Commit graph

2478 commits

Author SHA1 Message Date
NeilBrown
e0ee778528 md/raid10: fix problem with on-stack allocation of r10bio structure.
A 'struct r10bio' has an array of per-copy information at the end.
This array is declared with size [0] and r10bio_pool_alloc allocates
enough extra space to store the per-copy information depending on the
number of copies needed.

So declaring a 'struct r10bio on the stack isn't going to work.  It
won't allocate enough space, and memory corruption will ensue.

So in the two places where this is done, declare a sufficiently large
structure and use that instead.

The two call-sites of this bug were introduced in 3.4 and 3.5
so this is suitable for both those kernels.  The patch will have to
be modified for 3.4 as it only has one bug.

Cc: stable@vger.kernel.org
Reported-by: Ivan Vasilyev <ivan.vasilyev@gmail.com>
Tested-by: Ivan Vasilyev <ivan.vasilyev@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-18 09:51:42 +10:00
NeilBrown
667a5313ec md: Don't truncate size at 4TB for RAID0 and Linear
commit 27a7b260f7
   md: Fix handling for devices from 2TB to 4TB in 0.90 metadata.

changed 0.90 metadata handling to truncated size to 4TB as that is
all that 0.90 can record.
However for RAID0 and Linear, 0.90 doesn't need to record the size, so
this truncation is not needed and causes working arrays to become too small.

So avoid the truncation for RAID0 and Linear

This bug was introduced in 3.1 and is suitable for any stable kernels
from then onwards.
As the offending commit was tagged for 'stable', any stable kernel
that it was applied to should also get this patch.  That includes
at least 2.6.32, 2.6.33 and 3.0. (Thanks to Ben Hutchings for
providing that list).

Cc: stable@vger.kernel.org
Signed-off-by: Neil Brown <neilb@suse.de>
2012-08-16 16:46:12 +10:00
Linus Torvalds
25aa6a7ae4 Additional md update for 3.6
This contains a few patches that depend on
 plugging changes in the block layer so needs to wait
 for those.
 It also contains a Kconfig fix for the new RAID10 support
 in dm-raid.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIVAwUAUBnKUznsnt1WYoG5AQJOQA/+M7RoVnF63+TbGIqdNDotuF8FxvudCZBl
 Ou2yG47EOPtWf/RoqPyfpydDgdjyXsk4T5TfXoc0hsXVr4shCYo51uT9K34TMSDJ
 2GzGWuyugRJFyvxW7PBgM+zFWlcVdgUGcwsdmIUMtHRz8Q10TqO5fE22RNLkhwOl
 fvGCK1KYnQqlG87DbulHWMo22vyZVic8jBqFSw55CPuuFMSJMxCw0rOPUnvk5Q8v
 jWzZzuUqrM8iiOxTDHsbCA0IleCbGl/m0tgk02Vj4tkCvz9N/xzQW2se0H6uECiK
 k8odbAiNBOh1q135sa7ASrBzxT+JqSiQ25rLheTEzzNxjFv6/NlntXmYu6HB+lD3
 DoHAvRjgMxiLCdisW6TJb10NItitXwE/HSpQOVRxyYtINdzmhIDaCccgfN8ZMkho
 nmE/uzO+CAoCFpZC2C/nY8D0BZs5fw4hgDAsci66mvs+88dy+SoA4AbyNEMAusOS
 tiL8ZEjnYXvxTh3JFaMIaqQd6PkbahmtEtvorwXsUYUdY0ybkcs2FYVksvkgYdyW
 WlejOZVurY2i5biqck3UqjesxeJA5TMAlAUQR7vXu1Fa9fYFXZbqJom/KnPRTfek
 xerCWPMbhuzmcyEjUOGfjs6GFEnEmRT6Q6fN3CBaQMS2Q/z+6AkTOXKVl5Fhvoyl
 aeu1m8nZLuI=
 =ovN2
 -----END PGP SIGNATURE-----

Merge tag 'md-3.6' of git://neil.brown.name/md

Pull additional md update from NeilBrown:
 "This contains a few patches that depend on plugging changes in the
  block layer so needed to wait for those.

  It also contains a Kconfig fix for the new RAID10 support in dm-raid."

* tag 'md-3.6' of git://neil.brown.name/md:
  md/dm-raid: DM_RAID should select MD_RAID10
  md/raid1: submit IO from originating thread instead of md thread.
  raid5: raid5d handle stripe in batch way
  raid5: make_request use batch stripe release
2012-08-02 11:34:40 -07:00
NeilBrown
d9f691c365 md/dm-raid: DM_RAID should select MD_RAID10
Now that DM_RAID supports raid10, it needs to select that code
to ensure it is included.

Cc: Jonathan Brassow <jbrassow@redhat.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-02 08:35:43 +10:00
NeilBrown
f54a9d0e59 md/raid1: submit IO from originating thread instead of md thread.
queuing writes to the md thread means that all requests go through the
one processor which may not be able to keep up with very high request
rates.

So use the plugging infrastructure to submit all requests on unplug.
If a 'schedule' is needed, we fall back on the old approach of handing
the requests to the thread for it to handle.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-02 08:33:20 +10:00
Shaohua Li
46a06401f6 raid5: raid5d handle stripe in batch way
Let raid5d handle stripe in batch way to reduce conf->device_lock locking.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-02 08:33:15 +10:00
Shaohua Li
8811b5968f raid5: make_request use batch stripe release
make_request() does stripe release for every stripe and the stripe usually has
count 1, which makes previous release_stripe() optimization not work. In my
test, this release_stripe() becomes the heaviest pleace to take
conf->device_lock after previous patches applied.

Below patch makes stripe release batch. All the stripes will be released in
unplug. The STRIPE_ON_UNPLUG_LIST bit is to protect concurrent access stripe
lru.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-02 08:33:00 +10:00
Linus Torvalds
eff0d13f38 Merge branch 'for-3.6/drivers' of git://git.kernel.dk/linux-block
Pull block driver changes from Jens Axboe:

 - Making the plugging support for drivers a bit more sane from Neil.
   This supersedes the plugging change from Shaohua as well.

 - The usual round of drbd updates.

 - Using a tail add instead of a head add in the request completion for
   ndb, making us find the most completed request more quickly.

 - A few floppy changes, getting rid of a duplicated flag and also
   running the floppy init async (since it takes forever in boot terms)
   from Andi.

* 'for-3.6/drivers' of git://git.kernel.dk/linux-block:
  floppy: remove duplicated flag FD_RAW_NEED_DISK
  blk: pass from_schedule to non-request unplug functions.
  block: stack unplug
  blk: centralize non-request unplug handling.
  md: remove plug_cnt feature of plugging.
  block/nbd: micro-optimization in nbd request completion
  drbd: announce FLUSH/FUA capability to upper layers
  drbd: fix max_bio_size to be unsigned
  drbd: flush drbd work queue before invalidate/invalidate remote
  drbd: fix potential access after free
  drbd: call local-io-error handler early
  drbd: do not reset rs_pending_cnt too early
  drbd: reset congestion information before reporting it in /proc/drbd
  drbd: report congestion if we are waiting for some userland callback
  drbd: differentiate between normal and forced detach
  drbd: cleanup, remove two unused global flags
  floppy: Run floppy initialization asynchronous
2012-08-01 09:06:47 -07:00
Linus Torvalds
fcff06c438 Merge branch 'for-next' of git://neil.brown.name/md
Pull md updates from NeilBrown.

* 'for-next' of git://neil.brown.name/md:
  DM RAID: Add support for MD RAID10
  md/RAID1: Add missing case for attempting to repair known bad blocks.
  md/raid5: For odirect-write performance, do not set STRIPE_PREREAD_ACTIVE.
  md/raid1: don't abort a resync on the first badblock.
  md: remove duplicated test on ->openers when calling do_md_stop()
  raid5: Add R5_ReadNoMerge flag which prevent bio from merging at block layer
  md/raid1: prevent merging too large request
  md/raid1: read balance chooses idlest disk for SSD
  md/raid1: make sequential read detection per disk based
  MD RAID10: Export md_raid10_congested
  MD: Move macros from raid1*.h to raid1*.c
  MD RAID1: rename mirror_info structure
  MD RAID10: rename mirror_info structure
  MD RAID10: Fix compiler warning.
  raid5: add a per-stripe lock
  raid5: remove unnecessary bitmap write optimization
  raid5: lockless access raid5 overrided bi_phys_segments
  raid5: reduce chance release_stripe() taking device_lock
2012-08-01 09:02:01 -07:00
Jonathan Brassow
63f33b8dda DM RAID: Add support for MD RAID10
Support the MD RAID10 personality through dm-raid.c

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-01 20:41:20 +10:00
NeilBrown
bb181e2e48 Merge commit 'c039c332f23e794deb6d6f37b9f07ff3b27fb2cf' into md
Pull in pre-requisites for adding raid10 support to dm-raid.
2012-08-01 20:40:02 +10:00
NeilBrown
74018dc306 blk: pass from_schedule to non-request unplug functions.
This will allow md/raid to know why the unplug was called,
and will be able to act according - if !from_schedule it
is safe to perform tasks which could themselves schedule.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-07-31 09:08:15 +02:00
NeilBrown
9cbb175088 blk: centralize non-request unplug handling.
Both md and umem has similar code for getting notified on an
blk_finish_plug event.
Centralize this code in block/ and allow each driver to
provide its distinctive difference.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-07-31 09:08:14 +02:00
NeilBrown
0021b7bc04 md: remove plug_cnt feature of plugging.
This seemed like a good idea at the time, but after further thought I
cannot see it making a difference other than very occasionally and
testing to try to exercise the case it is most likely to help did not
show any performance difference by removing it.

So remove the counting of active plugs and allow 'pending writes' to
be activated at any time, not just when no plugs are active.

This is only relevant when there is a write-intent bitmap, and the
updating of the bitmap will likely introduce enough delay that
the single-threading of bitmap updates will be enough to collect large
numbers of updates together.

Removing this will make it easier to centralise the unplug code, and
will clear the other for other unplug enhancements which have a
measurable effect.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-07-31 09:08:14 +02:00
Alexander Lyakas
d57368afe6 md/RAID1: Add missing case for attempting to repair known bad blocks.
When doing resync or repair, attempt to correct bad blocks, according
to WriteErrorSeen policy

Signed-off-by: Alex Lyakas <alex.bolshoy@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 12:01:29 +10:00
Linus Torvalds
27c1ee3f92 Merge branch 'akpm' (Andrew's patch-bomb)
Merge Andrew's first set of patches:
 "Non-MM patches:

   - lots of misc bits

   - tree-wide have_clk() cleanups

   - quite a lot of printk tweaks.  I draw your attention to "printk:
     convert the format for KERN_<LEVEL> to a 2 byte pattern" which
     looks a bit scary.  But afaict it's solid.

   - backlight updates

   - lib/ feature work (notably the addition and use of memweight())

   - checkpatch updates

   - rtc updates

   - nilfs updates

   - fatfs updates (partial, still waiting for acks)

   - kdump, proc, fork, IPC, sysctl, taskstats, pps, etc

   - new fault-injection feature work"

* Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
  drivers/misc/lkdtm.c: fix missing allocation failure check
  lib/scatterlist: do not re-write gfp_flags in __sg_alloc_table()
  fault-injection: add tool to run command with failslab or fail_page_alloc
  fault-injection: add selftests for cpu and memory hotplug
  powerpc: pSeries reconfig notifier error injection module
  memory: memory notifier error injection module
  PM: PM notifier error injection module
  cpu: rewrite cpu-notifier-error-inject module
  fault-injection: notifier error injection
  c/r: fcntl: add F_GETOWNER_UIDS option
  resource: make sure requested range is included in the root range
  include/linux/aio.h: cpp->C conversions
  fs: cachefiles: add support for large files in filesystem caching
  pps: return PTR_ERR on error in device_create
  taskstats: check nla_reserve() return
  sysctl: suppress kmemleak messages
  ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION
  ipc: compat: use signed size_t types for msgsnd and msgrcv
  ipc: allow compat IPC version field parsing if !ARCH_WANT_OLD_COMPAT_IPC
  ipc: add COMPAT_SHMLBA support
  ...
2012-07-30 17:25:34 -07:00
Akinobu Mita
8fb980e35b dm: use memweight()
Use memweight() to count the total number of bits set in memory area.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Alasdair Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:16 -07:00
majianpeng
895e3c5c58 md/raid5: For odirect-write performance, do not set STRIPE_PREREAD_ACTIVE.
'sync' writes set both REQ_SYNC and REQ_NOIDLE.
O_DIRECT writes set REQ_SYNC but not REQ_NOIDLE.

We currently assume that a REQ_SYNC request will not be followed by
more requests and so set STRIPE_PREREAD_ACTIVE to expedite the
request.
This is appropriate for sync requests, but not for O_DIRECT requests.

So make the setting of STRIPE_PREREAD_ACTIVE conditional on REQ_NOIDLE
rather than REQ_SYNC.  This is consistent with the documented meaning
of REQ_NOIDLE:

        __REQ_NOIDLE,           /* don't anticipate more IO after this one */

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:05:44 +10:00
NeilBrown
b7219ccb33 md/raid1: don't abort a resync on the first badblock.
If a resync of a RAID1 array with 2 devices finds a known bad block
one device it will neither read from, or write to, that device for
this block offset.
So there will be one read_target (The other device) and zero write
targets.
This condition causes md/raid1 to abort the resync assuming that it
has finished - without known bad blocks this would be true.

When there are no write targets because of the presence of bad blocks
we should only skip over the area covered by the bad block.
RAID10 already gets this right, raid1 doesn't.  Or didn't.

As this can cause a 'sync' to abort early and appear to have succeeded
it could lead to some data corruption, so it suitable for -stable.

Cc: stable@vger.kernel.org
Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:05:34 +10:00
NeilBrown
90cf195d9b md: remove duplicated test on ->openers when calling do_md_stop()
do_md_stop tests mddev->openers while holding ->open_mutex,
and fails if this count is too high.
So callers do not need to check mddev->openers and doing so isn't
very meaningful as they don't hold ->open_mutex so the number could
change.

So remove the unnecessary tests on mddev->openers.
These are not called often enough for there to be any gain in
an early test on ->open_mutex to avoid the need for a slightly more
costly mutex_lock call.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:04:55 +10:00
majianpeng
3f9e7c140e raid5: Add R5_ReadNoMerge flag which prevent bio from merging at block layer
Because bios will merge at block-layer,so bios-error may caused by other
bio which be merged into to the same request.
Using this flag,it will find exactly error-sector and not do redundant
operation like re-write and re-read.

V0->V1:Using REQ_FLUSH instead REQ_NOMERGE avoid bio merging at block
layer.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:04:21 +10:00
Shaohua Li
12cee5a8a2 md/raid1: prevent merging too large request
For SSD, if request size exceeds specific value (optimal io size), request size
isn't important for bandwidth. In such condition, if making request size bigger
will cause some disks idle, the total throughput will actually drop. A good
example is doing a readahead in a two-disk raid1 setup.

So when should we split big requests? We absolutly don't want to split big
request to very small requests. Even in SSD, big request transfer is more
efficient. This patch only considers request with size above optimal io size.

If all disks are busy, is it worth doing a split? Say optimal io size is 16k,
two requests 32k and two disks. We can let each disk run one 32k request, or
split the requests to 4 16k requests and each disk runs two. It's hard to say
which case is better, depending on hardware.

So only consider case where there are idle disks. For readahead, split is
always better in this case. And in my test, below patch can improve > 30%
thoughput. Hmm, not 100%, because disk isn't 100% busy.

Such case can happen not just in readahead, for example, in directio. But I
suppose directio usually will have bigger IO depth and make all disks busy, so
I ignored it.

Note: if the raid uses any hard disk, we don't prevent merging. That will make
performace worse.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:53 +10:00
Shaohua Li
9dedf60313 md/raid1: read balance chooses idlest disk for SSD
SSD hasn't spindle, distance between requests means nothing. And the original
distance based algorithm sometimes can cause severe performance issue for SSD
raid.

Considering two thread groups, one accesses file A, the other access file B.
The first group will access one disk and the second will access the other disk,
because requests are near from one group and far between groups. In this case,
read balance might keep one disk very busy but the other relative idle.  For
SSD, we should try best to distribute requests to as many disks as possible.
There isn't spindle move penality anyway.

With below patch, I can see more than 50% throughput improvement sometimes
depending on workloads.

The only exception is small requests can be merged to a big request which
typically can drive higher throughput for SSD too. Such small requests are
sequential reads. Unlike hard disk, sequential read which can't be merged (for
example direct IO, or read without readahead) can be ignored for SSD. Again
there is no spindle move penality. readahead dispatches small requests and such
requests can be merged.

Last patch can help detect sequential read well, at least if concurrent read
number isn't greater than raid disk number. In that case, distance based
algorithm doesn't work well too.

V2: For hard disk and SSD mixed raid, doesn't use distance based algorithm for
random IO too. This makes the algorithm generic for raid with SSD.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:53 +10:00
Shaohua Li
be4d3280b1 md/raid1: make sequential read detection per disk based
Currently the sequential read detection is global wide. It's natural to make it
per disk based, which can improve the detection for concurrent multiple
sequential reads. And next patch will make SSD read balance not use distance
based algorithm, where this change help detect truly sequential read for SSD.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:53 +10:00
Jonathan Brassow
cc4d1efdd0 MD RAID10: Export md_raid10_congested
md/raid10: Export is_congested test.

In similar fashion to commits
	11d8a6e371
	1ed7242e59
we export the RAID10 congestion checking function so that dm-raid.c can
make use of it and make use of the personality.  The 'queue' and 'gendisk'
structures will not be available to the MD code when device-mapper sets
up the device, so we conditionalize access to these fields also.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:53 +10:00
Jonathan Brassow
473e87ce48 MD: Move macros from raid1*.h to raid1*.c
MD RAID1/RAID10: Move some macros from .h file to .c file

There are three macros (IO_BLOCKED,IO_MADE_GOOD,BIO_SPECIAL) which are defined
in both raid1.h and raid10.h.  They are only used in there respective .c files.
However, if we wish to make RAID10 accessible to the device-mapper RAID
target (dm-raid.c), then we need to move these macros into the .c files where
they are used so that they do not conflict with each other.

The macros from the two files are identical and could be moved into md.h, but
I chose to leave the duplication and have them remain in the personality
files.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:52 +10:00
Jonathan Brassow
0eaf822cb3 MD RAID1: rename mirror_info structure
MD RAID1: Rename the structure 'mirror_info' to 'raid1_info'

The same structure name ('mirror_info') is used by raid10.  Each of these
structures are defined in there respective header files.  If dm-raid is
to support both RAID1 and RAID10, the header files will be included and
the structure names must not collide.  While only one of these structure
names needs to change, this patch adds consistency to the naming of the
structure.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:52 +10:00
Jonathan Brassow
dc280d987f MD RAID10: rename mirror_info structure
MD RAID10: Rename the structure 'mirror_info' to 'raid10_info'

The same structure name ('mirror_info') is used by raid1.  Each of these
structures are defined in there respective header files.  If dm-raid is
to support both RAID1 and RAID10, the header files will be included and
the structure names must not collide.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:52 +10:00
Jonathan Brassow
3bbae04b12 MD RAID10: Fix compiler warning.
MD RAID10:  Fix compiler warning.

Initialize variable to prevent compiler warning.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:52 +10:00
Alasdair G Kergon
1f4e0ff079 dm thin: commit before gathering status
Commit outstanding metadata before returning the status for a dm thin
pool so that the numbers reported are as up-to-date as possible.

The commit is not performed if the device is suspended or if
the DM_NOFLUSH_FLAG is supplied by userspace and passed to the target
through a new 'status_flags' parameter in the target's dm_status_fn.

The userspace dmsetup tool will support the --noflush flag with the
'dmsetup status' and 'dmsetup wait' commands from version 1.02.76
onwards.

Tested-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:16 +01:00
Joe Thornber
e49e582965 dm thin: add read only and fail io modes
Add read-only and fail-io modes to thin provisioning.

If a transaction commit fails the pool's metadata device will transition
to "read-only" mode.  If a commit fails once already in read-only mode
the transition to "fail-io" mode occurs.

Once in fail-io mode the pool and all associated thin devices will
report a status of "Fail".

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:16 +01:00
Joe Thornber
da105ed5fd dm thin metadata: introduce dm_pool_abort_metadata
Introduce dm_pool_abort_metadata to abort the current metadata
transaction.  Generally this will only be called when bad things are
happening and dm-thin is trying to roll back to a good state for
read-only mode.

It's complicated by the fact that the metadata device may have failed
completely causing the abort to be unable to read the old transaction.
In this case the metadata object is placed in a 'fail' mode and
everything fails apart from destroying it.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:15 +01:00
Joe Thornber
12ba58af46 dm thin metadata: introduce dm_pool_metadata_set_read_only
Introduce dm_pool_metadata_set_read_only to put the underlying block
manager into read-only mode.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:15 +01:00
Joe Thornber
310975573b dm persistent data: introduce dm_bm_set_read_only
Introduce dm_bm_set_read_only to switch the block manager into a
read-only mode.  To be used when dm-thin degrades due to io errors on
the metadata device.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:15 +01:00
Joe Thornber
4afdd680f7 dm thin: reduce number of metadata commits
Reduce the number of metadata commits by using
dm_thin_changed_this_transaction to check if metadata was changed on a
per thin device granularity.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:14 +01:00
Joe Thornber
40db5a5376 dm thin metadata: add dm_thin_changed_this_transaction
Introduce dm_thin_changed_this_transaction to dm-thin-metadata to publish a
useful bit of information we're already tracking.  This will help dm thin
decide when to commit.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:14 +01:00
Joe Thornber
66b1edc05e dm thin metadata: add format option to dm_pool_metadata_open
Add a parameter to dm_pool_metadata_open to indicate whether or not an
unformatted metadata area should be formatted.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:14 +01:00
Joe Thornber
0fa5b17b08 dm thin metadata: tidy up open and format error paths
Tidy up error path in __open_metadata and __format_metadata in dm-thin-metadata.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:14 +01:00
Mike Snitzer
d73ec52538 dm thin metadata: only check incompat features on open
Factor out __check_incompat_features and only call it once when we open
the metadata device rather than at the beginning of every transaction.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:13 +01:00
Joe Thornber
b793995108 dm thin metadata: remove duplicate pmd initialisation
Remove some duplicate initialisation of struct dm_pool_metadata.

These pmd fields are initialised by both:
  __format_metadata's calls to dm_btree_empty
  __write_initial_superblock + __begin_transaction

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:13 +01:00
Joe Thornber
8801e06945 dm thin metadata: remove create parameter from __create_persistent_data_objects
Remove 'create' parameter from __create_persistent_data_objects() in dm-thin-metadata.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:13 +01:00
Joe Thornber
237074c0a3 dm thin metadata: move __superblock_all_zeroes to __open_or_format_metadata
Move the check for __superblock_all_zeroes from
__create_persistent_data_objects() down to __open_or_format_metadata in
dm-thin-metadata.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:13 +01:00
Joe Thornber
a97e5e6fd0 dm thin metadata: remove nr_blocks arg from __create_persistent_data_objects
Remove nr_blocks arg from __create_persistent_data_objects in dm-thin-metadata.
It was always passed as zero.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:12 +01:00
Joe Thornber
e4d2205cdf dm thin metadata: split __open or format metadata
Split __open_or_format_metadata into __format_metadata and __open_metadata in
dm-thin-metadata.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:12 +01:00
Joe Thornber
d6332814e3 dm thin metadata: use struct dm_pool_metadata members in __open_or_format_metadata
Clean up __open_or_format_metadata in dm-thin-metadata by using struct
dm_pool_metadata members to replace local variables.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:12 +01:00
Joe Thornber
583ceee2ed dm thin metadata: zero unused superblock uuid
Zero the unused uuid when initialising the metadata superblock.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:11 +01:00
Joe Thornber
270938bac5 dm thin metadata: lift __begin_transaction out of __write_initial_superblock
Lift the call to __begin_transaction out of __write_initial_superblock in
dm-thin-metadata.  Called higher up the call chain now.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:11 +01:00
Joe Thornber
10d2a9ff7c dm thin metadata: move dm_commit_pool_metadata into __write_initial_superblock
Move dm_commit_pool_metadata inline into __write_initial_superblock in dm-thin-metadata.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:11 +01:00
Joe Thornber
9cb6653f9a dm thin metadata: factor out __write_initial_superblock
Factor out __write_initial_superblock and also pull some other initial
creation code out of dm_pool_metadata_open.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:10 +01:00
Joe Thornber
6a0ebd31b6 dm thin metadata: lift some initialisation out of __open_or_format_metadata
Lift some initialisation out of __open_or_format_metadata in dm-thin-metadata.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:10 +01:00