Allow user to configure the CCS mode setting through a
'ccs_mode' sysfs interface. Also report the current
CCS mode configuration and number of compute slices
available through this interface.
v2: Rebase, make it platform agnostic
v3: Separte out num_cslices sysfs interface and make
xe_gt_ccs_mode_sysfs_init() return void
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Disable dynamic HW load balancing of compute resource assignment
to engines and instead enabled fixed mode of mapping compute
resources to engines on all platforms with more than one compute
engine.
By default enable only one CCS engine with all compute slices
assigned to it. This is the desired configuration for common
workloads.
PVC platform supports only the fixed CCS mode (workaround 16016805146).
v2: Rebase, make it platform agnostic
v3: Minor code refactoring
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Earlier GuC load will require more fine-grained control over reset.
Extract it outside of xe_uc_init_hw.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
GuC will need to be loaded earlier during probe. And in order to load
GuC, being able to take the forcewake is going to be needed.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Prep this file to contain C6 toggling as well instead
of just sysfs related stuff.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When the GSC FW is loaded, we need to inform it when a GSCCS reset is
coming and then wait 200ms for it to get ready to process the reset.
v2: move WA code to GSC file, use variable in Makefile (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
After noticing in logs there were still mentions to GEN6 registers, it
was clear commit d9b79ad275 ("drm/xe: Drop gen afixes from registers")
didn't take care of all the afixes. Some were added later, but there are
also constants and strings still using that. Continue the cleanup
removing the remaining ones.
To keep it consistent with code nearby, a few other changes are made:
- Remove prefix in INTEL_LEGACY_64B_CONTEXT
- Remove GEN8_CTX_L3LLC_COHERENT since it's unused
- Rename GEN9_FREQ_SCALER to GT_FREQUENCY_SCALER
v2: Use XELP_ as prefix for NUM_MOCS_ENTRIES and remove changes to
MOCS_ENTRIES as this is now done as part of a previous commit
(Matt Roper)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231117174049.527192-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Most constants defined in xe_drm.h use DRM_XE_ as prefix which is
helpful to identify the name space. Make this systematic and add
this prefix where it was missing.
v2:
- fix vertical alignment of define values
- remove double DRM_ in some variables (José Roberto de Souza)
v3: Rebase
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Starting GT freq is usually RPn. Raising freq to RP0 will
help speed up GuC load times. As an example, this data was
collected on DG2-
GuC Load time @RPn ~ 41 ms
GuC Load time @RP0 ~ 11 ms
v2: Raise GT freq before hwconfig init. This will speed up
both HuC and GuC loads. Address review comments (Rodrigo).
Also add a small usleep after requesting frequency which gives
pcode some time to react.
v3: Address checkpatch issue
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Driver initiated function-reset (FLR) is the highest level of reset
that we can trigger from within the driver. In contrast to PCI FLR it
doesn't require re-enumeration of PCI BAR. It can be useful in case
GT fails to reset. It is also the only way to trigger GSC reset from
the driver and can be used in future addition of GSC support.
v2:
- use regs from xe_regs.h
- move the flag to xe.mmio
- call flr only on root gt
- use BIOS protection check
- copy/paste comments from i915
v3:
- flr code moved to xe_device.c
v4:
- needs_flr_on_fini moved to xe_device
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When recording the default LRC, the expectation is that the hardware's
original state settings (both register and instruction) will be written
out to the LRC upon first context switch. For many 3DSTATE_* state
instructions that don't truly have "default" values, this translates to
a simple instruction header (opcodes + dword length) being written to
the LRC, followed by an appropriate number of blank dwords as a place
holder. When userspace creates a context (which starts as a copy of the
default LRC), they'll generally emit real 3DSTATE_* as part of their
initialization to select the settings they desire. If they don't emit
one of the 3DSTATE instructions, then the zeroed dwords that remain in
their LRC image generally translate to various state remaining disabled.
This will either be what userspace wants or will lead to very
reproducible and easily-debugged problems (rendering glitches, engine
hangs).
It turns out that a subset of the 3DSTATE instructions, specifically
those belonging to the SVG (State Variable - Global) unit, are not only
emitting 0's for the instruction's "body" dwords, but also for the
instruction header dword if no specific state has been explicitly set
before context switch. This means that when the hardware switches to a
context that hasn't explicitly provided an appropriate state setting,
the hardware will just see a sequence of NOOPs in the spot reserved for
that 3DSTATE instruction while executing the LRC, and the actual
hardware state setting will unintentionally inherit the configuration
used by the previously running context. Now when userspace makes a
mistake and forgets to emit an important state instruction they no
longer get consistent, easily-reproducible corruption/hangs, but rather
erratic behavior where the presence/absence of a problem depends on what
other workloads are running on the system and what order the contexts
are scheduled on the engine.
A specific example of this that came up recently related to mesh shading
The OpenGL driver was not specifically emitting a 3DSTATE_MESH_CONTROL
to disable mesh shading at context init, so on context switch, mesh
shading would either be on or off depending on what the previous context
had been doing. Vulkan apps _were_ enabling mesh shading, so running a
Vulkan app and then context switching to an OpenGL app resulted in mesh
shading still unexpectedly being enabled during OpenGL operation, and
since other Mesh-related state was not properly initialized for that
context a GPU hang was seen. Due to the specific ordering requirements
(Vulkan app runs first, followed by OpenGL app), it took additional
debug effort to track down the cause of the problem.
There are various workarounds related to this behavior, with current
implementations handled in the userspace drivers. E.g., Wa_14019789679
and Wa_22018402687. However it's been suggested that the kernel driver
can help simplify things here by emitting zeroed SVG state with proper
instruction headers as part of our default context creation (i.e., at
the same point we apply LRC workarounds). This will help ensure that
any future cases where a userspace driver does not emit an important
state setting will result in consistent behavior.
Bspec: 46261
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20231025151732.3461842-7-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On some platforms we need to emit some non-register state while
recording an engine class' default LRC. Add the infrastructure to
support this; actual per-platform tables will be added in future
patches.
v2:
- Checkpatch whitespace fix
- Add extra assertion to ensure num_dw != 0. (Bala)
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20231025151732.3461842-6-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Extracting the common MI_* instructions that can be used with any engine
to their own header will make it easier as we add additional engine
instructions in upcoming patches.
Also, since the majority of GPU instructions (both MI and non-MI) have
a "length" field in bits 7:0 of the instruction header, a common define
is added for that. Instruction-specific length fields are still defined
for special case instructions that have larger/smaller length fields.
v2:
- Use "instr" instead of "inst" as the short form of "instruction"
everywhere. (Lucas)
- Include xe_reg_defs.h instead of the i915 compat header. (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231016163449.1300701-12-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Keeping the number of registers to be loaded as a separate macro from
the instruction opcode will simplify some upcoming LRC parsing code.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231016163449.1300701-10-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When failing on early initialization, one cause may be that the PAT
configuration is not correct. Dump it for ease of debugging.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231006182325.3617685-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When working without GuC (i.e. working with execlists), the flow
attempts to perform suspend operation which is failing due to a
lack of support without GuC.
If PM ops are not supported without GuC we may as well avoid PM
registration rather than returning errors from various PM flows.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The guc_submission_enabled() function is being used as a boolean toggle
for all firmwares and all related features, not just GuC submission. We
could add additional flags/functions to distinguish and allow different
use-cases (e.g. loading HuC but not using GuC submission), but given
that not using GuC is a debug-only scenario having a global switch for
all FWs is enough. However, we want to make it clear that this switch
turns off everything, so rename it to uc_enabled().
v2: rebase on s/XE_WARN_ON/xe_assert
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are a set of engine group busyness counters provided by HW which are
perfect fit to be exposed via PMU perf events.
BSPEC: 46559, 46560, 46722, 46729, 52071, 71028
events can be listed using:
perf list
xe_0000_03_00.0/any-engine-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/copy-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/interrupts/ [Kernel PMU event]
xe_0000_03_00.0/media-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/render-group-busy-gt0/ [Kernel PMU event]
and can be read using:
perf stat -e "xe_0000_8c_00.0/render-group-busy-gt0/" -I 1000
time counts unit events
1.001139062 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
2.003294678 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
3.005199582 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
4.007076497 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
5.008553068 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
6.010531563 43520 ns xe_0000_8c_00.0/render-group-busy-gt0/
7.012468029 44800 ns xe_0000_8c_00.0/render-group-busy-gt0/
8.013463515 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
9.015300183 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.017233010 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.971934120 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
The pmu base implementation is taken from i915.
v2:
Store last known value when device is awake return that while the GT is
suspended and then update the driver copy when read during awake.
v3:
1. drop init_samples, as storing counters before going to suspend should
be sufficient.
2. ported the "drm/i915/pmu: Make PMU sample array two-dimensional" and
dropped helpers to store and read samples.
3. use xe_device_mem_access_get_if_ongoing to check if device is active
before reading the OA registers.
4. dropped format attr as no longer needed
5. introduce xe_pmu_suspend to call engine_group_busyness_store
6. few other nits.
v4: minor nits.
v5: take forcewake when accessing the OAG registers
v6:
1. drop engine_busyness_sample_type
2. update UAPI documentation
v7:
1. update UAPI documentation
2. drop MEDIA_GT specific change for media busyness counter.
Co-developed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Co-developed-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The XE_WARN_ON macro maps to WARN_ON which is not justified
in many cases where only a simple debug check is needed.
Replace the use of the XE_WARN_ON macro with the new xe_assert
macros which relies on drm_*. This takes a struct drm_device
argument, which is one of the main changes in this commit. The
other main change is that the condition is reversed, as with
XE_WARN_ON a message is displayed if the condition is true,
whereas with xe_assert it is if the condition is false.
v2:
- Rebase
- Keep WARN splats in xe_wopcm.c (Matt Roper)
v3:
- Rebase
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fix 2 issues when writing LRC workarounds by copying the same handling
done when processing other RTP entries:
For masked registers, it was not correctly setting the upper 16bits.
Differently than i915, the entry itself doesn't set the upper bits
for masked registers: this is done when applying them. Testing on ADL-P:
Before:
[drm:xe_gt_record_default_lrcs [xe]] LRC WA rcs0 save-restore MMIOs
[drm:xe_gt_record_default_lrcs [xe]] REG[0x2580] = 0x00000002
...
[drm:xe_gt_record_default_lrcs [xe]] REG[0x7018] = 0x00002000
[drm:xe_gt_record_default_lrcs [xe]] REG[0x7300] = 0x00000040
[drm:xe_gt_record_default_lrcs [xe]] REG[0x7304] = 0x00000200
After:
[drm:xe_gt_record_default_lrcs [xe]] LRC WA rcs0 save-restore MMIOs
[drm:xe_gt_record_default_lrcs [xe]] REG[0x2580] = 0x00060002
...
[drm:xe_gt_record_default_lrcs [xe]] REG[0x7018] = 0x20002000
[drm:xe_gt_record_default_lrcs [xe]] REG[0x7300] = 0x00400040
[drm:xe_gt_record_default_lrcs [xe]] REG[0x7304] = 0x02000200
All of these registers are masked registers, so writing to them without
the relevant bits in the upper 16b doesn't have any effect.
Also, this adds support to regular registers; previously it was assumed
that LRC entries would only contain masked registers. However this is
not true. 0x6604 is not a masked register, but used in workarounds for
e.g. ADL-P. See commit 28cf243a34 ("drm/i915/gt: Fix context
workarounds with non-masked regs"). In the same test with ADL-P as
above:
Before:
[drm:xe_gt_record_default_lrcs [xe]] REG[0x6604] = 0xe0000000
After:
[drm:xe_gt_record_default_lrcs [xe]] REG[0x6604] = 0xe0efef6f
As can be seen, now it will read what was in the register rather than
completely overwrite the other bits.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230906012053.1733755-5-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Just like the GT and engine workarounds, add debug message with the
final value being written to the register for easy debugging.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230906012053.1733755-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The current only submission in the driver that doesn't use a vm is the
WA setup. We still pass a vm structure (the migration one), but we don't
actually use it at submission time and we instead have an hack to use
GGTT for this particular engine.
Instead of special-casing the WA engine, we can skip providing a VM and
use that as selector for whether to use GGTT or PPGTT. As part of this
change, we can drop the special engine flag for the WA engine and switch
the WA submission to use the standard job functions instead of dedicated
ones.
v2: rebased on s/engine/exec_queue
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20230822173334.1664332-4-daniele.ceraolospurio@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add engines sysfs directory under its GT and
create sub directory for all engine class
(note its not per instance) present on GT.
For example,
DUT# cat /sys/class/drm/cardX/device/tileN/gtN/engines/
bcs/ ccs/
V9 :
- Add missing drmm_add_action_or_reset
V8 :
- Rebase
V7 :
- Remove xe_gt.h from .h and include in .c - Matt
V6 :
- Add kernel doc and arrange file in make file by alphabet - Matt
V5 :
- replace xe_engine with xe_hw_engine - Matt
V4 :
- Rebase to resolve conflicts - CI
V3 :
- Move code in its own file
- Rename API name
V2 :
- Correct class mask logic - Himal
- Remove extra parenthesis
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Engine was inappropriately used to refer to execution queues and it
also created some confusion with hardware engines. Where it applies
the exec_queue variable name is changed to q and comments are also
updated.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/162
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is a preparation commit for a larger renaming of engine to exec queue.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Send uevent in case of gt reset failure. This intimation can be used by
userspace monitoring tool to do the device level reset/reboot
when GT reset fails. udevadm can be used to monitor the uevents.
v2:
- Support only gt failure notification (Rodrigo)
v3
- Rectify the comments in header file.
v4
- Use pci kobj instead of drm kobj for notification.(Rodrigo)
- Cleanup (Badal)
v5
- Add tile id and gt id as additional info provided by uevent.
- Provide code documentation for the uevent. (Rodrigo)
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The order: 'offset, mask, val'; is more common in other
drivers and in special in i915, where any dev could copy
a sequence and end up with unexpected behavior.
Done with coccinelle:
@rule1@
expression gt, reg, val, mask, timeout, out, atomic;
@@
- xe_mmio_wait32(gt, reg, val, mask, timeout, out, atomic)
+ xe_mmio_wait32(gt, reg, mask, val, timeout, out, atomic)
spatch -sp_file mmio.cocci *.c *.h compat-i915-headers/intel_uncore.h \
--in-place
v2: Rebased after changes on xe_guc_mcr usage of xe_mmio_wait32.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Only call access_put after dropping the forcewake. In theory the device
could suspend, but really we want to start asserting that we have a
mem_access.ref when touching mmio.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently GuCRC is disabled in suspend path for xe.
Rc6 is a prerequiste to enable s0ix and
should not be disabled for s2idle. There is no requirement
to disable GuCRC for S3+.
Remove it from xe_guc_pc_stop, thus removing from suspend path.
Retain the call in other places where xe_guc_pc_stop is
called.
v2: add description and return statement to kernel-doc (Rodrigo)
v3: update commit message (Rodrigo)
v4: add mem_access_get to the gucrc disable function
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Assumption here is that submission is disabled along with CT, and full
GT reset will also nuke TLBs, so should be safe to signal all in-flight
TLB fences, but only after the actual reset so move the placement
slightly.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
1) Add a new sysfs directory under devices/gt#/ called gtidle
to contain idle properties of GT such as name, idle_status,
idle_residency_ms
2) Remove forcewake calls for residency counter
v2:
- abstract using function pointers (Anshuman)
- remove forcewake calls for residency counter
- use device_attr (Badal)
- move rc functions to guc_pc
- change name to gt_idle (Rodrigo)
v3:
- return error for drmm_add_action_or_reset
- replace file and functions with gt_idle prefix
to gt_idle_sysfs (Himal)
- use enum for gt idle state
- move multiplier to gt idle and initialize (Anshuman)
- correct doc annotation (Rodrigo)
- remove return variable
- use kobj_gt instead of new gtidle kobj
- move residency_ms to gtidle file
- retain xe_guc_pc prefix for functions in guc_rc file (Michal)
v4:
- fix doc errors in xe_guc_pc file
- change u64 to u32 for reading residency counter
- keep gtidle states generic GT_IDLE_C[0/6] (Anshuman)
v5:
- update commit message to include removal of
forcewake calls (Anshuman)
- return void from sysfs initialization function and add warnings
(Andi)
v6:
- remove extra lines (Anshuman)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
All other parameters can be extracted from a single struct xe_hw_engine
reference. This removes redundancy and simplifies the code.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230609143815.302540-2-gustavo.sousa@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_mocs_init_early doesn't touch the hardware, it just sets up internal
software state. There's no need to perform this step in the "forcewake
held" region. Moving the init earlier will also make the uc_index
values available earlier which will be important for an upcoming GuC
init patch.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20230602235210.1314028-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The majority of xe_gt_irq_postinstall() is really focused on the
hardware engine interrupts; other GT-related interrupts such as the GuC
are enabled/disabled independently. Renaming the function and making it
truly GT-specific will make it more clear what the intended focus is.
Disabling/masking of other interrupts (such as GuC interrupts) is
unnecessary since that has already happened during the irq_reset stage,
and doing so will become harmful once the media GT is re-enabled since
calls to xe_gt_irq_postinstall during media GT initialization would
incorrectly disable the primary GT's GuC interrupts.
Also, since this function is called from gt_fw_domain_init(), it's not
necessary to also call it earlier during xe_irq_postinstall; just
xe_irq_resume to handle runtime resume should be sufficient.
v2:
- Drop unnecessary !gt check. (Lucas)
- Reword some comments about enable/unmask for clarity. (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-26-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
IRQ delivery and handling needs to be handled on a per-tile basis. Note
that this is true even for the "GT interrupts" relating to engines and
GuCs --- the interrupts relating to both GTs get raised through a single
set of registers in the tile's sgunit range.
On true multi-tile platforms, interrupts on remote tiles are internally
forwarded to the root tile; the first thing the top-level interrupt
handler should do is consult the root tile's instance of
DG1_MSTR_TILE_INTR to determine which tile(s) had interrupts. This
register is also responsible for enabling/disabling top-level reporting
of any interrupts to the OS. Although this register technically exists
on all tiles, it should only be used on the root tile.
The (mis)use of struct xe_gt as a target for MMIO operations in the
driver makes the code somewhat confusing since we wind up needing a GT
pointer to handle programming that's unrelated to the GT. To mitigate
this confusion, all of the xe_gt structures used solely as an MMIO
target in interrupt code are renamed to 'mmio' so that it's clear that
the structure being passed does not necessarily relate to any specific
GT (primary or media) that we might be dealing with interrupts for.
Reworking the driver's MMIO handling to not be dependent on xe_gt is
planned as a future patch series.
Note that GT initialization code currently calls xe_gt_irq_postinstall()
in an attempt to enable the HWE interrupts for the GT being initialized.
Unfortunately xe_gt_irq_postinstall() doesn't really match its name and
does a bunch of other stuff unrelated to the GT interrupts (such as
enabling the top-level device interrupts). That will be addressed in
future patches.
v2:
- Clarify commit message with explanation of why DG1_MSTR_TILE_INTR is
only used on the root tile, even though it's an sgunit register that
is technically present in each tile's MMIO space. (Aravind)
- Also clarify that the xe_gt used as a target for MMIO operations may
or may not relate to the GT we're dealing with for interrupts.
(Lucas)
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-22-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In preparation for re-adding media GT support, switch the primary GT
within the tile to a dynamic allocation.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-19-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Migration primarily focuses on the memory associated with a tile, so it
makes more sense to track this at the tile level (especially since the
driver was already skipping migration operations on media GTs).
Note that the blitter engine used to perform the migration always lives
in the tile's primary GT today. In theory that could change if media
GTs ever start including blitter engines in the future, but we can
extend the design if/when that happens in the future.
v2:
- Fix kunit test build
- Kerneldoc parameter name update
v3:
- Removed leftover prototype for removed function. (Gustavo)
- Remove unrelated / unwanted error handling change. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-15-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since memory and address spaces are a tile concept rather than a GT
concept, we need to plumb tile-based handling through lots of
memory-related code.
Note that one remaining shortcoming here that will need to be addressed
before media GT support can be re-enabled is that although the address
space is shared between a tile's GTs, each GT caches the PTEs
independently in their own TLB and thus TLB invalidation should be
handled at the GT level.
v2:
- Fix kunit test build.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-13-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On platforms with VRAM, the VRAM is associated with the tile, not the
GT.
v2:
- Unsquash the GGTT handling back into its own patch.
- Fix kunit test build
v3:
- Tweak the "FIXME" comment to clarify that this function will be
completely gone by the end of the series. (Lucas)
v4:
- Move a few changes that were supposed to be part of the GGTT patch
back to that commit. (Gustavo)
v5:
- Kerneldoc parameter name fix.
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-11-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The GGTT exists at the tile level. When a tile contains multiple GTs,
they share the same GGTT.
v2:
- Include some changes that were mis-squashed into the VRAM patch.
(Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-9-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are WAs that, due to their nature, cannot be applied from a
central place like xe_wa.c. Those are peppered around the rest of the
code, as needed. Now they have a new name: "out-of-band workarounds".
These workarounds have their names and rules still grouped in xe_wa.c,
inside the xe_wa_oob array, which is generated at compile time by
xe_wa_oob.rules and the hostprog xe_gen_wa_oob. The code generation
guarantees that the header xe_wa_oob.h contains the IDs for the
workarounds that match the index in the table. This way the runtime
checks that are spread throughout the code are simple tests against the
bitmap saved during initialization.
v2: Fix prev_name tracking not working when it's empty, i.e. when there
is more than 1 continuation rule.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230526164358.86393-13-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Allocate the data to track workarounds on each gt of the device,
and pass that to RTP so the active workarounds are tracked.
Even if the workarounds available until now are mostly device
or platform centric, with the different IP versions for media and
graphics starting with MTL, it's possible that some workarounds
need to be applied only on select GTs. Also, given the workaround
database is per IP block, for tracking purposes there is no need to
differentiate the workarounds per engine class. Hence the bitmask
to track active workarounds can be tracked per GT.
v2: Move the tracking from per-device to per-GT basis (Matt Roper)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230526164358.86393-7-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Convert all the callers to deal with xe_mmio_*() using struct xe_reg
instead of plain u32. In a few places there was also a rename
s/reg/reg_val/ when dealing with the value returned so it doesn't get
mixed up with the register address.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230508225322.2692066-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
copy cs instructions that dont have a explict MOCS field will use this
default MOCS value.
v2:
- move to xe_hw_engine.c
- remove BLIT_CCTL auxiliary macros
- removed MASKED_REG
v3:
- rebased
v4:
- process workaround in hwe->reg_lrc
v5:
- add a new function and call it from xe_gt_record_default_lrcs()
because hwe->reg_lrc is initialized later
BSpec: 45807
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
CS instructions that dont have a explicit MOCS field will use this
default MOCS value.
To do this, it was necessary to initialize part of the mocs earlier
and add new function that loads another array of rtp entries set
during run-time.
This is still missing to handle of mocs read for platforms with
HAS_L3_CCS_READ(aka PVC).
v2:
- move to xe_hw_engine.c
- remove CMD_CCTL auxiliary macros
v3:
- rebased
Bspec: 45826
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The defines for the registers were brought over from i915 while
bootstrapping the driver. As xe supports TGL and later only, it doesn't
make sense to keep the GEN* prefixes and suffixes in the registers: TGL
is graphics version 12, previously called "GEN12". So drop the prefix
everywhere.
v2:
- Also drop _TGL suffix and reword commit message as suggested
by Matt Roper. While at it, rename VSUNIT_CLKGATE_DIS_TGL to
VSUNIT_CLKGATE2_DIS with the additional "2", so it doesn't clash
with the define for the other register
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The media GT requires a valid gt->kernel_bb_pool during driver probe to
allocate the WA and NOOP batchbuffers used to record default context
images. Dynamically allocate the bb_pools so that the primary and media
GT can use the same pool during driver init.
The media GT still shouldn't be need the USM pool, so only hook up the
kernel_bb_pool for now.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20230410200229.2726648-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently, unload pvc driver will generate a null dereference
and the call stack is as below.
[ 4850.618000] Call Trace:
[ 4850.620740] <TASK>
[ 4850.623134] ttm_bo_cleanup_memtype_use+0x3f/0x50 [ttm]
[ 4850.628661] ttm_bo_release+0x154/0x2c0 [ttm]
[ 4850.633317] ? drm_buddy_fini+0x62/0x80 [drm_buddy]
[ 4850.638487] ? __kmem_cache_free+0x27d/0x2c0
[ 4850.643054] ttm_bo_put+0x38/0x60 [ttm]
[ 4850.647190] xe_gem_object_free+0x1f/0x30 [xe]
[ 4850.651945] drm_gem_object_free+0x1e/0x30 [drm]
[ 4850.656904] ggtt_fini_noalloc+0x9d/0xe0 [xe]
[ 4850.661574] drm_managed_release+0xb5/0x150 [drm]
[ 4850.666617] drm_dev_release+0x30/0x50 [drm]
[ 4850.671209] devm_drm_dev_init_release+0x3c/0x60 [drm]
There are a couple issues, but the main one is due to TTM has only
one TTM_PL_TT region, but since pvc has 2 tiles and tries to setup
1 TTM_PL_TT each tile. The second will overwrite the first one.
During unload time, the first tile will reset the TTM_PL_TT manger
and when the second tile is trying to free Bo and it will generate
the null reference since the TTM manage is already got reset to 0.
The fix is to use one global TTM_PL_TT manager.
v2: make gtt mgr global and change the name to sys_mgr
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Vivi, Rodrigo <rodrigo.vivi@intel.com>
Signed-off-by: Bruce Chang <yu.bruce.chang@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Niranjana Vishwanathapura