:
* Fixed a build error (Jani Saarinen)
v2:
* Removed connector->link_status (Daniel Vetter)
* Set connector->state->link_status in drm_mode_connector_set_link_status_property
(Daniel Vetter)
* Set the connector_changed flag to true if connector->state->link_status changed.
* Reset link_status to GOOD in update_output_state (Daniel Vetter)
* Never allow userspace to set link status from Good To Bad (Daniel Vetter)
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net> (for the -modesetting patch)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/0182487051aa9f1594820e35a4853de2f8747b4e.1481883920.git.jani.nikula@intel.com
A couple of the kms functions didn't have the correct/newest names.
This prevented them to be identified as refs in the html doc.
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Tested-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170222084741.8485-1-architt@codeaurora.org
Backmerge the main pull request to sync up with all the newly landed
drivers. Otherwise we'll have chaos even before 4.12 started in
earnest.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYoM2fAAoJEHm+PkMAQRiGr9MH/izEAMri7rJ0QMc3ejt+WmD0
8pkZw3+MVn71z6cIEgpzk4QkEWJd5rfhkETCeCp7qQ9V6cDW1FDE9+0OmPjiphDt
nnzKs7t7skEBwH5Mq5xygmIfkv+Z0QGHZ20gfQWY3F56Uxo+ARF88OBHBLKhqx3v
98C7YbMFLKBslKClA78NUEIdx0UfBaRqerlERx0Lfl9aoOrbBS6WI3iuREiylpih
9o7HTrwaGKkU4Kd6NdgJP2EyWPsd1LGalxBBjeDSpm5uokX6ALTdNXDZqcQscHjE
RmTqJTGRdhSThXOpNnvUJvk9L442yuNRrVme/IqLpxMdHPyjaXR3FGSIDb2SfjY=
=VMy8
-----END PGP SIGNATURE-----
Merge tag 'v4.10-rc8' into drm-next
Linux 4.10-rc8
Backmerge Linus rc8 to fix some conflicts, but also
to avoid pulling it in via a fixes pull from someone.
The drm_mode_config helper private field points to a structure of
function pointers that don't need to be modified at runtime. Make it
const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Acked-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170102091613.6310-1-laurent.pinchart@ideasonboard.com
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
v2: Review from Eric.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-4-daniel.vetter@ffwll.ch
Currently if the userspace declares a int variable to store the out_fence
fd and pass it to OUT_FENCE_PTR the kernel will overwrite the 32 bits
above the int variable on 64 bits systems.
Fix this by making the internal storage of out_fence in the kernel a s32
pointer.
Reported-by: Chad Versace <chadversary@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Fixes: beaf5af480 ("drm/fence: add out-fences support")
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-and-Tested-by: Chad Versace <chadversary@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484317329-9293-1-git-send-email-gustavo@padovan.org
sed -e 's/\( \* .*\)struct &\([_a-z]*\)/\1\&struct \2/' -i
Originally I wasnt a friend of this style because I thought a
line-break between the "&struct" and "foo" part would break it. But a
quick test shows that " * &struct \n * foo\n" works pefectly well with
current kernel-doc. So time to mass-apply these changes!
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-6-git-send-email-daniel.vetter@ffwll.ch
The requirements for connector_list locking are a bit tricky:
- We need to be able to jump over zombie conectors (i.e. with refcount
== 0, but not yet removed from the list). If instead we require that
there's no zombies on the list then the final kref_put must happen
under the list protection lock, which means that locking context
leaks all over the place. Not pretty - better to deal with zombies
and wrap the locking just around the list_del in the destructor.
- When we walk the list we must _not_ hold the connector list lock. We
walk the connector list at an absolutely massive amounts of places,
if all those places can't ever call drm_connector_unreference the
code would get unecessarily complicated.
- connector_list needs it own lock, again too many places that walk it
that we could reuse e.g. mode_config.mutex without resulting in
inversions.
- Lots of code uses these loops to look-up a connector, i.e. they want
to be able to call drm_connector_reference. But on the other hand we
want connectors to stay on that list until they're dead (i.e.
connector_list can't hold a full reference), which means despite the
"can't hold lock for the loop body" rule we need to make sure a
connector doesn't suddenly become a zombie.
At first Dave&I discussed various horror-show approaches using srcu,
but turns out it's fairly easy:
- For the loop body we always hold an additional reference to the
current connector. That means it can't zombify, and it also means
it'll stay on the list, which means we can use it as our iterator to
find the next connector.
- When we try to find the next connector we only have to jump over
zombies. To make sure we don't chase bad pointers that entire loop
is protected with the new connect_list_lock spinlock. And because we
know that we're starting out with a non-zombie (need to drop our
reference for the old connector only after we have our new one),
we're guranteed to still be on the connector_list and either find
the next non-zombie or complete the iteration.
- Only downside is that we need to make sure that the temporary
reference for the loop body doesn't leak. iter_get/put() functions +
lockdep make sure that's the case.
- To avoid a flag day the new iterator macro has an _iter postfix. We
can rename it back once all the users of the unsafe version are gone
(there's about 100 list walkers for the connector_list).
For now this patch only converts all the list walking in the core,
leaving helpers and drivers for later patches. The nice thing is that
we can now finally remove 2 FIXME comments from the
register/unregister functions.
v2:
- use irqsafe spinlocks, so that we can use this in drm_state_dump
too.
- nuke drm_modeset_lock_all from drm_connector_init, now entirely
cargo-culted nonsense.
v3:
- do {} while (!kref_get_unless_zero), makes for a tidier loop (Dave).
- pretty kerneldoc
- add EXPORT_SYMBOL, helpers&drivers are supposed to use this.
v4: Change lockdep annotations to only check whether we release the
iter fake lock again (i.e. make sure that iter_put is called), but
not check any locking dependecies itself. That seams to require a
recursive read lock in trylock mode.
Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-6-daniel.vetter@ffwll.ch
Support DRM out-fences by creating a sync_file with a fence for each CRTC
that sets the OUT_FENCE_PTR property.
We use the out_fence pointer received in the OUT_FENCE_PTR prop to send
the sync_file fd back to userspace.
The sync_file and fd are allocated/created before commit, but the
fd_install operation only happens after we know that commit succeed.
v2: Comment by Rob Clark:
- Squash commit that adds DRM_MODE_ATOMIC_OUT_FENCE flag here.
Comment by Daniel Vetter:
- Add clean up code for out_fences
v3: Comments by Daniel Vetter:
- create DRM_MODE_ATOMIC_EVENT_MASK
- userspace should fill out_fences_ptr with the crtc_ids for which
it wants fences back.
v4: Create OUT_FENCE_PTR properties and remove old approach.
v5: Comments by Brian Starkey:
- Remove extra fence_get() in atomic_ioctl()
- Check ret before iterating on the crtc_state
- check ret before fd_install
- set fence_state to NULL at the beginning
- check fence_state->out_fence_ptr before put_user()
- change order of fput() and put_unused_fd() on failure
- Add access_ok() check to the out_fence_ptr received
- Rebase after fence -> dma_fence rename
- Store out_fence_ptr in the drm_atomic_state
- Split crtc_setup_out_fence()
- return -1 as out_fence with TEST_ONLY flag
v6: Comments by Daniel Vetter
- Add prepare/unprepare_crtc_signaling()
- move struct drm_out_fence_state to drm_atomic.c
- mark get_crtc_fence() as static
Comments by Brian Starkey
- proper set fence_ptr fence_state array
- isolate fence_idx increment
- improve error handling
v7: Comments by Daniel Vetter
- remove prefix from internal functions
- make out_fence_ptr an s64 pointer
- degrade DRM_INFO to DRM_DEBUG_ATOMIC when put_user fail
- fix doc issues
- filter out OUT_FENCE_PTR == NULL and do not fail in this case
- add complete_crtc_signalling()
- krealloc fence_state on demand
Comment by Brian Starkey
- remove unused crtc_state arg from get_out_fence()
v8: Comment by Brian Starkey
- cancel events before check for !fence_state
- convert a few lefovers u64 types for out_fence_ptr
- fix memleak by assign fence_state earlier after realloc
- proper accout num_fences in case of error
v9: Comment by Brian Starkey
- memset last position of fence_state after krealloc
Comments by Sean Paul
- pass install_fds in complete_crtc_signaling() instead of ret
- put_user(-1, fence_ptr) when decoding props
v10: Comment by Brian Starkey
- remove unneeded num_fences increment on error path
- kfree fence_state after installing fences fd
v11: rebase against latest drm-misc
v12: rebase again against latest drm-misc
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Brian Starkey <brian.starkey@arm.com> (v10)
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Robert Foss <robert.foss@collabora.com> (v10)
[danvet: Appease checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479301221-13056-1-git-send-email-gustavo@padovan.org
There is now a new property called IN_FENCE_FD attached to every plane
state that receives sync_file fds from userspace via the atomic commit
IOCTL.
The fd is then translated to a fence (that may be a fence_array
subclass or just a normal fence) and then used by DRM to fence_wait() for
all fences in the sync_file to signal. So it only commits when all
framebuffers are ready to scanout.
v2: Comments by Daniel Vetter:
- remove set state->fence = NULL in destroy phase
- accept fence -1 as valid and just return 0
- do not call fence_get() - sync_file_fences_get() already calls it
- fence_put() if state->fence is already set, in case userspace
set the property more than once.
v3: WARN_ON if fence is set but state has no FB
v4: Comment from Maarten Lankhorst
- allow set fence with no related fb
v5: rename FENCE_FD to IN_FENCE_FD
v6: Comments by Daniel Vetter:
- rename plane_state->in_fence back to "fence"
- re-introduce WARN_ON if fence set but no fb
- rebase after fence -> dma_fence rename
v7: Comments by Brian Starkey
- set state->fence to NULL when duplicating the state
- fail if IN_FENCE_FD was already set
v8: rebase against latest drm-misc
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Robert Foss <robert.foss@collabora.com>
[danvet: Rebase onto extracted drm_mode_config.[hc].]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And shuffle the kernel-doc structure a bit since drm_crtc.[hc] now
only contains CRTC-related functions and structures.
v2:
- rebase onto drm-misc
- don't forget to move drm_mode_config_cleanup.
- move 2 internal decls under the right heading (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
