[ Upstream commit 3bc5729227 ]
slot_store() uses kstrtouint() to get a slot number, but stores the
result in an "int" variable (by casting a pointer).
This can result in a negative slot number if the unsigned int value is
very large.
A negative number means that the slot is empty, but setting a negative
slot number this way will not remove the device from the array. I don't
think this is a serious problem, but it could cause confusion and it is
best to fix it.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1d1f25bfda upstream.
Don't update recovery_cp when curr_resync is MD_RESYNC_ACTIVE, otherwise
md may skip the resync of the first 3 sectors if the resync procedure is
interrupted before the first calling of ->sync_request() as shown below:
md_do_sync thread control thread
// setup resync
mddev->recovery_cp = 0
j = 0
mddev->curr_resync = MD_RESYNC_ACTIVE
// e.g., set array as idle
set_bit(MD_RECOVERY_INTR, &&mddev_recovery)
// resync loop
// check INTR before calling sync_request
!test_bit(MD_RECOVERY_INTR, &mddev->recovery
// resync interrupted
// update recovery_cp from 0 to 3
// the resync of three 3 sectors will be skipped
mddev->recovery_cp = 3
Fixes: eac58d08d4 ("md: Use enum for overloaded magic numbers used by mddev->curr_resync")
Cc: stable@vger.kernel.org # 6.0+
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 613b14884b upstream.
This can't happen right now, but in preparation for allowing
bio_split_to_limits() returning NULL if it ended the bio, check for it
in all the callers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=R05e
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- handle number of queue changes in the TCP and RDMA drivers
(Daniel Wagner)
- allow changing the number of queues in nvmet (Daniel Wagner)
- also consider host_iface when checking ip options (Daniel
Wagner)
- don't map pages which can't come from HIGHMEM (Fabio M. De
Francesco)
- avoid unnecessary flush bios in nvmet (Guixin Liu)
- shrink and better pack the nvme_iod structure (Keith Busch)
- add comment for unaligned "fake" nqn (Linjun Bao)
- print actual source IP address through sysfs "address" attr
(Martin Belanger)
- various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
- handle effects after freeing the request (Keith Busch)
- copy firmware_rev on each init (Keith Busch)
- restrict management ioctls to admin (Keith Busch)
- ensure subsystem reset is single threaded (Keith Busch)
- report the actual number of tagset maps in nvme-pci (Keith
Busch)
- small fabrics authentication fixups (Christoph Hellwig)
- add common code for tagset allocation and freeing (Christoph
Hellwig)
- stop using the request_queue in nvmet (Christoph Hellwig)
- set min_align_mask before calculating max_hw_sectors (Rishabh
Bhatnagar)
- send a rediscover uevent when a persistent discovery controller
reconnects (Sagi Grimberg)
- misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)
- MD pull request via Song:
- Various raid5 fix and clean up, by Logan Gunthorpe and David
Sloan.
- Raid10 performance optimization, by Yu Kuai.
- sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)
- IO scheduler switching quisce fix (Keith)
- s390/dasd block driver updates (Stefan)
- support for recovery for the ublk driver (ZiyangZhang)
- rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)
- blk-mq and null_blk map fixes (Bart)
- various bcache fixes (Coly, Jilin, Jules)
- nbd signal hang fix (Shigeru)
- block writeback throttling fix (Yu)
- optimize the passthrough mapping handling (me)
- prepare block cgroups to being gendisk based (Christoph)
- get rid of an old PSI hack in the block layer, moving it to the
callers instead where it belongs (Christoph)
- blk-throttle fixes and cleanups (Yu)
- misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
Miaohe, Bart, Coly, Gaosheng
* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
Replace blk_queue_nowait with a bdev_nowait helpers that takes the
block_device given that the I/O submission path should not have to
look into the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20220927075815.269694-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A regression is seen where mddev devices stay permanently after they
are stopped due to an elevated reference count.
This was tracked down to an extra mddev_get() in md_seq_start().
It only happened rarely because most of the time the md_seq_start()
is called with a zero offset. The path with an extra mddev_get() only
happens when it starts with a non-zero offset.
The commit noted below changed an mddev_get() to check its success
but inadvertently left the original call in. Remove the extra call.
Fixes: 12a6caf273 ("md: only delete entries from all_mddevs when the disk is freed")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guoqing Jiang <Guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
A race condition still exists when removing and re-creating md devices
in test cases. However, it is only seen on some setups.
The race condition was tracked down to a reference still being held
to the kobject by the rdev in the md_rdev_misc_wq which will be released
in rdev_delayed_delete().
md_alloc() waits for previous deletions by waiting on the md_misc_wq,
but the md_rdev_misc_wq may still be holding a reference to a recently
removed device.
To fix this, also flush the md_rdev_misc_wq in md_alloc().
Signed-off-by: David Sloan <david.sloan@eideticom.com>
[logang@deltatee.com: rewrote commit message]
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
The double indirect bio leads to somewhat suboptimal code generation.
Instead return the (original or split) bio, and make sure the
request_queue arguments to the lower level helpers is passed after the
bio to avoid constant reshuffling of the argument passing registers.
Also give it and the helpers used to implement it more descriptive names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220727162300.3089193-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we ran the lvm test "shell/integrity-blocksize-3.sh" on a kernel with
kasan, we got failure in write_page.
The reason for the failure is that md_bitmap_destroy is called before
destroying the thread and the thread may be waiting in the function
write_page for the bio to complete. When the thread finishes waiting, it
executes "if (test_bit(BITMAP_WRITE_ERROR, &bitmap->flags))", which
triggers the kasan warning.
Note that the commit 48df498daf that caused this bug claims that it is
neede for md-cluster, you should check md-cluster and possibly find
another bugfix for it.
BUG: KASAN: use-after-free in write_page+0x18d/0x680 [md_mod]
Read of size 8 at addr ffff889162030c78 by task mdX_raid1/5539
CPU: 10 PID: 5539 Comm: mdX_raid1 Not tainted 5.19.0-rc2 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report.cold+0x45/0x57a
? __lock_text_start+0x18/0x18
? write_page+0x18d/0x680 [md_mod]
kasan_report+0xa8/0xe0
? write_page+0x18d/0x680 [md_mod]
kasan_check_range+0x13f/0x180
write_page+0x18d/0x680 [md_mod]
? super_sync+0x4d5/0x560 [dm_raid]
? md_bitmap_file_kick+0xa0/0xa0 [md_mod]
? rs_set_dev_and_array_sectors+0x2e0/0x2e0 [dm_raid]
? mutex_trylock+0x120/0x120
? preempt_count_add+0x6b/0xc0
? preempt_count_sub+0xf/0xc0
md_update_sb+0x707/0xe40 [md_mod]
md_reap_sync_thread+0x1b2/0x4a0 [md_mod]
md_check_recovery+0x533/0x960 [md_mod]
raid1d+0xc8/0x2a20 [raid1]
? var_wake_function+0xe0/0xe0
? psi_group_change+0x411/0x500
? preempt_count_sub+0xf/0xc0
? _raw_spin_lock_irqsave+0x78/0xc0
? __lock_text_start+0x18/0x18
? raid1_end_read_request+0x2a0/0x2a0 [raid1]
? preempt_count_sub+0xf/0xc0
? _raw_spin_unlock_irqrestore+0x19/0x40
? del_timer_sync+0xa9/0x100
? try_to_del_timer_sync+0xc0/0xc0
? _raw_spin_lock_irqsave+0x78/0xc0
? __lock_text_start+0x18/0x18
? __list_del_entry_valid+0x68/0xa0
? finish_wait+0xa3/0x100
md_thread+0x161/0x260 [md_mod]
? unregister_md_personality+0xa0/0xa0 [md_mod]
? _raw_spin_lock_irqsave+0x78/0xc0
? prepare_to_wait_event+0x2c0/0x2c0
? unregister_md_personality+0xa0/0xa0 [md_mod]
kthread+0x148/0x180
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Allocated by task 5522:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x80/0xa0
md_bitmap_create+0xa8/0xe80 [md_mod]
md_run+0x777/0x1300 [md_mod]
raid_ctr+0x249c/0x4a30 [dm_raid]
dm_table_add_target+0x2b0/0x620 [dm_mod]
table_load+0x1c8/0x400 [dm_mod]
ctl_ioctl+0x29e/0x560 [dm_mod]
dm_compat_ctl_ioctl+0x7/0x20 [dm_mod]
__do_compat_sys_ioctl+0xfa/0x160
do_syscall_64+0x90/0xc0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 5680:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x40
kasan_set_free_info+0x20/0x40
__kasan_slab_free+0xf7/0x140
kfree+0x80/0x240
md_bitmap_free+0x1c3/0x280 [md_mod]
__md_stop+0x21/0x120 [md_mod]
md_stop+0x9/0x40 [md_mod]
raid_dtr+0x1b/0x40 [dm_raid]
dm_table_destroy+0x98/0x1e0 [dm_mod]
__dm_destroy+0x199/0x360 [dm_mod]
dev_remove+0x10c/0x160 [dm_mod]
ctl_ioctl+0x29e/0x560 [dm_mod]
dm_compat_ctl_ioctl+0x7/0x20 [dm_mod]
__do_compat_sys_ioctl+0xfa/0x160
do_syscall_64+0x90/0xc0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 48df498daf ("md: move bitmap_destroy to the beginning of __md_stop")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Two callers of md_alloc want to use the newly allocated devices, so
return it instead of letting them find it cumbersomely after the
allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-and-tested-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
autorun_devices should not be limited to the controls for the legacy
probe on open, so just call md_alloc directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-and-tested-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Eliminate the following coccicheck warning:
./drivers/md/md.c:8208:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After merging the block tree, today's linux-next build (x86_64
allmodconfig) failed like this:
drivers/md/md.c:717:22: error: 'mddev_find' defined but not used [-Werror=unused-function]
717 | static struct mddev *mddev_find(dev_t unit)
| ^~~~~~~~~~
cc1: all warnings being treated as errors
Caused by commit
4500d5c17910 ("md: simplify md_open")
Make mddev_find() available only for non-modular builds.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220721131132.070be166@canb.auug.org.au
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that devices are on the all_mddevs list until the gendisk is freed,
there can't be any duplicates. Remove the global list lookup and just
grab a reference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This ensures device names don't get prematurely reused. Instead add a
deleted flag to skip already deleted devices in mddev_get and other
places that only want to see live mddevs.
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just do a simple list_for_each_entry_safe on all_mddevs, and only grab a
reference when we drop the lock and delete the now unused for_each_mddev
macro.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just do a simple list_for_each_entry_safe on all_mddevs, and only grab a
reference when we drop the lock.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just do a plain list_for_each that only grabs a mddev reference in
the case where the thread sleeps and restarts the list iteration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This splits the code into nicely readable chunks and also avoids
the refcount inc/dec manipulations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The md_free name is rather misleading, so pick a better one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure that all private data is only freed once all accesses are done.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Error handling in md_alloc is a mess. Untangle it to just free the mddev
directly before add_disk is called and thus the gendisk is globally
visible. After that clear the hold flag and let the mddev_put take care
of cleaning up the mddev through the usual mechanisms.
Fixes: 5e55e2f5fc ("[PATCH] md: convert compile time warnings into runtime warnings")
Fixes: 9be68dd7ac ("md: add error handling support for add_disk()")
Fixes: 7ad1069166 ("md: properly unwind when failing to add the kobject in md_alloc")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Once a kobject is initialized, the containing object should not be
directly freed. So delay initialization until it is added. Also
remove the kobject_del call as the last put will remove the kobject as
well. The explicitly delete isn't needed here, and dropping it will
simplify further fixes.
With this md_free now does not need to check that ->gendisk is non-NULL
as it is always set by the time that kobject_init is called on
mddev->kobj.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the bug which commit 8b48ec23cc ("md: don't unregister sync_thread
with reconfig_mutex held") fixed is related with action_store path, other
callers which reap sync_thread didn't need to be changed.
Let's pull md_unregister_thread from md_reap_sync_thread, then fix previous
bug with belows.
1. unlock mddev before md_reap_sync_thread in action_store.
2. save reshape_position before unlock, then restore it to ensure position
not changed accidentally by others.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Boot-time assembly of arrays with md= command-line arguments breaks when
CONFIG_BLOCK_LEGACY_AUTOLOAD is unset. md_setup_drive() in md-autodetect.c
calls blkdev_get_by_dev(), assuming this implicitly creates the block
device.
Fix this by attempting to md_alloc() the array first. As in the probe path,
ignore any error as failure is caught by blkdev_get_by_dev() anyway.
Signed-off-by: Chris Webb <chris@arachsys.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The mdadm test 07layouts randomly produces a kernel hung task deadlock.
The deadlock is caused by the suspend_lo/suspend_hi files being set by
the mdadm background process during reshape and not being cleared
because the process hangs. (Leaving aside the issue of the fragility of
freezing kernel tasks by buggy userspace processes...)
When the background mdadm process hangs it, is waiting (without a
timeout) on a change to the sync_completed file signalling that the
reshape has completed. The process is woken up a couple times when
the reshape finishes but it is woken up before MD_RECOVERY_RUNNING
is cleared so sync_completed_show() reports 0 instead of "none".
To fix this, notify the sysfs file in md_reap_sync_thread() after
MD_RECOVERY_RUNNING has been cleared. This wakes up mdadm and causes
it to continue and write to suspend_lo/suspend_hi to allow IO to
continue.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 07layouts test in mdadm fails on some systems. The failure
presents itself as the backup file not being removed before the next
layout is grown into:
mdadm: /dev/md0: cannot create backup file /tmp/md-test-backup:
File exists
This is because the background mdadm process, which is responsible for
cleaning up this backup file gets into an infinite loop waiting for
the reshape to start. mdadm checks the mdstat file if a reshape is
going and, if it is not, it waits for an event on the file or times
out in 5 seconds. On faster machines, the reshape may complete before
the 5 seconds times out, and thus the background mdadm process loops
waiting for a reshape to start that has already occurred.
mdadm reads the mdstat file to start, but mdstat does not report that the
reshape has begun, even though it has indeed begun. So the mdstat_wait()
call (in mdadm) which polls on the mdstat file won't ever return until
timing out.
The reason mdstat reports the reshape has started is due to an issue
in status_resync(). recovery_active is subtracted from curr_resync which
will result in a value of zero for the first chunk of reshaped data, and
the resulting read will report no reshape in progress.
To fix this, if "resync - recovery_active" is an overloaded value, force
the value to be MD_RESYNC_ACTIVE so the code reports a resync in progress.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Comments in the code document special values used for
mddev->curr_resync. Make this clearer by using an enum to label these
values.
The only functional change is a couple places use the wrong comparison
operator that implied 3 is another special value. They are all
fixed to imply that 3 or greater is an active resync.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve uniformity in the kernel of handling of request operation and
flags by passing these as a single argument.
Cc: Song Liu <song@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-32-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the remaining calls of bdevname with snprintf using the %pg
format specifier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220713055317.1888500-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 07reshape5intr test is broke because of below path.
md_reap_sync_thread
-> mddev_unlock
-> md_unregister_thread(&mddev->sync_thread)
And md_check_recovery is triggered by,
mddev_unlock -> md_wakeup_thread(mddev->thread)
then mddev->reshape_position is set to MaxSector in raid5_finish_reshape
since MD_RECOVERY_INTR is cleared in md_check_recovery, which means
feature_map is not set with MD_FEATURE_RESHAPE_ACTIVE and superblock's
reshape_position can't be updated accordingly.
Fixes: 8b48ec23cc ("md: don't unregister sync_thread with reconfig_mutex held")
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Now io_acct_set is alloc and free in personality. Remove the codes that
free io_acct_set in md_free and md_stop.
Fixes: 0c031fd37f (md: Move alloc/free acct bioset in to personality)
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Use the %pg format specifier to save on stack consumption and code size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Generally, the md_unregister_thread is called with reconfig_mutex, but
raid_message in dm-raid doesn't hold reconfig_mutex to unregister thread,
so md_unregister_thread can be called simulitaneously from two call sites
in theory.
Then after previous commit which remove the protection of reconfig_mutex
for md_unregister_thread completely, the potential issue could be worse
than before.
Let's take pers_lock at the beginning of function to ensure reentrancy.
Reported-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Unregister sync_thread doesn't need to hold reconfig_mutex since it
doesn't reconfigure array.
And it could cause deadlock problem for raid5 as follows:
1. process A tried to reap sync thread with reconfig_mutex held after echo
idle to sync_action.
2. raid5 sync thread was blocked if there were too many active stripes.
3. SB_CHANGE_PENDING was set (because of write IO comes from upper layer)
which causes the number of active stripes can't be decreased.
4. SB_CHANGE_PENDING can't be cleared since md_check_recovery was not able
to hold reconfig_mutex.
More details in the link:
https://lore.kernel.org/linux-raid/5ed54ffc-ce82-bf66-4eff-390cb23bc1ac@molgen.mpg.de/T/#t
And add one parameter to md_reap_sync_thread since it could be called by
dm-raid which doesn't hold reconfig_mutex.
Reported-and-tested-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <song@kernel.org>
There are several instances where magic numbers are used in md.c instead
of the defined constants in md_p.h. This patch set improves code
readability by replacing all occurrences of 0xffff, 0xfffe, and 0xfffd when
relating to md roles with their equivalent defined constant.
Signed-off-by: David Sloan <david.sloan@eideticom.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
This commit includes two topics:
1> replace deprecated strlcpy
change strlcpy to strscpy for strlcpy is marked as deprecated in
Documentation/process/deprecated.rst
2> remove duplicated strlcpy line
in md_bitmap_read_sb@md-bitmap.c there are two duplicated strlcpy(), the
history:
- commit cf921cc19c ("Add node recovery callbacks") introduced the first
usage of strlcpy().
- commit b97e92574c ("Use separate bitmaps for each nodes in the cluster")
introduced the second strlcpy(). this time, the two strlcpy() are same,
we can remove anyone safely.
- commit d3b178adb3 ("md: Skip cluster setup for dm-raid") added dm-raid
special handling. And the "nodes" value is the key of this patch. but
from this patch, strlcpy() which was introduced by b97e92574c
become necessary.
- commit 3c462c880b ("md: Increment version for clustered bitmaps") used
clustered major version to only handle in clustered env. this patch
could look a polishment for clustered code logic.
So cf921cc19c became useless after d3b178adb3, we could remove it
safely.
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
The bug is here:
if (!rdev || rdev->desc_nr != nr) {
The list iterator value 'rdev' will *always* be set and non-NULL
by rdev_for_each_rcu(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
found (In fact, it will be a bogus pointer to an invalid struct
object containing the HEAD). Otherwise it will bypass the check
and lead to invalid memory access passing the check.
To fix the bug, use a new variable 'iter' as the list iterator,
while using the original variable 'pdev' as a dedicated pointer to
point to the found element.
Cc: stable@vger.kernel.org
Fixes: 70bcecdb15 ("md-cluster: Improve md_reload_sb to be less error prone")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Song Liu <song@kernel.org>
The bug is here:
if (!rdev)
The list iterator value 'rdev' will *always* be set and non-NULL
by rdev_for_each(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element found.
Otherwise it will bypass the NULL check and lead to invalid memory
access passing the check.
To fix the bug, use a new variable 'iter' as the list iterator,
while using the original variable 'rdev' as a dedicated pointer to
point to the found element.
Cc: stable@vger.kernel.org
Fixes: 2aa82191ac ("md-cluster: Perform a lazy update")
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Acked-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
There is no direct mechanism to determine raid failure outside
personality. It is done by checking rdev->flags after executing
md_error(). If "faulty" flag is not set then -EBUSY is returned to
userspace. -EBUSY means that array will be failed after drive removal.
Mdadm has special routine to handle the array failure and it is executed
if -EBUSY is returned by md.
There are at least two known reasons to not consider this mechanism
as correct:
1. drive can be removed even if array will be failed[1].
2. -EBUSY seems to be wrong status. Array is not busy, but removal
process cannot proceed safe.
-EBUSY expectation cannot be removed without breaking compatibility
with userspace. In this patch first issue is resolved by adding support
for MD_BROKEN flag for RAID1 and RAID10. Support for RAID456 is added in
next commit.
The idea is to set the MD_BROKEN if we are sure that raid is in failed
state now. This is done in each error_handler(). In md_error() MD_BROKEN
flag is checked. If is set, then -EBUSY is returned to userspace.
As in previous commit, it causes that #mdadm --set-faulty is able to
fail array. Previously proposed workaround is valid if optional
functionality[1] is disabled.
[1] commit 9a567843f7ce("md: allow last device to be forcibly removed from
RAID1/RAID10.")
Reviewd-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
Secure erase is a very different operation from discard in that it is
a data integrity operation vs hint. Fully split the limits and helper
infrastructure to make the separation more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2]
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check the nonrot flag based on the block_device instead
of having to poke into the block layer internal request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=993h
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe updates via Christoph:
- add vectored-io support for user-passthrough (Kanchan Joshi)
- add verbose error logging (Alan Adamson)
- support buffered I/O on block devices in nvmet (Chaitanya
Kulkarni)
- central discovery controller support (Martin Belanger)
- fix and extended the globally unique idenfier validation
(Christoph)
- move away from the deprecated IDA APIs (Sagi Grimberg)
- misc code cleanup (Keith Busch, Max Gurtovoy, Qinghua Jin,
Chaitanya Kulkarni)
- add lockdep annotations for in-kernel sockets (Chris Leech)
- use vmalloc for ANA log buffer (Hannes Reinecke)
- kerneldoc fixes (Chaitanya Kulkarni)
- cleanups (Guoqing Jiang, Chaitanya Kulkarni, Christoph)
- warn about shared namespaces without multipathing (Christoph)
- MD updates via Song with a set of cleanups (Christoph, Mariusz, Paul,
Erik, Dirk)
- loop cleanups and queue depth configuration (Chaitanya)
- null_blk cleanups and fixes (Chaitanya)
- Use descriptive init/exit names in virtio_blk (Randy)
- Use bvec_kmap_local() in drivers (Christoph)
- bcache fixes (Mingzhe)
- xen blk-front persistent grant speedups (Juergen)
- rnbd fix and cleanup (Gioh)
- Misc fixes (Christophe, Colin)
* tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block: (76 commits)
virtio_blk: eliminate anonymous module_init & module_exit
nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH
nvme: remove nvme_alloc_request and nvme_alloc_request_qid
nvme: cleanup how disk->disk_name is assigned
nvmet: move the call to nvmet_ns_changed out of nvmet_ns_revalidate
nvmet: use snprintf() with PAGE_SIZE in configfs
nvmet: don't fold lines
nvmet-rdma: fix kernel-doc warning for nvmet_rdma_device_removal
nvmet-fc: fix kernel-doc warning for nvmet_fc_unregister_targetport
nvmet-fc: fix kernel-doc warning for nvmet_fc_register_targetport
nvme-tcp: lockdep: annotate in-kernel sockets
nvme-tcp: don't fold the line
nvme-tcp: don't initialize ret variable
nvme-multipath: call bio_io_error in nvme_ns_head_submit_bio
nvme-multipath: use vmalloc for ANA log buffer
xen/blkfront: speed up purge_persistent_grants()
raid5: initialize the stripe_head embeeded bios as needed
raid5-cache: statically allocate the recovery ra bio
raid5-cache: fully initialize flush_bio when needed
raid5-ppl: fully initialize the bio in ppl_new_iounit
...
Calling mdelay(1000) from process context, even while a reboot
is in progress, does not make sense.
Using msleep() allows other threads to make progress.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: linux-raid@vger.kernel.org
Signed-off-by: Song Liu <song@kernel.org>
Pass a block_device to bio_clone_fast and __bio_clone_fast and give
the functions more suitable names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
