This is based on Josef's "Btrfs: turbo charge fsync".
The current btrfs checks if an inode is in log by comparing
root's last_log_commit to inode's last_sub_trans[2].
But the problem is that this root->last_log_commit is shared among
inodes.
Say we have N inodes to be logged, after the first inode,
root's last_log_commit is updated and the N-1 remained files will
be skipped.
This fixes the bug by keeping a local copy of root's last_log_commit
inside each inode and this local copy will be maintained itself.
[1]: we regard each log transaction as a subset of btrfs's transaction,
i.e. sub_trans
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
This is based on Josef's "Btrfs: turbo charge fsync".
The above Josef's patch performs very good in random sync write test,
because we won't have too much extents to merge.
However, it does not performs good on the test:
dd if=/dev/zero of=foobar bs=4k count=12500 oflag=sync
The reason is when we do sequencial sync write, we need to merge the
current extent just with the previous one, so that we can get accumulated
extents to log:
A(4k) --> AA(8k) --> AAA(12k) --> AAAA(16k) ...
So we'll have to flush more and more checksum into log tree, which is the
bottleneck according to my tests.
But we can avoid this by telling fsync the real extents that are needed
to be logged.
With this, I did the above dd sync write test (size=50m),
w/o (orig) w/ (josef's) w/ (this)
SATA 104KB/s 109KB/s 121KB/s
ramdisk 1.5MB/s 1.5MB/s 10.7MB/s (613%)
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
We will stop and restart a transaction every time we move to a different leaf
when truncating a file. This is for enospc reasons, but really we could
probably get away with doing this a little better by actually working until we
hit an ENOSPC. So add a ->failfast flag to the block_rsv and set it when we do
truncates which will fail as soon as the block rsv runs out of space, and then
at that point we can stop and restart the transaction and refill the block rsv
and carry on. This will make rm'ing of a file with lots of extents a bit
faster. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
This is based on Josef's "Btrfs: turbo charge fsync".
We should cleanup those extents after we've finished logging inode,
otherwise we may do redundant work on them.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
I hit this a couple times while working on my fsync patch (all my bugs, not
normal operation), but with my new stuff we could have new errors from cases
I have not encountered, so instead of BUG()'ing we should be WARN()'ing so
that we are notified there is a problem but the user doesn't lose their
data. We can easily commit the transaction in the case that the tree
logging fails and still be fine, so let's try and be as nice to the user as
possible. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
At least for the vm workload. Currently on fsync we will
1) Truncate all items in the log tree for the given inode if they exist
and
2) Copy all items for a given inode into the log
The problem with this is that for things like VMs you can have lots of
extents from the fragmented writing behavior, and worst yet you may have
only modified a few extents, not the entire thing. This patch fixes this
problem by tracking which transid modified our extent, and then when we do
the tree logging we find all of the extents we've modified in our current
transaction, sort them and commit them. We also only truncate up to the
xattrs of the inode and copy that stuff in normally, and then just drop any
extents in the range we have that exist in the log already. Here are some
numbers of a 50 meg fio job that does random writes and fsync()s after every
write
Original Patched
SATA drive 82KB/s 140KB/s
Fusion drive 431KB/s 2532KB/s
So around 2-6 times faster depending on your hardware. There are a few
corner cases, for example if you truncate at all we have to do it the old
way since there is no way to be sure what is in the log is ok. This
probably could be done smarter, but if you write-fsync-truncate-write-fsync
you deserve what you get. All this work is in RAM of course so if your
inode gets evicted from cache and you read it in and fsync it we'll do it
the slow way if we are still in the same transaction that we last modified
the inode in.
The biggest cool part of this is that it requires no changes to the recovery
code, so if you fsync with this patch and crash and load an old kernel, it
will run the recovery and be a-ok. I have tested this pretty thoroughly
with an fsync tester and everything comes back fine, as well as xfstests.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
While working on my fsync patch my fsync tester kept hitting mismatching
md5sums when I would randomly write to a prealloc'ed region, syncfs() and
then write to the prealloced region some more and then fsync() and then
immediately reboot. This is because the tree logging code will skip writing
csums for file extents who's generation is less than the current running
transaction. When we mark extents as written we haven't been updating their
generation so they were always being skipped. This wouldn't happen if you
were to preallocate and then write in the same transaction, but if you for
example prealloced a VM you could definitely run into this problem. This
patch makes my fsync tester happy again. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Swinging this pendulum back the other way. We've been allocating chunks up
to 2% of the disk no matter how much we actually have allocated. So instead
fix this calculation to only allocate chunks if we have more than 80% of the
space available allocated. Please test this as it will likely cause all
sorts of ENOSPC problems to pop up suddenly. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
There is a completely impossible situation to hit where you can preallocate
a file, fsync it, write into the preallocated region, have the transaction
commit twice and then fsync and then immediately lose power and lose all of
the contents of the write. This patch fixes this just so I feel better
about the situation and because it is lightweight, we just update the
last_trans when we finish an ordered IO and we don't update the inode
itself. This way we are completely safe and I feel better. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The btrfs send code was assuming the offset of the file item into the
extent translated to bytes on disk. If we're compressed, this isn't
true, and so it was off into extents owned by other files.
It was also improperly handling inline extents. This solves a crash
where we may have gone past the end of the file extent item by not
testing early enough for an inline extent. It also solves problems
where we have a whole between the end of the inline item and the start
of the full extent.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We can't do the deleted/reused logic for top/root inodes as it would
create a stream that tries to delete and recreate the root dir.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
We have to ignore inode/space cache objects in send/receive.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
We need to pass the root that we determined earlier to iterate_inode_ref.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
The previous check was working fine, but this check should be
easier to read. Also, we could theoritically have some exotic
bugs with the previous checks.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
A leftover from older code and unused now.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Updating send_progress in process_recorded_refs was not correct.
It got updated too early in the cur_inode_new_gen case.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Reported-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Btrfs send/receive uses the aux field to store inode numbers. On
32 bit machines this may become a problem.
Also fix all users of ulist_add and ulist_add_merged.
Reported-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
We can't easily use the index of the radix tree for inums as the
radix tree uses 32bit indexes on 32bit kernels. For 32bit kernels,
we now use the lower 32bit of the inum as index and an additional
list to store multiple entries per radix tree entry.
Reported-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
When everything is done, name_cache_free is called which however
forgot to call kfree on the cache entries.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
If we break, we may miss the clone from send_root which we prefer
over all other clones.
Commit is a result of Arne's review.
Reported-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Don't have a seperate return path for the mentioned case. Now
we do the same "take lowest inode/offset" logic for all found clones.
Commit is a result of Arne's review.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Make sure to never get in trouble due to the backref_ctx
which was on the stack before.
Commit is a result of Arne's review.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
We only added the parent for the new position of a moved dir.
We also need to add the old parent of the moved dir.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
fs_path_remove is not used at the moment due to a previous patch.
Remove it for now (with #if 0) to avoid compile warnings.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
We missed that check which resultet in all refs with the same name
being reported as first_ref.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
When the current inodes inum is smaller then the inum of the
parent directory strange things were happending due to wrong
path resolution and other bugs. Fix this with a new approach
for the problem.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Here is the big driver core update for 3.7-rc1.
A number of firmware_class.c updates (as you saw a month or so ago), and
some hyper-v updates and some printk fixes as well. All patches that
are outside of the drivers/base area have been acked by the respective
maintainers, and have all been in the linux-next tree for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlBp3vkACgkQMUfUDdst+ylQoACgldktGFgkCLzH+rGYthrXOC5P
9hUAnjmOhdoHlMTL81vWTlH+BrGernym
=khrr
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core merge from Greg Kroah-Hartman:
"Here is the big driver core update for 3.7-rc1.
A number of firmware_class.c updates (as you saw a month or so ago),
and some hyper-v updates and some printk fixes as well. All patches
that are outside of the drivers/base area have been acked by the
respective maintainers, and have all been in the linux-next tree for a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
memory: tegra{20,30}-mc: Fix reading incorrect register in mc_readl()
device.h: Add missing inline to #ifndef CONFIG_PRINTK dev_vprintk_emit
memory: emif: Add ifdef CONFIG_DEBUG_FS guard for emif_debugfs_[init|exit]
Documentation: Fixes some translation error in Documentation/zh_CN/gpio.txt
Documentation: Remove 3 byte redundant code at the head of the Documentation/zh_CN/arm/booting
Documentation: Chinese translation of Documentation/video4linux/omap3isp.txt
device and dynamic_debug: Use dev_vprintk_emit and dev_printk_emit
dev: Add dev_vprintk_emit and dev_printk_emit
netdev_printk/netif_printk: Remove a superfluous logging colon
netdev_printk/dynamic_netdev_dbg: Directly call printk_emit
dev_dbg/dynamic_debug: Update to use printk_emit, optimize stack
driver-core: Shut up dev_dbg_reatelimited() without DEBUG
tools/hv: Parse /etc/os-release
tools/hv: Check for read/write errors
tools/hv: Fix exit() error code
tools/hv: Fix file handle leak
Tools: hv: Implement the KVP verb - KVP_OP_GET_IP_INFO
Tools: hv: Rename the function kvp_get_ip_address()
Tools: hv: Implement the KVP verb - KVP_OP_SET_IP_INFO
Tools: hv: Add an example script to configure an interface
...
Features currently supported:
- 39-bit address space for user and kernel (each)
- 4KB and 64KB page configurations
- Compat (32-bit) user applications (ARMv7, EABI only)
- Flattened Device Tree (mandated for all AArch64 platforms)
- ARM generic timers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)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=buJB
-----END PGP SIGNATURE-----
Merge tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 support from Catalin Marinas:
"Linux support for the 64-bit ARM architecture (AArch64)
Features currently supported:
- 39-bit address space for user and kernel (each)
- 4KB and 64KB page configurations
- Compat (32-bit) user applications (ARMv7, EABI only)
- Flattened Device Tree (mandated for all AArch64 platforms)
- ARM generic timers"
* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (35 commits)
arm64: ptrace: remove obsolete ptrace request numbers from user headers
arm64: Do not set the SMP/nAMP processor bit
arm64: MAINTAINERS update
arm64: Build infrastructure
arm64: Miscellaneous header files
arm64: Generic timers support
arm64: Loadable modules
arm64: Miscellaneous library functions
arm64: Performance counters support
arm64: Add support for /proc/sys/debug/exception-trace
arm64: Debugging support
arm64: Floating point and SIMD
arm64: 32-bit (compat) applications support
arm64: User access library functions
arm64: Signal handling support
arm64: VDSO support
arm64: System calls handling
arm64: ELF definitions
arm64: SMP support
arm64: DMA mapping API
...
make menuconfig for cifs shows multiple entries toward
the end of the list with the incorrect indentation
(probably a bug in Kconfig parsing of items
that are dependant on the module (cifs=m instead of
just CONFIG_CIFS). This patch fixes the indentation
of all but the last entry (CIFS_ACL) which I don't
know how to fix. It also clarifies wording in
two places
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Based on whether the user (on mount command) chooses:
vers=3.0 (for smb3.0 support)
vers=2.1 (for smb2.1 support)
or (with subsequent patch, which will allow SMB2 support)
vers=2.0 (for original smb2.02 dialect support)
send only one dialect at a time during negotiate (we
had been sending a list).
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pull the trivial tree from Jiri Kosina:
"Tiny usual fixes all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
doc: fix old config name of kprobetrace
fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
btrfs: fix the commment for the action flags in delayed-ref.h
btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
vfs: fix kerneldoc for generic_fh_to_parent()
treewide: fix comment/printk/variable typos
ipr: fix small coding style issues
doc: fix broken utf8 encoding
nfs: comment fix
platform/x86: fix asus_laptop.wled_type module parameter
mfd: printk/comment fixes
doc: getdelays.c: remember to close() socket on error in create_nl_socket()
doc: aliasing-test: close fd on write error
mmc: fix comment typos
dma: fix comments
spi: fix comment/printk typos in spi
Coccinelle: fix typo in memdup_user.cocci
tmiofb: missing NULL pointer checks
tools: perf: Fix typo in tools/perf
tools/testing: fix comment / output typos
...
Pull GFS2 updates from Steven Whitehouse:
"The major feature this time is the "rbm" conversion in the resource
group code. The new struct gfs2_rbm specifies the location of an
allocatable block in (resource group, bitmap, offset) form. There are
a number of added helper functions, and later patches then rewrite
some of the resource group code in terms of this new structure. Not
only does this give us a nice code clean up, but it also removes some
of the previous restrictions where extents could not cross bitmap
boundaries, for example.
In addition to that, there are a few bug fixes and clean ups, but the
rbm work is by far the majority of this patch set in terms of number
of changed lines."
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (27 commits)
GFS2: Write out dirty inode metadata in delayed deletes
GFS2: fix s_writers.counter imbalance in gfs2_ail_empty_gl
GFS2: Fix infinite loop in rbm_find
GFS2: Consolidate free block searching functions
GFS2: Get rid of I_MUTEX_QUOTA usage
GFS2: Stop block extents at the end of bitmaps
GFS2: Fix unclaimed_blocks() wrapping bug and clean up
GFS2: Improve block reservation tracing
GFS2: Fall back to ignoring reservations, if there are no other blocks left
GFS2: Fix ->show_options() for statfs slow
GFS2: Use rbm for gfs2_setbit()
GFS2: Use rbm for gfs2_testbit()
GFS2: Eliminate unnecessary check for state > 3 in bitfit
GFS2: Eliminate redundant calls to may_grant
GFS2: Combine functions gfs2_glock_dq_wait and wait_on_demote
GFS2: Combine functions gfs2_glock_wait and wait_on_holder
GFS2: inline __gfs2_glock_schedule_for_reclaim
GFS2: change function gfs2_direct_IO to use a normal gfs2_glock_dq
GFS2: rbm code cleanup
GFS2: Fix case where reservation finished at end of rgrp
...
Commits 5e8830dc85 and 41c4d25f78 introduced a regression into
v3.6-rc1 for ext4 in nodealloc mode, such that mtime updates would not
take place for files modified via mmap if the page was already in the
page cache. This would also affect ext3 file systems mounted using
the ext4 file system driver.
The problem was that ext4_page_mkwrite() had a shortcut which would
avoid calling __block_page_mkwrite() under some circumstances, and the
above two commit transferred the responsibility of calling
file_update_time() to __block_page_mkwrite --- which woudln't get
called in some circumstances.
Since __block_page_mkwrite() only has three callers,
block_page_mkwrite(), ext4_page_mkwrite, and nilfs_page_mkwrite(), the
best way to solve this is to move the responsibility for calling
file_update_time() to its caller.
This problem was found via xfstests #215 with a file system mounted
with -o nodelalloc.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable@vger.kernel.org
Inode is allowed to have empty leaf only if it this is blockless inode.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
punch_hole is the place where we have to wait for all existing writers
(writeback, aio, dio), but currently we simply flush pended end_io request
which is not sufficient. Other issue is that punch_hole performed w/o i_mutex
held which obviously result in dangerous data corruption due to
write-after-free.
This patch performs following changes:
- Guard punch_hole with i_mutex
- Recheck inode flags under i_mutex
- Block all new dio readers in order to prevent information leak caused by
read-after-free pattern.
- punch_hole now wait for all writers in flight
NOTE: XXX write-after-free race is still possible because new dirty pages
may appear due to mmap(), and currently there is no easy way to stop
writeback while punch_hole is in progress.
[ Fixed error return from ext4_ext_punch_hole() to make sure that we
release i_mutex before returning EPERM or ETXTBUSY -- Ted ]
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Selected by __ARCH_WANT_SYS_EXECVE in unistd.h. Requires
* working current_pt_regs()
* *NOT* doing a syscall-in-kernel kind of kernel_execve()
implementation. Using generic kernel_execve() is fine.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
based mostly on arm and alpha versions. Architectures can define
__ARCH_WANT_KERNEL_EXECVE and use it, provided that
* they have working current_pt_regs(), even for kernel threads.
* kernel_thread-spawned threads do have space for pt_regs
in the normal location. Normally that's as simple as switching to
generic kernel_thread() and making sure that kernel threads do *not*
go through return from syscall path; call the payload from equivalent
of ret_from_fork if we are in a kernel thread (or just have separate
ret_from_kernel_thread and make copy_thread() use it instead of
ret_from_fork in kernel thread case).
* they have ret_from_kernel_execve(); it is called after
successful do_execve() done by kernel_execve() and gets normal
pt_regs location passed to it as argument. It's essentially
a longjmp() analog - it should set sp, etc. to the situation
expected at the return for syscall and go there. Eventually
the need for that sucker will disappear, but that'll take some
surgery on kernel_thread() payloads.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
IBM reported a deadlock in select_parent(). This was found to be caused
by taking rename_lock when already locked when restarting the tree
traversal.
There are two cases when the traversal needs to be restarted:
1) concurrent d_move(); this can only happen when not already locked,
since taking rename_lock protects against concurrent d_move().
2) racing with final d_put() on child just at the moment of ascending
to parent; rename_lock doesn't protect against this rare race, so it
can happen when already locked.
Because of case 2, we need to be able to handle restarting the traversal
when rename_lock is already held. This patch fixes all three callers of
try_to_ascend().
IBM reported that the deadlock is gone with this patch.
[ I rewrote the patch to be smaller and just do the "goto again" if the
lock was already held, but credit goes to Miklos for the real work.
- Linus ]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
JFFS2 was designed without thought for OOB bitflips, it seems, but they
can occur and will be reported to JFFS2 via mtd_read_oob()[1]. We don't
want to fail on these transactions, since the data was corrected.
[1] Few drivers report bitflips for OOB-only transactions. With such
drivers, this patch should have no effect.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This patch fixes regression introduced by
"8bdc81c jffs2: get rid of jffs2_sync_super". We submit a delayed work in order
to make sure the write-buffer is synchronized at some point. But we do not
flush it when we unmount, which causes an oops when we unmount the file-system
and then the delayed work is executed.
This patch fixes the issue by adding a "cancel_delayed_work_sync()" infocation
in the '->sync_fs()' handler. This will make sure the delayed work is canceled
on sync, unmount and re-mount. And because VFS always callse 'sync_fs()' before
unmounting or remounting, this fixes the issue.
Reported-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: stable@vger.kernel.org [3.5+]
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jan Kara have spotted interesting issue:
There are potential data corruption issue with direct IO overwrites
racing with truncate:
Like:
dio write truncate_task
->ext4_ext_direct_IO
->overwrite == 1
->down_read(&EXT4_I(inode)->i_data_sem);
->mutex_unlock(&inode->i_mutex);
->ext4_setattr()
->inode_dio_wait()
->truncate_setsize()
->ext4_truncate()
->down_write(&EXT4_I(inode)->i_data_sem);
->__blockdev_direct_IO
->ext4_get_block
->submit_io()
->up_read(&EXT4_I(inode)->i_data_sem);
# truncate data blocks, allocate them to
# other inode - bad stuff happens because
# dio is still in flight.
In order to serialize with truncate dio worker should grab extra i_dio_count
reference before drop i_mutex.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we have enough aggressive DIO readers, truncate and other dio
waiters will wait forever inside inode_dio_wait(). It is reasonable
to disable nonlock DIO read optimization during truncate.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Current serialization will works only for DIO which holds
i_mutex, but nonlocked DIO following race is possible:
dio_nolock_read_task truncate_task
->ext4_setattr()
->inode_dio_wait()
->ext4_ext_direct_IO
->ext4_ind_direct_IO
->__blockdev_direct_IO
->ext4_get_block
->truncate_setsize()
->ext4_truncate()
#alloc truncated blocks
#to other inode
->submit_io()
#INFORMATION LEAK
In order to serialize with unlocked DIO reads we have to
rearrange wait sequence
1) update i_size first
2) if i_size about to be reduced wait for outstanding DIO requests
3) and only after that truncate inode blocks
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Inode's block defrag and ext4_change_inode_journal_flag() may
affect nonlocked DIO reads result, so proper synchronization
required.
- Add missed inode_dio_wait() calls where appropriate
- Check inode state under extra i_dio_count reference.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Current unwritten extent conversion state-machine is very fuzzy.
- For unknown reason it performs conversion under i_mutex. What for?
My diagnosis:
We already protect extent tree with i_data_sem, truncate and punch_hole
should wait for DIO, so the only data we have to protect is end_io->flags
modification, but only flush_completed_IO and end_io_work modified this
flags and we can serialize them via i_completed_io_lock.
Currently all these games with mutex_trylock result in the following deadlock
truncate: kworker:
ext4_setattr ext4_end_io_work
mutex_lock(i_mutex)
inode_dio_wait(inode) ->BLOCK
DEADLOCK<- mutex_trylock()
inode_dio_done()
#TEST_CASE1_BEGIN
MNT=/mnt_scrach
unlink $MNT/file
fallocate -l $((1024*1024*1024)) $MNT/file
aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file
sleep 2
truncate -s 0 $MNT/file
#TEST_CASE1_END
Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286
This patch makes state machine simple and clean:
(1) xxx_end_io schedule final extent conversion simply by calling
ext4_add_complete_io(), which append it to ei->i_completed_io_list
NOTE1: because of (2A) work should be queued only if
->i_completed_io_list was empty, otherwise the work is scheduled already.
(2) ext4_flush_completed_IO is responsible for handling all pending
end_io from ei->i_completed_io_list
Flushing sequence consists of following stages:
A) LOCKED: Atomically drain completed_io_list to local_list
B) Perform extents conversion
C) LOCKED: move converted io's to to_free list for final deletion
This logic depends on context which we was called from.
D) Final end_io context destruction
NOTE1: i_mutex is no longer required because end_io->flags modification
is protected by ei->ext4_complete_io_lock
Full list of changes:
- Move all completion end_io related routines to page-io.c in order to improve
logic locality
- Move open coded logic from various xx_end_xx routines to ext4_add_complete_io()
- remove EXT4_IO_END_FSYNC
- Improve SMP scalability by removing useless i_mutex which does not
protect io->flags anymore.
- Reduce lock contention on i_completed_io_lock by optimizing list walk.
- Rename ext4_end_io_nolock to end4_end_io and make it static
- Check flush completion status to ext4_ext_punch_hole(). Because it is
not good idea to punch blocks from corrupted inode.
Changes since V3 (in request to Jan's comments):
Fall back to active flush_completed_IO() approach in order to prevent
performance issues with nolocked DIO reads.
Changes since V2:
Fix use-after-free caused by race truncate vs end_io_work
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_set_io_unwritten_flag() will increment i_unwritten counter, so
once we mark end_io with EXT4_END_IO_UNWRITTEN we have to revert it back
on error path.
- add missed error checks to prevent counter leakage
- ext4_end_io_nolock() will clear EXT4_END_IO_UNWRITTEN flag to signal
that conversion finished.
- add BUG_ON to ext4_free_end_io() to prevent similar leakage in future.
Visible effect of this bug is that unaligned aio_stress may deadlock
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
AIO/DIO prefix is wrong because it account unwritten extents which
also may be scheduled from buffered write endio
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Generic inode has unused i_private pointer which may be used as cur_aio_dio
storage.
TODO: If cur_aio_dio will be passed as an argument to get_block_t this allow
to have concurent AIO_DIO requests.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Rebased and resending the patch.
Path based queries can fail for lack of access, especially during lookup
during open.
open itself would actually succeed becasue of back up intent bit
but queries (either path or file handle based) do not have a means to
specifiy backup intent bit.
So query the file info during lookup using
trans2 / findfirst / file_id_full_dir_info
to obtain file info as well as file_id/inode value.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Currently it does not do so if the RPC call failed to start. Fix is to
move the decrement of plh_block_lgets into nfs4_layoutreturn_release.
Also remove a redundant test of task->tk_status in nfs4_layoutreturn_done:
if lrp->res.lrs_present is set, then obviously the RPC call succeeded.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Failure of the layoutreturn allocation fails is not a good reason to
mark the pnfs_layout_hdr as having failed a layoutget or i/o. Just
exit cleanly.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It serves no purpose that the test for whether or not we have valid
layout segments doesn't already serve.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Once all the affected layout segments have been freed up, clear the
NFS_LAYOUT_BULK_RECALL flag so that we can reuse the pnfs_layout_hdr
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We already have a mechanism for blocking LAYOUTGET by means of the
plh_block_lgets counter. The only "service" that NFS_LAYOUT_DESTROYED
provides at this point is to block layoutget once the layout segment
list is empty, which basically means that you have to wait until
the pnfs_layout_hdr is destroyed before you can do pNFS on that file
again.
This patch enables the reuse of the pnfs_layout_hdr if the layout
segment list is empty.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that the reference count for pnfs_layout_hdr reverts to the
original value after a call to pnfs_layout_remove_lseg().
Note that the caller is expected to hold a reference to the struct
pnfs_layout_hdr.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There is no longer a need to use pnfs_free_lseg_list(). Just call
pnfs_free_lseg() directly.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the code into pnfs_free_layout_hdr(), and add checks to
get_layout_by_fh_locked to ensure that they don't reference a layout
that is being freed.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
None of the existing pNFS layout drivers seem to require the inode
to be locked while they free the layout header.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Each layout segment already holds a reference to the pnfs_layout_hdr,
so there is no need to hold an extra reference that is released once
the last layout segment is freed.
Ensure that pnfs_find_alloc_layout() always returns a reference
to the pnfs_layout_hdr, which will be matched by the final call to
pnfs_put_layout_hdr() in pnfs_update_layout().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The latter name is more descriptive of the actual function.
Also rename pnfs_insert_layout to pnfs_layout_insert_lseg.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Instead of resetting the inode MDS threshold counters when we mark
the layout for destruction, do it as part of freeing the layout.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In all cases where we set NFS_LAYOUT_INVALID, we also set NFS_LAYOUT_DESTROYED.
Furthermore, in all cases where we test for NFS_LAYOUT_INVALID, we should
also be testing for NFS_LAYOUT_DESTROYED, since the latter means that
we hold no valid layout segments.
Ergo the two are redundant.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we sleep after dropping the inode->i_lock, then we are no longer
atomic with respect to the rpc_wake_up() call in pnfs_layout_remove_lseg().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If pnfs_layout_io_test_failed() authorises a retry of the failed layoutgets,
we should clear the existing layout segments so that we start afresh. Do
this in pnfs_layout_io_set_failed().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We want to cache the pnfs_layout_hdr after a layoutget or i/o
failure so that pnfs_update_layout() can find it and know when
it is time to retry.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we exit after the call to pnfs_find_alloc_layout(), we have to ensure
that we put the struct pnfs_layout_hdr.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In cases where the pNFS data server is just temporarily out of service,
we want to mark it as such, and then try again later. Typically that will
be in cases of network connection errors etc.
This patch allows us to mark the devices as being "unavailable" for such
transient errors, and will make them available for retries after a
2 minute timeout period.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we had to fall back to read/write through MDS, then assume that we should
retry pNFS after a suitable timeout period.
The following patch sets a timeout of 2 minutes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Dereferencing nfsi->layout in order to read plh_flags without holding
a spin lock is bug prone. Furthermore, the dprintk() tells you nothing
about whether or not the call succeeded.
Replace it with something that tells you about whether or not a valid
layout segment was returned for the inode in question.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that we do return errors from nfs4_proc_layoutget() and that we
don't mark the layout as having failed if the error was due to a
signal or resource problem on the client side.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This is to ensure that we don't clear the NFS_CONTEXT_RESEND_WRITES
flag while there are still writes that haven't been resent.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the server reboots before it can commit the unstable writes to disk,
then nfs_commit_release_pages() will detect this when it compares the
verifier returned by COMMIT to the one returned by WRITE. When this
happens, the client needs to resend those writes in order to guarantee
that they make it to stable storage.
This patch adds a signalling mechanism to notify fsync() that it
needs to retry all writes before it can exit.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We want to be able to pass on the information that the page was not
dirtied under a lock. Instead of adding a flag parameter, do this
by passing a pointer to a 'struct nfs_lock_owner' that may be NULL.
Also reuse this structure in struct nfs_lock_context to carry the
fl_owner_t and pid_t.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We want to be able to distinguish between allocation failures, and
the case where the lock context is not needed (because there are no
locks).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Conflicts:
drivers/net/team/team.c
drivers/net/usb/qmi_wwan.c
net/batman-adv/bat_iv_ogm.c
net/ipv4/fib_frontend.c
net/ipv4/route.c
net/l2tp/l2tp_netlink.c
The team, fib_frontend, route, and l2tp_netlink conflicts were simply
overlapping changes.
qmi_wwan and bat_iv_ogm were of the "use HEAD" variety.
With help from Antonio Quartulli.
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the idmapper upcall data to verify that the legacy idmapper daemon
is indeed responding to an upcall that we sent.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
Replace the BUG_ON(idmap->idmap_key_cons != NULL) with a
WARN_ON_ONCE(). Then get rid of the ACCESS_ONCE(idmap->idmap_key_cons).
Then add helper functions for starting, finishing and aborting the
legacy upcall.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
Pull vfs fixes from Al Viro:
"A couple of fixes; one for automount/lazy umount race, another a
classic "we don't protect the refcount transition to zero with the
lock that protects looking for object in hash" kind of crap in lockd."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
close the race in nlmsvc_free_block()
do_add_mount()/umount -l races
The use of ACCESS_ONCE() is wrong, since the various routines that set/clear
idmap->idmap_key_cons should be strictly ordered w.r.t. each other, and
the idmap->idmap_mutex ensures that only one thread at a time may be in
an upcall situation.
Also replace the BUG_ON()s with WARN_ON_ONCE() where appropriate.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
discard bio hasn't data attached. We hit a BUG_ON with such bio. This makes
bio_split works for such bio.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iQEcBAABAgAGBQJQX7MuAAoJEHm+PkMAQRiG0h0IAJURkrMCAQUxA+Ik66ReH89s
LQcVd0U9uL4UUOi7f5WR64Vf9Cfu6VVGX9ZKSvjpNskvlQaUQPMIt4pMe6g4X4dI
u0bApEy4XZz3nGabUAghIU8jJ8cDmhCG6kPpSiS7pi7KHc0yIa4WFtJRrIpGaIWT
xuK38YOiOHcSDRlLyWZzainMncQp/ixJdxnqVMTonkVLk0q0b84XzOr4/qlLE5lU
i+TsK3PRKdQXgvZ4CebL+srPBwWX1dmgP3VkeBloQbSSenSeELICbFWavn2ml+sF
GXi4dO93oNquL/Oy5SwI666T4uNcrRPaS+5X+xSZgBW/y2aQVJVJuNZg6ZP/uWk=
=0v2l
-----END PGP SIGNATURE-----
Merge tag 'v3.6-rc7' into next
Linux 3.6-rc7
Requested by David Howells so he can merge his key susbsystem work into
my tree with requisite -linus changesets.
"Search list for X" sounds like you're trying to find X on a list.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert cpu_to_leXX(leXX_to_cpu(E1) + E2) to use leXX_add_cpu().
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When ext4_bread() returns NULL and err is set to zero, this means
there is no phyical block mapped to the specified logical block
number. (Previous to commit 90b0a97323, err was uninitialized in this
case, which caused other problems.)
The directory handling routines use ext4_bread() in many places, the
fact that ext4_bread() now returns NULL with err set to zero could
cause problems since a number of these functions will simply return
the value of err if the result of ext4_bread() was the NULL pointer,
causing the caller of the function to think that the function was
successful.
Since directories should never contain holes, this case can only
happen if the file system is corrupted. This commit audits all of the
callers of ext4_bread(), and makes sure they do the right thing if a
hole in a directory is found by ext4_bread().
Some ext4_bread() callers did not need any changes either because they
already had its own hole detector paths.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In the check code above, if orig_start != donor_start, we would
return -EINVAL. So here, orig_start should be equal with donor_start.
Remove the redundant check here.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the file system contains errors and it is being mounted read-only,
don't clear the orphan list. We should minimize changes to the file
system if it is mounted read-only.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
and remove redundant (rsp == NULL) checks after SendReceive2.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
ext4 users of data=journal mode with blocksize < pagesize were
occasionally hitting assertion failure in
jbd2_journal_commit_transaction() checking whether the transaction has
at least as many credits reserved as buffers attached. The core of the
problem is that when a file gets truncated, buffers that still need
checkpointing or that are attached to the committing transaction are
left with buffer_mapped set. When this happens to buffers beyond i_size
attached to a page stradding i_size, subsequent write extending the file
will see these buffers and as they are mapped (but underlying blocks
were freed) things go awry from here.
The assertion failure just coincidentally (and in this case luckily as
we would start corrupting filesystem) triggers due to journal_head not
being properly cleaned up as well.
We fix the problem by unmapping buffers if possible (in lots of cases we
just need a buffer attached to a transaction as a place holder but it
must not be written out anyway). And in one case, we just have to bite
the bullet and wait for transaction commit to finish.
CC: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When the EXT4_IOC_MOVE_EXT ioctl() fails on bigalloc file systems, we
should jump to the 'mext_out' label to release the donor file reference.
Signed-off-by: Djalal Harouni <tixxdz@opendz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
With a minor tweaks regarding minimum extent size to discard and
discarded bytes reporting the FITRIM can be enabled on bigalloc file
system and it works without any problem.
This patch fixes minlen handling and discarded bytes reporting to
take into consideration bigalloc enabled file systems and finally
removes the restriction and allow FITRIM to be used on file system with
bigalloc feature enabled.
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In !CORE_DUMP_USE_REGSET case, if elf_note_info_init fails to allocate
memory for info->fields, it frees already allocated stuff and returns
error to its caller, fill_note_info. Which in turn returns error to its
caller, elf_core_dump. Which jumps to cleanup label and calls
free_note_info, which will happily try to free all info->fields again.
BOOM.
This is the fix.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Venu Byravarasu <vbyravarasu@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Each iteration of d_delete we reload inode from dentry->d_inode and
then call S_ISDIR(inode-i_mode), so inode cannot possibly be NULL
shortly afterwards unless something went horribly wrong.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Code tracking when transaction needs to be committed on fdatasync(2) forgets
to handle a situation when only inode's i_size is changed. Thus in such
situations fdatasync(2) doesn't force transaction with new i_size to disk
and that can result in wrong i_size after a crash.
Fix the issue by updating inode's i_datasync_tid whenever its size is
updated.
CC: <stable@vger.kernel.org> # >= 2.6.32
Reported-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Signed-off-by: Jan Kara <jack@suse.cz>
ext4_special_inode_operations have their own ifdef CONFIG_EXT4_FS_XATTR
to mask those methods. And ext4_iget also always sets it, so there is
an inconsistency.
Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
get_write_access() is needed for nfsd, not binfmt_aout (the latter
has no business doing anything of that kind, of course)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch converts /proc/pid/fdinfo/ handling routines to seq-file which
is needed to extend seq operations and plug in auxiliary fdinfo provides
from subsystems like eventfd/eventpoll/fsnotify.
Note the proc_fd_link no longer call for proc_fd_info, simply because
the guts of proc_fd_info() got merged into ->show() of that seq_file
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch prepares the ground for further extension of
/proc/pid/fd[info] handling code by moving fdinfo handling
code into fs/proc/fd.c.
I think such move makes both fs/proc/base.c and fs/proc/fd.c
easier to read.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
CC: Al Viro <viro@ZenIV.linux.org.uk>
CC: Alexey Dobriyan <adobriyan@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: James Bottomley <jbottomley@parallels.com>
CC: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
CC: Alexey Dobriyan <adobriyan@gmail.com>
CC: Matthew Helsley <matt.helsley@gmail.com>
CC: "J. Bruce Fields" <bfields@fieldses.org>
CC: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
descriptor-related parts of daemonize, done right. As the
result we simplify the locking rules for ->files - we
hold task_lock in *all* cases when we modify ->files.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
iterates through the opened files in given descriptor table,
calling a supplied function; we stop once non-zero is returned.
Callback gets struct file *, descriptor number and const void *
argument passed to iterator. It is called with files->file_lock
held, so it is not allowed to block.
tty_io, netprio_cgroup and selinux flush_unauthorized_files()
converted to its use.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove unused function ext4_ext_check_cache() and merge the code back to
the ext4_ext_in_cache().
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Similar situation to that of __alloc_fd(); do not use unless you
really have to. You should not touch any descriptor table other
than your own; it's a sure sign of a really bad API design.
As with __alloc_fd(), you *must* use a first-class reference to
struct files_struct; something obtained by get_files_struct(some task)
(let alone direct task->files) will not do. It must be either
current->files, or obtained by get_files_struct(current) by the
owner of that sucker and given to you.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
At that point nobody can see us anyway; everything that
looks at files_fdtable(files) is separated from the
guts of put_files_struct(files) - either since files is
current->files or because we fetched it under task_lock()
and hadn't dropped that yet, or because we'd bumped
files->count while holding task_lock()...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Essentially, alloc_fd() in a files_struct we own a reference to.
Most of the time wanting to use it is a sign of lousy API
design (such as android/binder). It's *not* a general-purpose
interface; better that than open-coding its guts, but again,
playing with other process' descriptor table is a sign of bad
design.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... except for one in android, where the check is different
and already done in caller. No need to recalculate rlimit
many times in alloc_fd() either.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* do copy_to_user() before prepare_for_access_response(); that kills
the need in remove_access_response().
* don't do fd_install() until we are past the last possible failure
exit. Don't use sys_close() on cleanup side - just put_unused_fd()
and fput(). Less racy that way...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
don't mess with sys_close() if copy_to_user() fails; just postpone
fd_install() until we know it hasn't.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The only difference between autofs_dev_ioctl_fd_install() and
fd_install() is __set_close_on_exec() done by the latter. Just
use get_unused_fd_flags(O_CLOEXEC) to allocate the descriptor
and be done with that...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Using kmem_cache_zalloc() instead of kmem_cache_alloc() and memset().
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
As inode64 is the default option now, and was also made remountable
previously, inode32 can also be remounted on-the-fly when it is needed.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
To make inode32 a remountable option, xfs_set_inode32() should be able
to make a transition from inode64 option, disabling inode allocation on
higher AGs.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
With the changes made on xfs_set_inode64(), to make it behave as
xfs_set_inode32() (now leaving to the caller the responsibility to update
mp->m_maxagi), we use the return value of xfs_set_inode64() to update
mp->m_maxagi during remount.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Add xfs_set_inode32() to be used to enable inode32 allocation mode. this
will reduce the amount of duplicated code needed to mount/remount a
filesystem with inode32 option. This patch also changes
xfs_set_inode64() to return the maximum AG number that inodes can be
allocated instead of set mp->m_maxagi by itself, so that the behaviour
is the same as xfs_set_inode32(). This simplifies code that calls these
functions and needs to know the maximum AG that inodes can be allocated
in.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
since 64-bit inodes can be accessed while using inode32, and these can
also be used on 32-bit kernels, there is no reason to still keep inode32
as the default mount option. If the filesystem cannot handle 64bit
inode numbers (i.e CONFIG_LBDAF is not enabled and BITS_PER_LONG == 32),
XFS_MOUNT_SMALL_INUMS will still be set by default, so inode64 is not an
unconditional default value.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_ialloc_next_ag() currently resets m_agirotor when it is equal to
m_maxagi:
if (++mp->m_agirotor == mp->m_maxagi)
mp->m_agirotor = 0;
But, if for some reason mp->m_maxagi changes to a lower value than
current m_agirotor, this condition will never be true, causing
m_agirotor to exceed the maximum allowed value (m_maxagi).
This implies mainly during lookups for xfs_perag structs in its radix
tree, since the agno value used for the lookup is based on m_agirotor.
An out-of-range m_agirotor may cause a lookup failure which in case will
return NULL.
As an example, the value of m_maxagi is decreased during
inode64->inode32 remount process, case where I've found this problem.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Actually, there is no reason about why a user must umount and mount a
XFS filesystem to enable 'inode64' option. So, this patch makes this a
remountable option.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
ERRnoresource is an ERRSRV level (aka server-side) error and means "No
resources currently available for request". Currently that maps to POSIX
-ENOBUFS. No NT errors map to it currently.
NT_STATUS_INSUFFICIENT_RESOURCES and NT_STATUS_INSUFF_SERVER_RESOURCES
are also similar in meaning. Currently the client maps those to
ERRnomem, which maps to -ENOMEM in POSIX.
All of these mappings seem to be quite wrong to me and are confusing for
users. All of the above errors indicate problems on the server, not the
client. Reporting -ENOMEM or -ENOBUFS implies that the client is running
out of resources.
This patch changes those mappings. The NT_* errors are changed to map to
the SRV level ERRnoresource. That error is in turn changed to return
-EREMOTEIO which is the only POSIX error I could find that conveys that
something went wrong on the server. While we're at it, change the SMB2
equivalent error to return the same.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Uninitialized extent may became initialized(parallel writeback task)
at any moment after we drop i_data_sem, so we have to recheck extent's
state after we hold page's lock and i_data_sem.
If we about to change page's mapping we must hold page's lock in order to
serialize other users.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Non-full list of bugs:
1) uninitialized extent optimization does not hold page's lock,
and simply replace brunches after that writeback code goes
crazy because block mapping changed under it's feets
kernel BUG at fs/ext4/inode.c:1434! ( 288'th xfstress)
2) uninitialized extent may became initialized right after we
drop i_data_sem, so extent state must be rechecked
3) Locked pages goes uptodate via following sequence:
->readpage(page); lock_page(page); use_that_page(page)
But after readpage() one may invalidate it because it is
uptodate and unlocked (reclaimer does that)
As result kernel bug at include/linux/buffer_head.c:133!
4) We call write_begin() with already opened stansaction which
result in following deadlock:
->move_extent_per_page()
->ext4_journal_start()-> hold journal transaction
->write_begin()
->ext4_da_write_begin()
->ext4_nonda_switch()
->writeback_inodes_sb_if_idle() --> will wait for journal_stop()
5) try_to_release_page() may fail and it does fail if one of page's bh was
pinned by journal
6) If we about to change page's mapping we MUST hold it's lock during entire
remapping procedure, this is true for both pages(original and donor one)
Fixes:
- Avoid (1) and (2) simply by temproraly drop uninitialized extent handling
optimization, this will be reimplemented later.
- Fix (3) by manually forcing page to uptodate state w/o dropping it's lock
- Fix (4) by rearranging existing locking:
from: journal_start(); ->write_begin
to: write_begin(); journal_extend()
- Fix (5) simply by checking retvalue
- Fix (6) by locking both (original and donor one) pages during extent swap
with help of mext_page_double_lock()
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Proper block swap for inodes with full journaling enabled is
truly non obvious task. In order to be on a safe side let's
explicitly disable it for now.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
- Remove usless checks, because it is too late to check that inode != NULL
at the moment it was referenced several times.
- Double lock routines looks very ugly and locking ordering relays on
order of i_ino, but other kernel code rely on order of pointers.
Let's make them simple and clean.
- check that inodes belongs to the same SB as soon as possible.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
blkdev_mmap() isn't used outside of fs/block_dev.c, mark it as
static.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This avoids cache line bouncing when many processes lock the semaphore
for read.
New percpu lock implementation
The lock consists of an array of percpu unsigned integers, a boolean
variable and a mutex.
When we take the lock for read, we enter rcu read section, check for a
"locked" variable. If it is false, we increase a percpu counter on the
current cpu and exit the rcu section. If "locked" is true, we exit the
rcu section, take the mutex and drop it (this waits until a writer
finished) and retry.
Unlocking for read just decreases percpu variable. Note that we can
unlock on a difference cpu than where we locked, in this case the
counter underflows. The sum of all percpu counters represents the number
of processes that hold the lock for read.
When we need to lock for write, we take the mutex, set "locked" variable
to true and synchronize rcu. Since RCU has been synchronized, no
processes can create new read locks. We wait until the sum of percpu
counters is zero - when it is, there are no readers in the critical
section.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The kernel may crash when block size is changed and I/O is issued
simultaneously.
Because some subsystems (udev or lvm) may read any block device anytime,
the bug actually puts any code that changes a block device size in
jeopardy.
The crash can be reproduced if you place "msleep(1000)" to
blkdev_get_blocks just before "bh->b_size = max_blocks <<
inode->i_blkbits;".
Then, run "dd if=/dev/ram0 of=/dev/null bs=4k count=1 iflag=direct"
While it is waiting in msleep, run "blockdev --setbsz 2048 /dev/ram0"
You get a BUG.
The direct and non-direct I/O is written with the assumption that block
size does not change. It doesn't seem practical to fix these crashes
one-by-one there may be many crash possibilities when block size changes
at a certain place and it is impossible to find them all and verify the
code.
This patch introduces a new rw-lock bd_block_size_semaphore. The lock is
taken for read during I/O. It is taken for write when changing block
size. Consequently, block size can't be changed while I/O is being
submitted.
For asynchronous I/O, the patch only prevents block size change while
the I/O is being submitted. The block size can change when the I/O is in
progress or when the I/O is being finished. This is acceptable because
there are no accesses to block size when asynchronous I/O is being
finished.
The patch prevents block size changing while the device is mapped with
mmap.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When performing an online resize, we add a bunch of groups at one time
in ext4_flex_group_add, so in most cases a lot of group descriptors
will be in the same group block. But in the end of this function,
update_backups will be called for every group descriptor and the same
block will be copied and journalled again and again. It is really a
waste.
Fix things so we only update a particular bg descriptor block once and
skip subsequent updates of the same block.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
bh_submit_read() is responsible for unlock bh on endio. In addition,
we need to use bh_uptodate_or_lock() to avoid races.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Wrap the use of TIOCSRS485 and TIOCGRS485 in #ifdef so that we avoid
adding undefined IOCTLs to the ioctl pointer list as compatible
ioctls.
This change was motivated by a build error on a MIPS build.
tree: git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
tty-next
head: ac57e7f38e
commit: 84c3b84860 [10/16] compat_ioctl:
Add RS-485 IOCTLs to the list
config: mips-fuloong2e_defconfig
All related error/warning messages:
fs/compat_ioctl.c:869:1: error: 'TIOCSRS485' undeclared here (not in a
function)
fs/compat_ioctl.c:870:1: error: 'TIOCGRS485' undeclared here (not in a
function)
vim +869 fs/compat_ioctl.c
863 COMPATIBLE_IOCTL(TIOCSPGRP)
864 COMPATIBLE_IOCTL(TIOCGPGRP)
865 COMPATIBLE_IOCTL(TIOCGPTN)
866 COMPATIBLE_IOCTL(TIOCSPTLCK)
867 COMPATIBLE_IOCTL(TIOCSERGETLSR)
868 COMPATIBLE_IOCTL(TIOCSIG)
> 869 COMPATIBLE_IOCTL(TIOCSRS485)
870 COMPATIBLE_IOCTL(TIOCGRS485)
871 #ifdef TCGETS2
872 COMPATIBLE_IOCTL(TCGETS2)
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jaeden Amero <jaeden.amero@ni.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In nfs4_create_sec_client, 'flavor' can hold a negative error
code (returned from nfs4_negotiate_security), even though it
is an 'enum' and hence unsigned.
The code is careful to cast it to an (int) before testing if it
is negative, however it doesn't cast to an (int) before calling
ERR_PTR.
On a machine where "void*" is larger than "int", this results in
the unsigned equivalent of -1 (e.g. 0xffffffff) being converted
to a pointer. Subsequent code determines that this is not
negative, and so dereferences it with predictable results.
So: cast 'flavor' to a (signed) int before passing to ERR_PTR.
cc: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In case of error, the function rpcauth_create() returns ERR_PTR()
and never returns NULL pointer. The NULL test in the return value
check should be replaced with IS_ERR().
dpatch engine is used to auto generated this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
...and make the default cache=strict as promised for 3.7.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
and add missed increments of failed async read and write requests.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
by making it __le64 rather than __u64 in FILE_AL_INFO structure.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Some trivial endian fixes for the SMB2 code. One
warning remains which I asked Pavel to look at.
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Now that the merge of the remaining pieces needed for
SMB2 (SMB2.1 dialect) are in, and most test cases pass,
we can consider SMB2.1 EXPERIMENTAL rather than "BROKEN."
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
With SMB2 support, update from version 1.79 to 2.0 to make
it easier for users to recognize which version has SMB2 support.
Signed-off-by: Steve French <sfrench@us.ibm.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
FL_CLOSE is quite common when you close a file on which you hold a
lock. The spurious "Unknown lock flags" message in cFYI is
confusing in this case.
Reported-by: Alexander Bokovoy <abokovoy@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The string for "unc=" in /proc/mounts needs to be escaped. The current
behaviour can create problems in cases when mounting a share starting
with a number.
example:
>mount -t cifs -o username=test,password=x vm140-31:/17000-test /mnt
>mount -o remount,password=x /mnt
mount error: could not resolve address for vm140-31x00-test: Unknown
error
The sub-string "\170" which is part of the unc for the mount above in
/proc/mounts is interpreted as character'x' in the case above. Escaping
the string fixes the problem.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Rename inode pointers for better clarity. Move the d_instantiate call to
the end of the function to prevent other tasks from seeing it before
we've finished constructing it. Since we should have exclusive access to
the inode at this point, remove the spinlock around i_nlink update.
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Now we walk though cifsFileInfo's list for every incoming lease
break and look for an equivalent there. That approach misses lease
breaks that come just after an open response - we don't have time
to populate new cifsFileInfo structure to the list. Fix this by
adding new list of pending opens and look for a lease there if we
didn't find it in the list of cifsFileInfo structures.
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
When we have a file opened with read oplock and we are writing a data
to this file, we need to store the data in the cache and then send to
the server to ensure that the next read operation will get a coherent
data.
Also mark it as CONFIG_CIFS_SMB2 because it's more suitable for SMB2
code but can fix some CIFS problems too (when server delays sending
an oplock break after a write request). We can drop this ifdefs
dependence in future.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Currently CIFS code accept read/write ops on mandatory locked area
when two processes use the same file descriptor - it's wrong.
Fix this by serializing io and brlock operations on the inode.
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
and allow several processes to walk through the lock list and read
can_cache_brlcks value if they are not going to modify them.
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Now we need to lock/unlock a spinlock while processing brlock ops
on the inode. Move brlocks of a fid to a separate list and attach
all such lists to the inode. This let us not hold a spinlock.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Now that we aren't abusing the kmap address space, there's no need for
this lock or to impose a limit on the rsize.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Replace the "marshal_iov" function with a "read_into_pages" function.
That function will copy the read data off the socket and into the
pages array, kmapping and reading pages one at a time.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
We'll need an array to put into a smb_rqst, so convert this into an array
instead of (ab)using the lru list_head.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Eventually, we're going to want to append a list of pages to
cifs_readdata instead of a list of kvecs. To prepare for that, turn
the kvec array allocation into a separate one and just keep a
pointer to it in the readdata.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Now that we're using TCP_CORK on the socket, there's no value in
continuting to support this option. Schedule it for removal in 3.9.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Now that we're not kmapping so much at once, there's no need to cap
the wsize at the amount that can be simultaneously kmapped.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
For now, none of the callers populate rq_pages. That will be done for
writes in a later patch. While we're at it, change the prototype of
setup_async_request not to need a return pointer argument. Just
return the pointer to the mid_q_entry or an ERR_PTR.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Use the smb_send_rqst helper function to kmap each page in the array
and update the hash for that chunk.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Add code that allows smb_send_rqst to send an array of pages after the
initial kvec array has been sent. For now, we simply kmap the page
array and send it using the standard smb_send_kvec function. Eventually,
we may want to convert this code to use kernel_sendpage under the hood
and avoid the kmap altogether for the page data.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
We want to send SMBs as "atomically" as possible. Prior to sending any
data on the socket, cork it to make sure that no non-full frames go
out. Afterward, uncork it to make sure all of the data gets pushed out
to the wire.
Note that this more or less renders the socket=TCP_NODELAY mount option
obsolete. When TCP_CORK and TCP_NODELAY are used on the same socket,
TCP_NODELAY is essentially ignored.
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Again, just a change in the arguments and some function renaming here.
In later patches, we'll change this code to deal with page arrays.
In this patch, we add a new smb_send_rqst wrapper and have smb_sendv
call that. Then we move most of the existing smb_sendv code into a new
function -- smb_send_kvec. This seems a little redundant, but later
we'll flesh this out to deal with arrays of pages.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
We need a way to represent a call to be sent on the wire that does not
require having all of the page data kmapped. Behold the smb_rqst struct.
This new struct represents an array of kvecs immediately followed by an
array of pages.
Convert the signing routines to use these structs under the hood and
turn the existing functions for this into wrappers around that. For now,
we're just changing these functions to take different args. Later, we'll
teach them how to deal with arrays of pages.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Use hmac-sha256 and rather than hmac-md5 that is used for CIFS/SMB.
Signature field in SMB2 header is 16 bytes instead of 8 bytes.
Automatically enable signing by client when requested by the server
when signing ability is available to the client.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
and make cifs_get_file_info(_unix) calls static.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
This is help us to extend the code for future protocols that can use
another fid mechanism (as SMB2 that has it divided into two parts:
persistent and violatile).
Also rename variables and refactor the code around the changes.
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If a dirty GFS2 inode was being deleted but was in use by another node, its
metadata was not getting written out before GFS2 checked for dirty buffers in
gfs2_ail_flush(). GFS2 was relying on inode_go_sync() to write out the
metadata when the other node tried to free the file, but it failed the error
check before it got that far. This patch writes out the metadata before calling
gfs2_ail_flush()
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
gfs2_ail_empty_gl() contains an "inline version" of gfs2_trans_begin(),
so it needs an explicit sb_start_intwrite() as well, to balance the
sb_end_intwrite() which will be called by gfs2_trans_end().
With this, xfstest 068 passes on lock_nolock local gfs2.
Without it, we reach a writer count of -1 and get stuck.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes an infinite loop in gfs2_rbm_find that was introduced
by the previous patch. The problem occurred when the length was less
than 3 but the rbm block was byte-aligned, causing it to improperly
return a extent length of zero, which caused it to spin.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Tested-by: Barry Marson <bmarson@redhat.com>
With the recently added block reservation code, an additional function
was added to search for free blocks. This had a restriction of only being
able to search for aligned extents of free blocks. As a result the
allocation patterns when reserving blocks were suboptimal when the
existing allocation of blocks for an inode was not aligned to the same
boundary.
This patch resolves that problem by adding the ability for gfs2_rbm_find
to search for extents of a particular minimum size. We can then use
gfs2_rbm_find for both looking for reservations, and also looking for
free blocks on an individual basis when we actually come to do the
allocation later on. As a result we only need a single set of code
to deal with both situations.
The function gfs2_rbm_from_block() is moved up rgrp.c so that it
occurs before all of its callers.
Many thanks are due to Bob for helping track down the final issue in
this patch. That fix to the rb_tree traversal and to not share
block reservations from a dirctory to its children is included here.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
GFS2 uses i_mutex on its system quota inode to synchronize writes to
quota file. Since this is an internal inode to GFS2 (not part of directory
hiearchy or visible by user) we are safe to define locking rules for it. So
let's just get it its own locking class to make it clear.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch stops multiple block allocations if a nonzero
return code is received from gfs2_rbm_from_block. Without
this patch, if enough pressure is put on the file system,
you get a kernel warning quickly followed by:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffffa04f47e8>] gfs2_alloc_blocks+0x2c8/0x880 [gfs2]
With this patch, things run normally.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When rgd->rd_free_clone is less than rgd->rd_reserved, the
unclaimed_blocks() calculation would wrap and produce
incorrect results. This patch checks for this condition
when this function is called from gfs2_mblk_search()
In addition, the use of this particular function in other
places in the code has been dropped by means of a general
clean up of gfs2_inplace_reserve(). This function is now
much easier to follow.
Also the setting of the rgd->rd_last_alloc field is corrected.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch improves the tracing of block reservations by
removing some corner cases and also providing more useful
detail in the traces.
A new field is added to the reservation structure to contain
the inode number. This is used since in certain contexts it is
not possible to access the inode itself to obtain this information.
As a result we can then display the inode number for all tracepoints
and also in case we dump the resource group.
The "del" tracepoint operation has been removed. This could be called
with the reservation rgrp set to NULL. That resulted in not printing
the device number, and thus making the information largely useless
anyway. Also, the conditional on the rgrp being NULL can then be
removed from the tracepoint. After this change, all the block
reservation tracepoint calls will be called with the rgrp information.
The existing ins,clm and tdel calls to the block reservation tracepoint
are sufficient to track the entire life of the block reservation.
In gfs2_block_alloc() the error detection is updated to print out
the inode number of the problematic inode. This can then be compared
against the information in the glock dump,tracepoints, etc.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When we get to the stage of allocating blocks, we know that the
resource group in question must contain enough free blocks, otherwise
gfs2_inplace_reserve() would have failed. So if we are left with only
free blocks which are reserved, then we must use those. This can happen
if another node has sneeked in and use some blocks reserved on this
node, for example. Generally this will happen very rarely and only
when the resouce group is nearly full.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The ->show_options() function for GFS2 was not correctly displaying
the value when statfs slow in in use.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: Milos Jakubicek <xjakub@fi.muni.cz>
Use the rbm structure for gfs2_setbit() in order to simplify the
arguments to the function. We have to add a bool to control whether
the clone bitmap should be updated (if it exists) but otherwise it
is a more or less direct substitution.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Change the arguments to gfs2_testbit() so that it now just takes an
rbm specifying the position of the two bit entry to return.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Function gfs2_bitfit was checking for state > 3, but that's
impossible since it is only called from rgblk_search, which receives
only GFS2_BLKST_ constants.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Function add_to_queue was checking may_grant for the passed-in
holder for every iteration of its gh2 loop. Now it only checks it
once at the beginning to see if a try lock is futile.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Function gfs2_glock_dq_wait called two-line function wait_on_demote,
so they were combined.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Function gfs2_glock_wait only called function wait_on_holder and
returned its return code, so they were combined for readability.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since function gfs2_glock_schedule_for_reclaim is only two
significant lines, we can eliminate it, simplifying the code
and making it more readable.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch changes function gfs2_direct_IO so that it uses a normal
call to gfs2_glock_dq rather than a call to a multiple-dq of one item.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes a few small rbm related things. First, it fixes
a corner case where the rbm needs to switch bitmaps and wasn't
adjusting its buffer pointer. Second, there's a white space issue
fixed. Third, the logic in function gfs2_rbm_from_block was optimized
a bit. Lastly, a check for goal block overflows was added to function
gfs2_alloc_blocks.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
One corner case which the original patch failed to take into
account was when there is a reservation which ended such that
the following block was one beyond the end of the rgrp in
question. This extra test fixes that case.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: Bob Peterson <rpeterso@redhat.com>
Tested-by: Bob Peterson <rpeterso@redhat.com>
gfs2 calls RB_EMPTY_NODE() to check if nodes are not on an rbtree.
The corresponding initialization function is RB_CLEAR_NODE().
rb_init_node() was never clearly defined and is going away.
Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is part of a series of patches which are introducing the
gfs2_rbm structure throughout the block allocation code. The
main aim of this part is to create a search function which can
deal directly with struct gfs2_rbm. In this case it specifies
the initial position at which to start the search and also the
point at which the search terminates.
The net result of this is to clean up the search code and make
it rather more readable, and the various possible exceptions which
may occur during the search are partitioned into their own functions.
There are some bug fixes too. We should not be checking the reservations
while allocating extents - the time for that is when we are searching
for where to put the extent, not when we've already made that decision.
Also, rgblk_search had two uses, and in only one of those cases did
it make sense to check for reservations. This is fixed in the new
gfs2_rbm_find function, which has a cleaner interface.
The reservation checking has been improved by always checking for
contiguous reservations, and returning the first free block after
all contiguous reservations. This is done under the spin lock to
ensure consistancy of the tree.
The allocation of extents is now in all cases done by the existing
allocation code, and if there is an active reservation, that is updated
after the fact. Again this is done under the spin lock, since it entails
changing the lookup key for the reservation in question.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch introduces a new structure, gfs2_rbm, which is a
tuple of a resource group, a bitmap within the resource group
and an offset within that bitmap. This is designed to make
manipulating these sets of variables easier. There is also a
new helper function which converts this representation back
to a disk block address.
In addition, the rbtree nodes which are used for the reservations
were not being correctly initialised, which is now fixed. Also,
the tracing was not passing through the inode where it should
have been. That is mostly fixed aside from one corner case. This
needs to be revisited since there can also be a NULL rgrp in
some cases which results in the device being incorrect in the
trace.
This is intended to be the first step towards cleaning up some
of the allocation code, and some further bug fixes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The rs_requested field is left over from the original allocation
code, however this should have been a parameter passed to the
various functions from gfs2_inplace_reserve() and not a member of the
reservation structure as the value is not required after the
initial allocation.
This also helps simplify the code since we no longer need to set
the rs_requested to zero. Also the gfs2_inplace_release()
function can also be simplified since the reservation structure
will always be defined when it is called, and the only remaining
task is to unlock the rgrp if required. It can also now be
called unconditionally too, resulting in a further simplification.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There were two functions in the xattr code which were nearly
identical, the only difference being that one was copy data into
the unstuffed xattrs and the other was copying data out from it.
This patch merges the two functions such that the code which deal
with iteration over the unstuffed xattrs is no longer duplicated.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Recently, I ecountered some corrupted filesystems in which some
groups' free inode counts were 65535, it seemed that free inode
count was overflow. This patch teaches ext4 to check free inode
count before allocaing an inode.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Free block counters should be checked before doing allocation.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The crash was caused by a variable being erronously declared static in
token2str().
In addition to /proc/mounts, the problem can also be easily replicated
by accessing /proc/fs/ext4/<partition>/options in parallel:
$ cat /proc/fs/ext4/<partition>/options > options.txt
... and then running the following command in two different terminals:
$ while diff /proc/fs/ext4/<partition>/options options.txt; do true; done
This is also the cause of the following a crash while running xfstests
#234, as reported in the following bug reports:
https://bugs.launchpad.net/bugs/1053019https://bugzilla.kernel.org/show_bug.cgi?id=47731
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Brad Figg <brad.figg@canonical.com>
Cc: stable@vger.kernel.org
normally we deal with lock_mount()/umount races by checking that
mountpoint to be is still in our namespace after lock_mount() has
been done. However, do_add_mount() skips that check when called
with MNT_SHRINKABLE in flags (i.e. from finish_automount()). The
reason is that ->mnt_ns may be a temporary namespace created exactly
to contain automounts a-la NFS4 referral handling. It's not the
namespace of the caller, though, so check_mnt() would fail here.
We still need to check that ->mnt_ns is non-NULL in that case,
though.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- fix a regression related to xfs_sync_worker racing with unmount.
- fix a race while discarding xfs buffers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=ZcGP
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v3.6-rc7' of git://oss.sgi.com/xfs/xfs
Pull xfs bugfixes from Ben Myers:
- fix a regression related to xfs_sync_worker racing with unmount.
- fix a race while discarding xfs buffers.
* tag 'for-linus-v3.6-rc7' of git://oss.sgi.com/xfs/xfs:
xfs: stop the sync worker before xfs_unmountfs
xfs: fix race while discarding buffers [V4]
The format_array_alloc() function is fundamentally racy, in that it
prints the array twice: once to figure out how much space to allocate
for the buffer, and the second time to actually print out the data.
If any of the array contents changes in between, the allocation size may
be wrong, and the end result may be truncated in odd ways.
Just don't do it. Allocate a maximum-sized array up-front, and just
format the array contents once. The only user of the u32_array
interfaces is the Xen spinlock statistics code, and it has 31 entries in
the arrays, so the maximum size really isn't that big, and the end
result is much simpler code without the bug.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
u32_array_open() is racy when multiple threads read from a file with a
seek position of zero, i.e. when two or more simultaneous reads are
occurring after the non-seekable files are created. It is possible that
file->private_data is double-freed because the threads races between
kfree(file->private-data);
and
file->private_data = NULL;
The fix is to only do format_array_alloc() when the file is opened and
free it when it is closed.
Note that because the file has always been non-seekable, you can't open
it and read it multiple times anyway, so the data has always been
generated just once. The difference is that now it is generated at open
time rather than at the time of the first read, and that avoids the
race.
Reported-by: Dave Jones <davej@redhat.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Raghavendra <raghavendra.kt@linux.vnet.ibm.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The RS-485 TIOCSRS485 and TIOCGRS485 ioctls are 32-bit compatible, so
in order to call them on 64-bit systems from 32-bit user mode, we add
them to the ioctl pointer list as compatible ioctls.
Signed-off-by: Jaeden Amero <jaeden.amero@ni.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- General routine uid/gid conversion work
- When storing posix acls treat ACL_USER and ACL_GROUP separately
so I can call from_kuid or from_kgid as appropriate.
- When reading posix acls treat ACL_USER and ACL_GROUP separately
so I can call make_kuid or make_kgid as appropriate.
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: "Tigran A. Aivazian" <tigran@aivazian.fsnet.co.uk>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Don't make the security modules deal with raw user space uid and
gids instead pass in a kuid_t and a kgid_t so that security modules
only have to deal with internal kernel uids and gids.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: James Morris <james.l.morris@oracle.com>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Note sysctl_hugetlb_shm_group can only be written in the root user
in the initial user namespace, so we can assume sysctl_hugetlb_shm_group
is in the initial user namespace.
Cc: William Irwin <wli@holomorphy.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The action field has been merged into struct btrfs_delayed_ref_node,
and no struct btrfs_delayed_ref is available now.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Like 8250 driver, when pstore is registered as a console,
to avoid recursive spinlocks when panic happening, change the
spin_lock_irqsave to spin_trylock_irqsave when oops_in_progress
is true.
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
The update_backups() function is used to backup all the metadata
blocks, so we should not take it for granted that 'data' is pointed to
a super block and use ext4_superblock_csum_set to calculate the
checksum there. In case where the data is a group descriptor block,
it will corrupt the last group descriptor, and then e2fsck will
complain about it it.
As all the metadata checksums should already be OK when we do the
backup, remove the wrong ext4_superblock_csum_set and it should be
just fine.
Reported-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
The WRITE SAME command supported on some SCSI devices allows the same
block to be efficiently replicated throughout a block range. Only a
single logical block is transferred from the host and the storage device
writes the same data to all blocks described by the I/O.
This patch implements support for WRITE SAME in the block layer. The
blkdev_issue_write_same() function can be used by filesystems and block
drivers to replicate a buffer across a block range. This can be used to
efficiently initialize software RAID devices, etc.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In ext4_nonda_switch(), if the file system is getting full we used to
call writeback_inodes_sb_if_idle(). The problem is that we can be
holding i_mutex already, and this causes a potential deadlock when
writeback_inodes_sb_if_idle() when it tries to take s_umount. (See
lockdep output below).
As it turns out we don't need need to hold s_umount; the fact that we
are in the middle of the write(2) system call will keep the superblock
pinned. Unfortunately writeback_inodes_sb() checks to make sure
s_umount is taken, and the VFS uses a different mechanism for making
sure the file system doesn't get unmounted out from under us. The
simplest way of dealing with this is to just simply grab s_umount
using a trylock, and skip kicking the writeback flusher thread in the
very unlikely case that we can't take a read lock on s_umount without
blocking.
Also, we now check the cirteria for kicking the writeback thread
before we decide to whether to fall back to non-delayed writeback, so
if there are any outstanding delayed allocation writes, we try to get
them resolved as soon as possible.
[ INFO: possible circular locking dependency detected ]
3.6.0-rc1-00042-gce894ca #367 Not tainted
-------------------------------------------------------
dd/8298 is trying to acquire lock:
(&type->s_umount_key#18){++++..}, at: [<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46
but task is already holding lock:
(&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3
which lock already depends on the new lock.
2 locks held by dd/8298:
#0: (sb_writers#2){.+.+.+}, at: [<c01ddcc5>] generic_file_aio_write+0x56/0xd3
#1: (&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3
stack backtrace:
Pid: 8298, comm: dd Not tainted 3.6.0-rc1-00042-gce894ca #367
Call Trace:
[<c015b79c>] ? console_unlock+0x345/0x372
[<c06d62a1>] print_circular_bug+0x190/0x19d
[<c019906c>] __lock_acquire+0x86d/0xb6c
[<c01999db>] ? mark_held_locks+0x5c/0x7b
[<c0199724>] lock_acquire+0x66/0xb9
[<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46
[<c06db935>] down_read+0x28/0x58
[<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46
[<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46
[<c026f3b2>] ext4_nonda_switch+0xe1/0xf4
[<c0271ece>] ext4_da_write_begin+0x27/0x193
[<c01dcdb0>] generic_file_buffered_write+0xc8/0x1bb
[<c01ddc47>] __generic_file_aio_write+0x1dd/0x205
[<c01ddce7>] generic_file_aio_write+0x78/0xd3
[<c026d336>] ext4_file_write+0x480/0x4a6
[<c0198c1d>] ? __lock_acquire+0x41e/0xb6c
[<c0180944>] ? sched_clock_cpu+0x11a/0x13e
[<c01967e9>] ? trace_hardirqs_off+0xb/0xd
[<c018099f>] ? local_clock+0x37/0x4e
[<c0209f2c>] do_sync_write+0x67/0x9d
[<c0209ec5>] ? wait_on_retry_sync_kiocb+0x44/0x44
[<c020a7b9>] vfs_write+0x7b/0xe6
[<c020a9a6>] sys_write+0x3b/0x64
[<c06dd4bd>] syscall_call+0x7/0xb
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Do not iterate over data blocks scanning for bh's to forget as they're
never exist. This improves time taken by unlink / truncate syscall.
Tested by continuously truncating file that is being written by dd.
Another test is rm -rf of linux tree while tar unpacks it. With
ordered data mode condition unlikely(!tbh) was always met in
ext4_free_blocks. With journal data mode tbh was found only few times,
so optimisation is also possible.
Unlinking fallocated 60G file after doing sync && echo 3 >
/proc/sys/vm/drop_caches && time rm --help
X86 before (linux 3.6-rc4):
# time rm -f test1
real 0m2.710s
user 0m0.000s
sys 0m1.530s
X86 after:
# time rm -f test1
real 0m0.644s
user 0m0.003s
sys 0m0.060s
MIPS before (linux 2.6.37):
# time rm -f test1
real 0m 4.93s
user 0m 0.00s
sys 0m 4.61s
MIPS after:
# time rm -f test1
real 0m 0.16s
user 0m 0.00s
sys 0m 0.06s
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrey Sidorov <qrxd43@motorola.com>
Commit 1c6bd7173d introduced a regression where an online resize
operation which did not change the number of block groups would fail,
i.e:
mke2fs -t /dev/vdc 60000
mount /dev/vdc
resize2fs /dev/vdc 60001
This was due to a bug in the logic regarding when to try converting
the filesystem to use meta_bg.
Also fix up a number of other minor issues with the online resizing
code: (a) Fix a sparse warning; (b) only check to make sure the device
is large enough once, instead of multiple times through the resize
loop.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cancel work of the xfs_sync_worker before teardown of the log in
xfs_unmountfs. This prevents occasional crashes on unmount like so:
PID: 21602 TASK: ee9df060 CPU: 0 COMMAND: "kworker/0:3"
#0 [c5377d28] crash_kexec at c0292c94
#1 [c5377d80] oops_end at c07090c2
#2 [c5377d98] no_context at c06f614e
#3 [c5377dbc] __bad_area_nosemaphore at c06f6281
#4 [c5377df4] bad_area_nosemaphore at c06f629b
#5 [c5377e00] do_page_fault at c070b0cb
#6 [c5377e7c] error_code (via page_fault) at c070892c
EAX: f300c6a8 EBX: f300c6a8 ECX: 000000c0 EDX: 000000c0 EBP: c5377ed0
DS: 007b ESI: 00000000 ES: 007b EDI: 00000001 GS: ffffad20
CS: 0060 EIP: c0481ad0 ERR: ffffffff EFLAGS: 00010246
#7 [c5377eb0] atomic64_read_cx8 at c0481ad0
#8 [c5377ebc] xlog_assign_tail_lsn_locked at f7cc7c6e [xfs]
#9 [c5377ed4] xfs_trans_ail_delete_bulk at f7ccd520 [xfs]
#10 [c5377f0c] xfs_buf_iodone at f7ccb602 [xfs]
#11 [c5377f24] xfs_buf_do_callbacks at f7cca524 [xfs]
#12 [c5377f30] xfs_buf_iodone_callbacks at f7cca5da [xfs]
#13 [c5377f4c] xfs_buf_iodone_work at f7c718d0 [xfs]
#14 [c5377f58] process_one_work at c024ee4c
#15 [c5377f98] worker_thread at c024f43d
#16 [c5377fbc] kthread at c025326b
#17 [c5377fe8] kernel_thread_helper at c070e834
PID: 26653 TASK: e79143b0 CPU: 3 COMMAND: "umount"
#0 [cde0fda0] __schedule at c0706595
#1 [cde0fe28] schedule at c0706b89
#2 [cde0fe30] schedule_timeout at c0705600
#3 [cde0fe94] __down_common at c0706098
#4 [cde0fec8] __down at c0706122
#5 [cde0fed0] down at c025936f
#6 [cde0fee0] xfs_buf_lock at f7c7131d [xfs]
#7 [cde0ff00] xfs_freesb at f7cc2236 [xfs]
#8 [cde0ff10] xfs_fs_put_super at f7c80f21 [xfs]
#9 [cde0ff1c] generic_shutdown_super at c0333d7a
#10 [cde0ff38] kill_block_super at c0333e0f
#11 [cde0ff48] deactivate_locked_super at c0334218
#12 [cde0ff58] deactivate_super at c033495d
#13 [cde0ff68] mntput_no_expire at c034bc13
#14 [cde0ff7c] sys_umount at c034cc69
#15 [cde0ffa0] sys_oldumount at c034ccd4
#16 [cde0ffb0] system_call at c0707e66
commit 11159a05 added this to xfs_log_unmount and needs to be cleaned up
at a later date.
Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
This function returns the wrong value, which causes the callers to get
the length of the resulting pathname wrong when it contains non-ASCII
characters.
This seems to fix https://bugzilla.samba.org/show_bug.cgi?id=6767
Cc: <stable@vger.kernel.org>
Reported-by: Baldvin Kovacs <baldvin.kovacs@gmail.com>
Reported-and-Tested-by: Nicolas Lefebvre <nico.lefebvre@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
IBM reported a soft lockup after applying the fix for the rename_lock
deadlock. Commit c83ce989cb ("VFS: Fix the nfs sillyrename regression
in kernel 2.6.38") was found to be the culprit.
The nfs sillyrename fix used DCACHE_DISCONNECTED to indicate that the
dentry was killed. This flag can be set on non-killed dentries too,
which results in infinite retries when trying to traverse the dentry
tree.
This patch introduces a separate flag: DCACHE_DENTRY_KILLED, which is
only set in d_kill() and makes try_to_ascend() test only this flag.
IBM reported successful test results with this patch.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of checking whether the handle is valid, we check if journal
is enabled. This avoids taking the s_orphan_lock mutex in all cases
when there is no journal in use, including the error paths where
ext4_orphan_del() is called with a handle set to NULL.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is a revert of commit b56ff9d397, which removed the call to
ext4_issue_discard() to fix a BUG reported because
ext4_issue_discard() was being called from inside a block group
spinlock. As it turns out this bug had already been fixed by Lukas
Czerner in commit 53fdcf992d by the simple expedient of moving when
we call ext4_issue_discard() outside the spinlock.
So it should be safe to re-enable this functionality, which I tested
by putting an BUG_ON(in_atomic) just after the restored callsite to
ext4_issue_discard().
Addresses-Google-Bug: #6750518
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Anatol Pomozov <anatol.pomozov@gmail.com>
In a hasty fix to replace a 64-bit division with do_div, I
unintentionally assigned the divisor to a 32-bit variable.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Tino Reichardt <milky-kernel@mcmilk.de>
Now that the type changes are done, here is the final set of
changes to make the quota code work when user namespaces are enabled.
Small cleanups and fixes to make the code build when user namespaces
are enabled.
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Convert w_dq_id to be a struct kquid and remove the now unncessary
w_dq_type.
This is a simple conversion and enough other places have already
been converted that this actually reduces the code complexity
by a little bit, when removing now unnecessary type conversions.
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Change struct dquot dq_id to a struct kqid and remove the now
unecessary dq_type.
Make minimal changes to dquot, quota_tree, quota_v1, quota_v2, ext3,
ext4, and ocfs2 to deal with the change in quota structures and
signatures. The ocfs2 changes are larger than most because of the
extensive tracing throughout the ocfs2 quota code that prints out
dq_id.
quota_tree.c:get_index is modified to take a struct kqid instead of a
qid_t because all of it's callers pass in dquot->dq_id and it allows
me to introduce only a single conversion.
The rest of the changes are either just replacing dq_type with dq_id.type,
adding conversions to deal with the change in type and occassionally
adding qid_eq to allow quota id comparisons in a user namespace safe way.
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Theodore Tso <tytso@mit.edu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Modify dqget to take struct kqid instead of a type and an identifier
pair.
Modify the callers of dqget in ocfs2 and dquot to take generate
a struct kqid so they can continue to call dqget. The conversion
to create struct kqid should all be the final conversions that
are needed in those code paths.
Cc: Jan Kara <jack@suse.cz>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Modify quota_send_warning to take struct kqid instead a type and
identifier pair.
When sending netlink broadcasts always convert uids and quota
identifiers into the intial user namespace. There is as yet no way to
send a netlink broadcast message with different contents to receivers
in different namespaces, so for the time being just map all of the
identifiers into the initial user namespace which preserves the
current behavior.
Change the callers of quota_send_warning in gfs2, xfs and dquot
to generate a struct kqid to pass to quota send warning. When
all of the user namespaces convesions are complete a struct kqid
values will be availbe without need for conversion, but a conversion
is needed now to avoid needing to convert everything at once.
Cc: Ben Myers <bpm@sgi.com>
Cc: Alex Elder <elder@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Update the quotactl user space interface to successfull compile with
user namespaces support enabled and to hand off quota identifiers to
lower layers of the kernel in struct kqid instead of type and qid
pairs.
The quota on function is not converted because while it takes a quota
type and an id. The id is the on disk quota format to use, which
is something completely different.
The signature of two struct quotactl_ops methods were changed to take
struct kqid argumetns get_dqblk and set_dqblk.
The dquot, xfs, and ocfs2 implementations of get_dqblk and set_dqblk
are minimally changed so that the code continues to work with
the change in parameter type.
This is the first in a series of changes to always store quota
identifiers in the kernel in struct kqid and only use raw type and qid
values when interacting with on disk structures or userspace. Always
using struct kqid internally makes it hard to miss places that need
conversion to or from the kernel internal values.
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Ben Myers <bpm@sgi.com>
Cc: Alex Elder <elder@kernel.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add the data type struct kqid which holds the kernel internal form of
the owning identifier of a quota. struct kqid is a replacement for
the implicit union of uid, gid and project id stored in an unsigned
int and the quota type field that is was used in the quota data
structures. Making the data type explicit allows the kuid_t and
kgid_t type safety to propogate more thoroughly through the code,
revealing more places where uid/gid conversions need be made.
Along with the data type struct kqid comes the helper functions
qid_eq, qid_lt, from_kqid, from_kqid_munged, qid_valid, make_kqid,
make_kqid_invalid, make_kqid_uid, make_kqid_gid.
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
