Commit graph

2173 commits

Author SHA1 Message Date
David S. Miller
3505d1a9fd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/sfc/sfe4001.c
	drivers/net/wireless/libertas/cmd.c
	drivers/staging/Kconfig
	drivers/staging/Makefile
	drivers/staging/rtl8187se/Kconfig
	drivers/staging/rtl8192e/Kconfig
2009-11-18 22:19:03 -08:00
Alexey Dobriyan
d43c36dc6b headers: remove sched.h from interrupt.h
After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-10-11 11:20:58 -07:00
Linus Torvalds
69585dd69e Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (34 commits)
  [SCSI] qla2xxx: Fix NULL ptr deref bug in fail path during queue create
  [SCSI] st: fix possible memory use after free after MTSETBLK ioctl
  [SCSI] be2iscsi: Moving to pci_pools v3
  [SCSI] libiscsi: iscsi_session_setup to allow for private space
  [SCSI] be2iscsi: add 10Gbps iSCSI - BladeEngine 2 driver
  [SCSI] zfcp: Fix hang when offlining device with offline chpid
  [SCSI] zfcp: Fix lockdep warning when offlining device with offline chpid
  [SCSI] zfcp: Fix oops during shutdown of offline device
  [SCSI] zfcp: Fix initial device and cfdc for delayed adapter allocation
  [SCSI] zfcp: correctly initialize unchained requests
  [SCSI] mpt2sas: Bump version 02.100.03.00
  [SCSI] mpt2sas: Support dev remove when phy status is MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT
  [SCSI] mpt2sas: Timeout occurred within the HANDSHAKE logic while waiting on firmware to ACK.
  [SCSI] mpt2sas: Call init_completion on a per request basis.
  [SCSI] mpt2sas: Target Reset will be issued from Interrupt context.
  [SCSI] mpt2sas: Added SCSIIO, Internal and high priority memory pools to support multiple TM
  [SCSI] mpt2sas: Copyright change to 2009.
  [SCSI] mpt2sas: Added mpi2_history.txt for MPI2 headers.
  [SCSI] mpt2sas: Update driver to MPI2 REV K headers.
  [SCSI] bfa: Brocade BFA FC SCSI driver
  ...
2009-10-11 11:12:33 -07:00
Roland Dreier
335f2d1b24 Merge branches 'cxgb3', 'misc' and 'mlx4' into for-next 2009-10-07 16:03:32 -07:00
David J. Wilder
85f20b39fd RDMA/addr: Fix resolution of local IPv6 addresses
This patch allows a local IPv6 address to be resolved by rdma_cm.

To reproduce the problem:

 $ rping -s -v -a ::0  &
 $ rping -c -v -a <IPv6 address local to this system>
 rdma_resolve_addr error -1

Local IPv6 address was obtained with "ip addr show ib0"

Addresses: https://bugs.openfabrics.org/show_bug.cgi?id=1759
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-10-07 16:03:18 -07:00
Steve Wise
e5da4ed8a4 RDMA/cxgb3: Handle NULL inetdev pointer in iwch_query_port()
in_dev_get() can return NULL.  If it does, iwch_query_port() will crash.
Handle the NULL case by mapping it to port state INIT.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-10-07 15:51:07 -07:00
Steve Wise
54e05f15cc RDMA/iwcm: Don't call provider reject func with irqs disabled
In commit cb58160e ("RDMA/iwcm: Reject the connection when the cm_id
is destroyed") a call to the provider's reject handler was added to
destroy_cm_id() to fix a provider endpoint leak.  This call needs to
be done with interrupts enabled.  So unlock and relock around this
call.  This is safe because:

1) the provider will do nothing with this endpoint until the iwcm either
   accepts or rejects.
2) the lock is only released after the iwcm state is changed, so an
   errant iwcm app that is destroying -and- rejecting the connection
   concurrently will get a failure on one of the calls.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-10-07 15:38:12 -07:00
Ben Hutchings
15f0a394c6 net: Convert ethtool {get_stats, self_test}_count() ops to get_sset_count()
These string query operations were supposed to be replaced by the
generic get_sset_count() starting in 2007.  Convert the remaining
implementations.

Also remove calls to these operations to initialise drvinfo->n_stats.
The ethtool core code already does that.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05 00:10:10 -07:00
Alexey Dobriyan
a99bbaf5ee headers: remove sched.h from poll.h
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-04 15:05:10 -07:00
Jayamohan Kallickal
b8b9e1b812 [SCSI] libiscsi: iscsi_session_setup to allow for private space
This patch contains changes that allow iscsi_session_setup
to allocate private space for LLD's

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02 14:01:39 -05:00
Alexey Dobriyan
f0f37e2f77 const: mark struct vm_struct_operations
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 11:39:25 -07:00
Linus Torvalds
d7757be133 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB: Don't turn on carrier for a non-active port
  IB/mthca: Fix access to freed memory in catastrophic event handling
  mlx4_core: Pass cache line size to device FW
  RDMA/nes: Remove duplicate .ndo_set_mac_address field initialization
  IB/mad: Fix lock-lock-timer deadlock in RMPP code
2009-09-24 17:06:01 -07:00
Roland Dreier
216c7f92b9 Merge branches 'ipoib', 'mad', 'mlx4', 'mthca' and 'nes' into for-linus 2009-09-24 12:43:08 -07:00
Moni Shoua
5ee9512084 IPoIB: Don't turn on carrier for a non-active port
Multicast joins can succeed even if the IB port is down.  This happens
when the SM runs on the same port with the requesting port.  However,
IPoIB calls netif_carrier_on() when the join of the broadcast group
succeeds, without caring about the state of the IB port.  The result
is an IPoIB interface in RUNNING state but without an active IB port
to support it.

If a bonding interface uses this IPoIB interface as a slave it might
not detect that this slave is almost useless and failover
functionality will be damaged.  The fix checks the state of the IB
port in the carrier_task before calling netif_carrier_on().

Adresses: https://bugs.openfabrics.org/show_bug.cgi?id=1726
Signed-off-by: Moni Shoua <monis@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-24 12:01:05 -07:00
Jack Morgenstein
d686159e50 IB/mthca: Fix access to freed memory in catastrophic event handling
catas_reset() uses a pointer to mthca_dev, but mthca_dev is not valid
after the call to __mthca_restart_one().

Based on a similar patch for mlx4 (634354d7, "mlx4: Fix access to
freed memory") by Vitaliy Gusev <vgusev@openvz.org>

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-24 11:55:41 -07:00
Julia Lawall
bdf643816a RDMA/nes: Remove duplicate .ndo_set_mac_address field initialization
The definition of nes_netdev_ops has initializations of a local function
and eth_mac_addr for its ndo_set_mac_address field.  This change uses only
the local function.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier I, s, fld;
position p0,p;
expression E;
@@

struct I s =@p0 { ... .fld@p = E, ...};

@s@
identifier I, s, r.fld;
position r.p0,p;
expression E;
@@

struct I s =@p0 { ... .fld@p = E, ...};

@script:python@
p0 << r.p0;
fld << r.fld;
ps << s.p;
pr << r.p;
@@

if int(ps[0].line)!=int(pr[0].line) or int(ps[0].column)!=int(pr[0].column):
  cocci.print_main(fld,p0)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-24 10:59:34 -07:00
Roland Dreier
0e442afd92 IB/mad: Fix lock-lock-timer deadlock in RMPP code
Holding agent->lock across cancel_delayed_work() (which does
del_timer_sync()) in ib_cancel_rmpp_recvs() leads to lockdep reports of
possible lock-timer deadlocks if a consumer ever does something that
connects agent->lock to a lock taken in IRQ context (cf
http://marc.info/?l=linux-rdma&m=125243699026045).

Fix this by changing the list items to a new state "CANCELING" while
holding the lock, and then canceling the delayed work without holding
the lock.  If the delayed work runs after the lock is dropped, it will
see the state is CANCELING and return immediately, so the list will
stay stable while we traverse it with the lock not held.

Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-23 11:10:15 -07:00
KAMEZAWA Hiroyuki
908eedc616 walk system ram range
Originally, walk_memory_resource() was introduced to traverse all memory
of "System RAM" for detecting memory hotplug/unplug range.  For doing so,
flags of IORESOUCE_MEM|IORESOURCE_BUSY was used and this was enough for
memory hotplug.

But for using other purpose, /proc/kcore, this may includes some firmware
area marked as IORESOURCE_BUSY | IORESOUCE_MEM.  This patch makes the
check strict to find out busy "System RAM".

Note: PPC64 keeps their own walk_memory_resouce(), which walk through
ppc64's lmb informaton.  Because old kclist_add() is called per lmb, this
patch makes no difference in behavior, finally.

And this patch removes CONFIG_MEMORY_HOTPLUG check from this function.
Because pfn_valid() just show "there is memmap or not* and cannot be used
for "there is physical memory or not", this function is useful in generic
to scan physical memory range.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Américo Wang <xiyou.wangcong@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:41 -07:00
Anand Gadiyar
411c940385 trivial: fix typo "for for" in multiple files
trivial: fix typo "for for" in multiple files

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:54 +02:00
David Brownell
a4dbd6740d driver model: constify attribute groups
Let attribute group vectors be declared "const".  We'd
like to let most attribute metadata live in read-only
sections... this is a start.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15 09:50:47 -07:00
Linus Torvalds
d7e9660ad9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits)
  netxen: update copyright
  netxen: fix tx timeout recovery
  netxen: fix file firmware leak
  netxen: improve pci memory access
  netxen: change firmware write size
  tg3: Fix return ring size breakage
  netxen: build fix for INET=n
  cdc-phonet: autoconfigure Phonet address
  Phonet: back-end for autoconfigured addresses
  Phonet: fix netlink address dump error handling
  ipv6: Add IFA_F_DADFAILED flag
  net: Add DEVTYPE support for Ethernet based devices
  mv643xx_eth.c: remove unused txq_set_wrr()
  ucc_geth: Fix hangs after switching from full to half duplex
  ucc_geth: Rearrange some code to avoid forward declarations
  phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs
  drivers/net/phy: introduce missing kfree
  drivers/net/wan: introduce missing kfree
  net: force bridge module(s) to be GPL
  Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded
  ...

Fixed up trivial conflicts:

 - arch/x86/include/asm/socket.h

   converted to <asm-generic/socket.h> in the x86 tree.  The generic
   header has the same new #define's, so that works out fine.

 - drivers/net/tun.c

   fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that
   switched over to using 'tun->socket.sk' instead of the redundantly
   available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks
   to the TUN driver") which added a new 'tun->sk' use.

   Noted in 'next' by Stephen Rothwell.
2009-09-14 10:37:28 -07:00
Roland Dreier
73f526da02 Merge branch 'mad' into for-linus
Conflicts:
	drivers/infiniband/core/mad.c
2009-09-10 21:19:45 -07:00
Roland Dreier
45c448a1c0 Merge branches 'cxgb3', 'ehca', 'ipath', 'ipoib', 'misc', 'mlx4', 'mthca' and 'nes' into for-linus 2009-09-10 21:18:07 -07:00
Steve Wise
cb58160e72 RDMA/iwcm: Reject the connection when the cm_id is destroyed
If the cm_id of a connect request is destroyed prior to the ULP
accepting or rejecting the connection, then the provider never cleans
up the connection.  The iwcm should explicitly reject these
connections if the cm_id is destroyed.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-09 11:37:38 -07:00
Steve Wise
ffc40c6433 RDMA/cxgb3: Clean up properly on FW mismatch failures
FW mismatches can cause a crash in the iw_cxgb3 event handler.

- NULL the t3cdev->ulp pointer on failures in cxio_rdev_open()
- Silently ignore events when the ulp ptr is NULL in iwch_err_handler()

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-09 11:25:56 -07:00
Steve Wise
13a239330a RDMA/cxgb3: Don't ignore insert_handle() failures
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-09 11:25:55 -07:00
Hal Rosenstock
b76aabc395 IB/mad: Allow tuning of QP0 and QP1 sizes
MADs are UD and can be dropped if there are no receives posted, so
allow receive queue size to be set with a module parameter in case the
queue needs to be lengthened.  Send side tuning is done for symmetry
with receive.

Signed-off-by: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-07 08:28:48 -07:00
Roland Dreier
6b2eef8fd7 IB/mad: Fix possible lock-lock-timer deadlock
Lockdep reported a possible deadlock with cm_id_priv->lock,
mad_agent_priv->lock and mad_agent_priv->timed_work.timer; this
happens because the mad module does

	cancel_delayed_work(&mad_agent_priv->timed_work);

while holding mad_agent_priv->lock.  cancel_delayed_work() internally
does del_timer_sync(&mad_agent_priv->timed_work.timer).

This can turn into a deadlock because mad_agent_priv->lock is taken
inside cm_id_priv->lock, so we can get the following set of contexts
that deadlock each other:

 A: holding cm_id_priv->lock, waiting for mad_agent_priv->lock
 B: holding mad_agent_priv->lock, waiting for del_timer_sync()
 C: interrupt during mad_agent_priv->timed_work.timer that takes
    cm_id_priv->lock

Fix this by using the new __cancel_delayed_work() interface (which
internally does del_timer() instead of del_timer_sync()) in all the
places where we are holding a lock.

Addresses: http://bugzilla.kernel.org/show_bug.cgi?id=13757
Reported-by: Bart Van Assche <bart.vanassche@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-07 08:27:50 -07:00
Chien Tung
cd1d3f7abe RDMA/nes: Map MTU to IB_MTU_* and correctly report link state
Old query_port code reports static MTU and link state values.
Instead, map actual MTU to next largest IB_MTU_* constant and
correctly report link state.

Cc: Steve Wise <swise@opengridcomputing.com>
Reported-by: Jeff Squyres <jsquyres@cisco.com>
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:39 -07:00
Don Wood
b29a4fc49b RDMA/nes: Rework the disconn routine for terminate and flushing
The disconn routine has been reworked to acoomodate the terminate and
flushing changes.  The routine has been reorganized to make all the
decisions at the start then it performs all the required operations.
This simplified the lock handling and is easier to follow.

Signed-off-by: Don Wood <donald.e.wood@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:39 -07:00
Don Wood
320cdfd21d RDMA/nes: Use the flush code to fill in cqe error
Use the flush status to fill in cqe status when a specific error has
been identified.  Subsequent flushed completions still use the flushed
value.

Signed-off-by: Don Wood <donald.e.wood@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:39 -07:00
Don Wood
6eed5e7c8b RDMA/nes: Make poll_cq return correct number of wqes during flush
When a flush request is given to the hw, it will place one cqe marked
as flushed (unless there is nothing to flush).  An application that is
waiting for all wqe's to complete will be left hanging.  This modifies
poll_cq to return the correct number of flushes for the pending
elements on the wq.

Signed-off-by: Don Wood <donald.e.wood@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:39 -07:00
Don Wood
4b281faec3 RDMA/nes: Use flush mechanism to set status for wqe in error
When an asynchronous event occurs that requires a terminate, it is
sometimes possible to identify the wqe in error.  This change uses
flush to get this information to the poll routine.  The flush
operation puts the status into the cqe.  If this information is not
available, it continues to use the more generic flush code as before.

Signed-off-by: Don Wood <donald.e.wood@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:38 -07:00
Don Wood
8b1c9dc4ba RDMA/nes: Implement Terminate Packet
Implement the sending and receiving of Terminate packets.

Signed-off-by: Don Wood <donald.e.wood@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:38 -07:00
Don Wood
3c28b4457a RDMA/nes: Add CQ error handling
CQ errors are not being handled correctly.  Put in the the upcall for
CQ errors.

Signed-off-by: Don Wood <donald.e.wood@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:38 -07:00
Don Wood
5ee21fe0ea RDMA/nes: Clean out CQ completions when QP is destroyed
When a QP is destroyed, unprocessed CQ entries could still reference
the QP.  This change zeroes the context value at QP destroy time.  By
skipping over cqe's with a zero context, poll_cq no longer processes a
cqe for a destroyed QP.

Signed-off-by: Don Wood <donald.e.wood@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:37 -07:00
Don Wood
ba0c5d9a89 RDMA/nes: Change memory allocation for cqp request to GFP_ATOMIC
The routine to allocate a cqp request is not called from process
context code.  Since it is not OK to sleep, it needs to use GFP_ATOMIC
not GFP_KERNEL.

Signed-off-by: Don Wood <donald.e.wood@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:37 -07:00
Don Wood
873fcdd4bf RDMA/nes: Allocate work item for disconnect event handling
The code currently has a work structure in the QP.  This requires a
lock and a pending flag to ensure there is never more than one request
active.  When two events happen quickly (such as FIN and LLP CLOSE),
it causes unnecessary timeouts since the second one is dropped.

This fix allocates memory for the work request so the second one can
be queued.  A lock is removed since it is no longer needed.

Signed-off-by: Don Wood <donald.e.wood@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:37 -07:00
Don Wood
c4c3f279cd RDMA/nes: Update refcnt during disconnect
During termination, it is possible for the refcnt to go to zero while
the worker thread is posting events upward.  This fix increments the
refcnt before the request is passed to the worker thread.  The thread
decrements the refcnt when the request is completed.

Signed-off-by: Don Wood <donald.e.wood@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:36 -07:00
Jack Morgenstein
d841064777 IB/mthca: Don't allow userspace open while recovering from catastrophic error
Userspace apps are supposed to release all ib device resources if they
receive a fatal async event (IBV_EVENT_DEVICE_FATAL).  However, the
app has no way of knowing when the device has come back up, except to
repeatedly attempt ibv_open_device() until it succeeds.

However, currently there is no protection against the open succeeding
while the device is in being removed following the fatal event.  In
this case, the open will succeed, but as a result the device waits in
the middle of its removal until the new app releases its resources --
and the new app will not do so, since the open succeeded at a point
following the fatal event generation.

This patch adds an "active" flag to the device. The active flag is set
to false (in the fatal event flow) before the "fatal" event is
generated, so any subsequent ibv_dev_open() call to the device will
fail until the device comes back up, thus preventing the above
deadlock.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:16 -07:00
Arputham Benjamin
d94a868901 IB/mthca: Distinguish multiple devices in /proc/interrupts
When the mthca driver uses the same name for interrupts for every
device in the system.  This can make it very confusing trying to work
out exactly which device MSI-X interrupts are for.  Change the driver
to add the PCI name of the device to the interrupt name.

Signed-off-by: Arputham Benjamin <abenjamin@sgi.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:15 -07:00
Roland Dreier
ffe063f32b IB/mthca: Annotate CQ locking
mthca_ib_lock_cqs()/mthca_ib_unlock_cqs() are helper functions that
lock/unlock both CQs attached to a QP in the proper order to avoid
AB-BA deadlocks.  Annotate this so sparse can understand what's going
on (and warn us if we misuse these functions).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:15 -07:00
Roland Dreier
deecb5d672 IB/mthca: Remove unnecessary include of <linux/init.h>
mthca_reset.c doesn't have any function annotations, so there's no
reason to include <linux/init.h>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:15 -07:00
Roland Dreier
fc1285585f IB/mthca: Remove unnecessary include of <asm/page.h>
mthca_config_reg.h was including <asm/page.h> for no reason -- the whole
file is just defines of constants, so it's entirely self-contained.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:13 -07:00
Jack Morgenstein
3b4a8cd51e IB/mlx4: Don't allow userspace open while recovering from catastrophic error
Userspace apps are supposed to release all ib device resources if they
receive a fatal async event (IBV_EVENT_DEVICE_FATAL).  However, the
app has no way of knowing when the device has come back up, except to
repeatedly attempt ibv_open_device() until it succeeds.

However, currently there is no protection against the open succeeding
while the device is in being removed following the fatal event.  In
this case, the open will succeed, but as a result the device waits in
the middle of its removal until the new app releases its resources --
and the new app will not do so, since the open succeeded at a point
following the fatal event generation.

This patch adds an "active" flag to the device. The active flag is set
to false (in the fatal event flow) before the "fatal" event is
generated, so any subsequent ibv_dev_open() call to the device will
fail until the device comes back up, thus preventing the above
deadlock.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:24:50 -07:00
Roland Dreier
338a8fad27 IB/mlx4: Annotate CQ locking
mlx4_ib_lock_cqs()/mlx4_ib_unlock_cqs() are helper functions that
lock/unlock both CQs attached to a QP in the proper order to avoid
AB-BA deadlocks.  Annotate this so sparse can understand what's going
on (and warn us if we misuse these functions).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:24:49 -07:00
Roel Kluin
1493ab4083 RDMA/amso1100: Check kmalloc() result in c2_register_device()
dev->ibdev.iwcm allocation may fail, prevent a dereference.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:24:24 -07:00
Jack Morgenstein
b1b8afb833 IB/uverbs: Return ENOSYS for unimplemented commands (not EINVAL)
Since the original commit 883a99c7 ("[IB] uverbs: Add a mask of device
methods allowed for userspace"), the uverbs core returns EINVAL for
commands not implemented by a specific low-level driver.

This creates a problem that there is no way to tell the difference
between an unimplemented command and an implemented one which is
incorrectly invoked (which also returns EINVAL).

The fix is to have unimplemented commands return ENOSYS.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:24:24 -07:00
Yossi Etigin
e1d7806df3 IB/core: Fix send multicast group leave retry
Until now, retries were only sent when joining a multicast group. This
patch will adds retries when leaving a multicast group as well.

Signed-off-by: Ron Livne <ronli@voltaire.com>
Signed-off-by: Yossi Etigin <yosefe@voltaire.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:24:24 -07:00
Marcin Slusarz
f1aa78b26e IB: Use printk_once() for driver versions
Replace open-coded reimplementations with printk_once().

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:24:24 -07:00