Impact: remove 32-bit optimization to prepare unification
x86-32 and -64 differ in the way they context-switch tasks
with io permission bitmaps. x86-64 simply copies the next
tasks io bitmap into place (if any) on context switch. x86-32
invalidates the bitmap on context switch, so that the next
IO instruction will fault; at that point it installs the
appropriate IO bitmap.
This makes context switching IO-bitmap-using tasks a bit more
less expensive, at the cost of making the next IO instruction
slower due to the extra fault. This tradeoff only makes sense
if IO-bitmap-using processes are relatively common, but they
don't actually use IO instructions very often.
However, in a typical desktop system, the only process likely
to be using IO bitmaps is the X server, and nothing at all on
a server. Therefore the lazy context switch doesn't really win
all that much, and its just a gratuitious difference from
64-bit code.
This patch removes the lazy context switch, with a view to
unifying this code in a later change.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: standardize IO on cached ops
On modern CPUs it is almost always a bad idea to use non-temporal stores,
as the regression in this commit has shown it:
30d697f: x86: fix performance regression in write() syscall
The kernel simply has no good information about whether using non-temporal
stores is a good idea or not - and trying to add heuristics only increases
complexity and inserts fragility.
The regression on cached write()s took very long to be found - over two
years. So dont take any chances and let the hardware decide how it makes
use of its caches.
The only exception is drivers/gpu/drm/i915/i915_gem.c: there were we are
absolutely sure that another entity (the GPU) will pick up the dirty
data immediately and that the CPU will not touch that data before the
GPU will.
Also, keep the _nocache() primitives to make it easier for people to
experiment with these details. There may be more clear-cut cases where
non-cached copies can be used, outside of filemap.c.
Cc: Salman Qazi <sqazi@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This reverts commit 17581ad812.
Sitsofe Wheeler reported that /dev/dri/card0 is MIA on his EeePC 900
and bisected it to this commit.
Graphics card is an i915 in an EeePC 900:
00:02.0 VGA compatible controller [0300]:
Intel Corporation Mobile 915GM/GMS/910GML
Express Graphics Controller [8086:2592] (rev 04)
( Most likely the ioremap() of the driver failed and hence the card
did not initialize. )
Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Bisected-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix new breakages introduced by previous fix
Commit c132937556 tried to clean up
bootmem arch wrapper but it wasn't quite correct. Before the commit,
the followings were broken.
* Low level interface functions prefixed with __ ignored arch
preference.
* reserve_bootmem(...) can't be mapped into
reserve_bootmem_node(NODE_DATA(0)->bdata, ...) because the node is
not preference here. The region specified MUST fall into the
specified region; otherwise, it will panic.
After the commit,
* If allocation fails for the arch preferred node, it should fallback
to whatever is available. Instead, it simply failed allocation.
There are too many internal details to allow generic wrapping and
still keep things simple for archs. Plus, all that arch wants is a
way to prefer certain node over another.
This patch drops the generic wrapping around alloc_bootmem_core() and
add alloc_bootmem_core() instead. If necessary, arch can define
bootmem_arch_referred_node() macro or function which takes all
allocation information and returns the preferred node. bootmem
generic code will always try the preferred node first and then
fallback to other nodes as usual.
Breakages noted and changes reviewed by Johannes Weiner.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Impact: unification
This patch unify fixmap_32.h and fixmap_64.h into fixmap.h.
Things that we can't merge now are using CONFIG_X86_{32,64}
(e.g.:vsyscall and EFI)
Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: cleanup
Just prepare fixmap for later mechanic unification.
No real modification on code.
text data bss dec hex filename
3831152 353188 372736 4557076 458914 vmlinux-32.after
3831152 353188 372736 4557076 458914 vmlinux-32.before
Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: cleanup
Just prepare fixmap for later mechanic unification.
No real modification on code.
text data bss dec hex filename
4312362 527192 421924 5261478 5048a6 vmlinux-64.after
4312362 527192 421924 5261478 5048a6 vmlinux-64.before
Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: new fixmap allocation
FIX_EFI_IO_MAP_FIRST_PAGE is used only when EFI is enabled.
Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: New fixmap allocations
Add CONFIG_X86_{LOCAL,IO}_APIC to enum fixed_address.
FIX_APIC_BASE is used only when CONFIG_X86_LOCAL_APIC is
enabled and FIX_IO_APIC_BASE_* are used only when
CONFIG_X86_IO_APIC is enabled.
Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: new interface (not yet use)
Define reserve_top_address for x86_64; only for later x86 integration.
Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: new interface, not yet used
Now, with these macros, x86_64 code can know where start the
permanent and non-permanent fixed mapped address.
This patch make these macros equal fixmap_32.h for future
x86 integration.
Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: rename
Rename __FIXADDR_SIZE to FIXADDR_SIZE
and __FIXADDR_BOOT_SIZE to FIXADDR_BOOT_SIZE.
Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: cleanup
- rename apic->wakeup_cpu to apic->wakeup_secondary_cpu, to
make it apparent that this is an SMP-only method
- handle NULL ->wakeup_secondary_cpus to mean the default INIT
wakeup sequence - this allows simplification of the APIC
driver templates.
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: build fix
wakeup_secondary_cpu_via_init(), the default platform method for
booting a secondary CPU, is always used on UP due to probe_32.c,
if CONFIG_X86_LOCAL_APIC is enabled but SMP is off.
So provide a UP wrapper inline as well.
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
that is only needed when CONFIG_X86_VSMP is defined with 64bit
also remove dead code about PCI, because CONFIG_X86_VSMP depends on PCI
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
x86_quirks->update_apic() calling looks crazy. so try to remove it:
1. every apic take wakeup_cpu member directly
2. separate es7000_apic to es7000_apic_cluster
3. use uv_wakeup_cpu directly
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make io_mapping_create_wc and io_mapping_free go through PAT to make sure
that there are no memory type aliases.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
io_mapping_create_wc should take a resource_size_t parameter in place of
unsigned long. With unsigned long, there will be no way to map greater than 4GB
address in i386/32 bit.
On x86, greater than 4GB addresses cannot be mapped on i386 without PAE. Return
error for such a case.
Patch also adds a structure for io_mapping, that saves the base, size and
type on HAVE_ATOMIC_IOMAP archs, that can be used to verify the offset on
io_mapping_map calls.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a function to check and keep identity maps in sync, when changing
any memory type. One of the follow on patches will also use this
routine.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: make more types of copies non-temporal
This change makes the following simple fix:
30d697f: x86: fix performance regression in write() syscall
A bit more sophisticated: we check the 'total' number of bytes
written to decide whether to copy in a cached or a non-temporal
way.
This will for example cause the tail (modulo 4096 bytes) chunk
of a large write() to be non-temporal too - not just the page-sized
chunks.
Cc: Salman Qazi <sqazi@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, enable future change
Add a 'total bytes copied' parameter to __copy_from_user_*nocache(),
and update all the callsites.
The parameter is not used yet - architecture code can use it to
more intelligently decide whether the copy should be cached or
non-temporal.
Cc: Salman Qazi <sqazi@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
http://bugzilla.kernel.org/show_bug.cgi?id=10968
[ Updated for current tree, and fixed compile failure
when p4-clockmod was built modular -- davej]
From: Matthias-Christian Ott <ott@mirix.org>
Signed-off-by: Dominik Brodowski <linux@brodo.de>
Signed-off-by: Dave Jones <davej@redhat.com>
Impact: cleanup
Unused macro parameters cause spurious unused variable warnings.
Convert all cacheflush macros to inline functions to avoid the
warnings and achieve better type checking.
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: Major new feature
Intel CMCI (Corrected Machine Check Interrupt) is a new
feature on Nehalem CPUs. It allows the CPU to trigger
interrupts on corrected events, which allows faster
reaction to them instead of with the traditional
polling timer.
Also use CMCI to discover shared banks. Machine check banks
can be shared by CPU threads or even cores. Using the CMCI enable
bit it is possible to detect the fact that another CPU already
saw a specific bank. Use this to assign shared banks only
to one CPU to avoid reporting duplicated events.
On CPU hot unplug bank sharing is re discovered. This is done
using a thread that cycles through all the CPUs.
To avoid races between the poller and CMCI we only poll
for banks that are not CMCI capable and only check CMCI
owned banks on a interrupt.
The shared banks ownership information is currently only used for
CMCI interrupts, not polled banks.
The sharing discovery code follows the algorithm recommended in the
IA32 SDM Vol3a 14.5.2.1
The CMCI interrupt handler just calls the machine check poller to
pick up the machine check event that caused the interrupt.
I decided not to implement a separate threshold event like
the AMD version has, because the threshold is always one currently
and adding another event didn't seem to add any value.
Some code inspired by Yunhong Jiang's Xen implementation,
which was in term inspired by a earlier CMCI implementation
by me.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: New register definitions only
CMCI means support for raising an interrupt on a corrected machine
check event instead of having to poll for it. It's a new feature in
Intel Nehalem CPUs available on some machine check banks.
For details see the IA32 SDM Vol3a 14.5
Define the registers for it as a preparation for further patches.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Define a per cpu bitmap that contains the banks polled by the machine
check poller. This is needed for the CMCI code in the next patches
to be able to disable polling on specific banks.
The bank by default contains all banks, so there is no behaviour
change. Only future code will remove some banks from the polling
set.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: cleanup; preparation for feature
The mce_amd_64 code has an own private MC threshold vector with an own
interrupt handler. Since Intel needs a similar handler
it makes sense to share the vector because both can not
be active at the same time.
I factored the common APIC handler code into a separate file which can
be used by both the Intel or AMD MC code.
This is needed for the next patch which adds an Intel specific
CMCI handler.
This patch should be a nop for AMD, it just moves some code
around.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: Cleanup (code movement)
Move MAX_NR_BANKS into mce.h because it's needed there
for followup patches.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
While the introduction of __copy_from_user_nocache (see commit:
0812a579c9) may have been an improvement
for sufficiently large writes, there is evidence to show that it is
deterimental for small writes. Unixbench's fstime test gives the
following results for 256 byte writes with MAX_BLOCK of 2000:
2.6.29-rc6 ( 5 samples, each in KB/sec ):
283750, 295200, 294500, 293000, 293300
2.6.29-rc6 + this patch (5 samples, each in KB/sec):
313050, 3106750, 293350, 306300, 307900
2.6.18
395700, 342000, 399100, 366050, 359850
See w_test() in src/fstime.c in unixbench version 4.1.0. Basically, the above test
consists of counting how much we can write in this manner:
alarm(10);
while (!sigalarm) {
for (f_blocks = 0; f_blocks < 2000; ++f_blocks) {
write(f, buf, 256);
}
lseek(f, 0L, 0);
}
Note, there are other components to the write syscall regression
that are not addressed here.
Signed-off-by: Salman Qazi <sqazi@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: minor change to populate_extra_pte() and addition of pmd flavor
Update populate_extra_pte() to return pointer to the pte_t for the
specified address and add populate_extra_pmd() which only populates
till the pmd and returns pointer to the pmd entry for the address.
For 64bit, pud/pmd/pte fill functions are separated out from
set_pte_vaddr[_pud]() and used for set_pte_vaddr[_pud]() and
populate_extra_{pte|pmd}().
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: cleaner and consistent bootmem wrapping
By setting CONFIG_HAVE_ARCH_BOOTMEM_NODE, archs can define
arch-specific wrappers for bootmem allocation. However, this is done
a bit strangely in that only the high level convenience macros can be
changed while lower level, but still exported, interface functions
can't be wrapped. This not only is messy but also leads to strange
situation where alloc_bootmem() does what the arch wants it to do but
the equivalent __alloc_bootmem() call doesn't although they should be
able to be used interchangeably.
This patch updates bootmem such that archs can override / wrap the
backend function - alloc_bootmem_core() instead of the highlevel
interface functions to allow simpler and consistent wrapping. Also,
HAVE_ARCH_BOOTMEM_NODE is renamed to HAVE_ARCH_BOOTMEM.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@saeurebad.de>
Impact: cleanup
Make x86_quirks support more transparent. The highlevel
methods are now named:
extern void x86_quirk_pre_intr_init(void);
extern void x86_quirk_intr_init(void);
extern void x86_quirk_trap_init(void);
extern void x86_quirk_pre_time_init(void);
extern void x86_quirk_time_init(void);
This makes it clear that if some platform extension has to
do something here that it is considered ... weird, and is
discouraged.
Also remove arch_hooks.h and move it into setup.h (and other
header files where appropriate).
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove dead code
Remove:
- pre_setup_arch_hook()
- mca_nmi_hook()
If needed they can be added back via an x86_quirk handler.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove unused/broken code
The Voyager subarch last built successfully on the v2.6.26 kernel
and has been stale since then and does not build on the v2.6.27,
v2.6.28 and v2.6.29-rc5 kernels.
No actual users beyond the maintainer reported this breakage.
Patches were sent and most of the fixes were accepted but the
discussion around how to do a few remaining issues cleanly
fizzled out with no resolution and the code remained broken.
In the v2.6.30 x86 tree development cycle 32-bit subarch support
has been reworked and removed - and the Voyager code, beyond the
build problems already known, needs serious and significant
changes and probably a rewrite to support it.
CONFIG_X86_VOYAGER has been marked BROKEN then. The maintainer has
been notified but no patches have been sent so far to fix it.
While all other subarchs have been converted to the new scheme,
voyager is still broken. We'd prefer to receive patches which
clean up the current situation in a constructive way, but even in
case of removal there is no obstacle to add that support back
after the issues have been sorted out in a mutually acceptable
fashion.
So remove this inactive code for now.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If BIOS hands over the control to OS in legacy xapic mode, select
legacy xapic related ops in the early apic probe and shift to x2apic
ops later in the boot sequence, only after enabling x2apic mode.
If BIOS hands over the control in x2apic mode, select x2apic related
ops in the early apic probe.
This fixes the early boot panic, where we were selecting x2apic ops,
while the cpu is still in legacy xapic mode.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Rename TASK_SIZE64 to TASK_SIZE_MAX, and provide the
define on 32-bit too. (mapped to TASK_SIZE)
This allows 32-bit code to make use of the (former-) TASK_SIZE64
symbol as well, in a clean way.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: keep kernel text read only
Because dynamic ftrace converts the calls to mcount into and out of
nops at run time, we needed to always keep the kernel text writable.
But this defeats the point of CONFIG_DEBUG_RODATA. This patch converts
the kernel code to writable before ftrace modifies the text, and converts
it back to read only afterward.
The kernel text is converted to read/write, stop_machine is called to
modify the code, then the kernel text is converted back to read only.
The original version used SYSTEM_STATE to determine when it was OK
or not to change the code to rw or ro. Andrew Morton pointed out that
using SYSTEM_STATE is a bad idea since there is no guarantee to what
its state will actually be.
Instead, I moved the check into the set_kernel_text_* functions
themselves, and use a local variable to determine when it is
OK to change the kernel text RW permissions.
[ Update: Ingo Molnar suggested moving the prototypes to cacheflush.h ]
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: use new dynamic allocator, unified access to static/dynamic
percpu memory
Convert to the new dynamic percpu allocator.
* implement populate_extra_pte() for both 32 and 64
* update setup_per_cpu_areas() to use pcpu_setup_static()
* define __addr_to_pcpu_ptr() and __pcpu_ptr_to_addr()
* define config HAVE_DYNAMIC_PER_CPU_AREA
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: cleanup, performance enhancement
The machine check poller is diverging more and more from the fatal
exception handler. Instead of adding more special cases separate the code
paths completely. The corrected poll path is actually quite simple,
and this doesn't result in much code duplication.
This makes both handlers much easier to read and results in
cleaner code flow. The exception handler now only needs to care
about uncorrected errors, which also simplifies the handling of multiple
errors. The corrected poller also now always runs in standard interrupt
context and does not need to do anything special to handle NMI context.
Minor behaviour changes:
- MCG status is now not cleared on polling.
- Only the banks which had corrected errors get cleared on polling
- The exception handler only clears banks with errors now
v2: Forward port to new patch order. Add "uc" argument.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Impact: cleanup
This merely factors out duplicated code to set up
the initial struct mce state into a single function.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Impact: cleanup
There was an attempt to bring build-time checking for
missed ENTRY_X86/END_X86 and KPROBE... pairs. Using
them will add messy in code. Get just rid of them.
This commit could be easily restored if the need appear
in future.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If the code is time critical and this entry is called
from other places we use ENTRY to have it globally defined
and especially aligned.
Contrary we have some snippets which are size
critical. So we use plane ".globl name; name:"
directive. Introduce GLOBAL macro for this.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
What's happening is that the assertion in mm/page_alloc.c:move_freepages()
is triggering:
BUG_ON(page_zone(start_page) != page_zone(end_page));
Once I knew this is what was happening, I added some annotations:
if (unlikely(page_zone(start_page) != page_zone(end_page))) {
printk(KERN_ERR "move_freepages: Bogus zones: "
"start_page[%p] end_page[%p] zone[%p]\n",
start_page, end_page, zone);
printk(KERN_ERR "move_freepages: "
"start_zone[%p] end_zone[%p]\n",
page_zone(start_page), page_zone(end_page));
printk(KERN_ERR "move_freepages: "
"start_pfn[0x%lx] end_pfn[0x%lx]\n",
page_to_pfn(start_page), page_to_pfn(end_page));
printk(KERN_ERR "move_freepages: "
"start_nid[%d] end_nid[%d]\n",
page_to_nid(start_page), page_to_nid(end_page));
...
And here's what I got:
move_freepages: Bogus zones: start_page[2207d0000] end_page[2207dffc0] zone[fffff8103effcb00]
move_freepages: start_zone[fffff8103effcb00] end_zone[fffff8003fffeb00]
move_freepages: start_pfn[0x81f600] end_pfn[0x81f7ff]
move_freepages: start_nid[1] end_nid[0]
My memory layout on this box is:
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x0081ff5d
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[8] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00020000
[ 0.000000] 1: 0x00800000 -> 0x0081f7ff
[ 0.000000] 1: 0x0081f800 -> 0x0081fe50
[ 0.000000] 1: 0x0081fed1 -> 0x0081fed8
[ 0.000000] 1: 0x0081feda -> 0x0081fedb
[ 0.000000] 1: 0x0081fedd -> 0x0081fee5
[ 0.000000] 1: 0x0081fee7 -> 0x0081ff51
[ 0.000000] 1: 0x0081ff59 -> 0x0081ff5d
So it's a block move in that 0x81f600-->0x81f7ff region which triggers
the problem.
This patch:
Declaration of early_pfn_to_nid() is scattered over per-arch include
files, and it seems it's complicated to know when the declaration is used.
I think it makes fix-for-memmap-init not easy.
This patch moves all declaration to include/linux/mm.h
After this,
if !CONFIG_NODES_POPULATES_NODE_MAP && !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-> Use static definition in include/linux/mm.h
else if !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-> Use generic definition in mm/page_alloc.c
else
-> per-arch back end function will be called.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: David Miller <davem@davemlloft.net>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is nothing really arch specific of the push and pop functions
used by the function graph tracer. This patch moves them to generic
code.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Intel AES-NI is a new set of Single Instruction Multiple Data (SIMD)
instructions that are going to be introduced in the next generation of
Intel processor, as of 2009. These instructions enable fast and secure
data encryption and decryption, using the Advanced Encryption Standard
(AES), defined by FIPS Publication number 197. The architecture
introduces six instructions that offer full hardware support for
AES. Four of them support high performance data encryption and
decryption, and the other two instructions support the AES key
expansion procedure.
The white paper can be downloaded from:
http://softwarecommunity.intel.com/isn/downloads/intelavx/AES-Instructions-Set_WP.pdf
AES may be used in soft_irq context, but MMX/SSE context can not be
touched safely in soft_irq context. So in_interrupt() is checked, if
in IRQ or soft_irq context, the general x86_64 implementation are used
instead.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Intel AES-NI AES acceleration instructions touch XMM state, to use
that in soft_irq context, general x86 AES implementation is used as
fallback. The first parameter is changed from struct crypto_tfm * to
struct crypto_aes_ctx * to make it easier to deal with 16 bytes
alignment requirement of AES-NI implementation.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Impact: low priority bug fix
This removes part of a a patch I added myself some time ago. After some
consideration the patch was a bad idea. In particular it stopped machine check
exceptions during code patching.
To quote the comment:
* MCEs only happen when something got corrupted and in this
* case we must do something about the corruption.
* Ignoring it is worse than a unlikely patching race.
* Also machine checks tend to be broadcast and if one CPU
* goes into machine check the others follow quickly, so we don't
* expect a machine check to cause undue problems during to code
* patching.
So undo the machine check related parts of
8f4e956b31 NMIs are still disabled.
This only removes code, the only additions are a new comment.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, vm86: fix preemption bug
x86, olpc: fix model detection without OFW
x86, hpet: fix for LS21 + HPET = boot hang
x86: CPA avoid repeated lazy mmu flush
x86: warn if arch_flush_lazy_mmu_cpu is called in preemptible context
x86/paravirt: make arch_flush_lazy_mmu/cpu disable preemption
x86, pat: fix warn_on_once() while mapping 0-1MB range with /dev/mem
x86/cpa: make sure cpa is safe to call in lazy mmu mode
x86, ptrace, mm: fix double-free on race
Impact: Cleanup; fix inappropriate macro use
ISA addresses on x86 are mapped 1:1 with the physical address space.
Since the ISA address space is only 24 bits (32 for VLB or LPC) it
will always fit in an unsigned int, and at least in the aha1542 driver
using a wider type would cause an undesirable promotion. Hence
explicitly cast the ISA bus addresses to unsigned int.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Impact: cleanup
Now that all APIC code is consolidated there's nothing 'gen' about
apics anymore - so rename 'struct genapic' to 'struct apic'.
This shortens the code and is nicer to read as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
- misc other cleanups that change the md5 signature
- consolidate global variables
- remove unnecessary __numaq_mps_oem_check() wrapper
- make numaq_mps_oem_check static
- update copyrights
- misc other cleanups pointed out by checkpatch
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Reduce the number of include files to worry about.
Also, most of the users of APIC facilities had to
include genapic.h already, which embedded apic.h,
so the distinction was meaningless.
[ include apic.h from genapic.h for compatibility. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
make it simpler, don't need have one extra struct.
v2: fix the sgi_uv build
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
so could deselect x2apic
and INTR_REMAP will select x2apic
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When testing for a dom0/initial/privileged domain, make sure the
predicate evaluates to a compile-time 0 if CONFIG_XEN_DOM0 isn't
enabled. This will make most of the dom0 code evaporate without
much more effort.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
User space can request hardware and/or software time stamping.
Reporting of the result(s) via a new control message is enabled
separately for each field in the message because some of the
fields may require additional computation and thus cause overhead.
User space can tell the different kinds of time stamps apart
and choose what suits its needs.
When a TX timestamp operation is requested, the TX skb will be cloned
and the clone will be time stamped (in hardware or software) and added
to the socket error queue of the skb, if the skb has a socket
associated with it.
The actual TX timestamp will reach userspace as a RX timestamp on the
cloned packet. If timestamping is requested and no timestamping is
done in the device driver (potentially this may use hardware
timestamping), it will be done in software after the device's
start_hard_xmit routine.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kconfig symbols are not available in userspace, and are not stripped by
headers-install. Avoid their use by adding #defines in <asm/kvm.h> to
suit each architecture.
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit 976e8f677e ("x86: asm/io.h: unify
virt_to_phys/phys_to_virt") changed the return of virt_to_phys from long
to phys_addr_t which is unsigned long long on a PAE platform.
So, I could suggest a fix below since isa addresses may never be above
32 bits.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: avoid access to percpu vars in preempible context
They are intended to be used whenever there's the possibility
that there's some stale state which is going to be overwritten
with a queued update, or to force a state change when we may be
in lazy mode. Either way, we could end up calling it with
preemption enabled, so wrap the functions in their own little
preempt-disable section so they can be safely called in any
context (though preemption should never be enabled if we're actually
in a lazy state).
(Move out of line to avoid #include dependencies.)
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Jeff Mahoney reported:
> With Suse's hwinfo tool, on -tip:
> WARNING: at arch/x86/mm/pat.c:637 reserve_pfn_range+0x5b/0x26d()
reserve_pfn_range() is not tracking the memory range below 1MB
as non-RAM and as such is inconsistent with similar checks in
reserve_memtype() and free_memtype()
Rename the pagerange_is_ram() to pat_pagerange_is_ram() and add the
"track legacy 1MB region as non RAM" condition.
And also, fix reserve_pfn_range() to return -EINVAL, when the pfn
range is RAM. This is to be consistent with this API design.
Reported-and-tested-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Fixes warning
Fix uv.h struct usage:
arch/x86/include/asm/uv/uv.h:16: warning: 'struct mm_struct' declared inside parameter list
arch/x86/include/asm/uv/uv.h:16: warning: its scope is only this definition or declaration, which is probably not what you want
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Impact: cleanup
With the recent changes in the 32-bit code to make system calls which
use struct pt_regs take a pointer, sys_rt_sigreturn() have become
identical between 32 and 64 bits, and both are empty wrappers around
do_rt_sigreturn(). Remove both wrappers and rename both to
sys_rt_sigreturn().
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
pgtable*.h is intended for definitions relating to actual pagetables
and their entries, so move all the definitions for
(pte|pmd|pud|pgd)(val)?_t to the appropriate pgtable*.h headers.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
The kernel tends to call definition-only headers *_types.h, so rename
the x86 page/pgtable headers accordingly.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Some syscalls need to access the pt_regs structure, either to copy
user register state or to modifiy it. This patch adds stubs to load
the address of the pt_regs struct into the %eax register, and changes
the syscalls to take the pointer as an argument instead of relying on
the assumption that the pt_regs structure overlaps the function
arguments.
Drop the use of regparm(1) due to concern about gcc bugs, and to move
in the direction of the eventual removal of regparm(0) for asmlinkage.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* commit 'remotes/tip/x86/paravirt': (175 commits)
xen: use direct ops on 64-bit
xen: make direct versions of irq_enable/disable/save/restore to common code
xen: setup percpu data pointers
xen: fix 32-bit build resulting from mmu move
x86/paravirt: return full 64-bit result
x86, percpu: fix kexec with vmlinux
x86/vmi: fix interrupt enable/disable/save/restore calling convention.
x86/paravirt: don't restore second return reg
xen: setup percpu data pointers
x86: split loading percpu segments from loading gdt
x86: pass in cpu number to switch_to_new_gdt()
x86: UV fix uv_flush_send_and_wait()
x86/paravirt: fix missing callee-save call on pud_val
x86/paravirt: use callee-saved convention for pte_val/make_pte/etc
x86/paravirt: implement PVOP_CALL macros for callee-save functions
x86/paravirt: add register-saving thunks to reduce caller register pressure
x86/paravirt: selectively save/restore regs around pvops calls
x86: fix paravirt clobber in entry_64.S
x86/pvops: add a paravirt_ident functions to allow special patching
xen: move remaining mmu-related stuff into mmu.c
...
Conflicts:
arch/x86/mach-voyager/voyager_smp.c
arch/x86/mm/fault.c
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
ptrace, x86: fix the usage of ptrace_fork()
i8327: fix outb() parameter order
x86: fix math_emu register frame access
x86: math_emu info cleanup
x86: include correct %gs in a.out core dump
x86, vmi: put a missing paravirt_release_pmd in pgd_dtor
x86: find nr_irqs_gsi with mp_ioapic_routing
x86: add clflush before monitor for Intel 7400 series
x86: disable intel_iommu support by default
x86: don't apply __supported_pte_mask to non-present ptes
x86: fix grammar in user-visible BIOS warning
x86/Kconfig.cpu: make Kconfig help readable in the console
x86, 64-bit: print DMI info in the oops trace
Some syscalls need to access the pt_regs structure, either to copy
user register state or to modifiy it. This patch adds stubs to load
the address of the pt_regs struct into the %eax register, and changes
the syscalls to regparm(1) to receive the pt_regs pointer as the
first argument.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The generic exception handler (error_code) passes in the pt_regs
pointer and the error code (unused in this case). The commit
"x86: fix math_emu register frame access" changed this to pass by
value, which doesn't work correctly with stack protector enabled.
Change it back to use the pt_regs pointer.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix x86_32 stack protector
Brian Gerst found out that %gs was being initialized to stack_canary
instead of stack_canary - 20, which basically gave the same canary
value for all threads. Fixing this also exposed the following bugs.
* cpu_idle() didn't call boot_init_stack_canary()
* stack canary switching in switch_to() was being done too late making
the initial run of a new thread use the old stack canary value.
Fix all of them and while at it update comment in cpu_idle() about
calling boot_init_stack_canary().
Reported-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: stack protector for x86_32
Implement stack protector for x86_32. GDT entry 28 is used for it.
It's set to point to stack_canary-20 and have the length of 24 bytes.
CONFIG_CC_STACKPROTECTOR turns off CONFIG_X86_32_LAZY_GS and sets %gs
to the stack canary segment on entry. As %gs is otherwise unused by
the kernel, the canary can be anywhere. It's defined as a percpu
variable.
x86_32 exception handlers take register frame on stack directly as
struct pt_regs. With -fstack-protector turned on, gcc copies the
whole structure after the stack canary and (of course) doesn't copy
back on return thus losing all changed. For now, -fno-stack-protector
is added to all files which contain those functions. We definitely
need something better.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: pt_regs changed, lazy gs handling made optional, add slight
overhead to SAVE_ALL, simplifies error_code path a bit
On x86_32, %gs hasn't been used by kernel and handled lazily. pt_regs
doesn't have place for it and gs is saved/loaded only when necessary.
In preparation for stack protector support, this patch makes lazy %gs
handling optional by doing the followings.
* Add CONFIG_X86_32_LAZY_GS and place for gs in pt_regs.
* Save and restore %gs along with other registers in entry_32.S unless
LAZY_GS. Note that this unfortunately adds "pushl $0" on SAVE_ALL
even when LAZY_GS. However, it adds no overhead to common exit path
and simplifies entry path with error code.
* Define different user_gs accessors depending on LAZY_GS and add
lazy_save_gs() and lazy_load_gs() which are noop if !LAZY_GS. The
lazy_*_gs() ops are used to save, load and clear %gs lazily.
* Define ELF_CORE_COPY_KERNEL_REGS() which always read %gs directly.
xen and lguest changes need to be verified.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
On x86_32, %gs is handled lazily. It's not saved and restored on
kernel entry/exit but only when necessary which usually is during task
switch but there are few other places. Currently, it's done by
calling savesegment() and loadsegment() explicitly. Define
get_user_gs(), set_user_gs() and task_user_gs() and use them instead.
While at it, clean up register access macros in signal.c.
This cleans up code a bit and will help future changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: misc udpate
* wrap content with CONFIG_CC_STACK_PROTECTOR so that other arch files
can include it directly
* add missing includes
This will help future changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
do_device_not_available() is the handler for #NM and it declares that
it takes a unsigned long and calls math_emu(), which takes a long
argument and surprisingly expects the stack frame starting at the zero
argument would match struct math_emu_info, which isn't true regardless
of configuration in the current code.
This patch makes do_device_not_available() take struct pt_regs like
other exception handlers and initialize struct math_emu_info with
pointer to it and pass pointer to the math_emu_info to math_emulate()
like normal C functions do. This way, unless gcc makes a copy of
struct pt_regs in do_device_not_available(), the register frame is
correctly accessed regardless of kernel configuration or compiler
used.
This doesn't fix all math_emu problems but it at least gets it
somewhat working.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
enable_IO_APIC() is defined for both 32- and 64-bit x86, so it should
be declared for both.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Unstatic ioapic_write_entry and setup_ioapic_entry functions so that
the Xen code can do its own ioapic routing setup.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Add mp_find_ioapic_pin() to find an IO APIC's specific pin from a GSI,
and use this function within acpi/boot. Make it non-static so other
code can use it too.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Architectures other than mips and x86 are not using ticket spinlocks.
Therefore, the contention on the lock is meaningless, since there is
nobody known to be waiting on it (arguably /fairly/ unfair locks).
Dummy it out to return 0 on other architectures.
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: cleanup
* Come on, struct info? s/struct info/struct math_emu_info/
* Use struct pt_regs and kernel_vm86_regs instead of defining its own
register frame structure.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: dump the correct %gs into a.out core dump
aout_dump_thread() read %gs but didn't include it in core dump. Fix
it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
__acpi_map_table() effectively reimplements early_ioremap(). Rather
than have that duplication, just implement it in terms of
early_ioremap().
However, unlike early_ioremap(), __acpi_map_table() just maintains a
single mapping which gets replaced each call, and has no corresponding
unmap function. Implement this by just removing the previous mapping
each time its called. Unfortunately, this will leave a stray mapping
at the end.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: find right nr_irqs_gsi on some systems.
One test-system has gap between gsi's:
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfeafd000] gsi_base[48])
[ 0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfeafd000, GSI 48-54
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfeafc000] gsi_base[56])
[ 0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfeafc000, GSI 56-62
...
[ 0.000000] nr_irqs_gsi: 38
So nr_irqs_gsi is not right. some irq for MSI will overwrite with io_apic.
need to get that with acpi_probe_gsi when acpi io_apic is used
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rather than overloading vectors for event channels, take full
responsibility for mapping an event channel to irq directly. With
this patch Xen has its own irq allocator.
When the kernel gets an event channel upcall, it maps the event
channel number to an irq and injects it into the normal interrupt
path.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With the differences in interrupt handling hoisted into handle_irq(),
do_IRQ is more or less identical between 32 and 64 bit, so unify it.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Xen uses a different interrupt path, so introduce handle_irq() to
allow interrupts to be inserted into the normal interrupt path. This
is handled slightly differently on 32 and 64-bit.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- pmd_flags() needs to be available on 2-levels too
- provide pud_large() wrapper as well
- include page.h - it provides basic types relied on by pgtable.h
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The p?d_page() methods still rely on highlevel types and methods:
In file included from arch/x86/kernel/early_printk.c:18:
/home/mingo/tip/arch/x86/include/asm/pgtable.h: In function ‘pmd_page’:
/home/mingo/tip/arch/x86/include/asm/pgtable.h:516: error: implicit declaration of function â__pfn_to_sectionâ
/home/mingo/tip/arch/x86/include/asm/pgtable.h:516: error: initialization makes pointer from integer without a cast
/home/mingo/tip/arch/x86/include/asm/pgtable.h:516: error: implicit declaration of function ‘__section_mem_map_addr’
/home/mingo/tip/arch/x86/include/asm/pgtable.h:516: error: return makes pointer from integer without a cast
So convert them to macros and document the type dependency.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For Intel 7400 series CPUs, the recommendation is to use a clflush on the
monitored address just before monitor and mwait pair [1].
This clflush makes sure that there are no false wakeups from mwait when the
monitored address was recently written to.
[1] "MONITOR/MWAIT Recommendations for Intel Xeon Processor 7400 series"
section in specification update document of 7400 series
http://download.intel.com/design/xeon/specupdt/32033601.pdf
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup and bug fix
Use the linker to create symbols for certain per-cpu variables
that are offset by __per_cpu_load. This allows the removal of
the runtime fixup of the GDT pointer, which fixes a bug with
resume reported by Jiri Slaby.
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: find right nr_irqs_gsi on some systems.
One test-system has gap between gsi's:
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfeafd000] gsi_base[48])
[ 0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfeafd000, GSI 48-54
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfeafc000] gsi_base[56])
[ 0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfeafc000, GSI 56-62
...
[ 0.000000] nr_irqs_gsi: 38
So nr_irqs_gsi is not right. some irq for MSI will overwrite with io_apic.
need to get that with acpi_probe_gsi when acpi io_apic is used
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: unify identical code
asm/io_32.h and _64.h have identical prototypes for the ioremap family
of functions. The 32-bit header had a more descriptive comment.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Impact: unify identical code
asm/io_32.h and _64.h has functionally identical definitions for
virt_to_phys, phys_to_virt, page_to_phys, and the isa_* variants, so
just unify them.
The only slightly functional change is using phys_addr_t for the
physical address argument and return val.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
The _none test is done differently for every level of the pagetable.
Standardize them by:
1: Use the native_X_val to extract the raw entry, with no need to go
via paravirt_ops, diff -r 1d0646d0d319 arch/x86/include/asm/pgtable.h, and
2: Compare with 0 rather than using a boolean !, since they are actually values
and not booleans.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Add pgd/pud/pmd_flags which are analogous to pte_flags, and use them
where-ever we only care about testing the flags portions of the
respective entries.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Impact: cleanup
Unify pmd_pfn. Unfortunately it can't be demacroed because it has a
cyclic dependency on linux/mm.h:page_to_nid().
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Impact: cleanup
only leave _default_ipi_xx etc in .h
Beyond the cleanup factor, this saves a bit of code size as well:
text data bss dec hex filename
7281931 1630144 1463304 10375379 9e50d3 vmlinux.before
7281753 1630144 1463304 10375201 9e5021 vmlinux.after
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
disable_ioapic_setup() in init/main.c is ugly as the function is
x86-specific. The #ifdef inline prototype there is ugly too.
Replace it with a generic arch_disable_smp_support() function - which
has a weak alias for non-x86 architectures and for non-ioapic x86 builds.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On an x86 system which doesn't support global mappings,
__supported_pte_mask has _PAGE_GLOBAL clear, to make sure it never
appears in the PTE. pfn_pte() and so on will enforce it with:
static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot)
{
return __pte((((phys_addr_t)page_nr << PAGE_SHIFT) |
pgprot_val(pgprot)) & __supported_pte_mask);
}
However, we overload _PAGE_GLOBAL with _PAGE_PROTNONE on non-present
ptes to distinguish them from swap entries. However, applying
__supported_pte_mask indiscriminately will clear the bit and corrupt the
pte.
I guess the best fix is to only apply __supported_pte_mask to present
ptes. This seems like the right solution to me, as it means we can
completely ignore the issue of overlaps between the present pte bits and
the non-present pte-as-swap entry use of the bits.
__supported_pte_mask contains the set of flags we support on the
current hardware. We also use bits in the pte for things like
logically present ptes with no permissions, and swap entries for
swapped out pages. We should only apply __supported_pte_mask to
present ptes, because otherwise we may destroy other information being
stored in the ptes.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: cleanup
In __put_user_size() macro errret is used for error value.
But if size is 8, errret isn't passed to__put_user_asm_u64().
This behavior is inconsistent.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Impact: reduce kernel BSS size by 7 pages, improve code readability
Two page tables are used in current x86_64 kexec implementation. One
is used to jump from kernel virtual address to identity map address,
the other is used to map all physical memory. In fact, on x86_64,
there is no conflict between kernel virtual address space and physical
memory space, so just one page table is sufficient. The page table
pages used to map control page are dynamically allocated to save
memory if kexec image is not loaded. ASM code used to map control page
is replaced by C code too.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: Bug fix
A hunk went missing in the original patch, and callee-save callsites were
not marked as returning the upper 32-bit of result, causing Badness.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
fix the following 'make headers_check' warning:
usr/include/asm/setup.h:16: extern's make no sense in userspace
usr/include/asm/setup.h:17: extern's make no sense in userspace
usr/include/asm/setup.h:23: extern's make no sense in userspace
usr/include/asm/setup.h:24: extern's make no sense in userspace
usr/include/asm/setup.h:51: extern's make no sense in userspace
usr/include/asm/setup.h:52: extern's make no sense in userspace
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
fix the following 'make headers_check' warning:
usr/include/asm/prctl.h:10: extern's make no sense in userspace
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Impact: bugfix
In the 32-bit calling convention, %eax:%edx is used to return 64-bit
values. Don't save and restore %edx around wrapped functions, or they
can't return a full 64-bit result.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: split out a function, no functional change
Xen needs to be able to access percpu data from very early on. For
various reasons, it cannot also load the gdt at that time. It does,
however, have a pefectly functional gdt at that point, so there's no
pressing need to reload the gdt.
Split the function to load the segment registers off, so Xen can call
it directly.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: cleanup, prepare for xen boot fix.
Xen needs to call this function very early to setup the GDT and
per-cpu segments. Remove the call to smp_processor_id() and just
pass in the cpu number.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>