A MAXIMUM TRANSFER LENGTH value indicates the maximum transfer length in
logical blocks that the device server accepts for a single command. Fix
function sending the length in sectors instead of blocks.
This patch also removes the special casing for fileio in block_size_store
since this logic in now unified in spc_emulate_evpd_b0() for all backends.
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Link: https://lore.kernel.org/r/20221114102500.88892-2-a.kovaleva@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
libiscsi tests check the support of DPO & FUA bits in usage bits of RSOC
response. This patch adds support for dynamic usage bits for each opcode.
Set support of DPO & FUA bits in usage_bits of RSOC response depending on
support DPOFUA in the backstore device.
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-7-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow support for RSOC to be turned off via the emulate_rsoc attibute.
This is just for testing purposes.
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-5-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Report supported opcodes depending on a dynamic device configuration.
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-4-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for REPORT SUPPORTED OPERATION CODES command according to SPC4.
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-2-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
se_lun and se_lun_acl are immutable pointers of struct se_dev_entry.
Remove RCU usage for access to those pointers.
Link: https://lore.kernel.org/r/20220727214125.19647-3-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a callout to configure a backend's UNMAP settings. This will be used to
allow userspace to configure UNMAP after the initial device setup, similar
to how we can set up the other attributes post device configuration.
Link: https://lore.kernel.org/r/20220628200230.15052-3-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add acls/{ACL}/attrib/authentication attribute that controls authentication
for particular ACL. By default, this attribute inherits a value of the
authentication attribute of the target port group to keep backward
compatibility.
Authentication attribute has 3 states:
"0" - authentication is turned off for this ACL
"1" - authentication is required for this ACL
"-1" - authentication is inherited from TPG
Link: https://lore.kernel.org/r/20220523095905.26070-4-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
iSCSI target is cluttered with open-coded container_of() conversions from
se_nacl to iscsi_node_acl. The code could be cleaned by introducing a
helper - to_iscsi_nacl() (similar to other helpers in target core).
While at it, make another iSCSI conversion helper consistent and rename
iscsi_tpg() helper to to_iscsi_tpg().
Link: https://lore.kernel.org/r/20220523095905.26070-2-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of a small set of driver updates (lpfc, ufs,
mpt3sas mpi3mr, iscsi target). Apart from that this is mostly small
fixes with very few core changes (the biggest one being VPD caching.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYo2WnyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfEiAP4zvniL
xidsiCXGQ4pWF4QW3UxukXpGh5xFREhNCYT9+QEA+DyilCALOI+ZT5GKu2V6gkby
R29ve48/NAWl3fwYjMQ=
=GPL1
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of a small set of driver updates (lpfc, ufs, mpt3sas
mpi3mr, iscsi target). Apart from that this is mostly small fixes with
very few core changes (the biggest one being VPD caching)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (177 commits)
scsi: target: tcmu: Avoid holding XArray lock when calling lock_page
scsi: elx: efct: Remove NULL check after calling container_of()
scsi: dpt_i2o: Drop redundant spinlock initialization
scsi: qedf: Remove redundant variable op
scsi: hisi_sas: Fix memory ordering in hisi_sas_task_deliver()
scsi: fnic: Replace DMA mask of 64 bits with 47 bits
scsi: mpi3mr: Add target device related sysfs attributes
scsi: mpi3mr: Add shost related sysfs attributes
scsi: elx: efct: Remove redundant memset() statement
scsi: megaraid_sas: Remove redundant memset() statement
scsi: mpi3mr: Return error if dma_alloc_coherent() fails
scsi: hisi_sas: Fix rescan after deleting a disk
scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset
scsi: libsas: Refactor sas_ata_hard_reset()
scsi: mpt3sas: Update driver version to 42.100.00.00
scsi: mpt3sas: Fix junk chars displayed while printing ChipName
scsi: ipr: Use kobj_to_dev()
scsi: mpi3mr: Fix a NULL vs IS_ERR() bug in mpi3mr_bsg_init()
scsi: bnx2fc: Avoid using get_cpu() in bnx2fc_cmd_alloc()
scsi: libfc: Remove get_cpu() semantics in fc_exch_em_alloc()
...
The structure iscsi_session naming is used by the iSCSI initiator
driver. Rename the target session to iscsit_session to have more readable
code.
Link: https://lore.kernel.org/r/20220428092939.36768-3-mgurtovoy@nvidia.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The structure iscsi_conn naming is used by the iSCSI initiator
driver. Rename the target conn to iscsit_conn to have more readable code.
Link: https://lore.kernel.org/r/20220428092939.36768-2-mgurtovoy@nvidia.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The structure iscsi_cmd naming is used by the iSCSI initiator driver.
Rename the target cmd to iscsit_cmd to have more readable code.
Link: https://lore.kernel.org/r/20220428092939.36768-1-mgurtovoy@nvidia.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI target drivers is a consumer of the block layer and shoul
d generally work on struct block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The RX/TX threads for iSCSI connection can be scheduled to any online CPUs,
and will not be rescheduled.
When binding other heavy load threads along with iSCSI connection RX/TX
thread to the same CPU, the iSCSI performance will be worse.
Add iscsi/cpus_allowed_list in configfs. The available CPU set of iSCSI
connection RX/TX threads is allowed_cpus & online_cpus. If it is modified,
all RX/TX threads will be rescheduled.
Link: https://lore.kernel.org/r/20220301075500.14266-1-mingzhe.zou@easystack.cn
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We are only holding the lun_tg_pt_gp_lock in target_alua_state_check() to
make sure tg_pt_gp is not freed from under us while we copy the state,
delay, ID values. We can instead use RCU here to access the tg_pt_gp.
With this patch IOPs can increase up to 10% for jobs like:
fio --filename=/dev/sdX --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=64 --numjobs=N
when there are multiple sessions (running that fio command to each /dev/sdX
or using multipath and there are over 8 paths), or more than 8 queues for
the loop or vhost with multiple threads case and numjobs > 8.
Link: https://lore.kernel.org/r/20210930020422.92578-5-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes the following bugs:
1. If there are multiple ordered cmds queued and multiple simple cmds
completing, target_restart_delayed_cmds() could be called on different
CPUs and each instance could start a ordered cmd. They could then run in
different orders than they were queued.
2. target_restart_delayed_cmds() and target_handle_task_attr() can race
where:
1. target_handle_task_attr() has passed the simple_cmds == 0 check.
2. transport_complete_task_attr() then decrements simple_cmds to 0.
3. transport_complete_task_attr() runs target_restart_delayed_cmds() and
it does not see any cmds on the delayed_cmd_list.
4. target_handle_task_attr() adds the cmd to the delayed_cmd_list.
The cmd will then end up timing out.
3. If we are sent > 1 ordered cmds and simple_cmds == 0, we can execute
them out of order, because target_handle_task_attr() will hit that
simple_cmds check first and return false for all ordered cmds sent.
4. We run target_restart_delayed_cmds() after every cmd completion, so if
there is more than 1 simple cmd running, we start executing ordered cmds
after that first cmd instead of waiting for all of them to complete.
5. Ordered cmds are not supposed to start until HEAD OF QUEUE and all older
cmds have completed, and not just simple.
6. It's not a bug but it doesn't make sense to take the delayed_cmd_lock
for every cmd completion when ordered cmds are almost never used. Just
replacing that lock with an atomic increases IOPs by up to 10% when
completions are spread over multiple CPUs and there are multiple
sessions/ mqs/thread accessing the same device.
This patch moves the queued delayed handling to a per device work to
serialze the cmd executions for each device and adds a new counter to track
HEAD_OF_QUEUE and SIMPLE cmds. We can then check the new counter to
determine when to run the work on the completion path.
Link: https://lore.kernel.org/r/20210930020422.92578-3-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Many fabric modules provide their own implementation of enable attribute in
tpg.
Provide a way to remove code duplication in the fabric modules and
automatically add "enable" attribute if a fabric module has an
implementation of fabric_enable_tpg().
Link: https://lore.kernel.org/r/20210910084133.17956-2-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, backend drivers can fail I/O with SAM_STAT_CHECK_CONDITION which
gets us TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE.
Add a new helper that allows backend drivers to fail with specific sense
codes.
This is based on a patch from Mike Christie <michael.christie@oracle.com>.
Cc: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20210803145410.80147-2-s.samoylenko@yadro.com
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Sergey Samoylenko <s.samoylenko@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
These members are only used for ALUA sense detail propagation, which can
just as easily be done via sense_reason_t.
Link: https://lore.kernel.org/r/20210728115353.2396-4-ddiss@suse.de
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement an attribute which provides a way to set a company specific WWN
in configfs via:
target/core/$backstore/$name/wwn/company_id
The Open Fabrics Alliance ID 001405h remains the default.
Link: https://lore.kernel.org/r/20210420185920.42431-3-s.samoylenko@yadro.com
Signed-off-by: Sergey Samoylenko <s.samoylenko@yadro.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It may not always be best to complete the IO on same CPU as it was
submitted on. This commit allows userspace to configure it.
This has been useful for vhost-scsi where we have a single thread for
submissions and completions. If we force the completion on the submission
CPU we may be adding conflicts with what the user has setup in the lower
levels with settings like the block layer rq_affinity or the driver's IRQ
or softirq (the network's rps_cpus value) settings.
We may also want to set it up where the vhost thread runs on CPU N and does
its submissions/completions there, and then have LIO do its completion
booking on CPU M, but can't configure the lower levels due to issues like
using dm-multipath with lots of paths (the path selector can throw commands
all over the system because it's only taking into account latency/throughput
at its level).
The new setting is in:
/sys/kernel/config/target/$fabric/$target/param/cmd_completion_affinity
Writing:
-1 -> Gives the current default behavior of completing on the
submission CPU.
-2 -> Completes the cmd on the CPU the lower layers sent it to us from.
> 0 -> Completes on the CPU userspace has specified.
Link: https://lore.kernel.org/r/20210227170006.5077-26-michael.christie@oracle.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
target_core_iblock is plugging and unplugging on every command and this is
causing perf issues for drivers that prefer batched cmds. With recent
patches we can now take multiple cmds from a fabric driver queue and then
pass them down the backend drivers in a batch. This patch adds this support
by adding 2 callouts to the backend for plugging and unplugging the
device. Subsequent commits will add support for iblock and tcmu device
plugging.
Link: https://lore.kernel.org/r/20210227170006.5077-22-michael.christie@oracle.com
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We have a couple holes in the cmd flags definitions. This cleans up the
definitions to fix that and make it easier to read.
Link: https://lore.kernel.org/r/20210227170006.5077-21-michael.christie@oracle.com
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
loop and vhost/scsi do their target cmd submission from driver
workqueues. This allows them to avoid an issue where the backend may block
waiting for resources like tags/requests, mem/locks, etc and that ends up
blocking their entire submission path and for the case of vhost-scsi both
the submission and completion path.
This patch adds a helper drivers can use to submit from a LIO workqueue.
This code will then be extended in the next patches to fix the plugging of
backend devices.
We are only converting vhost/loop initially, but the workqueue based
submission will work for other drivers and have similar benefits where the
main target loops will not end up blocking one some backend resource.
Link: https://lore.kernel.org/r/20210227170006.5077-17-michael.christie@oracle.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
tcm_loop could be used like a normal block device, so we can't use
GFP_KERNEL and should use GFP_NOIO. This adds a gfp_t arg to
target_cmd_init_cdb() and converts the users. For every driver but loop
GFP_KERNEL is kept.
This will also be useful in subsequent patches where loop needs to do
target_submit_prep() from interrupt context to get a ref to the se_device,
and so it will need to use GFP_ATOMIC.
Link: https://lore.kernel.org/r/20210227170006.5077-16-michael.christie@oracle.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Convert target_submit_cmd() to do its own calls and then remove
target_submit_cmd_map_sgls() since no one uses it.
Link: https://lore.kernel.org/r/20210227170006.5077-15-michael.christie@oracle.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This breaks up target_submit_cmd_map_sgls() into 3 helpers:
- target_init_cmd(): Do the basic general setup and get a refcount to the
session to make sure the caller can execute the cmd.
- target_submit_prep(): Do the mapping, cdb processing and get a ref to
the LUN.
- target_submit(): Pass the cmd to LIO core for execution.
The above functions must be used by drivers that either:
1. Rely on LIO for session shutdown synchronization by calling
target_stop_session().
2. Need to map sgls.
When the next patches are applied then simple drivers that do not need the
extra functionality above can use target_submit_cmd() and not worry about
failures being returned and how to handle them, since many drivers were
getting this wrong and would have hit refcount bugs.
Also, by breaking target_submit_cmd_map_sgls() up into these 3 helper
functions, we can allow the later patches to do the init/prep from
interrupt context and then do the submission from a workqueue.
Link: https://lore.kernel.org/r/20210227170006.5077-5-michael.christie@oracle.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Michael Cyr <mikecyr@linux.ibm.com>
Cc: Chris Boot <bootc@bootc.net>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename transport_init_se_cmd() to __target_init_cmd() to reflect that it is
more of an internal function that drivers should normally not use and
because we are going to add a new init function in the next patches.
Link: https://lore.kernel.org/r/20210227170006.5077-4-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
TCM doesn't properly handle underflow case for service actions. One way to
prevent it is to always complete command with
target_complete_cmd_with_length(), however it requires access to data_sg,
which is not always available.
This change introduces target_set_cmd_data_length() function which allows
to set command data length before completing it.
Link: https://lore.kernel.org/r/20210209072202.41154-2-a.miloserdov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to FCP-4 (9.4.2):
If the command requested that data beyond the length specified by the
FCP_DL field be transferred, then the device server shall set the
FCP_RESID_OVER bit (see 9.5.8) to one in the FCP_RSP IU and:
a) process the command normally except that data beyond the FCP_DL count
shall not be requested or transferred;
b) transfer no data and return CHECK CONDITION status with the sense key
set to ILLEGAL REQUEST and the additional sense code set to INVALID FIELD
IN COMMAND INFORMATION UNIT; or
c) may transfer data and return CHECK CONDITION status with the sense key
set to ABORTED COMMAND and the additional sense code set to INVALID FIELD
IN COMMAND INFORMATION UNIT.
TCM follows b) and transfers no data for residual writes but returns
INVALID FIELD IN CDB instead of INVALID FIELD IN COMMAND INFORMATION UNIT.
Change the ASCQ to INVALID FIELD IN COMMAND INFORMATION UNIT to meet the
standard.
Link: https://lore.kernel.org/r/20201203082035.54566-4-a.kovaleva@yadro.com
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Do a state_list/execute_task_lock per CPU, so we can do submissions from
different CPUs without contention with each other.
Note: tcm_fc was passing TARGET_SCF_USE_CPUID, but never set cpuid. The
assumption is that it wanted to set the cpuid to the CPU it was submitting
from so it will get this behavior with this patch.
[mkp: s/printk/pr_err/ + resolve COMPARE AND WRITE patch conflict]
Link: https://lore.kernel.org/r/1604257174-4524-8-git-send-email-michael.christie@oracle.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Drop the sess_cmd_lock by:
- Removing the sess_cmd_list use from LIO core, because it's been
moved to qla2xxx.
- Removing sess_tearing_down check in the I/O path. Instead of using that
bit and the sess_cmd_lock, we rely on the cmd_count percpu ref. To do
this we switch to percpu_ref_kill_and_confirm/percpu_ref_tryget_live.
Link: https://lore.kernel.org/r/1604257174-4524-7-git-send-email-michael.christie@oracle.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
cmd.bad_sector currently gets packed into the sense INFORMATION field for
TCM_LOGICAL_BLOCK_{GUARD,APP_TAG,REF_TAG}_CHECK_FAILED errors, which carry
an .add_sector_info flag in the sense_detail_table to ensure this.
In preparation for propagating a byte offset on COMPARE AND WRITE
TCM_MISCOMPARE_VERIFY error, rename cmd.bad_sector to cmd.sense_info and
sense_detail.add_sector_info to sense_detail.add_sense_info so that it
better reflects the sense INFORMATION field destination.
[ddiss: update previously overlooked ib_isert]
Link: https://lore.kernel.org/r/20201031233211.5207-3-ddiss@suse.de
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This function always returns 0. We can make it return void to simplify the
code. Also, no caller ever checks the return value of this function.
Link: https://lore.kernel.org/r/20200803150008.83920-1-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Target core is modified to call an optional backend callback function if a
TMR is received or commands are aborted implicitly after a PR command was
received. The backend function takes as parameters the se_dev, the type of
the TMR, and the list of aborted commands. If no commands were aborted, an
empty list is supplied.
Link: https://lore.kernel.org/r/20200726153510.13077-3-bstroesser@ts.fujitsu.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
iscsi_target_sk_data_ready() could be invoked indirectly by
iscsi_target_do_login_rx() from the workqueue like this:
iscsi_target_do_login_rx()
iscsi_target_do_login()
iscsi_target_do_tx_login_io()
iscsit_put_login_tx()
iscsi_login_tx_data()
tx_data()
sock_sendmsg_nosec()
tcp_sendmsg()
release_sock()
sk_backlog_rcv()
tcp_v4_do_rcv()
tcp_data_ready()
iscsi_target_sk_data_ready()
At that time LOGIN_FLAGS_READ_ACTIVE is not cleared and
iscsi_target_sk_data_ready will not read data from the socket. Some iscsi
initiators (libiscsi) will wait forever for a reply.
LOGIN_FLAGS_READ_ACTIVE should be cleared early just after doing the
receive and before writing to the socket in iscsi_target_do_login_rx.
Unfortunately, LOGIN_FLAGS_READ_ACTIVE is also used by sk_state_change to
do login cleanup if a socket was closed at login time. It is supposed to be
cleared after the login PDU is successfully processed and replied.
Introduce another flag, LOGIN_FLAGS_WRITE_ACTIVE, to cover the transmit
part.
Link: https://lore.kernel.org/r/20200716100212.4237-2-houpu@bytedance.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Hou Pu <houpu@bytedance.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit also removes the unused argument, cdb, that was passed to this
function.
Link: https://lore.kernel.org/r/1591559913-8388-5-git-send-email-sudhakar.panneerselvam@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Initialization of orig_fe_lun is moved to transport_init_se_cmd() from
transport_lookup_cmd_lun(). This helps for the cases where the SCSI request
fails before the call to transport_lookup_cmd_lun() so that
trace_target_cmd_complete() can print the LUN information to the trace
buffer. Due to this change, the lun parameter is removed from
transport_lookup_cmd_lun() and transport_lookup_tmr_lun().
Link: https://lore.kernel.org/r/1591559913-8388-3-git-send-email-sudhakar.panneerselvam@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
target_setup_cmd_from_cdb() is called after a successful call to
transport_lookup_cmd_lun(). The new helper factors out the code that can be
called before the call to transport_lookup_cmd_lun(). This helper will be
used in an upcoming commit to address NULL pointer dereference.
Link: https://lore.kernel.org/r/1591559913-8388-2-git-send-email-sudhakar.panneerselvam@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently in tcmu reservation commands are handled by core's pr
implementation (default) or completely rejected (emulate_pr set to 0). We
additionally want to be able to do full reservation handling in
userspace. Therefore we need a way to set TRANSPORT_FLAG_PASSTHROUGH_PGR.
The inverted flag is displayed by attribute pgr_support. Since we moved
the flag from transport/backend to se_device in the previous commit, we now
can make it changeable per device by allowing to write the attribute. The
new field transport_flags_changeable in transport/backend is used to reject
writing if not allowed for a backend.
Regarding ALUA we also want to be able to passthrough commands to userspace
in tcmu. Therefore we need TRANSPORT_FLAG_PASSTHROUGH_ALUA to be
changeable, because by setting it we can switch off all ALUA checks in
core. So we also set TRANSPORT_FLAG_PASSTHROUGH_ALUA in tcmu's
transport_flags_changeable.
Of course, ALUA and reservation handling in userspace will work only, if
session/nexus information is sent to userspace along with every
command. This will be object of a patch series announced by Mike Christie.
Link: https://lore.kernel.org/r/20200427150823.15350-5-bstroesser@ts.fujitsu.com
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pgr_support and alua_support device attributes show the inverted value of
the transport_flags:
* TRANSPORT_FLAG_PASSTHROUGH_PGR
* TRANSPORT_FLAG_PASSTHROUGH_ALUA
These attributes are per device, while the flags are per backend. Rename
the transport_flags in backend/transport to transport_flags_default and use
this value to initialize the new transport_flags field in the se_device
structure.
Now data and attribute both are per se_device.
Link: https://lore.kernel.org/r/20200427150823.15350-4-bstroesser@ts.fujitsu.com
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
tcmu has not set TRANSPORT_FLAG_PASSTHROUGH_PGR. Therefore the in-core pr
emulation is active by default, but there are some attributes for
configuration missing. Add them.
Link: https://lore.kernel.org/r/20200427150823.15350-3-bstroesser@ts.fujitsu.com
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch removes the iscsi_data_count structure and the
iscsit_do_rx_data() function because they are used only by rx_data()
Link: https://lore.kernel.org/r/20200424113913.17237-1-mlombard@redhat.com
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A number of hangs have been reported against the target driver; they are
due to the fact that multiple threads may try to destroy the iscsi session
at the same time. This may be reproduced for example when a "targetcli
iscsi/iqn.../tpg1 disable" command is executed while a logout operation is
underway.
When this happens, two or more threads may end up sleeping and waiting for
iscsit_close_connection() to execute "complete(session_wait_comp)". Only
one of the threads will wake up and proceed to destroy the session
structure, the remaining threads will hang forever.
Note that if the blocked threads are somehow forced to wake up with
complete_all(), they will try to free the same iscsi session structure
destroyed by the first thread, causing double frees, memory corruptions
etc...
With this patch, the threads that want to destroy the iscsi session will
increase the session refcount and will set the "session_close" flag to 1;
then they wait for the driver to close the remaining active connections.
When the last connection is closed, iscsit_close_connection() will wake up
all the threads and will wait for the session's refcount to reach zero;
when this happens, iscsit_close_connection() will destroy the session
structure because no one is referencing it anymore.
INFO: task targetcli:5971 blocked for more than 120 seconds.
Tainted: P OE 4.15.0-72-generic #81~16.04.1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
targetcli D 0 5971 1 0x00000080
Call Trace:
__schedule+0x3d6/0x8b0
? vprintk_func+0x44/0xe0
schedule+0x36/0x80
schedule_timeout+0x1db/0x370
? __dynamic_pr_debug+0x8a/0xb0
wait_for_completion+0xb4/0x140
? wake_up_q+0x70/0x70
iscsit_free_session+0x13d/0x1a0 [iscsi_target_mod]
iscsit_release_sessions_for_tpg+0x16b/0x1e0 [iscsi_target_mod]
iscsit_tpg_disable_portal_group+0xca/0x1c0 [iscsi_target_mod]
lio_target_tpg_enable_store+0x66/0xe0 [iscsi_target_mod]
configfs_write_file+0xb9/0x120
__vfs_write+0x1b/0x40
vfs_write+0xb8/0x1b0
SyS_write+0x5c/0xe0
do_syscall_64+0x73/0x130
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Link: https://lore.kernel.org/r/20200313170656.9716-3-mlombard@redhat.com
Reported-by: Matt Coleman <mcoleman@datto.com>
Tested-by: Matt Coleman <mcoleman@datto.com>
Tested-by: Rahul Kundu <rahul.kundu@chelsio.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the get_unaligned_be24(), get_unaligned_le24() and
put_unaligned_le24() definitions from various drivers into
include/linux/unaligned/generic.h. Add a put_unaligned_be24()
implementation.
Link: https://lore.kernel.org/r/20200313203102.16613-4-bvanassche@acm.org
Cc: Keith Busch <kbusch@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Jens Axboe <axboe@fb.com>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> # For drivers/usb
Reviewed-by: Felipe Balbi <balbi@kernel.org> # For drivers/usb/gadget
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The emulate_ua_intlck_ctrl device attribute accepts values of 0, 1 or 2 via
ConfigFS, which map to unit attention interlocks control codes in the MODE
SENSE control Mode Page. Use an enum to track these values so that it's
clear that, unlike the remaining emulate_X attributes,
emulate_ua_intlck_ctrl isn't boolean.
Link: https://marc.info/?l=target-devel&m=158227825428798
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This should harden us against configfs API regressions similar to the one
fixed by the previous commit.
Link: https://marc.info/?l=target-devel&m=158211731505174
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The LIO unmap_zeroes_data device attribute is mapped to the LBPRZ flag in
the READ CAPACITY(16) and Thin Provisioning VPD INQUIRY responses.
The unmap_zeroes_data attribute is exposed via configfs, where any write
value is correctly validated via strtobool(). However, when initialised via
target_configure_unmap_from_queue() it takes the value of the device's
max_write_zeroes_sectors queue limit, which is non-boolean.
A non-boolean value can be read from configfs, but attempting to write the
same value back results in -EINVAL, causing problems for configuration
utilities such as targetcli.
Link: https://marc.info/?l=target-devel&m=158213354011309
Fixes: 2237498f0b ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
