Originally, due to the restriction from PSP and SMU, VF has
to send message to hypervisor driver to handle powerplay
change which is complicated and redundant. Currently, SMU
and PSP can support VF to directly handle powerplay
change by itself. Therefore, the old code about the handshake
between VF and PF to handle powerplay will be removed and VF
will use new the registers below to handshake with SMU.
mmMP1_SMN_C2PMSG_101: register to handle SMU message
mmMP1_SMN_C2PMSG_102: register to handle SMU parameter
mmMP1_SMN_C2PMSG_103: register to handle SMU response
v2: remove module parameter pp_one_vf
v3: fix the parens
v4: forbid vf to change smu feature
v5: use hwmon_attributes_visible to skip sepicified hwmon atrribute
v6: change skip condition at vega10_copy_table_to_smc
Signed-off-by: Yintian Tao <yttao@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the unit of variable AverageGfxActivity defined in smu12 metrics
struct is centi, so the retrieved value should be divided by 100 before
return.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
implement smu12 get_clk_freq interface to get clock frequency like
MCLK/SCLK.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add sensor interface of get gpu temperature for debugfs.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is needed for coming asic init on performing gpu reset.
V2: use non-asic specific programing way
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Abort the message issuing if the SMU was not in the right state.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the check may be done with purpose and the warning
output will be confusing.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
BACO feature must be kept enabled to allow entry into
BACO state in SMU during runtime suspend.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop smu_send_smc_msg function from ASIC specify structure.
Reuse smu_send_smc_msg_with_param function for smu_send_smc_msg.
Set paramer to 0 for smu_send_msg function, otherwise it will send
with previous paramer value (Not a certain value).
Materialize msg type for smu send message function definition.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For boards greater than ARCTURUS, and under sriov platform,
swSMU is not supported because smu ip block is commented at
guest driver.
Generally for sriov, initialization of smu is moved to host driver.
Thus, smu sw_init and hw_init will not be executed at guest driver.
Without sw structure being initialized in guest driver, swSMU cannot
declare to be supported.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/vegam_smumgr.c:
In function vegam_populate_clock_stretcher_data_table:
drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/vegam_smumgr.c:1489:29:
warning: variable stretch_amount2 set but not used [-Wunused-but-set-variable]
It is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variables HiSidd and LoSidd are being initialized with values that
are never read and are being updated a little later with a new value.
The initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
BACO - Bus Active, Chip Off
So we can use it for power savings rather than just reset.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To get the value of gpu_busy_percent, it needs to realize
get_current_activity_percent and get_metrics_table.
The framework of renoir smu is different from old ones like raven. It
needs to realize get_current_activity_percent and get_metrics_table in
renoir_ppt.c like navi10.
v2: remove unused variable (Alex)
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can fix the compile errors below:
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c: In function ‘smu_v11_0_baco_set_state’:
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:1674:27: error: implicit declaration of function ‘amdgpu_ras_get_context’ [-Werror=implicit-function-declaration]
struct amdgpu_ras *ras = amdgpu_ras_get_context(adev);
^
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:1674:27: warning: initialization makes pointer from integer without a cast [-Wint-conversion]
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:1692:19: error: dereferencing pointer to incomplete type ‘struct amdgpu_ras’
if (!ras || !ras->supported) {
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable baco reset support on Arcturus.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added bif doorbell interrupt setting and applied different
settings for BACO reset for RAS recovery.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that the setting reflects what the hw supports. This will
be used in a subsequent patch so needs to be correct.
v2: squash in fix from Colin Ian King
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205497
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
return errno code to caller when error occur, and meanwhile
remove gcc '-Wunused-but-set-variable' warning.
drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/vegam_smumgr.c: In function vegam_populate_smc_boot_level:
drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/vegam_smumgr.c:1364:6: warning: variable result set but not used [-Wunused-but-set-variable]
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For fine grained dpm, there is only two levels supported. However
to reflect correctly the current clock frequency, there is an
intermediate level faked. Thus on forcing level setting, we
need to treat level 2 correctly as level 1.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, the error message prompted will confuse user.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RunBTC is added for Navi ASIC on hardware setup.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, without RLC reinitialization, the DPM reenablement
will fail. That affects the custom pptable uploading.
V2: setting/clearing uploading_custom_pp_table in
smu_sys_set_pp_table()
Reported-by: Matt Coffin <mcoffin13@gmail.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Matt Coffin <mcoffin13@gmail.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By using its own IP block type.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By using its own JPEG PowerUp and PowerDown messages
v2: add argument to PowerDownJpeg message
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to SDMA, VCN etc.
v2: add argument to both PowerUpJpeg and PowerDownJpeg messages
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By separating the JPEG power feature, and using its
own PowerUp and PowerDown messages
v2: remove PowerUpJpeg message argument
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It will be used for different SMU specific to HW
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c: In
function ‘vegam_populate_smc_acpi_level’:
drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c:1117:11:
warning: variable 'us_mvdd' set but not used [-Wunused-but-set-variable]
It is never used, so can be removed.
Fixes: ac7822b002 ("drm/amd/powerplay: add smumgr support for VEGAM (v2)")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c: In function fiji_populate_single_graphic_level:
drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c:943:11: warning: variable threshold set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c: In function fiji_populate_memory_timing_parameters:
drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c:1504:8: warning: variable state set but not used [-Wunused-but-set-variable]
They are introduced by commit 2e112b4ae3 ("drm/amd/pp:
remove fiji_smc/smumgr split."), but never used,
so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c: In function vega10_get_performance_level:
drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c:5217:23: warning: variable data set but not used [-Wunused-but-set-variable]
'data' is introduced by commit f688b614b6 ("drm/amd/pp:
Implement get_performance_level for legacy dgpu"), but never used,
so remove it.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c: In function smu7_check_mc_firmware:
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:4215:11: warning: variable vbios_version set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c: In function smu7_get_performance_level:
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:5054:21: warning: variable data set but not used [-Wunused-but-set-variable]
'vbios_version' is introduced by commit 599a7e9fe1 ("drm/amd/powerplay:
implement smu7 hwmgr to manager asics with smu ip version 7."),
but never used, so remove it.
'data' is introduced by commit f688b614b6 ("drm/amd/pp:
Implement get_performance_level for legacy dgpu"), but never used,
so remove it.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sysfs interface to read pcie speed&width info on navi1x.
v2: fix warning (trivial)
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On Navi10, and presumably arcterus, updating pp_table via sysfs would
not re-scale the maximum possible power limit one can set. On navi10,
the SMU code ignored the power percentage overdrive setting entirely,
and would not allow you to exceed the default power limit at all.
[How]
Adding a function to the SMU interface to get the pptable version of the
default power limit allows ASIC-specific code to provide the correct
maximum-settable power limit for the current pptable.
v3: fix spelling (Alex)
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Before this patch, navi10 overdrive settings could not be printed via
pp_od_clk_voltage
[How]
Implement printing for the overdrive settings for the following clocks
in navi10's ppt print_clk_levels implementation:
* SMU_OD_SCLK
* SMU_OD_MCLK
* SMU_OD_VDDC_CURVE
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Before this patch, there was no way to set the gfxclk voltage curve in
the overdrive settings for navi10 through pp_od_clk_voltage
[How]
Add the required implementation to navi10's ppt dpm table editing
implementation, similar to the vega20 implementation and interface.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Before this patch, there was no way to use pp_od_clk_voltage on navi
[How]
Similar to the vega20 implementation, but using the common smc_v11_0
headers, implemented the pp_od_clk_voltage API for navi10's pptable
implementation
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a custom powerplay table is provided, we need to update
the OD VDDC flag to avoid AVFS being enabled when it shouldn't be.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205393
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a custom powerplay table is provided, we need to update
the OD VDDC flag to avoid AVFS being enabled when it shouldn't be.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205393
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is to improve the performance in the compute mode
for vega10. For example, the original performance for a rocm
bandwidth test: 2G internal GPU copy, is about 99GB/s.
With the idle power features disabled dynamically, the porformance
is promoted to about 215GB/s.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
OD is not supported on Arcturus. Thus the
pp_od_clk_voltage sysfs interface is also not supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
