commit f63a5b3769 upstream.
We've been seeing XFS errors like the following:
XFS: Internal error i != 1 at line 3526 of file fs/xfs/libxfs/xfs_btree.c. Caller xfs_btree_insert+0x1ec/0x280
...
Call Trace:
xfs_corruption_error+0x94/0xa0
xfs_btree_insert+0x221/0x280
xfs_alloc_fixup_trees+0x104/0x3e0
xfs_alloc_ag_vextent_size+0x667/0x820
xfs_alloc_fix_freelist+0x5d9/0x750
xfs_free_extent_fix_freelist+0x65/0xa0
__xfs_free_extent+0x57/0x180
...
This is the XFS_IS_CORRUPT() check in xfs_btree_insert() when
xfs_btree_insrec() fails.
After converting this into a panic and dissecting the core dump, I found
that xfs_btree_insrec() is failing because it's trying to split a leaf
node in the cntbt when the AG free list is empty. In particular, it's
failing to get a block from the AGFL _while trying to refill the AGFL_.
If a single operation splits every level of the bnobt and the cntbt (and
the rmapbt if it is enabled) at once, the free list will be empty. Then,
when the next operation tries to refill the free list, it allocates
space. If the allocation does not use a full extent, it will need to
insert records for the remaining space in the bnobt and cntbt. And if
those new records go in full leaves, the leaves (and potentially more
nodes up to the old root) need to be split.
Fix it by accounting for the additional splits that may be required to
refill the free list in the calculation for the minimum free list size.
P.S. As far as I can tell, this bug has existed for a long time -- maybe
back to xfs-history commit afdf80ae7405 ("Add XFS_AG_MAXLEVELS macros
...") in April 1994! It requires a very unlucky sequence of events, and
in fact we didn't hit it until a particular sparse mmap workload updated
from 5.12 to 5.19. But this bug existed in 5.12, so it must've been
exposed by some other change in allocation or writeback patterns. It's
also much less likely to be hit with the rmapbt enabled, since that
increases the minimum free list size and is unlikely to split at the
same time as the bnobt and cntbt.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 471de20303 upstream.
We flush the data device cache before we issue external log IO. If
the flush fails, we shut down the log immediately and return. However,
the iclog->ic_sema is left in a decremented state so let's add an up().
Prior to this patch, xfs/438 would fail consistently when running with
an external log device:
sync
-> xfs_log_force
-> xlog_write_iclog
-> down(&iclog->ic_sema)
-> blkdev_issue_flush (fail causes us to intiate shutdown)
-> xlog_force_shutdown
-> return
unmount
-> xfs_log_umount
-> xlog_wait_iclog_completion
-> down(&iclog->ic_sema) --------> HANG
There is a second early return / shutdown. Make sure the up() happens
for it as well. Also make sure we cleanup the iclog state,
xlog_state_done_syncing, before dropping the iclog lock.
Fixes: b5d721eaae ("xfs: external logs need to flush data device")
Fixes: 842a42d126 ("xfs: shutdown on failure to add page to log bio")
Fixes: 7d839e325a ("xfs: check return codes when flushing block devices")
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 55f669f341 upstream.
xfs_reflink_end_cow_extent looks up the COW extent and the data fork
extent at offset_fsb, and then proceeds to remap the common subset
between the two.
It does however not limit the remapped extent to the passed in
[*offset_fsbm end_fsb] range and thus potentially remaps more blocks than
the one handled by the current I/O completion. This means that with
sufficiently large data and COW extents we could be remapping COW fork
mappings that have not been written to, leading to a stale data exposure
on a powerfail event.
We use to have a xfs_trim_range to make the remap fit the I/O completion
range, but that got (apparently accidentally) removed in commit
df2fd88f8a ("xfs: rewrite xfs_reflink_end_cow to use intents").
Note that I've only found this by code inspection, and a test case would
probably require very specific delay and error injection.
Fixes: df2fd88f8a ("xfs: rewrite xfs_reflink_end_cow to use intents")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f8f9d952e4 upstream.
When recovering intents, we capture newly created intent items as part of
committing recovered intent items. If intent recovery fails at a later
point, we forget to remove those newly created intent items from the AIL
and hang:
[root@localhost ~]# cat /proc/539/stack
[<0>] xfs_ail_push_all_sync+0x174/0x230
[<0>] xfs_unmount_flush_inodes+0x8d/0xd0
[<0>] xfs_mountfs+0x15f7/0x1e70
[<0>] xfs_fs_fill_super+0x10ec/0x1b20
[<0>] get_tree_bdev+0x3c8/0x730
[<0>] vfs_get_tree+0x89/0x2c0
[<0>] path_mount+0xecf/0x1800
[<0>] do_mount+0xf3/0x110
[<0>] __x64_sys_mount+0x154/0x1f0
[<0>] do_syscall_64+0x39/0x80
[<0>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
When newly created intent items fail to commit via transaction, intent
recovery hasn't created done items for these newly created intent items,
so the capture structure is the sole owner of the captured intent items.
We must release them explicitly or else they leak:
unreferenced object 0xffff888016719108 (size 432):
comm "mount", pid 529, jiffies 4294706839 (age 144.463s)
hex dump (first 32 bytes):
08 91 71 16 80 88 ff ff 08 91 71 16 80 88 ff ff ..q.......q.....
18 91 71 16 80 88 ff ff 18 91 71 16 80 88 ff ff ..q.......q.....
backtrace:
[<ffffffff8230c68f>] xfs_efi_init+0x18f/0x1d0
[<ffffffff8230c720>] xfs_extent_free_create_intent+0x50/0x150
[<ffffffff821b671a>] xfs_defer_create_intents+0x16a/0x340
[<ffffffff821bac3e>] xfs_defer_ops_capture_and_commit+0x8e/0xad0
[<ffffffff82322bb9>] xfs_cui_item_recover+0x819/0x980
[<ffffffff823289b6>] xlog_recover_process_intents+0x246/0xb70
[<ffffffff8233249a>] xlog_recover_finish+0x8a/0x9a0
[<ffffffff822eeafb>] xfs_log_mount_finish+0x2bb/0x4a0
[<ffffffff822c0f4f>] xfs_mountfs+0x14bf/0x1e70
[<ffffffff822d1f80>] xfs_fs_fill_super+0x10d0/0x1b20
[<ffffffff81a21fa2>] get_tree_bdev+0x3d2/0x6d0
[<ffffffff81a1ee09>] vfs_get_tree+0x89/0x2c0
[<ffffffff81a9f35f>] path_mount+0xecf/0x1800
[<ffffffff81a9fd83>] do_mount+0xf3/0x110
[<ffffffff81aa00e4>] __x64_sys_mount+0x154/0x1f0
[<ffffffff83968739>] do_syscall_64+0x39/0x80
Fix the problem above by abort intent items that don't have a done item
when recovery intents fail.
Fixes: e6fff81e48 ("xfs: proper replay of deferred ops queued during log recovery")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2a5db859c6 upstream.
Factor out xfs_defer_pending_abort() from xfs_defer_trans_abort(), which
not use transaction parameter, so it can be used after the transaction
life cycle.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 14a537983b upstream.
One of our VM cluster management products needs to snapshot KVM image
files so that they can be restored in case of failure. Snapshotting is
done by redirecting VM disk writes to a sidecar file and using reflink
on the disk image, specifically the FICLONE ioctl as used by
"cp --reflink". Reflink locks the source and destination files while it
operates, which means that reads from the main vm disk image are blocked,
causing the vm to stall. When an image file is heavily fragmented, the
copy process could take several minutes. Some of the vm image files have
50-100 million extent records, and duplicating that much metadata locks
the file for 30 minutes or more. Having activities suspended for such
a long time in a cluster node could result in node eviction.
Clone operations and read IO do not change any data in the source file,
so they should be able to run concurrently. Demote the exclusive locks
taken by FICLONE to shared locks to allow reads while cloning. While a
clone is in progress, writes will take the IOLOCK_EXCL, so they block
until the clone completes.
Link: https://lore.kernel.org/linux-xfs/8911B94D-DD29-4D6E-B5BC-32EAF1866245@oracle.com/
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 35dc55b9e8 upstream.
If xfs_bmapi_write finds a delalloc extent at the requested range, it
tries to convert the entire delalloc extent to a real allocation.
But if the allocator cannot find a single free extent large enough to
cover the start block of the requested range, xfs_bmapi_write will
return 0 but leave *nimaps set to 0.
In that case we simply need to keep looping with the same startoffset_fsb
so that one of the following allocations will eventually reach the
requested range.
Note that this could affect any caller of xfs_bmapi_write that covers
an existing delayed allocation. As far as I can tell we do not have
any other such caller, though - the regular writeback path uses
xfs_bmapi_convert_delalloc to convert delayed allocations to real ones,
and direct I/O invalidates the page cache first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2b99e410b2 upstream.
When abnormal drop_nlink are detected on the inode,
return error, to avoid corruption propagation.
Signed-off-by: Cheng Lin <cheng.lin130@zte.com.cn>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f6a2dae2a1 upstream.
In commit 2a6ca4baed, we tried to fix an overflow problem in the
realtime allocator that was caused by an overly large maxlen value
causing xfs_rtcheck_range to run off the end of the realtime bitmap.
Unfortunately, there is a subtle bug here -- maxlen (and minlen) both
have to be aligned with @prod, but @prod can be larger than 1 if the
user has set an extent size hint on the file, and that extent size hint
is larger than the realtime extent size.
If the rt free space extents are not aligned to this file's extszhint
because other files without extent size hints allocated space (or the
number of rt extents is similarly not aligned), then it's possible that
maxlen after clamping to sb_rextents will no longer be aligned to prod.
The allocation will succeed just fine, but we still trip the assertion.
Fix the problem by reducing maxlen by any misalignment with prod. While
we're at it, split the assertions into two so that we can tell which
value had the bad alignment.
Fixes: 2a6ca4baed ("xfs: make sure the rt allocator doesn't run off the end")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ddd98076d5 upstream.
The unit conversions in this function do not make sense. First we
convert a block count to bytes, then divide that bytes value by
rextsize, which is in blocks, to get an rt extent count. You can't
divide bytes by blocks to get a (possibly multiblock) extent value.
Fortunately nobody uses delalloc on the rt volume so this hasn't
mattered.
Fixes: fa5c836ca8 ("xfs: refactor xfs_bunmapi_cow")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c2988eb5cf upstream.
When realtime support is not compiled into the kernel, these functions
should return negative errnos, not positive errnos. While we're at it,
fix a broken macro declaration.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b73494fa9a upstream.
Quotas aren't (yet) supported with realtime, so we shouldn't allow
userspace to set up a realtime section when quotas are enabled, even if
they attached one via mount options. IOWS, you shouldn't be able to do:
# mkfs.xfs -f /dev/sda
# mount /dev/sda /mnt -o rtdev=/dev/sdb,usrquota
# xfs_growfs -r /mnt
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6c66448433 upstream.
Currently, xfs_bmap_del_extent_real contains a bunch of code to convert
the physical extent of a data fork mapping for a realtime file into rt
extents and pass that to the rt extent freeing function. Since the
details of this aren't needed when CONFIG_XFS_REALTIME=n, move it to
xfs_rtbitmap.c to reduce code size when realtime isn't enabled.
This will (one day) enable realtime EFIs to reuse the same
unit-converting call with less code duplication.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9488062805 upstream.
The latest version of the fs geometry structure is v5. Bump this
constant so that xfs_db and mkfs calls to libxfs_fs_geometry will fill
out all the fields.
IOWs, this commit is a no-op for the kernel, but will be useful for
userspace reporting in later changes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This is an attempt to direct the bots and humans that are testing
LTS 6.6.y towards the maintainer of xfs in the 6.6.y tree.
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e08ff622c9 upstream.
This is the next upgrade to the Rust toolchain, from 1.72.1 to 1.73.0
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da0 ("rust: upgrade to Rust 1.68.2").
# Unstable features
No unstable features (that we use) were stabilized.
Therefore, the only unstable feature allowed to be used outside
the `kernel` crate is still `new_uninit`, though other code to be
upstreamed may increase the list.
Please see [3] for details.
# Required changes
For the upgrade, the following changes are required:
- Allow `internal_features` for `feature(compiler_builtins)` since
now Rust warns about using internal compiler and standard library
features (similar to how it also warns about incomplete ones) [4].
- A cleanup for a documentation link thanks to a new `rustdoc` lint.
See previous commits for details.
- A need to make an intra-doc link to a macro explicit, due to a
change in behavior in `rustdoc`. See previous commits for details.
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1730-2023-10-05 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [3]
Link: https://github.com/rust-lang/compiler-team/issues/596 [4]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231005210556.466856-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a53d8cdd5a upstream.
The future `rustdoc` in the Rust 1.73.0 upgrade requires an explicit
link for `pr_info!`:
error: unresolved link to `pr_info`
--> rust/kernel/print.rs:395:63
|
395 | /// Use only when continuing a previous `pr_*!` macro (e.g. [`pr_info!`]).
| ^^^^^^^^ no item named `pr_info` in scope
|
= note: `macro_rules` named `pr_info` exists in this crate, but it is not in scope at this link's location
= note: `-D rustdoc::broken-intra-doc-links` implied by `-D warnings`
Thus do so to avoid a broken link while upgrading.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Finn Behrens <me@kloenk.dev>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20231005210556.466856-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c61bcc278b upstream.
Starting with Rust 1.73.0, `rustdoc` detects redundant explicit
links with its new lint `redundant_explicit_links` [1]:
error: redundant explicit link target
--> rust/kernel/task.rs:85:21
|
85 | /// [`current`](crate::current) macro because it is safe.
| --------- ^^^^^^^^^^^^^^ explicit target is redundant
| |
| because label contains path that resolves to same destination
|
= note: when a link's destination is not specified,
the label is used to resolve intra-doc links
= note: `-D rustdoc::redundant-explicit-links` implied by `-D warnings`
help: remove explicit link target
|
85 | /// [`current`] macro because it is safe.
In order to avoid the warning in the compiler upgrade commit,
make it an intra-doc link as the tool suggests.
Link: https://github.com/rust-lang/rust/pull/113167 [1]
Reviewed-by: Finn Behrens <me@kloenk.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Link: https://lore.kernel.org/r/20231005210556.466856-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae6df65dab upstream.
This is the third upgrade to the Rust toolchain, from 1.71.1 to 1.72.1
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da0 ("rust: upgrade to Rust 1.68.2").
# Unstable features
No unstable features (that we use) were stabilized.
Therefore, the only unstable feature allowed to be used outside
the `kernel` crate is still `new_uninit`, though other code to be
upstreamed may increase the list.
Please see [3] for details.
# Other improvements
Previously, the compiler could incorrectly generate a `.eh_frame`
section under `-Cpanic=abort`. We were hitting this bug when debug
assertions were enabled (`CONFIG_RUST_DEBUG_ASSERTIONS=y`) [4]:
LD .tmp_vmlinux.kallsyms1
ld.lld: error: <internal>:(.eh_frame) is being placed in '.eh_frame'
Gary fixed the issue in Rust 1.72.0 [5].
# Required changes
For the upgrade, the following changes are required:
- A call to `Box::from_raw` in `rust/kernel/sync/arc.rs` now requires
an explicit `drop()` call. See previous patch for details.
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1721-2023-09-19 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [3]
Closes: https://github.com/Rust-for-Linux/linux/issues/1012 [4]
Link: https://github.com/rust-lang/rust/pull/112403 [5]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Link: https://lore.kernel.org/r/20230823160244.188033-3-ojeda@kernel.org
[ Used 1.72.1 instead of .0 (no changes in `alloc`) and reworded
to mention that we hit the `.eh_frame` bug under debug assertions. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 828176d037 upstream.
`Box::from_raw()` is `#[must_use]`, which means the result cannot
go unused.
In Rust 1.71.0, this was not detected because the block expression
swallows the diagnostic [1]:
unsafe { Box::from_raw(self.ptr.as_ptr()) };
It would have been detected, however, if the line had been instead:
unsafe { Box::from_raw(self.ptr.as_ptr()); }
i.e. the semicolon being inside the `unsafe` block, rather than
outside.
In Rust 1.72.0, the compiler started warning about this [2], so
without this patch we will get:
error: unused return value of `alloc::boxed::Box::<T>::from_raw` that must be used
--> rust/kernel/sync/arc.rs:302:22
|
302 | unsafe { Box::from_raw(self.ptr.as_ptr()) };
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: call `drop(Box::from_raw(ptr))` if you intend to drop the `Box`
= note: `-D unused-must-use` implied by `-D warnings`
help: use `let _ = ...` to ignore the resulting value
|
302 | unsafe { let _ = Box::from_raw(self.ptr.as_ptr()); };
| +++++++ +
Thus add an add an explicit `drop()` as the `#[must_use]`'s
annotation suggests (instead of the more general help line).
Link: https://github.com/rust-lang/rust/issues/104253 [1]
Link: https://github.com/rust-lang/rust/pull/112529 [2]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Link: https://lore.kernel.org/r/20230823160244.188033-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6aac002bcf ]
After the interface selection policy change to do a weighted
round robin, each iface maintains a weight_fulfilled. When the
weight_fulfilled reaches the total weight for the iface, we know
that the weights can be reset and ifaces can be allocated from
scratch again.
During channel allocation failures on a particular channel,
weight_fulfilled is not incremented. If a few interfaces are
inactive, we could end up in a situation where the active
interfaces are all allocated for the total_weight, and inactive
ones are all that remain. This can cause a situation where
no more channels can be allocated further.
This change fixes it by increasing weight_fulfilled, even when
channel allocation failure happens. This could mean that if
there are temporary failures in channel allocation, the iface
weights may not strictly be adhered to. But that's still okay.
Fixes: a6d8fb54a5 ("cifs: distribute channels across interfaces based on speed")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e77e15fa5e ]
When the server reports query network interface info call
as unsupported following a tree connect, it means that
multichannel is unsupported, even if the server capabilities
report otherwise.
When this happens, cifs_chan_skip_or_disable is called to
disable multichannel on the client. However, we only need
to call this when multichannel is currently setup.
Fixes: f591062bdb ("cifs: handle servers that still advertise multichannel after disabling")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7104ba0f19 ]
If the external phy working together with phy-omap-usb2 does not implement
send_srp(), we may still attempt to call it. This can happen on an idle
Ethernet gadget triggering a wakeup for example:
configfs-gadget.g1 gadget.0: ECM Suspend
configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup
...
Unable to handle kernel NULL pointer dereference at virtual address
00000000 when execute
...
PC is at 0x0
LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc]
...
musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core]
usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether]
eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c
dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4
sch_direct_xmit from __dev_queue_xmit+0x334/0xd88
__dev_queue_xmit from arp_solicit+0xf0/0x268
arp_solicit from neigh_probe+0x54/0x7c
neigh_probe from __neigh_event_send+0x22c/0x47c
__neigh_event_send from neigh_resolve_output+0x14c/0x1c0
neigh_resolve_output from ip_finish_output2+0x1c8/0x628
ip_finish_output2 from ip_send_skb+0x40/0xd8
ip_send_skb from udp_send_skb+0x124/0x340
udp_send_skb from udp_sendmsg+0x780/0x984
udp_sendmsg from __sys_sendto+0xd8/0x158
__sys_sendto from ret_fast_syscall+0x0/0x58
Let's fix the issue by checking for send_srp() and set_vbus() before
calling them. For USB peripheral only cases these both could be NULL.
Fixes: 657b306a7b ("usb: phy: add a new driver for omap usb2 phy")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240128120556.8848-1-tony@atomide.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a22fe1d6de ]
is_slave_direction() should return true when direction is DMA_DEV_TO_DEV.
Fixes: 49920bc669 ("dmaengine: add new enum dma_transfer_direction")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240123172842.3764529-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7814fe24a6 ]
The 'Session topology' test currently fails with this message when
evlist__new_default() opens more than one event:
32: Session topology :
--- start ---
templ file: /tmp/perf-test-vv5YzZ
Using CPUID 0x00000000410fd070
Opening: unknown-hardware:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xb00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 4
Opening: unknown-hardware:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 5
non matching sample_type
FAILED tests/topology.c:73 can't get session
---- end ----
Session topology: FAILED!
This is because when re-opening the file and parsing the header, Perf
expects that any file that has more than one event has the sample ID
flag set. Perf record already sets the flag in a similar way when there
is more than one event, so add the same logic to evlist__new_default().
evlist__new_default() is only currently used in tests, so I don't
expect this change to have any other side effects. The other tests that
use it don't save and re-open the file so don't hit this issue.
The session topology test has been failing on Arm big.LITTLE platforms
since commit 251aa04024 ("perf parse-events: Wildcard most
"numeric" events") when evlist__new_default() started opening multiple
events for 'cycles'.
Fixes: 251aa04024 ("perf parse-events: Wildcard most "numeric" events")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
[ This was failing as well on a Rocket Lake Refresh/14700k Intel hybrid system - Arnaldo ]
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Closes: https://lore.kernel.org/lkml/CAP-5=fWVQ-7ijjK3-w1q+k2WYVNHbAcejb-xY0ptbjRw476VKA@mail.gmail.com/
Link: https://lore.kernel.org/r/20240124094358.489372-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3aa58cb513 ]
This dma_alloc_coherent() is undone neither in the remove function, nor in
the error handling path of fsl_qdma_probe().
Switch to the managed version to fix both issues.
Fixes: b092529e0a ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7f66aa14f59d32b13672dde28602b47deb294e1f.1704621515.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 968bc1d720 ]
This dma_alloc_coherent() is undone in the remove function, but not in the
error handling path of fsl_qdma_probe().
Switch to the managed version to fix the issue in the probe and simplify
the remove function.
Fixes: b092529e0a ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/a0ef5d0f5a47381617ef339df776ddc68ce48173.1704621515.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc9847c9ba ]
Propagate the TR response status to the device using BCDMA
split-channels. For example CSI-RX driver should be able to check if a
frame was not transferred completely (short packet) and needs to be
discarded.
Fixes: 25dcb5dd7b ("dmaengine: ti: New driver for K3 UDMA")
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240103-tr_resp_err-v1-1-2fdf6d48ab92@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b73e43dcd7 ]
In case of long format of qDMA command descriptor, there are one frame
descriptor, three entries in the frame list and two data entries. So the
size of dma_pool_create for these three fields should be the same with
the total size of entries respectively, or the contents may be overwritten
by the next allocated descriptor.
Fixes: 7fdf9b05c7 ("dmaengine: fsl-dpaa2-qdma: Add NXP dpaa2 qDMA controller driver for Layerscape SoCs")
Signed-off-by: Guanhua Gao <guanhua.gao@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240118162917.2951450-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9b528c357 ]
This mostly reverts commit 6bd97bf273 ("ext4: remove redundant
mb_regenerate_buddy()") and reintroduces mb_regenerate_buddy(). Based on
code in mb_free_blocks(), fast commit replay can end up marking as free
blocks that are already marked as such. This causes corruption of the
buddy bitmap so we need to regenerate it in that case.
Reported-by: Jan Kara <jack@suse.cz>
Fixes: 6bd97bf273 ("ext4: remove redundant mb_regenerate_buddy()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9407ff118 ]
The PCIe reset handlers can run at the same time as the
health thread. This can cause the health thread to
stomp on the PCIe reset. Fix this by preventing the
health thread from running while a PCIe reset is happening.
As part of this use timer_shutdown_sync() during reset and
remove to make sure the timer doesn't ever get rearmed.
Fixes: ffa5585833 ("pds_core: implement pci reset handlers")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-2-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b53cc6144a upstream.
The PA gain can be set in steps of 1.5 dB from -3 dB to 18 dB, that is,
in 15 levels.
Fix the dB values for the PA volume control as experiments using wsa8835
show that the first 16 levels all map to the same lowest gain while the
last three map to the highest gain.
These values specifically need to be correct for the sound server to
provide proper volume control.
Note that level 0 (-3 dB) does not mute the PA so the mute flag should
also not be set.
Fixes: cdb09e6231 ("ASoC: codecs: wsa883x: add control, dapm widgets and map")
Cc: stable@vger.kernel.org # 6.0
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240119112420.7446-2-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46188db080 upstream.
The LPASS WSA macro codec driver is updating the digital gain settings
behind the back of user space on DAPM events if companding has been
enabled.
As compander control is exported to user space, this can result in the
digital gain setting being incremented (or decremented) every time the
sound server is started and the codec suspended depending on what the
UCM configuration looks like.
Soon enough playback will become distorted (or too quiet).
This is specifically a problem on the Lenovo ThinkPad X13s as this
bypasses the limit for the digital gain setting that has been set by the
machine driver.
Fix this by simply dropping the compander gain offset hack. If someone
cares about modelling the impact of the compander setting this can
possibly be done by exporting it as a volume control later.
Note that the volume registers still need to be written after enabling
clocks in order for any prior updates to take effect.
Fixes: 2c4066e5d4 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route")
Cc: stable@vger.kernel.org # 5.11
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240119112420.7446-4-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d0e8bdfa4 upstream.
The lowest headphones volume setting does not mute so the leave the TLV
mute flag unset.
This is specifically needed to let the sound server use the lowest gain
setting.
Fixes: c03226ba15 ("ASoC: codecs: wcd938x: fix dB range for HPHL and HPHR")
Cc: <stable@vger.kernel.org> # 6.5
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240122091130.27463-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c481016bb4 upstream.
The UCM configuration for the Lenovo ThinkPad X13s has up until now
been setting the speaker PA volume to the minimum -3 dB when enabling
the speakers, but this does not prevent the user from increasing the
volume further.
Limit the digital gain and PA volumes to a combined -3 dB in the machine
driver to reduce the risk of speaker damage until we have active speaker
protection in place (or higher safe levels have been established).
Note that the PA volume limit cannot be set lower than 0 dB or
PulseAudio gets confused when the first 16 levels all map to -3 dB.
Also note that this will probably need to be generalised using
machine-specific limits, but a common limit should do for now.
Cc: <stable@vger.kernel.org> # 6.5
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240122181819.4038-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 486058f42a upstream.
As suggested by Paolo in link[1], if the memory allocation fails, the mm
layer will emit a lot warning comprising the backtrace, so remove the
print.
[1] https://lore.kernel.org/all/20231118081653.1481260-1-shaozhengchao@huawei.com/
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56925f389e upstream.
With previous patch, one of subtests in test_btf_id becomes
flaky and may fail. The following is a failing example:
Error: #26 btf
Error: #26/174 btf/BTF ID
Error: #26/174 btf/BTF ID
btf_raw_create:PASS:check 0 nsec
btf_raw_create:PASS:check 0 nsec
test_btf_id:PASS:check 0 nsec
...
test_btf_id:PASS:check 0 nsec
test_btf_id:FAIL:check BTF lingersdo_test_get_info:FAIL:check failed: -1
The test tries to prove a btf_id not available after the map is closed.
But btf_id is freed only after workqueue and a rcu grace period, compared
to previous case just after a rcu grade period.
Depending on system workload, workqueue could take quite some time
to execute function bpf_map_free_deferred() which may cause the test failure.
Instead of adding arbitrary delays, let us remove the logic to
check btf_id availability after map is closed.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231214203820.1469402-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5056c596c3 upstream.
Machines which have more than 8 nodes fail to boot SMP after commit
a2ccf46333 ("LoongArch/smp: Call rcutree_report_cpu_starting()
earlier"). Because such machines use tlb-based per-cpu base address
rather than dmw-based per-cpu base address, resulting per-cpu variables
can only be accessed after tlb_init(). But rcutree_report_cpu_starting()
is now called before tlb_init() and accesses per-cpu variables indeed.
Since the original patch want to avoid the lockdep warning caused by
page allocation in tlb_init(), we can move rcutree_report_cpu_starting()
to tlb_init() where after tlb exception configuration but before page
allocation.
Fixes: a2ccf46333 ("LoongArch/smp: Call rcutree_report_cpu_starting() earlier")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ab502bc1c upstream.
Some devices power the DSI PHY/PLL through a power rail that we model
as a GENPD. Enable runtime PM to make it suspendable.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543352/
Link: https://lore.kernel.org/r/20230620-topic-dsiphy_rpm-v2-2-a11a751f34f0@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 107a11637f.
duplicated a change made in 6.6.8
a8f922ad2f
Cc: stable@vger.kernel.org # 6.6
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6564fce25 upstream.
Alexander Potapenko writes in [1]: "For every memory access in the code
instrumented by KMSAN we call kmsan_get_metadata() to obtain the metadata
for the memory being accessed. For virtual memory the metadata pointers
are stored in the corresponding `struct page`, therefore we need to call
virt_to_page() to get them.
According to the comment in arch/x86/include/asm/page.h,
virt_to_page(kaddr) returns a valid pointer iff virt_addr_valid(kaddr) is
true, so KMSAN needs to call virt_addr_valid() as well.
To avoid recursion, kmsan_get_metadata() must not call instrumented code,
therefore ./arch/x86/include/asm/kmsan.h forks parts of
arch/x86/mm/physaddr.c to check whether a virtual address is valid or not.
But the introduction of rcu_read_lock() to pfn_valid() added instrumented
RCU API calls to virt_to_page_or_null(), which is called by
kmsan_get_metadata(), so there is an infinite recursion now. I do not
think it is correct to stop that recursion by doing
kmsan_enter_runtime()/kmsan_exit_runtime() in kmsan_get_metadata(): that
would prevent instrumented functions called from within the runtime from
tracking the shadow values, which might introduce false positives."
Fix the issue by switching pfn_valid() to the _sched() variant of
rcu_read_lock/unlock(), which does not require calling into RCU. Given
the critical section in pfn_valid() is very small, this is a reasonable
trade-off (with preemptible RCU).
KMSAN further needs to be careful to suppress calls into the scheduler,
which would be another source of recursion. This can be done by wrapping
the call to pfn_valid() into preempt_disable/enable_no_resched(). The
downside is that this sacrifices breaking scheduling guarantees; however,
a kernel compiled with KMSAN has already given up any performance
guarantees due to being heavily instrumented.
Note, KMSAN code already disables tracing via Makefile, and since mmzone.h
is included, it is not necessary to use the notrace variant, which is
generally preferred in all other cases.
Link: https://lkml.kernel.org/r/20240115184430.2710652-1-glider@google.com [1]
Link: https://lkml.kernel.org/r/20240118110022.2538350-1-elver@google.com
Fixes: 5ec8e8ea8b ("mm/sparsemem: fix race in accessing memory_section->usage")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: syzbot+93a9e8a3dea8d6085e12@syzkaller.appspotmail.com
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8cc063ae1b ]
The purpose of the test_LAG_cleanup() function is to check that some
hardware addresses are removed from underlying devices after they have been
unenslaved. The test function simply checks that those addresses are not
present at the end. However, if the addresses were never added to begin
with due to some error in device setup, the test function currently passes.
This is a false positive since in that situation the test did not actually
exercise the intended functionality.
Add a check that the expected addresses are indeed present after device
setup. This makes the test function more robust.
I noticed this problem when running the team/dev_addr_lists.sh test on a
system without support for dummy and ipv6:
tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh
Error: Unknown device type.
Error: Unknown device type.
This program is not intended to be run as root.
RTNETLINK answers: Operation not supported
TEST: team cleanup mode lacp [ OK ]
Fixes: bbb774d921 ("net: Add tests for bonding and team address list management")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-3-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b6fb3050d ]
Similar to commit dd2d40acdb ("selftests: bonding: Add more missing
config options"), add more networking-specific config options which are
needed for team device tests.
For testing, I used the minimal config generated by virtme-ng and I added
the options in the config file. Afterwards, the team device test passed.
Fixes: bbb774d921 ("net: Add tests for bonding and team address list management")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-2-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae3f4b4464 ]
The documentation is pointing to the wrong path for the interface.
Documentation is pointing to /sys/class/<iface>, instead of
/sys/class/net/<iface>.
Fix it by adding the `net/` directory before the interface.
Fixes: 1a02ef76ac ("net: sysfs: add documentation entries for /sys/class/<iface>/queues")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240131102150.728960-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
