Per Documentation/process/license-rules.rst, the SPDX MIT identifier is
equivalent to including the entire MIT license text from
LICENSES/preferred/MIT.
Replace the MIT license text with the equivalent SPDX identifier.
Link: https://lore.kernel.org/r/20220224224753.297579-12-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In struct vga_device, io_lock_cnt and mem_lock_cnt are unsigned, but we
previously printed them with "%d", the signed decimal format. Print them
with the unsigned format "%u" instead.
Link: https://lore.kernel.org/r/20220224224753.297579-11-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously vga_arb_device_init() iterated through all VGA devices and
indicated whether legacy VGA routing to each could be controlled by an
upstream bridge.
But we determine that information in vga_arbiter_add_pci_device(), which we
call for every device, so we can log it there without iterating through the
VGA devices again.
Note that we call vga_arbiter_check_bridge_sharing() before adding the
device to vga_list, so we have to handle the very first device separately.
Link: https://lore.kernel.org/r/20220224224753.297579-10-helgaas@kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
a37c0f4895 ("vgaarb: Select a default VGA device even if there's no
legacy VGA") extended the vga_arb_device_init() subsys_initcall so that if
there are no other eligible devices, it could select a disabled VGA device
as the default.
Move this detection from vga_arb_select_default_device() to
vga_arbiter_add_pci_device() so every device, even those hot-added or
enumerated after vga_arb_device_init() is eligible for selection as the
default VGA device.
[bhelgaas: commit log, restructure]
Link: https://lore.kernel.org/r/20211015061512.2941859-5-chenhuacai@loongson.cn
Link: https://lore.kernel.org/r/20220224224753.297579-8-helgaas@kernel.org
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
a37c0f4895 ("vgaarb: Select a default VGA device even if there's no
legacy VGA") extended the vga_arb_device_init() subsys_initcall so it could
select a non-legacy VGA device as the default.
That failed to consider that PCI devices may be enumerated after
vga_arb_device_init(), e.g., hot-added devices or non-ACPI systems that do
PCI enumeration in pcibios_init(). Devices found then could never be
selected as the default.
One system where this is a problem is the MIPS-based Loongson where an
ASpeed AST2500 VGA device is behind a bridge that doesn't implement the VGA
Enable bit, so legacy resources are not routed to the VGA device. [1]
Fix this by moving the non-legacy VGA device selection from
vga_arb_select_default_device() to vga_arbiter_add_pci_device(), which is
called after every PCI device is enumerated, either by the
vga_arb_device_init() subsys_initcall or as an ADD_DEVICE notifier.
[1] https://lore.kernel.org/r/20210514080025.1828197-6-chenhuacai@loongson.cn
[bhelgaas: commit log, restructure]
Link: https://lore.kernel.org/r/20211015061512.2941859-5-chenhuacai@loongson.cn
Link: https://lore.kernel.org/r/20211015061512.2941859-7-chenhuacai@loongson.cn
Link: https://lore.kernel.org/r/20220224224753.297579-7-helgaas@kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Previously we selected the firmware default device, i.e., one that owns the
boot framebuffer, as the default device in vga_arb_select_default_device().
This was only done in the vga_arb_device_init() subsys_initcall, so devices
enumerated later, e.g., by pcibios_init(), were not eligible.
Fix this by moving the firmware default device selection from
vga_arb_select_default_device() to vga_arbiter_add_pci_device(), which is
called after every PCI device is enumerated, either by the
vga_arb_device_init() subsys_initcall or as an ADD_DEVICE notifier.
Note that if vga_arb_select_default_device() previously found a device
owning the boot framebuffer, it unconditionally set it to be the default
VGA device, and no subsequent device could replace it.
[bhelgaas: commit log, restructure slightly]
Link: https://lore.kernel.org/r/20211015061512.2941859-7-chenhuacai@loongson.cn
Link: https://lore.kernel.org/r/20220224224753.297579-6-helgaas@kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bruno Prémont <bonbons@linux-vserver.org>
Default VGA device selection fails when PCI devices are enumerated after
the vga_arb_device_init() subsys_initcall.
vga_arbiter_add_pci_device() selects the first fully enabled device to
which legacy VGA resources are routed as the default VGA device. This is
an ADD_DEVICE notifier, so it runs after every PCI device is enumerated.
vga_arb_select_default_device() may select framebuffer devices, partially
enabled GPUs, or non-legacy devices that don't have legacy VGA resources
routed to them as the default VGA device. But this only happens once, from
the vga_arb_device_init() subsys_initcall, so it doesn't consider devices
enumerated after that:
acpi_init
acpi_scan_init
acpi_pci_root_init # PCI device enumeration (ACPI systems)
vga_arb_device_init
for_each_pci_device
vga_arbiter_add_pci_device # ADD_DEVICE notifier
if (VGA-owner)
vga_set_default_device <-- set default VGA
vga_arb_select_default_device # only called ONCE
for_each_vga_device
if (framebuffer)
vga_set_default_device <-- set default VGA to framebuffer
if (!vga_default_device())
if (non-legacy, integrated GPU, etc)
vga_set_default_device <-- set default VGA
if (!vga_default_device())
vga_set_default_device <-- set default VGA
pcibios_init
pcibios_scanbus # PCI device enumeration (non-ACPI systems)
...
vga_arbiter_add_pci_device # ADD_DEVICE notification
if (VGA-owner)
vga_set_default_device <-- set default VGA
Note that on non-ACPI systems, vga_arb_select_default_device() runs before
pcibios_init(), so it sees no VGA devices and can never set a framebuffer
device, a non-legacy integrated GPU, etc., as the default device.
Factor out the default VGA device selection to vga_is_boot_device(), called
from vga_arbiter_add_pci_device().
Then we can migrate the default device selection from
vga_arb_select_default_device() to the vga_arbiter_add_pci_device() path.
[bhelgaas: commit log, split to separate patch]
Link: https://lore.kernel.org/r/20211015061512.2941859-4-chenhuacai@loongson.cn
Link: https://lore.kernel.org/r/20220224224753.297579-5-helgaas@kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
On x86 and ia64, if a VGA device BARs include a framebuffer reported by
platform firmware, we select the device as the default VGA device. Factor
this code to a separate function. No functional change intended.
Link: https://lore.kernel.org/r/20220224224753.297579-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bruno Prémont <bonbons@linux-vserver.org>
The VGA arbiter is really PCI-specific and doesn't depend on any GPU
things. Move it to the PCI subsystem.
Note that misc_init() must be called before vga_arb_device_init(). These
are both subsys_initcalls, so this ordering depends on the link order,
which is determined by drivers/Makefile:
obj-y += pci/
obj-y += char/ <-- misc_init()
obj-y += gpu/ <-- vga_arb_device_init() (before this commit)
The drivers/pci/ subsys_initcalls are called *before* misc_init(), so
convert vga_arb_device_init() to subsys_initcall_sync(), which is called
after *all* subsys_initcalls.
Link: https://lore.kernel.org/r/20220224224753.297579-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
