At least the D1 variant requires a separate clock for the TRNG.
Without this clock enabled, reading from /dev/hwrng reports:
sun8i-ce 3040000.crypto: DMA timeout for TRNG (tm=96) on flow 3
Experimentation shows that the necessary clock is the SoC's internal
RC oscillator. This makes sense, as noise from the oscillator can be
used as a source of entropy.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
GFP_DMA does not guarantee that the returned memory is aligned
for DMA. In fact for sun8i-ss it is superfluous and can be removed.
However, kmalloc may start returning DMA-unaligned memory in future
so fix this by adding the alignment by hand.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Most hw_random devices return entropy which is assumed to be of full
quality, but driver authors don't bother setting the quality knob. Some
hw_random devices return less than full quality entropy, and then driver
authors set the quality knob. Therefore, the entropy crediting should be
opt-out rather than opt-in per-driver, to reflect the actual reality on
the ground.
For example, the two Raspberry Pi RNG drivers produce full entropy
randomness, and both EDK2 and U-Boot's drivers for these treat them as
such. The result is that EFI then uses these numbers and passes the to
Linux, and Linux credits them as boot, thereby initializing the RNG.
Yet, in Linux, the quality knob was never set to anything, and so on the
chance that Linux is booted without EFI, nothing is ever credited.
That's annoying.
The same pattern appears to repeat itself throughout various drivers. In
fact, very very few drivers have bothered setting quality=1024.
Looking at the git history of existing drivers and corresponding mailing
list discussion, this conclusion tracks. There's been a decent amount of
discussion about drivers that set quality < 1024 -- somebody read and
interepreted a datasheet, or made some back of the envelope calculation
somehow. But there's been very little, if any, discussion about most
drivers where the quality is just set to 1024 or unset (or set to 1000
when the authors misunderstood the API and assumed it was base-10 rather
than base-2); in both cases the intent was fairly clear of, "this is a
hardware random device; it's fine."
So let's invert this logic. A hw_random struct's quality knob now
controls the maximum quality a driver can produce, or 0 to specify 1024.
Then, the module-wide switch called "default_quality" is changed to
represent the maximum quality of any driver. By default it's 1024, and
the quality of any particular driver is then given by:
min(default_quality, rng->quality ?: 1024);
This way, the user can still turn this off for weird reasons (and we can
replace whatever driver-specific disabling hacks existed in the past),
yet we get proper crediting for relevant RNGs.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The DMA address need to be stored in a dma_addr_t
Fixes: 359e893e8a ("crypto: sun8i-ss - rework handling of IV")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commit 2b02187bdb.
The original code was correct and arguably more robust than the
patched version.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using pm_runtime_resume_and_get() to instade of pm_runtime_get_sync
and pm_runtime_put_noidle.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no i decrement in while (i >= 0) loop.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 359e893e8a ("crypto: sun8i-ss - rework handling of IV")
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto_alloc_shash() function never returns NULL. It returns error
pointers.
Fixes: 801b7d572c ("crypto: sun8i-ss - add hmac(sha1)")
Signed-off-by: Peng Wu <wupeng58@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If there is a dma_mapping_error() then return negative error codes.
Currently this code returns success.
Fixes: 801b7d572c ("crypto: sun8i-ss - add hmac(sha1)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These failure paths should return -ENOMEM. Currently they return
success.
Fixes: 359e893e8a ("crypto: sun8i-ss - rework handling of IV")
Fixes: 8eec4563f1 ("crypto: sun8i-ss - do not allocate memory when handling hash requests")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sg length could be more than remaining data on it.
So check the length requirement against the minimum between those two
values.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "Fallback for xxx" message is annoying, remove it and store the
information in the debugfs.
Let's add more precise fallback stats and display it better.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When testing with some large SG list, the sun8i-ce drivers always
fallback even if it can handle it.
So use sg_nents_for_len() which permits to see less SGs than needed.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move all padding work to a dedicated function.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sg length could be more than remaining data on it.
So check the length requirement against the minimum between those two
values.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even if sun8i-ss does not handle hmac(sha1) directly, we can provide one
which use the already supported acceleration of sha1.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move all padding work to a dedicated function.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "Fallback for xxx" message is annoying, remove it and store the
information in the debugfs.
In the same time, reports more fallback statistics.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current sun8i-ss handle only requests with all SG length being
modulo 64.
But the last SG could be always handled by copying it on the pad buffer.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of memset all pad buffer, it is faster to only put 0 where
needed.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of allocate memory on each requests, it is easier to
pre-allocate buffers.
This made error path easier.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When testing with some large SG list, the sun8i-ss drivers always
fallback even if it can handle it.
So use sg_nents_for_len() which permits to see less SGs than needed.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The first thing we should do after dma_map_single() is to test the
result.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some fallback tests were redundant with what sun8i_ss_hash_need_fallback() already do.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sun8i-ss does not handle well the possible zero sized sg.
Fixes: d9b45418a9 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sun8i-ss fail handling IVs when doing decryption of multiple SGs in-place.
It should backup the last block of each SG source for using it later as
IVs.
In the same time remove allocation on requests path for storing all
IVs.
Fixes: f08fcced6d ("crypto: allwinner - Add sun8i-ss cryptographic offloader")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of allocate memory on each requests, it is easier to
pre-allocate buffer for backup IV.
This made error path easier.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of allocate memory on each requests, it is easier to
pre-allocate buffer for IV.
This made error path easier.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.
Fixes: 06f751b613 ("crypto: allwinner - Add sun8i-ce Crypto Engine")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.
Fixes: f08fcced6d ("crypto: allwinner - Add sun8i-ss cryptographic offloader")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When adding hashes support to sun8i-ss, I have added them only on A83T.
But I forgot that 0 is a valid algorithm ID, so hashes are enabled on A80 but
with an incorrect ID.
Anyway, even with correct IDs, hashes do not work on A80 and I cannot
find why.
So let's disable all of them on A80.
Fixes: d9b45418a9 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Allwinner D1 SoC has a crypto engine compatible with sun8i-ce.
Add support for it.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The kfree_sensitive is a kernel API to clear sensitive information
that should not be leaked to other future users of the same memory
objects and free the memory. Its function is the same as the
combination of memzero_explicit and kfree. Thus, we can replace the
combination APIs with the single kfree_sensitive API.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The kfree_sensitive is a kernel API to clear sensitive information
that should not be leaked to other future users of the same memory
objects and free the memory. Its function is the same as the
combination of memzero_explicit and kfree. Thus, we can replace the
combination APIs with the single kfree_sensitive API.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It appears there are several failure return paths that don't seem
to be free'ing pad. Fix these.
Addresses-Coverity: ("Resource leak")
Fixes: d9b45418a9 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatterlist prior to the mapping, not after the mapping.
So fix this usage.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As of commit bb475230b8 ("reset: make optional functions really
optional"), the reset framework API calls use NULL pointers to describe
optional, non-present reset controls.
This allows to unconditionally return errors from
devm_reset_control_get_optional_exclusive.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When dma_mapping_error() returns an error, no error return code of
sun8i_ce_prng_generate() is assigned.
To fix this bug, err is assigned with -EFAULT as error return code.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the case where the dma_iv mapping fails, the return error path leaks
the memory allocated to object d. Fix this by adding a new error return
label and jumping to this to ensure d is free'd before the return.
Addresses-Coverity: ("Resource leak")
Fixes: ac2614d721 ("crypto: sun8i-ss - Add support for the PRNG")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a memory leak on an error path.
Fixes: d9b45418a9 ("crypto: sun8i-ss - support hash algorithms")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
