Commit graph

19 commits

Author SHA1 Message Date
Thomas Gleixner
1a59d1b8e0 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:35 -07:00
James Bottomley
aa9f8328fc [SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type
These enums have been separate since the dawn of SAS, mainly because the
latter is a procotol only enum and the former includes additional state
for libsas.  The dichotomy causes endless confusion about which one you
should use where and leads to pointless warnings like this:

drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo':
drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare]

Fix by eliminating one of them.  The one kept is effectively the sas.h
one, but call it sas_device_type and make sure the enums are all
properly namespaced with the SAS_ prefix.

Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10 07:47:52 -07:00
Dan Williams
303694eeee [SCSI] libsas: suspend / resume support
libsas power management routines to suspend and recover the sas domain
based on a model where the lldd is allowed and expected to be
"forgetful".

sas_suspend_ha - disable event processing allowing the lldd to take down
                 links without concern for causing hotplug events.
                 Regardless of whether the lldd actually posts link down
                 messages libsas notifies the lldd that all
                 domain_devices are gone.

sas_prep_resume_ha - on the way back up before the lldd starts link
                     training clean out any spurious events that were
                     generated on the way down, and re-enable event
                     processing

sas_resume_ha - after the lldd has started and decided that all phys
		have posted link-up events this routine is called to let
		libsas start it's own timeout of any phys that did not
		resume.  After the timeout an lldd can cancel the
                phy teardown by posting a link-up event.

Storage for ex_change_count (u16) and phy_change_count (u8) are changed
to int so they can be set to -1 to indicate 'invalidated'.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jacek Danecki <jacek.danecki@intel.com>
Tested-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-24 13:10:23 +04:00
Dan Williams
e4a9c3732c [SCSI] libata, libsas: introduce sched_eh and end_eh port ops
When managing shost->host_eh_scheduled libata assumes that there is a
1:1 shost-to-ata_port relationship.  libsas creates a 1:N relationship
so it needs to manage host_eh_scheduled cumulatively at the host level.
The sched_eh and end_eh port port ops allow libsas to track when domain
devices enter/leave the "eh-pending" state under ha->lock (previously
named ha->state_lock, but it is no longer just a lock for ha->state
changes).

Since host_eh_scheduled indicates eh without backing commands pinning
the device it can be deallocated at any time.  Move the taking of the
domain_device reference under the port_lock to guarantee that the
ata_port stays around for the duration of eh.

Reviewed-by: Jacek Danecki <jacek.danecki@intel.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:58:45 +01:00
Dan Williams
b202445925 [SCSI] libsas, libata: fix start of life for a sas ata_port
This changes the ordering of initialization and probing events from:
  1/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN
  2/ allocate ata_port and schedule port probe in DISCE_PROBE
...to:
  1/ allocate ata_port in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN
  2/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN
  3/ schedule port probe in DISCE_PROBE

This ordering prevents PHYE_SIGNAL_LOSS_EVENTS from sneaking in to
destrory ata devices before they have been fully initialized:

  BUG: unable to handle kernel paging request at 0000000000003b10
  IP: [<ffffffffa0053d7e>] sas_ata_end_eh+0x12/0x5e [libsas]
  ...
  [<ffffffffa004d1af>] sas_unregister_common_dev+0x78/0xc9 [libsas]
  [<ffffffffa004d4d4>] sas_unregister_dev+0x4f/0xad [libsas]
  [<ffffffffa004d5b1>] sas_unregister_domain_devices+0x7f/0xbf [libsas]
  [<ffffffffa004c487>] sas_deform_port+0x61/0x1b8 [libsas]
  [<ffffffffa004bed0>] sas_phye_loss_of_signal+0x29/0x2b [libsas]

...and kills the awkward "sata domain_device briefly existing in the
domain without an ata_port" state.

Reported-by: Michal Kosciowski <michal.kosciowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 12:11:47 +01:00
Dan Williams
9508a66f89 [SCSI] libsas: async ata scanning
libsas ata error handling is already async but this does not help the
scan case.  Move initial link recovery out from under host->scan_mutex,
and delay synchronization with eh until after all port probe/recovery
work has been queued.

Device ordering is maintained with scan order by still calling
sas_rphy_add() in order of domain discovery.

Since we now scan the domain list when invoking libata-eh we need to be
careful to check for fully initialized ata ports.

Acked-by: Jack Wang <jack_wang@usish.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:35:41 -06:00
Dan Williams
92625f9bff [SCSI] libsas: restore scan order
ata devices are always scanned after ssp.  Prior to the ata error
handling reworks libsas would tend to scan devices in ascending expander
phy order.  Restore this ordering by deferring ssp discovery to a
DISCE_PROBE event, and keep the probe order consistent with the
discovery order, not the placement of sata devices.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:34:19 -06:00
Dan Williams
354cf82980 [SCSI] libsas: let libata recover links that fail to transmit initial sig-fis
libsas fails to discover all sata devices in the domain.  If a device fails
negotiation and does not transmit a signature fis the link needs recovery.
libata already understands how to manage slow to come up links, so treat these
conditions as ata device attach events for the purposes of creating an
ata_port.  This allows libata to manage retrying link bring up.

Rediscovery is modified to be careful about checking changes in dev_type.  It
looks like libsas leaks old devices if the sas address changes, but that's a
fix for another patch.

Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:33:02 -06:00
Dan Williams
d230ce691c [SCSI] libsas: fix mixed topology recovery
If we have a domain with sas and sata devices there may still be sas
recovery actions to take after peeling off the commands to send to
libata.

Reported-by: Andrzej Jakowski <andrzej.jakowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:23:24 -06:00
Dan Williams
81c757bc69 [SCSI] libsas: execute transport link resets with libata-eh via host workqueue
Link resets leave ata affiliations intact, so arrange for libsas to make
an effort to avoid dropping the device due to a slow-to-recover link.
Towards this end carry out reset in the host workqueue so that it can
check for ata devices and kick the reset request to libata.  Hard
resets, in contrast, bypass libata since they are meant for associating
an ata device with another initiator in the domain (tears down
affiliations).

Need to add a new transport_sas_phy_reset() since the current
sas_phy_reset() is a utility function to libsas lldds.  They are not
prepared for it to loop back into eh.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 14:13:51 -06:00
Dan Williams
b52df4174d [SCSI] libsas: use libata-eh-reset for sata rediscovery fis transmit failures
Since sata devices can take several seconds to recover the link on reset
the 0.5 seconds that libsas currently waits may not be enough.  Instead
if we are rediscovering a phy that was previously attached to a sata
device let libata handle any resets to encourage the device to transmit
the initial fis.

Once sas_ata_hard_reset() and lldds learn how to honor 'deadline' libsas
should stop encountering phys in an intermediate state, until then this
will loop until the fis is transmitted or ->attached_sas_addr gets
cleared, but in the more likely initial discovery case we keep existing
behavior.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 14:09:32 -06:00
Dan Williams
9095a64a9a [SCSI] libsas: fix timeout vs completion race
Until we have told the lldd to forget a task a timed out operation can
return from the hardware at any time.  Since completion frees the task
we need to make sure that no tasks run their normal completion handler
once eh has decided to manage the task.  Similar to
ata_scsi_cmd_error_handler() freeze completions to let eh judge the
outcome of the race.

Task collector mode is problematic because it presents a situation where
a task can be timed out and aborted before the lldd has even seen it.
For this case we need to guarantee that a task that an lldd has been
told to forget does not get queued after the lldd says "never seen it".
With sas_scsi_timed_out we achieve this with the ->task_queue_flush
mutex, rather than adding more time.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 14:06:08 -06:00
Dan Williams
87c8331fcf [SCSI] libsas: prevent domain rediscovery competing with ata error handling
libata error handling provides for a timeout for link recovery.  libsas
must not rescan for previously known devices in this interval otherwise
it may remove a device that is simply waiting for its link to recover.
Let libata-eh make the determination of when the link is stable and
prevent libsas (host workqueue) from taking action while this
determination is pending.

Using a mutex (ha->disco_mutex) to flush and disable revalidation while
eh is running requires any discovery action that may block on eh be
moved to its own context outside the lock.  Probing ATA devices
explicitly waits on ata-eh and the cache-flush-io issued during device
removal may also pend awaiting eh completion.  Essentially any rphy
add/remove activity needs to run outside the lock.

This adds two new cleanup states for sas_unregister_domain_devices()
'allocated-but-not-probed', and 'flagged-for-destruction'.  In the
'allocated-but-not-probed' state  dev->rphy points to a rphy that is
known to have not been through a sas_rphy_add() event.  At domain
teardown check if this device is still pending probe and cleanup
accordingly.  Similarly if a device has already been queued for removal
then sas_unregister_domain_devices has nothing to do.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 13:52:34 -06:00
Dan Williams
756f173fb5 [SCSI] libsas: fix leak of dev->sata_dev.identify_[packet_]device
These are never freed in the nominal path.  A domain_device has a
different lifetime than a sas_rphy we need a dev->rphy independent way
of identifying sata devices.

Reviewed-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 13:39:36 -06:00
James Bottomley
00dd4998a6 libsas: convert to libata new error handler
The conversion is quite complex given that the libata new error
handler has to be hooked into the current libsas timeout and error
handling.  The way this is done is to process all the failed commands
via libsas first, but if they have no underlying sas task (and they're
on a sata device) assume they are destined for the libata error
handler and send them accordingly.

Finally, activate the port recovery of the libata error handler for
each port known to the host.  This is somewhat suboptimal, since that
port may not need recovering, but given the current architecture of
the libata error handler, it's the only way; and the spurious
activation is harmless.

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02 02:36:45 -05:00
James Bottomley
79bc14813c [SCSI] libsas: fix missing inlines in header file
Two functions in include/scsi/sas_ata.h don't have static inlines
leading to problems if they're built in:

On Thu, 2008-04-03 at 14:06 +0200, Toralf Förster wrote:
> drivers/scsi/mvsas.o: In function `sas_ata_init_host_and_port':
> mvsas.c:(.text+0x0): multiple definition of `sas_ata_init_host_and_port'
> drivers/scsi/libsas/built-in.o:(.text+0x37f4): first defined here
> drivers/scsi/mvsas.o: In function `sas_ata_task_abort':
> mvsas.c:(.text+0x7): multiple definition of `sas_ata_task_abort'
> drivers/scsi/libsas/built-in.o:(.text+0x37fb): first defined here
> make[2]: *** [drivers/scsi/built-in.o] Error 1
> make[1]: *** [drivers/scsi] Error 2
> make: *** [drivers] Error 2

Add the correct static inline modifiers.

Tested-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:10 -05:00
James Bottomley
b91421749a [SCSI] libsas: make ATA functions selectable by a config option
Not everyone wants libsas automatically to pull in libata.  This patch
makes the behaviour configurable, so you can build libsas with or
without ATA support.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-22 13:23:13 -05:00
Darrick J. Wong
3a2755af37 [SCSI] sas_ata: Implement sas_task_abort for ATA devices
ATA devices need special handling for sas_task_abort.  If the ATA command
came from SCSI, then we merely need to tell SCSI to abort the scsi_cmnd.
However, internal commands require a bit more work--we need to fill the qc
with the appropriate error status and complete the command, and eventually
post_internal will issue the actual ABORT TASK.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18 11:16:03 -05:00
Darrick J. Wong
338ec57003 [SCSI] Migrate libsas ATA code into a separate file
This is a respin of my earlier patch that migrates the ATA support code
into a separate file.  For now, the controversial linking bits have
been removed per James Bottomley's request for a patch that contains
only the migration diffs, which means that libsas continues to require
libata.  I intend to address that problem in a separate patch.

This patch is against the aic94xx-sas-2.6 git tree, and it has been
sanity tested on my x206m with Seagate SATA and SAS disks without
uncovering any new problems.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18 11:14:40 -05:00