This patch adds support for the AD5415, AD5426, AD5429, AD5432, AD5439, AD5443
and AD5449 single and dual channel DACs.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
For ADCs or DACs the denominator for fractional types often is a power of two.
In this case we can use a shift operation instead of the rather expensive 64 bit
division. This patch adds a new fractional type which expects the denominator to
be specified as the log2 of the actual denominator. E.g. for ADCs and DACs this
will usually be the number of significant bits.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
strict_strto* has been deprecated in favor of kstrto*. Use strict_strtouint
respective strict_strtoint, since that is what the functions we pass the
converted values to expect.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use dev_kcalloc instead of devm_kzalloc to allocate arrays since it is
semantically more appropriate.
While we are at it the patch also fixes the following coccinelle warning:
drivers/iio/adc/at91_adc.c:277:25-31: ERROR: application of sizeof to pointer
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-By: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fixes the following warnings from coccicheck:
drivers/iio/inkern.c:81:6-14: WARNING: Comparison to bool
drivers/iio/dac/ad5686.c:191:5-11: WARNING: Comparison to bool
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
irq_enabled is only set, but never read
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
TI LP8788 PMU provides regulators, battery charger, ADC,
RTC, backlight driver and current sinks.
This patch enables the LP8788 ADC functions.
The LP8788 ADC has several ADC input selection and supports 12bit resolution.
Internal operation of getting ADC is access to registers of LP8788.
The LP8788 ADC uses exported functions for accessing these registers.
(exported by LP8788 MFD device driver)
This driver supports IIO_CHAN_INFO_RAW and SCALE.
So the IIO consumer can calculate the value with raw and scale.
The unit of scale is micro.
(ADC Input Selection)
Voltage: battery voltage (MAX 5.0, 5.5 and 6.0V)
charger input voltage
four general ADC inputs
coin cell voltage
Current: battery charging current
Temperature: IC temperature
(The IIO map for the IIO consumer)
The ADC input is configurable in the platform side.
Even though this platform data is not defined,
the default IIO map is created for supporting the power supply driver.
The battery voltage and temperature are used inside this driver.
(History)
Patch v6.
(a) Fix scale value for each ADC input selection
Voltage and current type are mili unit and temperature is degree.
To calculate the IC temperature,
temp = raw * scaleint + (raw * scalepart)/ 1000000, scaleint is always 0.
= raw * 0.061050, raw: 0 ~ 4095
Then range of IC temperature(ADC result) is 0 ~ 250'C
(b) Reorganization of the IIO channel Spec
Remove address, scan_type and scan_index and rollback the datasheet name.
The reason why 'address' field is unnecessary is no relation with each channel.
Moreover, to get the raw ADC value, the address info is not only one register
but also several registers.
Therefore specific function(lp8788_get_adc_result) is called rather than
using one 'address' field.
(c) Fix coding style
Remove duplicated checking routine while unregistering the IIO map.
Fix code for space and parenthesis.
Patch v5.
Fix default consumer name as 'lp8788-charger'.
Add mutex for ADC read operation.
Reorganization on lp8788_adc_read_raw().
Patch v4.
Fix adc_raw function: support RAW and SCALE channel info.
Change LP8788 ADC platform data - iio map.
Enables the default IIO map.
Patch v3.
Fix wrong size of allocating iio private data.
Fix coding styles.
Patch v2.
Support RAW and SCALE interface for IIO consumer.
Clean up the iio channel spec macro.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
When the IIO consumer tries to get specific IIO channel,
few error cases can be happened.
(a) Memory allocation failure
(b) No matched ADC channel error
(c) Invalid input arguments
This patch enables cleaning up error handling in case of (a) and (b).
In error handling code,
(a): the reference count of the IIO device should be decreased.
(b): the allocated memory should be freed with restoring the reference count.
Therefore iio_deivce_put() is called in both cases.
This can be handled in the last error statement.
Additionally, integer variable is used for stating each error case explicitly.
Then, the error returns as ERR_PTR() with this value.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The reference count of the IIO device is increased if the IIO map has
matched consumer name.
After then, it tries to allocate the iio_channel which is used by the consumer.
If it fails to allocate memory, the reference count should be decreased.
This patch enables restoring the reference count of the IIO device.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
We need "ret" to be signed for the error handling to work correctly.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
When hid sensor hub is unplugged, there is a crash in
iio_device_unregister_trigger_consumer.
In a typical IIO driver when remove is called, it will unregister and free
trigger and then it will call iio_device_free.
The function iio_trigger_free() will free the allocated memory for trigger.
If this trigger was assigned to iio_dev->trig, then it should be set to NULL.
Othewise when iio_device_free() is called later, it finally calls
iio_device_unregsister_trigger(), which checks for
if (indio_dev->trig)
iio_trigger_put(indio_dev->trig);
If indio_dev->trig is not set to NULL, it calls iio_trigger_put on a bad
pointer causing crash.
This scenerio can happen in any driver, which is storing trigger pointer in
iio_dev structure and following current procedure during remove.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Here we have
1) a set cleaning up and moving the ad7476 driver out of staging.
Support for a number of additional parts is also added to that driver.
2) cleanups from various people for the in kernel interface code as that
is getting more an more real use and hence people are picking up on
minor issues that made it through review. Also a related useful set
of utility functions to avoid duplicate code for converting IIO
representations to other forms.
3) a new fractional type for our read_raw / write_raw functions.
This allows avoiding loss of accuracy via the in kernel interfaces in some
cases as well as being rather convenient for a lot of range -> scale
conversions.
4) New AD5755 DAC driver.
5) Some Blackfin timer trigger improvements including hardware pulse control
for device triggering.
6) Support for the ad7091r in the ad7476 driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=BlMh
-----END PGP SIGNATURE-----
Merge tag 'iio-for-v3.7d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
IIO new drivers, features and rework for the 3.7 cycle, 4th set.
Here we have
1) a set cleaning up and moving the ad7476 driver out of staging.
Support for a number of additional parts is also added to that driver.
2) cleanups from various people for the in kernel interface code as that
is getting more an more real use and hence people are picking up on
minor issues that made it through review. Also a related useful set
of utility functions to avoid duplicate code for converting IIO
representations to other forms.
3) a new fractional type for our read_raw / write_raw functions.
This allows avoiding loss of accuracy via the in kernel interfaces in some
cases as well as being rather convenient for a lot of range -> scale
conversions.
4) New AD5755 DAC driver.
5) Some Blackfin timer trigger improvements including hardware pulse control
for device triggering.
6) Support for the ad7091r in the ad7476 driver.
Add support for the ad7091r 12 bit ADC to the ad7476 driver. Although the
ad7091r is not really related to any of the other devices supported by this
driver, luckily for us there are not so many ways (which are not totally insane)
how sampling a single channel ADC via SPI can be implemented and support for the
ad7091r can be added to the driver with just a few adjustments.
The ad7091r requires an external "conversion start" pulse to start a sample
conversion. After the conversion has finished the result can be read via SPI. We
depend on a IIO trigger to generate this signal, as a result only sampling in
buffered mode and not in manual mode is available.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add a function to read a processed value from a channel. The function will first
attempt to read the IIO_CHAN_INFO_PROCESSED attribute. If that fails it will
read the IIO_CHAN_INFO_RAW attribute and convert the result from a raw value to
a processed value.
The patch also introduces a function to convert raw value to a processed value
and exports it, in case a user needs or wants to do the conversion by itself.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch adds support for the AD5755, AD5755-1, AD5757, AD5735, AD5737 16 and
14 bit quad-channel DACs. The AD5757/AD5737 only have current outputs, but
for the AD5755/AD5757 each of the outputs can be configured to either be a
voltage or a current output. We only allow to configure this at device probe
time since usually this needs to match the external circuitry and should not be
changed on the fly.
A few trivial formatting changes on merge.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The datasheet name is defined in the IIO driver.
On the other hand, the adc_channel_label is configured in
the platform side.
If the datasheet name is not matched with any adc_channel_label,
the iio_channel_get() should be returned as error for preventing
invalid channel data access.
This can be handled either way.
(a) checking null data when using it : in the xxx_read_raw()
or
(b) error returns when the channel is requested : this patch
The IIO consumer can't use the channel with invalid channel spec.
Therefore case (b) is more reasonable.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This pulls in the staging tree fixes in 3.6-rc6 into our branch to resolve the
merge issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kzalloc() rather than kmalloc() for initializing the iio_channel structure.
This patch enables the iio_dev and iio_chan_spec are set to NULL.
This may prevent the page fault problem because the pointer of iio_chan_spec
is initialized as NULL.
The iio_chan_spec is updated only in case that the IIO map has
specific channel label.
When the map has no ADC channel label, then the value of iio_chan_spec
remains as invalid pointer.
To prevent this problem, the pointer should be initialized as NULL.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Currently IIO uses a decimal fixed point representations for real type numbers.
This patch introduces a new representation for rational type numbers. The number
will be expressed by specifying a numerator and denominator. For converting a
raw value to a processed value multiply it by the numerator and divide it by the
denominator.
The reasoning for introducing this new type is that for a lot of devices the
scale can be represented easily by a fractional number, but it is not possible
to represent it as fixed point number without rounding. E.g. for a simple DAC
the scale is often the reference voltage divided by the number of possible
values (Usually 2**n_bits - 1). Each driver currently implements the conversion
of this fraction to a fixed point number on its own.
Also when it comes to the in-kernel interface this allows to directly use the
fractional factors to convert a raw value to a processed value. This should on
one hand require less instructions and on the other hand increase the
precision.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The ad7276/ad7277/ad7278 are similar to the ad7476/ad7477/ad7478 but have the
same number of leading zeros as the ad7940. The ad7273/ad7274 have a extra pin
for VREF where as for the ad7276/ad7277/ad7278 VREF is taken from VDD, but
otherwise they are compatible to the ad7276/ad7277.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The AD7940 is a single channel 14 bit ADC similar to the ADCs already supported
by the ad7476 driver, but it does have a different shift factor.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The ad7910/ad7920 are software compatible to the ad7467/ad7466.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The ad7476 driver is a driver for simple single channel ADCs. The driver does
not export any experimental or custom ABI files nor do the static code check
tools report any issues, so move the driver out of staging.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch adds support for the Analog Devices AD7787, AD7788, AD7789, AD7790
and AD7791 Sigma Delta Analog-to-Digital converters.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The ad5301/ad5311/ad5321 are software compatible to the ad5602/ad5612/ad5622.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The ad5300/ad5310/ad5320 is a family of single channel DACs with a SPI interface
similar to the ad5601/ad5611/ad5621 but use a different shift factor for the
data word.
While we are at it also reorder the device part numbers in the ad5446 driver
Kconfig to be ordered alphabetically.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Drop timestamp parameter from buffer store_to callback and subsequently from
iio_push_to_buffer. The timestamp parameter is unused and it seems likely that
it will stay unused in the future, so it should be safe to remove it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Consistently use iio_push_to_buffer instead of manually calling the buffers
store_to callback.
These crossed with Lars-Peter's patch set doing every other case.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
Added usage id processing for ALS. This uses IIO
interfaces for triggered buffer to present data to user
mode.This uses HID sensor framework for registering callback
events from the sensor hub.
Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Added usage id processing for Compass 3D. This uses IIO
interfaces for triggered buffer to present data to user
mode.This uses HID sensor framework for registering callback
events from the sensor hub.
Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Added usage id processing for Gyroscope 3D. This uses IIO
interfaces for triggered buffer to present data to user
mode.This uses HID sensor framework for registering callback
events from the sensor hub.
Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Added usage id processing for Accelerometer 3D.This uses IIO
interfaces for triggered buffer to present data to user
mode.This uses HID sensor framework for registering callback
events from the sensor hub.
Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch contains the common code, which is used by all HID sensors.
There are some common set of attributes, which every hid sensor
needs it. This patch contains all such attributes processing.
Also the trigger interface is common among all HID sensors. This
patch contains common trigger functions utilized by all HID sensors.
Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Added hysteresis to the list of channel info enumeration, shared
/separate bit defines and to postfix channel info strings.
Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Most of the defines in there were not even used, and the structs left are
private to the .c file. Makes the driver more in line with most of the
kernel drivers.
Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch adds support for I2C based single channel DACs to the ad5446
driver. Specifically AD5602, AD5612 and AD5622.
V1: from Lars-Peter Clausen <lars@metafoo.de>
V2: Split the device IDs into two enums and move them to the c file.
Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Clk_prepare_enable and clk_disable_unprepare combine clk_prepare and
clk_enable, and clk_disable and clk_unprepare. They make the code more
concise, and ensure that clk_unprepare is called when clk_enable fails.
A simplified version of the semantic patch that introduces calls to these
functions is as follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e;
@@
- clk_prepare(e);
- clk_enable(e);
+ clk_prepare_enable(e);
@@
expression e;
@@
- clk_disable(e);
- clk_unprepare(e);
+ clk_disable_unprepare(e);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Change the call to PTR_ERR to access the value just tested by IS_ERR.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e,e1;
@@
(
if (IS_ERR(e)) { ... PTR_ERR(e) ... }
|
if (IS_ERR(e=e1)) { ... PTR_ERR(e) ... }
|
*if (IS_ERR(e))
{ ...
* PTR_ERR(e1)
... }
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
These two elements were originally in the patch
iio:kfifo_buf Take advantage of the fixed record size used in IIO
but Lars-Peter Clausen pointed out they should not have been
so here they are.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
By bypassing the standard macros for setting up the kfifo we can
take advantage of the fixed record size implementation without
having to have a type to pass in (from which the size of an element
is normally established).
In IIO we have variable 'scans' as our records in which any element
can be present or not. They do not however vary when we are
actually filling or reading from the buffer. Thus we have a fixed
record size whenever we are actually running. As setup and tear
down are not in the fast path we can take the overhead of reinitializing
the kfifo every time.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
(a) For better readability, replace 0 with IIO_CHAN_INFO_RAW.
(b) Make same line-format as other apis()
: iio_read_channel_scale() and iio_read_channel_offset()
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Most devices from the Analog Devices Sigma Delta family use a similar scheme for
communication with the device. This includes register access, as well as trigger
handling. But each device sub-family has different features and different
register layouts (some even have no registers at all) and thus it is impractical
to try to support all of the devices by the same driver. This patch adds a
common base library for Sigma Delta converter devices. It will be used by
individual drivers.
This code is mostly based on the three existing Sigma Delta drivers the AD7192,
AD7780 and AD7793, but has been improved for more robustness and flexibility.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fix below build warnings:
CC [M] drivers/iio/light/lm3533-als.o
drivers/iio/light/lm3533-als.c:667:8: warning: initialization from incompatible pointer type [enabled by default]
drivers/iio/light/lm3533-als.c:667:8: warning: (near initialization for 'dev_attr_in_illuminance0_thresh_either_en.show') [enabled by default]
drivers/iio/light/lm3533-als.c:667:8: warning: initialization from incompatible pointer type [enabled by default]
drivers/iio/light/lm3533-als.c:667:8: warning: (near initialization for 'dev_attr_in_illuminance0_thresh_either_en.store') [enabled by default]
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Do not leak memory by updating pointer with potentially NULL realloc return value.
There is no need to preserve data in the buffer,
so replace krealloc() by kfree()-kmalloc() pair.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
With small channel spacing values and high reference frequencies it is
possible to exceed the range of the 10-bit counter.
Workaround by checking the range and widening some constrains.
We don't use the REG1_PHASE value in this case the datasheet recommends to set
it to 1 if not used.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The various devm_ functions allocate memory that is released when a driver
detaches. This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.
The call to platform_get_resource(pdev, IORESOURCE_MEM, 0) is moved coser
to the call to devm_request_and_ioremap, which is th first use of the
result of platform_get_resource.
This does not use devm_request_irq to ensure that free_irq is executed
before its idev argument is freed.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
fix compile warning reported by Fengguang Wu:
drivers/iio/light/adjd_s311.c: In function 'adjd_s311_trigger_handler':
drivers/iio/light/adjd_s311.c:188:12: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/iio/light/adjd_s311.c:188:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
185 }
186
187 if (indio_dev->scan_timestamp)
> 188 *(s64 *)((phys_addr_t)data->buffer + ALIGN(len, sizeof(s64)))
189 = time_ns;
190 iio_push_to_buffer(buffer, (u8 *)data->buffer, time_ns);
191
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=5L5b
-----END PGP SIGNATURE-----
Merge tag 'togreg-3.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
IIO: One new driver and a couple of nice cleanups.
We should be holding the mutex when we goto error_free_chans.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Move the SPI and I2C specific write callbacks to the respective
"#if IS_ENABLED(CONFIG_SPI_MASTER)" and "#if IS_ENABLED(CONFIG_I2C)"
protected sections of the code.
This fixes the following warning which occurs if CONFIG_I2C is not set:
drivers/iio/dac/ad5064.c: In function ‘ad5064_i2c_write’:
drivers/iio/dac/ad5064.c:132: error: implicit declaration of function ‘i2c_master_send’
And the follwing warning which occurs when CONFIG_SPI_MASTER is not set:
drivers/iio/dac/ad5064.c:137: warning: ‘ad5064_spi_write’ defined but not used
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
sensor has 4 channels (10-bit each, R/G/B and clear), sensitivity
and gain is controlled in the driver by ext_info integration_time
and CHAN_INFO_HARDWAREGAIN
driver supports triggered buffer and IIO_CHAN_INFO_RAW to get the
sensor data
v5: address comments by Jonathan Cameron
* use macro for channel declaration
* get timestamp right before measurement
* cleanups
v4: address comments by Lars-Peter Clausen
* make sure trigger handler is exited with iio_trigger_notify_done()
and IRQ_HANDLED
* kfree()/kalloc() -> krealloc()
v3:
* fix warnings
v2: address comments by Lars-Peter Clausen
* buffer allocation now in update_scan_mode instead of in trigger
handler
* simplify trigger code (assume active_scan_mask is not empty, use
for_each_set_bit, use iio_push_to_buffer)
* reorder entry in Makefile and Kconfig
* fix remove
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add iio channel type and modifiers for Correlated Color Temperature (CCT)
and RGBC (red/green/blue/clear) data.
Add CCT and RGBC descriptions to documentation.
Changes:
Revised/condensed RGBC descriptions.
Merge and trivial fix done by Jonathan Cameron.
Signed-off-by: Jon Brenner <jbrenner@taosinc.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Nothing terribly interesting in this one.
8 July 2012
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=ihIe
-----END PGP SIGNATURE-----
Merge tag 'togreg_8_7_2012' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Mixed back of updates and trivial examples fixes.
Nothing terribly interesting in this one.
8 July 2012
Add a helper function for validating a scan mask for devices where exactly one
channel must be selected during sampling. This is a common case among devices
which have scan mask restrictions so it makes sense to provide this function in
the core.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This is useful for cases where the number of valid scan masks grows
exponentially, but it is rather easy to check whether a mask is valid or not
programmatically.
An example of such a case is a device with multiple ADCs where each ADC has a
upstream MUX, which allows to select from a number of physical channels.
+-------+ +-------+
| | | | --- Channel 1
| ADC 1 |---| MUX 1 | --- ...
| | | | --- Channel M
+-------+ +-------+
. . .
. . .
. . .
+-------+ +-------+
| | | | --- Channel M * N + 1
| ADC N |---| MUX N | --- ...
| | | | --- Channel M * N + M
+-------+ +-------+
The number of necessary scan masks for this case is (M+1)**N - 1, on the other
hand it is easy to check whether subsets for each ADC of the scanmask have only
one bit set.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The dev_attr list is initialized in __iio_add_event_config_attrs which
is called only when indio_dev->channels is true. Nevertheless the list
is used unconditionally later in iio_device_register_eventset which
results in a NULL pointer exception. To fix this unconditionally
initialize the list in iio_device_register_eventset.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The channel set assigned to the iio device is not necessarily the same has the
channel set passed to iio_buffer_register. So to avoid possible complications
always work with the channel set pass to iio_buffer_register and ignore the
channel set assigned to the iio device.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The name sysfs attribute is the same for all triggers, so there is no need to
register them dynamically at runtime. Create a attribute group for it and set it
up for the bus attribute group. This also avoids a possible race condition
where the uevent for the device is sent before the name sysfs attribute has been
added.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
There will probably be a number of such modifiers eventually but
this one is used in the adis16240 accelerometer driver.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
There will probably be a number of such modifiers eventually but
this one is used in the adis16204 accelerometer driver.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
These were originally introduced when the plan was to have parallel
IIO cores in and out of staging with a slow move between them.
Now we have reached the point where the whole core has moved,
they need clearing up!
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The ad5629r and ad5669r are the I2C variants of the ad5628 and ad5668. Since the
ad5064 driver currently only supports SPI based devices the major part of this
patch focuses on adding support for I2C based devices. Adding support for the
actual parts boils down to adding entries for them to the device id table.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch adds support for the Analog Devices AD7265 and AD7266
Analog-to-Digital converters.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch adds support for the Analog Devices AD5450/51/52/53 Digital-to-Analog
converters.
The AD5452 and AD5453 are software compatible to the existing AD5444 and AD5446.
The AD5450 and AD5451 are similar but have a smaller resolution.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This issue was reported by the mini_lock.cocci coccinelle semantic patch.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This picks up the staging changes made in 3.5-rc4 so that everyone can sync up
properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use to_iio_trigger(dev) instead of dev_get_drvdata(dev). Both will return the
trigger which belongs to the device, but the the first on is a bit more
lightweight.
Since this is the last location where we used dev_get_drvdata() for retrieving
the trigger there is no need anymore to assign the the trigger to the devices
drvdata, so we can remove that as well.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
minimal driver, no IR current control and proximity/event
handling yet
v5:
* checkpatch warnings
* increase msleep() to 20 ms when waiting for data ready as
measurement/conversion can take up to 100 ms, 1 ms is too short
v4 (address comments by Jonathan Cameron)
* remove SENSORS_ prefix in Kconfig
* change from IIO_INTENSITY to IIO_LIGHT
* move from staging
v3 (address comments by Shubhrajyoti Datta)
* cleanup Kconfig entry
* call I2C read/write functions directly
v2 (address comments by Lars-Peter Clausen and Jonathan Cameron)
* unify code for reading PS and AL data into
parameterized _measure() function
* limit wait for data to become ready within 20 tries
* drop IIO_LIGHT channel, add SCALE to IIO_INTENSITY
* drop extra string arguments used for logging purpose only
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a helper function for executing the common tasks which are usually involved
in setting up a simple software ringbuffer. It will allocate the buffer,
allocate the pollfunc and register the buffer.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is not always the case that all channels can be used in buffered mode. This
patch allows channels, which can not be used in buffered mode, to set their scan
index to a negative number, which will cause iio_buffer_register to ignore the
channel.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio_scan_mask_match() returns NULL if the passed in scan mask is empty. This
will happen if no channel has been selected and buffer is enabled.
iio_sw_buffer_preenable() will assign NULL to indio_dev->active_scan_mask in
this case. As a result iio_update_demux() will cause a NULL pointer deref,
because it expects active_scan_mask to be non-NULL.
Since it does not make much sense to start data capture if there is no data to
capture this patch updates the code to fail gracefully in iio_scan_mask_match()
instead of crashing the kernel.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The documentation lives in drivers/staging/iio/Documentation, but
according to Jonathan it's obsolete and needs fixing.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need this for the pstore fixes that went into the staging-linus branch, so
that things apply properly for the pstore/android code merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/iio/frequency/ad9523.c:378 ad9523_vco_out_map()
warn: value 2 can't fit into 1 'out'
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
v5:
* fix warnings (Jonathan Cameron)
v4:
* remove unused indio_dev pointer in mcp4725_data (Jonathan Cameron)
* use u16 instead of unsigned short in mcp4725_data (Jonathan Cameron)
* #include mcp4725.h from linux/iio/dac/
v3:
* move from staging to drivers/iio
* switch to chan_spec
* dev_get_drvdata() -> dev_to_iio_dev()
* annotate probe() and remove() with __devinit and __devexit
v2 (based on comments from Jonathan Cameron and Lars-Peter Clausen):
* did NOT switch to chan_spec yet
* rebase to staging-next tree, update iio header locations
* dropped dac.h #include, not needed
* strict_strtol() -> kstrtol()
* call iio_device_unregister() in remove()
* everything in one patch
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GCC complains that we use an uninitialized variable if the user passes
an invalid parameter to adf4350_read(). I decided that we should return
-EINVAL instead in that case.
However, when I looked up at adf4350_write() it returned -ENODEV for
that condition. In the end, I decided the -EINVAL was the right thing
and I change adf4350_write() to match.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse complains about this:
drivers/iio/frequency/adf4350.c:58:29: warning: Initializer entry defined twice
drivers/iio/frequency/adf4350.c:59:10: also defined here
It looks like '|' was intended here instead of ','.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was a return path which got missed accidentally.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use scnprint instead of snprintf, because snprintf returns the number of bytes
that would have been written to the buffer if there was enough space, and as a
result writing to buf[len-1] might cause a access beyond the buffers limits.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/iio/frequency/adf4350.c:316:32: warning: ‘val’ may be used uninitialized in this function
[-Wuninitialized]
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IIO DAC drivers are in a reasonably good shape. They all make use of channel
spec and non of them provides non-documented sysfs attributes. Code style should
be OK as well, both checkpatch and coccicheck only report trivial issues.
So lets move the whole folder out of staging.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We often have the case were we do have a enum style channel attribute. These
attributes have in common that they are a list of string values which usually
map in a 1-to-1 fashion to integer values.
This patch implements some common helper code for implementing enum style
channel attributes using extended channel attributes. The helper functions take
care of converting between the string and integer values, as well providing a
function for "_available" attributes which list all available enum items.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use iio_device_get and iio_device_put instead of open-coding it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes since V1:
Apply Jonathan's review feedback:
Introduce and use IIO_ALTVOLTAGE.
Fix up comments and documentation.
Remove dead code.
Reorder some code fragments.
Add missing iio_device_free.
Convert to new API.
Fix-up out of staging includes.
Removed pll_locked attribute.
Changes since V2:
Use module_spi_driver.
adf4350_remove: move gpio_free after regulator.
target patch to drivers/iio
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes since V1:
Apply Jonathan's review feedback:
Revise device status attribute names, and split documentation into two sections.
Add additional comments, and fix indention issues.
Remove pointless zero initializations.
Revise return value handling.
Simplify some code sections.
Split store_eeprom and sync handling into separate functions.
Use strtobool where applicable.
Document platform data structures using kernel-doc style.
Use dev_to_iio_dev
write_raw IIO_CHAN_INFO_FREQUENCY: Reject values <= 0
Make patch target drivers/iio
Changes since V2:
Use for_each_clear_bit() and __set_bit() where applicable.
Add descriptive comment.
Avoid temporary for struct regulator.
spi_device_id name use ad9523-1, ad9523 will be added later.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no guarantee that the last reference to the iio device has already been
dropped when iio_device_free is called. This means that we can up calling
iio_dev_release after iio_device_free which will lead to a use after free. As
the general rule the struct containing the device should always be freed in the
release callback.
This is what this patch does, it moves freeing the iio device struct as well as
releasing the idr reference to the release callback. To ensure that the device
is not freed before calling iio_device_free the device_unregister call in
iio_device_unregister is broken apart. iio_device_unregister will now only call
device_del to remove the device from the system and iio_device_free will call
put_device to drop the reference we obtained in iio_devce_alloc.
We also have to take care that calling iio_device_free without having called
iio_device_register still works (i.e. this can happen if something failed during
device initialization). For this to work properly two minor changes were
necessary: channel_attr_list needs to be initialized in iio_device_alloc and we
have to check whether the chrdev has been registered before releasing it in
iio_device_release.
This change also brings iio_device_unregister and iio_device_free more in sync
with iio_device_register and iio_device_alloc which call device_add and
device_initialize respectively.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add sub-driver for the ambient-light-sensor interface on National
Semiconductor / TI LM3533 lighting power chips.
The sensor interface can be used to control the LEDs and backlights of
the chip through defining five light zones and three sets of
corresponding output-current values.
The driver provides raw and mean adc readings along with the current
light zone through sysfs. A threshold event can be generated on zone
changes. The ALS-control output values can be set per zone for the three
current output channels.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the ADC driver for Atmel's AT91SAM9G20-EK, AT91SAM9M10G45-EK
and AT91SAM9X5 family boards.
It has support for both software and hardware triggers.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes since V1:
Apply review feedback:
Introduce and use IIO_CHAN_INFO_HARDWAREGAIN
Introduce and use Use IIO_VAL_INT_PLUS_MICRO_DB
Modify out of staging include paths.
Convert to new iio core API naming.
Changes since V2:
more sanity checking in write_raw
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If defined CONFIG_DEBUG_FS, debugfs_create_dir returns NULL on failure.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use simple_open to replace iio_debugfs_open.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is currently no user, but we might need it in future.
So better add it now, before we have to convert drivers afterwards.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently we use two different naming schemes in the IIO API, iio_verb_object
and iio_object_verb. E.g iio_device_register and iio_allocate_device. This
patches renames instances of the later to the former. The patch also renames allocate to
alloc as this seems to be the preferred form throughout the kernel.
In particular the following renames are performed by the patch:
iio_put_device -> iio_device_put
iio_allocate_device -> iio_device_alloc
iio_free_device -> iio_device_free
iio_get_trigger -> iio_trigger_get
iio_put_trigger -> iio_trigger_put
iio_allocate_trigger -> iio_trigger_alloc
iio_free_trigger -> iio_trigger_free
The conversion was done with the following coccinelle patch with manual fixes to
comments and documentation.
<smpl>
@@
@@
-iio_put_device
+iio_device_put
@@
@@
-iio_allocate_device
+iio_device_alloc
@@
@@
-iio_free_device
+iio_device_free
@@
@@
-iio_get_trigger
+iio_trigger_get
@@
@@
-iio_put_trigger
+iio_trigger_put
@@
@@
-iio_allocate_trigger
+iio_trigger_alloc
@@
@@
-iio_free_trigger
+iio_trigger_free
</smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Take the core support + the kfifo buffer implentation out of
staging. Whilst we are far from done in improving this subsystem
it is now at a stage where the userspae interfaces (provided by
the core) can be considered stable.
Drivers will follow over a longer time scale.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>