Core:
- Yet another round of improvements to make the clocksource watchdog
more robust:
- Relax the clocksource-watchdog skew criteria to match the NTP
criteria.
- Temporarily skip the watchdog when high memory latencies are
detected which can lead to false-positives.
- Provide an option to enable TSC skew detection even on systems
where TSC is marked as reliable.
Sigh!
- Initialize the restart block in the nanosleep syscalls to be directed
to the no restart function instead of doing a partial setup on entry.
This prevents an erroneous restart_syscall() invocation from
corrupting user space data. While such a situation is clearly a user
space bug, preventing this is a correctness issue and caters to the
least suprise principle.
- Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout()
to align it with the nanosleep semantics.
Drivers:
- The obligatory new driver bindings for Mediatek, Rockchip and RISC-V
variants.
- Add support for the C3STOP misfeature to the RISC-V timer to handle
the case where the timer stops in deeper idle state.
- Set up a static key in the RISC-V timer correctly before first use.
- The usual small improvements and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=I67j
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timekeeping, timers and clockevent/source drivers:
Core:
- Yet another round of improvements to make the clocksource watchdog
more robust:
- Relax the clocksource-watchdog skew criteria to match the NTP
criteria.
- Temporarily skip the watchdog when high memory latencies are
detected which can lead to false-positives.
- Provide an option to enable TSC skew detection even on systems
where TSC is marked as reliable.
Sigh!
- Initialize the restart block in the nanosleep syscalls to be
directed to the no restart function instead of doing a partial
setup on entry.
This prevents an erroneous restart_syscall() invocation from
corrupting user space data. While such a situation is clearly a
user space bug, preventing this is a correctness issue and caters
to the least suprise principle.
- Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout()
to align it with the nanosleep semantics.
Drivers:
- The obligatory new driver bindings for Mediatek, Rockchip and
RISC-V variants.
- Add support for the C3STOP misfeature to the RISC-V timer to handle
the case where the timer stops in deeper idle state.
- Set up a static key in the RISC-V timer correctly before first use.
- The usual small improvements and fixes all over the place"
* tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/timer-sun4i: Add CLOCK_EVT_FEAT_DYNIRQ
clocksource/drivers/em_sti: Mark driver as non-removable
clocksource/drivers/sh_tmu: Mark driver as non-removable
clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use
clocksource/drivers/timer-microchip-pit64b: Add delay timer
clocksource/drivers/timer-microchip-pit64b: Select driver only on ARM
dt-bindings: timer: sifive,clint: add comaptibles for T-Head's C9xx
dt-bindings: timer: mediatek,mtk-timer: add MT8365
clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback
clocksource/drivers/sh_cmt: Mark driver as non-removable
clocksource/drivers/timer-microchip-pit64b: Drop obsolete dependency on COMPILE_TEST
clocksource/drivers/riscv: Increase the clock source rating
clocksource/drivers/timer-riscv: Set CLOCK_EVT_FEAT_C3STOP based on DT
dt-bindings: timer: Add bindings for the RISC-V timer device
RISC-V: time: initialize hrtimer based broadcast clock event device
dt-bindings: timer: rk-timer: Add rktimer for rv1126
time/debug: Fix memory leak with using debugfs_lookup()
clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested
posix-timers: Use atomic64_try_cmpxchg() in __update_gt_cputime()
clocksource: Verify HPET and PMTMR when TSC unverified
...
This pull request contains the following:
o Improvements to clocksource-watchdog console messages.
o Loosening of the clocksource-watchdog skew criteria to match
those of NTP (500 parts per million, relaxed from 400 parts
per million). If it is good enough for NTP, it is good enough
for the clocksource watchdog.
o Suspend clocksource-watchdog checking temporarily when high
memory latencies are detected. This avoids the false-positive
clock-skew events that have been seen on production systems
running memory-intensive workloads.
o On systems where the TSC is deemed trustworthy, use it as the
watchdog timesource, but only when specifically requested using
the tsc=watchdog kernel boot parameter. This permits clock-skew
events to be detected, but avoids forcing workloads to use the
slow HPET and ACPI PM timers. These last two timers are slow
enough to cause systems to be needlessly marked bad on the one
hand, and real skew does sometimes happen on production systems
running production workloads on the other. And sometimes it is
the fault of the TSC, or at least of the firmware that told the
kernel to program the TSC with the wrong frequency.
o Add a tsc=revalidate kernel boot parameter to allow the kernel
to diagnose cases where the TSC hardware works fine, but was told
by firmware to tick at the wrong frequency. Such cases are rare,
but they really have happened on production systems.
-----BEGIN PGP SIGNATURE-----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=OWY2
-----END PGP SIGNATURE-----
Merge tag 'clocksource.2023.02.06b' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into timers/core
Pull clocksource watchdog changes from Paul McKenney:
o Improvements to clocksource-watchdog console messages.
o Loosening of the clocksource-watchdog skew criteria to match
those of NTP (500 parts per million, relaxed from 400 parts
per million). If it is good enough for NTP, it is good enough
for the clocksource watchdog.
o Suspend clocksource-watchdog checking temporarily when high
memory latencies are detected. This avoids the false-positive
clock-skew events that have been seen on production systems
running memory-intensive workloads.
o On systems where the TSC is deemed trustworthy, use it as the
watchdog timesource, but only when specifically requested using
the tsc=watchdog kernel boot parameter. This permits clock-skew
events to be detected, but avoids forcing workloads to use the
slow HPET and ACPI PM timers. These last two timers are slow
enough to cause systems to be needlessly marked bad on the one
hand, and real skew does sometimes happen on production systems
running production workloads on the other. And sometimes it is
the fault of the TSC, or at least of the firmware that told the
kernel to program the TSC with the wrong frequency.
o Add a tsc=revalidate kernel boot parameter to allow the kernel
to diagnose cases where the TSC hardware works fine, but was told
by firmware to tick at the wrong frequency. Such cases are rare,
but they really have happened on production systems.
Link: https://lore.kernel.org/r/20230210193640.GA3325193@paulmck-ThinkPad-P17-Gen-1
Add CLOCK_EVT_FEAT_DYNIRQ to allow the IRQ could be runtime set affinity
to the cores that needs wake up, otherwise saying core0 has to send
IPI to wakeup core1. With CLOCK_EVT_FEAT_DYNIRQ set, when broadcast
timer could wake up the cores, IPI is not needed.
After enabling this feature, especially the scene where cpuidle is
enabled can benefit.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230209040239.24710-1-frank.li@vivo.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind a em_sti device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230207193010.469495-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind a sh_tmu device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230207193614.472060-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
A static key is used to select between SBI and Sstc timer usage in
riscv_clock_next_event(), but currently the direction is resolved
after cpuhp_setup_state() is called (which sets the next event). The
first event will therefore fall through the sbi_set_timer() path; this
breaks Sstc-only systems. So, apply the jump patching before first
use.
Fixes: 9f7a8ff639 ("RISC-V: Prefer sstc extension if available")
Signed-off-by: Matt Evans <mev@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/CDDAB2D0-264E-42F3-8E31-BA210BEB8EC1@rivosinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Microchip PIT64B is currently available on ARM based devices. Thus
select it only for ARM. This allows implementing delay timer.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230203130537.1921608-2-claudiu.beznea@microchip.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Having a clocksource_arch_init() callback always sets vdso_clock_mode to
VDSO_CLOCKMODE_ARCHTIMER if GENERIC_GETTIMEOFDAY is enabled, this is
required for the riscv-timer.
This works for platforms where just riscv-timer clocksource is present.
On platforms where other clock sources are available we want them to
register with vdso_clock_mode set to VDSO_CLOCKMODE_NONE.
On the Renesas RZ/Five SoC OSTM block can be used as clocksource [0], to
avoid multiple clock sources being registered as VDSO_CLOCKMODE_ARCHTIMER
move setting of vdso_clock_mode in the riscv-timer driver instead of doing
this in clocksource_arch_init() callback as done similarly for ARM/64
architecture.
[0] drivers/clocksource/renesas-ostm.c
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221229224601.103851-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind a sh_cmt device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230123220221.48164-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230121182911.4e47a5ff@endymion.delvare
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
RISC-V provides an architectural clock source via the time CSR. This
clock source exposes a 64-bit counter synchronized across all CPUs.
Because it is accessed using a CSR, it is much more efficient to read
than MMIO clock sources. For example, on the Allwinner D1, reading the
sun4i timer in a loop takes 131 cycles/iteration, while reading the
RISC-V time CSR takes only 5 cycles/iteration.
Adjust the RISC-V clock source rating so it is preferred over the
various platform-specific MMIO clock sources.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20221228004444.61568-1-samuel@sholland.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
We should set CLOCK_EVT_FEAT_C3STOP for a clock_event_device only
when riscv,timer-cannot-wake-cpu DT property is present in the RISC-V
timer DT node.
This way CLOCK_EVT_FEAT_C3STOP feature is set for clock_event_device
based on RISC-V platform capabilities rather than having it set for
all RISC-V platforms.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230103141102.772228-4-apatel@ventanamicro.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
On systems with two or fewer sockets, when the boot CPU has CONSTANT_TSC,
NONSTOP_TSC, and TSC_ADJUST, clocksource watchdog verification of the
TSC is disabled. This works well much of the time, but there is the
occasional production-level system that meets all of these criteria, but
which still has a TSC that skews significantly from atomic-clock time.
This is usually attributed to a firmware or hardware fault. Yes, the
various NTP daemons do express their opinions of userspace-to-atomic-clock
time skew, but they put them in various places, depending on the daemon
and distro in question. It would therefore be good for the kernel to
have some clue that there is a problem.
The old behavior of marking the TSC unstable is a non-starter because a
great many workloads simply cannot tolerate the overheads and latencies
of the various non-TSC clocksources. In addition, NTP-corrected systems
sometimes can tolerate significant kernel-space time skew as long as
the userspace time sources are within epsilon of atomic-clock time.
Therefore, when watchdog verification of TSC is disabled, enable it for
HPET and PMTMR (AKA ACPI PM timer). This provides the needed in-kernel
time-skew diagnostic without degrading the system's performance.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Waiman Long <longman@redhat.com>
Cc: <x86@kernel.org>
Tested-by: Feng Tang <feng.tang@intel.com>
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
similar symbols that are no longer available with the platform gone,
though the drivers themselves are still used on newer platforms,
so remove these hacks.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and the
work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown
timer. Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync() should
be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding rearm
attempts silently. A warning for the case that a rearm attempt of a
shutdown timer is detected would not be really helpful because it's
entirely unclear how it should be acted upon. The only way to address
such a case is to add 'if (in_shutdown)' conditionals all over the
place. This is error prone and in most cases of teardown not required
all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
- Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=JlDe
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and drivers:
Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and
the work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown timer.
Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync()
should be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding
rearm attempts silently.
A warning for the case that a rearm attempt of a shutdown timer is
detected would not be really helpful because it's entirely unclear
how it should be acted upon. The only way to address such a case is
to add 'if (in_shutdown)' conditionals all over the place. This is
error prone and in most cases of teardown not required all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place"
* tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
dt-bindings: timer: renesas,cmt: Add r8a779g0 CMT support
dt-bindings: timer: renesas,tmu: Add r8a779g0 support
clocksource/drivers/arm_arch_timer: Use kstrtobool() instead of strtobool()
clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
clocksource/drivers/timer-ti-dm: Clear settings on probe and free
clocksource/drivers/timer-ti-dm: Make timer_get_irq static
clocksource/drivers/timer-ti-dm: Fix warning for omap_timer_match
clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error
clocksource/drivers/timer-npcm7xx: Enable timer 1 clock before use
dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
dt-bindings: timer: rockchip: Add rockchip,rk3128-timer
clockevents: Repair kernel-doc for clockevent_delta2ns()
clocksource/drivers/ingenic-ost: Define pm functions properly in platform_driver struct
clocksource/drivers/sh_cmt: Access registers according to spec
vdso/timens: Refactor copy-pasted find_timens_vvar_page() helper into one copy
Bluetooth: hci_qca: Fix the teardown problem for real
timers: Update the documentation to reflect on the new timer_shutdown() API
timers: Provide timer_shutdown[_sync]()
timers: Add shutdown mechanism to the internal functions
timers: Split [try_to_]del_timer[_sync]() to prepare for shutdown mode
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmORzR4THHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXkqCCACFwHz04iepLE7R8ZZ6BVUhD6uzfzDo
s1j7ozOUGUe3vI6q0DElHWVQZgzIzLypVsfWkZToe6jeOU6R48b0tZSFyJCUNwGM
ogmS7N8fBdHfY9SBFoUPoziBifXpf3kq4hhX/w+1Lge9CN5Ywc4KjuJb91EAInbs
lm47O4KQY8w8A7BbPBHYBueUVWLvgwPRPOS032zqxN1787m2tCxpqkfnImK39kh6
IsBBIZfYsok0H5wldhZXnsARpEOeFF6BoFBXpFPlmnbv2VcK2AfZgTYdA3ESyEgd
NyOFDfh6BO07gTR1xCH6gvOpkHwx6xKAkjE36RymdhXS6fhRCRsfahVB
=m78g
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20221208' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Drop unregister syscore from hyperv_cleanup to avoid hang (Gaurav
Kohli)
- Clean up panic path for Hyper-V framebuffer (Guilherme G. Piccoli)
- Allow IRQ remapping to work without x2apic (Nuno Das Neves)
- Fix comments (Olaf Hering)
- Expand hv_vp_assist_page definition (Saurabh Sengar)
- Improvement to page reporting (Shradha Gupta)
- Make sure TSC clocksource works when Linux runs as the root partition
(Stanislav Kinsburskiy)
* tag 'hyperv-next-signed-20221208' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Remove unregister syscore call from Hyper-V cleanup
iommu/hyper-v: Allow hyperv irq remapping without x2apic
clocksource: hyper-v: Add TSC page support for root partition
clocksource: hyper-v: Use TSC PFN getter to map vvar page
clocksource: hyper-v: Introduce TSC PFN getter
clocksource: hyper-v: Introduce a pointer to TSC page
x86/hyperv: Expand definition of struct hv_vp_assist_page
PCI: hv: update comment in x86 specific hv_arch_irq_unmask
hv: fix comment typo in vmbus_channel/low_latency
drivers: hv, hyperv_fb: Untangle and refactor Hyper-V panic notifiers
video: hyperv_fb: Avoid taking busy spinlock on panic path
hv_balloon: Add support for configurable order free page reporting
mm/page_reporting: Add checks for page_reporting_order param
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/f430bb12e12eb225ab1206db0be64b755ddafbdc.1667336095.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
If clk_get_rate() fails which is called after clk_prepare_enable(),
clk_disable_unprepare() need be called in error path to disable the
clock in dmtimer_systimer_init_clock().
Fixes: 52762fbd1c ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221029114427.946520-1-yangyingliang@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Clear the timer control register on driver probe and omap_dm_timer_free().
Otherwise we assume the consumer driver takes care of properly
initializing timer interrupts on PWM driver module reload for example.
AFAIK this is not currently needed as a fix, I just happened to run into
this while cleaning up things.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221028103813.40783-1-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
We can make timer_get_irq() static as noted by Janusz. It is only used by
omap_rproc_get_timer_irq() via platform data.
Reported-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221028103604.40385-1-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
We can now get a warning for 'omap_timer_match' defined but not used.
Let's fix this by dropping of_match_ptr for omap_timer_match.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: ab0bbef3ae ("clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221028103526.40319-1-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
The TVAL register is 32 bit signed. Thus only the lower 31 bits are
available to specify when an interrupt is to occur at some time in the
near future. Attempting to specify a larger interval with TVAL results
in a negative time delta which means the timer fires immediately upon
being programmed, rather than firing at that expected future time.
The solution is for Linux to declare that TVAL is a 31 bit register rather
than give its true size of 32 bits. This prevents Linux from programming
TVAL with a too-large value. Note that, prior to 5.16, this little trick
was the standard way to handle TVAL in Linux, so there is nothing new
happening here on that front.
The softlockup detector hides the issue, because it keeps generating
short timer deadlines that are within the scope of the broken timer.
Disable it, and you start using NO_HZ with much longer timer deadlines,
which turns into an interrupt flood:
11: 1124855130 949168462 758009394 76417474 104782230 30210281
310890 1734323687 GICv2 29 Level arch_timer
And "much longer" isn't that long: it takes less than 43s to underflow
TVAL at 50MHz (the frequency of the counter on XGene-1).
Some comments on the v1 version of this patch by Marc Zyngier:
XGene implements CVAL (a 64bit comparator) in terms of TVAL (a countdown
register) instead of the other way around. TVAL being a 32bit register,
the width of the counter should equally be 32. However, TVAL is a
*signed* value, and keeps counting down in the negative range once the
timer fires.
It means that any TVAL value with bit 31 set will fire immediately,
as it cannot be distinguished from an already expired timer. Reducing
the timer range back to a paltry 31 bits papers over the issue.
Another problem cannot be fixed though, which is that the timer interrupt
*must* be handled within the negative countdown period, or the interrupt
will be lost (TVAL will rollover to a positive value, indicative of a
new timer deadline).
Cc: stable@vger.kernel.org # 5.16+
Fixes: 012f188504 ("clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations")
Signed-off-by: Joe Korty <joe.korty@concurrent-rt.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
[maz: revamped the commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221024165422.GA51107@zipoli.concurrent-rt.com
Link: https://lore.kernel.org/r/20221121145343.896018-1-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
In the WPCM450 SoC, the clocks for each timer can be gated individually.
To prevent the timer 1 clock from being gated, enable it explicitly.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20221104161850.2889894-3-j.neuschaefer@gmx.net
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
This reverts commit 232ccac1bd.
On the subject of suspend, the RISC-V SBI spec states:
This does not cover whether any given events actually reach the hart or
not, just what the hart will do if it receives an event. On PolarFire
SoC, and potentially other SiFive based implementations, events from the
RISC-V timer do reach a hart during suspend. This is not the case for the
implementation on the Allwinner D1 - there timer events are not received
during suspend.
To fix this, the CLOCK_EVT_FEAT_C3STOP (mis)feature was enabled for the
timer driver - but this has broken both RCU stall detection and timers
generally on PolarFire SoC and potentially other SiFive based
implementations.
If an AXI read to the PCIe controller on PolarFire SoC times out, the
system will stall, however, with CLOCK_EVT_FEAT_C3STOP active, the system
just locks up without RCU stalling:
io scheduler mq-deadline registered
io scheduler kyber registered
microchip-pcie 2000000000.pcie: host bridge /soc/pcie@2000000000 ranges:
microchip-pcie 2000000000.pcie: MEM 0x2008000000..0x2087ffffff -> 0x0008000000
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: axi read request error
microchip-pcie 2000000000.pcie: axi read timeout
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
Freeing initrd memory: 7332K
Similarly issues were reported with clock_nanosleep() - with a test app
that sleeps each cpu for 6, 5, 4, 3 ms respectively, HZ=250 & the blamed
commit in place, the sleep times are rounded up to the next jiffy:
== CPU: 1 == == CPU: 2 == == CPU: 3 == == CPU: 4 ==
Mean: 7.974992 Mean: 7.976534 Mean: 7.962591 Mean: 3.952179
Std Dev: 0.154374 Std Dev: 0.156082 Std Dev: 0.171018 Std Dev: 0.076193
Hi: 9.472000 Hi: 10.495000 Hi: 8.864000 Hi: 4.736000
Lo: 6.087000 Lo: 6.380000 Lo: 4.872000 Lo: 3.403000
Samples: 521 Samples: 521 Samples: 521 Samples: 521
Fortunately, the D1 has a second timer, which is "currently used in
preference to the RISC-V/SBI timer driver" so a revert here does not
hurt operation of D1 in its current form.
Ultimately, a DeviceTree property (or node) will be added to encode the
behaviour of the timers, but until then revert the addition of
CLOCK_EVT_FEAT_C3STOP.
Fixes: 232ccac1bd ("clocksource/drivers/riscv: Events are stopped during CPU suspend")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/linux-riscv/YzYTNQRxLr7Q9JR0@spud/
Link: https://github.com/riscv-non-isa/riscv-sbi-doc/issues/98/
Link: https://lore.kernel.org/linux-riscv/bf6d3b1f-f703-4a25-833e-972a44a04114@sholland.org/
Link: https://lore.kernel.org/r/20221122121620.3522431-1-conor.dooley@microchip.com
Commit ca7b72b5a5 ("clocksource: Add driver for the Ingenic JZ47xx OST")
adds the struct platform_driver ingenic_ost_driver, with the definition of
pm functions under the non-existing config PM_SUSPEND, which means the
intended pm functions were never actually included in any build.
As the only callbacks are .suspend_noirq and .resume_noirq, we can assume
that it is intended to be CONFIG_PM_SLEEP.
Since commit 1a3c7bb088 ("PM: core: Add new *_PM_OPS macros, deprecate
old ones"), the default pattern for platform_driver definitions
conditional for CONFIG_PM_SLEEP is to use pm_sleep_ptr().
As __maybe_unused annotations on the dev_pm_ops structure and its callbacks
are not needed anymore, remove these as well.
Suggested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221123083159.22821-1-lukas.bulwahn@gmail.com
Documentation for most CMTs say that it takes two input clocks before
changes propagate to the timer. This is especially relevant when the timer
is stopped to change further settings.
Implement the delays according to the spec. To avoid unnecessary delays in
atomic mode, also check if the to-be-written value actually differs.
CMCNT is a bit special because testing showed that it requires 3 cycles to
propagate, which affects all CMTs. Also, the WRFLAG needs to be checked
before writing. This fixes "cannot clear CMCNT" messages which occur often
on R-Car Gen4 SoCs, but only very rarely on older SoCs for some reason.
Fixes: 81b3b27110 ("clocksource: sh_cmt: Add support for multiple channels per device")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130210609.7718-1-wsa+renesas@sang-engineering.com
Microsoft Hypervisor root partition has to map the TSC page specified
by the hypervisor, instead of providing the page to the hypervisor like
it's done in the guest partitions.
However, it's too early to map the page when the clock is initialized, so, the
actual mapping is happening later.
Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: x86@kernel.org
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Daniel Lezcano <daniel.lezcano@linaro.org>
CC: linux-hyperv@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Link: https://lore.kernel.org/r/166759443644.385891.15921594265843430260.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Instead of converting the virtual address to physical directly.
This is a precursor patch for the upcoming support for TSC page mapping into
Microsoft Hypervisor root partition, where TSC PFN will be defined by the
hypervisor and thus can't be obtained by linear translation of the physical
address.
Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>
CC: Andy Lutomirski <luto@kernel.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: x86@kernel.org
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: Daniel Lezcano <daniel.lezcano@linaro.org>
CC: linux-kernel@vger.kernel.org
CC: linux-hyperv@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Link: https://lore.kernel.org/r/166749833939.218190.14095015146003109462.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net
Signed-off-by: Wei Liu <wei.liu@kernel.org>
And rework the code to use it instead of the physical address, which isn't
required by itself.
This is a cleanup and precursor patch for upcoming support for TSC page
mapping into Microsoft Hypervisor root partition, where TSC PFN will be
defined by the hypervisor and not by the kernel.
Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: Daniel Lezcano <daniel.lezcano@linaro.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: linux-hyperv@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Link: https://lore.kernel.org/r/166749833420.218190.2102763345349472395.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Will be used later keep the address of the remapped page for the root
partition as it will be Microsoft Hypervisor defined (and thus won't be a
static address).
Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: Daniel Lezcano <daniel.lezcano@linaro.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: linux-hyperv@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Link: https://lore.kernel.org/r/166749832893.218190.16503272948154953294.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The TVAL register is 32 bit signed. Thus only the lower 31 bits are
available to specify when an interrupt is to occur at some time in the
near future. Attempting to specify a larger interval with TVAL results
in a negative time delta which means the timer fires immediately upon
being programmed, rather than firing at that expected future time.
The solution is for Linux to declare that TVAL is a 31 bit register rather
than give its true size of 32 bits. This prevents Linux from programming
TVAL with a too-large value. Note that, prior to 5.16, this little trick
was the standard way to handle TVAL in Linux, so there is nothing new
happening here on that front.
The softlockup detector hides the issue, because it keeps generating
short timer deadlines that are within the scope of the broken timer.
Disabling it, it starts using NO_HZ with much longer timer deadlines, which
turns into an interrupt flood:
11: 1124855130 949168462 758009394 76417474 104782230 30210281
310890 1734323687 GICv2 29 Level arch_timer
And "much longer" isn't that long: it takes less than 43s to underflow
TVAL at 50MHz (the frequency of the counter on XGene-1).
Some comments on the v1 version of this patch by Marc Zyngier:
XGene implements CVAL (a 64bit comparator) in terms of TVAL (a countdown
register) instead of the other way around. TVAL being a 32bit register,
the width of the counter should equally be 32. However, TVAL is a
*signed* value, and keeps counting down in the negative range once the
timer fires.
It means that any TVAL value with bit 31 set will fire immediately,
as it cannot be distinguished from an already expired timer. Reducing
the timer range back to a paltry 31 bits papers over the issue.
Another problem cannot be fixed though, which is that the timer interrupt
*must* be handled within the negative countdown period, or the interrupt
will be lost (TVAL will rollover to a positive value, indicative of a
new timer deadline).
Fixes: 012f188504 ("clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations")
Signed-off-by: Joe Korty <joe.korty@concurrent-rt.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221024165422.GA51107@zipoli.concurrent-rt.com
Link: https://lore.kernel.org/r/20221121145343.896018-1-maz@kernel.org
[maz: revamped the commit message]
Add a data structure to represent the reference TSC MSR similar to
other MSRs. This simplifies the code for updating the MSR.
Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221027095729.1676394-2-anrayabh@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
- No core code changes
- No new clocksource/event driver
- Cleanup of the TI DM clocksource/event driver
- The usual set of device tree binding updates
- Small improvement, fixes and cleanups all over the place
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmM9dgsTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoeg4D/9rJefRINQRwSQuoLfky42SLy5OZXlA
OwAZn0waUNwAXyp8pJd+WO5ZD4lcOmBlgPWNDKW3cLo8+uGzZpHTuTQMBnnHzyek
ny4y4haRySPR8KQF9Jr+JLmMZtQhUESVTUDZYSwtbka1zM3ys6rJOGBDV/fwCCK+
gSdvRjNCN3TtIkNtxWWsAF/Sk8ucK22shztsIRiqL2eCPuKmJ0gZUChnCs69ue+D
K98B7qH/IPMMtVtgX/yTEpSZxyjGVXakW1IvL3Y4Zxwc7G6OGEiDLSmIEj0pGtYr
Vt4yTvauIY7PL212J7agL1EcG7wwFy1pANaeZAIHgpewjc959b0q41Ht2bAMYH1Q
hgNgRCn47v7Iz5Ko/QycTK4NoEqqEZtfwvLMEo55bi0RxcOGDpexQOtaLM1BCtJy
EFOsdQr2NMQguKcn5qvOVW3+HJuLnYsvbHSGCIAoXHB93UtDM/edg8BCNJHGyTtH
9u/iv2hiKPYBjUG95NPo+mictuL5CmSaYNMlSdzDR5L/Eeke3Qp1zMPAxFK6FjTU
eVi6C472n83C/EpGMpfi+ms2UK3E3Dy8QgwNEJN0mTzEHXPUCjdXFWEI72jeYyHy
dV8rSzDg6B82iaZ17eVqCTL4GGyo+kT2a3j3qaUC/rp0MDys7yYkBI6csRTvETdQ
ARwPYYQYkuEEeQ==
=n458
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2022-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A boring time, timekeeping, timers update:
- No core code changes
- No new clocksource/event driver
- Cleanup of the TI DM clocksource/event driver
- The usual set of device tree binding updates
- Small improvement, fixes and cleanups all over the place"
* tag 'timers-core-2022-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
clocksource/drivers/arm_arch_timer: Fix CNTPCT_LO and CNTVCT_LO value
clocksource/drivers/imx-sysctr: handle nxp,no-divider property
dt-bindings: timer: nxp,sysctr-timer: add nxp,no-divider property
clocksource/drivers/timer-ti-dm: Get clock in probe with devm_clk_get()
clocksource/drivers/timer-ti-dm: Add flag to detect omap1
clocksource/drivers/timer-ti-dm: Move struct omap_dm_timer fields to driver
clocksource/drivers/timer-ti-dm: Use runtime PM directly and check errors
clocksource/drivers/timer-ti-dm: Move private defines to the driver
clocksource/drivers/timer-ti-dm: Simplify register access further
clocksource/drivers/timer-ti-dm: Simplify register writes with dmtimer_write()
clocksource/drivers/timer-ti-dm: Simplify register reads with dmtimer_read()
clocksource/drivers/timer-ti-dm: Drop unused functions
clocksource/drivers/timer-gxp: Add missing error handling in gxp_timer_probe
clocksource/drivers/arm_arch_timer: Fix handling of ARM erratum 858921
clocksource/drivers/exynos_mct: Enable building on ARTPEC
clocksource/drivers/exynos_mct: Support local-timers property
clocksource/drivers/exynos_mct: Support frc-shared property
dt-bindings: timer: exynos4210-mct: Add ARTPEC-8 MCT support
clocksource/drivers/sun4i: Add definition of clear interrupt
clocksource/drivers/renesas-ostm: Add support for RZ/V2L SoC
...
CNTPCT_LO and CNTVCT_LO are defined by mistake in commit '8b82c4f883a7',
so fix them according to the Arm ARM DDI 0487I.a, Table I2-4
"CNTBaseN memory map" as follows:
Offset Register Type Description
0x000 CNTPCT[31:0] RO Physical Count register.
0x004 CNTPCT[63:32] RO
0x008 CNTVCT[31:0] RO Virtual Count register.
0x00C CNTVCT[63:32] RO
Fixes: 8b82c4f883 ("clocksource/drivers/arm_arch_timer: Move MMIO timer programming over to CVAL")
Cc: stable@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Yang Guo <guoyang2@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/20220927033221.49589-1-zhangshaokun@hisilicon.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The previous hardware design embedds a internal divider for base clock.
New design not has that divider, so check the nxp,no-divider property,
if true, directly use base clock input, otherwise divide by 3 as before.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220902111207.2902493-3-peng.fan@oss.nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We can simplify the code a bit by getting the clock in probe, and using
devm_clk_get(). This will also make further changes easier as the clock
is available in probe instead of prepare.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-10-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Let's make it clear that some features need to be tested currently on
omap1. Only omap1 still uses platform_data.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-9-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
There is no longer any need to expose the elements of struct omap_dm_timer
outside the driver. The pwm and remoteproc drivers just use struct
omap_dm_timer as a cookie.
Let's move the elements of struct omap_dm_timer into struct dmtimer that
is private to the driver. To do this, we mostly rename omap_dm_timer to
dmtimer in the driver. We keep omap_dm_timer only for the exposed
functions in the platform_data for the pwm and remoteproc drivers.
Let's also add a note about not using the exposed functions internally as
those will get deprecated eventually in favor of Linux generic frameworks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-8-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Use pm_runtime_resume_and_get() and check for a possible error returned.
We want to do this as omap_dm_timer_enable() and omap_dm_timer_disable()
are exposed to the pwm and remoteproc drivers, and in the following patch
we turn struct omap_dm_timer into a cookie used by the exposed functions
only.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-7-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
These defines are only used by timer-ti-dm driver.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-6-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Let's unify register access and use dmtimer_read() and dmtimer_write()
also for the timer revision specific registers like we now do for the
shread registers.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-5-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We can simplify register write access by checking for the register write
posted mode in the write function. This way we can combine the functions
for __omap_dm_timer_write() and omap_dm_timer_write_reg() into a single
function dmtimer_write().
We update the shared register access first, the timer revision specific
register access will be updated in a later patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-4-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We can simplify register read access by checking for the register write
posted mode in the read function. This way we can combine the functions
for __omap_dm_timer_read() and omap_dm_timer_read_reg() into a single
function dmtimer_read().
We update the shared register access first, the timer revision specific
register access will be updated in a later patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-3-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We still have some unused functions left, let's drop them.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-2-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add platform_device_put() to make sure to free the platform
device in the event platform_device_add() fails.
Fixes: 5184f4bf15 ("clocksource/drivers/timer-gxp: Add HPE GXP Timer")
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Link: https://lore.kernel.org/r/20220914033018.97484-1-linyujun809@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The commit a38b71b083 ("clocksource/drivers/arm_arch_timer:
Move system register timer programming over to CVAL") moves the
programming of the timers from the countdown timer (TVAL) over
to the comparator (CVAL). This makes it necessary to read the
counter when programming next event. However, the workaround of
Cortex-A73 erratum 858921 does not set the corresponding
set_next_event_phys and set_next_event_virt.
Add the appropriate hooks to apply the erratum mitigation when
programming the next timer event.
Fixes: a38b71b083 ("clocksource/drivers/arm_arch_timer: Move system register timer programming over to CVAL")
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20220914061424.1260-1-jiangkunkun@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
This timer block is used on ARTPEC-8.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220609112738.359385-5-vincent.whitchurch@axis.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
