Commit graph

38 commits

Author SHA1 Message Date
Brian King
463fc696ed [SCSI] ipr: Use PCI-E reset API for new ipr adapter
Use a newly added PCI API to issue a PCI Fundamental reset
(warm reset) to a new ipr PCI-E adapter. Typically, the
ipr adapter uses the start BIST bit in config space to reset
an adapter. Issuing start BIST on this particular adapter
results in the PCI-E logic on the card losing sync, which
causes PCI-E errors, making the card unusable. The only reset
mechanism that exists on this hardware that does not have this
problem is PCI Fundamental reset (warm reset).

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08 11:54:40 -05:00
Brian King
ac09c34908 [SCSI] ipr: Enable multi-initator RAID support
Enables multi-initiator support on ipr RAID adapters that support it.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06 09:33:20 -05:00
Brian King
65f5647544 [SCSI] ipr: Handle IOA reset request
In ipr dual adapter configurations, the ipr adapter firmware
may require an adapter reset for various reasons. The reset
is requested by the adapter firmware logging an error with
an IOASC of 0x02048000. Add support to log this error, and
reset the adapter.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06 09:33:19 -05:00
Brian King
aa2e07b4c2 [SCSI] ipr: Driver version to 2.3.2
Bump driver version.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-01 11:19:39 -05:00
Brian King
51b1c7e19e [SCSI] ipr: Faster sg list fetch
Improve overall command performance by embedding the scatterlist
in the command block used by the adapter. This decreases
the overall number of DMAs required for a single command.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-01 11:19:12 -05:00
Brian King
185eb31cc2 [SCSI] ipr: Add new PCI-E IDs to device table
Adds support for some new PCI-E ipr adapters.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-01 11:16:14 -05:00
Brian King
5469cb5bde [SCSI] ipr: Make adapter operational timeout be per adapter type
Some ipr adapters may take longer than others to come operational.
This patch makes this timeout different for different adapters,
while still preserving the module parameter which can be used
to globally override the default.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-01 11:15:26 -05:00
Brian King
9cd065ab80 [SCSI] ipr: Driver version 2.3.1
Bump driver version to 2.3.1.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-27 09:26:36 -06:00
Brian King
51d23da95c [SCSI] ipr: Driver version 2.3.0
Bump driver version.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22 12:22:29 -06:00
Brian King
ac719abab0 [SCSI] ipr: Reduce default error log size
Since the default error log size has increased on SAS adapters,
prevent ipr from logging this additional data unless requested
to do so by the user set log level in order to prevent flooding
the logs.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22 12:22:01 -06:00
Brian King
49dc6a1818 [SCSI] ipr: Add support for logging SAS fabric errors
Adds support for logging SAS fabric errors logged by
the ipr firmware.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22 12:21:44 -06:00
Brian King
60e7486b19 [SCSI] ipr: PCI IDs for new SAS adapters
Adds PCI IDs for some new ipr SAS adapters.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22 12:20:25 -06:00
Brian King
35a39691e4 [SCSI] ipr: Support attaching SATA devices
Adds support to attach SATA devices to ipr SAS adapters.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-26 09:23:18 -07:00
Brian King
008cd5bbfb [SCSI] ipr: Bump driver version to 2.1.4
Bump the ipr driver version to 2.1.4.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 15:51:12 -05:00
Brian King
b5145d25f0 [SCSI] ipr: Add some hardware defined types for SATA
Add some hardware defined types for SATA. This is required
by future patches to add SATA support to ipr.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 15:49:40 -05:00
Brian King
80286d478c [SCSI] ipr: Bump version
Bump ipr driver version to 2.1.3

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13 10:13:30 -05:00
Brian King
fb3ed3cb4b [SCSI] ipr: printk macro cleanup/removal
Remove some unused printk macros, make some more robust, and
convert some to use standard printk macros when possible.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13 10:13:29 -05:00
Brian King
e4fbf44ed0 [SCSI] ipr: Fixup device type check
Fixup a check used by the ipr driver to determine if a given
device is a SCSI disk. Due to the addition of support for
attaching SATA devices, this check needs to be more robust.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13 10:13:28 -05:00
Brian King
1121b794a3 [SCSI] ipr: Disk remove path cleanup
Instead of NULLing the resource entry pointer when a disk
goes away to prevent any new commands being sent to it,
set the adapter resource handle to an invalid value so
new ops getting sent to it will fail with a selection timeout
response. This patch is needed for future SATA patches.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13 10:13:28 -05:00
Brian King
4733804c9f [SCSI] ipr: Fix adapter initialization failure
Since scsi core is always sending scatterlists now, remove
some code which was written with the bad assumption that
a small transfer would not be sent down in a scatterlist.
Without this fix, the ipr driver ends up sending garbage
data to the adapter following a reset, causing it to
fail the reset and take the adapter offline.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-12 11:05:44 -06:00
brking@us.ibm.com
ce155ccecd [SCSI] ipr: Driver initialization fix for kexec/kdump
When kexec booting a kernel when the previous kernel did not
call ipr's shutdown method, the ipr adapter does not get
properly initialized, which can result in the ipr adapter
completing commands issued by the previous kernel. Fix ipr
to detect this scenario by reading the adapter's interrupt
mask register and the microprocessor interrupt register.
If the interrupt mask register indicates that interrupts
are enabled or the reset alert bit is set when the card is
probed, this means the card is in an unknown state and we
hard reset the card.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 18:10:58 -07:00
brking@us.ibm.com
13bf50d1f2 [SCSI] ipr: Driver version 2.1.0
Bump the driver version.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 13:13:11 -06:00
brking@us.ibm.com
dfed823eab [SCSI] ipr: Better handle failure of adapter bringup commands
Some new ipr adapters do not support some of the initialization
commands currently sent to it from the driver. Handle these
commands failing and continue on with the adapter initialization.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 13:12:56 -06:00
brking@us.ibm.com
d71a8b0cba [SCSI] ipr: Increase ipr device scanning limits
Increase device scanning limits so that all devices are found.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 13:12:32 -06:00
brking@us.ibm.com
86f51436dd [SCSI] ipr: New PCI Ids
Adds support for some new ipr adapters

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 13:12:10 -06:00
brking@us.ibm.com
ee0a90fa3e [SCSI] ipr: Support new device queueing model
New ipr adapters support a new device queueing model in the
adapter firmware. The queueing model is the NACA queueing model,
but it does not mean use of NACA is required. The new model removes
some of the adapter firmware queue state that made handling QERR=0
almost impossible. The queueing model on older adapters included the
concept of a queue frozen state, which would freeze the response
queue in the adapter when a check condition occurred, requiring a
a primitive to resume the queue. The new queueing model removes this
complexity.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 13:09:47 -06:00
brking@us.ibm.com
ee0f05b863 [SCSI] ipr: New adapter error types
Handle some new types of ipr errors that can be returned by the adapter.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 13:09:22 -06:00
brking@us.ibm.com
c8f7489251 [SCSI] ipr: Handle device autosense
Some newer ipr adapters are capable of returning autosense from
devices that support it. This patch adds the data structures for
the autosense buffer.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 13:09:06 -06:00
brking@us.ibm.com
3d1d0da675 [SCSI] ipr: Runtime reset
Some IPR RAID adapter will automatically create single device RAID arrays
for all attached devices when the card is initialized. Setting the
RUNTIME_RESET doorbell bit will prevent this from occurring, since we
only want this behavior the first time the card is initialized and not
each time the card happens to get reset.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 13:05:42 -06:00
brking@us.ibm.com
b0df54bb4c [SCSI] ipr: handle new adapter errors
Add support for handling some new errors that may be returned
by ipr adapters.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 13:05:27 -06:00
brking@us.ibm.com
d3c74871bd [SCSI] ipr: Runtime debugging options
Make some compile time debugging options runtime module options.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 13:04:41 -06:00
brking@us.ibm.com
12baa4202d [SCSI] ipr: Fix adapter microcode update DMA mapping leak
If the write buffer command that is issued to the ipr adapter
to update its microcode fails for some reason, the DMA buffer
will never get unmapped. Move the pci_map/unmap out of the
IOA reset job so that the buffer is always clearly mapped
and unmapped.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 13:04:18 -06:00
brking@us.ibm.com
622750406a [SCSI] ipr: Write caching state host attribute
Adds a scsi_host sysfs attribute and module parm to enable/disable
the write cache on an ipr adapter.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 13:03:24 -06:00
brking@us.ibm.com
fa15b1f6be [SCSI] ipr: Physical resource error logging macro
Adds a macro in the ipr driver for logging a physical device location.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 13:00:34 -06:00
brking@us.ibm.com
cfc321397e [SCSI] ipr: Cleanup error structures
Simplify the ipr error structures a bit by removing some duplication.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 12:59:53 -06:00
Jeff Garzik
017560fca4 [SCSI] use sfoo_printk() in drivers
Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 21:04:15 -05:00
brking@us.ibm.com
f80ed13934 [SCSI] ipr: Driver version 2.0.14
Bump driver version

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 12:53:45 -05:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00