Daniel Borkmann says:
====================
pull-request: bpf 2018-07-01
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) A bpf_fib_lookup() helper fix to change the API before freeze to
return an encoding of the FIB lookup result and return the nexthop
device index in the params struct (instead of device index as return
code that we had before), from David.
2) Various BPF JIT fixes to address syzkaller fallout, that is, do not
reject progs when set_memory_*() fails since it could still be RO.
Also arm32 JIT was not using bpf_jit_binary_lock_ro() API which was
an issue, and a memory leak in s390 JIT found during review, from
Daniel.
3) Multiple fixes for sockmap/hash to address most of the syzkaller
triggered bugs. Usage with IPv6 was crashing, a GPF in bpf_tcp_close(),
a missing sock_map_release() routine to hook up to callbacks, and a
fix for an omitted bucket lock in sock_close(), from John.
4) Two bpftool fixes to remove duplicated error message on program load,
and another one to close the libbpf object after program load. One
additional fix for nfp driver's BPF offload to avoid stopping offload
completely if replace of program failed, from Jakub.
5) Couple of BPF selftest fixes that bail out in some of the test
scripts if the user does not have the right privileges, from Jeffrin.
6) Fixes in test_bpf for s390 when CONFIG_BPF_JIT_ALWAYS_ON is set
where we need to set the flag that some of the test cases are expected
to fail, from Kleber.
7) Fix to detangle BPF_LIRC_MODE2 dependency from CONFIG_CGROUP_BPF
since it has no relation to it and lirc2 users often have configs
without cgroups enabled and thus would not be able to use it, from Sean.
8) Fix a selftest failure in sockmap by removing a useless setrlimit()
call that would set a too low limit where at the same time we are
already including bpf_rlimit.h that does the job, from Yonghong.
9) Fix BPF selftest config with missing missing NET_SCHED, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend says:
====================
This addresses two syzbot issues that lead to identifying (by Eric and
Wei) a class of bugs where we don't correctly check for IPv4/v6
sockets and their associated state. The second issue was a locking
omission in sockhash.
The first patch addresses IPv6 socks and fixing an error where
sockhash would overwrite the prot pointer with IPv4 prot. To fix
this build similar solution to TLS ULP. Although we continue to
allow socks in all states not just ESTABLISH in this patch set
because as Martin points out there should be no issue with this
on the sockmap ULP because we don't use the ctx in this code. Once
multiple ULPs coexist we may need to revisit this. However we
can do this in *next trees.
The other issue syzbot found that the tcp_close() handler missed
locking the hash bucket lock which could result in corrupting the
sockhash bucket list if delete and close ran at the same time.
And also the smap_list_remove() routine was not working correctly
at all. This was not caught in my testing because in general my
tests (to date at least lets add some more robust selftest in
bpf-next) do things in the "expected" order, create map, add socks,
delete socks, then tear down maps. The tests we have that do the
ops out of this order where only working on single maps not multi-
maps so we never saw the issue. Thanks syzbot. The fix is to
restructure the tcp_close() lock handling. And fix the obvious
bug in smap_list_remove().
Finally, during review I noticed the release handler was omitted
from the upstream code (patch 4) due to an incorrect merge conflict
fix when I ported the code to latest bpf-next before submitting.
This would leave references to the map around if the user never
closes the map.
v3: rework patches, dropping ESTABLISH check and adding rcu
annotation along with the smap_list_remove fix
v4: missed one more case where maps was being accessed without
the sk_callback_lock, spoted by Martin as well.
v5: changed to use a specific lock for maps and reduced callback
lock so that it is only used to gaurd sk callbacks. I think
this makes the logic a bit cleaner and avoids confusion
ovoer what each lock is doing.
Also big thanks to Martin for thorough review he caught at least
one case where I missed a rcu_call().
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add map_release_uref pointer to hashmap ops. This was dropped when
original sockhash code was ported into bpf-next before initial
commit.
Fixes: 8111038444 ("bpf: sockmap, add hash map support")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
First the sk_callback_lock() was being used to protect both the
sock callback hooks and the psock->maps list. This got overly
convoluted after the addition of sockhash (in sockmap it made
some sense because masp and callbacks were tightly coupled) so
lets split out a specific lock for maps and only use the callback
lock for its intended purpose. This fixes a couple cases where
we missed using maps lock when it was in fact needed. Also this
makes it easier to follow the code because now we can put the
locking closer to the actual code its serializing.
Next, in sock_hash_delete_elem() the pattern was as follows,
sock_hash_delete_elem()
[...]
spin_lock(bucket_lock)
l = lookup_elem_raw()
if (l)
hlist_del_rcu()
write_lock(sk_callback_lock)
.... destroy psock ...
write_unlock(sk_callback_lock)
spin_unlock(bucket_lock)
The ordering is necessary because we only know the {p}sock after
dereferencing the hash table which we can't do unless we have the
bucket lock held. Once we have the bucket lock and the psock element
it is deleted from the hashmap to ensure any other path doing a lookup
will fail. Finally, the refcnt is decremented and if zero the psock
is destroyed.
In parallel with the above (or free'ing the map) a tcp close event
may trigger tcp_close(). Which at the moment omits the bucket lock
altogether (oops!) where the flow looks like this,
bpf_tcp_close()
[...]
write_lock(sk_callback_lock)
for each psock->maps // list of maps this sock is part of
hlist_del_rcu(ref_hash_node);
.... destroy psock ...
write_unlock(sk_callback_lock)
Obviously, and demonstrated by syzbot, this is broken because
we can have multiple threads deleting entries via hlist_del_rcu().
To fix this we might be tempted to wrap the hlist operation in a
bucket lock but that would create a lock inversion problem. In
summary to follow locking rules the psocks maps list needs the
sk_callback_lock (after this patch maps_lock) but we need the bucket
lock to do the hlist_del_rcu.
To resolve the lock inversion problem pop the head of the maps list
repeatedly and remove the reference until no more are left. If a
delete happens in parallel from the BPF API that is OK as well because
it will do a similar action, lookup the lock in the map/hash, delete
it from the map/hash, and dec the refcnt. We check for this case
before doing a destroy on the psock to ensure we don't have two
threads tearing down a psock. The new logic is as follows,
bpf_tcp_close()
e = psock_map_pop(psock->maps) // done with map lock
bucket_lock() // lock hash list bucket
l = lookup_elem_raw(head, hash, key, key_size);
if (l) {
//only get here if elmnt was not already removed
hlist_del_rcu()
... destroy psock...
}
bucket_unlock()
And finally for all the above to work add missing locking around map
operations per above. Then add RCU annotations and use
rcu_dereference/rcu_assign_pointer to manage values relying on RCU so
that the object is not free'd from sock_hash_free() while it is being
referenced in bpf_tcp_close().
Reported-by: syzbot+0ce137753c78f7b6acc1@syzkaller.appspotmail.com
Fixes: 8111038444 ("bpf: sockmap, add hash map support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If a hashmap is free'd with open socks it removes the reference to
the hash entry from the psock. If that is the last reference to the
psock then it will also be free'd by the reference counting logic.
However the current logic that removes the hash reference from the
list of references is broken. In smap_list_remove() we first check
if the sockmap entry matches and then check if the hashmap entry
matches. But, the sockmap entry sill always match because its NULL in
this case which causes the first entry to be removed from the list.
If this is always the "right" entry (because the user adds/removes
entries in order) then everything is OK but otherwise a subsequent
bpf_tcp_close() may reference a free'd object.
To fix this create two list handlers one for sockmap and one for
sockhash.
Reported-by: syzbot+0ce137753c78f7b6acc1@syzkaller.appspotmail.com
Fixes: 8111038444 ("bpf: sockmap, add hash map support")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This fixes a crash where we assign tcp_prot to IPv6 sockets instead
of tcpv6_prot.
Previously we overwrote the sk->prot field with tcp_prot even in the
AF_INET6 case. This patch ensures the correct tcp_prot and tcpv6_prot
are used.
Tested with 'netserver -6' and 'netperf -H [IPv6]' as well as
'netperf -H [IPv4]'. The ESTABLISHED check resolves the previously
crashing case here.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Reported-by: syzbot+5c063698bdbfac19f363@syzkaller.appspotmail.com
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 5088814a6e (ACPICA: AML parser: attempt to continue loading
table after error) unintentionally added leading newlines to error
messages emitted by ACPICA which caused unexpected things to be
printed to the kernel log. Drop these newlines (which effectively
reverts the part of commit 5088814a6e adding them).
Fixes: 5088814a6e (ACPICA: AML parser: attempt to continue loading table after error)
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is reported that commit c62ec4610c (PM / core: Fix direct_complete
handling for devices with no callbacks) introduced a system suspend
regression on Samsung 305V4A by allowing a PCI bridge (not a PCIe
port) to stay in D3 over suspend-to-RAM, which is a side effect of
setting power.direct_complete for the children of that bridge that
have no PM callbacks.
On the majority of systems PCI bridges are not allowed to be
runtime-suspended (the power/control sysfs attribute is set to "on"
for them by default), but user space can change that setting and if
it does so and a given bridge has no children with PM callbacks, the
direct_complete optimization will be applied to it and it will stay
in suspend over system suspend. Apparently, that confuses the
platform firmware on the affected machine and that may very well
happen elsewhere, so avoid the direct_complete optimization for
PCI bridges with no drivers (if there is a driver, it should take
care of the PM handling) on suspend-to-RAM altogether (that should
not matter for suspend-to-idle as platform firmware is not involved
in it).
Fixes: c62ec4610c (PM / core: Fix direct_complete handling for devices with no callbacks)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199941
Reported-by: n0000b.n000b@gmail.com
Tested-by: n0000b.n000b@gmail.com
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 4.15+ <stable@vger.kernel.org> # 4.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull parisc fixes and cleanups from Helge Deller:
"Nothing exiting in this patchset, just
- small cleanups of header files
- default to 4 CPUs when building a SMP kernel
- mark 16kB and 64kB page sizes broken
- addition of the new io_pgetevents syscall"
* 'parisc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Build kernel without -ffunction-sections
parisc: Reduce debug output in unwind code
parisc: Wire up io_pgetevents syscall
parisc: Default to 4 SMP CPUs
parisc: Convert printk(KERN_LEVEL) to pr_lvl()
parisc: Mark 16kB and 64kB page sizes BROKEN
parisc: Drop struct sigaction from not exported header file
A smaller batch for the end of the week (let's see if I can keep the
weekly cadence going for once).
All medium-grade fixes here, nothing worrisome:
- Fixes for some fairly old bugs around SD card write-protect detection
and GPIO interrupt assignments on Davinci.
- Wifi module suspend fix for Hikey.
- Minor DT tweaks to fix inaccuracies for Amlogic platforms, on of
which solves booting with third-party u-boot.
-----BEGIN PGP SIGNATURE-----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=55JJ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A smaller batch for the end of the week (let's see if I can keep the
weekly cadence going for once).
All medium-grade fixes here, nothing worrisome:
- Fixes for some fairly old bugs around SD card write-protect
detection and GPIO interrupt assignments on Davinci.
- Wifi module suspend fix for Hikey.
- Minor DT tweaks to fix inaccuracies for Amlogic platforms, one
of which solves booting with third-party u-boot"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: hikey960: Define wl1837 power capabilities
arm64: dts: hikey: Define wl1835 power capabilities
ARM64: dts: meson-gxl: fix Mali GPU compatible string
ARM64: dts: meson-axg: fix ethernet stability issue
ARM64: dts: meson-gx: fix ATF reserved memory region
ARM64: dts: meson-gxl-s905x-p212: Add phy-supply for usb0
ARM64: dts: meson: fix register ranges for SD/eMMC
ARM64: dts: meson: disable sd-uhs modes on the libretech-cc
ARM: dts: da850: Fix interrups property for gpio
ARM: davinci: board-da850-evm: fix WP pin polarity for MMC/SD
- introduce __diag_* macros and suppress -Wattribute-alias warnings from GCC 8
- fix stack protector test script for x86_64
- fix line number handling in Kconfig
- document that '#' starts a comment in Kconfig
- handle P_SYMBOL property in dump debugging of Kconfig
- correct help message of LD_DEAD_CODE_DATA_ELIMINATION
- fix occasional segmentation faults in Kconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oABr
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- introduce __diag_* macros and suppress -Wattribute-alias warnings
from GCC 8
- fix stack protector test script for x86_64
- fix line number handling in Kconfig
- document that '#' starts a comment in Kconfig
- handle P_SYMBOL property in dump debugging of Kconfig
- correct help message of LD_DEAD_CODE_DATA_ELIMINATION
- fix occasional segmentation faults in Kconfig
* tag 'kbuild-fixes-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: loop boundary condition fix
kbuild: reword help of LD_DEAD_CODE_DATA_ELIMINATION
kconfig: handle P_SYMBOL in print_symbol()
kconfig: document Kconfig source file comments
kconfig: fix line numbers for if-entries in menu tree
stack-protector: Fix test with 32-bit userland and CONFIG_64BIT=y
powerpc: Remove -Wattribute-alias pragmas
disable -Wattribute-alias warning for SYSCALL_DEFINEx()
kbuild: add macro for controlling warnings to linux/compiler.h
The patch noted in the fixes below converted get_user_pages_fast() to
get_user_pages_longterm(), however the two calls differ in a few ways.
First _fast() is documented to not require the mmap_sem, while _longterm()
is documented to need it. Hold the mmap sem as required.
Second, _fast accepts an 'int write' while _longterm uses 'unsigned int
gup_flags', so the expression '!!(prot & IOMMU_WRITE)' is only working by
luck as FOLL_WRITE is currently == 0x1. Use the expected FOLL_WRITE
constant instead.
Fixes: 94db151dc8 ("vfio: disable filesystem-dax page pinning")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pull x86 fixes from Ingo Molnar:
"The biggest diffstat comes from self-test updates, plus there's entry
code fixes, 5-level paging related fixes, console debug output fixes,
and misc fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Clean up the printk()s in show_fault_oops()
x86/mm: Drop unneeded __always_inline for p4d page table helpers
x86/efi: Fix efi_call_phys_epilog() with CONFIG_X86_5LEVEL=y
selftests/x86/sigreturn: Do minor cleanups
selftests/x86/sigreturn/64: Fix spurious failures on AMD CPUs
x86/entry/64/compat: Fix "x86/entry/64/compat: Preserve r8-r11 in int $0x80"
x86/mm: Don't free P4D table when it is folded at runtime
x86/entry/32: Add explicit 'l' instruction suffix
x86/mm: Get rid of KERN_CONT in show_fault_oops()
Pull perf fixes from Ingo Molnar:
"Tooling fixes mostly, plus a build warning fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf/core: Move inline keyword at the beginning of declaration
tools/headers: Pick up latest kernel ABIs
perf tools: Fix crash caused by accessing feat_ops[HEADER_LAST_FEATURE]
perf script: Fix crash because of missing evsel->priv
perf script: Add missing output fields in a hint
perf bench: Fix numa report output code
perf stat: Remove duplicate event counting
perf alias: Rebuild alias expression string to make it comparable
perf alias: Remove trailing newline when reading sysfs files
perf tools: Fix a clang 7.0 compilation error
tools include uapi: Synchronize bpf.h with the kernel
tools include uapi: Update if_link.h to pick IFLA_{BRPORT_ISOLATED,VXLAN_TTL_INHERIT}
tools include powerpc: Update arch/powerpc/include/uapi/asm/unistd.h copy to get 'rseq' syscall
perf tools: Update x86's syscall_64.tbl, adding 'io_pgetevents' and 'rseq'
tools headers uapi: Synchronize drm/drm.h
perf intel-pt: Fix packet decoding of CYC packets
perf tests: Add valid callback for parse-events test
perf tests: Add event parsing error handling to parse events test
perf report powerpc: Fix crash if callchain is empty
perf test session topology: Fix test on s390
...
-----BEGIN PGP SIGNATURE-----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=fzCd
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20180629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"One fairly straightforward patch to fix a longstanding issue where a
process could stall while accessing files in selinuxfs and block
everyone else due to a held mutex.
The patch passes all our tests and looks to apply cleanly to your
current tree"
* tag 'selinux-pr-20180629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: move user accesses in selinuxfs out of locked regions
-----BEGIN PGP SIGNATURE-----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=0uqV
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180629' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Small set of fixes for this series. Mostly just minor fixes, the only
oddball in here is the sg change.
The sg change came out of the stall fix for NVMe, where we added a
mempool and limited us to a single page allocation. CONFIG_SG_DEBUG
sort-of ruins that, since we'd need to account for that. That's
actually a generic problem, since lots of drivers need to allocate SG
lists. So this just removes support for CONFIG_SG_DEBUG, which I added
back in 2007 and to my knowledge it was never useful.
Anyway, outside of that, this pull contains:
- clone of request with special payload fix (Bart)
- drbd discard handling fix (Bart)
- SATA blk-mq stall fix (me)
- chunk size fix (Keith)
- double free nvme rdma fix (Sagi)"
* tag 'for-linus-20180629' of git://git.kernel.dk/linux-block:
sg: remove ->sg_magic member
drbd: Fix drbd_request_prepare() discard handling
blk-mq: don't queue more if we get a busy return
block: Fix cloning of requests with a special payload
nvme-rdma: fix possible double free of controller async event buffer
block: Fix transfer when chunk sectors exceeds max
After commit f9d4b0c1e9 ("fib_rules: move common handling of newrule
delrule msgs into fib_nl2rule"), rule_exists got replaced by rule_find
for existing rule lookup in both the add and del paths. While this
is good for the delete path, it solves a few problems but opens up
a few invalid key matches in the add path.
$ip -4 rule add table main tos 10 fwmark 1
$ip -4 rule add table main tos 10
RTNETLINK answers: File exists
The problem here is rule_find does not check if the key masks in
the new and old rule are the same and hence ends up matching a more
secific rule. Rule key masks cannot be easily compared today without
an elaborate if-else block. Its best to introduce key masks for easier
and accurate rule comparison in the future. Until then, due to fear of
regressions this patch re-introduces older loose rule_exists during add.
Also fixes both rule_exists and rule_find to cover missing attributes.
Fixes: f9d4b0c1e9 ("fib_rules: move common handling of newrule delrule msgs into fib_nl2rule")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When doing device hotplug the sub channel must be async to avoid
deadlock issues because device is discovered in softirq context.
When doing changes to MTU and number of channels, the setup
must be synchronous to avoid races such as when MTU and device
settings are done in a single ip command.
Reported-by: Thomas Walker <Thomas.Walker@twosigma.com>
Fixes: 8195b1396e ("hv_netvsc: fix deadlock on hotplug")
Fixes: 732e49850c ("netvsc: fix race on sub channel creation")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As noticed by Eric, we need to switch to the helper
dev_change_tx_queue_len() for SIOCSIFTXQLEN call path too,
otheriwse still miss dev_qdisc_change_tx_queue_len().
Fixes: 6a643ddb56 ("net: introduce helper dev_change_tx_queue_len()")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pool can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/atm/zatm.c:1491 zatm_ioctl() warn: potential spectre issue
'zatm_dev->pool_info' (local cap)
Fix this by sanitizing pool before using it to index
zatm_dev->pool_info
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann says:
====================
s390/qeth: fixes 2018-06-29
please apply a few qeth fixes for -net and your 4.17 stable queue.
Patches 1-3 fix several issues wrt to MAC address management that were
introduced during the 4.17 cycle.
Patch 4 tackles a long-standing issue with busy multi-connection workloads
on devices in af_iucv mode.
Patch 5 makes sure to re-enable all active HW offloads, after a card was
previously set offline and thus lost its HW context.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
commit e830baa9c3 ("qeth: restore device features after recovery") and
commit ce34435641 ("s390/qeth: rely on kernel for feature recovery")
made sure that the HW functions for device features get re-programmed
after recovery.
But we missed that the same handling is also required when a card is
first set offline (destroying all HW context), and then online again.
Fix this by moving the re-enable action out of the recovery-only path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If qeth_qdio_output_handler() detects that a transmit requires async
completion, it replaces the pending buffer's metadata object
(qeth_qdio_out_buffer) so that this queue buffer can be re-used while
the data is pending completion.
Later when the CQ indicates async completion of such a metadata object,
qeth_qdio_cq_handler() tries to free any data associated with this
object (since HW has now completed the transfer). By calling
qeth_clear_output_buffer(), it erronously operates on the queue buffer
that _previously_ belonged to this transfer ... but which has been
potentially re-used several times by now.
This results in double-free's of the buffer's data, and failing
transmits as the buffer descriptor is scrubbed in mid-air.
The correct way of handling this situation is to
1. scrub the queue buffer when it is prepared for re-use, and
2. later obtain the data addresses from the async-completion notifier
(ie. the AOB), instead of the queue buffer.
All this only affects qeth devices used for af_iucv HiperTransport.
Fixes: 0da9581ddb ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
*ether_addr*_64bits functions have been introduced to optimize
performance critical paths, which access 6-byte ethernet address as u64
value to get "nice" assembly. A harmless hack works nicely on ethernet
addresses shoved into a structure or a larger buffer, until busted by
Kasan on smth like plain (u8 *)[6].
qeth_l2_set_mac_address calls qeth_l2_remove_mac passing
u8 old_addr[ETH_ALEN] as an argument.
Adding/removing macs for an ethernet adapter is not that performance
critical. Moreover is_multicast_ether_addr_64bits itself on s390 is not
faster than is_multicast_ether_addr:
is_multicast_ether_addr(%r2) -> %r2
llc %r2,0(%r2)
risbg %r2,%r2,63,191,0
is_multicast_ether_addr_64bits(%r2) -> %r2
llgc %r2,0(%r2)
risbg %r2,%r2,63,191,0
So, let's just use is_multicast_ether_addr instead of
is_multicast_ether_addr_64bits.
Fixes: bcacfcbc82 ("s390/qeth: fix MAC address update sequence")
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When qeth_l2_set_mac_address() finds the card in a non-reachable state,
it merely copies the new MAC address into dev->dev_addr so that
__qeth_l2_set_online() can later register it with the HW.
But __qeth_l2_set_online() may very well be running concurrently, so we
can't trust the card state without appropriate locking:
If the online sequence is past the point where it registers
dev->dev_addr (but not yet in SOFTSETUP state), any address change needs
to be properly programmed into the HW. Otherwise the netdevice ends up
with a different MAC address than what's set in the HW, and inbound
traffic is not forwarded as expected.
This is most likely to occur for OSD in LPAR, where
commit 21b1702af1 ("s390/qeth: improve fallback to random MAC address")
now triggers eg. systemd to immediately change the MAC when the netdevice
is registered with a NET_ADDR_RANDOM address.
Fixes: bcacfcbc82 ("s390/qeth: fix MAC address update sequence")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit b7493e91c1.
On its own, querying RDEV for a MAC address works fine. But when upgrading
from a qeth that previously queried DDEV on a z/VM NIC (ie. any kernel with
commit ec61bd2fd2), the RDEV query now returns a _different_ MAC address
than the DDEV query.
If the NIC is configured with MACPROTECT, z/VM apparently requires us to
use the MAC that was initially returned (on DDEV) and registered. So after
upgrading to a kernel that uses RDEV, the SETVMAC registration cmd for the
new MAC address fails and we end up with a non-operabel interface.
To avoid regressions on upgrade, switch back to using DDEV for the MAC
address query. The downgrade path (first RDEV, later DDEV) is fine, in this
case both queries return the same MAC address.
Fixes: b7493e91c1 ("s390/qeth: use Read device to query hypervisor for MAC")
Reported-by: Michal Kubecek <mkubecek@suse.com>
Tested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The __alx_open function can be called from ndo_open, which is called
under RTNL, or from alx_resume, which isn't. Since commit d768319cd4,
we're calling the netif_set_real_num_{tx,rx}_queues functions, which
need to be called under RTNL.
This is similar to commit 0c2cc02e57 ("igb: Move the calls to set the
Tx and Rx queues into igb_open").
Fixes: d768319cd4 ("alx: enable multiple tx queues")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: fc7a6c287f ("sfc: use a semaphore to lock farch filters too")
Suggested-by: Joseph Korty <joe.korty@concurrent-rt.com>
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a bug where INT_STAT1 was written twice and
INT_STAT2 was ignored when disabling interrupts.
Fixes: b753a9faaf ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sowmini reported that a recent commit broke prefix routes for linklocal
addresses. The newly added modify_prefix_route is attempting to add a
new prefix route when the ifp priority does not match the route metric
however the check needs to account for the default priority. In addition,
the route add fails because the route already exists, and then the delete
removes the one that exists. Flip the order to do the delete first.
Fixes: 8308f3ff17 ("net/ipv6: Add support for specifying metric of connected routes")
Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Tested-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
alloc_skb_with_frags uses __GFP_NORETRY for non-sleeping allocations
which is just a noop and a little bit confusing.
__GFP_NORETRY was added by ed98df3361 ("net: use __GFP_NORETRY for
high order allocations") to prevent from the OOM killer. Yet this was
not enough because fb05e7a89f ("net: don't wait for order-3 page
allocation") didn't want an excessive reclaim for non-costly orders
so it made it completely NOWAIT while it preserved __GFP_NORETRY in
place which is now redundant.
Drop the pointless __GFP_NORETRY because this function is used as
copy&paste source for other places.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur says:
====================
DPAA fixes
A couple of fixes for the DPAA drivers, addressing an issue
with short UDP or TCP frames (with padding) that were marked
as having a wrong checksum and dropped by the FMan hardware
and a problem with the buffer used for the scatter-gather
table being too small as per the hardware requirements.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The DPAA HW requires that at least 256 bytes from the start of the
first scatter-gather table entry are allocated and accessible. The
hardware reads the maximum size the table can have in one access,
thus requiring that the allocation and mapping to be done for the
maximum size of 256B even if there is a smaller number of entries
in the table.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The FMan hardware parser needs to be configured to remove the
short frame padding from the checksum calculation, otherwise
short UDP and TCP frames are likely to be marked as having a
bad checksum.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver performs the internal reload when it receives tx-timeout event from
the OS. Internal reload might fail in some scenarios e.g., fatal HW issues.
In such cases OS still see the link, which would result in undesirable
functionalities such as re-generation of tx-timeouts.
The patch addresses this issue by indicating the link-down to OS when
tx-timeout is detected, and keeping the link in down state till the
internal reload is successful.
Please consider applying it to 'net' branch.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Static checkers complain that id_tbl->table points to longs and 4 bytes
is smaller than sizeof(long). But the since other side is dividing by
32 instead of sizeof(long), that means the current code works fine.
Anyway, it's more conventional to use the BITS_TO_LONGS() macro when
we're allocating a bitmap.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code assumes that there is 4 bytes in a pointer and it doesn't
allocate enough memory.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fast Open key could be stored in different endian based on the CPU.
Previously hosts in different endianness in a server farm using
the same key config (sysctl value) would produce different cookies.
This patch fixes it by always storing it as little endian to keep
same API for LE hosts.
Reported-by: Daniele Iamartino <danielei@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two regression fixes, and a new syscall wire-up.
A fix for the recent conversion to time64_t in the powermac RTC routines, which
caused time to go backward.
Another fix for fallout from the split PMD PTL conversion.
Wire up the new io_pgetevents() syscall.
Thanks to:
Aneesh Kumar K.V, Arnd Bergmann, Breno Leitao, Mathieu Malaterre.
-----BEGIN PGP SIGNATURE-----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=kHJC
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two regression fixes, and a new syscall wire-up:
- A fix for the recent conversion to time64_t in the powermac RTC
routines, which caused time to go backward.
- Another fix for fallout from the split PMD PTL conversion.
- Wire up the new io_pgetevents() syscall.
Thanks to: Aneesh Kumar K.V, Arnd Bergmann, Breno Leitao, Mathieu
Malaterre"
* tag 'powerpc-4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powermac: Fix rtc read/write functions
powerpc/mm/32: Fix pgtable_page_dtor call
powerpc: Wire up io_pgetevents
and fixes interrupt property for DA850 SoC GPIO as defined in
device-tree.
Both of these are not introduced with v4.18 merge but have
existed prior.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJbNjeIAAoJEGFBu2jqvgRN3lgP+wbdjEoDTTss8H5Sdu1VSe8Z
dDn1H4CCOsVqDW23Azu1WsL0WufRZx/fe8DayZ4y1AuLh3I1LvoI1KSEWipMxeub
WmdYJ+jAwhXy45FqXnSvMnGJITzHruwr6qDMCysp0hR3aVXA4DhTKw95Tc2QBbZP
RvhEV/t0tFeuMT138UIPQqecoWCdFaz24MU3ZPh+0NeLtmHLwZnRFWdSmieGMlx1
gQZAiMb6mkOzZ0u3YILNCFA8gMhm3WO2eJU8bVILDbuPpARMTR71VvuOjpHgBJz7
eqamjsHB+5epnxEUXcEuf3gAuED3fTY4+cMImMdSkVhfLZFbNx0eMiXDDEnrfE7e
J869UGz7fH+2gxs1XHrlF45w5KgOPte3Am4x9plrlpvFxB874ZjCW3d8XoU6Yc2c
WFJAtUHYWpAqwDRxZYHjFmbnHftaw4DtsnGXDjjQ8uv/Trls48SmCBQnyOcxQyQa
THhJJiRG9TXoSY88N3UHSpfDby3UJE63KKvxYEqzwnrBNYsqQUcorjb24RZnuh5t
0pBYZs7BVIEyyQEQgOJ4hjGZ6XEue/nvT5WZaTP7kYeKUOg1RjRs7rCO8G5Uu5nt
q1HEBp7EXdOV89swt5t1vQQQDHyJG0YO+hzHI10XUqSP+uR3hX1AWzli1CKZ9hAB
75hIihEhWRIk5HTgVlHo
=AENA
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
This fixes polarity of SD card write-protect pin on DA850 EVM
and fixes interrupt property for DA850 SoC GPIO as defined in
device-tree.
Both of these are not introduced with v4.18 merge but have
existed prior.
* tag 'davinci-fixes-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850: Fix interrups property for gpio
ARM: davinci: board-da850-evm: fix WP pin polarity for MMC/SD
Signed-off-by: Olof Johansson <olof@lixom.net>
- Added power capabilities for the mmc host controller on the
hikey and hikey960 boards to avoid broken wifi.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mr1l
-----END PGP SIGNATURE-----
Merge tag 'hisi-fixes-for-4.18' of git://github.com/hisilicon/linux-hisi into fixes
ARM64: hisi fixes for 4.18
- Added power capabilities for the mmc host controller on the
hikey and hikey960 boards to avoid broken wifi.
* tag 'hisi-fixes-for-4.18' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hikey960: Define wl1837 power capabilities
arm64: dts: hikey: Define wl1835 power capabilities
Signed-off-by: Olof Johansson <olof@lixom.net>
Before 8d85a7a4f2 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"),
pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual
functions". After 8d85a7a4f2, it means "we can't enable *any* VFs".
That broke this scenario where nfp intends to remove any limit on the
number of VFs that can be enabled:
nfp_pci_probe
nfp_pcie_sriov_read_nfd_limit
nfp_rtsym_read_le("nfd_vf_cfg_max_vfs", &err)
pci_sriov_set_totalvfs(pf->pdev, 0) # if FW didn't expose a limit
...
# userspace writes N to sysfs "sriov_numvfs":
sriov_numvfs_store
pci_sriov_get_totalvfs # now returns 0
return -ERANGE
Prior to 8d85a7a4f2, pci_sriov_get_totalvfs() returned TotalVFs, but it
now returns 0.
Remove the pci_sriov_set_totalvfs(pdev, 0) calls so we don't limit the
number of VFs that can be enabled.
Fixes: 8d85a7a4f2 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The TotalVFs register in the SR-IOV capability is the hardware limit on the
number of VFs. A PF driver can limit the number of VFs further with
pci_sriov_set_totalvfs(). When the PF driver is removed, reset any VF
limit that was imposed by the driver because that limit may not apply to
other drivers.
Before 8d85a7a4f2 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"),
pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual
functions", and the nfp driver used that to remove the VF limit when the
driver unloads.
8d85a7a4f2 broke that because instead of removing the VF limit,
pci_sriov_set_totalvfs(pdev, 0) actually sets the limit to zero, and that
limit persists even if another driver is loaded.
We could fix that by making the nfp driver reset the limit when it unloads,
but it seems more robust to do it in the PCI core instead of relying on the
driver.
The regression scenario is:
nfp_pci_probe (driver 1)
...
nfp_pci_remove
pci_sriov_set_totalvfs(pf->pdev, 0) # limits VFs to 0
...
nfp_pci_probe (driver 2)
nfp_rtsym_read_le("nfd_vf_cfg_max_vfs")
# no VF limit from firmware
Now driver 2 is broken because the VF limit is still 0 from driver 1.
Fixes: 8d85a7a4f2 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
[bhelgaas: changelog, rename functions]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Pull i2c fixes from Wolfram Sang:
- a revert because of bugzilla #200045 (and some documentation about
it)
- another regression fix in the i2c-gpio driver
- a leak fix for the i2c core
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: gpio: initialize SCL to HIGH again
i2c: smbus: kill memory leak on emulated and failed DMA SMBus xfers
i2c: algos: bit: mention our experience about initial states
Revert "i2c: algo-bit: init the bus to a known state"
The call to of_get_next_child() returns a node pointer with refcount
incremented thus it must be explicitly decremented here in the error
path and after the last usage.
Fixes: d3c68e0a7e ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
The call to of_get_next_child() returns a node pointer with
refcount incremented thus it must be explicitly decremented
here after the last usage.
Fixes: ab597d35ef ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The call to of_get_next_child() returns a node pointer with refcount
incremented thus it must be explicitly decremented here after the last
usage.
Fixes: 8961def568 ("PCI: xilinx: Add Xilinx AXI PCIe Host Bridge IP driver")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
[lorenzo.pieralisi@arm.com: reworked commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
