Commit Graph

60 Commits

Author SHA1 Message Date
Lorenzo Bianconi c09551c6ff net: ipv4: use a dedicated counter for icmp_v4 redirect packets
According to the algorithm described in the comment block at the
beginning of ip_rt_send_redirect, the host should try to send
'ip_rt_redirect_number' ICMP redirect packets with an exponential
backoff and then stop sending them at all assuming that the destination
ignores redirects.
If the device has previously sent some ICMP error packets that are
rate-limited (e.g TTL expired) and continues to receive traffic,
the redirect packets will never be transmitted. This happens since
peer->rate_tokens will be typically greater than 'ip_rt_redirect_number'
and so it will never be reset even if the redirect silence timeout
(ip_rt_redirect_silence) has elapsed without receiving any packet
requiring redirects.

Fix it by using a dedicated counter for the number of ICMP redirect
packets that has been sent by the host

I have not been able to identify a given commit that introduced the
issue since ip_rt_send_redirect implements the same rate-limiting
algorithm from commit 1da177e4c3 ("Linux-2.6.12-rc2")

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08 21:50:15 -08:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Eric Dumazet b145425f26 inetpeer: remove AVL implementation in favor of RB tree
As discussed in Faro during Netfilter Workshop 2017, RB trees can be
used with RCU, using a seqlock.

Note that net/rxrpc/conn_service.c is already using this.

This patch converts inetpeer from AVL tree to RB tree, since it allows
to remove private AVL implementation in favor of shared RB code.

$ size net/ipv4/inetpeer.before net/ipv4/inetpeer.after
   text    data     bss     dec     hex filename
   3195      40     128    3363     d23 net/ipv4/inetpeer.before
   1562      24       0    1586     632 net/ipv4/inetpeer.after

The same technique can be used to speed up
net/netfilter/nft_set_rbtree.c (removing rwlock contention in fast path)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17 08:59:01 -07:00
Reshetova, Elena 1cc9a98b59 net: convert inet_peer.refcnt from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
This conversion requires overall +1 on the whole
refcounting scheme.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 07:39:07 -07:00
Eric Dumazet 887dc9f2ce inet: tcp: fix inetpeer_set_addr_v4()
David Ahern added a vif field in the a4 part of inetpeer_addr struct.

This broke IPv4 TCP fast open client side and more generally tcp metrics
cache, because inetpeer_addr_cmp() is now comparing two u32 instead of
one.

inetpeer_set_addr_v4() needs to properly init vif field, otherwise
the comparison result depends on uninitialized data.

Fixes: 192132b9a0 ("net: Add support for VRFs to inetpeer cache")
Reported-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16 00:14:12 -05:00
David Ahern 192132b9a0 net: Add support for VRFs to inetpeer cache
inetpeer caches based on address only, so duplicate IP addresses within
a namespace return the same cached entry. Enhance the ipv4 address key
to contain both the IPv4 address and VRF device index.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 13:32:36 -07:00
David Ahern 5345c2e12d net: Refactor inetpeer address struct
Move the inetpeer_addr_base union to inetpeer_addr and drop
inetpeer_addr_base.

Both the a6 and in6_addr overlays are not needed; drop the __be32 version
and rename in6 to a6 for consistency with ipv4. Add a new u32 array to
the union which removes the need for the typecast in the compare function
and the use of a consistent arg for both ipv4 and ipv6 addresses which
makes the compare function more readable.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 13:32:36 -07:00
David Ahern d39d14ffa2 net: Add helper function to compare inetpeer addresses
tcp_metrics and inetpeer both have functions to compare inetpeer
addresses. Consolidate into 1 version.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 13:32:36 -07:00
David Ahern 3abef286cf net: Add set,get helpers for inetpeer addresses
Use inetpeer set,get helpers in tcp_metrics rather than peeking into
the inetpeer_addr struct.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 13:32:36 -07:00
David Ahern 2c0027cd54 inetpeer: remove dead code
Remove various inlined functions not referenced in the kernel.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25 13:45:52 -07:00
Jiri Benc 8f55db4860 tcp: simplify inetpeer_addr_base use
In many places, the a6 field is typecasted to struct in6_addr. As the
fields are in union anyway, just add in6_addr type to the union and get rid
of the typecasting.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31 13:58:35 -04:00
Willem de Bruijn a7f26b7e1e inet: remove dead inetpeer sequence code
inetpeer sequence numbers are no longer incremented, so no need to
check and flush the tree. The function that increments the sequence
number was already dead code and removed in in "ipv4: remove unused
function" (068a6e18). Remove the code that checks for a change, too.

Verifying that v4_seq and v6_seq are never incremented and thus that
flush_check compares bp->flush_seq to 0 is trivial.

The second part of the change removes flush_check completely even
though bp->flush_seq is exactly !0 once, at initialization. This
change is correct because the time this branch is true is when
bp->root == peer_avl_empty_rcu, in which the branch and
inetpeer_invalidate_tree are a NOOP.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-08 16:42:42 -07:00
David S. Miller c99f7abf0e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	include/net/inetpeer.h
	net/ipv6/output_core.c

Changes in net were fixing bugs in code removed in net-next.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03 23:32:12 -07:00
Eric Dumazet 39c36094d7 net: fix inet_getid() and ipv6_select_ident() bugs
I noticed we were sending wrong IPv4 ID in TCP flows when MTU discovery
is disabled.
Note how GSO/TSO packets do not have monotonically incrementing ID.

06:37:41.575531 IP (id 14227, proto: TCP (6), length: 4396)
06:37:41.575534 IP (id 14272, proto: TCP (6), length: 65212)
06:37:41.575544 IP (id 14312, proto: TCP (6), length: 57972)
06:37:41.575678 IP (id 14317, proto: TCP (6), length: 7292)
06:37:41.575683 IP (id 14361, proto: TCP (6), length: 63764)

It appears I introduced this bug in linux-3.1.

inet_getid() must return the old value of peer->ip_id_count,
not the new one.

Lets revert this part, and remove the prevention of
a null identification field in IPv6 Fragment Extension Header,
which is dubious and not even done properly.

Fixes: 87c48fa3b4 ("ipv6: make fragment identifications less predictable")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02 14:09:28 -07:00
Eric Dumazet 73f156a6e8 inetpeer: get rid of ip_id_count
Ideally, we would need to generate IP ID using a per destination IP
generator.

linux kernels used inet_peer cache for this purpose, but this had a huge
cost on servers disabling MTU discovery.

1) each inet_peer struct consumes 192 bytes

2) inetpeer cache uses a binary tree of inet_peer structs,
   with a nominal size of ~66000 elements under load.

3) lookups in this tree are hitting a lot of cache lines, as tree depth
   is about 20.

4) If server deals with many tcp flows, we have a high probability of
   not finding the inet_peer, allocating a fresh one, inserting it in
   the tree with same initial ip_id_count, (cf secure_ip_id())

5) We garbage collect inet_peer aggressively.

IP ID generation do not have to be 'perfect'

Goal is trying to avoid duplicates in a short period of time,
so that reassembly units have a chance to complete reassembly of
fragments belonging to one message before receiving other fragments
with a recycled ID.

We simply use an array of generators, and a Jenkin hash using the dst IP
as a key.

ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it
belongs (it is only used from this file)

secure_ip_id() and secure_ipv6_id() no longer are needed.

Rename ip_select_ident_more() to ip_select_ident_segs() to avoid
unnecessary decrement/increment of the number of segments.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02 11:00:41 -07:00
Stephen Hemminger 068a6e1834 ipv4: remove unused function
inetpeer_invalidate_family defined but never used

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-28 17:03:20 -05:00
Joe Perches 1fd5115538 inet*.h: Remove extern from function prototypes
There are a mix of function prototypes with and without extern
in the kernel sources.  Standardize on not using extern for
function prototypes.

Function prototypes don't need to be written with extern.
extern is assumed by the compiler.  Its use is as unnecessary as
using auto to declare automatic/local variables in a block.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21 14:01:38 -04:00
David S. Miller 5943634fc5 ipv4: Maintain redirect and PMTU info in struct rtable again.
Maintaining this in the inetpeer entries was not the right way to do
this at all.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:40:14 -07:00
David S. Miller 81166dd6fa tcp: Move timestamps from inetpeer to metrics cache.
With help from Lin Ming.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:40:08 -07:00
David S. Miller 7b34ca2ac7 inet: Avoid potential NULL peer dereference.
We handle NULL in rt{,6}_set_peer but then our caller will try to pass
that NULL pointer into inet_putpeer() which isn't ready for it.

Fix this by moving the NULL check one level up, and then remove the
now unnecessary NULL check from inetpeer_ptr_set_peer().

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11 04:13:57 -07:00
David S. Miller b48c80ece9 inet: Add family scope inetpeer flushes.
This implementation can deal with having many inetpeer roots, which is
a necessary prerequisite for per-FIB table rooted peer tables.

Each family (AF_INET, AF_INET6) has a sequence number which we bump
when we get a family invalidation request.

Each peer lookup cheaply checks whether the flush sequence of the
root we are using is out of date, and if so flushes it and updates
the sequence number.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11 02:09:10 -07:00
David S. Miller 97bab73f98 inet: Hide route peer accesses behind helpers.
We encode the pointer(s) into an unsigned long with one state bit.

The state bit is used so we can store the inetpeer tree root to use
when resolving the peer later.

Later the peer roots will be per-FIB table, and this change works to
facilitate that.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11 02:08:47 -07:00
David S. Miller c0efc887dc inet: Pass inetpeer root into inet_getpeer*() interfaces.
Otherwise we reference potentially non-existing members when
ipv6 is disabled.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-09 19:12:36 -07:00
David S. Miller 56a6b248eb inet: Consolidate inetpeer_invalidate_tree() interfaces.
We only need one interface for this operation, since we always know
which inetpeer root we want to flush.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-09 16:32:41 -07:00
David S. Miller c3426b4719 inet: Initialize per-netns inetpeer roots in net/ipv{4,6}/route.c
Instead of net/ipv4/inetpeer.c

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-09 16:27:05 -07:00
Gao feng 54db0cc2ba inetpeer: add parameter net for inet_getpeer_v4,v6
add struct net as a parameter of inet_getpeer_v[4,6],
use net to replace &init_net.

and modify some places to provide net for inet_getpeer_v[4,6]

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-08 14:27:23 -07:00
Gao feng c8a627ed06 inetpeer: add namespace support for inetpeer
now inetpeer doesn't support namespace,the information will
be leaking across namespace.

this patch move the global vars v4_peers and v6_peers to
netns_ipv4 and netns_ipv6 as a field peers.

add struct pernet_operations inetpeer_ops to initial pernet
inetpeer data.

and change family_to_base and inet_getpeer to support namespace.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-08 14:27:23 -07:00
Eric Dumazet 55432d2b54 inetpeer: fix a race in inetpeer_gc_worker()
commit 5faa5df1fa (inetpeer: Invalidate the inetpeer tree along with
the routing cache) added a race :

Before freeing an inetpeer, we must respect a RCU grace period, and make
sure no user will attempt to increase refcnt.

inetpeer_invalidate_tree() waits for a RCU grace period before inserting
inetpeer tree into gc_list and waking the worker. At that time, no
concurrent lookup can find a inetpeer in this tree.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-06 10:45:15 -07:00
Steffen Klassert ac3f48de09 route: Remove redirect_genid
As we invalidate the inetpeer tree along with the routing cache now,
we don't need a genid to reset the redirect handling when the routing
cache is flushed.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08 00:30:32 -08:00
Steffen Klassert 5faa5df1fa inetpeer: Invalidate the inetpeer tree along with the routing cache
We initialize the routing metrics with the values cached on the
inetpeer in rt_init_metrics(). So if we have the metrics cached on the
inetpeer, we ignore the user configured fib_metrics.

To fix this issue, we replace the old tree with a fresh initialized
inet_peer_base. The old tree is removed later with a delayed work queue.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08 00:30:24 -08:00
David S. Miller b3613118eb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2011-12-02 13:49:21 -05:00
Eric Dumazet de68dca181 inet: add a redirect generation id in inetpeer
Now inetpeer is the place where we cache redirect information for ipv4
destinations, we must be able to invalidate informations when a route is
added/removed on host.

As inetpeer is not yet namespace aware, this patch adds a shared
redirect_genid, and a per inetpeer redirect_genid. This might be changed
later if inetpeer becomes ns aware.

Cache information for one inerpeer is valid as long as its
redirect_genid has the same value than global redirect_genid.

Reported-by: Arkadiusz Miśkiewicz <a.miskiewicz@gmail.com>
Tested-by: Arkadiusz Miśkiewicz <a.miskiewicz@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26 19:16:37 -05:00
Alexey Dobriyan 4e3fd7a06d net: remove ipv6_addr_copy()
C assignment can handle struct in6_addr copying.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22 16:43:32 -05:00
Arun Sharma 60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Eric Dumazet 87c48fa3b4 ipv6: make fragment identifications less predictable
IPv6 fragment identification generation is way beyond what we use for
IPv4 : It uses a single generator. Its not scalable and allows DOS
attacks.

Now inetpeer is IPv6 aware, we can use it to provide a more secure and
scalable frag ident generator (per destination, instead of system wide)

This patch :
1) defines a new secure_ipv6_id() helper
2) extends inet_getid() to provide 32bit results
3) extends ipv6_select_ident() with a new dest parameter

Reported-by: Fernando Gont <fernando@gont.com.ar>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21 21:25:58 -07:00
Eric Dumazet 2b77bdde97 inetpeer: lower false sharing effect
Profiles show false sharing in addr_compare() because refcnt/dtime
changes dirty the first inet_peer cache line, where are lying the keys
used at lookup time. If many cpus are calling inet_getpeer() and
inet_putpeer(), or need frag ids, addr_compare() is in 2nd position in
"perf top".

Before patch, my udpflood bench (16 threads) on my 2x4x2 machine :

             5784.00  9.7% csum_partial_copy_generic [kernel]
             3356.00  5.6% addr_compare              [kernel]
             2638.00  4.4% fib_table_lookup          [kernel]
             2625.00  4.4% ip_fragment               [kernel]
             1934.00  3.2% neigh_lookup              [kernel]
             1617.00  2.7% udp_sendmsg               [kernel]
             1608.00  2.7% __ip_route_output_key     [kernel]
             1480.00  2.5% __ip_append_data          [kernel]
             1396.00  2.3% kfree                     [kernel]
             1195.00  2.0% kmem_cache_free           [kernel]
             1157.00  1.9% inet_getpeer              [kernel]
             1121.00  1.9% neigh_resolve_output      [kernel]
             1012.00  1.7% dev_queue_xmit            [kernel]
# time ./udpflood.sh

real	0m44.511s
user	0m20.020s
sys	11m22.780s

# time ./udpflood.sh

real	0m44.099s
user	0m20.140s
sys	11m15.870s

After patch, no more addr_compare() in profiles :

             4171.00 10.7% csum_partial_copy_generic   [kernel]
             1787.00  4.6% fib_table_lookup            [kernel]
             1756.00  4.5% ip_fragment                 [kernel]
             1234.00  3.2% udp_sendmsg                 [kernel]
             1191.00  3.0% neigh_lookup                [kernel]
             1118.00  2.9% __ip_append_data            [kernel]
             1022.00  2.6% kfree                       [kernel]
              993.00  2.5% __ip_route_output_key       [kernel]
              841.00  2.2% neigh_resolve_output        [kernel]
              816.00  2.1% kmem_cache_free             [kernel]
              658.00  1.7% ia32_sysenter_target        [kernel]
              632.00  1.6% kmem_cache_alloc_node       [kernel]

# time ./udpflood.sh

real	0m41.587s
user	0m19.190s
sys	10m36.370s

# time ./udpflood.sh

real	0m41.486s
user	0m19.290s
sys	10m33.650s

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 23:31:27 -07:00
Eric Dumazet 4b9d9be839 inetpeer: remove unused list
Andi Kleen and Tim Chen reported huge contention on inetpeer
unused_peers.lock, on memcached workload on a 40 core machine, with
disabled route cache.

It appears we constantly flip peers refcnt between 0 and 1 values, and
we must insert/remove peers from unused_peers.list, holding a contended
spinlock.

Remove this list completely and perform a garbage collection on-the-fly,
at lookup time, using the expired nodes we met during the tree
traversal.

This removes a lot of code, makes locking more standard, and obsoletes
two sysctls (inet_peer_gc_mintime and inet_peer_gc_maxtime). This also
removes two pointers in inet_peer structure.

There is still a false sharing effect because refcnt is in first cache
line of object [were the links and keys used by lookups are located], we
might move it at the end of inet_peer structure to let this first cache
line mostly read by cpus.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Andi Kleen <andi@firstfloor.org>
CC: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 17:05:30 -07:00
Eric Dumazet b71d1d426d inet: constify ip headers and in6_addr
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers
where possible, to make code intention more obvious.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 11:04:14 -07:00
David S. Miller ddd4aa424b inetpeer: Add redirect and PMTU discovery cached info.
Validity of the cached PMTU information is indicated by it's
expiration value being non-zero, just as per dst->expires.

The scheme we will use is that we will remember the pre-ICMP value
held in the metrics or route entry, and then at expiration time
we will restore that value.

In this way PMTU expiration does not kill off the cached route as is
done currently.

Redirect information is permanent, or at least until another redirect
is received.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-10 13:29:30 -08:00
David S. Miller 7a71ed899e inetpeer: Abstract address representation further.
Future changes will add caching information, and some of
these new elements will be addresses.

Since the family is implicit via the ->daddr.family member,
replicating the family in ever address we store is entirely
redundant.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-10 13:22:28 -08:00
David S. Miller 92d8682926 inetpeer: Move ICMP rate limiting state into inet_peer entries.
Like metrics, the ICMP rate limiting bits are cached state about
a destination.  So move it into the inet_peer entries.

If an inet_peer cannot be bound (the reason is memory allocation
failure or similar), the policy is to allow.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-04 15:59:53 -08:00
David S. Miller 144001bddc inetpeer: Mark metrics as "new" in fresh inetpeer entries.
Set the RTAX_LOCKED metric to INETPEER_METRICS_NEW (basically,
all ones) on fresh inetpeer entries.

This way code can determine if default metrics have been loaded
in from a routing table entry already.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27 13:52:16 -08:00
David S. Miller 606598237c inetpeer: Add metrics storage to inetpeer entries.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27 13:48:26 -08:00
David S. Miller 4399ce402c inetpeer: Fix incorrect comment about inetpeer struct size.
Now with ipv6 support it is no longer less than 64 bytes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-01 17:29:08 -08:00
David S. Miller 8790ca172a inetpeer: Kill use of inet_peer_address_t typedef.
They are verboten these days.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-01 17:28:18 -08:00
David S. Miller 672f007d65 inetpeer: Add inet_getpeer_v6()
Now that all of the infrastructure is in place, we can add
the ipv6 shorthand for peer creation.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-30 12:20:00 -08:00
David S. Miller b534ecf1cd inetpeer: Make inet_getpeer() take an inet_peer_adress_t pointer.
And make an inet_getpeer_v4() helper, update callers.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-30 11:54:19 -08:00
David S. Miller 582a72da9a inetpeer: Introduce inet_peer_address_t.
Currently only the v4 aspect is used, but this will change.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-30 11:53:55 -08:00
Eric Dumazet b914c4ea92 inetpeer: __rcu annotations
Adds __rcu annotations to inetpeer
	(struct inet_peer)->avl_left
	(struct inet_peer)->avl_right

This is a tedious cleanup, but removes one smp_wmb() from link_to_pool()
since we now use more self documenting rcu_assign_pointer().

Note the use of RCU_INIT_POINTER() instead of rcu_assign_pointer() in
all cases we dont need a memory barrier.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27 11:37:33 -07:00
Eric Dumazet 317fe0e6c5 inetpeer: restore small inet_peer structures
Addition of rcu_head to struct inet_peer added 16bytes on 64bit arches.

Thats a bit unfortunate, since old size was exactly 64 bytes.

This can be solved, using an union between this rcu_head an four fields,
that are normally used only when a refcount is taken on inet_peer.
rcu_head is used only when refcnt=-1, right before structure freeing.

Add a inet_peer_refcheck() function to check this assertion for a while.

We can bring back SLAB_HWCACHE_ALIGN qualifier in kmem cache creation.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16 11:55:39 -07:00