Commit graph

99 commits

Author SHA1 Message Date
Linus Torvalds
3419b45039 Merge branch 'for-4.4/io-poll' of git://git.kernel.dk/linux-block
Pull block IO poll support from Jens Axboe:
 "Various groups have been doing experimentation around IO polling for
  (really) fast devices.  The code has been reviewed and has been
  sitting on the side for a few releases, but this is now good enough
  for coordinated benchmarking and further experimentation.

  Currently O_DIRECT sync read/write are supported.  A framework is in
  the works that allows scalable stats tracking so we can auto-tune
  this.  And we'll add libaio support as well soon.  Fow now, it's an
  opt-in feature for test purposes"

* 'for-4.4/io-poll' of git://git.kernel.dk/linux-block:
  direct-io: be sure to assign dio->bio_bdev for both paths
  directio: add block polling support
  NVMe: add blk polling support
  block: add block polling support
  blk-mq: return tag/queue combo in the make_request_fn handlers
  block: change ->make_request_fn() and users to return a queue cookie
2015-11-10 17:23:49 -08:00
Jens Axboe
dece16353e block: change ->make_request_fn() and users to return a queue cookie
No functional changes in this patch, but it prepares us for returning
a more useful cookie related to the IO that was queued up.

Signed-off-by: Jens Axboe <axboe@fb.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
2015-11-07 10:40:46 -07:00
Geliang Tang
1c53e0d273 zram: make is_partial_io/valid_io_request/page_zero_filled return boolean
Make is_partial_io()/valid_io_request()/page_zero_filled() return boolean,
since each function only uses either one or zero as its return value.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Sergey SENOZHATSKY
1237275580 zram: keep the exact overcommited value in mem_used_max
`mem_used_max' is designed to store the max amount of memory zram consumed
to store the data.  However, it does not represent the actual
'overcommited' (max) value.  The existing code goes to -ENOMEM
overcommited case before it updates `->stats.max_used_pages', which hides
the reason we went to -ENOMEM in the first place -- we actually used more
memory than `->limit_pages':

        alloced_pages = zs_get_total_pages(meta->mem_pool);
        if (zram->limit_pages && alloced_pages > zram->limit_pages) {
                zs_free(meta->mem_pool, handle);
                ret = -ENOMEM;
                goto out;
        }

        update_used_max(zram, alloced_pages);

Which is misleading.  User will see -ENOMEM, check `->limit_pages', check
`->stats.max_used_pages', which will keep the value BEFORE zram passed
`->limit_pages', and see:
	`->stats.max_used_pages' < `->limit_pages'

Move update_used_max() before we do `->limit_pages' check, so that
user will see:
	`->stats.max_used_pages' > `->limit_pages'
should the overcommit and -ENOMEM happen.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Luis Henriques
1d5b43bfb6 zram: introduce comp algorithm fallback functionality
When the user supplies an unsupported compression algorithm, keep the
previously selected one (knowingly supported) or the default one (if the
compression algorithm hasn't been changed yet).

Note that previously this operation (i.e. setting an invalid algorithm)
would result in no algorithm being selected, which means that this
represents a small change in the default behaviour.

Minchan said:

For initializing zram, we need to set up 3 optional parameters in advance.

1. the number of compression streams
2. memory limitation
3. compression algorithm

Although user pass completely wrong value to set up for 1 and 2
parameters, it's okay because they have default value so zram will be
initialized with the default value (of course, when user passes a wrong
value via *echo*, sysfs returns -EINVAL so the user can notice it).

But 3 is not consistent with other optional parameters.  IOW, if the
user passes a wrong value to set up 3 parameter, zram's initialization
would fail unlike other optional parameters.

So this patch makes them consistent.

Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Luis Henriques
3aaf14da80 zram: fix possible use after free in zcomp_create()
zcomp_create() verifies the success of zcomp_strm_{multi,single}_create()
through comp->stream, which can potentially be pointing to memory that
was freed if these functions returned an error.

While at it, replace a 'ERR_PTR(-ENOMEM)' by a more generic
'ERR_PTR(error)' as in the future zcomp_strm_{multi,siggle}_create()
could return other error codes.  Function documentation updated
accordingly.

Fixes: beca3ec71f ("zram: add multi stream functionality")
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-17 21:16:07 -07:00
Sergey Senozhatsky
708649694a zram: unify error reporting
Make zram syslog error reporting more consistent. We have random
error levels in some places. For example, critical errors like
  "Error allocating memory for compressed page"
and
  "Unable to allocate temp memory"
are reported as KERN_INFO messages.

a) Reassign error levels

Error messages that directly affect zram
functionality -- pr_err():

 Error allocating zram address table
 Error creating memory pool
 Decompression failed! err=%d, page=%u
 Unable to allocate temp memory
 Compression failed! err=%d
 Error allocating memory for compressed page: %u, size=%zu
 Cannot initialise %s compressing backend
 Error allocating disk queue for device %d
 Error allocating disk structure for device %d
 Error creating sysfs group for device %d
 Unable to register zram-control class
 Unable to get major number

Messages that do not affect functionality, but user
must be warned (because sysfs attrs will be removed in
this particular case) -- pr_warn():

 %d (%s) Attribute %s (and others) will be removed. %s

Messages that do not affect functionality and mostly are
informative -- pr_info():

 Cannot change max compression streams
 Can't change algorithm for initialized device
 Cannot change disksize for initialized device
 Added device: %s
 Removed device: %s

b) Update sysfs_create_group() error message

First, it lacks a trailing new line; add it.  Second, every error message
in zram_add() has a "for device %d" part, which makes errors more
informative.  Add missing part to "Error creating sysfs group" message.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 15:35:28 -07:00
Sergey Senozhatsky
860c707dca zsmalloc: account the number of compacted pages
Compaction returns back to zram the number of migrated objects, which is
quite uninformative -- we have objects of different sizes so user space
cannot obtain any valuable data from that number.  Change compaction to
operate in terms of pages and return back to compaction issuer the
number of pages that were freed during compaction.  So from now on we
will export more meaningful value in zram<id>/mm_stat -- the number of
freed (compacted) pages.

This requires:
 (a) a rename of `num_migrated' to 'pages_compacted'
 (b) a internal API change -- return first_page's fullness_group from
     putback_zspage(), so we know when putback_zspage() did
     free_zspage().  It helps us to account compaction stats correctly.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 15:35:28 -07:00
Sergey Senozhatsky
7d3f393823 zsmalloc/zram: introduce zs_pool_stats api
`zs_compact_control' accounts the number of migrated objects but it has
a limited lifespan -- we lose it as soon as zs_compaction() returns back
to zram.  It worked fine, because (a) zram had it's own counter of
migrated objects and (b) only zram could trigger compaction.  However,
this does not work for automatic pool compaction (not issued by zram).
To account objects migrated during auto-compaction (issued by the
shrinker) we need to store this number in zs_pool.

Define a new `struct zs_pool_stats' structure to keep zs_pool's stats
there.  It provides only `num_migrated', as of this writing, but it
surely can be extended.

A new zsmalloc zs_pool_stats() symbol exports zs_pool's stats back to
caller.

Use zs_pool_stats() in zram and remove `num_migrated' from zram_stats.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 15:35:28 -07:00
Linus Torvalds
1081230b74 Merge branch 'for-4.3/core' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
 "This first core part of the block IO changes contains:

   - Cleanup of the bio IO error signaling from Christoph.  We used to
     rely on the uptodate bit and passing around of an error, now we
     store the error in the bio itself.

   - Improvement of the above from myself, by shrinking the bio size
     down again to fit in two cachelines on x86-64.

   - Revert of the max_hw_sectors cap removal from a revision again,
     from Jeff Moyer.  This caused performance regressions in various
     tests.  Reinstate the limit, bump it to a more reasonable size
     instead.

   - Make /sys/block/<dev>/queue/discard_max_bytes writeable, by me.
     Most devices have huge trim limits, which can cause nasty latencies
     when deleting files.  Enable the admin to configure the size down.
     We will look into having a more sane default instead of UINT_MAX
     sectors.

   - Improvement of the SGP gaps logic from Keith Busch.

   - Enable the block core to handle arbitrarily sized bios, which
     enables a nice simplification of bio_add_page() (which is an IO hot
     path).  From Kent.

   - Improvements to the partition io stats accounting, making it
     faster.  From Ming Lei.

   - Also from Ming Lei, a basic fixup for overflow of the sysfs pending
     file in blk-mq, as well as a fix for a blk-mq timeout race
     condition.

   - Ming Lin has been carrying Kents above mentioned patches forward
     for a while, and testing them.  Ming also did a few fixes around
     that.

   - Sasha Levin found and fixed a use-after-free problem introduced by
     the bio->bi_error changes from Christoph.

   - Small blk cgroup cleanup from Viresh Kumar"

* 'for-4.3/core' of git://git.kernel.dk/linux-block: (26 commits)
  blk: Fix bio_io_vec index when checking bvec gaps
  block: Replace SG_GAPS with new queue limits mask
  block: bump BLK_DEF_MAX_SECTORS to 2560
  Revert "block: remove artifical max_hw_sectors cap"
  blk-mq: fix race between timeout and freeing request
  blk-mq: fix buffer overflow when reading sysfs file of 'pending'
  Documentation: update notes in biovecs about arbitrarily sized bios
  block: remove bio_get_nr_vecs()
  fs: use helper bio_add_page() instead of open coding on bi_io_vec
  block: kill merge_bvec_fn() completely
  md/raid5: get rid of bio_fits_rdev()
  md/raid5: split bio for chunk_aligned_read
  block: remove split code in blkdev_issue_{discard,write_same}
  btrfs: remove bio splitting and merge_bvec_fn() calls
  bcache: remove driver private bio splitting code
  block: simplify bio_add_page()
  block: make generic_make_request handle arbitrarily sized bios
  blk-cgroup: Drop unlikely before IS_ERR(_OR_NULL)
  block: don't access bio->bi_error after bio_put()
  block: shrink struct bio down to 2 cache lines again
  ...
2015-09-02 13:10:25 -07:00
Sergey Senozhatsky
4ce321f574 zram: fix pool name truncation
zram_meta_alloc() constructs a pool name for zs_create_pool() call as

    snprintf(pool_name, sizeof(pool_name), "zram%d", device_id);

However, it defines pool name buffer to be only 8 bytes long (minus
trailing zero), which means that we can have only 1000 pool names: zram0
-- zram999.

With CONFIG_ZSMALLOC_STAT enabled an attempt to create a device zram1000
can fail if device zram100 already exists, because snprintf() will
truncate new pool name to zram100 and pass it debugfs_create_dir(),
causing:

  debugfs dir <zram100> creation failed
  zram: Error creating memory pool

... and so on.

Fix it by passing zram->disk->disk_name to zram_meta_alloc() instead of
divice_id.  We construct zram%d name earlier and keep it as a ->disk_name,
no need to snprintf() it again.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-14 15:56:32 -07:00
Kent Overstreet
54efd50bfd block: make generic_make_request handle arbitrarily sized bios
The way the block layer is currently written, it goes to great lengths
to avoid having to split bios; upper layer code (such as bio_add_page())
checks what the underlying device can handle and tries to always create
bios that don't need to be split.

But this approach becomes unwieldy and eventually breaks down with
stacked devices and devices with dynamic limits, and it adds a lot of
complexity. If the block layer could split bios as needed, we could
eliminate a lot of complexity elsewhere - particularly in stacked
drivers. Code that creates bios can then create whatever size bios are
convenient, and more importantly stacked drivers don't have to deal with
both their own bio size limitations and the limitations of the
(potentially multiple) devices underneath them.  In the future this will
let us delete merge_bvec_fn and a bunch of other code.

We do this by adding calls to blk_queue_split() to the various
make_request functions that need it - a few can already handle arbitrary
size bios. Note that we add the call _after_ any call to
blk_queue_bounce(); this means that blk_queue_split() and
blk_recalc_rq_segments() don't need to be concerned with bouncing
affecting segment merging.

Some make_request_fn() callbacks were simple enough to audit and verify
they don't need blk_queue_split() calls. The skipped ones are:

 * nfhd_make_request (arch/m68k/emu/nfblock.c)
 * axon_ram_make_request (arch/powerpc/sysdev/axonram.c)
 * simdisk_make_request (arch/xtensa/platforms/iss/simdisk.c)
 * brd_make_request (ramdisk - drivers/block/brd.c)
 * mtip_submit_request (drivers/block/mtip32xx/mtip32xx.c)
 * loop_make_request
 * null_queue_bio
 * bcache's make_request fns

Some others are almost certainly safe to remove now, but will be left
for future patches.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: drbd-user@lists.linbit.com
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Jim Paris <jim@jtan.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Acked-by: NeilBrown <neilb@suse.de> (for the 'md/md.c' bits)
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
[dpark: skip more mq-based drivers, resolve merge conflicts, etc.]
Signed-off-by: Dongsu Park <dpark@posteo.net>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-13 12:31:33 -06:00
Christoph Hellwig
4246a0b63b block: add a bi_error field to struct bio
Currently we have two different ways to signal an I/O error on a BIO:

 (1) by clearing the BIO_UPTODATE flag
 (2) by returning a Linux errno value to the bi_end_io callback

The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario.  Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.

So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-29 08:55:15 -06:00
Jens Axboe
2bb4cd5cc4 block: have drivers use blk_queue_max_discard_sectors()
Some drivers use it now, others just set the limits field manually.
But in preparation for splitting this into a hard and soft limit,
ensure that they all call the proper function for setting the hw
limit for discards.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-17 08:41:53 -06:00
Sergey Senozhatsky
d93435c3fb zram: check comp algorithm availability earlier
Improvement idea by Marcin Jabrzyk.

comp_algorithm_store() silently accepts any supplied algorithm name,
because zram performs algorithm availability check later, during the
device configuration phase in disksize_store() and emits the following
error:

  "zram: Cannot initialise %s compressing backend"

this error line is somewhat generic and, besides, can indicate a failed
attempt to allocate compression backend's working buffers.

add algorithm availability check to comp_algorithm_store():

  echo lzz > /sys/block/zram0/comp_algorithm
  -bash: echo: write error: Invalid argument

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Marcin Jabrzyk <m.jabrzyk@samsung.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:37 -07:00
Sergey Senozhatsky
4bbacd51a6 zram: cut trailing newline in algorithm name
Supplied sysfs values sometimes contain new-line symbols (echo vs.  echo
-n), which we also copy as a compression algorithm name.  it works fine
when we lookup for compression algorithm, because we use sysfs_streq()
which takes care of new line symbols.  however, it doesn't look nice when
we print compression algorithm name if zcomp_create() failed:

 zram: Cannot initialise LXZ
            compressing backend

cut trailing new-line, so the error string will look like

  zram: Cannot initialise LXZ compressing backend

we also now can replace sysfs_streq() in zcomp_available_show() with
strcmp().

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
17162f41f0 zram: cosmetic zram_bvec_write() cleanup
`bool locked' local variable tells us if we should perform
zcomp_strm_release() or not (jumped to `out' label before
zcomp_strm_find() occurred), which is equivalent to `zstrm' being or not
being NULL.  remove `locked' and check `zstrm' instead.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
6566d1a32b zram: add dynamic device add/remove functionality
We currently don't support on-demand device creation.  The one and only
way to have N zram devices is to specify num_devices module parameter
(default value: 1).  IOW if, for some reason, at some point, user wants
to have N + 1 devies he/she must umount all the existing devices, unload
the module, load the module passing num_devices equals to N + 1.  And do
this again, if needed.

This patch introduces zram control sysfs class, which has two sysfs
attrs:
- hot_add      -- add a new zram device
- hot_remove   -- remove a specific (device_id) zram device

hot_add sysfs attr is read-only and has only automatic device id
assignment mode (as requested by Minchan Kim).  read operation performed
on this attr creates a new zram device and returns back its device_id or
error status.

Usage example:
	# add a new specific zram device
	cat /sys/class/zram-control/hot_add
	2

	# remove a specific zram device
	echo 4 > /sys/class/zram-control/hot_remove

Returning zram_add() error code back to user (-ENOMEM in this case)

	cat /sys/class/zram-control/hot_add
	cat: /sys/class/zram-control/hot_add: Cannot allocate memory

NOTE, there might be users who already depend on the fact that at least
zram0 device gets always created by zram_init(). Preserve this behavior.

[minchan@kernel.org: use zram->claim to avoid lockdep splat]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
f405c445a4 zram: close race by open overriding
[ Original patch from Minchan Kim <minchan@kernel.org> ]

Commit ba6b17d68c ("zram: fix umount-reset_store-mount race
condition") introduced bdev->bd_mutex to protect a race between mount
and reset.  At that time, we don't have dynamic zram-add/remove feature
so it was okay.

However, as we introduce dynamic device feature, bd_mutex became
trouble.

	CPU 0

echo 1 > /sys/block/zram<id>/reset
  -> kernfs->s_active(A)
    -> zram:reset_store->bd_mutex(B)

	CPU 1

echo <id> > /sys/class/zram/zram-remove
  ->zram:zram_remove: bd_mutex(B)
  -> sysfs_remove_group
    -> kernfs->s_active(A)

IOW, AB -> BA deadlock

The reason we are holding bd_mutex for zram_remove is to prevent
any incoming open /dev/zram[0-9]. Otherwise, we could remove zram
others already have opened. But it causes above deadlock problem.

To fix the problem, this patch overrides block_device.open and
it returns -EBUSY if zram asserts he claims zram to reset so any
incoming open will be failed so we don't need to hold bd_mutex
for zram_remove ayn more.

This patch is to prepare for zram-add/remove feature.

[sergey.senozhatsky@gmail.com: simplify reset_store()]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
92ff152887 zram: return zram device_id from zram_add()
This patch prepares zram to enable on-demand device creation.
zram_add() performs automatic device_id assignment and returns
new device id (>= 0) or error code (< 0).

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
b31177f2a9 zram: trivial: correct flag operations comment
We don't have meta->tb_lock anymore and use meta table entry bit_spin_lock
instead. update corresponding comment.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
d12b63c927 zram: report every added and removed device
With dynamic device creation/removal (which will be introduced later in
the series) printing num_devices in zram_init() will not make a lot of
sense, as well as printing the number of destroyed devices in
destroy_devices().  Print per-device action (added/removed) in zram_add()
and zram_remove() instead.

Example:

[ 3645.259652] zram: Added device: zram5
[ 3646.152074] zram: Added device: zram6
[ 3650.585012] zram: Removed device: zram5
[ 3655.845584] zram: Added device: zram8
[ 3660.975223] zram: Removed device: zram6

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
c3cdb40e66 zram: remove max_num_devices limitation
Limiting the number of zram devices to 32 (default max_num_devices value)
is confusing, let's drop it.  A user with 2TB or 4TB of RAM, for example,
can request as many devices as he can handle.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
522698d7ca zram: reorganize code layout
This patch looks big, but basically it just moves code blocks.
No functional changes.

Our current code layout looks like a sandwitch.

For example,
a) between read/write handlers, we have update_used_max() helper function:

static int zram_decompress_page
static int zram_bvec_read
static inline void update_used_max
static int zram_bvec_write
static int zram_bvec_rw

b) RW request handlers __zram_make_request/zram_bio_discard are divided by
sysfs attr reset_store() function and corresponding zram_reset_device()
handler:

static void zram_bio_discard
static void zram_reset_device
static ssize_t disksize_store
static ssize_t reset_store
static void __zram_make_request

c) we first a bunch of sysfs read/store functions. then a number of
one-liners, then helper functions, RW functions, sysfs functions, helper
functions again, and so on.

Reorganize layout to be more logically grouped (a brief description,
`cat zram_drv.c | grep static` gives a bigger picture):

-- one-liners: zram_test_flag/etc.

-- helpers: is_partial_io/update_position/etc

-- sysfs attr show/store functions + ZRAM_ATTR_RO() generated stats
show() functions
exception: reset and disksize store functions are required to be after
meta() functions. because we do device create/destroy actions in these
sysfs handlers.

-- "mm" functions: meta get/put, meta alloc/free, page free
static inline bool zram_meta_get
static inline void zram_meta_put
static void zram_meta_free
static struct zram_meta *zram_meta_alloc
static void zram_free_page

-- a block of I/O functions
static int zram_decompress_page
static int zram_bvec_read
static int zram_bvec_write
static void zram_bio_discard
static int zram_bvec_rw
static void __zram_make_request
static void zram_make_request
static void zram_slot_free_notify
static int zram_rw_page

-- device contol: add/remove/init/reset functions (+zram-control class
will sit here)
static int zram_reset_device
static ssize_t reset_store
static ssize_t disksize_store
static int zram_add
static void zram_remove
static int __init zram_init
static void __exit zram_exit

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
85508ec6cb zram: use idr instead of `zram_devices' array
This patch makes some preparations for on-demand device add/remove
functionality.

Remove `zram_devices' array and switch to id-to-pointer translation (idr).
idr doesn't bloat zram struct with additional members, f.e.  list_head,
yet still provides ability to match the device_id with the device pointer.

No user-space visible changes.

[Julia.Lawall@lip6.fr: return -ENOMEM when `queue' alloc fails]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
3bca3ef769 zram: cosmetic ZRAM_ATTR_RO code formatting tweak
Fix a misplaced backslash.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Marcin Jabrzyk
9e65bf68a8 zram: remove obsolete ZRAM_DEBUG option
This config option doesn't provide any usage for zram.

Signed-off-by: Marcin Jabrzyk <m.jabrzyk@samsung.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:35 -07:00
Weijie Yang
d7ad41a1c4 zram: clear disk io accounting when reset zram device
Clear zram disk io accounting when resetting the zram device.  Otherwise
the residual io accounting stat will affect the diskstat in the next
zram active cycle.

Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-10 16:43:43 -07:00
Andrew Morton
99ebbd30e3 revert "zram: move compact_store() to sysfs functions area"
Revert commit c72c6160d9

It was intended to be a cosmetic change that w/o any functional change
and was part of a bigger change:

  http://lkml.iu.edu/hypermail/linux/kernel/1503.1/01818.html

Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-05 17:10:10 -07:00
Julia Lawall
201c7b72f0 zram: fix error return code
Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:22 -07:00
Sergey Senozhatsky
8f7d282c71 zram: deprecate zram attrs sysfs nodes
Add Documentation/ABI/obsolete/sysfs-block-zram file and list obsolete and
deprecated attributes there.  The patch also adds additional information
to zram documentation and describes the basic strategy:

- the existing RW nodes will be downgraded to WO nodes (in 4.11)
- deprecated RO sysfs nodes will eventually be removed (in 4.11)

Users will be additionally notified about deprecated attr usage by
pr_warn_once() (added to every deprecated attr _show()), as suggested by
Minchan Kim.

User space is advised to use zram<id>/stat, zram<id>/io_stat and
zram<id>/mm_stat files.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:21 -07:00
Sergey Senozhatsky
4f2109f608 zram: export new 'mm_stat' sysfs attrs
Per-device `zram<id>/mm_stat' file provides mm statistics of a particular
zram device in a format similar to block layer statistics.  The file
consists of a single line and represents the following stats (separated by
whitespace):

        orig_data_size
        compr_data_size
        mem_used_total
        mem_limit
        mem_used_max
        zero_pages
        num_migrated

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:21 -07:00
Sergey Senozhatsky
2f6a3bed73 zram: export new 'io_stat' sysfs attrs
Per-device `zram<id>/io_stat' file provides accumulated I/O statistics of
particular zram device in a format similar to block layer statistics.  The
file consists of a single line and represents the following stats
(separated by whitespace):

        failed_reads
        failed_writes
        invalid_io
        notify_free

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:21 -07:00
Sergey Senozhatsky
8811a9421b zram: use generic start/end io accounting
Use bio generic_start_io_acct() and generic_end_io_acct() to account
device's block layer statistics.  This will let users to monitor zram
activities using sysstat and similar packages/tools.

Apart from the usual per-stat sysfs attr, zram IO stats are now also
available in '/sys/block/zram<id>/stat' and '/proc/diskstats' files.

We will slowly get rid of per-stat sysfs files.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:21 -07:00
Sergey Senozhatsky
c72c6160d9 zram: move compact_store() to sysfs functions area
A cosmetic change.  We have a new code layout and keep zram per-device
sysfs store and show functions in one place.  Move compact_store() to that
handlers block to conform to current layout.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:21 -07:00
Sergey Senozhatsky
10447b60be zram: remove `num_migrated' device attr
This patch introduces rework to zram stats.  We have per-stat sysfs nodes,
and it makes things a bit hard to use in user space: it doesn't give an
immediate stats 'snapshot', it requires user space to use more syscalls -
open, read, close for every stat file, with appropriate error checks on
every step, etc.

First, zram now accounts block layer statistics, available in
/sys/block/zram<id>/stat and /proc/diskstats files.  So some new stats are
available (see Documentation/block/stat.txt), besides, zram's activities
now can be monitored by sysstat's iostat or similar tools.

Example:
cat /sys/block/zram0/stat
248     0    1984    0   251029     0  2008232   5120   0   5116   5116

Second, group currently exported on per-stat basis nodes into two
categories (files):

-- zram<id>/io_stat
accumulates device's IO stats, that are not accounted by block layer,
and contains:
        failed_reads
        failed_writes
        invalid_io
        notify_free

Example:
cat /sys/block/zram0/io_stat
0        0        0   652572

-- zram<id>/mm_stat
accumulates zram mm stats and contains:
        orig_data_size
        compr_data_size
        mem_used_total
        mem_limit
        mem_used_max
        zero_pages
        num_migrated

Example:
cat /sys/block/zram0/mm_stat
434634752 270288572 279158784        0 579895296    15060        0

per-stat sysfs nodes are now considered to be deprecated and we plan to
remove them (and clean up some of the existing stat code) in two years (as
of now, there is no warning printed to syslog about deprecated stats being
used).  User space is advised to use the above mentioned 3 files.

This patch (of 7):

Remove sysfs `num_migrated' attribute.  We are moving away from per-stat
device attrs towards 3 stat files that will accumulate io and mm stats in
a format similar to block layer statistics in /sys/block/<dev>/stat.  That
will be easier to use in user space, and reduce the number of syscalls
needed to read zram device statistics.

`num_migrated' will return back in zram<id>/mm_stat file.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:21 -07:00
Minchan Kim
4e3ba87845 zram: support compaction
Now that zsmalloc supports compaction, zram can use it.  For the first
step, this patch exports compact knob via sysfs so user can do compaction
via "echo 1 > /sys/block/zram0/compact".

Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Gunho Lee <gunho.lee@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:21 -07:00
Joonsoo Kim
2ea55a2cae zram: use proper type to update max_used_pages
max_used_pages is defined as atomic_long_t so we need to use unsigned
long to keep temporary value for it rather than int which is smaller
than unsigned long in a 64 bit system.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-28 09:57:51 -08:00
Ganesh Mahendran
3eba0c6a56 mm/zpool: add name argument to create zpool
Currently the underlay of zpool: zsmalloc/zbud, do not know who creates
them.  There is not a method to let zsmalloc/zbud find which caller they
belong to.

Now we want to add statistics collection in zsmalloc.  We need to name the
debugfs dir for each pool created.  The way suggested by Minchan Kim is to
use a name passed by caller(such as zram) to create the zsmalloc pool.

    /sys/kernel/debug/zsmalloc/zram0

This patch adds an argument `name' to zs_create_pool() and other related
functions.

Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 18:54:12 -08:00
Sergey Senozhatsky
ee98016010 zram: remove request_queue from struct zram
`struct zram' contains both `struct gendisk' and `struct request_queue'.
the latter can be deleted, because zram->disk carries ->queue pointer, and
->queue carries zram pointer:

create_device()
	zram->queue->queuedata = zram
	zram->disk->queue = zram->queue
	zram->disk->private_data = zram

so zram->queue is not needed, we can access all necessary data anyway.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 18:54:12 -08:00
Minchan Kim
08eee69fcf zram: remove init_lock in zram_make_request
Admin could reset zram during I/O operation going on so we have used
zram->init_lock as read-side lock in I/O path to prevent sudden zram
meta freeing.

However, the init_lock is really troublesome.  We can't do call
zram_meta_alloc under init_lock due to lockdep splat because
zram_rw_page is one of the function under reclaim path and hold it as
read_lock while other places in process context hold it as write_lock.
So, we have used allocation out of the lock to avoid lockdep warn but
it's not good for readability and fainally, I met another lockdep splat
between init_lock and cpu_hotplug from kmem_cache_destroy during working
zsmalloc compaction.  :(

Yes, the ideal is to remove horrible init_lock of zram in rw path.  This
patch removes it in rw path and instead, add atomic refcount for meta
lifetime management and completion to free meta in process context.
It's important to free meta in process context because some of resource
destruction needs mutex lock, which could be held if we releases the
resource in reclaim context so it's deadlock, again.

As a bonus, we could remove init_done check in rw path because
zram_meta_get will do a role for it, instead.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Ganesh Mahendran <opensource.ganesh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 18:54:12 -08:00
Minchan Kim
2b269ce6fc zram: check bd_openers instead of bd_holders
bd_holders is increased only when user open the device file as FMODE_EXCL
so if something opens zram0 as !FMODE_EXCL and request I/O while another
user reset zram0, we can see following warning.

  zram0: detected capacity change from 0 to 64424509440
  Buffer I/O error on dev zram0, logical block 180823, lost async page write
  Buffer I/O error on dev zram0, logical block 180824, lost async page write
  Buffer I/O error on dev zram0, logical block 180825, lost async page write
  Buffer I/O error on dev zram0, logical block 180826, lost async page write
  Buffer I/O error on dev zram0, logical block 180827, lost async page write
  Buffer I/O error on dev zram0, logical block 180828, lost async page write
  Buffer I/O error on dev zram0, logical block 180829, lost async page write
  Buffer I/O error on dev zram0, logical block 180830, lost async page write
  Buffer I/O error on dev zram0, logical block 180831, lost async page write
  Buffer I/O error on dev zram0, logical block 180832, lost async page write
  ------------[ cut here ]------------
  WARNING: CPU: 11 PID: 1996 at fs/block_dev.c:57 __blkdev_put+0x1d7/0x210()
  Modules linked in:
  CPU: 11 PID: 1996 Comm: dd Not tainted 3.19.0-rc6-next-20150202+ #1125
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Call Trace:
    dump_stack+0x45/0x57
    warn_slowpath_common+0x8a/0xc0
    warn_slowpath_null+0x1a/0x20
    __blkdev_put+0x1d7/0x210
    blkdev_put+0x50/0x130
    blkdev_close+0x25/0x30
    __fput+0xdf/0x1e0
    ____fput+0xe/0x10
    task_work_run+0xa7/0xe0
    do_notify_resume+0x49/0x60
    int_signal+0x12/0x17
  ---[ end trace 274fbbc5664827d2 ]---

The warning comes from bdev_write_node in blkdev_put path.

   static void bdev_write_inode(struct inode *inode)
   {
        spin_lock(&inode->i_lock);
        while (inode->i_state & I_DIRTY) {
                spin_unlock(&inode->i_lock);
                WARN_ON_ONCE(write_inode_now(inode, true)); <========= here.
                spin_lock(&inode->i_lock);
        }
        spin_unlock(&inode->i_lock);
   }

The reason is dd process encounters I/O fails due to sudden block device
disappear so in filemap_check_errors in __writeback_single_inode returns
-EIO.

If we check bd_openers instead of bd_holders, we could address the
problem.  When I see the brd, it already have used it rather than
bd_holders so although I'm not a expert of block layer, it seems to be
better.

I can make following warning with below simple script.  In addition, I
added msleep(2000) below set_capacity(zram->disk, 0) after applying your
patch to make window huge(Kudos to Ganesh!)

script:

   echo $((60<<30)) > /sys/block/zram0/disksize
   setsid dd if=/dev/zero of=/dev/zram0 &
   sleep 1
   setsid echo 1 > /sys/block/zram0/reset

Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Ganesh Mahendran <opensource.ganesh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 18:54:11 -08:00
Sergey Senozhatsky
a096cafc31 zram: rework reset and destroy path
We need to return set_capacity(disk, 0) from reset_store() back to
zram_reset_device(), a catch by Ganesh Mahendran.  Potentially, we can
race set_capacity() calls from init and reset paths.

The problem is that zram_reset_device() is also getting called from
zram_exit(), which performs operations in misleading reversed order -- we
first create_device() and then init it, while zram_exit() perform
destroy_device() first and then does zram_reset_device().  This is done to
remove sysfs group before we reset device, so we can continue with device
reset/destruction not being raced by sysfs attr write (f.e.  disksize).

Apart from that, destroy_device() releases zram->disk (but we still have
->disk pointer), so we cannot acces zram->disk in later
zram_reset_device() call, which may cause additional errors in the future.

So, this patch rework and cleanup destroy path.

1) remove several unneeded goto labels in zram_init()

2) factor out zram_init() error path and zram_exit() into
   destroy_devices() function, which takes the number of devices to
   destroy as its argument.

3) remove sysfs group in destroy_devices() first, so we can reorder
   operations -- reset device (as expected) goes before disk destroy and
   queue cleanup.  So we can always access ->disk in zram_reset_device().

4) and, finally, return set_capacity() back under ->init_lock.

[akpm@linux-foundation.org: tweak comment]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 18:54:11 -08:00
Sergey Senozhatsky
ba6b17d68c zram: fix umount-reset_store-mount race condition
Ganesh Mahendran was the first one who proposed to use bdev->bd_mutex to
avoid ->bd_holders race condition:

        CPU0                            CPU1
umount /* zram->init_done is true */
reset_store()
bdev->bd_holders == 0                   mount
...                                     zram_make_request()
zram_reset_device()

However, his solution required some considerable amount of code movement,
which we can avoid.

Apart from using bdev->bd_mutex in reset_store(), this patch also
simplifies zram_reset_device().

zram_reset_device() has a bool parameter reset_capacity which tells it
whether disk capacity and itself disk should be reset.  There are two
zram_reset_device() callers:

-- zram_exit() passes reset_capacity=false
-- reset_store() passes reset_capacity=true

So we can move reset_capacity-sensitive work out of zram_reset_device()
and perform it unconditionally in reset_store().  This also lets us drop
reset_capacity parameter from zram_reset_device() and pass zram pointer
only.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 18:54:11 -08:00
Ganesh Mahendran
1fec117281 zram: free meta table in zram_meta_free
zram_meta_alloc() and zram_meta_free() are a pair.  In
zram_meta_alloc(), meta table is allocated.  So it it better to free it
in zram_meta_free().

Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 18:54:11 -08:00
Sergey Senozhatsky
b817995832 zram: clean up zram_meta_alloc()
A trivial cleanup of zram_meta_alloc() error handling.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 18:54:11 -08:00
Ganesh Mahendran
083914eab9 zram: use DEVICE_ATTR_[RW|RO|WO] to define zram sys device attribute
In current zram, we use DEVICE_ATTR() to define sys device attributes.
SO, we need to set (S_IRUGO | S_IWUSR) permission and other arguments
manually.  Linux already provids the macro DEVICE_ATTR_[RW|RO|WO] to
define sys device attribute.  It is simple and readable.

This patch uses kernel defined macro DEVICE_ATTR_[RW|RO|WO] to define
zram device attribute.

Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 12:42:50 -08:00
Mahendran Ganesh
d49b1c254c mm/zram: correct ZRAM_ZERO flag bit position
In struct zram_table_entry, the element *value* contains obj size and obj
zram flags.  Bit 0 to bit (ZRAM_FLAG_SHIFT - 1) represent obj size, and
bit ZRAM_FLAG_SHIFT to the highest bit of unsigned long represent obj
zram_flags.  So the first zram flag(ZRAM_ZERO) should be from
ZRAM_FLAG_SHIFT instead of (ZRAM_FLAG_SHIFT + 1).

This patch fixes this cosmetic issue.

Also fix a typo, "page in now accessed" -> "page is now accessed"

Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 12:42:50 -08:00
karam.lee
8c7f01025f zram: implement rw_page operation of zram
This patch implements rw_page operation for zram block device.

I implemented the feature in zram and tested it.  Test bed was the G2, LG
electronic mobile device, whtich has msm8974 processor and 2GB memory.

With a memory allocation test program consuming memory, the system
generates swap.

Operating time of swap_write_page() was measured.

--------------------------------------------------
|             |   operating time   | improvement |
|             |  (20 runs average) |             |
--------------------------------------------------
|with patch   |    1061.15 us      |    +2.4%    |
--------------------------------------------------
|without patch|    1087.35 us      |             |
--------------------------------------------------

Each test(with paged_io,with BIO) result set shows normal distribution and
has equal variance.  I mean the two values are valid result to compare.  I
can say operation with paged I/O(without BIO) is faster 2.4% with
confidence level 95%.

[minchan@kernel.org: make rw_page opeartion return 0]
[minchan@kernel.org: rely on the bi_end_io for zram_rw_page fails]
[sergey.senozhatsky@gmail.com: code cleanup]
[minchan@kernel.org: add comment]
Signed-off-by: karam.lee <karam.lee@lge.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: <seungho1.park@lge.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 12:42:50 -08:00
karam.lee
54850e73e8 zram: change parameter from vaild_io_request()
This patch changes parameter of valid_io_request for common usage.  The
purpose of valid_io_request() is to determine if bio request is valid or
not.

This patch use I/O start address and size instead of a BIO parameter for
common usage.

Signed-off-by: karam.lee <karam.lee@lge.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: <seungho1.park@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 12:42:50 -08:00