One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp() assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv()
This data is allocated with kzalloc() so no data can leak apart
from previous readings.
A local unsigned int variable is used for the regmap call so it
is clear there is no potential issue with writing into the padding
of the structure.
Fixes: 3025c8688c ("iio: light: add support for UVIS25 sensor")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-3-jic23@kernel.org
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp() assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv().
This data is allocated with kzalloc() so no data can leak apart
from previous readings and in this case the status byte from the device.
The forced alignment of ts is not necessary in this case but it
potentially makes the code less fragile.
>From personal communications with Mikko:
We could probably split the reading of the int register, but it
would mean a significant performance cost of 20 i2c clock cycles.
Fixes: e12ffd241c ("iio: light: rpr0521 triggered buffer")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-2-jic23@kernel.org
Usual mixed bag of new drivers / device support + cleanups etc with the
addition of a fairly big set of yaml conversions.
Txt to yaml format conversions.
In some cases dropped separate binding and moved to trivial devices (drop).
Listed by manufacturer
- dht11 temperature(drop)
- adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
adi,adis16480 adi,adf4350
- ams,as3935
- asahi-kasei,ak8974
- atmel,sama5d2-adc
- avago,apds9300 avago,apds9960
- bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
- brcm,iproc-static-adc
- capella,cm36651
- domintech,dmard06(drop)
- fsl,mag3110 fsl,mma8452 fsl,vf610-dac
- hoperf,hp03
- honeywell,hmc5843
- kionix,kxcjk1013
- maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
maxim,max31856 maxim,max31855k maxim,max44009
maxim,max5481 maxim,max5821
- meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
- mediatek,mt2701-auxadc
- melexis,mlx90614 melexis,mlx90632
- memsic,mmc35240(drop)
- microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
- murata,zap2326
- nxp,fxas21002c nxp,lpc1850-dac
- pni,rm3100
- qcom,pm8018-adc qcom,spmi-iadc
- renesas,isl29501 renesas,rcar-gyroadc
- samsung,sensorhub-rinato
- sensiron,sgp30
- sentech,sx9500
- sharp,gp2ap020a00f
- st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
- ti,adc084s021 ti,ads124s08
ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
- upisemi,us51882
- vishay,vcnl4035
- x-powers,axp209
New device support
* adi,ad5685
- Add support for AD5338R dual output 10-bit DAC
- Add DT-binding doc.
* mediatek,mt6360
- New driver for this SoC ADC with bindings and using new channel label
support in the IIO core.
* st,lsm6dsx
- Add support for LSM6DST
Core:
* Add "label" to device channels, provided via a new core callback. Including
DT docs for when that is the source, and ABI docs.
* Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
* dmaengine, unwrap use of iio_buffer_set_attrs()
* Drop iio_buffer_set_attrs()
* Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
no handler has run.
* Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
any known existing drivers, but will impact a future one.
* kernel-doc fix in trigger.h
* file-ops ordering cleanup
Features
* semtech,sx9310
- Add control of hardware gain, proximity thresholds, hysteresis and
debounce.
- Increase what information on hardware configuration can be provided
via DT.
Cleanup and minor features
* adi,ad5685
- Add of_match_table
* adi,ad7292
- Drop pointless spi_set_drvdata() call
* adi,ad7298
- Drop platform data and tidy up external reference config.
* adi,ad7303
- Drop platform data handling as unused.
* adi,ad7768
- Add new label attribute for channels provided from dt.
* adi,ad7887
- devm_ usage in probe simplifying remove and error handling.
* adi,adis16201
- Drop pointless spi_set_drvdata() call
* adi,adis16209
- Drop pointless spi_set_drvdata() call
* adi,adis16240
- White space fixup
* adi,adxl372
- use new devm_iio_triggered-buffer_setup_ext()
* amlogic,meson-saradc
- Drop pointless semicolon.
* amstaos,tsl2563
- Put back i2c_device_id table as needed for greybus probing.
* atmel,at91_adc
- Use of_device_get_match_data() instead of open coding it.
- Constify some driver data
- Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
- Drop platform data as mostly dead code.
- Tidy up reference voltage logic
* atmel-sama5d2
- Drop a pointless semicolon
- Merge buffer and trigger init into a separate function
- Use new devm_iio_triggered_buff_setup_ext()
* avago,apds9960
- Drop a pointless semicolon
* bosch,bmc150
- Drop a pointless semicolon
- Use new iio_triggered_buffer_setup_ext()
* bosch,bmp280
- Drop a pointless semicolon
* fsl,mma8452
- Constification
* (google),cros_ec
- Use new devm_iio_triggered_buffer_setup_ext()
* hid-sensors
- Use new iio_triggered_buffer_setup_ext()
* ingenic,adc
- Drop a pointless semicolon
* invensense,icm426xx
- Fix MAINTAINERS entry missing :
* mediatek,mt6577_audxac
- Add binding doc for mt8516 compatible with mt8173
* motorola,cpcap-adc
- Fix an implicit fallthrough marking that clang needs to avoid warning.
* samsung,exynos-adc
- Stop relying on users counter form input device in ISR.
* st,lsm6dsx
- add vdd and vddio regulator control (including binding update)
* st,stm32-adc
- Tidy up code for dma transfers.
- Adapt clock duty cycle for proper functioning. Note no known problems
with existing boards.
* st,vl53l0x-i2c
- Put back i2c_device_id table as needed for greybus probing.
* vishay,vcnl4035
- Put back i2c_device_id table as needed for greybus probing.
-----BEGIN PGP SIGNATURE-----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=kkcj
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, features and cleanups for IIO in the 5.11 cycle
Usual mixed bag of new drivers / device support + cleanups etc with the
addition of a fairly big set of yaml conversions.
Txt to yaml format conversions.
In some cases dropped separate binding and moved to trivial devices (drop).
Listed by manufacturer
- dht11 temperature(drop)
- adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
adi,adis16480 adi,adf4350
- ams,as3935
- asahi-kasei,ak8974
- atmel,sama5d2-adc
- avago,apds9300 avago,apds9960
- bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
- brcm,iproc-static-adc
- capella,cm36651
- domintech,dmard06(drop)
- fsl,mag3110 fsl,mma8452 fsl,vf610-dac
- hoperf,hp03
- honeywell,hmc5843
- kionix,kxcjk1013
- maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
maxim,max31856 maxim,max31855k maxim,max44009
maxim,max5481 maxim,max5821
- meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
- mediatek,mt2701-auxadc
- melexis,mlx90614 melexis,mlx90632
- memsic,mmc35240(drop)
- microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
- murata,zap2326
- nxp,fxas21002c nxp,lpc1850-dac
- pni,rm3100
- qcom,pm8018-adc qcom,spmi-iadc
- renesas,isl29501 renesas,rcar-gyroadc
- samsung,sensorhub-rinato
- sensiron,sgp30
- sentech,sx9500
- sharp,gp2ap020a00f
- st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
- ti,adc084s021 ti,ads124s08
ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
- upisemi,us51882
- vishay,vcnl4035
- x-powers,axp209
New device support
* adi,ad5685
- Add support for AD5338R dual output 10-bit DAC
- Add DT-binding doc.
* mediatek,mt6360
- New driver for this SoC ADC with bindings and using new channel label
support in the IIO core.
* st,lsm6dsx
- Add support for LSM6DST
Core:
* Add "label" to device channels, provided via a new core callback. Including
DT docs for when that is the source, and ABI docs.
* Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
* dmaengine, unwrap use of iio_buffer_set_attrs()
* Drop iio_buffer_set_attrs()
* Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
no handler has run.
* Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
any known existing drivers, but will impact a future one.
* kernel-doc fix in trigger.h
* file-ops ordering cleanup
Features
* semtech,sx9310
- Add control of hardware gain, proximity thresholds, hysteresis and
debounce.
- Increase what information on hardware configuration can be provided
via DT.
Cleanup and minor features
* adi,ad5685
- Add of_match_table
* adi,ad7292
- Drop pointless spi_set_drvdata() call
* adi,ad7298
- Drop platform data and tidy up external reference config.
* adi,ad7303
- Drop platform data handling as unused.
* adi,ad7768
- Add new label attribute for channels provided from dt.
* adi,ad7887
- devm_ usage in probe simplifying remove and error handling.
* adi,adis16201
- Drop pointless spi_set_drvdata() call
* adi,adis16209
- Drop pointless spi_set_drvdata() call
* adi,adis16240
- White space fixup
* adi,adxl372
- use new devm_iio_triggered-buffer_setup_ext()
* amlogic,meson-saradc
- Drop pointless semicolon.
* amstaos,tsl2563
- Put back i2c_device_id table as needed for greybus probing.
* atmel,at91_adc
- Use of_device_get_match_data() instead of open coding it.
- Constify some driver data
- Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
- Drop platform data as mostly dead code.
- Tidy up reference voltage logic
* atmel-sama5d2
- Drop a pointless semicolon
- Merge buffer and trigger init into a separate function
- Use new devm_iio_triggered_buff_setup_ext()
* avago,apds9960
- Drop a pointless semicolon
* bosch,bmc150
- Drop a pointless semicolon
- Use new iio_triggered_buffer_setup_ext()
* bosch,bmp280
- Drop a pointless semicolon
* fsl,mma8452
- Constification
* (google),cros_ec
- Use new devm_iio_triggered_buffer_setup_ext()
* hid-sensors
- Use new iio_triggered_buffer_setup_ext()
* ingenic,adc
- Drop a pointless semicolon
* invensense,icm426xx
- Fix MAINTAINERS entry missing :
* mediatek,mt6577_audxac
- Add binding doc for mt8516 compatible with mt8173
* motorola,cpcap-adc
- Fix an implicit fallthrough marking that clang needs to avoid warning.
* samsung,exynos-adc
- Stop relying on users counter form input device in ISR.
* st,lsm6dsx
- add vdd and vddio regulator control (including binding update)
* st,stm32-adc
- Tidy up code for dma transfers.
- Adapt clock duty cycle for proper functioning. Note no known problems
with existing boards.
* st,vl53l0x-i2c
- Put back i2c_device_id table as needed for greybus probing.
* vishay,vcnl4035
- Put back i2c_device_id table as needed for greybus probing.
* tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion
dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.
dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion
dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion.
dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion
dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion.
dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion
dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion
dt-bindings:iio:light:st,vl6180: txt to yaml format conversion.
dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion
dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor
dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion.
dt-bindings:iio:light:ti,opt3001: txt to yaml conversion
dt-bindings:iio:light:maxim,max44009: txt to yaml conversion.
dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion.
dt-bindings:iio:light:capella,cm36651: txt to yaml conversion.
dt-bindings:iio:light:avago,apds9960: txt to yaml conversion
dt-bindings:iio:light:avago,apds9300: txt to yaml conversion.
dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion
dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion
...
When VCNL4035 is enabled and IIO_BUFFER is disabled, it results in the
following Kbuild warning:
WARNING: unmet direct dependencies detected for IIO_TRIGGERED_BUFFER
Depends on [n]: IIO [=y] && IIO_BUFFER [=n]
Selected by [y]:
- VCNL4035 [=y] && IIO [=y] && I2C [=y]
The reason is that VCNL4035 selects IIO_TRIGGERED_BUFFER without depending
on or selecting IIO_BUFFER while IIO_TRIGGERED_BUFFER depends on
IIO_BUFFER. This can also fail building the kernel.
Honor the kconfig dependency to remove unmet direct dependency warnings
and avoid any potential build failures.
Fixes: 55707294c4 ("iio: light: Add support for vishay vcnl4035")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209883
Link: https://lore.kernel.org/r/20201102223523.572461-1-fazilyildiran@gmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace of_property_read_u32() with device_property_read_u32(),
when reading the amstaos,cover-comp-gain.This opens up the
possibility of passing the properties during platform instantiation
of the device by a suitable populated struct property_entry.
Additionally, a minor change in logic is added to remove the
of_node present check.
Signed-off-by: Vaishnav M A <vaishnav@beagleboard.org>
Link: https://lore.kernel.org/r/20201018203552.GA816421@ubuntu
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add i2c_device_id table for the vcnl4035 driver,
enabling device instantiation using i2c_new_client_device()
or from userspace in cases where device-tree based description
is not possible now, like device(s) on a gbphy i2c adapter
created by greybus.
Signed-off-by: Vaishnav M A <vaishnav@beagleboard.org>
Link: https://lore.kernel.org/r/20201018195357.GA814864@ubuntu
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20201027201436.1597726-1-trix@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The intent here is to minimize the use of iio_buffer_set_attrs(). Since we
are planning to add support for multiple IIO buffers per IIO device, the
issue has to do with:
1. Accessing 'indio_dev->buffer' directly (as is done with
'iio_buffer_set_attrs(indio_dev->buffer, <attrs>)').
2. The way that the buffer attributes would get handled or expanded when
there are more buffers per IIO device. Current a sysfs kobj_type expands
into a 'device' object that expands into an 'iio_dev' object.
We will need to change this, so that the sysfs attributes for IIO
buffers expand into IIO buffers at some point.
Right now, the current IIO framework works fine for the
'1 IIO device == 1 IIO buffer' case (that is now).
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20200923130339.997902-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We have a couple of changes that apply to large sets of drivers, so
I have grouped those to keep this short.
There are a few late breaking fixes in here that can wait for the
merge window.
dt yaml conversions
-------------------
* adi,ad7768-1
* adi,ad7949
* aspeed,ast2400
* cosmic,10001-adc
* dlg,da9150-gpadc
* fsl,imx25-gcq
* fsl,imx7d-adc
* fsl,vf610
* holt,hi8435
* marvell,berlin2-adc
* motorola,cpcap-adc
* nuvoton,nau7802
* nuvoton,npcm750-adc
* nxp,lpc1850-adc
* nxp,lpc3220
* sprd,sc2720-adc
* st,stmpe-adc
* ti,adc12138
* ti,ads1015
* ti,ads7950
* ti,twl4030-madc
Features
--------
* adxrs290
- Add triggered buffer support and expose data ready signal as a possible
trigger. Includes updating bindings.
- Add debugfs hooks for register access.
* mlx90632
- Add a clear user interface to override the measured ambient temperature.
* vl53l0x
- Add IRQ support including dt bindings.
Cleanups and minor fixes
------------------------
(groups)
Replace mlock with local lock:
* adf4350
* exynos-adc
* fls-imx25-gcq
* stm32-dac
devm use to simplify probe error handling and remove functions.
* adis16201
* adis16203
* adis16209
* adis16240
* adis16136
* adis16260
* adis16400
* adis16460
* adis16480
* adis library - drop unused adis_setup_buffer_and_trigger()
of_match_ptr removal and incorrect ACPI binding removal
of_match_ptr() rarely makes sense in an IIO driver as space saving
is trivial and it breaks ACPI PRP0001 based instantiation.
Mostly this series is about removing examples that get copied into new
drivers.
* ad2s1200
* ad5272
* ad5446
* ad5592r
* ad5593r
* ad5703
* ak8974
* ak8975
* ams-iaq-core
* as3935
* atlas-sensor
* ds1803
* hdc100x
* htu21
* icp10100
* lmp91000
* pulsedlight
* max30102
* max5432
* max5481
* mcp4018
* mcp4131
* mcp4531
* mcp4725
* ms5611
* ms5637
* si7020
* sgp30
* ti-dac082s085
* ti-dac5571
* tmp007
* tsys01
* vz89x
* zpa2326
kernel-doc fixes
* iio-core
* ad7303
* ad7947
* adis16080
* adis16400
* iio_dummy_evgen
* sgp30
Fixes for buffer alignment when passed to iio_push_to_buffers_with_timestamp()
This is a long running effort. There are a few more drivers to come.
* inv_mpu6050
* itg3200
* si1145
* st_lsm6dsx
* ti-adc0832
* ti-adc12138
(not driver focused)
* MAINTAINERS
- Consolidate Analog Device IIO entries whilst removing Beniamin Bia.
- Remove Hartmut Knaack as a listed IIO maintainer as he hasn't been
active for a long time and people are getting intermitted bounces.
* Add __printf() markings to a few functions that were missing them.
* drop some rotted documentation from staging.
* rework buffer sysfs file creation (precursor to multiple buffer support)
(individual drivers)
* ad5592r
- Fix use of true for IIO_SHARED_BY_TYPE
- Tidy up locking and indentation.
* ad9467
- Improve error message on chip-id missmatch.
- Use more appropriate error value if chip-id not recognised.
* adis-library
- Simplify burst mode handling.
* adxrs290
- Make sure to switch device to standby mode during remove.
* as73211
- Increase measurement timeout as seems some devices are slower.
* bma180
- Fix use of true fo IIO_SHARED_BY_TYPE
* exynos_adc
- Update binding to require second interrut with touch screen.
- Update binding to not require syscon on S5Pv210
* hmc5843
- Fix use of true for IIO_SHARED_BY_TYPE
* inv_mpu6050
- Use regmap_noinc_read() for fifo reading.
* palmas_gpadc
- Use module_platform_driver() to remove boilerplate.
* meson-saradc
- style consistency fixes
* rockchip_saradc
- Allow compile testing with !ARM.
* st_lsm6dsx
- Changing scaling factor to use IIO_VAL_INT_PLUS_NANO to improve precision.
- Fix an issue with unchecked return value.
* stm32-adc
- Fix a missing return introduced in dev_err_probe() patch earlier in
cycle.
* sx9310
- Prefer async mode for probe as paticularly slow startup.
* vcnl4000
- Add missing interrupt property to dt binding.
-----BEGIN PGP SIGNATURE-----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=yrII
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of features and cleanups for IIO in 5.10
We have a couple of changes that apply to large sets of drivers, so
I have grouped those to keep this short.
There are a few late breaking fixes in here that can wait for the
merge window.
dt yaml conversions
-------------------
* adi,ad7768-1
* adi,ad7949
* aspeed,ast2400
* cosmic,10001-adc
* dlg,da9150-gpadc
* fsl,imx25-gcq
* fsl,imx7d-adc
* fsl,vf610
* holt,hi8435
* marvell,berlin2-adc
* motorola,cpcap-adc
* nuvoton,nau7802
* nuvoton,npcm750-adc
* nxp,lpc1850-adc
* nxp,lpc3220
* sprd,sc2720-adc
* st,stmpe-adc
* ti,adc12138
* ti,ads1015
* ti,ads7950
* ti,twl4030-madc
Features
--------
* adxrs290
- Add triggered buffer support and expose data ready signal as a possible
trigger. Includes updating bindings.
- Add debugfs hooks for register access.
* mlx90632
- Add a clear user interface to override the measured ambient temperature.
* vl53l0x
- Add IRQ support including dt bindings.
Cleanups and minor fixes
------------------------
(groups)
Replace mlock with local lock:
* adf4350
* exynos-adc
* fls-imx25-gcq
* stm32-dac
devm use to simplify probe error handling and remove functions.
* adis16201
* adis16203
* adis16209
* adis16240
* adis16136
* adis16260
* adis16400
* adis16460
* adis16480
* adis library - drop unused adis_setup_buffer_and_trigger()
of_match_ptr removal and incorrect ACPI binding removal
of_match_ptr() rarely makes sense in an IIO driver as space saving
is trivial and it breaks ACPI PRP0001 based instantiation.
Mostly this series is about removing examples that get copied into new
drivers.
* ad2s1200
* ad5272
* ad5446
* ad5592r
* ad5593r
* ad5703
* ak8974
* ak8975
* ams-iaq-core
* as3935
* atlas-sensor
* ds1803
* hdc100x
* htu21
* icp10100
* lmp91000
* pulsedlight
* max30102
* max5432
* max5481
* mcp4018
* mcp4131
* mcp4531
* mcp4725
* ms5611
* ms5637
* si7020
* sgp30
* ti-dac082s085
* ti-dac5571
* tmp007
* tsys01
* vz89x
* zpa2326
kernel-doc fixes
* iio-core
* ad7303
* ad7947
* adis16080
* adis16400
* iio_dummy_evgen
* sgp30
Fixes for buffer alignment when passed to iio_push_to_buffers_with_timestamp()
This is a long running effort. There are a few more drivers to come.
* inv_mpu6050
* itg3200
* si1145
* st_lsm6dsx
* ti-adc0832
* ti-adc12138
(not driver focused)
* MAINTAINERS
- Consolidate Analog Device IIO entries whilst removing Beniamin Bia.
- Remove Hartmut Knaack as a listed IIO maintainer as he hasn't been
active for a long time and people are getting intermitted bounces.
* Add __printf() markings to a few functions that were missing them.
* drop some rotted documentation from staging.
* rework buffer sysfs file creation (precursor to multiple buffer support)
(individual drivers)
* ad5592r
- Fix use of true for IIO_SHARED_BY_TYPE
- Tidy up locking and indentation.
* ad9467
- Improve error message on chip-id missmatch.
- Use more appropriate error value if chip-id not recognised.
* adis-library
- Simplify burst mode handling.
* adxrs290
- Make sure to switch device to standby mode during remove.
* as73211
- Increase measurement timeout as seems some devices are slower.
* bma180
- Fix use of true fo IIO_SHARED_BY_TYPE
* exynos_adc
- Update binding to require second interrut with touch screen.
- Update binding to not require syscon on S5Pv210
* hmc5843
- Fix use of true for IIO_SHARED_BY_TYPE
* inv_mpu6050
- Use regmap_noinc_read() for fifo reading.
* palmas_gpadc
- Use module_platform_driver() to remove boilerplate.
* meson-saradc
- style consistency fixes
* rockchip_saradc
- Allow compile testing with !ARM.
* st_lsm6dsx
- Changing scaling factor to use IIO_VAL_INT_PLUS_NANO to improve precision.
- Fix an issue with unchecked return value.
* stm32-adc
- Fix a missing return introduced in dev_err_probe() patch earlier in
cycle.
* sx9310
- Prefer async mode for probe as paticularly slow startup.
* vcnl4000
- Add missing interrupt property to dt binding.
* tag 'iio-for-5.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
dt-bindings: iio: vishay,vcnl4000: add interrupts property
iio:imu:inv_mpu6050: Use regmap_noinc_read for fifo reads.
iio:imu:inv_mpu6050 Fix dma and ts alignment and data leak issues.
iio:adc:ti-adc12138 Fix alignment issue with timestamp
iio:adc:ti-adc0832 Fix alignment issue with timestamp
iio:imu:st_lsm6dsx Fix alignment and data leak issues
iio:light:si1145: Fix timestamp alignment and prevent data leak.
iio:gyro:itg3200: Fix timestamp alignment and prevent data leak.
iio:imu:st_lsm6dsx: check st_lsm6dsx_shub_read_output return
iio: adc: exynos_adc: Replace indio_dev->mlock with own device lock
dt-bindings:iio:adc:holt,hi8435 yaml conversion
dt-bindings:iio:adc:adi,ad7768-1 yaml conversion
dt-bindings:iio:adc:adi,ad7949 yaml conversion
dt-bindings:iio:adc:dlg,da9150-gpadc yaml conversion
dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion
dt-bindings:iio:adc:nxp,lpc3220-adc yaml conversion
dt-bindings:iio:adc:nxp,lpc1850-adc yaml conversion
dt-bindings:iio:adc:fsl,imx25-gcq yaml conversion
dt-bindings:iio:adc:fsl,imx7d-adc yaml conversion
dt-bindings:iio:adc:ti,ads1015 yaml conversion
...
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 24 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable array in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak appart from previous readings.
Depending on the enabled channels, the location of the timestamp
can be at various aligned offsets through the buffer. As such we
any use of a structure to enforce this alignment would incorrectly
suggest a single location for the timestamp. Comments adjusted to
express this clearly in the code.
Fixes: ac45e57f15 ("iio: light: Add driver for Silabs si1132, si1141/2/3 and si1145/6/7 ambient light, uv index and proximity sensors")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200722155103.979802-9-jic23@kernel.org
Here are a number of Staging and IIO driver fixes for 5.9-rc5.
The majority of these are IIO driver fixes, to resolve a timestamp issue
that was recently found to affect a bunch of IIO drivers.
The other fixes in here are:
- small IIO driver fixes
- greybus driver fix
- counter driver fix (came in through the IIO fixes tree)
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX13YsQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk/2ACgwHmZh89xVW6VujiPJXNiBtLmrQAAoNbDaO45
+zODfdFDsPWhXBeQIINO
=AxzP
-----END PGP SIGNATURE-----
Merge tag 'staging-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are a number of staging and IIO driver fixes for 5.9-rc5.
The majority of these are IIO driver fixes, to resolve a timestamp
issue that was recently found to affect a bunch of IIO drivers.
The other fixes in here are:
- small IIO driver fixes
- greybus driver fix
- counter driver fix (came in through the IIO fixes tree)
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits)
iio: adc: mcp3422: fix locking on error path
iio: adc: mcp3422: fix locking scope
iio: adc: meson-saradc: Use the parent device to look up the calib data
iio:adc:max1118 Fix alignment of timestamp and data leak issues
iio:adc:ina2xx Fix timestamp alignment issue.
iio:adc:ti-adc084s021 Fix alignment and data leak issues.
iio:adc:ti-adc081c Fix alignment and data leak issues
iio:magnetometer:ak8975 Fix alignment and data leak issues.
iio:light:ltr501 Fix timestamp alignment issue.
iio:light:max44000 Fix timestamp alignment and prevent data leak.
iio:chemical:ccs811: Fix timestamp alignment and prevent data leak.
iio:proximity:mb1232: Fix timestamp alignment and prevent data leak.
iio:accel:mma7455: Fix timestamp alignment and prevent data leak.
iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak.
iio:accel:mma8452: Fix timestamp alignment and prevent data leak.
iio: accel: kxsd9: Fix alignment of local buffer.
iio: adc: rockchip_saradc: select IIO_TRIGGERED_BUFFER
iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set
counter: microchip-tcb-capture: check the correct variable
iio: cros_ec: Set Gyroscope default frequency to 25Hz
...
We found some sensors which are much slower (20% at room temperature)
than nominal. According to the data sheet, up to 27% is possible. Now I
add 33% to the nominal time out, hopefully this is enough.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Link: https://lore.kernel.org/r/20200909154439.10308-1-ceggers@arri.de
Fixes: 403e5586b5 ("iio: light: as73211: New driver")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200829064726.26268-15-krzk@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200829064726.26268-14-krzk@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor.
This driver has no built-in trigger. In order for making triggered
measurements, an external (software) trigger driver like
iio-trig-hrtimer or iio-trig-sysfs is required.
The sensor supports single and continuous measurement modes. The latter
is not used by design as this would require tight timing synchronization
between hardware and driver without much benefit.
Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf
Signed-off-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
Here we use a structure on the stack. The driver already did an
explicit memset so no data leak was possible.
Forced alignment of ts is not strictly necessary but probably makes
the code slightly less fragile.
Note there has been some rework in this driver of the years, so no
way this will apply cleanly all the way back.
Fixes: 2690be9051 ("iio: Add Lite-On ltr501 ambient light / proximity sensor driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv().
This data is allocated with kzalloc so no data can leak appart
from previous readings.
It is necessary to force the alignment of ts to avoid the padding
on x86_32 being different from 64 bit platorms (it alows for
4 bytes aligned 8 byte types.
Fixes: 06ad7ea10e ("max44000: Initial triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
The STK3311 chip has a variant called STK3311-X, which has a different
chip id of 0x12.
Add the chip id to the driver.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Kerneldoc expects attributes/parameters to be in '@*.: ' format.
Fixes the following W=1 kernel build warning(s):
drivers/iio/light/us5182d.c:457: warning: Function parameter or member 'data' not described in 'us5182d_update_dark_th'
drivers/iio/light/us5182d.c:457: warning: Function parameter or member 'index' not described in 'us5182d_update_dark_th'
drivers/iio/light/us5182d.c:479: warning: Function parameter or member 'data' not described in 'us5182d_apply_scale'
drivers/iio/light/us5182d.c:479: warning: Function parameter or member 'index' not described in 'us5182d_apply_scale'
Cc: Adriana Reus <adriana.reus@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
No attempt has been made to document any of the demoted functions here
Fixes the following W=1 kernel build warning(s):
drivers/iio/light/si1145.c:192: warning: Function parameter or member 'data' not described in '__si1145_command_reset'
drivers/iio/light/si1145.c:228: warning: Function parameter or member 'data' not described in 'si1145_command'
drivers/iio/light/si1145.c:228: warning: Function parameter or member 'cmd' not described in 'si1145_command'
drivers/iio/light/si1145.c:1186: warning: Function parameter or member 'trig' not described in 'si1145_trigger_set_state'
drivers/iio/light/si1145.c:1186: warning: Function parameter or member 'state' not described in 'si1145_trigger_set_state'
Cc: Chuhong Yuan <hslester96@gmail.com>
Cc: Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes the following W=1 kernel build warning(s):
drivers/iio/light/cm32181.c:107: warning: Function parameter or member 'dev' not described in 'cm32181_acpi_get_cpm'
drivers/iio/light/cm32181.c:107: warning: Function parameter or member 'obj_name' not described in 'cm32181_acpi_get_cpm'
drivers/iio/light/cm32181.c:107: warning: Function parameter or member 'values' not described in 'cm32181_acpi_get_cpm'
drivers/iio/light/cm32181.c:107: warning: Function parameter or member 'count' not described in 'cm32181_acpi_get_cpm'
Cc: Kevin Tsai <ktsai@capellamicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All devices using a triggered buffer need to attach and detach the trigger
to the device in order to properly work. Instead of doing this in each and
every driver by hand move this into the core.
At this point in time, all drivers should have been resolved to
attach/detach the poll-function in the same order.
This patch removes all explicit calls of iio_triggered_buffer_postenable()
& iio_triggered_buffer_predisable() in all drivers, since the core handles
now the pollfunc attach/detach.
The more peculiar change is for the 'at91-sama5d2_adc' driver, since it's
not immediately obvious that removing the hooks doesn't break anything.
Eugen was able to test on at91-sama5d2-adc driver, sama5d2-xplained board.
All seems to be fine.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com> #for at91-sama5d2-adc
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These were found by doing some shell magic:
------------
for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do
if grep 'parent =' $file | grep -v trig | grep -vq devm_; then
echo "$file -> $(grep "parent =" $file)"
fi
done
-----------
The output is bearable [after the semantic patch is applied].
There is a mix of trigger assignments with some iio device parent
assignments that are removed via this patch.
JC: A few more added via inspection of all parent =
statements in drivers/iio. Some of these may just have crossed with this
series, others were less obvious to scripting due to some cross
file / module boundary calls.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This assignment is the more peculiar as it assigns the parent of the
platform-device's device (i.e. pdev->dev.parent) as the IIO device's
parent.
Since the devm_iio_device_alloc() [now] assigns the device argument as the
default parent (and since this is the more common case), for cases
where the parent needs to be different, the iio_device_set_parent helper
should be used.
That makes things a bit more obvious about the new behavior of
devm_iio_device_alloc() and makes it clearer that iio_device_set_parent()
should be used.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch applies the semantic patch:
@@
expression I, P, SP;
@@
I = devm_iio_device_alloc(P, SP);
...
- I->dev.parent = P;
It updates 302 files and does 307 deletions.
This semantic patch also removes some comments like
'/* Establish that the iio_dev is a child of the i2c device */'
But this is is only done in case where the block is left empty.
The patch does not seem to cover all cases. It looks like in some cases a
different variable is used in some cases to assign the parent, but it
points to the same reference.
In other cases, the block covered by ... may be just too big to be covered
by the semantic patch.
However, this looks pretty good as well, as it does cover a big bulk of the
drivers that should remove the parent assignment.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
EC does not currently preserve range across sensor reinit.
If sensor is powered down at suspend, it will default to the EC default
range at resume, not the range set by the host.
Save range if modified, and apply at resume.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
stk3310_regmap_config is not modified and can be made const to allow the
compiler to put it in read-only memory.
Before:
text data bss dec hex filename
16027 5424 128 21579 544b drivers/iio/light/stk3310.o
After:
text data bss dec hex filename
16347 5104 128 21579 544b drivers/iio/light/stk3310.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We may want to get rid of the iio_priv_to_dev() helper. That's a bit
uncertain at this point. The reason is that we will hide some of the
members of the iio_dev structure (to prevent drivers from accessing them
directly), and that will also mean hiding the implementation of the
iio_priv_to_dev() helper inside the IIO core.
Hiding the implementation of iio_priv_to_dev() implies that some fast-paths
may not be fast anymore, so a general idea is to try to get rid of the
iio_priv_to_dev() altogether.
For this driver, removing iio_priv_to_dev() means keeping a reference
on the state struct.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We may want to get rid of the iio_priv_to_dev() helper. That's a bit
uncertain at this point. The reason is that we will hide some of the
members of the iio_dev structure (to prevent drivers from accessing them
directly), and that will also mean hiding the implementation of the
iio_priv_to_dev() helper inside the IIO core.
Hiding the implementation of iio_priv_to_dev() implies that some fast-paths
may not be fast anymore, so a general idea is to try to get rid of the
iio_priv_to_dev() altogether.
For this driver, it implies passing the IIO device on the i2c client
private data. The implementation of iio_priv() will not be affected by the
rework/hiding of iio_priv_to_dev().
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The light sensor needs the regulators to be enabled which means
the runtime PM needs to be on. This only happened when the
proximity part of the chip was enabled.
As fallout from this change, only report changes to the prox
state in the interrupt handler when it is explicitly enabled.
Fixes: 97d642e230 ("iio: light: Add a driver for Sharp GP2AP002x00F")
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Constify some data structs that are never changed. In order to do so,
also update a couple of functions that now need to accept pointers to
const struct instead of struct. While at it, update a few more functions
to accept pointers to const struct instead of pointers.
This allows the compiler to put more data in the code segment instead of
the data segment, as seen by the output of the file command:
Before:
text data bss dec hex filename
27080 8144 192 35416 8a58 drivers/iio/light/ltr501.o
After:
text data bss dec hex filename
27688 7536 192 35416 8a58 drivers/iio/light/ltr501.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix integartion time typo and while at it improve the comment with
the typo a bit in general.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On ACPI based systems the CPLM3218 ACPI device node describing the
CM3218[1] sensor typically will have some extra tables with register
init values for initializing the sensor and calibration info.
This is based on a newer version of cm32181.c, with a copyright of:
* Copyright (C) 2014 Capella Microsystems Inc.
* Author: Kevin Tsai <ktsai@capellamicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2, as published
* by the Free Software Foundation.
Which is floating around on the net in various places, but the changes
from this newer version never made it upstream.
This was tested on the following models: Acer Switch 10 SW5-012 (CM32181)
Asus T100TA (CM3218), Asus T100CHI (CM3218) and HP X2 10-n000nd (CM32181).
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make lux_per_bit and lux_per_bit_base_it settings stored in struct
cm32181_chip instead of a hardcoded (defined) values.
This is a preparation patch for reading some ACPI tables which specify
a device specific lux_per_bit value.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use units of 1/100000th for calibscale and lux_per_bit. The similar
cm3232 driver already uses 1/100000th as unit for calibscale.
This allows for higher-accuracy and makes it easier to add support
for getting device-specific calibscale and lux_per_bit values from
a device's ACPI tables, as the values in the ACPI tables also use
1/100000th units.
This units change means that our intermediate values in cm32181_get_lux()
may get quite big, change the type of the lux variable to a u64 to
deal with this.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is a preparation patch for reading some ACPI tables which give
init values for multiple registers.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some ACPI systems list 2 I2C resources for the CM3218 sensor. On these
systems the first I2cSerialBus ACPI-resource points to the SMBus Alert
Response Address (ARA, 0x0c) and the second I2cSerialBus ACPI-resource
points to the actual CM3218 sensor address:
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (SBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x000C, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2C3",
0x00, ResourceConsumer, , Exclusive,
)
I2cSerialBusV2 (0x0048, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2C3",
0x00, ResourceConsumer, , Exclusive,
)
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
{
0x00000033,
}
})
Return (SBUF) /* \_SB_.I2C3.ALSD._CRS.SBUF */
}
Detect this and take the following step to deal with it:
1. When a SMBus Alert capable sensor has an Alert asserted, it will
not respond on its actual I2C address. Read a byte from the ARA
to clear any pending Alerts.
2. Create a "dummy" client for the actual I2C address and
use that client to communicate with the sensor.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
3 small cleanups to cm32181_probe():
1. Do not log an error when we fail to allocate memory (as a general
rule drivers do not log errors for this as the kernel will already
have complained loudly that it could not alloc the mem).
2. Remove the i2c_set_clientdata() call, we never use i2c_get_clientdata()
or dev_get_drvdata() anywhere.
3. Add a dev helper variable and use it in various places instead of
&client->dev.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for the CM3218 which is an older version of the
CM32181.
This is based on a newer version of cm32181.c, with a copyright of:
* Copyright (C) 2014 Capella Microsystems Inc.
* Author: Kevin Tsai <ktsai@capellamicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2, as published
* by the Free Software Foundation.
Which is floating around on the net in various places, but the changes
from this newer version never made it upstream.
This was tested on an Asus T100TA and an Asus T100CHI, which both come
with the CM3218 variant of the light sensor.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These come from a newer version of cm32181.c, which is floating around
the net, with a copyright of:
* Copyright (C) 2014 Capella Microsystems Inc.
* Author: Kevin Tsai <ktsai@capellamicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2, as published
* by the Free Software Foundation.
Note that this removes the bogus CM32181_CMD_ALS_ENABLE define, there
is no enable bit, only a disable bit and enabled is the absence of
being disabled.
This is a preparation patch for adding support for the older
CM3218 model of the light sensor.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for ACPI enumeration, this has been tested on a HP
HP Pavilion x2 Detachable 10 (Bay Trail model).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Switch to the new style i2c-driver probe_new probe function and drop the
unnecessary i2c_device_id table (we do not have any old style board files
using this).
This is a preparation patch for adding ACPI binding support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The main intent here is to get rid of the iio_buffer_set_attrs() helper, or
at least rework it's usage a bit.
The problem with that helper is that it needs a pointer to the buffer,
which makes supporting multiple buffers per IIO device a bit more
cumbersome.
The hid_sensor_setup_trigger() is pretty much used in the same way:
- iio_triggered_buffer_setup() gets called before
- then hid_sensor_setup_trigger() and hid_sensor_setup_batch_mode() gets
called which may attach some fifo attributes
This change merges the 2 together under the hid_sensor_setup_trigger()
function. Only the &iio_pollfunc_store_time is passed to all devices, so
it's not even required to pass it explicitly outside of the common
hid_sensor_setup_trigger() function.
Moving the devm_iio_triggered_buffer_setup/cleanup() calls into the common
place code can help the rework of the buffer code, since it is in one
place.
One detail of the change is that there are 2 drivers that use
devm_iio_triggered_buffer_setup(). That function gets implicitly
replaced with iio_triggered_buffer_setup()/cleanup(), but since all drivers
call both hid_sensor_setup_trigger9) & hid_sensor_remove_trigger() trigger,
the iio_triggered_buffer_cleanup() piggy backs on the
hid_sensor_remove_trigger() call, which should cover the cleanup.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The VCNL4010 and VCNL4020 chips are able to raise interrupts on data ready.
Use it to provide triggered buffer support for proximity data.
Those two chips also provide ambient light data. However, they are sampled
at different rate than proximity data. As this is not handled by the IIO
framework for now, and the sample frequencies of ambient light data are
very low, do add buffer support for them.
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add sampling frequency support for proximity data on VCNL4010 and VCNL4020
chips.
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The VCNL4010 and VCNL4020 chips are able to raise interrupts on proximity
threshold events. Add support for threshold rising and falling events for
those two chips.
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
