Commit graph

148 commits

Author SHA1 Message Date
James Bottomley
142009a3df [SCSI] aic7xxx: cap maxsync according to correct card limits
Not doing this can cause cards less than u160 capable to send out PPR
offers to devices they can't then deliver on ... causing some devices to
get a bit confused.  Fix by capping the start syncrate at the
appropriate level according to the card capabilities.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31 10:44:26 -05:00
James Bottomley
0f82cb9211 [SCSI] aic79xx, aic7xxx: Fix incorrect width setting
Wide transfers are required for every setting of PPR apart from QAS.
It seems the DV code starts at the minimum, which turns on DT and Wide
regardless of the setting of max_width.  Redo the PPR and period
setting routines to respect max_width (i.e. start at period = 10 if it
is zero).

This fixes bugzilla 8366

Acked-by: "Freels, James D." <freelsjd@ornl.gov>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-27 09:20:20 -04:00
Linus Torvalds
bc06cffdec Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (166 commits)
  [SCSI] ibmvscsi: convert to use the data buffer accessors
  [SCSI] dc395x: convert to use the data buffer accessors
  [SCSI] ncr53c8xx: convert to use the data buffer accessors
  [SCSI] sym53c8xx: convert to use the data buffer accessors
  [SCSI] ppa: coding police and printk levels
  [SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc
  [SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c
  [SCSI] remove the dead CYBERSTORMIII_SCSI option
  [SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA
  [SCSI] Clean up scsi_add_lun a bit
  [SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs
  [SCSI] sni_53c710: Cleanup
  [SCSI] qla4xxx: Fix underrun/overrun conditions
  [SCSI] megaraid_mbox: use mutex instead of semaphore
  [SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation.
  [SCSI] qla2xxx: update version to 8.02.00-k1.
  [SCSI] qla2xxx: add support for NPIV
  [SCSI] stex: use resid for xfer len information
  [SCSI] Add Brownie 1200U3P to blacklist
  [SCSI] scsi.c: convert to use the data buffer accessors
  ...
2007-07-15 16:51:54 -07:00
Yoann Padioleau
632155e659 potential parse error in ifdef
I have made a tool to parse the kernel that does not pre-process the
source.  That means that my parser tries to parse all the code, including
code in the #else branch or code that is not often compiled because the
driver is not very used (or not used at all).  So, my parser sometimes
reports parse error not originally detected by gcc.  Here is my (first)
patch.

[akpm@linux-foundation.org: fix amd8111e.c]
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Acked-by: Matthew Wilcox <matthew@wil.cx>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: James Bottomley <James.Bottomley@steeleye.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-01 08:18:27 -07:00
James Bottomley
5bc65793cb [SCSI] Merge up to linux-2.6 head
Conflicts:

	drivers/scsi/jazz_esp.c

Same changes made by both SCSI and SPARC trees: problem with UTF-8
conversion in the copyright.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30 23:57:05 -05:00
FUJITA Tomonori
4c688fc7df [SCSI] aic79xx: convert to use the data buffer accessors
- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-26 16:30:12 -05:00
FUJITA Tomonori
3a57c4a5aa [SCSI] aic7xxx: convert to use the data buffer accessors
- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-26 16:30:08 -05:00
James Bottomley
f45ffaec2e [SCSI] aic7xxx: fix aicasm build failure with gcc-3.4.6
On Tue, 2007-05-22 at 06:51 -0500, Bob Tracy wrote:
> Second try: originally reported this back on April 17th.  2.6.X
> kernel builds started failing after I upgraded my compiler from
> gcc-3.3.X to gcc-3.4.6:
>
> make -C drivers/scsi/aic7xxx/aicasm
> (...)
> gcc -I/usr/include -I. aicasm.c aicasm_symbol.c aicasm_gram.c aicasm_macro_gram.c aicasm_scan.c aicasm_macro_scan.c -o aicasm -ldb
> aicasm_gram.y:1948: error: conflicting types for 'yyerror'
> aicasm_gram.tab.c:3004: error: previous implicit declaration of 'yyerror' was here
> aicasm_macro_gram.y:162: error: conflicting types for 'mmerror'
> aicasm_macro_gram.tab.c:1196: error: previous implicit declaration of 'mmerror' was here

Fix is to add a prototype for yyerror and mmerror to the relevant files.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-22 14:08:59 -05:00
Michael Opdenacker
59c51591a0 Fix occurrences of "the the "
Signed-off-by: Michael Opdenacker <michael@free-electrons.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 08:57:56 +02:00
Randy Dunlap
e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Adrian Bunk
e3e0ca5143 [SCSI] aic7xxx: make functions static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-01 10:17:10 -05:00
Robert P. J. Day
b73c3d7786 [SCSI] Remove some unused SCSI-related kernel config variables.
Remove the unused SCSI-related kernel config variables

	SCSI_NCR53C8XX_PROFILE_SUPPORT
	SCSI_NCR53C8XX_PROFILE
	53C700_IO_MAPPED
	AIC79XX_ENABLE_RD_STRM
	AIC7XXX_PROBE_EISA_VL

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-01 10:11:16 -05:00
Rolf Eike Beer
e790b3dd2b [SCSI] aic79xx: remove extra newline from info message
This extra newline character introduces a completely empty line in dmesg as
the calling function itself adds a newline.

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-16 10:13:53 -06:00
Hannes Reinecke
19966769f9 [SCSI] aic79xx: use dma_get_required_mask()
As originally noted by Frederic Temporelli, the aic79xx supports 64
bit addressing, but the initialization code of the driver is wrong: it
tests the available memory size instead of testing the maximum
available memory address.

This patch uses the correct dma_get_required_mask() macros to
determine the correct addressing method.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Xavier Bru <xavier.bru@bull.net>
CC: Frederic Temporelli <frederic.temporelli@bull.net>

cosmetic fixes
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-10 12:58:06 -06:00
Mariusz Kozlowski
5504802117 [SCSI] aic79xx: fix bracket mismatch in unused macro
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-07 18:35:51 -05:00
Adrian Bunk
a76106afbe [SCSI] aic79xx: make ahd_match_scb() static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-07 18:30:19 -05:00
Salyzyn, Mark
d32adcb85c [SCSI] aic79xx: Add ASC-29320LPE ids to driver
Simple patch to add the new PCIe version of the 29320 card.

Signed-off: Mark Salyzyn <Mark_Salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05 14:17:17 -06:00
Hannes Reinecke
d6b9ccbbeb [SCSI] aic79xx: Print out signalling
This is a cross-port of a similar patch for aic7xxx;
only it's a bit simpler here as we don't support HVD
and all controller actually implement this register.
I hope.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:14:50 -07:00
Hannes Reinecke
9080063f52 [SCSI] aic7xxx: Remove slave_destroy
This is a cross-port from aic79xx; we still hit the occasional
BUG_ON in slave_destroy. And again we don't really need the
slave_destroy callback nor the ahc_linux_target structure
at all.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:14:46 -07:00
Hannes Reinecke
843822ad63 [SCSI] aic79xx: set precompensation
aic79xx has a special 'iocell' chip which handles the precompensation.
If it's set via DV we should make sure to set the chip correctly, too.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:14:42 -07:00
Hannes Reinecke
8883c1f182 [SCSI] aic79xx: Fixup external device reset
Whenever an external device is resetted we really have to take
care to keep the channel in sync. Just notifying SCSI-ML and retry
is not enough as we have to make sure the SCSI bus is not getting
confused, either.
So whenever we detect an external reset we rewrite the command to
TUR, disable packetized command and notify the internal engine
that an abort has happened. This way we trigger a proper bus
reset sequence and all devices will be renegotiated properly.
Kudos to Justin Gibbs and Luben Tuikov for this idea.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:14:38 -07:00
Adrian Bunk
ca3c332393 [SCSI] aic79xx: make ahd_set_tags() static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:14:25 -07:00
Adrian Bunk
289fe5b1f9 [SCSI] aic7xxx: cleanups
- make needlessly global code static

- #if 0 the following unused global functions:
  - aic79xx_core.c: ahd_print_scb
  - aic79xx_core.c: ahd_suspend
  - aic79xx_core.c: ahd_resume
  - aic79xx_core.c: ahd_dump_scbs
  - aic79xx_osm.c: ahd_softc_comp

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:14:21 -07:00
Amol Lad
6d07cb71fd [SCSI] drivers/scsi: Handcrafted MIN/MAX macro removal
Cleanups done to use min/max macros from kernel.h.  Handcrafted MIN/MAX
macros are changed to use macros in kernel.h

[akpm@osdl.org: fix warning]
Signed-off-by: Amol Lad <amol@verismonetworks.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:14:17 -07:00
Hannes Reinecke
80f1443c66 [SCSI] aic7xxx: Adjust .max_sectors
According to the adaptec sources aic7xxx / aic79xx really can do
4MB transfers. So we should adjust .max_sectors.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:12:12 -07:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Linus Torvalds
97d41e90fe Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (54 commits)
  [SCSI] Initial Commit of qla4xxx
  [SCSI] raid class: handle component-add errors
  [SCSI] SCSI megaraid_sas: handle thrown errors
  [SCSI] SCSI aic94xx: handle sysfs errors
  [SCSI] SCSI st: fix error handling in module init, sysfs
  [SCSI] SCSI sd: fix module init/exit error handling
  [SCSI] SCSI osst: add error handling to module init, sysfs
  [SCSI] scsi: remove hosts.h
  [SCSI] scsi: Scsi_Cmnd convertion in aic7xxx_old.c
  [SCSI] megaraid_sas: sets ioctl timeout and updates version,changelog
  [SCSI] megaraid_sas: adds tasklet for cmd completion
  [SCSI] megaraid_sas: prints pending cmds before setting hw_crit_error
  [SCSI] megaraid_sas: function pointer for disable interrupt
  [SCSI] megaraid_sas: frame count optimization
  [SCSI] megaraid_sas: FW transition and q size changes
  [SCSI] qla2xxx: Update version number to 8.01.07-k2.
  [SCSI] qla2xxx: Stall mid-layer error handlers while rport is blocked.
  [SCSI] qla2xxx: Add MODULE_FIRMWARE tags.
  [SCSI] qla2xxx: Add support for host port state FC transport attribute.
  [SCSI] qla2xxx: Add support for fabric name FC transport attribute.
  ...
2006-10-04 18:57:35 -07:00
Matt LaPlante
095096038d Fix several typos in drivers/
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 22:31:37 +02:00
Denis Vlasenko
7b75b990e3 [SCSI] aic7xxx: fix byte I/O order in ahd_inw
Comment says "Read high byte first as some registers increment..."
but code doesn't guarantee that, I think:
	return ((ahd_inb(ahd, port+1) << 8) | ahd_inb(ahd, port));
Compiler can reorder it.

Make the order explicit.

Signed-off-by: Denis Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

Fixed rejections and added aic7xxx code
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-01 15:03:38 -05:00
Peter Zijlstra
6e9a4738c9 [PATCH] completions: lockdep annotate on stack completions
All on stack DECLARE_COMPLETIONs should be replaced by:
DECLARE_COMPLETION_ONSTACK

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:24 -07:00
Michael Tokarev
07563c711f [PATCH] EISA bus MODALIAS attributes support
Add modalias attribute support for the almost forgotten now EISA bus and
(at least some) EISA-aware modules.

The modalias entry looks like (for an 3c509 NIC):

 eisa:sTCM5093

and the in-module alias like:

 eisa:sTCM5093*

The patch moves struct eisa_device_id declaration from include/linux/eisa.h
to include/linux/mod_devicetable.h (so that the former now #includes the
latter), adds proper MODULE_DEVICE_TABLE(eisa, ...) statements for all
drivers with EISA IDs I found (some drivers already have that DEVICE_TABLE
declared), and adds recognision of __mod_eisa_device_table to
scripts/mod/file2alias.c so that proper modules.alias will be generated.

There's no support for /lib/modules/$kver/modules.eisamap, as it's not used
by any existing tools, and because with in-kernel modalias mechanism those
maps are obsolete anyway.

The rationale for this patch is:

 a) to make EISA bus to act as other busses with modalias
    support, to unify driver loading

 b) to foget about EISA finally - with this patch, kernel
    (who still supports EISA) will be the only one who knows
    how to choose the necessary drivers for this bus ;)

[akpm@osdl.org: fix the kbuild bit]
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Acked-the-net-bits-by: Jeff Garzik <jeff@garzik.org>
Acked-the-tulip-bit-by: Valerie Henson <val_henson@linux.intel.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:26:19 -07:00
Henrik Kretzschmar
dcbccbde00 [SCSI] pci_module_init conversion in scsi subsystem
Converts pci_module_init() to pci_register_driver() in the scsi subsys on
23 drivers which only return the value of pci_module_init().

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-26 11:35:32 -07:00
Doug Ledford
cf2b5d3fca [SCSI] aic7xxx: pause sequencer before touching SBLKCTL
Some cards need to pause the sequencer before the SBLKCTL register is
touched.  This fixes a PCI related oops seen on powerpc macs with this
card caused by trying to ascertain the bus signalling before beginning
domain validation.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 17:48:11 -05:00
James Bottomley
3e3c60e3a8 [SCSI] aic7xxx: avoid checking SBLKCTL register for certain cards
For cards that don't support LVD, checking the SBLKCTL register to
determine the bus singalling doesn't work.  So, check that the card
supports LVD first (AHC_ULTRA2) before checking the register.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 17:39:34 -05:00
James Bottomley
8ce7a9c159 Merge ../linux-2.6 2006-08-27 21:59:59 -05:00
Randy Dunlap
2b6ee9b529 [SCSI] aic7*: cleanup MODULE_PARM_DESC strings
Modify beginning string to be more readable.  Remove one trailing newline.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 13:41:08 -07:00
Sam Ravnborg
dba654d150 kbuild: hardcode value of YACC&LEX for aic7-triple-x
When we introduced -rR then aic7xxx no loger could pick up definition
of YACC&LEX from make - so do it explicit now.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-08-01 11:32:46 +02:00
Linus Torvalds
00ab956f2f Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (38 commits)
  [SCSI] More buffer->request_buffer changes
  [SCSI] mptfusion: bump version to 3.04.01
  [SCSI] mptfusion: misc fix's
  [SCSI] mptfusion: firmware download boot fix's
  [SCSI] mptfusion: task abort fix's
  [SCSI] mptfusion: sas nexus loss support
  [SCSI] mptfusion: sas loginfo update
  [SCSI] mptfusion: mptctl panic when loading
  [SCSI] mptfusion: sas enclosures with smart drive
  [SCSI] NCR_D700: misc fixes (section and argument ordering)
  [SCSI] scsi_debug: must_check fixes
  [SCSI] scsi_transport_sas: kill the use of channel 
  [SCSI] scsi_transport_sas: add expander backlink
  [SCSI] hide EH backup data outside the scsi_cmnd
  [SCSI] ibmvscsi: handle inactive SCSI target during probe
  [SCSI] ibmvscsi: allocate lpevents for ibmvscsi on iseries
  [SCSI] aic7[9x]xx: Remove last vestiges of reverse_scan
  [SCSI] aha152x: stop poking at saved scsi_cmnd members
  [SCSI] st.c: Improve sense output
  [SCSI] lpfc 8.1.7: Change version number to 8.1.7
  ...
2006-07-21 12:04:53 -07:00
David Howells
b4cac1a022 [PATCH] FDPIC: Move roundup() into linux/kernel.h
Move the roundup() macro from binfmt_elf.c into linux/kernel.h as it's
generally useful.

[akpm@osdl.org: nuke all the other implementations]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:22 -07:00
Matthew Wilcox
d14164316d [SCSI] aic7[9x]xx: Remove last vestiges of reverse_scan
Remove last vestiges of the reverse_scan paramater from aic7xxx and aic79xx.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09 11:27:43 -05:00
Adrian Bunk
24f6d2fd31 [SCSI] aic79xx: make ahd_done_with_status() static
This patch makes a needlessly global function static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09 09:05:37 -05:00
James Bottomley
c4e00fac42 Merge ../scsi-misc-2.6
Conflicts:

	drivers/scsi/nsp32.c
	drivers/scsi/pcmcia/nsp_cs.c

Removal of randomness flag conflicts with SA_ -> IRQF_ global
replacement.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-03 09:41:12 -05:00
Thomas Gleixner
1d6f359a2e [PATCH] irq-flags: scsi: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:53 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Hannes Reinecke
f89d0a4e1d [SCSI] aic79xx: remove slave_destroy
Even with the latest fixes aic79xx still occasionally triggers the
BUG_ON in slave_destroy. Rather than trying to figure out the various
levels of interaction here I've decided to remove the callback altogether.

The primary reason for the slave_alloc / slave_destroy is to keep an
index of pointers to the sdevs associated with a given target.
However, by changing the arguments to the affected functions slightly
it's possible to avoid the use of that index entirely.
The only performance penalty we'll incur is in writing the
information for /proc/scsi/XXX, as we'll have to recurse over all
available sdevs to find the correct ones. But I doubt that reading
from /proc is in any way time-critical.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 09:59:18 -05:00
James Bottomley
f0cd91a68a Merge ../linux-2.6 2006-06-10 13:47:26 -05:00
James Bottomley
b2d8bfe185 [SCSI] aic7xxx: expose the bus setting to sysfs
Read the transciever register and display in the host transport
properties.  I'm still not entirely sure what this does for multiple
transciever adapters (like some 160 ones) however, I suspect it
displays the transciever state of the switchable bus segment.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 10:49:07 -05:00
Tobias Klauser
6391a11375 [SCSI] drivers/scsi: Use ARRAY_SIZE macro
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove
duplicates of the macro.

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 10:45:30 -05:00
Hannes Reinecke
2b89dad0c7 [SCSI] audit drivers for incorrect max_id use
max_id now means the maximum number of ids on the bus, which means it
is one greater than the largest possible id number.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-28 13:07:41 -04:00
Jesper Juhl
4a6fae1d9c [SCSI] SCSI: aic7xxx_osm_pci resource leak fix.
Fix resource leak in
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c::ahc_linux_pci_dev_probe()

Found by the coverity checker (#668)

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-25 18:08:13 -05:00