This replaces sysfs btree_avg_write_size with btree_write_stats, which
now breaks out statistics by the source of the btree write.
Btree writes that are too small are a source of inefficiency, and
excessive btree resort overhead - this will let us see what's causing
them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, bch2_btree_update_start() would always take all intent
locks, all the way up to the root.
We've finally got data from users where this became a scalability issue
- so, this patch fixes bch2_btree_update_start() to only take the locks
we need.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the future, with the new deadlock cycle detector, we won't be using
bare six_lock_* anymore: lock wait entries will all be embedded in
btree_trans, and we will need a btree_trans context whenever locking a
btree node.
This patch plumbs a btree_trans to the few places that need it, and adds
two new locking functions
- btree_node_lock_nopath, which may fail returning a transaction
restart, and
- btree_node_lock_nopath_nofail, to be used in places where we know we
cannot deadlock (i.e. because we're holding no other locks).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We're seeing occasional firings of the assertion in the key cache
shutdown code that nr_dirty == 0, which means we must sometimes be doing
transaction commits after we've gone read only.
Cleanups & changes:
- BCH_FS_ALLOC_CLEAN renamed to BCH_FS_CLEAN_SHUTDOWN
- new helper bch2_btree_interior_updates_flush(), which returns true if
it had to wait
- bch2_btree_flush_writes() now also returns true if there were btree
writes in flight
- __bch2_fs_read_only now checks if btree writes were in flight in the
shutdown loop: btree write completion does a transaction update, to
update the pointer in the parent node
- assert that !BCH_FS_CLEAN_SHUTDOWN in __bch2_trans_commit
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Six locks have a percpu mode, which we use for interior btree nodes, as
well as btree key cache keys for the subvolumes btree. We've been
switching locks back and forth between percpu and non percpu mode as
needed, but it turns out this is racy - when we're reusing an existing
node, other threads could be attempting to lock it while we're switching
it between modes.
This patch fixes this by never switching 'struct btree' between the two
modes, and instead segragating them between two different freed lists.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds flags for options that must be a power of two (block size and
btree node size), and options that are stored in the superblock as a
power of two (encoded extent max).
Also: options are now stored in memory in the same units they're
displayed in (bytes): we now convert when getting and setting from the
superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds more latency/event measurements and breaks some apart into
more events. Journal writes are broken apart into flush writes and
noflush writes, btree compactions are broken out from btree splits,
btree mergers are added, as well as btree_interior_updates - foreground
and total.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This splits btree_iter into two components: btree_iter is now the
externally visible componont, and it points to a btree_path which is now
reference counted.
This means we no longer have to clone iterators up front if they might
be mutated - btree_path can be shared by multiple iterators, and cloned
if an iterator would mutate a shared btree_path. This will help us use
iterators more efficiently, as well as slimming down the main long lived
state in btree_trans, and significantly cleans up the logic for iterator
lifetimes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is prep work for splitting btree_path out from btree_iter -
btree_path will not have a pointer to btree_trans.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
btree_trans should always be passed when we have one - iter->trans is
disfavoured. This mainly updates old code in btree_update_interior.c,
some of which predates btree_trans.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Waiting on a btree node write with btree locks held can deadlock, if the
write errors: the write error path has to do do a btree update to drop
the pointer to the replica that errored.
The interior update path has to wait on in flight btree writes before
freeing nodes on disk. Previously, this was done in
bch2_btree_interior_update_will_free_node(), and could deadlock; now, we
just stash a pointer to the node and do it in
btree_update_nodes_written(), just prior to the transactional part of
the update.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The previous patch that fixed btree nodes being written too aggressively
now meant that we weren't sorting btree node bsets optimally - this
patch fixes that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This means that btree node splits don't have to automatically trigger a
transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_btree_update_start() is now responsible for taking gc_lock and
upgrading the iterator to lock parent nodes - greatly simplifying error
handling and all of the callers.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The interior btree node update path has changed, this is no longer
needed.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_varint_decode can do reads up to 7 bytes past the end ptr, for the
sake of performance - these extra bytes are always masked off.
This won't be a problem in practice if we make sure to burn 8 bytes in
any buffer that has bkeys in it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
printbufs know how big the buffer is that was allocated, so we can get
rid of the random PAGE_SIZEs all over the place.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It should be checking for the recently added flag
btree_node_needs_rewrite.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We need a larger open bucket reserve now that the btree interior update
path holds onto open bucket references; filesystems with many high
through devices may need more open buckets now.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We now update the alloc info (bucket sector counts) atomically with
journalling the update to the interior btree nodes, and we also set new
btree roots atomically with the journalled part of the btree update.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Not legal to block on a journal prereservation with btree locks held.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, the btree has always been self contained and internally
consistent on disk without anything from the journal - the journal just
contained pointers to the btree roots.
However, this meant that btree node split or compact operations - i.e.
anything that changes btree node topology and involves updates to
interior nodes - would require that interior btree node to be written
immediately, which means emitting a btree node write that's mostly empty
(using 4k of space on disk if the filesystemm blocksize is 4k to only
write perhaps ~100 bytes of new keys).
More importantly, this meant most btree node writes had to be FUA, and
consumer drives have a history of slow and/or buggy FUA support - other
filesystes have been bit by this.
This patch changes the interior btree update path to journal updates to
interior nodes, after the writes for the new btree nodes have completed.
Best of all, it turns out to simplify the interior node update path
somewhat.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Ever since the btree code was first written, handling of overwriting
existing extents - including partially overwriting and splittin existing
extents - was handled as part of the core btree insert path. The modern
transaction and iterator infrastructure didn't exist then, so that was
the only way for it to be done.
This patch moves that outside of the core btree code to a pass that runs
at transaction commit time.
This is a significant simplification to the btree code and overall
reduction in code size, but more importantly it gets us much closer to
the core btree code being completely independent of extents and is
important prep work for snapshots.
This introduces a new feature bit; the old and new extent update models
are incompatible when the filesystem needs journal replay.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Prep work for journalling updates to interior nodes - enforcing ordering
will greatly simplify those changes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
More prep work for snapshots: extents will soon be using
KEY_TYPE_deleted for whiteouts, with 0 size. But we wen't be able to
keep these whiteouts with the rest of the extents in the btree node, due
to sorting invariants breaking.
We can deal with this by immediately moving the new whiteouts to the
unwritten whiteouts area - this just means those whiteouts won't be
sorted, so we need new code to sort them prior to merging them with the
rest of the keys to be written.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The main optimization here is that if we let
bch2_replicas_delta_list_apply() fail, we can completely skip calling
bch2_bkey_replicas_marked_locked().
And assorted other small optimizations.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is prep work for the btree key cache: btree iterators will point to
either struct btree, or a new struct bkey_cached.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_alloc_sectors_start() was a nightmare to work with - it's got some
tricky stuff to do, since it wants to use the buckets the writepoint
already has, unless they're not in the target it wants to write to,
unless it can't allocate from any other devices in which case it will
use those buckets if it has to - et cetera.
This restructures the code to start with a new empty list of open
buckets we're going to use for the new allocation, pulling buckets from
the write point's list as we decide that we really are going to use
them - making the code somewhat more functional and drastically easier
to understand.
Also fixes a bug where we could end up waiting on c->freelist_wait
(because allocating from one device failed) but return success from
bch2_bucket_alloc(), because allocating from a different device
succeeded.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Initially forked from drivers/md/bcache, bcachefs is a new copy-on-write
filesystem with every feature you could possibly want.
Website: https://bcachefs.org
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
