mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 09:19:51 +00:00
934 commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
a93e884edf |
Driver core changes for 6.3-rc1
Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6 6oeFOjD3JDju3cQsfGgd =Su6W -----END PGP SIGNATURE----- Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems" [ Geert Uytterhoeven points out that that last sentence isn't true, and that there's a pending report that has a fix that is queued up - Linus ] * tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits) debugfs: drop inline constant formatting for ERR_PTR(-ERROR) OPP: fix error checking in opp_migrate_dentry() debugfs: update comment of debugfs_rename() i3c: fix device.h kernel-doc warnings dma-mapping: no need to pass a bus_type into get_arch_dma_ops() driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place Revert "driver core: add error handling for devtmpfs_create_node()" Revert "devtmpfs: add debug info to handle()" Revert "devtmpfs: remove return value of devtmpfs_delete_node()" driver core: cpu: don't hand-override the uevent bus_type callback. devtmpfs: remove return value of devtmpfs_delete_node() devtmpfs: add debug info to handle() driver core: add error handling for devtmpfs_create_node() driver core: bus: update my copyright notice driver core: bus: add bus_get_dev_root() function driver core: bus: constify bus_unregister() driver core: bus: constify some internal functions driver core: bus: constify bus_get_kset() driver core: bus: constify bus_register/unregister_notifier() driver core: remove private pointer from struct bus_type ... |
||
![]() |
b8878e5a5c |
hyperv-next for v6.3.
-----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmPzgDgTHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXrc7CACfG4SSd8KkWU/y8Q66Irxdau0a3ETD KL4UNRKGIyKujufgFsme79O6xVSSsCNSay449wk20hqn8lnwbSRi9pUwmLn29hfd CMFleWIqgwGFfC1do5DRF1vrt1siuG/jVE07mWsEwuY2iHx/es+H7LiQKidhkndZ DhXRqoi7VYiJv5fRSumpkUJrMZiI96o9Mk09HUksdMwCn3+7RQEqHnlTH5KOozKF iMroDB72iNw5Na/USZwWL2EDRptENam3lFkPBeDPqNw0SbG4g65JGPR9DSa0Lkbq AGCJQkdU33mcYQG5MY7R4K1evufpOl/apqLW7h92j45Znr9ok6Vr2c1R =J1VT -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - allow Linux to run as the nested root partition for Microsoft Hypervisor (Jinank Jain and Nuno Das Neves) - clean up the return type of callback functions (Dawei Li) * tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Fix hv_get/set_register for nested bringup Drivers: hv: Make remove callback of hyperv driver void returned Drivers: hv: Enable vmbus driver for nested root partition x86/hyperv: Add an interface to do nested hypercalls Drivers: hv: Setup synic registers in case of nested root partition x86/hyperv: Add support for detecting nested hypervisor |
||
![]() |
6dfb077142 |
HV: hv_balloon: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Fixes:
|
||
![]() |
2a81ada32f |
driver core: make struct bus_type.uevent() take a const *
The uevent() callback in struct bus_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
96ec293962 |
Drivers: hv: Make remove callback of hyperv driver void returned
Since commit
|
||
![]() |
8536290f00 |
Drivers: hv: Enable vmbus driver for nested root partition
Currently VMBus driver is not initialized for root partition but we need to enable the VMBus driver for nested root partition. This is required, so that L2 root can use the VMBus devices. Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/c3cdd2cf2bffeba388688640eb61bc182e4c041d.1672639707.git.jinankjain@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
7fec185a56 |
Drivers: hv: Setup synic registers in case of nested root partition
Child partitions are free to allocate SynIC message and event page but in case of root partition it must use the pages allocated by Microsoft Hypervisor (MSHV). Base address for these pages can be found using synthetic MSRs exposed by MSHV. There is a slight difference in those MSRs for nested vs non-nested root partition. Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com> Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/cb951fb1ad6814996fc54f4a255c5841a20a151f.1672639707.git.jinankjain@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
c4bdf94f97 |
x86/hyperv: Add support for detecting nested hypervisor
Detect if Linux is running as a nested hypervisor in the root partition for Microsoft Hypervisor, using flags provided by MSHV. Expose a new variable hv_nested that is used later for decisions specific to the nested use case. Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/8e3e7112806e81d2292a66a56fe547162754ecea.1672639707.git.jinankjain@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
7e68dd7d07 |
Networking changes for 6.2.
Core ---- - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations. - Add inet drop monitor support. - A few GRO performance improvements. - Add infrastructure for atomic dev stats, addressing long standing data races. - De-duplicate common code between OVS and conntrack offloading infrastructure. - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements. - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs. - Add the helper support for connection-tracking OVS offload. BPF --- - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF. - Make cgroup local storage available to non-cgroup attached BPF programs. - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers. - A relevant bunch of BPF verifier fixes and improvements. - Veristat tool improvements to support custom filtering, sorting, and replay of results. - Add LLVM disassembler as default library for dumping JITed code. - Lots of new BPF documentation for various BPF maps. - Add bpf_rcu_read_{,un}lock() support for sleepable programs. - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs. - Add support storing struct task_struct objects as kptrs in maps. - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values. - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions. Protocols --------- - TCP: implement Protective Load Balancing across switch links. - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path. - UDP: Introduce optional per-netns hash lookup table. - IPv6: simplify and cleanup sockets disposal. - Netlink: support different type policies for each generic netlink operation. - MPTCP: add MSG_FASTOPEN and FastOpen listener side support. - MPTCP: add netlink notification support for listener sockets events. - SCTP: add VRF support, allowing sctp sockets binding to VRF devices. - Add bridging MAC Authentication Bypass (MAB) support. - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios. - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage. - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading. - IPSec: extended ack support for more descriptive XFRM error reporting. - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking. - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks. - Tun: bump the link speed from 10Mbps to 10Gbps. - Tun/VirtioNet: implement UDP segmentation offload support. Driver API ---------- - PHY/SFP: improve power level switching between standard level 1 and the higher power levels. - New API for netdev <-> devlink_port linkage. - PTP: convert existing drivers to new frequency adjustment implementation. - DSA: add support for rx offloading. - Autoload DSA tagging driver when dynamically changing protocol. - Add new PCP and APPTRUST attributes to Data Center Bridging. - Add configuration support for 800Gbps link speed. - Add devlink port function attribute to enable/disable RoCE and migratable. - Extend devlink-rate to support strict prioriry and weighted fair queuing. - Add devlink support to directly reading from region memory. - New device tree helper to fetch MAC address from nvmem. - New big TCP helper to simplify temporary header stripping. New hardware / drivers ---------------------- - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches. - Marvel Prestera AC5X Ethernet Switch. - WangXun 10 Gigabit NIC. - Motorcomm yt8521 Gigabit Ethernet. - Microchip ksz9563 Gigabit Ethernet Switch. - Microsoft Azure Network Adapter. - Linux Automation 10Base-T1L adapter. - PHY: - Aquantia AQR112 and AQR412. - Motorcomm YT8531S. - PTP: - Orolia ART-CARD. - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices. - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices. - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets. - Realtek RTL8852BE and RTL8723DS. - Cypress.CYW4373A0 WiFi + Bluetooth combo device. Drivers ------- - CAN: - gs_usb: bus error reporting support. - kvaser_usb: listen only and bus error reporting support. - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping. - implement devlink-rate support. - support direct read from memory. - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate. - Support for enhanced events compression. - extend H/W offload packet manipulation capabilities. - implement IPSec packet offload mode. - nVidia/Mellanox (mlx4): - better big TCP support. - Netronome Ethernet NICs (nfp): - IPsec offload support. - add support for multicast filter. - Broadcom: - RSS and PTP support improvements. - AMD/SolarFlare: - netlink extened ack improvements. - add basic flower matches to offload, and related stats. - Virtual NICs: - ibmvnic: introduce affinity hint support. - small / embedded: - FreeScale fec: add initial XDP support. - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood. - TI am65-cpsw: add suspend/resume support. - Mediatek MT7986: add RX wireless wthernet dispatch support. - Realtek 8169: enable GRO software interrupt coalescing per default. - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP. - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support. - add ip6gre support. - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support. - enable flow offload support. - Renesas: - add rswitch R-Car Gen4 gPTP support. - Microchip (lan966x): - add full XDP support. - add TC H/W offload via VCAP. - enable PTP on bridge interfaces. - Microchip (ksz8): - add MTU support for KSZ8 series. - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan. - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support. - add ack signal support. - enable coredump support. - remain_on_channel support. - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities. - 320 MHz channels support. - RealTek WiFi (rtw89): - new dynamic header firmware format support. - wake-over-WLAN support. Signed-off-by: Paolo Abeni <pabeni@redhat.com> -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmOYXUcSHHBhYmVuaUBy ZWRoYXQuY29tAAoJECkkeY3MjxOk8zQP/R7BZtbJMTPiWkRnSoKHnAyupDVwrz5U ktukLkwPsCyJuEbAjgxrxf4EEEQ9uq2FFlxNSYuKiiQMqIpFxV6KED7LCUygn4Tc kxtkp0Q+5XiqisWlQmtfExf2OjuuPqcjV9tWCDBI6GebKUbfNwY/eI44RcMu4BSv DzIlW5GkX/kZAPqnnuqaLsN3FudDTJHGEAD7NbA++7wJ076RWYSLXlFv0Z+SCSPS H8/PEG0/ZK/65rIWMAFRClJ9BNIDwGVgp0GrsIvs1gqbRUOlA1hl1rDM21TqtNFf 5QPQT7sIfTcCE/nerxKJD5JE3JyP+XRlRn96PaRw3rt4MgI6I/EOj/HOKQ5tMCNc oPiqb7N70+hkLZyr42qX+vN9eDPjp2koEQm7EO2Zs+/534/zWDs24Zfk/Aa1ps0I Fa82oGjAgkBhGe/FZ6i5cYoLcyxqRqZV1Ws9XQMl72qRC7/BwvNbIW6beLpCRyeM yYIU+0e9dEm+wHQEdh2niJuVtR63hy8tvmPx56lyh+6u0+pondkwbfSiC5aD3kAC ikKsN5DyEsdXyiBAlytCEBxnaOjQy4RAz+3YXSiS0eBNacXp03UUrNGx4Pzpu/D0 QLFJhBnMFFCgy5to8/DvKnrTPgZdSURwqbIUcZdvU21f1HLR8tUTpaQnYffc/Whm V8gnt1EL+0cc =CbJC -----END PGP SIGNATURE----- Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ... |
||
![]() |
456ed864fd |
ACPI updates for 6.2-rc1
- Update the ACPICA code in the kernel to the 20221020 upstream version and fix a couple of issues in it: * Make acpi_ex_load_op() match upstream implementation (Rafael Wysocki). * Add support for loong_arch-specific APICs in MADT (Huacai Chen). * Add support for fixed PCIe wake event (Huacai Chen). * Add EBDA pointer sanity checks (Vit Kabele). * Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele). * Add CCEL table support to both compiler/disassembler (Kuppuswamy Sathyanarayanan). * Add a couple of new UUIDs to the known UUID list (Bob Moore). * Add support for FFH Opregion special context data (Sudeep Holla). * Improve warning message for "invalid ACPI name" (Bob Moore). * Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT table (Alison Schofield). * Prepare IORT support for revision E.e (Robin Murphy). * Finish support for the CDAT table (Bob Moore). * Fix error code path in acpi_ds_call_control_method() (Rafael Wysocki). * Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li Zetao). * Update the version of the ACPICA code in the kernel (Bob Moore). - Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device enumeration code (Giulio Benetti). - Change the return type of the ACPI driver remove callback to void and update its users accordingly (Dawei Li). - Add general support for FFH address space type and implement the low- level part of it for ARM64 (Sudeep Holla). - Fix stale comments in the ACPI tables parsing code and make it print more messages related to MADT (Hanjun Guo, Huacai Chen). - Replace invocations of generic library functions with more kernel- specific counterparts in the ACPI sysfs interface (Christophe JAILLET, Xu Panda). - Print full name paths of ACPI power resource objects during enumeration (Kane Chen). - Eliminate a compiler warning regarding a missing function prototype in the ACPI power management code (Sudeep Holla). - Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong, Colin Ian King, Sudeep Holla). - Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC driver (Mia Kanashi). - Add some mew ACPI backlight handling quirks and update some existing ones (Hans de Goede). - Make the ACPI backlight driver prefer the native backlight control over vendor backlight control when possible (Hans de Goede). - Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König). - Use xchg_release() instead of cmpxchg() for updating new GHES cache slots (Ard Biesheuvel). - Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu). - Add new I2C device enumeration quirks for Medion Lifetab S10346 and Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede). - Make the ACPI battery driver notify user space about adding new battery hooks and removing the existing ones (Armin Wolf). - Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE() for freeing acpi_object structures to help diagnostics (Wang ShaoBo). - Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface code (ye xingchen). - Fix the _FIF package extraction failure handling in the ACPI fan driver (Hanjun Guo). - Fix the PCC mailbox handling error code path (Huisong Li). - Avoid using PCC Opregions if there is no platform interrupt allocated for this purpose (Huisong Li). - Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and CPPC library (ye xingchen). - Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng Wang). - Fix name memory leak in pnp_alloc_dev() (Yang Yingliang). - Do not disable PNP devices on suspend when they cannot be re-enabled on resume (Hans de Goede). - Clean up the ACPI thermal driver a bit (Rafael Wysocki). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmOXV10SHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxuOwP/2zew6val2Jf7I/Yxf1iQLlRyGmhFnaH wpltJvBjlHjAUKnPQ/kLYK9fjuUY5HVgjOE03WpwhFUpmhftYTrSkhoVkJ1Mw9Zl RNOAEgCG484ThHiTIVp/dMPxrtfuqpdbamhWX3Q51IfXjGW8Vc/lDxIa3k/JQxyq ko8GFPCoebJrSCfuwaAf2+xSQaf6dq4jpL/rlIk+nYMMB9mQmXhNEhc+l97NaCe8 MyCIGynyNbhGsIlwdHRvTp04EIe8h0Z1+Dyns7g/TrzHj3Aezy7QVZbn8sKdZWa1 W/Ck9QST5tfpDWyr+hUXxUJjEn4Yy+GXjM2xON0EMx5q+JD9XsOpwWOVwTR7CS5s FwEd6I89SC8OZM86AgMtnGxygjpK24R/kGzHjhG15IQCsypc8Rvzoxl0L0YVoon/ UTkE57GzNWVzu0pY/oXJc2aT7lVqFXMFZ6ft/zHnBRnQmrcIi+xgDO5ni5KxctFN TVFwbAMCuwVx6IOcVQCZM2g4aJw426KpUn19fKnXvPwR5UIufBaCzSKWMiYrtdXr O5BM8ElYuyKCWGYEE0GSMjZygyDpyY6ENLH7s7P1IEmFyigBzaaGBbKm108JJq4V eCWJYTAx8pAptsU/vfuMvEQ1ErfhZ3TTokA5Lv0uPf53VcAnWDb7EAbW6ZGMwFSI IaV6cv6ILoqO =GVzp -----END PGP SIGNATURE----- Merge tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and PNP updates from Rafael Wysocki: "These include new code (for instance, support for the FFH address space type and support for new firmware data structures in ACPICA), some new quirks (mostly related to backlight handling and I2C enumeration), a number of fixes and a fair amount of cleanups all over. Specifics: - Update the ACPICA code in the kernel to the 20221020 upstream version and fix a couple of issues in it: - Make acpi_ex_load_op() match upstream implementation (Rafael Wysocki) - Add support for loong_arch-specific APICs in MADT (Huacai Chen) - Add support for fixed PCIe wake event (Huacai Chen) - Add EBDA pointer sanity checks (Vit Kabele) - Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele) - Add CCEL table support to both compiler/disassembler (Kuppuswamy Sathyanarayanan) - Add a couple of new UUIDs to the known UUID list (Bob Moore) - Add support for FFH Opregion special context data (Sudeep Holla) - Improve warning message for "invalid ACPI name" (Bob Moore) - Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT table (Alison Schofield) - Prepare IORT support for revision E.e (Robin Murphy) - Finish support for the CDAT table (Bob Moore) - Fix error code path in acpi_ds_call_control_method() (Rafael Wysocki) - Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li Zetao) - Update the version of the ACPICA code in the kernel (Bob Moore) - Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device enumeration code (Giulio Benetti) - Change the return type of the ACPI driver remove callback to void and update its users accordingly (Dawei Li) - Add general support for FFH address space type and implement the low- level part of it for ARM64 (Sudeep Holla) - Fix stale comments in the ACPI tables parsing code and make it print more messages related to MADT (Hanjun Guo, Huacai Chen) - Replace invocations of generic library functions with more kernel- specific counterparts in the ACPI sysfs interface (Christophe JAILLET, Xu Panda) - Print full name paths of ACPI power resource objects during enumeration (Kane Chen) - Eliminate a compiler warning regarding a missing function prototype in the ACPI power management code (Sudeep Holla) - Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong, Colin Ian King, Sudeep Holla) - Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC driver (Mia Kanashi) - Add some mew ACPI backlight handling quirks and update some existing ones (Hans de Goede) - Make the ACPI backlight driver prefer the native backlight control over vendor backlight control when possible (Hans de Goede) - Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König) - Use xchg_release() instead of cmpxchg() for updating new GHES cache slots (Ard Biesheuvel) - Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu) - Add new I2C device enumeration quirks for Medion Lifetab S10346 and Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede) - Make the ACPI battery driver notify user space about adding new battery hooks and removing the existing ones (Armin Wolf) - Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE() for freeing acpi_object structures to help diagnostics (Wang ShaoBo) - Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface code (ye xingchen) - Fix the _FIF package extraction failure handling in the ACPI fan driver (Hanjun Guo) - Fix the PCC mailbox handling error code path (Huisong Li) - Avoid using PCC Opregions if there is no platform interrupt allocated for this purpose (Huisong Li) - Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and CPPC library (ye xingchen) - Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng Wang) - Fix name memory leak in pnp_alloc_dev() (Yang Yingliang) - Do not disable PNP devices on suspend when they cannot be re-enabled on resume (Hans de Goede) - Clean up the ACPI thermal driver a bit (Rafael Wysocki)" * tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits) ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346 ACPI: APEI: EINJ: Refactor available_error_type_show() ACPI: APEI: EINJ: Fix formatting errors ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value ACPI: processor: perflib: Rearrange acpi_processor_notify_smm() ACPI: processor: perflib: Rearrange unregistration routine ACPI: processor: perflib: Drop redundant parentheses ACPI: processor: perflib: Adjust white space ACPI: processor: idle: Drop unnecessary statements and parens ACPI: thermal: Adjust critical.flags.valid check ACPI: fan: Convert to use sysfs_emit_at() API ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() ACPI: battery: Call power_supply_changed() when adding hooks ACPI: use sysfs_emit() instead of scnprintf() ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F) ACPI: APEI: Remove a useless include PNP: Do not disable devices on suspend when they cannot be re-enabled on resume ACPI: processor: Silence missing prototype warnings ACPI: processor_idle: Silence missing prototype warnings ACPI: PM: Silence missing prototype warning ... |
||
![]() |
9d33edb20f |
Updates for the interrupt core and driver subsystem:
- Core: The bulk is the rework of the MSI subsystem to support per device MSI interrupt domains. This solves conceptual problems of the current PCI/MSI design which are in the way of providing support for PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device. IMS (Interrupt Message Store] is a new specification which allows device manufactures to provide implementation defined storage for MSI messages contrary to the uniform and specification defined storage mechanisms for PCI/MSI and PCI/MSI-X. IMS not only allows to overcome the size limitations of the MSI-X table, but also gives the device manufacturer the freedom to store the message in arbitrary places, even in host memory which is shared with the device. There have been several attempts to glue this into the current MSI code, but after lengthy discussions it turned out that there is a fundamental design problem in the current PCI/MSI-X implementation. This needs some historical background. When PCI/MSI[-X] support was added around 2003, interrupt management was completely different from what we have today in the actively developed architectures. Interrupt management was completely architecture specific and while there were attempts to create common infrastructure the commonalities were rudimentary and just providing shared data structures and interfaces so that drivers could be written in an architecture agnostic way. The initial PCI/MSI[-X] support obviously plugged into this model which resulted in some basic shared infrastructure in the PCI core code for setting up MSI descriptors, which are a pure software construct for holding data relevant for a particular MSI interrupt, but the actual association to Linux interrupts was completely architecture specific. This model is still supported today to keep museum architectures and notorious stranglers alive. In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel, which was creating yet another architecture specific mechanism and resulted in an unholy mess on top of the existing horrors of x86 interrupt handling. The x86 interrupt management code was already an incomprehensible maze of indirections between the CPU vector management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X] implementation. At roughly the same time ARM struggled with the ever growing SoC specific extensions which were glued on top of the architected GIC interrupt controller. This resulted in a fundamental redesign of interrupt management and provided the today prevailing concept of hierarchical interrupt domains. This allowed to disentangle the interactions between x86 vector domain and interrupt remapping and also allowed ARM to handle the zoo of SoC specific interrupt components in a sane way. The concept of hierarchical interrupt domains aims to encapsulate the functionality of particular IP blocks which are involved in interrupt delivery so that they become extensible and pluggable. The X86 encapsulation looks like this: |--- device 1 [Vector]---[Remapping]---[PCI/MSI]--|... |--- device N where the remapping domain is an optional component and in case that it is not available the PCI/MSI[-X] domains have the vector domain as their parent. This reduced the required interaction between the domains pretty much to the initialization phase where it is obviously required to establish the proper parent relation ship in the components of the hierarchy. While in most cases the model is strictly representing the chain of IP blocks and abstracting them so they can be plugged together to form a hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware it's clear that the actual PCI/MSI[-X] interrupt controller is not a global entity, but strict a per PCI device entity. Here we took a short cut on the hierarchical model and went for the easy solution of providing "global" PCI/MSI domains which was possible because the PCI/MSI[-X] handling is uniform across the devices. This also allowed to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in turn made it simple to keep the existing architecture specific management alive. A similar problem was created in the ARM world with support for IP block specific message storage. Instead of going all the way to stack a IP block specific domain on top of the generic MSI domain this ended in a construct which provides a "global" platform MSI domain which allows overriding the irq_write_msi_msg() callback per allocation. In course of the lengthy discussions we identified other abuse of the MSI infrastructure in wireless drivers, NTB etc. where support for implementation specific message storage was just mindlessly glued into the existing infrastructure. Some of this just works by chance on particular platforms but will fail in hard to diagnose ways when the driver is used on platforms where the underlying MSI interrupt management code does not expect the creative abuse. Another shortcoming of today's PCI/MSI-X support is the inability to allocate or free individual vectors after the initial enablement of MSI-X. This results in an works by chance implementation of VFIO (PCI pass-through) where interrupts on the host side are not set up upfront to avoid resource exhaustion. They are expanded at run-time when the guest actually tries to use them. The way how this is implemented is that the host disables MSI-X and then re-enables it with a larger number of vectors again. That works by chance because most device drivers set up all interrupts before the device actually will utilize them. But that's not universally true because some drivers allocate a large enough number of vectors but do not utilize them until it's actually required, e.g. for acceleration support. But at that point other interrupts of the device might be in active use and the MSI-X disable/enable dance can just result in losing interrupts and therefore hard to diagnose subtle problems. Last but not least the "global" PCI/MSI-X domain approach prevents to utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS is not longer providing a uniform storage and configuration model. The solution to this is to implement the missing step and switch from global PCI/MSI domains to per device PCI/MSI domains. The resulting hierarchy then looks like this: |--- [PCI/MSI] device 1 [Vector]---[Remapping]---|... |--- [PCI/MSI] device N which in turn allows to provide support for multiple domains per device: |--- [PCI/MSI] device 1 |--- [PCI/IMS] device 1 [Vector]---[Remapping]---|... |--- [PCI/MSI] device N |--- [PCI/IMS] device N This work converts the MSI and PCI/MSI core and the x86 interrupt domains to the new model, provides new interfaces for post-enable allocation/free of MSI-X interrupts and the base framework for PCI/IMS. PCI/IMS has been verified with the work in progress IDXD driver. There is work in progress to convert ARM over which will replace the platform MSI train-wreck. The cleanup of VFIO, NTB and other creative "solutions" are in the works as well. - Drivers: - Updates for the LoongArch interrupt chip drivers - Support for MTK CIRQv2 - The usual small fixes and updates all over the place -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmOUsygTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoYXiD/40tXKzCzf0qFIqUlZLia1N3RRrwrNC DVTixuLtR9MrjwE+jWLQILa85SHInV8syXHSd35SzhsGDxkURFGi+HBgVWmysODf br9VSh3Gi+kt7iXtIwAg8WNWviGNmS3kPksxCko54F0YnJhMY5r5bhQVUBQkwFG2 wES1C9Uzd4pdV2bl24Z+WKL85cSmZ+pHunyKw1n401lBABXnTF9c4f13zC14jd+y wDxNrmOxeL3mEH4Pg6VyrDuTOURSf3TjJjeEq3EYqvUo0FyLt9I/cKX0AELcZQX7 fkRjrQQAvXNj39RJfeSkojDfllEPUHp7XSluhdBu5aIovSamdYGCDnuEoZ+l4MJ+ CojIErp3Dwj/uSaf5c7C3OaDAqH2CpOFWIcrUebShJE60hVKLEpUwd6W8juplaoT gxyXRb1Y+BeJvO8VhMN4i7f3232+sj8wuj+HTRTTbqMhkElnin94tAx8rgwR1sgR BiOGMJi4K2Y8s9Rqqp0Dvs01CW4guIYvSR4YY+WDbbi1xgiev89OYs6zZTJCJe4Y NUwwpqYSyP1brmtdDdBOZLqegjQm+TwUb6oOaasFem4vT1swgawgLcDnPOx45bk5 /FWt3EmnZxMz99x9jdDn1+BCqAZsKyEbEY1avvhPVMTwoVIuSX2ceTBMLseGq+jM 03JfvdxnueM3gw== =9erA -----END PGP SIGNATURE----- Merge tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt core and driver subsystem: The bulk is the rework of the MSI subsystem to support per device MSI interrupt domains. This solves conceptual problems of the current PCI/MSI design which are in the way of providing support for PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device. IMS (Interrupt Message Store] is a new specification which allows device manufactures to provide implementation defined storage for MSI messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified message store which is uniform accross all devices). The PCI/MSI[-X] uniformity allowed us to get away with "global" PCI/MSI domains. IMS not only allows to overcome the size limitations of the MSI-X table, but also gives the device manufacturer the freedom to store the message in arbitrary places, even in host memory which is shared with the device. There have been several attempts to glue this into the current MSI code, but after lengthy discussions it turned out that there is a fundamental design problem in the current PCI/MSI-X implementation. This needs some historical background. When PCI/MSI[-X] support was added around 2003, interrupt management was completely different from what we have today in the actively developed architectures. Interrupt management was completely architecture specific and while there were attempts to create common infrastructure the commonalities were rudimentary and just providing shared data structures and interfaces so that drivers could be written in an architecture agnostic way. The initial PCI/MSI[-X] support obviously plugged into this model which resulted in some basic shared infrastructure in the PCI core code for setting up MSI descriptors, which are a pure software construct for holding data relevant for a particular MSI interrupt, but the actual association to Linux interrupts was completely architecture specific. This model is still supported today to keep museum architectures and notorious stragglers alive. In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel, which was creating yet another architecture specific mechanism and resulted in an unholy mess on top of the existing horrors of x86 interrupt handling. The x86 interrupt management code was already an incomprehensible maze of indirections between the CPU vector management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X] implementation. At roughly the same time ARM struggled with the ever growing SoC specific extensions which were glued on top of the architected GIC interrupt controller. This resulted in a fundamental redesign of interrupt management and provided the today prevailing concept of hierarchical interrupt domains. This allowed to disentangle the interactions between x86 vector domain and interrupt remapping and also allowed ARM to handle the zoo of SoC specific interrupt components in a sane way. The concept of hierarchical interrupt domains aims to encapsulate the functionality of particular IP blocks which are involved in interrupt delivery so that they become extensible and pluggable. The X86 encapsulation looks like this: |--- device 1 [Vector]---[Remapping]---[PCI/MSI]--|... |--- device N where the remapping domain is an optional component and in case that it is not available the PCI/MSI[-X] domains have the vector domain as their parent. This reduced the required interaction between the domains pretty much to the initialization phase where it is obviously required to establish the proper parent relation ship in the components of the hierarchy. While in most cases the model is strictly representing the chain of IP blocks and abstracting them so they can be plugged together to form a hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware it's clear that the actual PCI/MSI[-X] interrupt controller is not a global entity, but strict a per PCI device entity. Here we took a short cut on the hierarchical model and went for the easy solution of providing "global" PCI/MSI domains which was possible because the PCI/MSI[-X] handling is uniform across the devices. This also allowed to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in turn made it simple to keep the existing architecture specific management alive. A similar problem was created in the ARM world with support for IP block specific message storage. Instead of going all the way to stack a IP block specific domain on top of the generic MSI domain this ended in a construct which provides a "global" platform MSI domain which allows overriding the irq_write_msi_msg() callback per allocation. In course of the lengthy discussions we identified other abuse of the MSI infrastructure in wireless drivers, NTB etc. where support for implementation specific message storage was just mindlessly glued into the existing infrastructure. Some of this just works by chance on particular platforms but will fail in hard to diagnose ways when the driver is used on platforms where the underlying MSI interrupt management code does not expect the creative abuse. Another shortcoming of today's PCI/MSI-X support is the inability to allocate or free individual vectors after the initial enablement of MSI-X. This results in an works by chance implementation of VFIO (PCI pass-through) where interrupts on the host side are not set up upfront to avoid resource exhaustion. They are expanded at run-time when the guest actually tries to use them. The way how this is implemented is that the host disables MSI-X and then re-enables it with a larger number of vectors again. That works by chance because most device drivers set up all interrupts before the device actually will utilize them. But that's not universally true because some drivers allocate a large enough number of vectors but do not utilize them until it's actually required, e.g. for acceleration support. But at that point other interrupts of the device might be in active use and the MSI-X disable/enable dance can just result in losing interrupts and therefore hard to diagnose subtle problems. Last but not least the "global" PCI/MSI-X domain approach prevents to utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS is not longer providing a uniform storage and configuration model. The solution to this is to implement the missing step and switch from global PCI/MSI domains to per device PCI/MSI domains. The resulting hierarchy then looks like this: |--- [PCI/MSI] device 1 [Vector]---[Remapping]---|... |--- [PCI/MSI] device N which in turn allows to provide support for multiple domains per device: |--- [PCI/MSI] device 1 |--- [PCI/IMS] device 1 [Vector]---[Remapping]---|... |--- [PCI/MSI] device N |--- [PCI/IMS] device N This work converts the MSI and PCI/MSI core and the x86 interrupt domains to the new model, provides new interfaces for post-enable allocation/free of MSI-X interrupts and the base framework for PCI/IMS. PCI/IMS has been verified with the work in progress IDXD driver. There is work in progress to convert ARM over which will replace the platform MSI train-wreck. The cleanup of VFIO, NTB and other creative "solutions" are in the works as well. Drivers: - Updates for the LoongArch interrupt chip drivers - Support for MTK CIRQv2 - The usual small fixes and updates all over the place" * tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits) irqchip/ti-sci-inta: Fix kernel doc irqchip/gic-v2m: Mark a few functions __init irqchip/gic-v2m: Include arm-gic-common.h irqchip/irq-mvebu-icu: Fix works by chance pointer assignment iommu/amd: Enable PCI/IMS iommu/vt-d: Enable PCI/IMS x86/apic/msi: Enable PCI/IMS PCI/MSI: Provide pci_ims_alloc/free_irq() PCI/MSI: Provide IMS (Interrupt Message Store) support genirq/msi: Provide constants for PCI/IMS support x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X PCI/MSI: Provide prepare_desc() MSI domain op PCI/MSI: Split MSI-X descriptor setup genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN genirq/msi: Provide msi_domain_alloc_irq_at() genirq/msi: Provide msi_domain_ops:: Prepare_desc() genirq/msi: Provide msi_desc:: Msi_data genirq/msi: Provide struct msi_map x86/apic/msi: Remove arch_create_remap_msi_irq_domain() ... |
||
![]() |
45494d77f2 |
Merge branches 'acpi-scan', 'acpi-bus', 'acpi-tables' and 'acpi-sysfs'
Merge ACPI changes related to device enumeration, device object managenet, operation region handling, table parsing and sysfs interface: - Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device enumeration code (Giulio Benetti). - Change the return type of the ACPI driver remove callback to void and update its users accordingly (Dawei Li). - Add general support for FFH address space type and implement the low- level part of it for ARM64 (Sudeep Holla). - Fix stale comments in the ACPI tables parsing code and make it print more messages related to MADT (Hanjun Guo, Huacai Chen). - Replace invocations of generic library functions with more kernel- specific counterparts in the ACPI sysfs interface (Christophe JAILLET, Xu Panda). * acpi-scan: ACPI: scan: substitute empty_zero_page with helper ZERO_PAGE(0) * acpi-bus: ACPI: FFH: Silence missing prototype warnings ACPI: make remove callback of ACPI driver void ACPI: bus: Fix the _OSC capability check for FFH OpRegion arm64: Add architecture specific ACPI FFH Opregion callbacks ACPI: Implement a generic FFH Opregion handler * acpi-tables: ACPI: tables: Fix the stale comments for acpi_locate_initial_tables() ACPI: tables: Print CORE_PIC information when MADT is parsed * acpi-sysfs: ACPI: sysfs: use sysfs_emit() to instead of scnprintf() ACPI: sysfs: Use kstrtobool() instead of strtobool() |
||
![]() |
f2bb566f5c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
tools/lib/bpf/ringbuf.c |
||
![]() |
d786e00d19 |
drivers: hv, hyperv_fb: Untangle and refactor Hyper-V panic notifiers
Currently Hyper-V guests are among the most relevant users of the panic infrastructure, like panic notifiers, kmsg dumpers, etc. The reasons rely both in cleaning-up procedures (closing hypervisor <-> guest connection, disabling some paravirtualized timer) as well as to data collection (sending panic information to the hypervisor) and framebuffer management. The thing is: some notifiers are related to others, ordering matters, some functionalities are duplicated and there are lots of conditionals behind sending panic information to the hypervisor. As part of an effort to clean-up the panic notifiers mechanism and better document things, we hereby address some of the issues/complexities of Hyper-V panic handling through the following changes: (a) We have die and panic notifiers on vmbus_drv.c and both have goals of sending panic information to the hypervisor, though the panic notifier is also responsible for a cleaning-up procedure. This commit clears the code by splitting the panic notifier in two, one for closing the vmbus connection whereas the other is only for sending panic info to hypervisor. With that, it was possible to merge the die and panic notifiers in a single/well-documented function, and clear some conditional complexities on sending such information to the hypervisor. (b) There is a Hyper-V framebuffer panic notifier, which relies in doing a vmbus operation that demands a valid connection. So, we must order this notifier with the panic notifier from vmbus_drv.c, to guarantee that the framebuffer code executes before the vmbus connection is unloaded. Also, this commit removes a useless header. Although there is code rework and re-ordering, we expect that this change has no functional regressions but instead optimize the path and increase panic reliability on Hyper-V. This was tested on Hyper-V with success. Cc: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Tianyu Lan <Tianyu.Lan@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Fabio A M Martins <fabiomirmar@gmail.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220819221731.480795-11-gpiccoli@igalia.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
1d044ca035 |
video: hyperv_fb: Avoid taking busy spinlock on panic path
The Hyper-V framebuffer code registers a panic notifier in order to try updating its fbdev if the kernel crashed. The notifier callback is straightforward, but it calls the vmbus_sendpacket() routine eventually, and such function takes a spinlock for the ring buffer operations. Panic path runs in atomic context, with local interrupts and preemption disabled, and all secondary CPUs shutdown. That said, taking a spinlock might cause a lockup if a secondary CPU was disabled with such lock taken. Fix it here by checking if the ring buffer spinlock is busy on Hyper-V framebuffer panic notifier; if so, bail-out avoiding the potential lockup scenario. Cc: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Michael Kelley <mikelley@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Tianyu Lan <Tianyu.Lan@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Tested-by: Fabio A M Martins <fabiomirmar@gmail.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220819221731.480795-10-gpiccoli@igalia.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
dc60f2db39 |
hv_balloon: Add support for configurable order free page reporting
Newer versions of Hyper-V allow reporting unused guest pages in chunks smaller than 2 Mbytes. Using smaller chunks allows reporting more unused guest pages, but with increased overhead in the finding the small chunks. To make this tradeoff configurable, use the existing page_reporting_order module parameter to control the reporting order. Drop and refine checks that restricted the minimun page reporting order to 2Mbytes size pages. Add appropriate checks to make sure the underlying Hyper-V versions support cold discard hints of any order (and not just starting from 9) Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1664517699-1085-3-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
6c0eb5ba35 |
ACPI: make remove callback of ACPI driver void
For bus-based driver, device removal is implemented as:
1 device_remove()->
2 bus->remove()->
3 driver->remove()
Driver core needs no inform from callee(bus driver) about the
result of remove callback. In that case, commit
|
||
![]() |
25c94b0515 |
Drivers: hv: vmbus: fix possible memory leak in vmbus_device_register()
If device_register() returns error in vmbus_device_register(),
the name allocated by dev_set_name() must be freed. As comment
of device_register() says, it should use put_device() to give
up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup().
Fixes:
|
||
![]() |
f92a4b50f0 |
Drivers: hv: vmbus: fix double free in the error path of vmbus_add_channel_work()
In the error path of vmbus_device_register(), device_unregister()
is called, which calls vmbus_device_release(). The latter frees
the struct hv_device that was passed in to vmbus_device_register().
So remove the kfree() in vmbus_add_channel_work() to avoid a double
free.
Fixes:
|
||
![]() |
224b744abf |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
include/linux/bpf.h |
||
![]() |
e5dfd093ec |
clocksource/drivers/hyper-v: Include asm/hyperv-tlfs.h not asm/mshyperv.h
clocksource/hyperv_timer.h is included into the VDSO build. It includes asm/mshyperv.h which in turn includes the world and some more. This worked so far by chance, but any subtle change in the include chain results in a build breakage because VDSO builds are building user space libraries. Include asm/hyperv-tlfs.h instead which contains everything what the VDSO build needs except the hv_get_raw_timer() define. Move this define into a separate header file, which contains the prerequisites (msr.h) and is included by clocksource/hyperv_timer.h. Fixup drivers/hv/vmbus_drv.c which relies on the indirect include of asm/mshyperv.h. With that the VDSO build only pulls in the minimum requirements. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/87fsemtut0.ffs@tglx |
||
![]() |
73aa29a2b1 |
drivers: convert unsupported .adjfreq to .adjfine
A few PTP drivers implement a .adjfreq handler which indicates the operation is not supported. Convert all of these to .adjfine. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Cc: Vivek Thampi <vithampi@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
![]() |
99632e3dbe |
Drivers: hv: fix repeated words in comments
Delete the redundant word 'of'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20221019125604.52999-1-yuanjilin@cdjrlc.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
0e0073eb1b |
hyperv-next for 6.1
-----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmNDMCsTHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXpmUB/4k6V0JlLc9kxClxK8KCzAasby5hnGz EPOXyFi6ff1CSiMdpV+oWh/ENQr8lSQYsj6esMNNRr4DLDJ9o6NGtdK05HzizCjs KwHlvjF0eRsr60zSIySdeAwPyEyupqcpkLSF6oGi53f6OQuC2LDQa/h7FMnSKgxD TFzkWbFAf1kl/nQTUenxTh+u16umaKsedrD9tQli1vIyhltQbu9Hw2gAV1vWxdKO Md6BRwaMMz5Lffs6eM2ULlyxNzK1Pk1LWdPeNVHHIeBVxI+YMememFCOA5BBXLXk QlVGIPtbyHtryK9DRFyhk9UWgdAZIBCDHxBOqXXySOGA+Kc7/DK5zCeB =f55l -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed-20221009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - Remove unnecessary delay while probing for VMBus (Stanislav Kinsburskiy) - Optimize vmbus_on_event (Saurabh Sengar) - Fix a race in Hyper-V DRM driver (Saurabh Sengar) - Miscellaneous clean-up patches from various people * tag 'hyperv-next-signed-20221009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Replace kmap() with kmap_local_page() drm/hyperv: Add ratelimit on error message hyperv: simplify and rename generate_guest_id Drivers: hv: vmbus: Split memcpy of flex-array scsi: storvsc: remove an extraneous "to" in a comment Drivers: hv: vmbus: Don't wait for the ACPI device upon initialization Drivers: hv: vmbus: Use PCI_VENDOR_ID_MICROSOFT for better discoverability Drivers: hv: vmbus: Fix kernel-doc drm/hyperv: Don't overwrite dirt_needed value set by host Drivers: hv: vmbus: Optimize vmbus_on_event |
||
![]() |
80487a37de |
Merge branch 'acpi-dev'
Merge changes regarding the management of ACPI device objects for 6.1-rc1: - Rename ACPI device object reference counting functions (Rafael Wysocki). - Rearrange ACPI device object initialization code (Rafael Wysocki). - Drop parent field from struct acpi_device (Rafael Wysocki). - Extend the the int3472-tps68470 driver to support multiple consumers of a single TPS68470 along with the requisite framework-level support (Daniel Scally). * acpi-dev: platform/x86: int3472: Add board data for Surface Go2 IR camera platform/x86: int3472: Support multiple gpio lookups in board data platform/x86: int3472: Support multiple clock consumers ACPI: bus: Add iterator for dependent devices ACPI: scan: Add acpi_dev_get_next_consumer_dev() ACPI: property: Use acpi_dev_parent() ACPI: Drop redundant acpi_dev_parent() header ACPI: PM: Fix NULL argument handling in acpi_device_get/set_power() ACPI: Drop parent field from struct acpi_device ACPI: scan: Eliminate __acpi_device_add() ACPI: scan: Rearrange initialization of ACPI device objects ACPI: scan: Rename acpi_bus_get_parent() and rearrange it ACPI: Rename acpi_bus_get/put_acpi_device() |
||
![]() |
fb2d14add4 |
Drivers: hv: vmbus: Split memcpy of flex-array
To work around a misbehavior of the compiler's ability to see into composite flexible array structs (as detailed in the coming memcpy() hardening series[1]), split the memcpy() of the header and the payload so no false positive run-time overflow warning will be generated. This results in the already inlined memcpy getting unrolled a little more, which very slightly increases text size: $ size drivers/hv/vmbus_drv.o.before drivers/hv/vmbus_drv.o text data bss dec hex filename 22968 5239 232 28439 6f17 drivers/hv/vmbus_drv.o.before 23032 5239 232 28503 6f57 drivers/hv/vmbus_drv.o Avoids the run-time false-positive warning: memcpy: detected field-spanning write (size 212) of single field "&ctx->msg" at drivers/hv/vmbus_drv.c:1133 (size 16) [1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org/ Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Cc: linux-hyperv@vger.kernel.org Reported-by: Nathan Chancellor <nathan@kernel.org> Reported-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220927211736.3241175-1-keescook@chromium.org Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
f7ac541e18 |
Drivers: hv: vmbus: Don't wait for the ACPI device upon initialization
Waiting to 5 seconds in case of missing VMBus ACPI device is redundant as the device is either present already or won't be available at all. This patch enforces synchronous probing to make sure the bus traversal, happening upon driver registering will either find the device (if present) or not spend any additional time if device is absent. Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Stephen Hemminger <sthemmin@microsoft.com> CC: Wei Liu <wei.liu@kernel.org> CC: Dexuan Cui <decui@microsoft.com> CC: linux-hyperv@vger.kernel.org CC: linux-kernel@vger.kernel.org Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/166378554568.581670.1124852716698789244.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
a99aaf2e3b |
Drivers: hv: vmbus: Use PCI_VENDOR_ID_MICROSOFT for better discoverability
pci_ids.h already defines PCI_VENDOR_ID_MICROSOFT, and is included via linux/pci.h. Use the define instead of the magic number. Signed-off-by: Easwar Hariharan <easwar.hariharan@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1663625084-2518-2-git-send-email-eahariha@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
e1a863cddb |
Drivers: hv: vmbus: Fix kernel-doc
drivers/hv/vmbus_drv.c:1587: warning: expecting prototype for __vmbus_child_driver_register(). Prototype was for __vmbus_driver_register() instead. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2210 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220919063815.1881-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
78c65f0f3c |
Drivers: hv: vmbus: Optimize vmbus_on_event
In the vmbus_on_event loop, 2 jiffies timer will not serve the purpose if callback_fn takes longer. For effective use move this check inside of callback functions where needed. Out of all the VMbus drivers using vmbus_on_event, only storvsc has a high packet volume, thus add this limit only in storvsc callback for now. There is no apparent benefit of loop itself because this tasklet will be scheduled anyway again if there are packets left in ring buffer. This patch removes this unnecessary loop as well. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1658741848-4210-1-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
f0880e2cb7 |
Drivers: hv: Never allocate anything besides framebuffer from framebuffer memory region
Passed through PCI device sometimes misbehave on Gen1 VMs when Hyper-V DRM driver is also loaded. Looking at IOMEM assignment, we can see e.g. $ cat /proc/iomem ... f8000000-fffbffff : PCI Bus 0000:00 f8000000-fbffffff : 0000:00:08.0 f8000000-f8001fff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe ... fe0000000-fffffffff : PCI Bus 0000:00 fe0000000-fe07fffff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe fe0000000-fe07fffff : 2ba2:00:02.0 fe0000000-fe07fffff : mlx4_core the interesting part is the 'f8000000' region as it is actually the VM's framebuffer: $ lspci -v ... 0000:00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller]) Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f8000000 (32-bit, non-prefetchable) [size=64M] ... hv_vmbus: registering driver hyperv_drm hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Synthvid Version major 3, minor 5 hyperv_drm 0000:00:08.0: vgaarb: deactivate vga console hyperv_drm 0000:00:08.0: BAR 0: can't reserve [mem 0xf8000000-0xfbffffff] hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Cannot request framebuffer, boot fb still active? Note: "Cannot request framebuffer" is not a fatal error in hyperv_setup_gen1() as the code assumes there's some other framebuffer device there but we actually have some other PCI device (mlx4 in this case) config space there! The problem appears to be that vmbus_allocate_mmio() can use dedicated framebuffer region to serve any MMIO request from any device. The semantics one might assume of a parameter named "fb_overlap_ok" aren't implemented because !fb_overlap_ok essentially has no effect. The existing semantics are really "prefer_fb_overlap". This patch implements the expected and needed semantics, which is to not allocate from the frame buffer space when !fb_overlap_ok. Note, Gen2 VMs are usually unaffected by the issue because framebuffer region is already taken by EFI fb (in case kernel supports it) but Gen1 VMs may have this region unclaimed by the time Hyper-V PCI pass-through driver tries allocating MMIO space if Hyper-V DRM/FB drivers load after it. Devices can be brought up in any sequence so let's resolve the issue by always ignoring 'fb_mmio' region for non-FB requests, even if the region is unclaimed. Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20220827130345.1320254-4-vkuznets@redhat.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
2a8a8afba0 |
Drivers: hv: Always reserve framebuffer region for Gen1 VMs
vmbus_reserve_fb() tries reserving framebuffer region iff 'screen_info.lfb_base' is set. Gen2 VMs seem to have it set by EFI and/or by the kernel EFI FB driver (or, in some edge cases like kexec, the address where the buffer was moved, see https://lore.kernel.org/all/20201014092429.1415040-1-kasong@redhat.com/) but on Gen1 VM it depends on bootloader behavior. With grub, it depends on 'gfxpayload=' setting but in some cases it is observed to be zero. That being said, relying on 'screen_info.lfb_base' to reserve framebuffer region is risky. For Gen1 VMs, it should always be possible to get the address from the dedicated PCI device instead. Check for legacy PCI video device presence and reserve the whole region for framebuffer on Gen1 VMs. Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20220827130345.1320254-3-vkuznets@redhat.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
676576d164 |
Drivers: hv: remove duplicate word in a comment
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com> Link: https://lore.kernel.org/r/20220904154808.26022-1-dengshaomin@cdjrlc.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
62fcb99bdf |
ACPI: Drop parent field from struct acpi_device
The parent field in struct acpi_device is, in fact, redundant, because the dev.parent field in it effectively points to the same object and it is used by the driver core. Accordingly, the parent field can be dropped from struct acpi_device and for this purpose define acpi_dev_parent() to retrieve a parent struct acpi_device pointer from the dev.parent field in struct acpi_device. Next, update all of the users of the parent field in struct acpi_device to use acpi_dev_parent() instead of it and drop it. While at it, drop the ACPI_IS_ROOT_DEVICE() macro that is only used in one place in a confusing way. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Wei Liu <wei.liu@kernel.org> Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com> |
||
![]() |
d180e0a1be |
Drivers: hv: Create debugfs file with hyper-v balloon usage information
Allow the guest to know how much it is ballooned by the host. It is useful when debugging out of memory conditions. When host gets back memory from the guest it is accounted as used memory in the guest but the guest have no way to know how much it is actually ballooned. Expose current state, flags and max possible memory to the guest. While at it - fix a 10+ years old typo. Signed-off-by: Alexander Atanasov <alexander.atanasov@virtuozzo.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220711181825.52318-1-alexander.atanasov@virtuozzo.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
52be93558a |
Drivers: hv: vm_bus: Handle vmbus rescind calls after vmbus is suspended
Add a flag to indicate that the vmbus is suspended so we should ignore any offer message. Add a new work_queue for rescind msg, so we could drain it along with other offer work_queues upon suspension. It was observed that in some hibernation related scenario testing, after vmbus_bus_suspend() we get rescind offer message for the vmbus. This would lead to processing of a rescind message for a channel that has already been suspended. Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220711041147.GA5569@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
656c5ba50b |
Drivers: hv: vmbus: Release cpu lock in error case
In case of invalid sub channel, release cpu lock before returning.
Fixes:
|
||
![]() |
92ec746bce |
Drivers: hv: Fix syntax errors in comments
Delete the redundant word 'in'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220605085524.11289-1-wangxiang@cdjrlc.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
6640b5df1a |
Drivers: hv: vmbus: Don't assign VMbus channel interrupts to isolated CPUs
When initially assigning a VMbus channel interrupt to a CPU, don’t choose a managed IRQ isolated CPU (as specified on the kernel boot line with parameter 'isolcpus=managed_irq,<#cpu>'). Also, when using sysfs to change the CPU that a VMbus channel will interrupt, don't allow changing to a managed IRQ isolated CPU. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1653637439-23060-1-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
500a434fc5 |
Driver core changes for 5.19-rc1
Here is the set of driver core changes for 5.19-rc1. Note, I'm not really happy with this pull request as-is, see below for details, but overall this is all good for everything but a small set of systems, which we have a fix for already. Lots of tiny driver core changes and cleanups happened this cycle, but the two major things were: - firmware_loader reorganization and additions including the ability to have XZ compressed firmware images and the ability for userspace to initiate the firmware load when it needs to, instead of being always initiated by the kernel. FPGA devices specifically want this ability to have their firmware changed over the lifetime of the system boot, and this allows them to work without having to come up with yet-another-custom-uapi interface for loading firmware for them. - physical location support added to sysfs so that devices that know this information, can tell userspace where they are located in a common way. Some ACPI devices already support this today, and more bus types should support this in the future. Smaller changes included: - driver_override api cleanups and fixes - error path cleanups and fixes - get_abi script fixes - deferred probe timeout changes. It's that last change that I'm the most worried about. It has been reported to cause boot problems for a number of systems, and I have a tested patch series that resolves this issue. But I didn't get it merged into my tree before 5.18-final came out, so it has not gotten any linux-next testing. I'll send the fixup patches (there are 2) as a follow-on series to this pull request if you want to take them directly, _OR_ I can just revert the probe timeout changes and they can wait for the next -rc1 merge cycle. Given that the fixes are tested, and pretty simple, I'm leaning toward that choice. Sorry this all came at the end of the merge window, I should have resolved this all 2 weeks ago, that's my fault as it was in the middle of some travel for me. All have been tested in linux-next for weeks, with no reported issues other than the above-mentioned boot time outs. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnv/A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yk/fACgvmenbo5HipqyHnOmTQlT50xQ9EYAn2eTq6ai GkjLXBGNWOPBa5cU52qf =yEi/ -----END PGP SIGNATURE----- Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.19-rc1. Lots of tiny driver core changes and cleanups happened this cycle, but the two major things are: - firmware_loader reorganization and additions including the ability to have XZ compressed firmware images and the ability for userspace to initiate the firmware load when it needs to, instead of being always initiated by the kernel. FPGA devices specifically want this ability to have their firmware changed over the lifetime of the system boot, and this allows them to work without having to come up with yet-another-custom-uapi interface for loading firmware for them. - physical location support added to sysfs so that devices that know this information, can tell userspace where they are located in a common way. Some ACPI devices already support this today, and more bus types should support this in the future. Smaller changes include: - driver_override api cleanups and fixes - error path cleanups and fixes - get_abi script fixes - deferred probe timeout changes. It's that last change that I'm the most worried about. It has been reported to cause boot problems for a number of systems, and I have a tested patch series that resolves this issue. But I didn't get it merged into my tree before 5.18-final came out, so it has not gotten any linux-next testing. I'll send the fixup patches (there are 2) as a follow-on series to this pull request. All have been tested in linux-next for weeks, with no reported issues other than the above-mentioned boot time-outs" * tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) driver core: fix deadlock in __device_attach kernfs: Separate kernfs_pr_cont_buf and rename_lock. topology: Remove unused cpu_cluster_mask() driver core: Extend deferred probe timeout on driver registration MAINTAINERS: add Russ Weight as a firmware loader maintainer driver: base: fix UAF when driver_attach failed test_firmware: fix end of loop test in upload_read_show() driver core: location: Add "back" as a possible output for panel driver core: location: Free struct acpi_pld_info *pld driver core: Add "*" wildcard support to driver_async_probe cmdline param driver core: location: Check for allocations failure arch_topology: Trace the update thermal pressure kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file. export: fix string handling of namespace in EXPORT_SYMBOL_NS rpmsg: use local 'dev' variable rpmsg: Fix calling device_lock() on non-initialized device firmware_loader: describe 'module' parameter of firmware_upload_register() firmware_loader: Move definitions from sysfs_upload.h to sysfs.h firmware_loader: Fix configs for sysfs split selftests: firmware: Add firmware upload selftests ... |
||
![]() |
d27423bf04 |
hv_balloon: Fix balloon_probe() and balloon_remove() error handling
Add missing cleanup in balloon_probe() if the call to balloon_connect_vsp() fails. Also correctly handle cleanup in balloon_remove() when dm_state is DM_INIT_ERROR because balloon_resume() failed. Signed-off-by: Shradha Gupta <shradhagupta@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220516045058.GA7933@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
1940f9f81d |
Drivers: hv: vmbus: fix typo in comment
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220521111145.81697-60-Julia.Lawall@inria.fr Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
a6b94c6b49 |
Drivers: hv: vmbus: Remove support for Hyper-V 2008 and Hyper-V 2008R2/Win7
The VMbus driver has special case code for running on the first released versions of Hyper-V: 2008 and 2008 R2/Windows 7. These versions are now out of support (except for extended security updates) and lack the performance features needed for effective production usage of Linux guests. Simplify the code by removing the negotiation of the VMbus protocol versions required for these releases of Hyper-V, and by removing the special case code for handling these VMbus protocol versions. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/1651509391-2058-2-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
1c9de08f7f |
Drivers: hv: vmbus: Refactor the ring-buffer iterator functions
With no users of hv_pkt_iter_next_raw() and no "external" users of hv_pkt_iter_first_raw(), the iterator functions can be refactored and simplified to remove some indirection/code. Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220428145107.7878-6-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
da795eb239 |
Drivers: hv: vmbus: Accept hv_sock offers in isolated guests
So that isolated guests can communicate with the host via hv_sock channels. Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220428145107.7878-5-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
b91eaf7267 |
Drivers: hv: vmbus: Introduce {lock,unlock}_requestor()
To abtract the lock and unlock operations on the requestor spin lock. The helpers will come in handy in hv_pci. No functional change. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220419122325.10078-6-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
0aadb6a7bb |
Drivers: hv: vmbus: Introduce vmbus_request_addr_match()
The function can be used to retrieve and clear/remove a transation ID from a channel requestor, provided the memory address corresponding to the ID equals a specified address. The function, and its 'lockless' variant __vmbus_request_addr_match(), will be used by hv_pci. Refactor vmbus_request_addr() to reuse the 'newly' introduced code. No functional change. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220419122325.10078-5-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
b03afa57c6 |
Drivers: hv: vmbus: Introduce vmbus_sendpacket_getid()
The function can be used to send a VMbus packet and retrieve the corresponding transaction ID. It will be used by hv_pci. No functional change. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220419122325.10078-4-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
![]() |
82cd4bacff |
Drivers: hv: vmbus: Fix handling of messages with transaction ID of zero
vmbus_request_addr() returns 0 (zero) if the transaction ID passed to as argument is 0. This is unfortunate for two reasons: first, netvsc_send_completion() does not check for a NULL cmd_rqst (before dereferencing the corresponding NVSP message); second, 0 is a *valid* value of cmd_rqst in netvsc_send_tx_complete(), cf. the call of vmbus_sendpacket() in netvsc_send_pkt(). vmbus_request_addr() has included the code in question since its introduction with commit |
||
![]() |
66200bbcde |
Drivers: hv: vmbus: Add VMbus IMC device to unsupported list
Hyper-V may offer an Initial Machine Configuration (IMC) synthetic device to guest VMs. The device may be used by Windows guests to get specialization information, such as the hostname. But the device is not used in Linux and there is no Linux driver, so it is unsupported. Currently, the IMC device GUID is not recognized by the VMbus driver, which results in an "Unknown GUID" error message during boot. Add the GUID to the list of known but unsupported devices so that the error message is not generated. Other than avoiding the error message, there is no change in guest behavior. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1649818140-100953-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |