Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
-----BEGIN PGP SIGNATURE-----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=cBvC
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2023022201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- HID-BPF infrastructure: this allows to start using HID-BPF. Note that
the mechanism to ship HID-BPF program through the kernel tree is
still not implemented yet (but is planned).
This should be a no-op for 99% of users. Also we are gaining
kselftests for the HID tree (Benjamin Tissoires)
- Some UAF fixes in workers when using uhid (Pietro Borrello & Benjamin
Tissoires)
- Constify hid_ll_driver (Thomas Weißschuh)
- Allow more custom IIO sensors through HID (Philipp Jungkamp)
- Logitech HID++ fixes for scroll wheel, protocol and debug (Bastien
Nocera)
- Some new device support: Steam Deck (Vicki Pfau), UClogic (José
Expósito), Logitech G923 Xbox Edition steering wheel (Walt Holman),
EVision keyboards (Philippe Valembois)
- other assorted code cleanups and fixes
* tag 'for-linus-2023022201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (99 commits)
HID: mcp-2221: prevent UAF in delayed work
hid: bigben_probe(): validate report count
HID: asus: use spinlock to safely schedule workers
HID: asus: use spinlock to protect concurrent accesses
HID: bigben: use spinlock to safely schedule workers
HID: bigben_worker() remove unneeded check on report_field
HID: bigben: use spinlock to protect concurrent accesses
HID: logitech-hidpp: Add myself to authors
HID: logitech-hidpp: Retry commands when device is busy
HID: logitech-hidpp: Add more debug statements
HID: Add support for Logitech G923 Xbox Edition steering wheel
HID: logitech-hidpp: Add Signature M650
HID: logitech-hidpp: Remove HIDPP_QUIRK_NO_HIDINPUT quirk
HID: logitech-hidpp: Don't restart communication if not necessary
HID: logitech-hidpp: Add constants for HID++ 2.0 error codes
Revert "HID: logitech-hidpp: add a module parameter to keep firmware gestures"
HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support
HID: i2c-hid: goodix: Add mainboard-vddio-supply
dt-bindings: HID: i2c-hid: goodix: Add mainboard-vddio-supply
HID: i2c-hid: goodix: Stop tying the reset line to the regulator
...
- constify hid_ll_driver (Thomas Weißschuh)
- map standard Battery System Charging to upower (José Expósito)
- couple of assorted fixes and new handling of HID usages (Jingyuan
Liang & Ronald Tschalär)
Highlights:
- AMD PMC: Improvements to aid s2idle debugging
- Dell WMI-DDV: hwmon support
- INT3472 camera sensor power-management: Improve privacy LED support
- Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule Interface) support
- Mellanox: SN5600 and Nvidia L1 switch support
- Microsoft Surface Support: Various cleanups + code improvements
- tools/intel-speed-select: Various improvements
- Miscellaneous other cleanups / fixes
The following is an automated git shortlog grouped by driver:
Add include/linux/platform_data/x86 to MAINTAINERS:
- Add include/linux/platform_data/x86 to MAINTAINERS
Documentation/ABI:
- Add new attribute for mlxreg-io sysfs interfaces
Fix header inclusion in linux/platform_data/x86/soc.h:
- Fix header inclusion in linux/platform_data/x86/soc.h
HID:
- surface-hid: Use target-ID enum instead of hard-coding values
MAINTAINERS:
- dell-wmi-sysman: drop Divya Bharathi
- Add entry for TPMI driver
Merge tag 'ib-leds-led_get-v6.3' into HEAD:
- Merge tag 'ib-leds-led_get-v6.3' into HEAD
acerhdf:
- Drop empty platform remove function
apple_gmux:
- Drop no longer used ACPI_VIDEO Kconfig dependency
dell-ddv:
- Prefer asynchronous probing
- Add hwmon support
- Add "force" module param
- Replace EIO with ENOMSG
- Return error if buffer is empty
- Add support for interface version 3
dell-smo8800:
- Use min_t() for comparison and assignment
dell-wmi-sysman:
- Make kobj_type structure constant
hp-wmi:
- Ignore Win-Lock key events
int1092:
- Switch to use acpi_evaluate_dsm_typed()
int3472/discrete:
- add LEDS_CLASS dependency
- Drop unnecessary obj->type == string check
- Get the polarity from the _DSM entry
- Move GPIO request to skl_int3472_register_clock()
- Create a LED class device for the privacy LED
- Refactor GPIO to sensor mapping
intel:
- punit_ipc: Drop empty platform remove function
- oaktrail: Drop empty platform remove function
intel/pmc:
- Switch to use acpi_evaluate_dsm_typed()
leds:
- led-class: Add generic [devm_]led_get()
- led-class: Add __devm_led_get() helper
- led-class: Add led_module_get() helper
- led-class: Add missing put_device() to led_put()
media:
- v4l2-core: Make the v4l2-core code enable/disable the privacy LED if present
nvidia-wmi-ec-backlight:
- Add force module parameter
platform:
- mellanox: mlx-platform: Move bus shift assignment out of the loop
- mellanox: mlx-platform: Add mux selection register to regmap
- mellanox: Extend all systems with I2C notification callback
- mellanox: Split logic in init and exit flow
- mellanox: Split initialization procedure
- mellanox: Introduce support of new Nvidia L1 switch
- mellanox: Introduce support for next-generation 800GB/s switch
- mellanox: Cosmetic changes - rename to more common name
- mellanox: Change "reset_pwr_converter_fail" attribute
- mellanox: Introduce support for rack manager switch
platform/mellanox:
- mlxreg-hotplug: Allow more flexible hotplug events configuration
platform/surface:
- Switch to use acpi_evaluate_dsm_typed()
- aggregator: Rename top-level request functions to avoid ambiguities
- aggregator_registry: Fix target-ID of base-hub
- aggregator: Enforce use of target-ID enum in device ID macros
- dtx: Use target-ID enum instead of hard-coding values
- aggregator_tabletsw: Use target-ID enum instead of hard-coding values
- aggregator_hub: Use target-ID enum instead of hard-coding values
- aggregator: Add target and source IDs to command trace events
- aggregator: Improve documentation and handling of message target and source IDs
platform/x86/amd:
- pmc: Add line break for readability
- pmc: differentiate STB/SMU messaging prints
- pmc: Write dummy postcode into the STB DRAM
- pmc: Add num_samples message id support to STB
platform/x86/amd/pmf:
- Add depends on CONFIG_POWER_SUPPLY
platform/x86/intel:
- Intel TPMI enumeration driver
platform/x86/intel/tpmi:
- ADD tpmi external interface for tpmi feature drivers
- Process CPU package mapping
platform/x86/intel/vsec:
- Use mutex for ida_alloc() and ida_free()
- Support private data
- Enhance and Export intel_vsec_add_aux()
- Add TPMI ID
platform_data/mlxreg:
- Add field with mapped resource address
think-lmi:
- Make kobj_type structure constant
- Use min_t() for comparison and assignment
tools/power/x86/intel-speed-select:
- v1.14 release
- Adjust uncore max/min frequency
- Add Emerald Rapid quirk
- Fix display of uncore min frequency
- turbo-freq auto mode with SMT off
- cpufreq reads on offline CPUs
- Use null-terminated string
- Remove duplicate dup()
- Handle open() failure case
- Remove unused non_block flag
- Remove wrong check in set_isst_id()
x86/platform/uv:
- Make kobj_type structure constant
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmPzRpgUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wYPwf+I6PP0XBg8MrivLc2DHklVojUU0aX
/M0LbCP8gxCDdyisV8swC3e848riaTchYlUGASPZu0ieas1U7KsDvghkiittNvlI
U+0h7TbkOQNymM8oE0oauflH4W5KwCXGrLsJWVkGk0lhJd6WmjXkjWLkruaXazLd
kc5fq0QyzRVzhhCtocQ7qhIgXSZyKYx433VqbDR7/SUi5F2wkC9JbGY02maKWaK3
4lQaoyMKLjGlDr9YVv+UHTwLoXwP0mW/fjlsZ3Xz5lz6WfihQzPuOrl/10mRj0Ez
eP9dlF1Dipee4BYS2FM5dtk5xPpqdVqRlQUX2qKzyDNTSx5wdtJnv8j/cg==
=VoXq
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD PMC: Improvements to aid s2idle debugging
- Dell WMI-DDV: hwmon support
- INT3472 camera sensor power-management: Improve privacy LED support
- Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule
Interface) support
- Mellanox: SN5600 and Nvidia L1 switch support
- Microsoft Surface Support: Various cleanups + code improvements
- tools/intel-speed-select: Various improvements
- Miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
platform/x86: nvidia-wmi-ec-backlight: Add force module parameter
platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY
platform/x86: dell-ddv: Prefer asynchronous probing
platform/x86: dell-ddv: Add hwmon support
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: mlx-platform: Move bus shift assignment out of the loop
platform: mellanox: mlx-platform: Add mux selection register to regmap
platform_data/mlxreg: Add field with mapped resource address
platform/mellanox: mlxreg-hotplug: Allow more flexible hotplug events configuration
platform: mellanox: Extend all systems with I2C notification callback
platform: mellanox: Split logic in init and exit flow
platform: mellanox: Split initialization procedure
platform: mellanox: Introduce support of new Nvidia L1 switch
platform: mellanox: Introduce support for next-generation 800GB/s switch
platform: mellanox: Cosmetic changes - rename to more common name
platform: mellanox: Change "reset_pwr_converter_fail" attribute
platform: mellanox: Introduce support for rack manager switch
MAINTAINERS: dell-wmi-sysman: drop Divya Bharathi
x86/platform/uv: Make kobj_type structure constant
platform/x86: think-lmi: Make kobj_type structure constant
...
* New drivers
- Driver cros_ec_uart for ChromeOS EC protocol over UART.
- Driver cros_typec_vdm for USB PD Vendor Defined Message.
* Improvements
- Preserve logs as much as possible when EC panic.
- Shutdown to refrain from potential HW damages when EC panic.
* Fixes
- Fix DP_PORT_VDO to include DP_CAP_RECEPTACLE.
- Fix a lockdep false positive.
* Cleanups
- Use sysfs_emit*() instead of scnprintf().
- Use asm instead of asm-generic for unaligned.h.
* Misc
- Rename module name from cros_ec_typec to cros-ec-typec.
- Minor fixes.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCY+n3NxMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0aF8A/RBFKFEJrKj1AkPlgSHnhCr41SmEsrqg
MaAH2x6Nw8YqAQCjSbJmanSzOHCO5HXF1P11elTNgqH0KT6/Xw/LIcL5Dw==
=pAno
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New drivers:
- cros_ec_uart for ChromeOS EC protocol over UART
- cros_typec_vdm for USB PD Vendor Defined Message
Improvements:
- Preserve logs as much as possible when EC panics
- Shutdown to refrain from potential HW damages when EC panics
Fixes:
- Fix DP_PORT_VDO to include DP_CAP_RECEPTACLE
- Fix a lockdep false positive
Cleanups:
- Use sysfs_emit*() instead of scnprintf()
- Use asm instead of asm-generic for unaligned.h
Misc:
- Rename module name from cros_ec_typec to cros-ec-typec
- Minor fixes"
* tag 'tag-chrome-platform-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (34 commits)
platform/chrome: cros_ec_typec: Fix spelling mistake
platform/chrome: cros_typec_vdm: Add Attention support
platform/chrome: cros_ec: Add VDM attention headers
platform/chrome: cros_typec_vdm: Fix VDO copy
platform/chrome: cros_ec_typec: allow deferred probe of switch handles
platform/chrome: cros_ec_proto: remove big stub objects from stack
platform/chrome: cros_ec_uart: fix negative type promoted to high
platform/chrome: cros_ec: Use per-device lockdep key
platform/chrome: fix kernel-doc warnings for cros_ec_command
platform/chrome: fix kernel-doc warning for last_resume_result
platform/chrome: fix kernel-doc warning for suspend_timeout_ms
platform/chrome: fix kernel-doc warnings for panic notifier
platform/chrome: cros_ec_lpc: initialize the buf variable
platform/chrome: cros_ec: Fix panic notifier registration
platform/chrome: cros_typec_switch: Check for retimer flag
platform/chrome: cros_typec_switch: Use fwnode* prop check
platform/chrome: cros_typec_vdm: Add VDM send support
platform/chrome: cros_typec_vdm: Add VDM reply support
platform/chrome: cros_ec_typec: Add initial VDM support
platform/chrome: cros_ec_typec: Alter module name with hyphens
...
- Rework a large bunch of drivers to use the generic thermal trip
structure and use the opportunity to do more cleanups by removing
unused functions from the OF code (Daniel Lezcano).
- Remove core header inclusion from drivers (Daniel Lezcano).
- Fix some locking issues related to the generic thermal trip rework
(Johan Hovold).
- Fix a crash when requesting the critical temperature on tegra, which
is related to the generic trip point work (Jon Hunter).
- Clean up thermal device unregistration code (Viresh Kumar).
- Fix and clean up thermal control core initialization error code
paths (Daniel Lezcano).
- Relocate the trip points handling code into a separate file (Daniel
Lezcano).
- Make the thermal core fail registration of thermal zones and cooling
devices if the thermal class has not been registered (Rafael Wysocki).
- Add trip point initialization helper functions for ACPI-defined trip
points and modify two thermal drivers to use them (Rafael Wysocki,
Daniel Lezcano).
- Make the core thermal control code use sysfs_emit_at() instead of
scnprintf() where applicable (ye xingchen).
- Consolidate code accessing the Intel TCC (Thermal Control Circuitry)
MSRs by introducing library functions for that and making the
TCC-related code in thermal drivers use them (Zhang Rui).
- Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax
changes (Zhang Rui).
- Address an "unsigned expression compared with zero" warning in the
intel_soc_dts_iosf thermal driver (Yang Li).
- Update comments regarding two functions in the Intel Menlow thermal
driver (Deming Wang).
- Use sysfs_emit_at() instead of scnprintf() in the int340x thermal
driver (ye xingchen).
- Make the intel_pch thermal driver support the Wellsburg PCH (Tim
Zimmermann).
- Modify the intel_pch and processor_thermal_device_pci thermal drivers
use generic trip point tables instead of thermal zone trip point
callbacks (Daniel Lezcano).
- Add production mode attribute sysfs attribute to the int340x thermal
driver (Srinivas Pandruvada).
- Rework dynamic trip point updates handling and locking in the int340x
thermal driver (Rafael Wysocki).
- Make the int340x thermal driver use a generic trip points table
instead of thermal zone trip point callbacks (Rafael Wysocki, Daniel
Lezcano).
- Clean up and improve the int340x thermal driver (Rafael Wysocki).
- Simplify and clean up the intel_pch thermal driver (Rafael Wysocki).
- Fix the Intel powerclamp thermal driver and make it use the common
idle injection framework (Srinivas Pandruvada).
- Add two module parameters, cpumask and max_idle, to the Intel powerclamp
thermal driver to allow it to affect only a specific subset of CPUs
instead of all of them (Srinivas Pandruvada).
- Make the Intel quark_dts thermal driver Use generic trip point
objects instead of its own trip point representation (Daniel
Lezcano).
- Add toctree entry for thermal documents and fix two issues in the
Intel powerclamp driver documentation (Bagas Sanjaya).
- Use strscpy() to instead of strncpy() in the thermal core (Xu Panda).
- Fix thermal_sampling_exit() (Vincent Guittot).
- Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam Chihi).
- Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert
Uytterhoeven).
- Fix useless call to set_trips() when resuming in the rcar_gen3
thermal control driver and add interrupt support detection at init
time to it (Niklas Söderlund).
- Fix memory corruption in the hi3660 thermal driver (Yongqin Liu).
- Fix include path for libnl3 in pkg-config file for libthermal (Vibhav
Pant).
- Remove syscfg-based driver for st as the platform is not supported
any more (Alain Volmat).
-----BEGIN PGP SIGNATURE-----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=tZwm
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"The majority of changes here are related to the general switch-over to
using arrays of generic trip point structures registered along with a
thermal zone instead of trip point callbacks (this has been done
mostly by Daniel Lezcano with some help from yours truly on the Intel
drivers front).
Apart from that and the related reorganization of code, there are some
enhancements of the existing driver and a new Mediatek Low Voltage
Thermal Sensor (LVTS) driver. The Intel powerclamp undergoes a major
rework so it will use the generic idle_inject facility for CPU idle
time injection going forward and it will take additional module
parameters for specifying the subset of CPUs to be affected by it
(work done by Srinivas Pandruvada).
Also included are assorted fixes and a whole bunch of cleanups.
Specifics:
- Rework a large bunch of drivers to use the generic thermal trip
structure and use the opportunity to do more cleanups by removing
unused functions from the OF code (Daniel Lezcano)
- Remove core header inclusion from drivers (Daniel Lezcano)
- Fix some locking issues related to the generic thermal trip rework
(Johan Hovold)
- Fix a crash when requesting the critical temperature on tegra,
which is related to the generic trip point work (Jon Hunter)
- Clean up thermal device unregistration code (Viresh Kumar)
- Fix and clean up thermal control core initialization error code
paths (Daniel Lezcano)
- Relocate the trip points handling code into a separate file (Daniel
Lezcano)
- Make the thermal core fail registration of thermal zones and
cooling devices if the thermal class has not been registered
(Rafael Wysocki)
- Add trip point initialization helper functions for ACPI-defined
trip points and modify two thermal drivers to use them (Rafael
Wysocki, Daniel Lezcano)
- Make the core thermal control code use sysfs_emit_at() instead of
scnprintf() where applicable (ye xingchen)
- Consolidate code accessing the Intel TCC (Thermal Control
Circuitry) MSRs by introducing library functions for that and
making the TCC-related code in thermal drivers use them (Zhang Rui)
- Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax
changes (Zhang Rui)
- Address an "unsigned expression compared with zero" warning in the
intel_soc_dts_iosf thermal driver (Yang Li)
- Update comments regarding two functions in the Intel Menlow thermal
driver (Deming Wang)
- Use sysfs_emit_at() instead of scnprintf() in the int340x thermal
driver (ye xingchen)
- Make the intel_pch thermal driver support the Wellsburg PCH (Tim
Zimmermann)
- Modify the intel_pch and processor_thermal_device_pci thermal
drivers use generic trip point tables instead of thermal zone trip
point callbacks (Daniel Lezcano)
- Add production mode attribute sysfs attribute to the int340x
thermal driver (Srinivas Pandruvada)
- Rework dynamic trip point updates handling and locking in the
int340x thermal driver (Rafael Wysocki)
- Make the int340x thermal driver use a generic trip points table
instead of thermal zone trip point callbacks (Rafael Wysocki,
Daniel Lezcano)
- Clean up and improve the int340x thermal driver (Rafael Wysocki)
- Simplify and clean up the intel_pch thermal driver (Rafael Wysocki)
- Fix the Intel powerclamp thermal driver and make it use the common
idle injection framework (Srinivas Pandruvada)
- Add two module parameters, cpumask and max_idle, to the Intel
powerclamp thermal driver to allow it to affect only a specific
subset of CPUs instead of all of them (Srinivas Pandruvada)
- Make the Intel quark_dts thermal driver Use generic trip point
objects instead of its own trip point representation (Daniel
Lezcano)
- Add toctree entry for thermal documents and fix two issues in the
Intel powerclamp driver documentation (Bagas Sanjaya)
- Use strscpy() to instead of strncpy() in the thermal core (Xu
Panda)
- Fix thermal_sampling_exit() (Vincent Guittot)
- Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam
Chihi)
- Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert
Uytterhoeven)
- Fix useless call to set_trips() when resuming in the rcar_gen3
thermal control driver and add interrupt support detection at init
time to it (Niklas Söderlund)
- Fix memory corruption in the hi3660 thermal driver (Yongqin Liu)
- Fix include path for libnl3 in pkg-config file for libthermal
(Vibhav Pant)
- Remove syscfg-based driver for st as the platform is not supported
any more (Alain Volmat)"
* tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (135 commits)
thermal/drivers/st: Remove syscfg based driver
thermal: Remove core header inclusion from drivers
tools/lib/thermal: Fix include path for libnl3 in pkg-config file.
thermal/drivers/hisi: Drop second sensor hi3660
thermal/drivers/rcar_gen3_thermal: Fix device initialization
thermal/drivers/rcar_gen3_thermal: Create device local ops struct
thermal/drivers/rcar_gen3_thermal: Do not call set_trips() when resuming
thermal/drivers/rcar_gen3: Add support for R-Car V4H
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 support
thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver
dt-bindings: thermal: mediatek: Add LVTS thermal controllers
thermal/drivers/mediatek: Relocate driver to mediatek folder
tools/lib/thermal: Fix thermal_sampling_exit()
Documentation: powerclamp: Fix numbered lists formatting
Documentation: powerclamp: Escape wildcard in cpumask description
Documentation: admin-guide: Add toctree entry for thermal docs
thermal: intel: powerclamp: Add two module parameters
Documentation: admin-guide: Move intel_powerclamp documentation
thermal: core: Use sysfs_emit_at() instead of scnprintf()
thermal: intel: powerclamp: Fix duration module parameter
...
On some Lenovo Legion models, the backlight might be driven by either
one of nvidia_wmi_ec_backlight or amdgpu_bl0 at different times.
When the Nvidia WMI EC backlight interface reports the backlight is
controlled by the EC, the current backlight handling only registers
nvidia_wmi_ec_backlight (and registers no other backlight interfaces).
This hides (never registers) the amdgpu_bl0 interface, where as prior
to 6.1.4 users would have both nvidia_wmi_ec_backlight and amdgpu_bl0
and could work around things in userspace.
Add a force module parameter which can be used with acpi_backlight=native
to restore the old behavior as a workound (for now) by passing:
"acpi_backlight=native nvidia-wmi-ec-backlight.force=1"
Fixes: 8d0ca287fd ("platform/x86: nvidia-wmi-ec-backlight: Use acpi_video_get_backlight_type()")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217026
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Link: https://lore.kernel.org/r/20230217144208.5721-1-hdegoede@redhat.com
It is reported that amd_pmf driver is missing "depends on" for
CONFIG_POWER_SUPPLY causing the following build error.
ld: drivers/platform/x86/amd/pmf/core.o: in function `amd_pmf_remove':
core.c:(.text+0x10): undefined reference to `power_supply_unreg_notifier'
ld: drivers/platform/x86/amd/pmf/core.o: in function `amd_pmf_probe':
core.c:(.text+0x38f): undefined reference to `power_supply_reg_notifier'
make[1]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1
make: *** [Makefile:1248: vmlinux] Error 2
Add this to the Kconfig file.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217028
Fixes: c5258d39fc ("platform/x86/amd/pmf: Add helper routine to update SPS thermals")
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230213121457.1764463-1-Shyam-sundar.S-k@amd.com
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
During probe, both sensor buffers need to be queried to
initialize the hwmon channels. This might be slow on some
machines, causing a unnecessary delay during boot.
Mark the driver with PROBE_PREFER_ASYNCHRONOUS so that it
can be probed asynchronously.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230209211503.2739-3-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Thanks to bugreport 216655 on bugzilla triggered by the
dell-smm-hwmon driver, the contents of the sensor buffers
could be almost completely decoded.
Add an hwmon interface for exposing the fan and thermal
sensor values. Since the WMI interface can be quite slow
on some machines, the sensor buffers are cached for 1 second
to lessen the performance impact.
The debugfs interface remains in place to aid in reverse-engineering
of unknown sensor types and the thermal buffer.
Tested-by: Antonín Skala <skala.antonin@gmail.com>
Tested-by: Gustavo Walbon <gustavowalbon@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230209211503.2739-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move assignment of bus shift setting out of the loop to avoid redundant
operation.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-13-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Extend writeable, readable, volatile registers of the 'regmap' object
with for I2C mux selector registers.
The motivation is to pass this object extended with selector registers
to I2C mux driver working over ‘regmap’.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-12-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently hotplug configuration in logic device assumes that all items
are provided with no holes.
Thus, any group of hotplug events, associated with the specific
status/event/mask registers is configured in those registers
successively from bit zero to bit #n (#n < 8).
This logic is changed int order to allow non-successive definition to
support configuration with the skipped bits – for example bits 3, 5, 7
in status/event/mask registers can be associated with hotplug events,
while others can be skipped.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-10-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Motivation is to provide synchronization between I2C main bus and other
platform drivers using this notification callback.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-9-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Split logic in mlxplat_init()/mlxplat_exit() routines.
Separate initialization of I2C infrastructure and others platform
drivers.
Motivation is to provide synchronization between I2C bus and mux
drivers and other drivers using this infrastructure.
I2C main bus and MUX busses are implemented in FPGA logic. On some new
systems the numbers allocated for these busses could be variable
depending on order of initialization of I2C native busses. Since bus
numbers are passed to some other platform drivers during initialization
flow, it is necessary to synchronize completion of I2C infrastructure
drivers and activation of rest of drivers.
Thus initialization flow will be performed in synchronized order.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-8-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Split mlxplat_init() into two by adding mlxplat_pre_init().
Motivation is to prepare 'mlx-platform' driver to support systems
equipped PCIe based programming logic device.
Such systems are supposed to use different system resources, thus this
commit separates resources allocation related code.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-7-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for new L1 switch nodes providing L1 connectivity for
multi-node networking chassis.
The purpose is to provide compute server with full management and IO
subsystems with connections to L1 switches.
System contains the following components:
- COMe module based on Intel Coffee Lake CPU
- Switch baseboard with two ASICs, while
24 ports of each ASICs are connected to one backplane connector
32 ports of each ASIC are connected to 8 OSFPs
- Integrated 60mm dual-rotor FANs inside L1 node (N+2 redundancy)
- Support 48V or 54V DC input from the external power server.
Add the structures related to the new systems to allow proper activation
of the all required platform driver.
Add poweroff callback to support deep power cycle flow, which should
include special actions against CPLD device for performing graceful
operation.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-6-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Introduce support for Nvidia next-generation 800GB/s ethernet switch
SN5600.
SN5600 is 51.2 Tbps Ethernet switch based on Nvidia Spectrum-4 ASIC.
It can provide up to 64x800Gb/s (ETH) full bidirectional bandwidth per
port using PAM-4 modulations. The system supports 64 Belly to Belly 2x4
OSFP cages.
The switch was designed to fit standard 2U racks.
Features:
- 64 OSFP ports support 800GbE - 10GbE speed.
- Additional 25GbE - 1GbE service port on the front panel.
- Air-cooled with 3 + 1 redundant fan units.
- 1 + 1 redundant 3000W or 3600W PSUs.
- System management board is based on Intel Coffee-lake CPU E-2276
with secure-boot support.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-5-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Rename 'nvlink_blade' in several declaration to more common name
"chassis_blade", since these names are going to be used for different
kinds of blades.
Fix 'swicth' to 'switch' in comment.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-4-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Change "reset_voltmon_upgrade_fail" attribute name to
"reset_pwr_converter_fail".
For systems using "mlxplat_mlxcpld_default_ng_regs_io_data", relevant
CPLD 'register.bit' indicates the failure of power converter, while on
older systems same 'register.bit' indicates failure of voltage monitor
devices upgrade failure.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-3-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The rack switch is designed to provide high bandwidth, low latency
connectivity using optical fiber as the primary interconnect.
System supports 32 OSFP ports, non-blocking switching capacity of
25.6Tbps.
System equipped with:
- 2 replaceable power supplies (AC) with 1+1 redundancy model.
- 7 replaceable fan drawers with 6+1 redundancy model.
- 2 External Root of Trust or EROT (Glacier) devices for securing
ASICs firmware.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-2-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Justin Ernst <justin.ernst@hpe.com>
Link: https://lore.kernel.org/r/20230207-kobj_type-pdx86-v1-3-8e2c4fb83105@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230207-kobj_type-pdx86-v1-2-8e2c4fb83105@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230207-kobj_type-pdx86-v1-1-8e2c4fb83105@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ID alloc and free functions don't have in built protection for parallel
invocation of ida_alloc() and ida_free(). With the current flow in the
vsec driver, there is no such scenario. But add mutex protection for
potential future changes.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230207125821.3837799-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Modify the dynamic debug print to differentiate between the regular
and spill to DRAM usage of the SMU message port.
Suggested-by: Sanket Goswami <Sanket.Goswami@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230206150855.1938810-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Based on the recommendation from the PMFW team in order to get the
recent telemetry data present on the STB DRAM the driver is required
to send one dummy write to the STB buffer, so it internally triggers
the PMFW to emit the latest telemetry data in the STB DRAM region.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230206150855.1938810-3-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Recent PMFWs have the support for S2D_NUM_SAMPLES message ID that
can tell the current number of samples present within the STB DRAM.
num_samples returned would let the driver know the start of the read
from the last push location. This way, the driver would emit the
top most region of the STB DRAM.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230206150855.1938810-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
int3472 now fails to link when the LED support is disabled:
x86_64-linux-ld: drivers/platform/x86/intel/int3472/led.o: in function `skl_int3472_register_pled':
led.c:(.text+0xf4): undefined reference to `led_classdev_register_ext'
x86_64-linux-ld: led.c:(.text+0x131): undefined reference to `led_add_lookup'
x86_64-linux-ld: drivers/platform/x86/intel/int3472/led.o: in function `skl_int3472_unregister_pled':
led.c:(.text+0x16b): undefined reference to `led_remove_lookup'
x86_64-linux-ld: led.c:(.text+0x177): undefined reference to `led_classdev_unregister'
Add an explicit Kconfig dependency.
Fixes: 5ae20a8050 ("platform/x86: int3472/discrete: Create a LED class device for the privacy LED")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230208163658.2129009-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There is a spelling mistake in a dev_warn message, make it lower case
and fix the spelling.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20230207091443.143995-1-colin.i.king@gmail.com
Signed-off-by: Prashant Malani <pmalani@chromium.org>
[pmalani fixed up commit message based on tzungbi comment]
Since commit 52d2253469 ("HID: Make lowlevel driver structs const")
the lowlevel HID drivers are only exposed as const.
Take advantage of this to constify the underlying structure, too.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230130-hid-const-ll-driver-v1-7-3fc282b3b1d0@weissschuh.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add interface to get resources and platform data. This will avoid code
duplication. These interfaces includes:
- Get resource count
- Get resource at an index
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230202010738.2186174-7-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There is one Intel Out-of-Band (OOB) PCI device per CPU package. Since
TPMI feature is exposed via OOB PCI device, there will be multiple
TPMI device instances on a multi CPU package system.
There are several PM features, which needs to associate APIC based CPU
package ID information to a TPMI instance. For example if Intel Speed
Select feature requires control of a CPU package, it needs to identify
right TPMI device instance.
There is one special TPMI ID (ID = 0x81) in the PFS. The MMIO
region of this TPMI ID points to a mapping table:
- PCI Bus ID
- PCI Device ID
- APIC based Package ID
This mapping information can be used by any PM feature driver which
requires mapping from a CPU package to a TPMI device instance.
Unlike other TPMI features, device node is not created for this feature
ID (0x81). Instead store the mapping information as platform data, which
is part of the per PCI device TPMI instance (struct intel_tpmi_info).
Later the TPMI feature drivers can get the mapping information using an
interface "tpmi_get_platform_data()"
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230202010738.2186174-6-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The TPMI (Topology Aware Register and PM Capsule Interface) provides a
flexible, extendable and PCIe enumerable MMIO interface for PM features.
For example Intel RAPL (Running Average Power Limit) provides a MMIO
interface using TPMI. This has advantage over traditional MSR
(Model Specific Register) interface, where a thread needs to be scheduled
on the target CPU to read or write. Also the RAPL features vary between
CPU models, and hence lot of model specific code. Here TPMI provides an
architectural interface by providing hierarchical tables and fields,
which will not need any model specific implementation.
The TPMI interface uses a PCI VSEC structure to expose the location of
MMIO region.
This VSEC structure is present in the PCI configuration space of the
Intel Out-of-Band (OOB) device, which is handled by the Intel VSEC
driver. The Intel VSEC driver parses VSEC structures present in the PCI
configuration space of the given device and creates an auxiliary device
object for each of them. In particular, it creates an auxiliary device
object representing TPMI that can be bound by an auxiliary driver.
Introduce a TPMI driver that will bind to the TPMI auxiliary device
object created by the Intel VSEC driver.
The TPMI specification defines a PFS (PM Feature Structure) table.
This table is present in the TPMI MMIO region. The starting address
of PFS is derived from the tBIR (Bar Indicator Register) and "Address"
field from the VSEC header.
Each TPMI PM feature has one entry in the PFS with a unique TPMI
ID and its access details. The TPMI driver creates device nodes
for the supported PM features.
The names of the devices created by the TPMI driver start with the
"intel_vsec.tpmi-" prefix which is followed by a specific name of the
given PM feature (for example, "intel_vsec.tpmi-rapl.0").
The device nodes are create by using interface "intel_vsec_add_aux()"
provided by the Intel VSEC driver.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230202010738.2186174-5-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add fields to struct intel_vsec_device, so that core module (which
creates aux bus devices) can pass private data to the client drivers.
For example there is one vsec device instance per CPU package. On a
multi package system, this private data can be used to pass the package
ID. This package id can be used by client drivers to change power
settings for a specific CPU package by targeting MMIO space of the
correct PCI device.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230202010738.2186174-4-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Remove static for intel_vsec_add_aux() and export this interface so that
it can be used by other vsec related modules.
This driver creates aux devices by parsing PCI-VSEC, which allows
individual drivers to load on those devices. Those driver may further
create more devices on aux bus by parsing the PCI MMIO region.
For example, TPMI (Topology Aware Register and PM Capsule Interface)
creates device nodes for power management features by parsing MMIO region.
When TPMI driver creates devices, it can reuse existing function
intel_vsec_add_aux() to create aux devices with TPMI device as the parent.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230202010738.2186174-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add TPMI (Topology Aware Register and PM Capsule Interface) VSEC ID to
create an aux device. This will allow TPMI driver to enumerate on this
aux device.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230202010738.2186174-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
According to:
https://github.com/intel/ipu6-drivers/blob/master/patch/int3472-support-independent-clock-and-LED-gpios-5.17%2B.patch
Bits 31-24 of the _DSM pin entry integer value codes the active-value,
that is the actual physical signal (0 or 1) which needs to be output on
the pin to turn the sensor chip on (to make it active).
So if bits 31-24 are 0 for a reset pin, then the actual value of the reset
pin needs to be 0 to take the chip out of reset. IOW in this case the reset
signal is active-high rather then the default active-low.
And if bits 31-24 are 0 for a clk-en pin then the actual value of the clk
pin needs to be 0 to enable the clk. So in this case the clk-en signal
is active-low rather then the default active-high.
IOW if bits 31-24 are 0 for a pin, then the default polarity of the pin
is inverted.
Add a check for this and also propagate this new polarity to the clock
registration.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230127203729.10205-6-hdegoede@redhat.com
Move the requesting of the clk-enable GPIO to skl_int3472_register_clock()
(and move the gpiod_put to unregister).
This mirrors the GPIO handling in skl_int3472_register_regulator() and
allows removing skl_int3472_map_gpio_to_clk() from discrete.c.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230127203729.10205-5-hdegoede@redhat.com
On some systems, e.g. the Lenovo ThinkPad X1 Yoga gen 7 and the ThinkPad
X1 Nano gen 2 there is no clock-enable pin, triggering the:
"No clk GPIO. The privacy LED won't work" warning and causing the privacy
LED to not work.
Fix this by modeling the privacy LED as a LED class device rather then
integrating it with the registered clock.
Note this relies on media subsys changes to actually turn the LED on/off
when the sensor's v4l2_subdev's s_stream() operand gets called.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230127203729.10205-4-hdegoede@redhat.com
Add a helper function to map the type returned by the _DSM
method to a function name + the default polarity for that function.
And fold the INT3472_GPIO_TYPE_RESET and INT3472_GPIO_TYPE_POWERDOWN
cases into a single generic case.
This is a preparation patch for further GPIO mapping changes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230127203729.10205-3-hdegoede@redhat.com
Simplify code by using min_t helper macro for logical evaluation
and value assignment. Use the _t variant of min macro since the
variable types are not same.
This issue is identified by coccicheck using the minmax.cocci file.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Link: https://lore.kernel.org/r/Y9QupEMPFoZpWIiM@ubun2204.myguest.virtualbox.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Simplify code by using min_t helper macro for logical evaluation
and value assignment. Use the _t variant of min macro since the
variable types are not same.
This issue is identified by coccicheck using the minmax.cocci file.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/Y9P8debIztOZXazW@ubun2204.myguest.virtualbox.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Until now, the dell-wmi-ddv driver needs to be manually
patched and compiled to test compatibility with unknown
DDV WMI interface versions.
Add a module param to allow users to force loading even
when a unknown interface version was detected. Since this
might cause various unwanted side effects, the module param
is marked as unsafe.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230126194021.381092-5-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When the ACPI WMI interface returns a valid ACPI object
which has the wrong type, then ENOMSG instead of EIO
should be returned, since the WMI method was still
successfully evaluated.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230126194021.381092-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
