Commit graph

1237 commits

Author SHA1 Message Date
Linus Torvalds
c9059598ea Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
  block: add request clone interface (v2)
  floppy: fix hibernation
  ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
  fs/bio.c: add missing __user annotation
  block: prevent possible io_context->refcount overflow
  Add serial number support for virtio_blk, V4a
  block: Add missing bounce_pfn stacking and fix comments
  Revert "block: Fix bounce limit setting in DM"
  cciss: decode unit attention in SCSI error handling code
  cciss: Remove no longer needed sendcmd reject processing code
  cciss: change SCSI error handling routines to work with interrupts enabled.
  cciss: separate error processing and command retrying code in sendcmd_withirq_core()
  cciss: factor out fix target status processing code from sendcmd functions
  cciss: simplify interface of sendcmd() and sendcmd_withirq()
  cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
  cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
  block: needs to set the residual length of a bidi request
  Revert "block: implement blkdev_readpages"
  block: Fix bounce limit setting in DM
  Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
  ...

Manually fix conflicts with tracing updates in:
	block/blk-sysfs.c
	drivers/ide/ide-atapi.c
	drivers/ide/ide-cd.c
	drivers/ide/ide-floppy.c
	drivers/ide/ide-tape.c
	include/trace/events/block.h
	kernel/trace/blktrace.c
2009-06-11 11:10:35 -07:00
Linus Torvalds
8623661180 Merge branch 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (244 commits)
  Revert "x86, bts: reenable ptrace branch trace support"
  tracing: do not translate event helper macros in print format
  ftrace/documentation: fix typo in function grapher name
  tracing/events: convert block trace points to TRACE_EVENT(), fix !CONFIG_BLOCK
  tracing: add protection around module events unload
  tracing: add trace_seq_vprint interface
  tracing: fix the block trace points print size
  tracing/events: convert block trace points to TRACE_EVENT()
  ring-buffer: fix ret in rb_add_time_stamp
  ring-buffer: pass in lockdep class key for reader_lock
  tracing: add annotation to what type of stack trace is recorded
  tracing: fix multiple use of __print_flags and __print_symbolic
  tracing/events: fix output format of user stack
  tracing/events: fix output format of kernel stack
  tracing/trace_stack: fix the number of entries in the header
  ring-buffer: discard timestamps that are at the start of the buffer
  ring-buffer: try to discard unneeded timestamps
  ring-buffer: fix bug in ring_buffer_discard_commit
  ftrace: do not profile functions when disabled
  tracing: make trace pipe recognize latency format flag
  ...
2009-06-10 19:53:40 -07:00
Li Zefan
55782138e4 tracing/events: convert block trace points to TRACE_EVENT()
TRACE_EVENT is a more generic way to define tracepoints. Doing so adds
these new capabilities to this tracepoint:

  - zero-copy and per-cpu splice() tracing
  - binary tracing without printf overhead
  - structured logging records exposed under /debug/tracing/events
  - trace events embedded in function tracer output and other plugins
  - user-defined, per tracepoint filter expressions
  ...

Cons:

  - no dev_t info for the output of plug, unplug_timer and unplug_io events.
    no dev_t info for getrq and sleeprq events if bio == NULL.
    no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL.

    This is mainly because we can't get the deivce from a request queue.
    But this may change in the future.

  - A packet command is converted to a string in TP_assign, not TP_print.
    While blktrace do the convertion just before output.

    Since pc requests should be rather rare, this is not a big issue.

  - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT
    has a unique format, which means we have some unused data in a trace entry.

    The overhead is minimized by using __dynamic_array() instead of __array().

I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing:

      dd                   dd + ioctl blktrace       dd + TRACE_EVENT (splice)
1     7.36s, 42.7 MB/s     7.50s, 42.0 MB/s          7.41s, 42.5 MB/s
2     7.43s, 42.3 MB/s     7.48s, 42.1 MB/s          7.43s, 42.4 MB/s
3     7.38s, 42.6 MB/s     7.45s, 42.2 MB/s          7.41s, 42.5 MB/s

So the overhead of tracing is very small, and no regression when using
those trace events vs blktrace.

And the binary output of TRACE_EVENT is much smaller than blktrace:

 # ls -l -h
 -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0
 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1
 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out

Following are some comparisons between TRACE_EVENT and blktrace:

plug:
  kjournald-480   [000]   303.084981: block_plug: [kjournald]
  kjournald-480   [000]   303.084981:   8,0    P   N [kjournald]

unplug_io:
  kblockd/0-118   [000]   300.052973: block_unplug_io: [kblockd/0] 1
  kblockd/0-118   [000]   300.052974:   8,0    U   N [kblockd/0] 1

remap:
  kjournald-480   [000]   303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384
  kjournald-480   [000]   303.085043:   8,0    A   W 102736992 + 8 <- (8,8) 33384

bio_backmerge:
  kjournald-480   [000]   303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald]
  kjournald-480   [000]   303.085086:   8,0    M   W 102737032 + 8 [kjournald]

getrq:
  kjournald-480   [000]   303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084975:   8,0    G   W 102736984 + 8 [kjournald]

  bash-2066  [001]  1072.953770:   8,0    G   N [bash]
  bash-2066  [001]  1072.953773: block_getrq: 0,0 N 0 + 0 [bash]

rq_complete:
  konsole-2065  [001]   300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0]
  konsole-2065  [001]   300.053191:   8,0    C   W 103669040 + 16 [0]

  ksoftirqd/1-7   [001]  1072.953811:   8,0    C   N (5a 00 08 00 00 00 00 00 24 00) [0]
  ksoftirqd/1-7   [001]  1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0]

rq_insert:
  kjournald-480   [000]   303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084986:   8,0    I   W 102736984 + 8 [kjournald]

Changelog from v2 -> v3:

- use the newly introduced __dynamic_array().

Changelog from v1 -> v2:

- use __string() instead of __array() to minimize the memory required
  to store hex dump of rq->cmd().

- support large pc requests.

- add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT.

- some cleanups.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 12:34:23 -04:00
NeilBrown
0e6e0271a2 md/raid5: fix bug in reshape code when chunk_size decreases.
Now that we support changing the chunksize, we calculate
"reshape_sectors" to be the max of number of sectors in old
and new chunk size.
However there is one please where we still use 'chunksize'
rather than 'reshape_sectors'.
This causes a reshape that reduces the size of chunks to freeze.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-09 16:32:22 +10:00
NeilBrown
a8c906ca3f md/raid5 - avoid deadlocks in get_active_stripe during reshape
md has functionality to 'quiesce' and array so that all pending
IO completed and no new IO starts.  This is used to achieve a
stable state before making internal changes.

Currently this quiescing applies equally to normal IO, resync
IO, and reshape IO.
However there is a problem with applying it to reshape IO.
Reshape can have multiple 'stripe_heads' that must be active together.
If the quiesce come between allocating the first and the last of
such a collection, then we deadlock, as the last will not be allocated
until the quiesce is lifted, the quiesce will not be lifted until the
first (which has been allocated) gets used, and that first cannot be
used until the last is allocated.

It is not necessary to inhibit reshape IO when a quiesce is
requested.  Those places in the code that require a full quiesce will
ensure the reshape thread is not running at all.

So allow reshape requests to get access to new stripe_heads without
being blocked by a 'quiesce'.

This only affects in-place reshapes (i.e. where the array does not
grow or shrink) and these are only newly supported.  So this patch is
not needed in earlier kernels.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-09 14:39:59 +10:00
NeilBrown
f001a70cdc md/raid5: use conf->raid_disks in preference to mddev->raid_disk
mddev->raid_disks can be changed and any time by a request from
user-space.  It is a suggestion as to what number of raid_disks is
desired.

conf->raid_disks can only be changed by the raid5 module with suitable
locks in place.  It is a statement as to the current number of
raid_disks.

There are two places where the latter should be used, but the former
is used.  This can lead to a crash when reshaping an array.

This patch changes to mddev-> to conf->

Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-09 14:30:31 +10:00
Jens Axboe
9df1bb9b51 Revert "block: Fix bounce limit setting in DM"
This reverts commit a05c0205ba.

DM doesn't need to access the bounce_pfn directly.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09 06:22:57 +02:00
Martin K. Petersen
a05c0205ba block: Fix bounce limit setting in DM
blk_queue_bounce_limit() is more than a wrapper about the request queue
limits.bounce_pfn variable.  Introduce blk_queue_bounce_pfn() which can
be called by stacking drivers that wish to set the bounce limit
explicitly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-03 09:33:18 +02:00
NeilBrown
ed37d83e6a md: raid5: change incorrect usage of 'min' macro to 'min_t'
A recent patch to raid5.c use min on an int and a sector_t.
This isn't allowed.
So change it to min_t(sector_t,x,y).

Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-27 21:39:05 +10:00
NeilBrown
b492b852cd md: don't use locked_ioctl.
md has no need for the BKL - it does its own locking.
So md_ioctl doesn't need to be a locked_ioctl.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-26 12:57:36 +10:00
NeilBrown
7a91ee1f62 md: don't update curr_resync_completed without also updating reshape_position.
In order for the metadata to always be consistent, we mustn't updated
curr_resync_completed without also updating reshape_position.

The reshape code updates both at the same time.  However since
commit 97e4f42d62
the common md_do_sync will sometimes update curr_resync_completed
but is not in a position to update reshape_position.
So if MD_RECOVERY_RESHAPE is set (indicating that a reshape is
happening, so reshape_position might change), don't update
curr_resync_completed in md_do_sync, leave it to the per-personality
reshape code.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-26 12:57:21 +10:00
NeilBrown
848b318236 md: raid5: avoid sector values going negative when testing reshape progress.
As sector_t in unsigned, we cannot afford to let 'safepos' etc go
negative.
So replace
   a -= b;
by
   a -= min(b,a);

Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-26 12:41:08 +10:00
NeilBrown
b6a9ce688f md: export 'frozen' resync state through sysfs
The md resync engine has a 'frozen' state which ensures that
no resync/recovery.  This is used to avoid races.

Export this state through the 'sync_action' sysfs attribute
so that user-space can benefit and also avoid some races.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-26 09:41:17 +10:00
NeilBrown
be51269103 md: bitmap: improve bitmap maintenance code.
The code for checking which bits in the bitmap can be cleared
has 2 problems:
 1/ it repeatedly takes and drops a spinlock, where it would make
    more sense to just hold on to it most of the time.
 2/ it doesn't make use of some opportunities to skip large sections
    of the bitmap

This patch fixes those.  It will only affect CPU consumption, not
correctness.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-26 09:41:17 +10:00
NeilBrown
2b69c83924 md: improve errno return when setting array_size
Instead of always returns EINVAL if anything goes wrong
when setting the array size, add the option of
  E2BIG
if the size requested is too large.  This makes it easier
for user-space to be sure what went wrong.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-26 09:41:17 +10:00
NeilBrown
62e1e389f8 md: always update level / chunk_size / layout when writing v1.x metadata.
We previously didn't update these fields when writing the metadata
because they could never change.  They can now, so we better write
them.
v0.90 metadata always updated these fields.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-26 09:40:59 +10:00
Martin K. Petersen
ae03bf639a block: Use accessor functions for queue limits
Convert all external users of queue limits to using wrapper functions
instead of poking the request queue variables directly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:54 +02:00
Martin K. Petersen
e1defc4ff0 block: Do away with the notion of hardsect_size
Until now we have had a 1:1 mapping between storage device physical
block size and the logical block sized used when addressing the device.
With SATA 4KB drives coming out that will no longer be the case.  The
sector size will be 4KB but the logical block size will remain
512-bytes.  Hence we need to distinguish between the physical block size
and the logical ditto.

This patch renames hardsect_size to logical_block_size.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:54 +02:00
Ingo Molnar
1079cac0f4 Merge commit 'v2.6.30-rc6' into tracing/core
Merge reason: we were on an -rc4 base, sync up to -rc6

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18 10:15:35 +02:00
Ingo Molnar
44347d947f Merge branch 'linus' into tracing/core
Merge reason: tracing/core was on a .30-rc1 base and was missing out on
              on a handful of tracing fixes present in .30-rc5-almost.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-07 11:17:34 +02:00
NeilBrown
c4647292fd md: remove rd%d links immediately after stopping an array.
md maintains link in sys/mdXX/md/ to identify which device has
which role in the array. e.g.
   rd2 -> dev-sda

indicates that the device with role '2' in the array is sda.

These links are only present when the array is active.  They are
created immediately after ->run is called, and so should be removed
immediately after ->stop is called.
However they are currently removed a little bit later, and it is
possible for ->run to be called again, thus adding these links, before
they are removed.

So move the removal earlier so they are consistently only present when
the array is active.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07 12:51:06 +10:00
NeilBrown
5bf2959754 md: remove ability to explicit set an inactive array to 'clean'.
Being able to write 'clean' to an 'array_state' of an inactive array
to activate it in 'clean' mode is both unnecessary and inconvenient.

It is unnecessary because the same can be achieved by writing
'active'.  This activates and array, but it still remains 'clean'
until the first write.

It is inconvenient because writing 'clean' is more often used to
cause an 'active' array to revert to 'clean' mode (thus blocking
any writes until a 'write-pending' is promoted to 'active').

Allowing 'clean' to both activate an array and mark an active array as
clean can lead to races:  One program writes 'clean' to mark the
active array as clean at the same time as another program writes
'inactive' to deactivate (stop) and active array.  Depending on which
writes first, the array could be deactivated and immediately
reactivated which isn't what was desired.

So just disable the use of 'clean' to activate an array.

This avoids a race that can be triggered with mdadm-3.0 and external
metadata, so it suitable for -stable.

Reported-by: Rafal Marszewski <rafal.marszewski@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07 12:50:57 +10:00
Jan Engelhardt
110518bccf md: constify VFTs
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07 12:49:37 +10:00
NeilBrown
dd71cf6b27 md: tidy up status_resync to handle large arrays.
Two problems in status_resync.
1/ It still used Kilobytes as the basic block unit, while most code
   now uses sectors uniformly.
2/ It doesn't allow for the possibility that max_sectors exceeds
   the range of "unsigned long".

So
 - change "max_blocks" to "max_sectors", and store sector numbers
   in there and in 'resync'
 - Make 'rt' a 'sector_t' so it can temporarily hold the number of
   remaining sectors.
 - use sector_div rather than normal division.
 - change the magic '100' used to preserve precision to '32'.
   + making it a power of 2 makes division easier
   + it doesn't need to be as large as it was chosen when we averaged
     speed over the entire run.  Now we average speed over the last 30
     seconds or so.

Reported-by: "Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07 12:49:35 +10:00
NeilBrown
db305e507d md: fix some (more) errors with bitmaps on devices larger than 2TB.
If a write intent bitmap covers more than 2TB, we sometimes work with
values beyond 32bit, so these need to be sector_t.  This patches
add the required casts to some unsigned longs that are being shifted
up.

This will affect any raid10 larger than 2TB, or any raid1/4/5/6 with
member devices that are larger than 2TB.

Signed-off-by: NeilBrown <neilb@suse.de>
Reported-by: "Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE>
Cc: stable@kernel.org
2009-05-07 12:49:06 +10:00
NeilBrown
1805556912 md/raid10: don't clear bitmap during recovery if array will still be degraded.
If we have a raid10 with multiple missing devices, and we recover just
one of these to a spare, then we risk (depending on the bitmap and
array chunk size) clearing bits of the bitmap for which recovery isn't
complete (because a device is still missing).

This can lead to a subsequent "re-add" being recovered without
any IO happening, which would result in loss of data.

This patch takes the safe approach of not clearing bitmap bits
if the array will still be degraded.

This patch is suitable for all active -stable kernels.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07 12:48:10 +10:00
NeilBrown
b74fd2826c md: fix loading of out-of-date bitmap.
When md is loading a bitmap which it knows is out of date, it fills
each page with 1s and writes it back out again.  However the
write_page call makes used of bitmap->file_pages and
bitmap->last_page_size which haven't been set correctly yet.  So this
can sometimes fail.

Move the setting of file_pages and last_page_size to before the call
to write_page.

This bug can cause the assembly on an array to fail, thus making the
data inaccessible.  Hence I think it is a suitable candidate for
-stable.

Cc: stable@kernel.org
Reported-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07 12:47:19 +10:00
Alan D. Brunelle
22a7c31a96 blktrace: from-sector redundant in trace_block_remap
Remove redundant from-sector parameter: it's /always/ the bio's sector
passed in.

[ Impact: cleanup ]

Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <49FF517C.7000503@hp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-06 14:13:01 +02:00
Linus Torvalds
2edbdd1266 Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
  md: support bitmaps on RAID10 arrays larger then 2 terabytes
  md: update sync_completed and reshape_position even more often.
  md: improve usefulness and accuracy of sysfs file md/sync_completed.
  md: allow setting newly added device to 'in_sync' via sysfs.
  md: tiny md.h cleanups
2009-04-20 08:37:37 -07:00
NeilBrown
1f59390339 md: support bitmaps on RAID10 arrays larger then 2 terabytes
.. and other arrays with components larger than 2 terabytes.

We use a "long" rather than a "sector_t" in part of the bitmap
size calculations, which is sad.

Reported-by: "Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-04-20 11:50:24 +10:00
NeilBrown
c03f6a1969 md: update sync_completed and reshape_position even more often.
There are circumstances when a user-space process might need to
"oversee" a resync/reshape process.  For example when doing an
in-place reshape of a raid5, it is prudent to take a backup of each
section before reshaping it as this is the only way to provide
safety against an unplanned shutdown (i.e. crash/power failure).

The sync_max sysfs value can be used to stop the resync from
advancing beyond a particular point.
So user-space can:
  suspend IO to the first section and back it up
  set 'sync_max' to the end of the section
  wait for 'sync_completed' to reach that point
  resume IO on the first section and move on to the next section.

However this process requires the kernel and user-space to run in
lock-step which could introduce unnecessary delays.

It would be better if a 'double buffered' approach could be used with
userspace and kernel space working on different sections with the
'next' section always ready when the 'current' section is finished.

One problem with implementing this is that sync_completed is only
guaranteed to be updated when the sync process reaches sync_max.
(it is updated on a time basis at other times, but it is hard to rely
on that).  This defeats some of the double buffering.

With this patch, sync_completed (and reshape_position) get updated as
the current position approaches sync_max, so there is room for
userspace to advance sync_max early without losing updates.

To be precise, sync_completed is updated when the current sync
position reaches half way between the current value of sync_completed
and the value of sync_max.  This will usually be a good time for user
space to update sync_max.

If sync_max does not get updated, the updates to sync_completed
(together with associated metadata updates) will occur at an
exponentially increasing frequency which will get unreasonably fast
(one update every page) immediately before the process hits sync_max
and stops.  So the update rate will be unreasonably fast only for an
insignificant period of time.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-04-17 11:06:30 +10:00
Christoph Hellwig
8f3d8ba20e block: move bio list helpers into bio.h
It's used by DM and MD and generally useful, so move the bio list
helpers into bio.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:09 +02:00
NeilBrown
acb180b0e3 md: improve usefulness and accuracy of sysfs file md/sync_completed.
The sync_completed file reports how much of a resync (or recovery or
reshape) has been completed.
However due to the possibility of out-of-order completion of writes,
it is not certain to be accurate.

We have an internal value - mddev->curr_resync_completed - which is an
accurate value (though it might not always be quite so uptodate).

So:
 - make curr_resync_completed be uptodate a little more often,
   particularly when raid5 reshape updates status in the metadata
 - report curr_resync_completed in the sysfs file
 - allow poll/select to report all updates to md/sync_completed.

This makes sync_completed completed usable by any external metadata
handler that wants to record this status information in its metadata.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-04-14 16:28:34 +10:00
NeilBrown
6d56e27844 md: allow setting newly added device to 'in_sync' via sysfs.
When adding devices to an active array via sysfs, there is currently
no way to mark a device as 'in-sync' which is useful when
incrementally assembling an array.

So add that option.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-04-14 12:01:57 +10:00
Christoph Hellwig
63fe08177f md: tiny md.h cleanups
- update inclusion guard and make sure it covers the whole file
 - remove superflous #ifdef CONFIG_BLOCK
 - make sure all required headers are included so that new users aren't
   required to include others before

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-04-14 12:01:53 +10:00
Mikulas Patocka
340cd44451 dm kcopyd: fix callback race
If the thread calling dm_kcopyd_copy is delayed due to scheduling inside
split_job/segment_complete and the subjobs complete before the loop in
split_job completes, the kcopyd callback could be invoked from the
thread that called dm_kcopyd_copy instead of the kcopyd workqueue.

dm_kcopyd_copy -> split_job -> segment_complete -> job->fn()

Snapshots depend on the fact that callbacks are called from the singlethreaded
kcopyd workqueue and expect that there is no racing between individual
callbacks. The racing between callbacks can lead to corruption of exception
store and it can also mean that exception store callbacks are called twice
for the same exception - a likely reason for crashes reported inside
pending_complete() / remove_exception().

This patch fixes two problems:

1. job->fn being called from the thread that submitted the job (see above).

- Fix: hand over the completion callback to the kcopyd thread.

2. job->fn(read_err, write_err, job->context); in segment_complete
reports the error of the last subjob, not the union of all errors.

- Fix: pass job->write_err to the callback to report all error bits
  (it is done already in run_complete_job)

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:17 +01:00
Mikulas Patocka
73830857bc dm kcopyd: prepare for callback race fix
Use a variable in segment_complete() to point to the dm_kcopyd_client
struct and only release job->pages in run_complete_job() if any are
defined.  These changes are needed by the next patch.

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:16 +01:00
Mikulas Patocka
af7e466a1a dm: implement basic barrier support
Barriers are submitted to a worker thread that issues them in-order.

The thread is modified so that when it sees a barrier request it waits
for all pending IO before the request then submits the barrier and
waits for it.  (We must wait, otherwise it could be intermixed with
following requests.)

Errors from the barrier request are recorded in a per-device barrier_error
variable. There may be only one barrier request in progress at once.

For now, the barrier request is converted to a non-barrier request when
sending it to the underlying device.

This patch guarantees correct barrier behavior if the underlying device
doesn't perform write-back caching. The same requirement existed before
barriers were supported in dm.

Bottom layer barrier support (sending barriers by target drivers) and
handling devices with write-back caches will be done in further patches.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:16 +01:00
Mikulas Patocka
92c639021c dm: remove dm_request loop
Remove queue_io return value and a loop in dm_request.

IO may be submitted to a worker thread with queue_io().  queue_io() sets
DMF_QUEUE_IO_TO_THREAD so that all further IO is queued for the thread. When
the thread finishes its work, it clears DMF_QUEUE_IO_TO_THREAD and from this
point on, requests are submitted from dm_request again. This will be used
for processing barriers.

Remove the loop in dm_request. queue_io() can submit I/Os to the worker thread
even if DMF_QUEUE_IO_TO_THREAD was not set.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:15 +01:00
Mikulas Patocka
3b00b2036f dm: rework queueing and suspension
Rework shutting down on suspend and document the associated rules.

Drop write lock in __split_and_process_bio to allow more processing
concurrency.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:15 +01:00
Alasdair G Kergon
54d9a1b451 dm: simplify dm_request loop
Refactor the code in dm_request().

Require the new DMF_BLOCK_FOR_SUSPEND flag on readahead bios we will
discard so we don't drop such bios while processing a barrier.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:14 +01:00
Alasdair G Kergon
1eb787ec18 dm: split DMF_BLOCK_IO flag into two
Split the DMF_BLOCK_IO flag into two.

DMF_BLOCK_IO_FOR_SUSPEND is set when I/O must be blocked while suspending a
device.  DMF_QUEUE_IO_TO_THREAD is set when I/O must be queued to a
worker thread for later processing.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:14 +01:00
Alasdair G Kergon
df12ee9963 dm: rearrange dm_wq_work
Refactor dm_wq_work() to make later patch more readable.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:13 +01:00
Mikulas Patocka
692d0eb9e0 dm: remove limited barrier support
Prepare for full barrier implementation: first remove the restricted support.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:13 +01:00
Martin K. Petersen
9c47008d13 dm: add integrity support
This patch provides support for data integrity passthrough in the device
mapper.

 - If one or more component devices support integrity an integrity
   profile is preallocated for the DM device.

 - If all component devices have compatible profiles the DM device is
   flagged as capable.

 - Handle integrity metadata when splitting and cloning bios.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:12 +01:00
Alexander Beregalov
91a9e99d76 md/raid1: fix build breakage
Fix this build error:

  drivers/md/raid1.c: In function 'raid1_congested':
  drivers/md/raid1.c:589: error: 'BDI_write_congested' undeclared

BDI_write_congested was changed in commit 1faa16d228 ("block: change the
request allocation/congestion logic to be sync/async based")

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 14:40:07 -07:00
NeilBrown
303a0e11d0 md/raid1 - don't assume newly allocated bvecs are initialised.
Since commit d3f761104b
newly allocated bvecs aren't initialised to NULL, so we have
to be more careful about freeing a bio which only managed
to get a few pages allocated to it.  Otherwise the resync
process crashes.

This patch is appropriate for 2.6.29-stable.

Cc: stable@kernel.org
Cc: "Jens Axboe" <jens.axboe@oracle.com>
Reported-by: Gabriele Tozzi <gabriele@tozzi.eu>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-04-06 14:40:38 +10:00
Linus Torvalds
d9b9be024a Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (36 commits)
  dm: set queue ordered mode
  dm: move wait queue declaration
  dm: merge pushback and deferred bio lists
  dm: allow uninterruptible wait for pending io
  dm: merge __flush_deferred_io into caller
  dm: move bio_io_error into __split_and_process_bio
  dm: rename __split_bio
  dm: remove unnecessary struct dm_wq_req
  dm: remove unnecessary work queue context field
  dm: remove unnecessary work queue type field
  dm: bio list add bio_list_add_head
  dm snapshot: persistent fix dtr cleanup
  dm snapshot: move status to exception store
  dm snapshot: move ctr parsing to exception store
  dm snapshot: use DMEMIT macro for status
  dm snapshot: remove dm_snap header
  dm snapshot: remove dm_snap header use
  dm exception store: move cow pointer
  dm exception store: move chunk_fields
  dm exception store: move dm_target pointer
  ...
2009-04-03 10:02:45 -07:00
Linus Torvalds
223cdea4c4 Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md: (53 commits)
  md/raid5 revise rules for when to update metadata during reshape
  md/raid5: minor code cleanups in make_request.
  md: remove CONFIG_MD_RAID_RESHAPE config option.
  md/raid5: be more careful about write ordering when reshaping.
  md: don't display meaningless values in sysfs files resync_start and sync_speed
  md/raid5: allow layout and chunksize to be changed on active array.
  md/raid5: reshape using largest of old and new chunk size
  md/raid5: prepare for allowing reshape to change layout
  md/raid5: prepare for allowing reshape to change chunksize.
  md/raid5: clearly differentiate 'before' and 'after' stripes during reshape.
  Documentation/md.txt update
  md: allow number of drives in raid5 to be reduced
  md/raid5: change reshape-progress measurement to cope with reshaping backwards.
  md: add explicit method to signal the end of a reshape.
  md/raid5: enhance raid5_size to work correctly with negative delta_disks
  md/raid5: drop qd_idx from r6_state
  md/raid6: move raid6 data processing to raid6_pq.ko
  md: raid5 run(): Fix max_degraded for raid level 4.
  md: 'array_size' sysfs attribute
  md: centralize ->array_sectors modifications
  ...
2009-04-03 09:08:19 -07:00
Mikulas Patocka
99360b4c18 dm: set queue ordered mode
Set queue ordered mode.  It doesn't really matter what we set here
because we don't ever put any requests on the queue.  But we need to set
something other than QUEUE_ORDERED_NONE so that __generic_make_request
passes barrier requests to us.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:39 +01:00