Some backend devices claim to support write-same,
but would fail actual write-same requests.
Allow to set (or toggle) whether or not DRBD tries to support write-same.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The conn_higest_role() (a terribly misnamed function) returns
the role of the resource. It returned R_UNKNOWN as long as the
resource has not a single device.
Resources without devices are short living objects.
But it matters for the NOTIFY_CREATE netwlink message. It makes
a lot more sense to report R_SECONDARY for the newly created
resource than R_UNKNOWN.
I reviewd all call sites of conn_highest_role(), that change
does not matter for the other call sites.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We get a few warnings when building kernel with W=1:
drbd/drbd_receiver.c:1224:6: warning: no previous prototype for 'one_flush_endio' [-Wmissing-prototypes]
drbd/drbd_req.c:1450:6: warning: no previous prototype for 'send_and_submit_pending' [-Wmissing-prototypes]
drbd/drbd_main.c:924:6: warning: no previous prototype for 'assign_p_sizes_qlim' [-Wmissing-prototypes]
....
In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In protocol != C, we forgot to send the P_NEG_ACK for failing writes.
Once we no longer submit to local disk, because we already "detached",
due to the typical "on-io-error detach;" config setting,
we already send the neg acks right away.
Only those requests that have been submitted,
and have been error-completed by the local disk,
would forget to send the neg-ack,
and only in asynchronous replication (protocol != C).
Unless this happened during resync,
where we already always send acks, regardless of protocol.
The primary side needs the P_NEG_ACK in order to mark
the affected block(s) for resync in its out-of-sync bitmap.
If the blocks in question are not re-written again,
we may miss to resync them later, causing data inconsistencies.
This patch will always send the neg-acks, and also at least try to
persist the out-of-sync status on the local node already.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When submitting batches of requests which had been queued on the
submitter thread, typically because they needed to wait for an
activity log transactions, use explicit plugging to help potential
merging of requests in the backend io-scheduler.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Two instances of list_for_each_safe can drop their tmp element, they
really just peel off each element in turn from the start of the list.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Recently, drbd_recv_header() was changed to potentially
implicitly "unplug" the backend device(s), in case there
is currently nothing to receive.
Be more explicit about it: re-introduce the original drbd_recv_header(),
and introduce a new drbd_recv_header_maybe_unplug() for use by the
receiver "main loop".
Using explicit plugging via blk_start_plug(); blk_finish_plug();
really helps the io-scheduler of the backend with merging requests.
Wrap the receiver "main loop" with such a plug.
Also catch unplug events on the Primary,
and try to propagate.
This is performance relevant. Without this, if the receiving side does
not merge requests, number of IOPS on the peer can me significantly
higher than IOPS on the Primary, and can easily become the bottleneck.
Together, both changes should help to reduce the number of IOPS
as seen on the backend of the receiving side, by increasing
the chance of merging mergable requests, without trading latency
for more throughput.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since blk_mq_init_queue() initializes .nr_requests to the tag set
size and since that value is a good default for the skd driver, do
not overwrite the value set by blk_mq_init_queue(). This change
doubles the default value of .nr_requests.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since sTec s1120 devices support 64-bit DMA it is not necessary
to request data buffer bouncing. Hence remove the
blk_queue_bounce_limit() call.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull xen-blkback fix from Konrad:
"[...] A bug-fix when shutting down xen block backend driver with
multiple queues and the driver not clearing all of them."
struct call_single_data is used in IPIs to transfer information between
CPUs. Its size is bigger than sizeof(unsigned long) and less than
cache line size. Currently it is not allocated with any explicit alignment
requirements. This makes it possible for allocated call_single_data to
cross two cache lines, which results in double the number of the cache lines
that need to be transferred among CPUs.
This can be fixed by requiring call_single_data to be aligned with the
size of call_single_data. Currently the size of call_single_data is the
power of 2. If we add new fields to call_single_data, we may need to
add padding to make sure the size of new definition is the power of 2
as well.
Fortunately, this is enforced by GCC, which will report bad sizes.
To set alignment requirements of call_single_data to the size of
call_single_data, a struct definition and a typedef is used.
To test the effect of the patch, I used the vm-scalability multiple
thread swap test case (swap-w-seq-mt). The test will create multiple
threads and each thread will eat memory until all RAM and part of swap
is used, so that huge number of IPIs are triggered when unmapping
memory. In the test, the throughput of memory writing improves ~5%
compared with misaligned call_single_data, because of faster IPIs.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Huang, Ying <ying.huang@intel.com>
[ Add call_single_data_t and align with size of call_single_data. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/87bmnqd6lz.fsf@yhuang-mobile.sh.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make this const as is is only passed as an argument to the
function device_create_file and device_remove_file and the corresponding
arguments are of type const.
Done using Coccinelle
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 2984c86(nullb: factor disk parameters) has a typo. The
nullb_device allocation/free is done outside of null_add_dev. The commit
accidentally frees the nullb_device in error code path.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes two obvious bugs in virtio pci.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZoG+uAAoJECgfDbjSjVRpvAMIAIoONNPd53SPKDVuyU1ycz7H
hRVJ9dgVqsCyJV7UQNXznTkk1Te+todM3eBOnnWGxBUPyyjjn+nRJY8ObzvPZNtr
GZjBHhuCeWAi1HPcGk3VKFCXB9yzVc7x91YoSZRWRveB1hOoqWCNccuXMlOf1mLC
AAYMdBR7JH9CTA5v73z0n4XmfDPFja9g5qhv3JxYypzS3IrWglsVV8RFFG94zJys
qsg3Ys6SdYnC4whdtT0sdj6zcVV3STqLtutUcWzpBJiPwL+TYprOtGxhjhjG/YdP
vurTYmMk1FZyTlxflfzH0yIRQVZyxARcPGrchhvFv9eE4qN0y4E72FkN8UyyKpU=
=qTWW
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Fixes two obvious bugs in virtio pci"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_pci: fix cpu affinity support
virtio_blk: fix incorrect message when disk is resized
The SKD_ID_INCR flag in skd_request_context.id duplicates information
that is already available otherwise, e.g. through the block layer
request state and through skd_request_context.state. Hence remove
the code that manipulates this flag and also the flag itself.
Since skd_isr_completion_posted() only uses the lower bits of
skd_request_context.id as hardware tag, this patch does not change
the behavior of the skd driver. I'm referring to the following code:
tag = req_id & SKD_ID_SLOT_AND_TABLE_MASK;
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Although it is easy to see that skdev->disk != NULL if skdev->queue
!= NULL, add a test for skdev->disk to avoid that smatch reports the
following warning:
drivers/block/skd_main.c:3080 skd_free_disk()
error: we previously assumed 'disk' could be null (see line 3074)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is not worth to keep the debug statements in skd_end_request().
Without debug statements that function only consists of two
statements. Hence inline skd_end_request().
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The latter name follows more closely the function names used in
other blk-mq drivers.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dan reported this:
The patch 2984c8684f96: "nullb: factor disk parameters" from Aug 14,
2017, leads to the following Smatch complaint:
drivers/block/null_blk.c:1759 null_init_tag_set()
error: we previously assumed 'nullb' could be null (see line
1750)
1755 set->cmd_size = sizeof(struct nullb_cmd);
1756 set->flags = BLK_MQ_F_SHOULD_MERGE;
1757 set->driver_data = NULL;
1758
1759 if (nullb->dev->blocking)
^^^^^^^^^^^^^^^^^^^^
And an unchecked dereference.
nullb could be NULL here.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In xen_blkif_disconnect, before checking inflight I/O, following code
stops the blkback thread,
if (ring->xenblkd) {
kthread_stop(ring->xenblkd);
wake_up(&ring->shutdown_wq);
}
If there is inflight I/O in any non-last queue, blkback returns -EBUSY
directly, and above code would not be called to stop thread of remaining
queue and processs them. When removing vbd device with lots of disk I/O
load, some queues with inflight I/O still have blkback thread running even
though the corresponding vbd device or guest is gone.
And this could cause some problems, for example, if the backend device type
is file, some loop devices and blkback thread always lingers there forever
after guest is destroyed, and this causes failure of umounting repositories
unless rebooting the dom0.
This patch allows thread of every queue has the chance to get stopped.
Otherwise, only thread of queue previous to(including) first busy one get
stopped, blkthread of remaining queue will still run. So stop all threads
properly and return -EBUSY if any queue has inflight I/O.
Signed-off-by: Annie Li <annie.li@oracle.com>
Reviewed-by: Herbert van den Bergh <herbert.van.den.bergh@oracle.com>
Reviewed-by: Bhavesh Davda <bhavesh.davda@oracle.com>
Reviewed-by: Adnan Misherfi <adnan.misherfi@oracle.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The message printed on disk resize is incorrect. The following is
printed when resizing to 2 GiB:
$ truncate -s 1G test.img
$ qemu -device virtio-blk-pci,logical_block_size=4096,...
(qemu) block_resize drive1 2G
virtio_blk virtio0: new size: 4194304 4096-byte logical blocks (17.2 GB/16.0 GiB)
The virtio_blk capacity config field is in 512-byte sector units
regardless of logical_block_size as per the VIRTIO specification.
Therefore the message should read:
virtio_blk virtio0: new size: 524288 4096-byte logical blocks (2.15 GB/2.0 GiB)
Note that this only affects the printed message. Thankfully the actual
block device has the correct size because the block layer expects
capacity in sectors.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The hpsa driver now has support for all boards the cciss driver
used to support, so this patch removes the cciss driver and
make hpsa an alias to cciss.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lguest seems to be rather unused these days. It has seen only patches
ensuring it still builds the last two years and its official state is
"Odd Fixes".
Remove it in order to be able to clean up the paravirt code.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: boris.ostrovsky@oracle.com
Cc: lguest@lists.ozlabs.org
Cc: rusty@rustcorp.com.au
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/20170816173157.8633-3-jgross@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There's some stuff still up in the air, let's not get stuck with a
subpar ABI. I'll follow up with something better for 4.14.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since MSI support on some motherboards is unreliable, change the
default interrupt mode from MSI to MSI-X. This patch avoids that
the following message appears sporadially in the kernel logs of
my test setup:
do_IRQ: 3.193 No irq handler for vector
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid that normal request completion and the timeout handler can
run concurrently by calling blk_mq_complete_request() instead of
blk_mq_end_request() from skd_end_request(). Avoid that the block
layer can reuse a request while the firmware is still processing
it. Convert skd_softirq_done() to blk-mq. Pass the pointer to
skd_softirq_done() to the block layer core through
blk_mq_ops.complete instead of by calling blk_queue_softirq_done().
Pass the pointer to skd_timed_out() to the block layer core
through blk_mq_ops.timeout instead of by calling
blk_queue_timed_out(). The timeout handler has been tested as
follows:
echo 1 > /sys/block/skd0/io-timeout-fail &&
(cd /sys/kernel/debug/fail_io_timeout &&
echo 100 > probability &&
echo N > task-filter &&
echo 1 > times)
Fixes: commit a74d5b76fa ("skd: Switch to block layer timeout mechanism")
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch does not change any functionality but makes the skd
driver code more similar to that of other blk-mq kernel drivers.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch removes one debug statement but otherwise does not change
any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sometime disk could have tracks broken and data there is inaccessable,
but data in other parts can be accessed in normal way. MD RAID supports
such disks. But we don't have a good way to test it, because we can't
control which part of a physical disk is bad. For a virtual disk, this
can be easily controlled.
This patch adds a new 'badblock' attribute. Configure it in this way:
echo "+1-100" > xxx/badblock, this will make sector [1-100] as bad
blocks.
echo "-20-30" > xxx/badblock, this will make sector [20-30] good
If badblocks are accessed, the nullb disk will return IO error. Other
parts of the disk can accessed in normal way.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Software must flush disk cache to guarantee data safety. To check if
software correctly does disk cache flush, we must know the behavior of
disk. But physical disk behavior is uncontrollable. Even software
doesn't do the flush, the disk probably does the flush. This patch tries
to emulate a cache in the test disk.
All write will go to a cache first, when the cache is full, we then
flush some data to disk storage. A flush request will flush all data of
the cache to disk storage. A FUA write will write to memory store
directly and revalidate data in cache. If there is a power failure (by
writing to power attribute, 'echo 0 > disk_name/power'), we discard all
data in the cache, but preserve the data in disk storage. Later we can
power on the disk again as usual (write 1 to 'power' attribute), then we
can check data integrity and very if software does everything correctly.
A new attribute 'cache_size' (in MB) is added to configure cache size.
Based on original patch from Kyungchan Koh
Signed-off-by: Kyungchan Koh <kkc6196@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In test, we usually expect controllable disk speed. For example, in a
raid array, we'd like some disks are fast and some are slow. MD RAID
actually has a feature for this. To test the feature, we'd like to make
the disk run in specific speed.
block throttling probably can be used for this purpose, but it requires
cgroup setup. Here we just implement a simple throttling mechanism in
the driver. There is slight fluctuation in the mechanism, but it's good
enough for test.
To configure the bandwidth cap, user sets the 'mbps' attribute. mbps is
MB/s.
Based on original patch from Kyungchan Koh
Signed-off-by: Kyungchan Koh <kkc6196@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
discard makes sense for memory backed disk. And also it's useful to test
if upper layer supports dicard correctly.
User configures 'discard' attribute to enable/disable dicard support.
Based on original patch from Kyungchan Koh
Signed-off-by: Kyungchan Koh <kkc6196@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds memory backed store in nullb.
User configure 'memory_backed' attribute for this. By default, nullb
disk doesn't use memory backed store.
Based on original patch from Kyungchan Koh
Signed-off-by: Kyungchan Koh <kkc6196@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We now dynamically create disks. Managing the disk index with ida to
avoid bump up the index too much.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The device created in nullb configfs interface isn't power on by
default. After user configures the device, user can do 'echo 1 >
xxx/nullb/device_name/power' to power on the device, which will create a
disk. the xxx/nullb/device_name/index is the disk index, so if the index
is 2, the new created disk should be named as /dev/nullb2. Note, the
'index' is only valid after disk is power on.
'echo 0 > xxx/nullb/device_name/power' will remove the disk. Note, this
doesn't remove the device. To remove the device, user should do 'rmdir
xxx/nullb/device_name'. Removing the device will remove the disk too.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add configfs interface for nullb. configfs interface is more flexible
and easy to configure in a per-disk basis.
Configuration is something like this:
mount -t configfs none /mnt
Checking which features the driver supports:
cat /mnt/nullb/features
The 'features' attribute is for future extension. We probably will add
new features into the driver, userspace can check this attribute to find
the supported features.
Create/remove a device:
mkdir/rmdir /mnt/nullb/a
Then configure the device by setting attributes under /mnt/nullb/a, most
of nullb supported module parameters are converted to attributes:
size; /* device size in MB */
completion_nsec; /* time in ns to complete a request */
submit_queues; /* number of submission queues */
home_node; /* home node for the device */
queue_mode; /* block interface */
blocksize; /* block size */
irqmode; /* IRQ completion handler */
hw_queue_depth; /* queue depth */
use_lightnvm; /* register as a LightNVM device */
blocking; /* blocking blk-mq device */
use_per_node_hctx; /* use per-node allocation for hardware context */
Note, creating a device doesn't create a disk immediately. Creating a
disk is done in two phases: create a device and then power on the
device. Next patch will introduce device power on.
Based on original patch from Kyungchan Koh
Signed-off-by: Kyungchan Koh <kkc6196@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we switch to configfs interface, each disk could have different
configuration. To prepare for the change, we move most disk setting to a
separate data structure. The existing module parameter interface is
kept. The 'nr_devices' and 'shared_tags' don't make sense for per-disk
setting, so they are remained as global settings.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
My initial impulse was to check for IS_ERR_OR_NULL() but when I looked
at this code a bit more closely, we should only need to check for
IS_ERR().
The blk_mq_alloc_tag_set() returns negative error codes and zero on
success so we can just do an "if (rc) goto err_out;". It's better to
preserve the error code anyhow. The blk_mq_init_queue() returns error
pointers on failure, it never returns NULL. We can also remove the
"q = NULL;" at the start because that's no longer needed.
Fixes: ca33dd9296 ("skd: Convert to blk-mq")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Someone got too agressive about removing initializations and
accidentally removed the "rc = 0;" which is required.
Fixes: c830da8cbc ("skd: Remove superfluous initializations from skd_isr_completion_posted()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the driver version information because this information
is not useful in an upstream kernel driver.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bump the driver version. Remove the build ID because build IDs do
not make sense for an upstream kernel driver. Keep the driver
version in the module information but do not report it during every
load, unload or probe.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only take skdev->lock if necessary.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch does not change any functionality but makes the code
more brief.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Every single coherent DMA memory buffer occupies at least one page.
Reduce memory usage by switching from coherent buffers to streaming
DMA for I/O requests (struct skd_fitmsg_context) and S/G-lists
(struct fit_sg_descriptor[]).
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since skd_device.in_flight is only used to display the number of
in-flight requests in debug messages, remove that member and
introduce skd_in_flight(). That last function relies on the block
layer to determine the number of in flight requests.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the timeout slot variables and rely on the block layer to
detect request timeouts.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce a tag set and a blk_mq_ops structure. Set .cmd_size such
that struct request and struct skd_request_context are allocated
through a single allocation. Remove the skd_request_context.req
pointer. Make queue starting asynchronous such that this can occur
safely from interrupt context. Use locking to protect skdev->skmsg
and *skdev->skmsg against concurrent access from concurrent
.queue_rq() calls. Introduce the functions skd_init_request() and
skd_exit_request() to set up / clean up the per-request S/G-list.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set request_queue.cmd_size, introduce skd_init_rq() and skd_exit_rq()
and remove skd_device.skreq_table.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Issue a warning if a NULL argument is passed to skd_free_sg_list().
Move this function up to make the blk-mq conversion patch easier
to read.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch does not change any functionality but makes the blk-mq
conversion patch easier to read.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only functional change in this patch is that the skd_fitmsg_context
in which requests are accumulated is changed from a local variable into
a member of struct skd_device. This patch will make the blk-mq conversion
easier.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert the per-device scalar variables that are protected by the
queue lock into atomics such that it becomes safe to access these
variables without holding the queue lock.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the request tag when allocating a skd_fitmsg_context or
skd_request_context such that the lists used to track free elements
can be eliminated. Swap the skd_end_request() and skd_release_req()
calls to avoid triggering a use-after-free. Remove
skd_fitmsg_context.state and .outstanding because FIT messages are
shared among requests and because updating a FIT message after a
request has finished whould trigger a use-after-free.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The debug code in skd_send_special_fitmsg() assumes that req.n_sg
represents the number of S/G descriptors. However, skd_construct()
initializes that member variable to zero. Set req.n_sg to one such
that the debugging code in skd_send_special_fitmsg() works as
expected.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Removing the SG IO code also removed the code that sets
SKD_REQ_STATE_ABORTED. Hence also remove the code that checks for
this state.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The skd SG IO support duplicates the functionality of the bsg driver.
Hence remove it.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This will make it easier to convert this driver to the blk-mq
approach. This patch also reduces interrupt latency by moving
skd_request_fn() calls out of the skd_isr() interrupt.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the skd_fail_all_pending() call out of skd_request_fn_not_online()
such that this function can be reused in the blk-mq code path.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch does not change any functionality but makes the next
patch in this series easier to read.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mem_map[i] is accessed through readl() / writel() hence declaring
mem_map as volatile is not necessary.
Remove the volatile declarations from struct fit_completion_entry_v1
pointers and struct fit_comp_error_info since reading these structures
multiple times is safe.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since setup_timer() invokes init_timer(), invoking init_timer()
just before setup_timer() is redundant. Hence remove the init_timer()
call.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This change makes skd_preop_sg_list() support chained sg-lists.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since all callers pass zero as second argument to skd_recover_requests(),
drop that second argument.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The value of skcmp, cmp_cntxt etc. is overwritten during every
loop iteration and is not used after the loop has finished. Hence
initializing these variables outside the loop is not necessary.
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use DMA_FROM_DEVICE and DMA_TO_DEVICE directly instead of
introducing driver-private constants with the same numerical
value.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use ARRAY_SIZE() instead of open-coding it. This patch does not
change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since needless use of __packed slows down access to data structures,
only use __packed when needed.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch will help to verify the changes made by the next patch.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This change makes the source code easier to read.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dma_alloc_coherent() guarantees alignment on a page boundary so
no explicit alignment is needed to align on a 64 byte boundary.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Due to the previous patch it is guaranteed that the FIT msg contains
at least one request after the for-loop has finished. Use this to
simplify the code.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare the S/G-list before allocating a FIT msg such that the FIT
msg always contains at least one request after the for-loop is
finished.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the correct size to pci_free_consistent() in skd_free_skcomp().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure that sparse does not report any warnings when building the
skd driver with sparse verification enabled (C=1 or C=2).
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use dev_err() and dev_info() instead of pr_err() and pr_info().
Since dev_dbg() is able to report file name and line number
information, remove __FILE__ and __LINE__ from the dev_dbg() calls.
Remove the struct skd_device members and the function (skd_name())
that became superfluous due to these changes.
This patch removes the device name and serial number from log
statements. An example of the old log line format:
(skd0:STM000196603:[0000:00:09.0]): Driver state STARTING(3)=>ONLINE(4)
An example of the new log line format:
skd:0000:00:09.0: Driver state STARTING(3)=>ONLINE(4)
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The purpose of barrier() is to prevent reordering by the compiler.
Since the compiler does not reorder calls to non-pure functions,
remove the barrier() calls from skd_reg_{read,write}{32,64}().
Since pr_debug() is able to report file name and line number
information, remove __FILE__ and __LINE__ from the pr_debug() calls.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These variables have been detected by building with W=1. Declare
'acc' as __maybe_unused because most access_ok() implementations
ignore their first argument. This patch does not change any
functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no function skd_completion_posted_isr() in the skd driver
but there is a function called skd_isr_completion_posted(). Fix
the function name in the comment.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change "ptimal" into "optimal" and remove the misleading reference
to sysfs.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch does not change any functionality but makes the skd
driver source code more uniform with that of other kernel drivers.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the code guarded by #ifdef SKD_VMK_POLL_HANDLER / #endif
is never built on Linux systems, remove it.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
E-mails sent to support@stec-inc.com bounce. Hence remove that
e-mail address from the driver. Add an entry to the MAINTAINERS
file instead.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This change does not affect any skd driver version derived from a
dual licensed code base but makes all code derived from future
upstream skd driver versions GPLv2 only.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure that the members of struct skd_msg_buf have been transferred
to the PCIe adapter before the doorbell is triggered. This patch
avoids that I/O fails sporadically and that the following error
message is reported:
(skd0:STM000196603:[0000:00:09.0]): Completion mismatch comp_id=0x0000 skreq=0x0400 new=0x0000
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid that smatch reports the following warning when building with
C=2 CHECK="smatch -p=kernel":
drivers/block/xen-blkback/blkback.c:710 xen_blkbk_unmap_prepare() warn: inconsistent indenting
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Roger Pau Monn303251 <roger.pau@citrix.com>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's no reason to have partitions disabled for nbd by default, it costs us
nothing to have it enabled and is just confusing/obnoxious to users who try to
use partitions with nbd.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If users really want to use a particular index for their nbd device and it
doesn't already exist there's no reason we can't just create it for them. Do
this instead of erroring out.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Markus Elfring <elfring@users.sourceforge.net>
Cc: Jim Paris <jim@jtan.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Jim Paris <jim@jtan.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull xen block changes from Konrad:
Two fixes, both of them spotted by Amazon:
1) Fix in Xen-blkfront caused by the re-write in 4.8 time-frame.
2) Fix in the xen_biovec_phys_mergeable which allowed guest
requests when using NVMe - to slurp up more data than allowed
leading to an XSA (which has been made public today).
The early device registration made possible a race leading to allocations
of disks with wrong minors.
This patch moves the device registration further down the loop_init
function to make the race infeasible.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Volkov <avolkov@ispras.ru>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit d05d7f4079 ("Merge branch 'for-4.8/core' of
git://git.kernel.dk/linux-block") and 3fc9d69093 ("Merge branch
'for-4.8/drivers' of git://git.kernel.dk/linux-block"), blkfront_resume()
has been using an index for iterating ring_info to check request when
iterating blk_shadow in an inner loop. This seems to have been
accidentally introduced during the massive rewrite of the block layer
macros in the commits.
This may cause crash like this:
[11798.057074] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
[11798.058832] IP: [<ffffffff814411fa>] blkfront_resume+0x10a/0x610
....
[11798.061063] Call Trace:
[11798.061063] [<ffffffff8139ce93>] xenbus_dev_resume+0x53/0x140
[11798.061063] [<ffffffff8139ce40>] ? xenbus_dev_probe+0x150/0x150
[11798.061063] [<ffffffff813f359e>] dpm_run_callback+0x3e/0x110
[11798.061063] [<ffffffff813f3a08>] device_resume+0x88/0x190
[11798.061063] [<ffffffff813f4cc0>] dpm_resume+0x100/0x2d0
[11798.061063] [<ffffffff813f5221>] dpm_resume_end+0x11/0x20
[11798.061063] [<ffffffff813950a8>] do_suspend+0xe8/0x1a0
[11798.061063] [<ffffffff813954bd>] shutdown_handler+0xfd/0x130
[11798.061063] [<ffffffff8139aba0>] ? split+0x110/0x110
[11798.061063] [<ffffffff8139ac26>] xenwatch_thread+0x86/0x120
[11798.061063] [<ffffffff810b4570>] ? prepare_to_wait_event+0x110/0x110
[11798.061063] [<ffffffff8108fe57>] kthread+0xd7/0xf0
[11798.061063] [<ffffffff811da811>] ? kfree+0x121/0x170
[11798.061063] [<ffffffff8108fd80>] ? kthread_park+0x60/0x60
[11798.061063] [<ffffffff810863b0>] ? call_usermodehelper_exec_work+0xb0/0xb0
[11798.061063] [<ffffffff810864ea>] ? call_usermodehelper_exec_async+0x13a/0x140
[11798.061063] [<ffffffff81534a45>] ret_from_fork+0x25/0x30
Use the right index in the inner loop.
Fixes: d05d7f4079 ("Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-block")
Fixes: 3fc9d69093 ("Merge branch 'for-4.8/drivers' of git://git.kernel.dk/linux-block")
Signed-off-by: Munehisa Kamata <kamatam@amazon.com>
Reviewed-by: Thomas Friebel <friebelt@amazon.de>
Reviewed-by: Eduardo Valentin <eduval@amazon.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Roger Pau Monne <roger.pau@citrix.com>
Cc: xen-devel@lists.xenproject.org
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
comp_algorithm_store() passes the size of the source buffer to strlcpy()
instead of the destination buffer size. Make it explicit that the two
buffers have the same size and use strcpy() instead of strlcpy(). The
latter can be done safely since the function ensures that the string in
the source buffer is terminated.
Link: http://lkml.kernel.org/r/20170803163350.45245-1-mka@chromium.org
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using mpgroup to define multiple paths for a virtual disk causes multiple
virtual-device-port ports to be created for that virtual device.
Each virtual-device-port port then gets a vdisk created for it by the Linux
sunvdc driver. As mpgroup is not supported by the Linux sunvdc driver it
cannot handle multiple ports for a single vdisk, leading to a kernel panic
at startup.
This fix prevents more than one vdisk per virtual-device-port being created
until full virtual disk multipathing (mpgroup) support is implemented.
Signed-off-by: Jim Quigley <Jim.Quigley@oracle.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Aaron Young <aaron.young@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No functional change in this patch, just in preparation for
basing the inflight mechanism on the queue in question.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
set submit_queues to 1 by default, and make sure it's value > 0.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
gcc-7 points out that a large controller number would overflow the
string length for the procfs name and the firmware version string:
drivers/block/DAC960.c: In function 'DAC960_Probe':
drivers/block/DAC960.c:6591:38: warning: 'sprintf' may write a terminating nul past the end of the destination [-Wformat-overflow=]
drivers/block/DAC960.c: In function 'DAC960_V1_ReadControllerConfiguration':
drivers/block/DAC960.c:1681:40: error: '%02d' directive writing between 2 and 3 bytes into a region of size between 2 and 5 [-Werror=format-overflow=]
drivers/block/DAC960.c:1681:40: note: directive argument in the range [0, 255]
drivers/block/DAC960.c:1681:3: note: 'sprintf' output between 10 and 14 bytes into a destination of size 12
Both of these seem appropriately sized, and using snprintf()
instead of sprintf() improves this by ensuring that even
incorrect data won't cause undefined behavior here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block fixes from Jens Axboe:
"A small collection of fixes that should go into this series. This
contains:
- NVMe pull request from Christoph, with various fixes for nvme
proper and nvme-fc.
- disable runtime PM for blk-mq for now.
With scsi now defaulting to using blk-mq, this reared its head as
an issue. Longer term we'll fix up runtime PM for blk-mq, for now
just disable it to prevent a hang on laptop resume for some folks.
- blk-mq CPU <-> hw queue map fix from Christoph.
- xen/blkfront pull request from Konrad, with two small fixes for the
blkfront driver.
- a few fixups for nbd from Joseph.
- a stable fix for pblk from Javier"
* 'for-linus' of git://git.kernel.dk/linux-block:
lightnvm: pblk: advance bio according to lba index
nvme: validate admin queue before unquiesce
nbd: clear disconnected on reconnect
nvme-pci: fix HMB size calculation
nvme-fc: revise TRADDR parsing
nvme-fc: address target disconnect race conditions in fcp io submit
nvme: fabrics commands should use the fctype field for data direction
nvme: also provide a UUID in the WWID sysfs attribute
xen/blkfront: always allocate grants first from per-queue persistent grants
xen-blkfront: fix mq start/stop race
blk-mq: map queues to all present CPUs
block: disable runtime-pm for blk-mq
xen-blkfront: Fix handling of non-supported operations
nbd: only set sndtimeo if we have a timeout set
nbd: take tx_lock before disconnecting
nbd: allow multiple disconnects to be sent
If our device loses its connection for longer than the dead timeout we
will set NBD_DISCONNECTED in order to quickly fail any pending IO's that
flood in after the IO's that were waiting during the dead timer.
However if we re-connect at some point in the future we'll still see
this DISCONNECTED flag set if we then lose our connection again after
that, which means we won't get notifications for our newly lost
connections. Fix this by just clearing the DISCONNECTED flag on
reconnect in order to make sure everything works as it's supposed to.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch partially reverts 3df0e50 ("xen/blkfront: pseudo support for
multi hardware queues/rings"). The xen-blkfront queue/ring might hang due
to grants allocation failure in the situation when gnttab_free_head is
almost empty while many persistent grants are reserved for this queue/ring.
As persistent grants management was per-queue since 73716df ("xen/blkfront:
make persistent grants pool per-queue"), we should always allocate from
persistent grants first.
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
When ring buf full, hw queue will be stopped. While blkif interrupt consume
request and make free space in ring buf, hw queue will be started again.
But since start queue is protected by spin lock while stop not, that will
cause a race.
interrupt: process:
blkif_interrupt() blkif_queue_rq()
kick_pending_request_queues_locked()
blk_mq_start_stopped_hw_queues()
clear_bit(BLK_MQ_S_STOPPED, &hctx->state)
blk_mq_stop_hw_queue(hctx)
blk_mq_run_hw_queue(hctx, async)
If ring buf is made empty in this case, interrupt will never come, then the
hw queue will be stopped forever, all processes waiting for the pending io
in the queue will hung.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Ankur Arora <ankur.a.arora@oracle.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Use sysfs_match_string() helper instead of open coded variant.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
A user reported that he was getting immediate disconnects with my
sndtimeo patch applied. This is because by default the OSS nbd client
doesn't set a timeout, so we end up setting the sndtimeo to 0, which of
course means we have send errors a lot. Instead only set our sndtimeo
if the user specified a timeout, otherwise we'll just wait forever like
we did previously.
Fixes: dc88e34d69 ("nbd: set sk->sk_sndtimeo for our sockets")
Reported-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to take the tx_lock so we don't interleave our disconnect
request between real data going down the wire.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's no reason to limit ourselves to one disconnect message per
socket. Sometimes networks do strange things, might as well let
sysadmins hit the panic button as much as they want.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need to return value in queue work, kill ret variable.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull more block updates from Jens Axboe:
"This is a followup for block changes, that didn't make the initial
pull request. It's a bit of a mixed bag, this contains:
- A followup pull request from Sagi for NVMe. Outside of fixups for
NVMe, it also includes a series for ensuring that we properly
quiesce hardware queues when browsing live tags.
- Set of integrity fixes from Dmitry (mostly), fixing various issues
for folks using DIF/DIX.
- Fix for a bug introduced in cciss, with the req init changes. From
Christoph.
- Fix for a bug in BFQ, from Paolo.
- Two followup fixes for lightnvm/pblk from Javier.
- Depth fix from Ming for blk-mq-sched.
- Also from Ming, performance fix for mtip32xx that was introduced
with the dynamic initialization of commands"
* 'for-linus' of git://git.kernel.dk/linux-block: (44 commits)
block: call bio_uninit in bio_endio
nvmet: avoid unneeded assignment of submit_bio return value
nvme-pci: add module parameter for io queue depth
nvme-pci: compile warnings in nvme_alloc_host_mem()
nvmet_fc: Accept variable pad lengths on Create Association LS
nvme_fc/nvmet_fc: revise Create Association descriptor length
lightnvm: pblk: remove unnecessary checks
lightnvm: pblk: control I/O flow also on tear down
cciss: initialize struct scsi_req
null_blk: fix error flow for shared tags during module_init
block: Fix __blkdev_issue_zeroout loop
nvme-rdma: unconditionally recycle the request mr
nvme: split nvme_uninit_ctrl into stop and uninit
virtio_blk: quiesce/unquiesce live IO when entering PM states
mtip32xx: quiesce request queues to make sure no submissions are inflight
nbd: quiesce request queues to make sure no submissions are inflight
nvme: kick requeue list when requeueing a request instead of when starting the queues
nvme-pci: quiesce/unquiesce admin_q instead of start/stop its hw queues
nvme-loop: quiesce/unquiesce admin_q instead of start/stop its hw queues
nvme-fc: quiesce/unquiesce admin_q instead of start/stop its hw queues
...
The global variable 'rd_size' is declared as 'int' in source file
arch/arm/kernel/atags_parse.c and as 'unsigned long' in
drivers/block/brd.c. Fix this inconsistency.
Additionally, remove the declarations of rd_image_start, rd_prompt and
rd_doload from parse_tag_ramdisk() since these duplicate existing
declarations in <linux/initrd.h>.
Link: http://lkml.kernel.org/r/20170627065024.12347-1-bart.vanassche@wdc.com
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Zhaohongjiang <zhaohongjiang@huawei.com>
Cc: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with
const attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
8293 841 4 9138 23b2 drivers/block/zram/zram_drv.o
File size After adding 'const':
text data bss dec hex filename
8357 777 4 9138 23b2 drivers/block/zram/zram_drv.o
Link: http://lkml.kernel.org/r/65680c1c4d85818f7094cbfa31c91bf28185ba1b.1499061182.git.arvind.yadav.cs@gmail.com
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull followup NVMe (mostly) changes from Sagi:
I added the quiesce/unquiesce patches in here as it's
easy for me easily apply changes on top. It has accumulated
reviews and includes mostly nvme anyway, please tell me if
you don't want to take them with this.
This includes:
- quiesce/unquiesce fixes in nvme and others from me
- nvme-fc add create association padding spec updates from James
- some more quirking from MKP
- nvmet nit cleanup from Max
- Fix nvme-rdma racy RDMA completion signalling from Marta
- some centralization patches from me
- add tagset nr_hw_queues updates on controller resets in
nvme drivers from me
- nvme-rdma fix resources recycling when doing error recovery from me
- minor cleanups in nvme-fc from me
* Introduce the _flushcache() family of memory copy helpers and use them
for persistent memory write operations on x86. The _flushcache()
semantic indicates that the cache is either bypassed for the copy
operation (movnt) or any lines dirtied by the copy operation are
written back (clwb, clflushopt, or clflush).
* Extend dax_operations with ->copy_from_iter() and ->flush()
operations. These operations and other infrastructure updates allow
all persistent memory specific dax functionality to be pushed into
libnvdimm and the pmem driver directly. It also allows dax-specific
sysfs attributes to be linked to a host device, for example:
/sys/block/pmem0/dax/write_cache
* Add support for the new NVDIMM platform/firmware mechanisms introduced
in ACPI 6.2 and UEFI 2.7. This support includes the v1.2 namespace
label format, extensions to the address-range-scrub command set, new
error injection commands, and a new BTT (block-translation-table)
layout. These updates support inter-OS and pre-OS compatibility.
* Fix a longstanding memory corruption bug in nfit_test.
* Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
capable.
* Miscellaneous fixes and small updates across libnvdimm and the nfit
driver.
Acknowledgements that came after the branch was pushed:
commit 6aa734a2f3 "libnvdimm, region, pmem: fix 'badblocks'
sysfs_get_dirent() reference lifetime"
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
-----BEGIN PGP SIGNATURE-----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=xKQB
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"libnvdimm updates for the latest ACPI and UEFI specifications. This
pull request also includes new 'struct dax_operations' enabling to
undo the abuse of copy_user_nocache() for copy operations to pmem.
The dax work originally missed 4.12 to address concerns raised by Al.
Summary:
- Introduce the _flushcache() family of memory copy helpers and use
them for persistent memory write operations on x86. The
_flushcache() semantic indicates that the cache is either bypassed
for the copy operation (movnt) or any lines dirtied by the copy
operation are written back (clwb, clflushopt, or clflush).
- Extend dax_operations with ->copy_from_iter() and ->flush()
operations. These operations and other infrastructure updates allow
all persistent memory specific dax functionality to be pushed into
libnvdimm and the pmem driver directly. It also allows dax-specific
sysfs attributes to be linked to a host device, for example:
/sys/block/pmem0/dax/write_cache
- Add support for the new NVDIMM platform/firmware mechanisms
introduced in ACPI 6.2 and UEFI 2.7. This support includes the v1.2
namespace label format, extensions to the address-range-scrub
command set, new error injection commands, and a new BTT
(block-translation-table) layout. These updates support inter-OS
and pre-OS compatibility.
- Fix a longstanding memory corruption bug in nfit_test.
- Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
capable.
- Miscellaneous fixes and small updates across libnvdimm and the nfit
driver.
Acknowledgements that came after the branch was pushed: commit
6aa734a2f3 ("libnvdimm, region, pmem: fix 'badblocks'
sysfs_get_dirent() reference lifetime") was reviewed by Toshi Kani
<toshi.kani@hpe.com>"
* tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (42 commits)
libnvdimm, namespace: record 'lbasize' for pmem namespaces
acpi/nfit: Issue Start ARS to retrieve existing records
libnvdimm: New ACPI 6.2 DSM functions
acpi, nfit: Show bus_dsm_mask in sysfs
libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru.
acpi, nfit: Enable DSM pass thru for root functions.
libnvdimm: passthru functions clear to send
libnvdimm, btt: convert some info messages to warn/err
libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime
libnvdimm: fix the clear-error check in nsio_rw_bytes
libnvdimm, btt: fix btt_rw_page not returning errors
acpi, nfit: quiet invalid block-aperture-region warnings
libnvdimm, btt: BTT updates for UEFI 2.7 format
acpi, nfit: constify *_attribute_group
libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile region
libnvdimm, pmem, dax: export a cache control attribute
dax: convert to bitmask for flags
dax: remove default copy_from_iter fallback
libnvdimm, nfit: enable support for volatile ranges
libnvdimm, pmem: fix persistence warning
...
Merge misc updates from Andrew Morton:
- a few hotfixes
- various misc updates
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (108 commits)
mm, memory_hotplug: move movable_node to the hotplug proper
mm, memory_hotplug: drop CONFIG_MOVABLE_NODE
mm, memory_hotplug: drop artificial restriction on online/offline
mm: memcontrol: account slab stats per lruvec
mm: memcontrol: per-lruvec stats infrastructure
mm: memcontrol: use generic mod_memcg_page_state for kmem pages
mm: memcontrol: use the node-native slab memory counters
mm: vmstat: move slab statistics from zone to node counters
mm/zswap.c: delete an error message for a failed memory allocation in zswap_dstmem_prepare()
mm/zswap.c: improve a size determination in zswap_frontswap_init()
mm/zswap.c: delete an error message for a failed memory allocation in zswap_pool_create()
mm/swapfile.c: sort swap entries before free
mm/oom_kill: count global and memory cgroup oom kills
mm: per-cgroup memory reclaim stats
mm: kmemleak: treat vm_struct as alternative reference to vmalloc'ed objects
mm: kmemleak: factor object reference updating out of scan_block()
mm: kmemleak: slightly reduce the size of some structures on 64-bit architectures
mm, mempolicy: don't check cpuset seqlock where it doesn't matter
mm, cpuset: always use seqlock when changing task's nodemask
mm, mempolicy: simplify rebinding mempolicies when updating cpusets
...
Pull misc compat stuff updates from Al Viro:
"This part is basically untangling various compat stuff. Compat
syscalls moved to their native counterparts, getting rid of quite a
bit of double-copying and/or set_fs() uses. A lot of field-by-field
copyin/copyout killed off.
- kernel/compat.c is much closer to containing just the
copyin/copyout of compat structs. Not all compat syscalls are gone
from it yet, but it's getting there.
- ipc/compat_mq.c killed off completely.
- block/compat_ioctl.c cleaned up; floppy compat ioctls moved to
drivers/block/floppy.c where they belong. Yes, there are several
drivers that implement some of the same ioctls. Some are m68k and
one is 32bit-only pmac. drivers/block/floppy.c is the only one in
that bunch that can be built on biarch"
* 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
mqueue: move compat syscalls to native ones
usbdevfs: get rid of field-by-field copyin
compat_hdio_ioctl: get rid of set_fs()
take floppy compat ioctls to sodding floppy.c
ipmi: get rid of field-by-field __get_user()
ipmi: get COMPAT_IPMICTL_RECEIVE_MSG in sync with the native one
rt_sigtimedwait(): move compat to native
select: switch compat_{get,put}_fd_set() to compat_{get,put}_bitmap()
put_compat_rusage(): switch to copy_to_user()
sigpending(): move compat to native
getrlimit()/setrlimit(): move compat to native
times(2): move compat to native
compat_{get,put}_bitmap(): use unsafe_{get,put}_user()
fb_get_fscreeninfo(): don't bother with do_fb_ioctl()
do_sigaltstack(): lift copying to/from userland into callers
take compat_sys_old_getrlimit() to native syscall
trim __ARCH_WANT_SYS_OLD_GETRLIMIT
Regardless of whether it is same page or not, it's surely write and
stored to zram so we should increase pages_stored stat. Otherwise, user
can see zero value via mm_stats although he writes a lot of pages to
zram.
Link: http://lkml.kernel.org/r/1494834068-27004-1-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The changes in "block: Make most scsi_req_init() calls implicit" mean
that every driver that supports the generic scsi ioctls needs to
call scsi_req_init on newly allocated requests, but that commit didn't
add the call to the ccіss driver. Fix that to avoid crashes when
udev issues SG_IO commands.
Fixes: ca18d6f7 ("block: Make most scsi_req_init() calls implicit")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case we use shared tags feature, blk_mq_alloc_tag_set might fail
during module initialization. In that case, fail the load with a
suitable error code. Also move the tagset initialization process after
defining the amount of submission queues.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Without it its not guaranteed that no .queue_rq is inflight.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: virtio-dev@lists.oasis-open.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Unlike blk_mq_stop_hw_queues, blk_mq_quiesce_queue respects the
submission path rcu grace. quiesce the queue before iterating
on live tags, or performing device io quiescing.
While were at it, verify that the request started in mtip_abort_cmd
amd mtip_queue_cmd tag iteration calls.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Unlike blk_mq_stop_hw_queues, blk_mq_quiesce_queue respects the
submission path rcu grace. quiesce the queue before iterating
on live tags.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Pull read/write updates from Al Viro:
"Christoph's fs/read_write.c series - consolidation and cleanups"
* 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nfsd: remove nfsd_vfs_read
nfsd: use vfs_iter_read/write
fs: implement vfs_iter_write using do_iter_write
fs: implement vfs_iter_read using do_iter_read
fs: move more code into do_iter_read/do_iter_write
fs: remove __do_readv_writev
fs: remove do_compat_readv_writev
fs: remove do_readv_writev
Pull misc user access cleanups from Al Viro:
"The first pile is assorted getting rid of cargo-culted access_ok(),
cargo-culted set_fs() and field-by-field copyouts.
The same description applies to a lot of stuff in other branches -
this is just the stuff that didn't fit into a more specific topical
branch"
* 'work.misc-set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Switch flock copyin/copyout primitives to copy_{from,to}_user()
fs/fcntl: return -ESRCH in f_setown when pid/pgid can't be found
fs/fcntl: f_setown, avoid undefined behaviour
fs/fcntl: f_setown, allow returning error
lpfc debugfs: get rid of pointless access_ok()
adb: get rid of pointless access_ok()
isdn: get rid of pointless access_ok()
compat statfs: switch to copy_to_user()
fs/locks: don't mess with the address limit in compat_fcntl64
nfsd_readlink(): switch to vfs_get_link()
drbd: ->sendpage() never needed set_fs()
fs/locks: pass kernel struct flock to fcntl_getlk/setlk
fs: locks: Fix some troubles at kernel-doc comments
It is observed reading the register from HW takes a bit long,
for example in my box, the following difference of 'perf report
--no-children fio ...' can be seen when running I/O:
1) V4.12 without patch
+ 9.28% fio [mtip32xx] [k] mtip_irq_handler
+ 8.48% fio [mtip32xx] [k] mtip_init_cmd_header
2) V4.12 with the following patch
+ 9.14% fio [mtip32xx] [k] mtip_irq_handler
......
+ 1.14% fio [mtip32xx] [k] mtip_init_cmd_header
IOPS can be increased by ~5% with this patch too.
Fixes: a4e84aae8139(mtip32xx: use runtime tag to initialize command header)
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Here is the big driver core update for 4.13-rc1.
The large majority of this is a lot of cleanup of old fields in the
driver core structures and their remaining usages in random drivers.
All of those fixes have been reviewed by the various subsystem
maintainers. There's also some small firmware updates in here, a new
kobject uevent api interface that makes userspace interaction easier,
and a few other minor things.
All of these have been in linux-next for a long while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpX4A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymobgCfd0d13IfpZoq1N41wc6z2Z0xD7cwAnRMeH1/p
kEeISGpHPYP9f8PBh9FO
=Hfqt
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big driver core update for 4.13-rc1.
The large majority of this is a lot of cleanup of old fields in the
driver core structures and their remaining usages in random drivers.
All of those fixes have been reviewed by the various subsystem
maintainers. There's also some small firmware updates in here, a new
kobject uevent api interface that makes userspace interaction easier,
and a few other minor things.
All of these have been in linux-next for a long while with no reported
issues"
* tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (56 commits)
arm: mach-rpc: ecard: fix build error
zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()
driver-core: remove struct bus_type.dev_attrs
powerpc: vio_cmo: use dev_groups and not dev_attrs for bus_type
powerpc: vio: use dev_groups and not dev_attrs for bus_type
USB: usbip: convert to use DRIVER_ATTR_RW
s390: drivers: convert to use DRIVER_ATTR_RO/WO
platform: thinkpad_acpi: convert to use DRIVER_ATTR_RO/RW
pcmcia: ds: convert to use DRIVER_ATTR_RO
wireless: ipw2x00: convert to use DRIVER_ATTR_RW
net: ehea: convert to use DRIVER_ATTR_RO
net: caif: convert to use DRIVER_ATTR_RO
TTY: hvc: convert to use DRIVER_ATTR_RW
PCI: pci-driver: convert to use DRIVER_ATTR_WO
IB: nes: convert to use DRIVER_ATTR_RW
HID: hid-core: convert to use DRIVER_ATTR_RO and drv_groups
arm: ecard: fix dev_groups patch typo
tty: serdev: use dev_groups and not dev_attrs for bus_type
sparc: vio: use dev_groups and not dev_attrs for bus_type
hid: intel-ish-hid: use dev_groups and not dev_attrs for bus_type
...
De-dupliate some code and allow for passing the flags argument to
vfs_iter_write. Additionally it now properly updates timestamps.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
De-dupliate some code and allow for passing the flags argument to
vfs_iter_read. Additional it properly updates atime now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Drop static on a local variable, when the variable is initialized before
any use, on every possible execution path through the function. The
static has no benefit, and dropping it reduces the code size.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@bad exists@
position p;
identifier x;
type T;
@@
static T x@p;
...
x = <+...x...+>
@@
identifier x;
expression e;
type T;
position p != bad.p;
@@
-static
T x@p;
... when != x
when strict
?x = e;
// </smpl>
The change in code size is indicates by the following output from the size
command.
before:
text data bss dec hex filename
67299 2291 1056 70646 113f6 drivers/block/drbd/drbd_nl.o
after:
text data bss dec hex filename
67283 2291 1056 70630 113e6 drivers/block/drbd/drbd_nl.o
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Require all dax-drivers to register a ->copy_from_iter() operation so
that it is clear which dax_operations are optional and which must be
implemented for filesystem-dax to operate.
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Instead move it to the callers. Those that either don't use bio_data() or
page_address() or are specific to architectures that do not support highmem
are skipped.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lars Ellenberg