mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-12 21:57:43 +00:00
8161 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Changbin Du
|
25f69c69bc |
perf stat: Fix counting when initial delay configured
When creating counters with initial delay configured, the enable_on_exec
field is not set. So we need to enable the counters later. The problem
is, when a workload is specified the target__none() is true. So we also
need to check stat_config.initial_delay.
In this change, we add a new field 'initial_delay' for struct target
which could be shared by other subcommands. And define
target__enable_on_exec() which returns whether enable_on_exec should be
set on normal cases.
Before this fix the event is not counted:
$ ./perf stat -e instructions -D 100 sleep 2
Events disabled
Events enabled
Performance counter stats for 'sleep 2':
<not counted> instructions
1.901661124 seconds time elapsed
0.001602000 seconds user
0.000000000 seconds sys
After fix it works:
$ ./perf stat -e instructions -D 100 sleep 2
Events disabled
Events enabled
Performance counter stats for 'sleep 2':
404,214 instructions
1.901743475 seconds time elapsed
0.001617000 seconds user
0.000000000 seconds sys
Fixes:
|
||
|
Namhyung Kim
|
b48279af63 |
perf test: Fix offcpu test prev_state check
On Fedora 36, the 'perf record' offcpu profiling tests are failing. It was because the BPF checks the prev task's state being S or D but actually it has more bits set. Let's check the LSB 8 bits for the purpose of offcpu profiling. Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230218162724.1292657-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Steinar H. Gunderson
|
7e55b95651 |
perf intel-pt: Synthesize cycle events
There is no good reason why we cannot synthesize "cycle" events from Intel PT just as we can synthesize "instruction" events, in particular when CYC packets are available. This enables using PT to getting much more accurate cycle profiles than regular sampling (record -e cycles) when the work last for very short periods (<10 ms). Thus, add support for this, based off of the existing IPC calculation framework. The new option to --itrace is "y" (for cYcles), as c was taken for calls. Cycle and instruction events can be synthesized together, and are by default. The only real caveat is that CYC packets are only emitted whenever some other packet is, which in practice is when a branch instruction is encountered (and not even all branches). Thus, even at no subsampling (e.g. --itrace=y0ns), it is impossible to get more accuracy than a single basic block, and all cycles spent executing that block will get attributed to the branch instruction that ends the packet. Thus, one cannot know whether the cycles came from e.g. a specific load, a mispredicted branch, or something else. When subsampling (which is the default), the cycle events will get smeared out even more, but will still be generally useful to attribute cycle counts to functions. Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Steinar H. Gunderson <sesse@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220322082452.1429091-1-sesse@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Feng Tang
|
1470a108a6 |
perf c2c: Add report option to show false sharing in adjacent cachelines
Many platforms have feature of adjacent cachelines prefetch, when it is
enabled, for data in RAM of 2 cachelines (2N and 2N+1) granularity, if
one is fetched to cache, the other one could likely be fetched too,
which sort of extends the cacheline size to double, thus the false
sharing could happens in adjacent cachelines.
0Day has captured performance changed related with this [1], and some
commercial software explicitly makes its hot global variables 128 bytes
aligned (2 cache lines) to avoid this kind of extended false sharing.
So add an option "--double-cl" for 'perf c2c report' to show false
sharing in double cache line granularity, which acts just like the
cacheline size is doubled. There is no change to c2c record. The
hardware events of shared cacheline are still per cacheline, and this
option just changes the granularity of how events are grouped and
displayed.
In the 'perf c2c report' output below (will-it-scale's 'pagefault2' case
on old kernel):
----------------------------------------------------------------------
26 31 2 0 0 0 0xffff888103ec6000
----------------------------------------------------------------------
35.48% 50.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff8133148b 1153 66 971 3748 74 [k] get_mem_cgroup_from_mm
6.45% 0.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff813396e4 570 0 1531 879 75 [k] mem_cgroup_charge
25.81% 50.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81331472 949 70 593 3359 74 [k] get_mem_cgroup_from_mm
19.35% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81339686 1352 0 1073 1022 74 [k] mem_cgroup_charge
9.68% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff813396d6 1401 0 863 768 74 [k] mem_cgroup_charge
3.23% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81333106 618 0 804 11 9 [k] uncharge_batch
The offset 0x10 and 0x54 used to displayed in 2 groups, and now they are
listed together to give users a hint of extended false sharing.
[1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/
Committer notes:
Link: https://lore.kernel.org/r/Y+wvVNWqXb70l4uy@feng-clx
Removed -a, leaving just as --double-cl, as this probably is not used so
frequently and perhaps will be even auto-detected if we manage to record
the MSR where this is configured.
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Joe Mario <jmario@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230214075823.246414-1-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Ian Rogers
|
37f322cd58 |
perf stat: Avoid merging/aggregating metric counts twice
The added perf_stat_merge_counters combines uncore counters. When
metrics are enabled, the counts are merged into a metric_leader via the
stat-shadow saved_value logic. As the leader now is passed an aggregated
count, it leads to all counters being added together twice and counts
appearing approximately doubled in metrics.
This change disables the saved_value merging of counts for evsels that
are merged. It is recommended that later changes remove the saved_value
entirely as the two layers of aggregation in the code is confusing.
Fixes:
|
||
|
Thomas Richter
|
6a5558f116 |
perf tools: Fix perf tool build error in util/pfm.c
I have downloaded linux-next and build the perf tool using
# make LIBPFM4=1
to have libpfm4 support built into perf. The build fails:
# make LIBPFM4=1
....
INSTALL libbpf_headers
CC util/pfm.o
util/pfm.c: In function ‘print_libpfm_event’:
util/pfm.c:189:9: error: too many arguments to function ‘print_cb->print_event’
189 | print_cb->print_event(print_state,
| ^~~~~~~~
util/pfm.c:220:25: error: too many arguments to function ‘print_cb->print_event’
220 | print_cb->print_event(print_state,
The build error is caused by commit
|
||
|
Namhyung Kim
|
1bece1351c |
perf lock contention: Support old rw_semaphore type
The old kernel has a different type of the owner field in rwsem. We can check it using bpf_core_type_matches() builtin in clang but it also needs its own version check since it's available on recent versions. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hao Luo <haoluo@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20230207002403.63590-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
3477f079fe |
perf lock contention: Add -o/--lock-owner option
When there're many lock contentions in the system, people sometimes want
to know who caused the contention, IOW who's the owner of the locks.
The -o/--lock-owner option tries to follow the lock owners for the
contended mutexes and rwsems from BPF, and then attributes the
contention time to the owner instead of the waiter. It's a best effort
approach to get the owner info at the time of the contention and doesn't
guarantee to have the precise tracking of owners if it's changing over
time.
Currently it only handles mutex and rwsem that have owner field in their
struct and it basically points to a task_struct that owns the lock at
the moment.
Technically its type is atomic_long_t and it comes with some LSB bits
used for other meanings. So it needs to clear them when casting it to a
pointer to task_struct.
Also the atomic_long_t is a typedef of the atomic 32 or 64 bit types
depending on arch which is a wrapper struct for the counter value. I'm
not aware of proper ways to access those kernel atomic types from BPF so
I just read the internal counter value directly. Please let me know if
there's a better way.
When -o/--lock-owner option is used, it goes to the task aggregation
mode like -t/--threads option does. However it cannot get the owner for
other lock types like spinlock and sometimes even for mutex.
$ sudo ./perf lock con -abo -- ./perf bench sched pipe
# Running 'sched/pipe' benchmark:
# Executed 1000000 pipe operations between two processes
Total time: 4.766 [sec]
4.766540 usecs/op
209795 ops/sec
contended total wait max wait avg wait pid owner
403 565.32 us 26.81 us 1.40 us -1 Unknown
4 27.99 us 8.57 us 7.00 us 1583145 sched-pipe
1 8.25 us 8.25 us 8.25 us 1583144 sched-pipe
1 2.03 us 2.03 us 2.03 us 5068 chrome
As you can see, the owner is unknown for the most cases. But if we
filter only for the mutex locks, it'd more likely get the onwers.
$ sudo ./perf lock con -abo -Y mutex -- ./perf bench sched pipe
# Running 'sched/pipe' benchmark:
# Executed 1000000 pipe operations between two processes
Total time: 4.910 [sec]
4.910435 usecs/op
203647 ops/sec
contended total wait max wait avg wait pid owner
2 15.50 us 8.29 us 7.75 us 1582852 sched-pipe
7 7.20 us 2.47 us 1.03 us -1 Unknown
1 6.74 us 6.74 us 6.74 us 1582851 sched-pipe
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230207002403.63590-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Athira Rajeev
|
67ef66bad4 |
perf probe: Update the exit error codes in function try_to_find_probe_trace_event
try_to_find_probe_trace_events() uses return error code as ENOENT in two places. First place is after open_debuginfo() when opening debuginfo fails and secondly, after when not finding the probe point. This function is invoked during BPF load and there are other exit points in this code path which returns ENOENT. This makes it difficult to understand the exact reason for exit. Patches changes the exit code from ENOENT to: - ENODATA when it fails to find debuginfo - ENODEV when it fails to find probe point Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Disha Goel <disgoel@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230105121742.92249-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Kan Liang
|
d7d213e04c |
perf report: Support Retire Latency
The Retire Latency field is added in the var3_w of the PERF_SAMPLE_WEIGHT_STRUCT. The Retire Latency reports pipeline stall of this instruction compared to the previous instruction in cycles. That's quite useful to display the information with perf mem report. The p_stage_cyc for Power is also from the var3_w. Union the p_stage_cyc and retire_lat to share the code. Implement X86 specific codes to display the X86 specific header. Add a new sort key retire_lat for the Retire Latency. Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20230104201349.1451191-8-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
ebab291641 |
perf lock contention: Support filters for different aggregation
It'd be useful to filter other than the current aggregation mode. For
example, users may want to see callstacks for specific locks only. Or
they may want tasks from a certain callstack.
The tracepoints already collected the information but it needs to check
the condition again when processing the event. And it needs to change
BPF to allow the key combinations.
The lock contentions on 'rcu_state' spinlock can be monitored:
$ sudo perf lock con -abv -L rcu_state sleep 1
...
contended total wait max wait avg wait type caller
4 151.39 us 62.57 us 37.85 us spinlock rcu_core+0xcb
0xffffffff81fd1666 _raw_spin_lock_irqsave+0x46
0xffffffff8172d76b rcu_core+0xcb
0xffffffff822000eb __softirqentry_text_start+0xeb
0xffffffff816a0ba9 __irq_exit_rcu+0xc9
0xffffffff81fc0112 sysvec_apic_timer_interrupt+0xa2
0xffffffff82000e46 asm_sysvec_apic_timer_interrupt+0x16
0xffffffff81d49f78 cpuidle_enter_state+0xd8
0xffffffff81d4a259 cpuidle_enter+0x29
1 30.21 us 30.21 us 30.21 us spinlock rcu_core+0xcb
0xffffffff81fd1666 _raw_spin_lock_irqsave+0x46
0xffffffff8172d76b rcu_core+0xcb
0xffffffff822000eb __softirqentry_text_start+0xeb
0xffffffff816a0ba9 __irq_exit_rcu+0xc9
0xffffffff81fc00c4 sysvec_apic_timer_interrupt+0x54
0xffffffff82000e46 asm_sysvec_apic_timer_interrupt+0x16
1 28.84 us 28.84 us 28.84 us spinlock rcu_accelerate_cbs_unlocked+0x40
0xffffffff81fd1c60 _raw_spin_lock+0x30
0xffffffff81728cf0 rcu_accelerate_cbs_unlocked+0x40
0xffffffff8172da82 rcu_core+0x3e2
0xffffffff822000eb __softirqentry_text_start+0xeb
0xffffffff816a0ba9 __irq_exit_rcu+0xc9
0xffffffff81fc0112 sysvec_apic_timer_interrupt+0xa2
0xffffffff82000e46 asm_sysvec_apic_timer_interrupt+0x16
0xffffffff81d49f78 cpuidle_enter_state+0xd8
...
To see tasks calling 'rcu_core' function:
$ sudo perf lock con -abt -S rcu_core sleep 1
contended total wait max wait avg wait pid comm
19 23.46 us 2.21 us 1.23 us 0 swapper
2 18.37 us 17.01 us 9.19 us 2061859 ThreadPoolForeg
3 5.76 us 1.97 us 1.92 us 3909 pipewire-pulse
1 2.26 us 2.26 us 2.26 us 1809271 MediaSu~isor #2
1 1.97 us 1.97 us 1.97 us 1514882 Chrome_ChildIOT
1 987 ns 987 ns 987 ns 3740 pipewire-pulse
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230203021324.143540-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Namhyung Kim
|
16cad1d359 |
perf lock contention: Use lock_stat_find{,new}
This is a preparation work to support complex keys of BPF maps. Now it has single value key according to the aggregation mode like stack_id or pid. But we want to use a combination of those keys. Then lock_contention_read() should still aggregate the result based on the key that was requested by user. The other key info will be used for filtering. So instead of creating a lock_stat entry always, Check if it's already there using lock_stat_find() first. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Hao Luo <haoluo@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20230203021324.143540-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
492fef218a |
perf lock contention: Factor out lock_contention_get_name()
The lock_contention_get_name() returns a name for the lock stat entry based on the current aggregation mode. As it's called sequentially in a single thread, it can return the address of a static buffer for symbol and offset of the caller. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Hao Luo <haoluo@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20230203021324.143540-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Rob Herring
|
7105311c2d |
perf arm-spe: Add raw decoding for SPEv1.2 previous branch address
Arm SPEv1.2 adds a new optional address packet type: previous branch target. The recorded address is the target virtual address of the most recently taken branch in program order. Add support for decoding the address packet in raw dumps. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230203162401.132931-1-robh@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
3340a08354 |
perf pmu-events: Fix testing with JEVENTS_ARCH=all
The #slots literal will return NAN when not on ARM64 which causes a
perf test failure when not on an ARM64 for a JEVENTS_ARCH=all build:
..
10.4: Parsing of PMU event table metrics with fake PMUs : FAILED!
..
Add an is_test boolean so that the failure can be avoided when running
as a test.
Fixes:
|
||
|
Ian Rogers
|
f8ea2c1524 |
perf pmu-events: Introduce pmu_metrics_table
Add a metrics table that is just a cast from pmu_events_table. This changes the APIs so that event and metric usage of the underlying table is different. For the no jevents case the tables are already separate, later changes will separate the tables for the jevents case. Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Caleb Biggers <caleb.biggers@intel.com> Cc: Florian Fischer <florian.fischer@muhq.space> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kang Minchul <tegongkang@gmail.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Perry Taylor <perry.taylor@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Rob Herring <robh@kernel.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230126233645.200509-10-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
6f8f98ab6c |
perf stat: Remove evsel metric_name/expr
Metrics are their own unit and these variables held broken metrics previously and now just hold the value NULL. Remove code that used these variables. Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Caleb Biggers <caleb.biggers@intel.com> Cc: Florian Fischer <florian.fischer@muhq.space> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kang Minchul <tegongkang@gmail.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Perry Taylor <perry.taylor@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Rob Herring <robh@kernel.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230126233645.200509-8-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
d9dc8874d6 |
perf pmu-events: Remove now unused event and metric variables
Previous changes separated the uses of pmu_event and pmu_metric,
however, both structures contained all the variables of event and
metric. This change removes the event variables from metric and the
metric variables from event.
Note, this change removes the setting of evsel's metric_name/expr as
these fields are no longer part of struct pmu_event. The metric
remains but is no longer implicitly requested when the event is. This
impacts a few Intel uncore events, however, as the ScaleUnit is shared
by the event and the metric this utility is questionable. Also the
MetricNames look broken (contain spaces) in some cases and when trying
to use the functionality with '-e' the metrics fail but regular
metrics with '-M' work. For example, on SkylakeX '-M' works:
```
$ perf stat -M LLC_MISSES.PCIE_WRITE -a sleep 1
Performance counter stats for 'system wide':
0 UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 # 57896.0 Bytes LLC_MISSES.PCIE_WRITE (49.84%)
7,174 UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 (49.85%)
0 UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 (50.16%)
63 UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 (50.15%)
1.004576381 seconds time elapsed
```
whilst the event '-e' version is broken even with --group/-g (fwiw, we should also remove -g [1]):
```
$ perf stat -g -e LLC_MISSES.PCIE_WRITE -g -a sleep 1
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Performance counter stats for 'system wide':
27,316 Bytes LLC_MISSES.PCIE_WRITE
1.004505469 seconds time elapsed
```
The code also carries warnings where the user is supposed to select
events for metrics [2] but given the lack of use of such a feature,
let's clean the code and just remove.
[1] https://lore.kernel.org/lkml/20220707195610.303254-1-irogers@google.com/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/perf/util/stat-shadow.c?id=01b8957b738f42f96a130079bc951b3cc78c5b8a#n425
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Ian Rogers
|
96d2a74618 |
perf pmu-events: Separate the metrics from events for no jevents
Separate the event and metric table when building without jevents. Add find_core_metrics_table and perf_pmu__find_metrics_table while renaming existing utilities to be event specific, so that users can find the right table for their need. Committer notes: Fix the build on aarch64 with: tools/perf/arch/arm64/util/pmu.c @@ -32,7 +32,7 @@ const struct pmu_events_table *pmu_events_table__find(void) - return perf_pmu__find_table(pmu); + return perf_pmu__find_events_table(pmu); Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Caleb Biggers <caleb.biggers@intel.com> Cc: Florian Fischer <florian.fischer@muhq.space> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kang Minchul <tegongkang@gmail.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Perry Taylor <perry.taylor@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Rob Herring <robh@kernel.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230126233645.200509-6-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
db95818e88 |
perf pmu-events: Add separate metric from pmu_event
Create a new pmu_metric for the metric related variables from pmu_event but that is initially just a clone of pmu_event. Add iterators for pmu_metric and use in places that metrics are desired rather than events. Make the event iterator skip metric only events, and the metric iterator skip event only events. Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Caleb Biggers <caleb.biggers@intel.com> Cc: Florian Fischer <florian.fischer@muhq.space> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kang Minchul <tegongkang@gmail.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Perry Taylor <perry.taylor@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Rob Herring <robh@kernel.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230126233645.200509-5-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Sandipan Das
|
8eaf8ec3c0 |
perf session: Show branch speculation info in raw dump
Show the branch speculation info if provided by the branch recording hardware feature. This can be useful for purposes of code optimization. E.g. $ perf record -j any,u ./test_branch $ perf report --dump-raw-trace Before: [...] 8380958377610 0x40b178 [0x1b0]: PERF_RECORD_SAMPLE(IP, 0x2): 7952/7952: 0x4f851a period: 48973 addr: 0 ... branch stack: nr:16 ..... 0: 00000000004b52fd -> 00000000004f82c0 0 cycles P 0 ..... 1: ffffffff8220137c -> 00000000004b52f0 0 cycles M 0 ..... 2: 000000000041d1c4 -> 00000000004b52f0 0 cycles P 0 ..... 3: 00000000004e7ead -> 000000000041d1b0 0 cycles M 0 ..... 4: 00000000004e7f91 -> 00000000004e7ead 0 cycles P 0 ..... 5: 00000000004e7ea8 -> 00000000004e7f70 0 cycles P 0 ..... 6: 00000000004e7e52 -> 00000000004e7e98 0 cycles M 0 ..... 7: 00000000004e7e1f -> 00000000004e7e40 0 cycles M 0 ..... 8: 00000000004e7f60 -> 00000000004e7df0 0 cycles P 0 ..... 9: 00000000004e7f58 -> 00000000004e7f60 0 cycles M 0 ..... 10: 000000000041d85d -> 00000000004e7f50 0 cycles P 0 ..... 11: 000000000043306a -> 000000000041d840 0 cycles P 0 ..... 12: ffffffff8220137c -> 0000000000433040 0 cycles M 0 ..... 13: 000000000041e4a1 -> 0000000000433040 0 cycles P 0 ..... 14: ffffffff8220137c -> 000000000041e490 0 cycles M 0 ..... 15: 000000000041d89b -> 000000000041e487 0 cycles P 0 ... thread: test_branch:7952 ...... dso: /data/sandipan/test_branch [...] After: [...] 8380958377610 0x40b178 [0x1b0]: PERF_RECORD_SAMPLE(IP, 0x2): 7952/7952: 0x4f851a period: 48973 addr: 0 ... branch stack: nr:16 ..... 0: 00000000004b52fd -> 00000000004f82c0 0 cycles P 0 NON_SPEC_CORRECT_PATH ..... 1: ffffffff8220137c -> 00000000004b52f0 0 cycles M 0 NON_SPEC_CORRECT_PATH ..... 2: 000000000041d1c4 -> 00000000004b52f0 0 cycles P 0 NON_SPEC_CORRECT_PATH ..... 3: 00000000004e7ead -> 000000000041d1b0 0 cycles M 0 NON_SPEC_CORRECT_PATH ..... 4: 00000000004e7f91 -> 00000000004e7ead 0 cycles P 0 NON_SPEC_CORRECT_PATH ..... 5: 00000000004e7ea8 -> 00000000004e7f70 0 cycles P 0 NON_SPEC_CORRECT_PATH ..... 6: 00000000004e7e52 -> 00000000004e7e98 0 cycles M 0 SPEC_CORRECT_PATH ..... 7: 00000000004e7e1f -> 00000000004e7e40 0 cycles M 0 NON_SPEC_CORRECT_PATH ..... 8: 00000000004e7f60 -> 00000000004e7df0 0 cycles P 0 NON_SPEC_CORRECT_PATH ..... 9: 00000000004e7f58 -> 00000000004e7f60 0 cycles M 0 NON_SPEC_CORRECT_PATH ..... 10: 000000000041d85d -> 00000000004e7f50 0 cycles P 0 NON_SPEC_CORRECT_PATH ..... 11: 000000000043306a -> 000000000041d840 0 cycles P 0 NON_SPEC_CORRECT_PATH ..... 12: ffffffff8220137c -> 0000000000433040 0 cycles M 0 NON_SPEC_CORRECT_PATH ..... 13: 000000000041e4a1 -> 0000000000433040 0 cycles P 0 NON_SPEC_CORRECT_PATH ..... 14: ffffffff8220137c -> 000000000041e490 0 cycles M 0 NON_SPEC_CORRECT_PATH ..... 15: 000000000041d89b -> 000000000041e487 0 cycles P 0 NON_SPEC_CORRECT_PATH ... thread: test_branch:7952 ...... dso: /data/sandipan/test_branch [...] With the addition of new branch flags, the "brstacksym" fields in perf script output now shows speculation information after the branch type. Change the regular expressions accordingly for the test to pass. Since branch speculation information may vary across platforms, the test does not look for specific values. E.g. $ perf test -v 110 Before: 110: Check branch stack sampling : --- start --- test child forked, pid 54154 Testing user branch stack sampling + grep -E -m1 ^brstack_bench\+[^ ]*/brstack_foo\+[^ ]*/IND_CALL$ /tmp/__perf_test.program.AfhUI/perf.script + cleanup + rm -rf /tmp/__perf_test.program.AfhUI test child finished with -1 ---- end ---- Check branch stack sampling: FAILED! After: 110: Check branch stack sampling : --- start --- test child forked, pid 43716 Testing user branch stack sampling + grep -E -m1 ^brstack_bench\+[^ ]*/brstack_foo\+[^ ]*/IND_CALL/.*$ /tmp/__perf_test.program.xgzAi/perf.script brstack_bench+0x66/brstack_foo+0x0/P/-/-/0/IND_CALL/NON_SPEC_CORRECT_PATH + grep -E -m1 ^brstack_foo\+[^ ]*/brstack_bar\+[^ ]*/CALL/.*$ /tmp/__perf_test.program.xgzAi/perf.script brstack_foo+0x1b/brstack_bar+0x0/P/-/-/0/CALL/NON_SPEC_CORRECT_PATH + grep -E -m1 ^brstack_bench\+[^ ]*/brstack_foo\+[^ ]*/CALL/.*$ /tmp/__perf_test.program.xgzAi/perf.script brstack_bench+0x58/brstack_foo+0x0/P/-/-/0/CALL/NON_SPEC_CORRECT_PATH + grep -E -m1 ^brstack_bench\+[^ ]*/brstack_bar\+[^ ]*/CALL/.*$ /tmp/__perf_test.program.xgzAi/perf.script brstack_bench+0x5d/brstack_bar+0x0/P/-/-/0/CALL/NON_SPEC_CORRECT_PATH + grep -E -m1 ^brstack_bar\+[^ ]*/brstack_foo\+[^ ]*/RET/.*$ /tmp/__perf_test.program.xgzAi/perf.script brstack_bar+0x31/brstack_foo+0x20/P/-/-/0/RET/NON_SPEC_CORRECT_PATH + grep -E -m1 ^brstack_foo\+[^ ]*/brstack_bench\+[^ ]*/RET/.*$ /tmp/__perf_test.program.xgzAi/perf.script brstack_foo+0x36/brstack_bench+0x5d/P/-/-/0/RET/NON_SPEC_CORRECT_PATH + grep -E -m1 ^brstack_bench\+[^ ]*/brstack_bench\+[^ ]*/COND/.*$ /tmp/__perf_test.program.xgzAi/perf.script brstack_bench+0x76/brstack_bench+0x7d/P/-/-/0/COND/NON_SPEC_CORRECT_PATH + grep -E -m1 ^brstack\+[^ ]*/brstack\+[^ ]*/UNCOND/.*$ /tmp/__perf_test.program.xgzAi/perf.script brstack+0x5a/brstack+0x41/P/-/-/0/UNCOND/NON_SPEC_CORRECT_PATH + set +x Testing branch stack filtering permutation (any_call,CALL|IND_CALL|COND_CALL|SYSCALL|IRQ) Testing branch stack filtering permutation (call,CALL|SYSCALL) Testing branch stack filtering permutation (cond,COND) Testing branch stack filtering permutation (any_ret,RET|COND_RET|SYSRET|ERET) Testing branch stack filtering permutation (call,cond,CALL|SYSCALL|COND) Testing branch stack filtering permutation (any_call,cond,CALL|IND_CALL|COND_CALL|IRQ|SYSCALL|COND) Testing branch stack filtering permutation (cond,any_call,any_ret,COND|CALL|IND_CALL|COND_CALL|SYSCALL|IRQ|RET|COND_RET|SYSRET|ERET) test child finished with 0 ---- end ---- Check branch stack sampling: Ok Signed-off-by: Sandipan Das <sandipan.das@amd.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: x86@kernel.org Link: https://lore.kernel.org/r/048d67c9de3cc8e3dbf19aaa7ff718dec91364c5.1675333809.git.sandipan.das@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Sandipan Das
|
6ade6c6460 |
perf script: Show branch speculation info
Show the branch speculation info if provided by the branch recording hardware feature. This can be useful for optimizing code further. The speculation info is appended to the end of the list of fields so any existing tools that use "/" as a delimiter for access fields via an index remain unaffected. Also show "-" instead of "N/A" when speculation info is unavailable because "/" is used as the field separator. E.g. $ perf record -j any,u,save_type ./test_branch $ perf script --fields brstacksym Before: [...] check_match+0x60/strcmp+0x0/P/-/-/0/CALL do_lookup_x+0x3c5/check_match+0x0/P/-/-/0/CALL [...] After: [...] check_match+0x60/strcmp+0x0/P/-/-/0/CALL/NON_SPEC_CORRECT_PATH do_lookup_x+0x3c5/check_match+0x0/P/-/-/0/CALL/NON_SPEC_CORRECT_PATH [...] The bitfield swapping scheme used duing sample parsing has changed because of the addition of new branch flags, namely "spec", "new_type" and "priv". Earlier, these were all part of the "reserved" field but now, each of these fields get swapped separately. Change the expected flag values accordingly for the test to pass. E.g. $ perf test -v 27 Before: 27: Sample parsing : --- start --- test child forked, pid 61979 parsing failed for sample_type 0x800 test child finished with -1 ---- end ---- Sample parsing: FAILED! After: 27: Sample parsing : --- start --- test child forked, pid 63293 test child finished with 0 ---- end ---- Sample parsing: Ok Signed-off-by: Sandipan Das <sandipan.das@amd.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: x86@kernel.org Link: https://lore.kernel.org/r/56e272583552526e999ba0b536ac009ae3613966.1675333809.git.sandipan.das@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
dd15480a3d |
perf stat: Hide invalid uncore event output for aggr mode
The current display code for perf stat iterates given cpus and build the
aggr map to collect the event data for the aggregation mode.
But uncore events have their own cpu maps and it won't guarantee that
it'd match to the aggr map. For example, per-package uncore events
would generate a single value for each socket. When user asks per-core
aggregation mode, the output would contain 0 values for other cores.
Thus it needs to check the uncore PMU's cpumask and if it matches to the
current aggregation id.
Before:
$ sudo ./perf stat -a --per-core -e power/energy-pkg/ sleep 1
Performance counter stats for 'system wide':
S0-D0-C0 1 3.73 Joules power/energy-pkg/
S0-D0-C1 0 <not counted> Joules power/energy-pkg/
S0-D0-C2 0 <not counted> Joules power/energy-pkg/
S0-D0-C3 0 <not counted> Joules power/energy-pkg/
1.001404046 seconds time elapsed
Some events weren't counted. Try disabling the NMI watchdog:
echo 0 > /proc/sys/kernel/nmi_watchdog
perf stat ...
echo 1 > /proc/sys/kernel/nmi_watchdog
The core 1, 2 and 3 should not be printed because the event is handled
in a cpu in the core 0 only. With this change, the output becomes like
below.
After:
$ sudo ./perf stat -a --per-core -e power/energy-pkg/ sleep 1
Performance counter stats for 'system wide':
S0-D0-C0 1 2.09 Joules power/energy-pkg/
Fixes:
|
||
|
Namhyung Kim
|
7b204399ae |
perf lock contention: Add -S/--callstack-filter option
The -S/--callstack-filter is to limit display entries having the given
string in the callstack (not only in the caller in the output).
The following example shows lock contention results if the callstack
has 'net' substring somewhere. Note that the caller '__dev_queue_xmit'
does not match to it, but it has 'inet6_csk_xmit' in the callstack.
This applies even if you don't use -v option to show the full callstack.
$ sudo ./perf lock con -abv -S net sleep 1
...
contended total wait max wait avg wait type caller
5 70.20 us 16.13 us 14.04 us spinlock __dev_queue_xmit+0xb6d
0xffffffffa5dd1c60 _raw_spin_lock+0x30
0xffffffffa5b8f6ed __dev_queue_xmit+0xb6d
0xffffffffa5cd8267 ip6_finish_output2+0x2c7
0xffffffffa5cdac14 ip6_finish_output+0x1d4
0xffffffffa5cdb477 ip6_xmit+0x457
0xffffffffa5d1fd17 inet6_csk_xmit+0xd7
0xffffffffa5c5f4aa __tcp_transmit_skb+0x54a
0xffffffffa5c6467d tcp_keepalive_timer+0x2fd
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230126000936.3017683-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Rob Herring
|
2889959489 |
perf arm-spe: Only warn once for each unsupported address packet
Unknown address packet indexes are not an error as the Arm architecture can (and has with SPEv1.2) define new ones and implementation defined ones are also allowed. The error message for every occurrence of the packet is needlessly noisy as well. Change the message to print just once for each unknown index. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20230127205546.667740-1-robh@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Krister Johansen
|
1c24956542 |
perf symbols: Symbol lookup with kcore can fail if multiple segments match stext
This problem was encountered on an arm64 system with a lot of memory. Without kernel debug symbols installed, and with both kcore and kallsyms available, perf managed to get confused and returned "unknown" for all of the kernel symbols that it tried to look up. On this system, stext fell within the vmalloc segment. The kcore symbol matching code tries to find the first segment that contains stext and uses that to replace the segment generated from just the kallsyms information. In this case, however, there were two: a very large vmalloc segment, and the text segment. This caused perf to get confused because multiple overlapping segments were inserted into the RB tree that holds the discovered segments. However, that alone wasn't sufficient to cause the problem. Even when we could find the segment, the offsets were adjusted in such a way that the newly generated symbols didn't line up with the instruction addresses in the trace. The most obvious solution would be to consult which segment type is text from kcore, but this information is not exposed to users. Instead, select the smallest matching segment that contains stext instead of the first matching segment. This allows us to match the text segment instead of vmalloc, if one is contained within the other. Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Reaver <me@davidreaver.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20230125183418.GD1963@templeofstupid.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Adrian Hunter
|
ce4c8e7966 |
perf symbols: Get symbols for .plt.got for x86-64
For x86_64, determine a symbol for .plt.got entries. That requires
computing the target offset and finding that in .rela.dyn, which in
turn means .rela.dyn needs to be sorted by offset.
Example:
In this example, the GNU C Library is using .plt.got for malloc and
free.
Before:
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.027 MB perf.data ]
$ perf script --itrace=be --ns -F-event,+addr,-period,-comm,-tid,-cpu > /tmp/cmp1.txt
After:
$ perf script --itrace=be --ns -F-event,+addr,-period,-comm,-tid,-cpu > /tmp/cmp2.txt
$ diff /tmp/cmp1.txt /tmp/cmp2.txt | head -12
15509,15510c15509,15510
< 27046.755390907: 7f0b2943e3ab _nl_normalize_codeset+0x5b (/usr/lib/x86_64-linux-gnu/libc.so.6) => 7f0b29428380 offset_0x28380@plt+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
< 27046.755390907: 7f0b29428384 offset_0x28380@plt+0x4 (/usr/lib/x86_64-linux-gnu/libc.so.6) => 7f0b294a5120 malloc+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
---
> 27046.755390907: 7f0b2943e3ab _nl_normalize_codeset+0x5b (/usr/lib/x86_64-linux-gnu/libc.so.6) => 7f0b29428380 malloc@plt+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
> 27046.755390907: 7f0b29428384 malloc@plt+0x4 (/usr/lib/x86_64-linux-gnu/libc.so.6) => 7f0b294a5120 malloc+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
15821,15822c15821,15822
< 27046.755394865: 7f0b2943850c _nl_load_locale_from_archive+0x5bc (/usr/lib/x86_64-linux-gnu/libc.so.6) => 7f0b29428370 offset_0x28370@plt+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
< 27046.755394865: 7f0b29428374 offset_0x28370@plt+0x4 (/usr/lib/x86_64-linux-gnu/libc.so.6) => 7f0b294a5460 cfree@GLIBC_2.2.5+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
---
> 27046.755394865: 7f0b2943850c _nl_load_locale_from_archive+0x5bc (/usr/lib/x86_64-linux-gnu/libc.so.6) => 7f0b29428370 free@plt+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
> 27046.755394865: 7f0b29428374 free@plt+0x4 (/usr/lib/x86_64-linux-gnu/libc.so.6) => 7f0b294a5460 cfree@GLIBC_2.2.5+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Adrian Hunter
|
51a188ad8c |
perf symbols: Start adding support for .plt.got for x86
For x86, .plt.got is used, for example, when the address is taken of a
dynamically linked function. Start adding support by synthesizing a
symbol for each entry. A subsequent patch will attempt to get a better
name for the symbol.
Example:
Before:
$ cat tstpltlib.c
void fn1(void) {}
void fn2(void) {}
void fn3(void) {}
void fn4(void) {}
$ cat tstpltgot.c
void fn1(void);
void fn2(void);
void fn3(void);
void fn4(void);
void callfn(void (*fn)(void))
{
fn();
}
int main()
{
fn4();
fn1();
callfn(fn3);
fn2();
fn3();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -Wall -Wextra -shared -o libtstpltlib.so tstpltlib.c
$ gcc -Wall -Wextra -o tstpltgot tstpltgot.c -L . -ltstpltlib -Wl,-rpath="$(pwd)"
$ readelf -SW tstpltgot | grep 'Name\|plt\|dyn'
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[ 6] .dynsym DYNSYM 00000000000003d8 0003d8 0000f0 18 A 7 1 8
[ 7] .dynstr STRTAB 00000000000004c8 0004c8 0000c6 00 A 0 0 1
[10] .rela.dyn RELA 00000000000005d8 0005d8 0000d8 18 A 6 0 8
[11] .rela.plt RELA 00000000000006b0 0006b0 000048 18 AI 6 24 8
[13] .plt PROGBITS 0000000000001020 001020 000040 10 AX 0 0 16
[14] .plt.got PROGBITS 0000000000001060 001060 000020 10 AX 0 0 16
[15] .plt.sec PROGBITS 0000000000001080 001080 000030 10 AX 0 0 16
[23] .dynamic DYNAMIC 0000000000003d90 002d90 000210 10 WA 7 0 8
$ perf record -e intel_pt//u --filter 'filter main @ ./tstpltgot , filter callfn @ ./tstpltgot' ./tstpltgot
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data ]
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
28393.810326915: tr strt 0 [unknown] => 562350baa1b2 main+0x0
28393.810326915: tr end call 562350baa1ba main+0x8 => 562350baa090 fn4@plt+0x0
28393.810326917: tr strt 0 [unknown] => 562350baa1bf main+0xd
28393.810326917: tr end call 562350baa1bf main+0xd => 562350baa080 fn1@plt+0x0
28393.810326917: tr strt 0 [unknown] => 562350baa1c4 main+0x12
28393.810326917: call 562350baa1ce main+0x1c => 562350baa199 callfn+0x0
28393.810326917: tr end call 562350baa1ad callfn+0x14 => 7f607d36110f fn3+0x0
28393.810326922: tr strt 0 [unknown] => 562350baa1af callfn+0x16
28393.810326922: return 562350baa1b1 callfn+0x18 => 562350baa1d3 main+0x21
28393.810326922: tr end call 562350baa1d3 main+0x21 => 562350baa0a0 fn2@plt+0x0
28393.810326924: tr strt 0 [unknown] => 562350baa1d8 main+0x26
28393.810326924: tr end call 562350baa1d8 main+0x26 => 562350baa060 [unknown] <- call to fn3 via .plt.got
28393.810326925: tr strt 0 [unknown] => 562350baa1dd main+0x2b
28393.810326925: tr end return 562350baa1e3 main+0x31 => 7f607d029d90 __libc_start_call_main+0x80
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
28393.810326915: tr strt 0 [unknown] => 562350baa1b2 main+0x0
28393.810326915: tr end call 562350baa1ba main+0x8 => 562350baa090 fn4@plt+0x0
28393.810326917: tr strt 0 [unknown] => 562350baa1bf main+0xd
28393.810326917: tr end call 562350baa1bf main+0xd => 562350baa080 fn1@plt+0x0
28393.810326917: tr strt 0 [unknown] => 562350baa1c4 main+0x12
28393.810326917: call 562350baa1ce main+0x1c => 562350baa199 callfn+0x0
28393.810326917: tr end call 562350baa1ad callfn+0x14 => 7f607d36110f fn3+0x0
28393.810326922: tr strt 0 [unknown] => 562350baa1af callfn+0x16
28393.810326922: return 562350baa1b1 callfn+0x18 => 562350baa1d3 main+0x21
28393.810326922: tr end call 562350baa1d3 main+0x21 => 562350baa0a0 fn2@plt+0x0
28393.810326924: tr strt 0 [unknown] => 562350baa1d8 main+0x26
28393.810326924: tr end call 562350baa1d8 main+0x26 => 562350baa060 offset_0x1060@plt+0x0
28393.810326925: tr strt 0 [unknown] => 562350baa1dd main+0x2b
28393.810326925: tr end return 562350baa1e3 main+0x31 => 7f607d029d90 __libc_start_call_main+0x80
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Adrian Hunter
|
a1ab12856f |
perf symbols: Allow for static executables with .plt
A statically linked executable can have a .plt due to IFUNCs, in which
case .symtab is used not .dynsym. Check the section header link to see
if that is the case, and then use symtab instead.
Example:
Before:
$ cat tstifunc.c
#include <stdio.h>
void thing1(void)
{
printf("thing1\n");
}
void thing2(void)
{
printf("thing2\n");
}
typedef void (*thing_fn_t)(void);
thing_fn_t thing_ifunc(void)
{
int x;
if (x & 1)
return thing2;
return thing1;
}
void thing(void) __attribute__ ((ifunc ("thing_ifunc")));
int main()
{
thing();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -static -Wall -Wextra -Wno-uninitialized -o tstifuncstatic tstifunc.c
$ readelf -SW tstifuncstatic | grep 'Name\|plt\|dyn'
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[ 4] .rela.plt RELA 00000000004002e8 0002e8 000258 18 AI 29 20 8
[ 6] .plt PROGBITS 0000000000401020 001020 000190 00 AX 0 0 16
[20] .got.plt PROGBITS 00000000004c5000 0c4000 0000e0 08 WA 0 0 8
$ perf record -e intel_pt//u --filter 'filter main @ ./tstifuncstatic' ./tstifuncstatic
thing1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.008 MB perf.data ]
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
15786.690189535: tr strt 0 [unknown] => 4017cd main+0x0
15786.690189535: tr end call 4017d5 main+0x8 => 401170 [unknown]
15786.690197660: tr strt 0 [unknown] => 4017da main+0xd
15786.690197660: tr end return 4017e0 main+0x13 => 401c1a __libc_start_call_main+0x6a
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
15786.690189535: tr strt 0 [unknown] => 4017cd main+0x0
15786.690189535: tr end call 4017d5 main+0x8 => 401170 thing_ifunc@plt+0x0
15786.690197660: tr strt 0 [unknown] => 4017da main+0xd
15786.690197660: tr end return 4017e0 main+0x13 => 401c1a __libc_start_call_main+0x6a
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Adrian Hunter
|
60fbb3e49a |
perf symbols: Allow for .plt without header
A static executable can have a .plt due to the presence of IFUNCs. In that case the .plt does not have a header. Check for whether there is a header by comparing the number of entries to the number of relocation entries. Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20230131131625.6964-7-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Adrian Hunter
|
b7dbc0be6e |
perf symbols: Add support for IFUNC symbols for x86_64
For x86_64, the GNU linker is putting IFUNC information in the relocation
addend, so use it to try to find a symbol for plt entries that refer to
IFUNCs.
Example:
Before:
$ cat tstpltlib.c
void fn1(void) {}
void fn2(void) {}
void fn3(void) {}
void fn4(void) {}
$ cat tstpltifunc.c
#include <stdio.h>
void thing1(void)
{
printf("thing1\n");
}
void thing2(void)
{
printf("thing2\n");
}
typedef void (*thing_fn_t)(void);
thing_fn_t thing_ifunc(void)
{
int x;
if (x & 1)
return thing2;
return thing1;
}
void thing(void) __attribute__ ((ifunc ("thing_ifunc")));
void fn1(void);
void fn2(void);
void fn3(void);
void fn4(void);
int main()
{
fn4();
fn1();
thing();
fn2();
fn3();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -Wall -Wextra -shared -o libtstpltlib.so tstpltlib.c
$ gcc -Wall -Wextra -Wno-uninitialized -o tstpltifunc tstpltifunc.c -L . -ltstpltlib -Wl,-rpath="$(pwd)"
$ readelf -rW tstpltifunc | grep -A99 plt
Relocation section '.rela.plt' at offset 0x738 contains 8 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000003f98 0000000300000007 R_X86_64_JUMP_SLOT 0000000000000000 puts@GLIBC_2.2.5 + 0
0000000000003fa8 0000000400000007 R_X86_64_JUMP_SLOT 0000000000000000 __stack_chk_fail@GLIBC_2.4 + 0
0000000000003fb0 0000000500000007 R_X86_64_JUMP_SLOT 0000000000000000 fn1 + 0
0000000000003fb8 0000000600000007 R_X86_64_JUMP_SLOT 0000000000000000 fn3 + 0
0000000000003fc0 0000000800000007 R_X86_64_JUMP_SLOT 0000000000000000 fn4 + 0
0000000000003fc8 0000000900000007 R_X86_64_JUMP_SLOT 0000000000000000 fn2 + 0
0000000000003fd0 0000000b00000007 R_X86_64_JUMP_SLOT 0000000000000000 getrandom@GLIBC_2.25 + 0
0000000000003fa0 0000000000000025 R_X86_64_IRELATIVE 125d
$ perf record -e intel_pt//u --filter 'filter main @ ./tstpltifunc' ./tstpltifunc
thing2
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
21860.073683659: tr strt 0 [unknown] => 561e212c42be main+0x0
21860.073683659: tr end call 561e212c42c6 main+0x8 => 561e212c4110 fn4@plt+0x0
21860.073683661: tr strt 0 [unknown] => 561e212c42cb main+0xd
21860.073683661: tr end call 561e212c42cb main+0xd => 561e212c40f0 fn1@plt+0x0
21860.073683661: tr strt 0 [unknown] => 561e212c42d0 main+0x12
21860.073683661: tr end call 561e212c42d0 main+0x12 => 561e212c40d0 offset_0x10d0@plt+0x0
21860.073698451: tr strt 0 [unknown] => 561e212c42d5 main+0x17
21860.073698451: tr end call 561e212c42d5 main+0x17 => 561e212c4120 fn2@plt+0x0
21860.073698451: tr strt 0 [unknown] => 561e212c42da main+0x1c
21860.073698451: tr end call 561e212c42da main+0x1c => 561e212c4100 fn3@plt+0x0
21860.073698452: tr strt 0 [unknown] => 561e212c42df main+0x21
21860.073698452: tr end return 561e212c42e5 main+0x27 => 7fb51cc29d90 __libc_start_call_main+0x80
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
21860.073683659: tr strt 0 [unknown] => 561e212c42be main+0x0
21860.073683659: tr end call 561e212c42c6 main+0x8 => 561e212c4110 fn4@plt+0x0
21860.073683661: tr strt 0 [unknown] => 561e212c42cb main+0xd
21860.073683661: tr end call 561e212c42cb main+0xd => 561e212c40f0 fn1@plt+0x0
21860.073683661: tr strt 0 [unknown] => 561e212c42d0 main+0x12
21860.073683661: tr end call 561e212c42d0 main+0x12 => 561e212c40d0 thing_ifunc@plt+0x0
21860.073698451: tr strt 0 [unknown] => 561e212c42d5 main+0x17
21860.073698451: tr end call 561e212c42d5 main+0x17 => 561e212c4120 fn2@plt+0x0
21860.073698451: tr strt 0 [unknown] => 561e212c42da main+0x1c
21860.073698451: tr end call 561e212c42da main+0x1c => 561e212c4100 fn3@plt+0x0
21860.073698452: tr strt 0 [unknown] => 561e212c42df main+0x21
21860.073698452: tr end return 561e212c42e5 main+0x27 => 7fb51cc29d90 __libc_start_call_main+0x80
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Adrian Hunter
|
05963491c0 |
perf symbols: Record whether a symbol is an alias for an IFUNC symbol
To assist with synthesizing plt symbols for IFUNCs, record whether a symbol is an alias of an IFUNC symbol. Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20230131131625.6964-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Adrian Hunter
|
78250284b1 |
perf symbols: Sort plt relocations for x86
For x86, with the addition of IFUNCs, relocation information becomes
disordered with respect to plt. Correct that by sorting the relocations by
offset.
Example:
Before:
$ cat tstpltlib.c
void fn1(void) {}
void fn2(void) {}
void fn3(void) {}
void fn4(void) {}
$ cat tstpltifunc.c
#include <stdio.h>
void thing1(void)
{
printf("thing1\n");
}
void thing2(void)
{
printf("thing2\n");
}
typedef void (*thing_fn_t)(void);
thing_fn_t thing_ifunc(void)
{
int x;
if (x & 1)
return thing2;
return thing1;
}
void thing(void) __attribute__ ((ifunc ("thing_ifunc")));
void fn1(void);
void fn2(void);
void fn3(void);
void fn4(void);
int main()
{
fn4();
fn1();
thing();
fn2();
fn3();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -Wall -Wextra -shared -o libtstpltlib.so tstpltlib.c
$ gcc -Wall -Wextra -Wno-uninitialized -o tstpltifunc tstpltifunc.c -L . -ltstpltlib -Wl,-rpath="$(pwd)"
$ readelf -rW tstpltifunc | grep -A99 plt
Relocation section '.rela.plt' at offset 0x738 contains 8 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000003f98 0000000300000007 R_X86_64_JUMP_SLOT 0000000000000000 puts@GLIBC_2.2.5 + 0
0000000000003fa8 0000000400000007 R_X86_64_JUMP_SLOT 0000000000000000 __stack_chk_fail@GLIBC_2.4 + 0
0000000000003fb0 0000000500000007 R_X86_64_JUMP_SLOT 0000000000000000 fn1 + 0
0000000000003fb8 0000000600000007 R_X86_64_JUMP_SLOT 0000000000000000 fn3 + 0
0000000000003fc0 0000000800000007 R_X86_64_JUMP_SLOT 0000000000000000 fn4 + 0
0000000000003fc8 0000000900000007 R_X86_64_JUMP_SLOT 0000000000000000 fn2 + 0
0000000000003fd0 0000000b00000007 R_X86_64_JUMP_SLOT 0000000000000000 getrandom@GLIBC_2.25 + 0
0000000000003fa0 0000000000000025 R_X86_64_IRELATIVE 125d
$ perf record -e intel_pt//u --filter 'filter main @ ./tstpltifunc' ./tstpltifunc
thing2
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.029 MB perf.data ]
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
20417.302513948: tr strt 0 [unknown] => 5629a74892be main+0x0
20417.302513948: tr end call 5629a74892c6 main+0x8 => 5629a7489110 fn2@plt+0x0
20417.302513949: tr strt 0 [unknown] => 5629a74892cb main+0xd
20417.302513949: tr end call 5629a74892cb main+0xd => 5629a74890f0 fn3@plt+0x0
20417.302513950: tr strt 0 [unknown] => 5629a74892d0 main+0x12
20417.302513950: tr end call 5629a74892d0 main+0x12 => 5629a74890d0 __stack_chk_fail@plt+0x0
20417.302528114: tr strt 0 [unknown] => 5629a74892d5 main+0x17
20417.302528114: tr end call 5629a74892d5 main+0x17 => 5629a7489120 getrandom@plt+0x0
20417.302528115: tr strt 0 [unknown] => 5629a74892da main+0x1c
20417.302528115: tr end call 5629a74892da main+0x1c => 5629a7489100 fn4@plt+0x0
20417.302528115: tr strt 0 [unknown] => 5629a74892df main+0x21
20417.302528115: tr end return 5629a74892e5 main+0x27 => 7ff14da29d90 __libc_start_call_main+0x80
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
20417.302513948: tr strt 0 [unknown] => 5629a74892be main+0x0
20417.302513948: tr end call 5629a74892c6 main+0x8 => 5629a7489110 fn4@plt+0x0
20417.302513949: tr strt 0 [unknown] => 5629a74892cb main+0xd
20417.302513949: tr end call 5629a74892cb main+0xd => 5629a74890f0 fn1@plt+0x0
20417.302513950: tr strt 0 [unknown] => 5629a74892d0 main+0x12
20417.302513950: tr end call 5629a74892d0 main+0x12 => 5629a74890d0 offset_0x10d0@plt+0x0
20417.302528114: tr strt 0 [unknown] => 5629a74892d5 main+0x17
20417.302528114: tr end call 5629a74892d5 main+0x17 => 5629a7489120 fn2@plt+0x0
20417.302528115: tr strt 0 [unknown] => 5629a74892da main+0x1c
20417.302528115: tr end call 5629a74892da main+0x1c => 5629a7489100 fn3@plt+0x0
20417.302528115: tr strt 0 [unknown] => 5629a74892df main+0x21
20417.302528115: tr end return 5629a74892e5 main+0x27 => 7ff14da29d90 __libc_start_call_main+0x80
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Adrian Hunter
|
b2529f829a |
perf symbols: Add support for x86 .plt.sec
The section .plt.sec was originally added for MPX and was first called
.plt.bnd. While MPX has been deprecated, .plt.sec is now also used for
IBT. On x86_64, IBT may be enabled by default, but can be switched off
using gcc option -fcf-protection=none, or switched on by -z ibt or -z
ibtplt. On 32-bit, option -z ibt or -z ibtplt will enable IBT.
With .plt.sec, calls are made into .plt.sec instead of .plt, so it makes
more sense to put the symbols there instead of .plt. A notable
difference is that .plt.sec does not have a header entry.
For x86, when synthesizing symbols for plt, use offset and entry size of
.plt.sec instead of .plt when there is a .plt.sec section.
Example on Ubuntu 22.04 gcc 11.3:
Before:
$ cat tstpltlib.c
void fn1(void) {}
void fn2(void) {}
void fn3(void) {}
void fn4(void) {}
$ cat tstplt.c
void fn1(void);
void fn2(void);
void fn3(void);
void fn4(void);
int main()
{
fn4();
fn1();
fn2();
fn3();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -Wall -Wextra -shared -o libtstpltlib.so tstpltlib.c
$ gcc -Wall -Wextra -z ibt -o tstplt tstplt.c -L . -ltstpltlib -Wl,-rpath=$(pwd)
$ readelf -SW tstplt | grep 'plt\|Name'
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[11] .rela.plt RELA 0000000000000698 000698 000060 18 AI 6 24 8
[13] .plt PROGBITS 0000000000001020 001020 000050 10 AX 0 0 16
[14] .plt.got PROGBITS 0000000000001070 001070 000010 10 AX 0 0 16
[15] .plt.sec PROGBITS 0000000000001080 001080 000040 10 AX 0 0 16
$ perf record -e intel_pt//u --filter 'filter main @ ./tstplt' ./tstplt
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.015 MB perf.data ]
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
38970.522546686: tr strt 0 [unknown] => 55fc222a81a9 main+0x0
38970.522546686: tr end call 55fc222a81b1 main+0x8 => 55fc222a80a0 [unknown]
38970.522546687: tr strt 0 [unknown] => 55fc222a81b6 main+0xd
38970.522546687: tr end call 55fc222a81b6 main+0xd => 55fc222a8080 [unknown]
38970.522546688: tr strt 0 [unknown] => 55fc222a81bb main+0x12
38970.522546688: tr end call 55fc222a81bb main+0x12 => 55fc222a80b0 [unknown]
38970.522546688: tr strt 0 [unknown] => 55fc222a81c0 main+0x17
38970.522546688: tr end call 55fc222a81c0 main+0x17 => 55fc222a8090 [unknown]
38970.522546689: tr strt 0 [unknown] => 55fc222a81c5 main+0x1c
38970.522546894: tr end return 55fc222a81cb main+0x22 => 7f3a4dc29d90 __libc_start_call_main+0x80
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
38970.522546686: tr strt 0 [unknown] => 55fc222a81a9 main+0x0
38970.522546686: tr end call 55fc222a81b1 main+0x8 => 55fc222a80a0 fn4@plt+0x0
38970.522546687: tr strt 0 [unknown] => 55fc222a81b6 main+0xd
38970.522546687: tr end call 55fc222a81b6 main+0xd => 55fc222a8080 fn1@plt+0x0
38970.522546688: tr strt 0 [unknown] => 55fc222a81bb main+0x12
38970.522546688: tr end call 55fc222a81bb main+0x12 => 55fc222a80b0 fn2@plt+0x0
38970.522546688: tr strt 0 [unknown] => 55fc222a81c0 main+0x17
38970.522546688: tr end call 55fc222a81c0 main+0x17 => 55fc222a8090 fn3@plt+0x0
38970.522546689: tr strt 0 [unknown] => 55fc222a81c5 main+0x1c
38970.522546894: tr end return 55fc222a81cb main+0x22 => 7f3a4dc29d90 __libc_start_call_main+0x80
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Adrian Hunter
|
66fe2d53a0 |
perf symbols: Correct plt entry sizes for x86
In 32-bit executables the .plt entry size can be set to 4 when it is really
16. In fact the only sizes used for x86 (32 or 64 bit) are 8 or 16, so
check for those and, if not, use the alignment to choose which it is.
Example on Ubuntu 22.04 gcc 11.3:
Before:
$ cat tstpltlib.c
void fn1(void) {}
void fn2(void) {}
void fn3(void) {}
void fn4(void) {}
$ cat tstplt.c
void fn1(void);
void fn2(void);
void fn3(void);
void fn4(void);
int main()
{
fn4();
fn1();
fn2();
fn3();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -m32 -Wall -Wextra -shared -o libtstpltlib32.so tstpltlib.c
$ gcc -m32 -Wall -Wextra -o tstplt32 tstplt.c -L . -ltstpltlib32 -Wl,-rpath=$(pwd)
$ perf record -e intel_pt//u --filter 'filter main @ ./tstplt32' ./tstplt32
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data ]
$ readelf -SW tstplt32 | grep 'plt\|Name'
[Nr] Name Type Addr Off Size ES Flg Lk Inf Al
[10] .rel.plt REL 0000041c 00041c 000028 08 AI 5 22 4
[12] .plt PROGBITS 00001030 001030 000060 04 AX 0 0 16 <- ES is 0x04, should be 0x10
[13] .plt.got PROGBITS 00001090 001090 000008 08 AX 0 0 8
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
17894.383903029: tr strt 0 [unknown] => 565b81cd main+0x0
17894.383903029: tr end call 565b81d4 main+0x7 => 565b80d0 __x86.get_pc_thunk.bx+0x0
17894.383903031: tr strt 0 [unknown] => 565b81d9 main+0xc
17894.383903031: tr end call 565b81df main+0x12 => 565b8070 [unknown]
17894.383903032: tr strt 0 [unknown] => 565b81e4 main+0x17
17894.383903032: tr end call 565b81e4 main+0x17 => 565b8050 [unknown]
17894.383903033: tr strt 0 [unknown] => 565b81e9 main+0x1c
17894.383903033: tr end call 565b81e9 main+0x1c => 565b8080 [unknown]
17894.383903033: tr strt 0 [unknown] => 565b81ee main+0x21
17894.383903033: tr end call 565b81ee main+0x21 => 565b8060 [unknown]
17894.383903237: tr strt 0 [unknown] => 565b81f3 main+0x26
17894.383903237: tr end return 565b81fc main+0x2f => f7c21519 [unknown]
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
17894.383903029: tr strt 0 [unknown] => 565b81cd main+0x0
17894.383903029: tr end call 565b81d4 main+0x7 => 565b80d0 __x86.get_pc_thunk.bx+0x0
17894.383903031: tr strt 0 [unknown] => 565b81d9 main+0xc
17894.383903031: tr end call 565b81df main+0x12 => 565b8070 fn4@plt+0x0
17894.383903032: tr strt 0 [unknown] => 565b81e4 main+0x17
17894.383903032: tr end call 565b81e4 main+0x17 => 565b8050 fn1@plt+0x0
17894.383903033: tr strt 0 [unknown] => 565b81e9 main+0x1c
17894.383903033: tr end call 565b81e9 main+0x1c => 565b8080 fn2@plt+0x0
17894.383903033: tr strt 0 [unknown] => 565b81ee main+0x21
17894.383903033: tr end call 565b81ee main+0x21 => 565b8060 fn3@plt+0x0
17894.383903237: tr strt 0 [unknown] => 565b81f3 main+0x26
17894.383903237: tr end return 565b81fc main+0x2f => f7c21519 [unknown]
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Namhyung Kim
|
14bf478441 |
perf session: Avoid calling lseek(2) for pipe
We should not call lseek(2) for pipes as it won't work. And we already in the proper place to read the data for AUXTRACE. Add the comment like in the PERF_RECORD_HEADER_TRACING_DATA. Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20230131023350.1903992-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
aeb802f872 |
perf intel-pt: Do not try to queue auxtrace data on pipe
When it processes AUXTRACE_INFO, it calls to auxtrace_queue_data() to
collect AUXTRACE data first. That won't work with pipe since it needs
lseek() to read the scattered aux data.
$ perf record -o- -e intel_pt// true | perf report -i- --itrace=i100
# To display the perf.data header info, please use --header/--header-only options.
#
0x4118 [0xa0]: failed to process type: 70
Error:
failed to process sample
For the pipe mode, it can handle the aux data as it gets. But there's
no guarantee it can get the aux data in time. So the following warning
will be shown at the beginning:
WARNING: Intel PT with pipe mode is not recommended.
The output cannot relied upon. In particular,
time stamps and the order of events may be incorrect.
Fixes:
|
||
|
Mike Leach
|
c6535b6ba9 |
perf cs-etm: Update decoder code for OpenCSD version 1.4
OpenCSD version 1.4 is released with support for FEAT_ITE. This adds a new packet type, with associated output element ID in the packet type enum - OCSD_GEN_TRC_ELEM_INSTRUMENTATION. As we just ignore this packet in perf, add to the switch statement to avoid the "enum not handled in switch error", but conditionally so as not to break the perf build for older OpenCSD installations. Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Mike Leach <mike.leach@linaro.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20230120153706.20388-1-mike.leach@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
22e06e6825 |
perf buildid: Avoid copy of uninitialized memory
build_id__init() only copies the buildid data up to size leaving the rest of the data array uninitialized. Copying the full array during synthesis means the written event contains uninitialized memory. Ensure the size is less that the buffer size and only copy the bytes that were initialized. This was detected by the Clang/LLVM memory sanitizer. v2. Avoids the potential for copying too much as suggested by Arnaldo. Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Rix <trix@redhat.com> Cc: llvm@lists.linux.dev Link: https://lore.kernel.org/r/20230120185828.43231-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Diederik de Haas
|
fc5d836c67 |
perf: Various spelling fixes
Fix various spelling errors as reported by Debian's lintian tool. "amount of times" -> "number of times" ocurrence -> occurrence upto -> up to Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230122122034.48020-1-didi.debian@cknow.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
91f67b9a64 |
Merge remote-tracking branch 'torvalds/master' into perf/core
To pick fixes that went via perf/urgent. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
James Clark
|
5670ebf54b |
perf cs-etm: Ensure that Coresight timestamps don't go backwards
There are some edge cases around estimated timestamps that can result
in them going backwards.
One is that after a discontinuity, the last used timestamp is set to 0.
The duration of the next range is then subtracted which could result in
an earlier timestamp than the last instruction. Fix this by not
resetting the last timestamp used on a discontinuity, and make sure that
new estimated timestamps are clamped to be later than that.
Another case is that estimated timestamps could compound over time to
end up being more than the next real timestamp in the trace. Fix this by
clamping the estimates in cs_etm_decoder__do_soft_timestamp() to be no
later than it.
cs_etm_decoder__do_soft_timestamp() also updated next_cs_timestamp,
which meant that the next real timestamp was lost and not stored
anywhere. Fix that by only updating cs_timestamp for estimates and keep
next_cs_timestamp untouched.
Finally, use next_cs_timestamp to signify if a timestamp has been
received previously. Because cs_timestamp has the first range
subtracted, it could technically go to 0 which would break the logic.
Testing
=======
It can be verified that timestamps don't go backwards when tracing on a
single core with the following commands. Across multiple cores it's
expected that timestamps are interleaved:
$ perf record -e cs_etm/@tmc_etr0/k -C 4 taskset -c 4 sleep 1
$ perf script --itrace=i1ns --ns -Fcomm,tid,pid,time,cpu,event,ip,sym,addr,symoff,flags,callindent > itrace
$ sed 's/://g' itrace | awk -F ' ' ' { print $4 } ' | awk '{ if ($1 < prev) { print "line:" NR " " $0 } {prev=$1}}'
Reported-by: Tanmay Jagdale <tanmay@marvell.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Tested-by: Tanmay Jagdale <tanmay@marvell.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: George Cherian <gcherian@marvell.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Linu Cherian <lcherian@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230120143702.4035046-9-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
German Gomez
|
a7fe9a443b |
perf cs_etm: Set the time field in the synthetic samples
If virtual timestamps are detected, set sample time field accordingly, otherwise warn the user that the samples will not include accurate time data. | Test notes (FEAT_TRF platform) | | $ ./perf record -e cs_etm//u -a -- sleep 4 | $ ./perf script --fields +time | perf 422 [000] 163.375100: 1 branches:uH: 0 [unknown] ([unknown]) | perf 422 [000] 163.375100: 1 branches:uH: ffffb8009544 ioctl+0x14 (/lib/aarch64-linux-gnu/libc-2.27.so) | perf 422 [000] 163.375100: 1 branches:uH: aaaaab6bebf4 perf_evsel__run_ioctl+0x90 (/home/german/linux/tools/perf/perf) | [...] | perf 422 [000] 167.393100: 1 branches:uH: aaaaab6bda00 __xyarray__entry+0x74 (/home/german/linux/tools/perf/perf) | perf 422 [000] 167.393099: 1 branches:uH: aaaaab6bda0c __xyarray__entry+0x80 (/home/german/linux/tools/perf/perf) | perf 422 [000] 167.393099: 1 branches:uH: ffffb8009538 ioctl+0x8 (/lib/aarch64-linux-gnu/libc-2.27.so) | | The time from the first sample to the last sample is 4 seconds Now that times are converted to nanoseconds, also try to estimate the timestamps more accurately be dividing by some fixed value for instructions per ns. This prevents long ranges from being estimated too far in the past than would be realistic. Signed-off-by: German Gomez <german.gomez@arm.com> Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com> Tested-by: Tanmay Jagdale <tanmay@marvell.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Bharat Bhushan <bbhushan2@marvell.com> Cc: George Cherian <gcherian@marvell.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Linu Cherian <lcherian@marvell.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20230120143702.4035046-8-james.clark@arm.com Signed-off-by: James Clark <james.clark@arm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
German Gomez
|
2e2f7ceecc |
perf cs_etm: Record ts_source in AUXTRACE_INFO for ETMv4 and ETE
Read the value of ts_source exposed by the driver and store it in the ETMv4 and ETE header. If the interface doesn't exist (such as in older Kernels), defaults to a safe value of -1. Signed-off-by: German Gomez <german.gomez@arm.com> Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com> Tested-by: Tanmay Jagdale <tanmay@marvell.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Bharat Bhushan <bbhushan2@marvell.com> Cc: George Cherian <gcherian@marvell.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Linu Cherian <lcherian@marvell.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20230120143702.4035046-7-james.clark@arm.com Signed-off-by: James Clark <james.clark@arm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
German Gomez
|
326163c552 |
perf cs_etm: Keep separate symbols for ETMv4 and ETE parameters
Previously, adding a new parameter at the end of ETMv4 meant adding it somewhere in the middle of ETE, which is not supported by the current header version. Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: German Gomez <german.gomez@arm.com> Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com> Tested-by: Tanmay Jagdale <tanmay@marvell.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Bharat Bhushan <bbhushan2@marvell.com> Cc: George Cherian <gcherian@marvell.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Linu Cherian <lcherian@marvell.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20230120143702.4035046-6-james.clark@arm.com Signed-off-by: James Clark <james.clark@arm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
German Gomez
|
c2b6a8969c |
perf pmu: Add function to check if a pmu file exists
Add a utility function perf_pmu__file_exists() to check if a given pmu file exists in the sysfs filesystem. Signed-off-by: German Gomez <german.gomez@arm.com> Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com> Tested-by: Tanmay Jagdale <tanmay@marvell.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Bharat Bhushan <bbhushan2@marvell.com> Cc: George Cherian <gcherian@marvell.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Linu Cherian <lcherian@marvell.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20230120143702.4035046-5-james.clark@arm.com Signed-off-by: James Clark <james.clark@arm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
James Clark
|
5f2c8efa78 |
perf pmu: Remove remaining duplication of bus/event_source/devices/...
Use the new perf_pmu__pathname_scnprintf() instead. No functional changes. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com> Tested-by: Tanmay Jagdale <tanmay@marvell.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Bharat Bhushan <bbhushan2@marvell.com> Cc: George Cherian <gcherian@marvell.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Linu Cherian <lcherian@marvell.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20230120143702.4035046-4-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
James Clark
|
d50a79cd0f |
perf pmu: Use perf_pmu__open_file() and perf_pmu__scan_file()
Remove some code that duplicates existing methods. Copy strings where const strings are required. No functional changes. Committer notes: Add a stub for erf_pmu__scan_file() in tools/perf/util/python.c not to drag tools/perf/util/pmu.c into the python binding. This fixes 'perf test python' at this point in this patchset. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com> Tested-by: Tanmay Jagdale <tanmay@marvell.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Bharat Bhushan <bbhushan2@marvell.com> Cc: George Cherian <gcherian@marvell.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Linu Cherian <lcherian@marvell.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20230120143702.4035046-3-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
James Clark
|
f8ad6018ce |
perf pmu: Remove duplication around EVENT_SOURCE_DEVICE_PATH
The pattern for accessing EVENT_SOURCE_DEVICE_PATH is duplicated in a few places, so add two utility functions to cover it. Also just use perf_pmu__scan_file() instead of pmu_type() which already does the same thing. No functional changes. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com> Tested-by: Tanmay Jagdale <tanmay@marvell.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Bharat Bhushan <bbhushan2@marvell.com> Cc: George Cherian <gcherian@marvell.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Linu Cherian <lcherian@marvell.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sunil Kovvuri Goutham <sgoutham@marvell.com> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20230120143702.4035046-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Adrian Hunter
|
df8aeaefea |
perf symbols: Check SHT_RELA and SHT_REL type earlier
Make the code more readable by checking for SHT_RELA and SHT_REL type earlier. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20230120123456.12449-11-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |