If the kernel isn't built with interconnect support, icc_get_name()
returns NULL and we get following warning:
drivers/opp/debugfs.c: In function 'bw_name_read':
drivers/opp/debugfs.c:43:42: error: '%.62s' directive argument is null [-Werror=format-overflow=]
i = scnprintf(buf, sizeof(buf), "%.62s\n", icc_get_name(path));
Fix it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402141313.81ltVF5g-lkp@intel.com/
Fixes: 0430b1d570 ("opp: Expose bandwidth information via debugfs")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
We currently get the following warning:
debugfs.c:105:54: error: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size 8 [-Werror=format-truncation=]
snprintf(name, sizeof(name), "supply-%d", i);
^~
debugfs.c:105:46: note: directive argument in the range [-2147483644, 2147483646]
snprintf(name, sizeof(name), "supply-%d", i);
^~~~~~~~~~~
debugfs.c:105:17: note: 'snprintf' output between 9 and 19 bytes into a destination of size 15
snprintf(name, sizeof(name), "supply-%d", i);
Fix this and other potential issues it by allocating larger arrays.
Use the exact string format to allocate the arrays without getting into
these issues again.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402141313.81ltVF5g-lkp@intel.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Let's extend the dev_pm_opp_data with a turbo variable, to allow users to
specify if it's a boost frequency for a dynamically added OPP.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP core finds the eventual frequency to set with the help of
clk_round_rate() and the same was earlier getting passed to _set_opp()
and that's what would get configured.
The commit 1efae8d2e7 ("OPP: Make dev_pm_opp_set_opp() independent of
frequency") mistakenly changed that. Fix it.
Fixes: 1efae8d2e7 ("OPP: Make dev_pm_opp_set_opp() independent of frequency")
Cc: v5.18+ <stable@vger.kernel.org> # v6.0+
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
By mistake, dev_pm_opp_find_level_floor() used the level parameter as
unsigned long instead of unsigned int. Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
_find_key_ceil() may return an error and that must be checked before
passing the same to dev_pm_opp_put().
Fixes: 41907aa4ae37 ("OPP: Level zero is valid")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Like other frameworks (clk, regulator, etc.) genpd core too takes care
of propagation to performance state to parent genpds. The OPP core
shouldn't attempt the same, or it may result in undefined behavior.
Add checks at various places to take care of the same.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Configuring the required OPP was never properly implemented, we just
took an exception for genpds and configured them directly, while leaving
out all other required OPP types.
Now that a standard call to dev_pm_opp_set_opp() takes care of
configuring the opp->level too, the special handling for genpds can be
avoided by simply calling dev_pm_opp_set_opp() for the required OPPs,
which shall eventually configure the corresponding level for genpds.
This also makes it possible for us to configure other type of required
OPPs (no concrete users yet though), via the same path. This is how
other frameworks take care of parent nodes, like clock, regulators, etc,
where we recursively call the same helper.
In order to call dev_pm_opp_set_opp() for the virtual genpd devices,
they must share the OPP table of the genpd. Call _add_opp_dev() for them
to get that done.
This commit also extends the struct dev_pm_opp_config to pass required
devices, for non-genpd cases, which can be used to call
dev_pm_opp_set_opp() for the non-genpd required devices.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There are two genpd (as required-opp) cases that we need to handle,
devices with a single genpd and ones with multiple genpds.
The multiple genpds case is clear, where the OPP core calls
dev_pm_domain_attach_by_name() for them and uses the virtual devices
returned by this helper to call dev_pm_domain_set_performance_state()
later to change the performance state.
The single genpd case however requires special handling as we need to
use the same `dev` structure (instead of a virtual one provided by genpd
core) for setting the performance state via
dev_pm_domain_set_performance_state().
As we move towards more generic code to take care of the required OPPs,
where we will recursively call dev_pm_opp_set_opp() for all the required
OPPs, the above special case becomes a problem.
It doesn't make sense for a device's DT entry to have both "opp-level"
and single "required-opps" entry pointing to a genpd's OPP, as that
would make the OPP core call dev_pm_domain_set_performance_state() for
two different values for the same device structure. And so we can reuse
the 'opp->level" field in such a case and call _set_opp_level() for the
device.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The level zero can be used by some OPPs to drop performance state vote
for the device. It is perfectly fine to allow the same.
_set_opp_level() considers it as an invalid value currently and returns
early.
In order to support this properly, initialize the level field with
U32_MAX, which denotes unused level field.
Reported-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
As this driver only does DT based matching, of_match_device() will never
return NULL if we've gotten to probe(). Therefore, the NULL check and
error return for it can be dropped.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When the new interface for attaching genpd's via the OPP core was added,
it was possible for required_opp_count to be zero, but not anymore.
Remove the unused check.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
All the config operations for OPP tables share common code paths now and
none of the other ones have such protection in place. Either all should
have it or none.
The understanding here is that user won't clear the OPP configs while
still using them and so such a case won't happen. We can always come
back and use a wider lock for all resource types if required.
Also fix the error on failing to allocate memory.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Clang warns (or errors with CONFIG_WERROR=y):
drivers/opp/of.c:1081:28: error: multiple unsequenced modifications to 'val' [-Werror,-Wunsequenced]
1081 | .freq = be32_to_cpup(val++) * 1000,
| ^
1082 | .u_volt = be32_to_cpup(val++),
| ~~
1 error generated.
There is no sequence point in a designated initializer. Move back to
separate variables for the creation of the values, so that there are
sequence points between each evaluation and increment of val.
Fixes: 75bbc92c09d8 ("OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
We currently get the following warning:
debugfs.c: In function ‘opp_debug_create_one’:
debugfs.c:63:42: warning: ‘%.1d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 2 [-Wformat-truncation=]
snprintf(name, sizeof(name), "icc-path-%.1d", i);
^~~~
debugfs.c:63:32: note: directive argument in the range [0, 2147483647]
snprintf(name, sizeof(name), "icc-path-%.1d", i);
^~~~~~~~~~~~~~~
debugfs.c:63:3: note: ‘snprintf’ output between 11 and 20 bytes into a destination of size 11
snprintf(name, sizeof(name), "icc-path-%.1d", i);
Fix it by increasing size of the `name` array.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
These were previously exposed outside of the OPP core and needed doc
style commenting. They aren't public now and don't need the same.
This fixes warnings generated for builds with `W=1`:
core.c:2105: warning: Function parameter or member 'opp_table' not described in '_opp_set_supported_hw'
core.c:2105: warning: Excess function parameter 'dev' description in '_opp_set_supported_hw'
core.c:2148: warning: Function parameter or member 'opp_table' not described in '_opp_set_prop_name'
core.c:2148: warning: Excess function parameter 'dev' description in '_opp_set_prop_name'
core.c:2189: warning: Function parameter or member 'opp_table' not described in '_opp_set_regulators'
core.c:2189: warning: Excess function parameter 'count' description in '_opp_set_regulators'
core.c:2293: warning: Function parameter or member 'opp_table' not described in '_opp_set_clknames'
core.c:2293: warning: Function parameter or member 'config_clks' not described in '_opp_set_clknames'
core.c:2391: warning: Function parameter or member 'opp_table' not described in '_opp_set_config_regulators_helper'
core.c:2455: warning: Function parameter or member 'opp_table' not described in '_opp_attach_genpd'
core.c:2682: warning: Function parameter or member 'token' not described in 'dev_pm_opp_clear_config'
core.c:2682: warning: Excess function parameter 'opp_table' description in 'dev_pm_opp_clear_config'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309091558.x3JJrxFI-lkp@intel.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add dev_pm_opp_find_level_floor(), as is done for frequency and
bandwidth.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
[ Viresh: Updated commit log and rearranged code ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
At this point the level (performance state) for an OPP is currently limited
to be requested for a device that is attached to a PM domain. Moreover,
the device needs to have the so called required-opps assigned to it, which
are based upon OPP tables being described in DT.
To extend the support beyond required-opps and DT, let's enable the level
to be set for all OPPs. More precisely, if the requested OPP has a valid
level let's try to request it through the device's optional PM domain, via
calling dev_pm_domain_set_performance_state().
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ Viresh: Handle NULL opp in _set_opp_level() ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
To support performance scaling for any kinds of PM domains, let's move away
from using the genpd specific API, dev_pm_genpd_set_performance_state(), to
the common dev_pm_domain_set_performance_state().
No intended functional impact at this point.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Let's extend the dev_pm_opp_data with a level variable, to allow users to
specify a corresponding level (performance state) for a dynamically added
OPP.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The dev_pm_opp_add() API is limited to add dynamic OPPs with a frequency
and a voltage level. To enable more flexibility, let's add a new API,
dev_pm_opp_add_dynamic() that's takes a struct dev_pm_opp_data* instead of
a list of in-parameters.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
If dev_pm_domain_attach_by_name() returns NULL, then 0 will be passed to
PTR_ERR() as reported by the smatch warning below:
drivers/opp/core.c:2456 _opp_attach_genpd() warn: passing zero to 'PTR_ERR'
Fix it by checking for the non-NULL virt_dev pointer before passing it to
PTR_ERR. Otherwise return -ENODEV.
Fixes: 4ea9496cbc ("opp: Fix error check in dev_pm_opp_attach_genpd()")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
"opp" pointer is dereferenced before the IS_ERR_OR_NULL() check. Fix it by
removing the dereference to cache opp_table and dereference it directly
where opp_table is used.
This fixes the following smatch warning:
drivers/opp/core.c:232 dev_pm_opp_get_required_pstate() warn: variable
dereferenced before IS_ERR check 'opp' (see line 230)
Fixes: 84cb7ff35f ("OPP: pstate is only valid for genpd OPP tables")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Now that we support finding indexed frequencies, lets update
_read_freq() to return the right one.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The indexed version of the API is added for other floor and ceil, add
the same for exact as well for completeness.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In the case of devices with multiple clocks, drivers need to specify the
frequency index for the OPP framework to get the specific frequency within
the required OPP. So let's introduce the dev_pm_opp_get_freq_indexed() API
accepting the frequency index as an argument.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[ Viresh: Fixed potential access to NULL opp pointer ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In the case of devices with multiple clocks, drivers need to specify the
clock index for the OPP framework to find the OPP corresponding to the
floor/ceil of the supplied frequency. So let's introduce the two new APIs
accepting the clock index as an argument.
These APIs use the exising _find_key_ceil() helper by supplying the clock
index to it.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[ Viresh: Rearranged definitions in pm_opp.h ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
fa155f4f83 ("OPP: Use dev_err_probe() when failing to get icc_path")
failed to actually use the error it was trying to log:
smatch warnings:
drivers/opp/of.c:516 dev_pm_opp_of_find_icc_paths() warn: passing zero to 'dev_err_probe'
Make sure to use the right error and pass it along.
Fixes: fa155f4f83 ("OPP: Use dev_err_probe() when failing to get icc_path")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202306262008.guNLgjt6-lkp@intel.com/
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This, in tandem with dynamic debug, can print useful information about
-EPROBE_DEFFER like below, and keeps similar behavior for other errors:
[ 16.561072] cpu cpu0: error -EPROBE_DEFER: dev_pm_opp_of_find_icc_paths: Unable to get path0
[ 16.575777] platform 18591000.cpufreq: deferred probe pending
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
While adding support for "performance states" in the OPP and genpd core,
it was decided to set the `pstate` field via genpd's
pm_genpd_opp_to_performance_state() helper, to allow platforms to set
`pstate` even if they don't have a corresponding `level` field in the DT
OPP tables (More details are present in commit 6e41766a6a ("PM /
Domain: Implement of_genpd_opp_to_performance_state()")).
Revisiting that five years later clearly suggests that it was
over-designed as all current users are eventually using the `level`
value only.
The previous commit already added necessary checks to make sure pstate
is only used for genpd tables. Lets now simplify this a little, and use
`level` directly and remove `pstate` field altogether.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
It is not very clear right now that the `pstate` field is only valid for
genpd OPP tables and not consumer tables. And there is no checking for
the same at various places.
Add checks in place to verify that and make it clear to the reader.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Bjorn Andersson <quic_bjorande@quicinc.com>
This code was added (long back) by commit 009acd196f ("PM / OPP:
Support updating performance state of device's power domain") and at
that time the `opp->pstate` field was used to store the performance
state required by a device's OPP.
Over time that changed and the `->pstate` field is now used only for
genpd devices and consumer devices access that via the required-opps
instead.
Because of all these changes, _opp_table_kref_release() now drops the
constraint only when the genpd's OPP table gets freed and not the
device's. Which is definitely not what we wanted. And dropping the
constraint doesn't have much meaning as the genpd itself is going away.
Moreover, if we want to drop constraints here, then just dropping the
performance constraint alone isn't sufficient as there are other
resource constraints like clk, regulator, etc. too, which must be
handled.
Probably the right thing to do here is to leave this decision to the
consumers, which can call `dev_pm_opp_set_rate(dev, 0)` or similar APIs
to drop all constraints properly. Which many of the consumers already
do.
Remove the special code, which is broken anyway.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
The `opp_table_lock` lock is already used to protect the list elsewhere,
use it while adding or removing entries from it.
Reported-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
When dev_pm_opp_of_find_icc_paths() in _allocate_opp_table() returns
-EPROBE_DEFER, the opp_table is freed again, to wait until all the
interconnect paths are available.
However, if the OPP table is using required-opps then it may already
have been added to the global lazy_opp_tables list. The error path
does not remove the opp_table from the list again.
This can cause crashes later when the provider of the required-opps
is added, since we will iterate over OPP tables that have already been
freed. E.g.:
Unable to handle kernel NULL pointer dereference when read
CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.4.0-rc3
PC is at _of_add_opp_table_v2 (include/linux/of.h:949
drivers/opp/of.c:98 drivers/opp/of.c:344 drivers/opp/of.c:404
drivers/opp/of.c:1032) -> lazy_link_required_opp_table()
Fix this by calling _of_clear_opp_table() to remove the opp_table from
the list and clear other allocated resources. While at it, also add the
missing mutex_destroy() calls in the error path.
Cc: stable@vger.kernel.org
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Fixes: 7eba0c7641 ("opp: Allow lazy-linking of required-opps")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Otherwise, when enabling a debug build and dynamic debug in the kernel, it
quickly floods the kernel ring buffer and makes debugging of other
subsystems almost impossible, unless manually disabled.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to stop
including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to convert
more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones
that didn't get picked up elsewhere.
-----BEGIN PGP SIGNATURE-----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=89Zj
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
Now that of_cpu_device_node_get() is defined in of.h, of_device.h is just
implicitly including other includes, and is no longer needed. Adjust the
include files with what was implicitly included by of_device.h (cpu.h and
of.h) and drop including of_device.h.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-18-581e2605fe47@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The required-opps configuration is closely tied to genpd and performance
states at the moment and it is not very obvious that required-opps can
live without genpds. Though we don't support configuring required-opps
for non-genpd cases currently.
This commit aims at separating these parts, where configuring genpds
would be a special case of configuring the required-opps.
Add a specialized callback, set_required_opps(), to the opp table and
set it to different callbacks accordingly.
This shouldn't result in any functional changes for now.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
There is no real need of keeping separate code for single genpd case, it
can be made to work with a simple change.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Viresh Kumar