Take one more free bit to indicate it's IDR vs. internal
usage, to be able to carve out some bits here for other
internal usage, other than IDR handling with a full ACK
SKB, that is.
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When receiving a multi-link association response, make sure to
track the BSS parameter change count for each link, including
the assoc link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.1799c164e7e9.I8e2c1f5eec6eec3fab525ae2dead9f6f099a2427@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are cases where keeping sdata locked for an operation. Add a
variant that does not take sdata lock to permit these usecases.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As a preparation to support Reconfiguration Multi Link
element, rename 'multi_link' and 'multi_link_len' fields
in 'struct ieee802_11_elems' to 'ml_basic' and 'ml_basic_len'.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.b11370d3066a.I34280ae3728597056a6a2f313063962206c0d581@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Doing this simplifies the code somewhat, as iteration over the
nontransmitted BSSs is not required anymore. Also, mac80211 should
not be iterating over the nontrans_list as it should only be accessed
while the bss_lock is held.
It also simplifies parsing of the IEs somewhat, as cfg80211 already
extracts the IEs and passes them to the callback.
Note that the only user left requiring parsing a specific BSS is the
association code if a beacon is required by the hardware.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.39ebfe2f9e59.Ia012b08e0feed8ec431b666888b459f6366f7bd1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For multi-link operation(MLO) TDLS management
frames need to be transmitted on a specific link.
The TDLS setup request will add BSSID along with
peer address and userspace will pass the link-id
based on BSSID value to the driver(or mac80211).
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.cb3d87c22812.Ia3d15ac4a9a182145bf2d418bcb3ddf4539cd0a7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some locking changes that will later otherwise
cause conflicts, so merge wireless into wireless-next to
avoid those.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As a preparation to support disabled/dormant links, add the
following function:
- ieee80211_vif_usable_links(): returns the bitmap of the links
that can be activated. Use this function in all the places that
the bitmap of the usable links is needed.
- ieee80211_vif_is_mld(): returns true iff the vif is an MLD.
Use this function in all the places where an indication that the
connection is a MLD is needed.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.86e3351da1fc.If6fe3a339fda2019f13f57ff768ecffb711b710a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When fragmenting the ML per STA profile, the element ID should be
IEEE80211_MLE_SUBELEM_PER_STA_PROFILE rather than WLAN_EID_FRAGMENT.
Change the helper function to take the to be used element ID and pass
the appropriate value for each of the fragmentation levels.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230611121219.9b5c793d904b.I7dad952bea8e555e2f3139fbd415d0cd2b3a08c3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move the beacon loss work that might cause a disconnect
and the CSA disconnect work to be wiphy work, so we hold
the wiphy lock for them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Channel switch obviously must be handled per link, and we
have a (potential) deadlock when canceling that work. Use
the new delayed wiphy work to handle this instead and get
rid of the explicit timer that way too.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
SMPS requests are per link, and currently there's a potential
deadlock with canceling. Use the new wiphy work to handle SMPS
instead, so that the cancel cannot deadlock.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We'll need this later to convert other works that might
be cancelled from here, so convert this one first.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a number of upcoming things in both the stack and
drivers that would otherwise conflict, so merge wireless to
wireless-next to be able to avoid those conflicts.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we have a reconfig failure in the driver, then we need
to shut down the network interface(s) at the network stack
level through cfg80211, which can result in a lot of those
"Failed check-sdata-in-driver check, ..." warnings, since
interfaces are considered to not be in the driver when the
reconfiguration fails, but we still need to go through all
the shutdown flow.
Avoid many of these warnings by storing the fact that the
stack experienced a reconfiguration failure and not doing
the warning in that case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.3750c4ae6e76.I9e80d6026f59263c008a1a68f6cd6891ca0b93b0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a chanctx is reserved for a new vif and we recalculate
the minimal definition for it, we need to consider the new
interface it's being reserved for before we assign it, so it
can be used directly with the correct min channel width.
Fix the code to - optionally - consider that, and use that
option just before doing the reassignment.
Also, when considering channel context reservations, we
should only consider the one link we're currently working with.
Change the boolean argument to a link pointer to do that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-4-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It can be really hard to analyse or debug why packets are
going missing in mac80211, so add the needed infrastructure
to use use the new per-subsystem drop reasons.
We actually use two drop reason subsystems here because of
the different handling of frames that are dropped but still
go to monitor for old versions of hostapd, and those that
are just completely unusable (e.g. crypto failed.)
Annotate a few reasons here just to illustrate this, we'll
need to go through and annotate more of them later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to AP beacon, this enables the basic mesh EHT mode, including
EHT operation IE and the fixed field of EHT operation information IE.
As for the optional part (i.e. preamble puncturing bitmap) will be
added in future patch.
Tested-by: Lian Chen <lian.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://lore.kernel.org/r/1e0ddb9001312451c3e99c4eed2072caf8075f61.1679935259.git.ryder.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a few merge conflicts due to overlapping
fixes and changes, merge wireless/main to fix them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Generate EMA beacons, each including MBSSID and RNR elements at a given
index. If number of stored RNR elements is more than the number of
MBSSID elements then add those in every EMA beacon.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20230323113801.6903-3-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add APIs to generate an array of beacons for an EMA AP (enhanced
multiple BSSID advertisements), each including a single MBSSID element.
EMA profile periodicity equals the count of elements.
- ieee80211_beacon_get_template_ema_list() - Generate and return all
EMA beacon templates. Drivers must call ieee80211_beacon_free_ema_list()
to free the memory. No change in the prototype for the existing API,
ieee80211_beacon_get_template(), which should be used for non-EMA AP.
- ieee80211_beacon_get_template_ema_index() - Generate a beacon which
includes the multiple BSSID element at the given index. Drivers can use
this function in a loop until NULL is returned which indicates end of
available MBSSID elements.
- ieee80211_beacon_free_ema_list() - free the memory allocated for the
list of EMA beacon templates.
Modify existing functions ieee80211_beacon_get_ap(),
ieee80211_get_mbssid_beacon_len() and ieee80211_beacon_add_mbssid()
to accept a new parameter for EMA index.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20221206005040.3177-2-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Significantly reduces mesh forwarding path CPU usage and enables the
direct use of iTXQ.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://lore.kernel.org/r/20230314095956.62085-5-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Previously, fast xmit only worked on interface types where initially a
sta lookup is performed, and a cached header can be attached to the sta,
requiring only some fields to be updated at runtime.
This technique is not directly applicable for a mesh device type due
to the dynamic nature of the topology and protocol. There are more
addresses that need to be filled, and there is an extra header with a
dynamic length based on the addressing mode.
Change the code to cache entries contain a copy of the mesh subframe header +
bridge tunnel header, as well as an embedded struct ieee80211_fast_tx, which
contains the information for building the 802.11 header.
Add a mesh specific early fast xmit call, which looks up a cached entry and
adds only the mesh subframe header, before passing it over to the generic
fast xmit code.
To ensure the changes in network are reflected in these cached headers,
flush affected cached entries on path changes, as well as other conditions
that currently trigger a fast xmit check in other modes (key changes etc.)
This code is loosely based on a previous implementation by:
Sriram R <quic_srirrama@quicinc.com>
Cc: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230314095956.62085-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since the sequence number is shared across different tx queues, it needs
to be atomic in order to avoid accidental duplicate assignment
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230314095956.62085-2-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On newer MediaTek SoCs (e.g. MT7986), WLAN->WLAN or WLAN->Ethernet flows can
be offloaded by the SoC. In order to support that, the .ndo_setup_tc op is
needed.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230321091248.30947-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_handle_wake_tx_queue must not run concurrent multiple times.
It calls ieee80211_txq_schedule_start() and the drivers migrated to iTXQ
do not expect overlapping drv_tx() calls.
This fixes 'c850e31f79f0 ("wifi: mac80211: add internal handler for
wake_tx_queue")', which introduced ieee80211_handle_wake_tx_queue.
Drivers started to use it with 'a790cc3a4fad ("wifi: mac80211: add
wake_tx_queue callback to drivers")'.
But only after fixing an independent bug with
'4444bc2116ae ("wifi: mac80211: Proper mark iTXQs for resumption")'
problematic concurrent calls really happened and exposed the initial
issue.
Fixes: c850e31f79 ("wifi: mac80211: add internal handler for wake_tx_queue")
Reported-by: Thomas Mann <rauchwolke@gmx.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217119
Link: https://lore.kernel.org/r/b8efebc6-4399-d0b8-b2a0-66843314616b@leemhuis.info/
Link: https://lore.kernel.org/r/b7445607128a6b9ed7c17fcdcf3679bfaf4aaea.camel@sipsolutions.net>
CC: <stable@vger.kernel.org>
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20230314211122.111688-1-alexander@wetzel-home.de
[add missing spin_lock_init() noticed by Felix]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This adds the infrastructure to have netdev specific per-link data both
for mac80211 and the driver in debugfs. For the driver, a new callback
is added which is only used if MLO is supported.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.fb4c947e4df8.I69b3516ddf4c8a7501b395f652d6063444ecad63@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now that all drivers use iTXQ, it does not make sense to check to drop
tx forwarding packets when the driver has stopped the queues.
fq_codel will take care of dropping packets when the queues fill up
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230213100855.34315-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Handle the Puncturing info received from the AP in the
EHT Operation element in beacons.
If the info is invalid:
- during association: disable EHT connection for the AP
- after association: disconnect
This commit includes many (internal) bugfixes and spec
updates various people.
Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://lore.kernel.org/r/20230127123930.4fbc74582331.I3547481d49f958389f59dfeba3fcc75e72b0aa6e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move color collision report in a dedicated delayed work and do not run
it in interrupt context in order to rate-limit the number of events
reported to userspace. Moreover grab wdev mutex in
ieee80211_color_collision_detection_work routine since it is required
by cfg80211_obss_color_collision_notify().
Tested-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Fixes: 5f9404abdf ("mac80211: add support for BSS color change")
Link: https://lore.kernel.org/r/3f6cf60c892ad40c1cca4a55d62b1224ef1c6ce9.1674644379.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a running wake_tx_queue() call is aborted due to a hw queue stop
the corresponding iTXQ is not always correctly marked for resumption:
wake_tx_push_queue() can stops the queue run without setting
@IEEE80211_TXQ_STOP_NETIF_TX.
Without the @IEEE80211_TXQ_STOP_NETIF_TX flag __ieee80211_wake_txqs()
will not schedule a new queue run and remaining frames in the queue get
stuck till another frame is queued to it.
Fix the issue for all drivers - also the ones with custom wake_tx_queue
callbacks - by moving the logic into ieee80211_tx_dequeue() and drop the
redundant @txqs_stopped.
@IEEE80211_TXQ_STOP_NETIF_TX is also renamed to @IEEE80211_TXQ_DIRTY to
better describe the flag.
Fixes: c850e31f79 ("wifi: mac80211: add internal handler for wake_tx_queue")
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20221230121850.218810-1-alexander@wetzel-home.de
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All drivers are now using mac80211 internal queues (iTXQs).
Drop mac80211 internal support for the old push path.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Ensure that the link ID matches in auth/assoc continuation,
otherwise we need to reset all the data.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case the AP returned a non success status for one of the links,
do not activate the link.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When processing an association response frame for a Multi-Link
connection, extract the per station profile for each additional
link, and use it for parsing the link elements.
As the Multi-Link element might be fragmented, add support for
reassembling a fragmented element. To simplify memory management
logic, extend 'struct ieee802_11_elems' to hold a scratch buffer,
which is used for the defragmentation. Once an element is
reconstructed in the scratch area, point the corresponding element
pointer to it. Currently only defragmentation of Multi-Link element
and the contained per-STA profile subelement is supported.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement an API function and debugfs file to switch
active links.
Also provide an async version of the API so drivers
can call it in arbitrary contexts, e.g. while in the
authorized callback.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We probably should've done that originally, we already have
about 300 lines of code there, and will add more. Move all
the link code we wrote to a new file.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We don't need the sdata argument, and it doesn't make any
sense for a direct conversion from one value to another,
so just remove the argument
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we add 6 GHz capability in MLO, we cannot use the SMPS
mode from the deflink. Pass it separately instead since on
a second link we don't even have a link data struct yet.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
