[ Upstream commit adbab347ec ]
Lan does not work on rgmii-id, most rk356x devices lan
is being switched to rgmii.
Signed-off-by: Furkan Kardame <f.kardame@manjaro.org>
Link: https://lore.kernel.org/r/20221010190142.18340-2-f.kardame@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c1ea6a5f4 ]
bigjoiner_pipes() doesn't consider that:
- RKL only has three pipes
- some pipes may be fused off
This means that intel_atomic_check_bigjoiner() won't reject
all configurations that would need a non-existent pipe.
Instead we just keep on rolling witout actually having
reserved the slave pipe we need.
It's possible that we don't outright explode anywhere due to
this since eg. for_each_intel_crtc_in_pipe_mask() will only
walk the crtcs we've registered even though the passed in
pipe_mask asks for more of them. But clearly the thing won't
do what is expected of it when the required pipes are not
present.
Fix the problem by consulting the device info pipe_mask already
in bigjoiner_pipes().
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118185201.10469-1-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
(cherry picked from commit f1c87a94a1)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21b85b0952 ]
This series addresses the issue first reported in [1], and fully described
in patch 2. Patches 1 and 2 address the user visible issue and are tagged
for stable backports.
While exploring solutions to this issue, related problems with mmu
notification calls were discovered. This is addressed in the patch
"hugetlb: remove duplicate mmu notifications:". Since there are no user
visible effects, this third is not tagged for stable backports.
Previous discussions suggested further cleanup by removing the
routine zap_page_range. This is possible because zap_page_range_single
is now exported, and all callers of zap_page_range pass ranges entirely
within a single vma. This work will be done in a later patch so as not
to distract from this bug fix.
[1] https://lore.kernel.org/lkml/CAO4mrfdLMXsao9RF4fUE8-Wfde8xmjsKrTNMNC9wjUb6JudD0g@mail.gmail.com/
This patch (of 2):
Expose the routine zap_page_range_single to zap a range within a single
vma. The madvise routine madvise_dontneed_single_vma can use this routine
as it explicitly operates on a single vma. Also, update the mmu
notification range in zap_page_range_single to take hugetlb pmd sharing
into account. This is required as MADV_DONTNEED supports hugetlb vmas.
Link: https://lkml.kernel.org/r/20221114235507.294320-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20221114235507.294320-2-mike.kravetz@oracle.com
Fixes: 90e7e7f5ef ("mm: enable MADV_DONTNEED for hugetlb mappings")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Wei Chen <harperchen1110@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bce9332220 upstream.
proc_skip_spaces() seems to think it is working on C strings, and ends
up being just a wrapper around skip_spaces() with a really odd calling
convention.
Instead of basing it on skip_spaces(), it should have looked more like
proc_skip_char(), which really is the exact same function (except it
skips a particular character, rather than whitespace). So use that as
inspiration, odd coding and all.
Now the calling convention actually makes sense and works for the
intended purpose.
Reported-and-tested-by: Kyle Zeng <zengyhkyle@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6cfaf34be upstream.
proc_get_long() is passed a size_t, but then assigns it to an 'int'
variable for the length. Let's not do that, even if our IO paths are
limited to MAX_RW_COUNT (exactly because of these kinds of type errors).
So do the proper test in the rigth type.
Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b52be557e2 upstream.
When __do_semtimedop() goes to sleep because it has to wait for a
semaphore value becoming zero or becoming bigger than some threshold, it
links the on-stack sem_queue to the sem_array, then goes to sleep
without holding a reference on the sem_array.
When __do_semtimedop() comes back out of sleep, one of two things must
happen:
a) We prove that the on-stack sem_queue has been disconnected from the
(possibly freed) sem_array, making it safe to return from the stack
frame that the sem_queue exists in.
b) We stabilize our reference to the sem_array, lock the sem_array, and
detach the sem_queue from the sem_array ourselves.
sem_array has RCU lifetime, so for case (b), the reference can be
stabilized inside an RCU read-side critical section by locklessly
checking whether the sem_queue is still connected to the sem_array.
However, the current code does the lockless check on sem_queue before
starting an RCU read-side critical section, so the result of the
lockless check immediately becomes useless.
Fix it by doing rcu_read_lock() before the lockless check. Now RCU
ensures that if we observe the object being on our queue, the object
can't be freed until rcu_read_unlock().
This bug is only hittable on kernel builds with full preemption support
(either CONFIG_PREEMPT or PREEMPT_DYNAMIC with preempt=full).
Fixes: 370b262c89 ("ipc/sem: avoid idr tree lookup for interrupted semop")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89d21e259a upstream.
test_bpf tail call tests end up as:
test_bpf: #0 Tail call leaf jited:1 85 PASS
test_bpf: #1 Tail call 2 jited:1 111 PASS
test_bpf: #2 Tail call 3 jited:1 145 PASS
test_bpf: #3 Tail call 4 jited:1 170 PASS
test_bpf: #4 Tail call load/store leaf jited:1 190 PASS
test_bpf: #5 Tail call load/store jited:1
BUG: Unable to handle kernel data access on write at 0xf1b4e000
Faulting instruction address: 0xbe86b710
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=4K MMU=Hash PowerMac
Modules linked in: test_bpf(+)
CPU: 0 PID: 97 Comm: insmod Not tainted 6.1.0-rc4+ #195
Hardware name: PowerMac3,1 750CL 0x87210 PowerMac
NIP: be86b710 LR: be857e88 CTR: be86b704
REGS: f1b4df20 TRAP: 0300 Not tainted (6.1.0-rc4+)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28008242 XER: 00000000
DAR: f1b4e000 DSISR: 42000000
GPR00: 00000001 f1b4dfe0 c11d2280 00000000 00000000 00000000 00000002 00000000
GPR08: f1b4e000 be86b704 f1b4e000 00000000 00000000 100d816a f2440000 fe73baa8
GPR16: f2458000 00000000 c1941ae4 f1fe2248 00000045 c0de0000 f2458030 00000000
GPR24: 000003e8 0000000f f2458000 f1b4dc90 3e584b46 00000000 f24466a0 c1941a00
NIP [be86b710] 0xbe86b710
LR [be857e88] __run_one+0xec/0x264 [test_bpf]
Call Trace:
[f1b4dfe0] [00000002] 0x2 (unreliable)
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
---[ end trace 0000000000000000 ]---
This is a tentative to write above the stack. The problem is encoutered
with tests added by commit 38608ee7b6 ("bpf, tests: Add load store
test case for tail call")
This happens because tail call is done to a BPF prog with a different
stack_depth. At the time being, the stack is kept as is when the caller
tail calls its callee. But at exit, the callee restores the stack based
on its own properties. Therefore here, at each run, r1 is erroneously
increased by 32 - 16 = 16 bytes.
This was done that way in order to pass the tail call count from caller
to callee through the stack. As powerpc32 doesn't have a red zone in
the stack, it was necessary the maintain the stack as is for the tail
call. But it was not anticipated that the BPF frame size could be
different.
Let's take a new approach. Use register r4 to carry the tail call count
during the tail call, and save it into the stack at function entry if
required. This means the input parameter must be in r3, which is more
correct as it is a 32 bits parameter, then tail call better match with
normal BPF function entry, the down side being that we move that input
parameter back and forth between r3 and r4. That can be optimised later.
Doing that also has the advantage of maximising the common parts between
tail calls and a normal function exit.
With the fix, tail call tests are now successfull:
test_bpf: #0 Tail call leaf jited:1 53 PASS
test_bpf: #1 Tail call 2 jited:1 115 PASS
test_bpf: #2 Tail call 3 jited:1 154 PASS
test_bpf: #3 Tail call 4 jited:1 165 PASS
test_bpf: #4 Tail call load/store leaf jited:1 101 PASS
test_bpf: #5 Tail call load/store jited:1 141 PASS
test_bpf: #6 Tail call error path, max count reached jited:1 994 PASS
test_bpf: #7 Tail call count preserved across function calls jited:1 140975 PASS
test_bpf: #8 Tail call error path, NULL target jited:1 110 PASS
test_bpf: #9 Tail call error path, index out of range jited:1 69 PASS
test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed]
Suggested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Fixes: 51c66ad849 ("powerpc/bpf: Implement extended BPF on PPC32")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/757acccb7fbfc78efa42dcf3c974b46678198905.1669278887.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23393c6461 upstream.
Currently tpm transactions are executed unconditionally in
tpm_pm_suspend() function, which may lead to races with other tpm
accessors in the system.
Specifically, the hw_random tpm driver makes use of tpm_get_random(),
and this function is called in a loop from a kthread, which means it's
not frozen alongside userspace, and so can race with the work done
during system suspend:
tpm tpm0: tpm_transmit: tpm_recv: error -52
tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics
CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
Call Trace:
tpm_tis_status.cold+0x19/0x20
tpm_transmit+0x13b/0x390
tpm_transmit_cmd+0x20/0x80
tpm1_pm_suspend+0xa6/0x110
tpm_pm_suspend+0x53/0x80
__pnp_bus_suspend+0x35/0xe0
__device_suspend+0x10f/0x350
Fix this by calling tpm_try_get_ops(), which itself is a wrapper around
tpm_chip_start(), but takes the appropriate mutex.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/all/c5ba47ef-393f-1fba-30bd-1230d1b4b592@suse.cz/
Cc: stable@vger.kernel.org
Fixes: e891db1a18 ("tpm: turn on TPM on suspend for TPM 1.x")
[Jason: reworked commit message, added metadata]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d9f15a9de4 ]
This reverts commit 232ccac1bd.
On the subject of suspend, the RISC-V SBI spec states:
This does not cover whether any given events actually reach the hart or
not, just what the hart will do if it receives an event. On PolarFire
SoC, and potentially other SiFive based implementations, events from the
RISC-V timer do reach a hart during suspend. This is not the case for the
implementation on the Allwinner D1 - there timer events are not received
during suspend.
To fix this, the CLOCK_EVT_FEAT_C3STOP (mis)feature was enabled for the
timer driver - but this has broken both RCU stall detection and timers
generally on PolarFire SoC and potentially other SiFive based
implementations.
If an AXI read to the PCIe controller on PolarFire SoC times out, the
system will stall, however, with CLOCK_EVT_FEAT_C3STOP active, the system
just locks up without RCU stalling:
io scheduler mq-deadline registered
io scheduler kyber registered
microchip-pcie 2000000000.pcie: host bridge /soc/pcie@2000000000 ranges:
microchip-pcie 2000000000.pcie: MEM 0x2008000000..0x2087ffffff -> 0x0008000000
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: axi read request error
microchip-pcie 2000000000.pcie: axi read timeout
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
Freeing initrd memory: 7332K
Similarly issues were reported with clock_nanosleep() - with a test app
that sleeps each cpu for 6, 5, 4, 3 ms respectively, HZ=250 & the blamed
commit in place, the sleep times are rounded up to the next jiffy:
== CPU: 1 == == CPU: 2 == == CPU: 3 == == CPU: 4 ==
Mean: 7.974992 Mean: 7.976534 Mean: 7.962591 Mean: 3.952179
Std Dev: 0.154374 Std Dev: 0.156082 Std Dev: 0.171018 Std Dev: 0.076193
Hi: 9.472000 Hi: 10.495000 Hi: 8.864000 Hi: 4.736000
Lo: 6.087000 Lo: 6.380000 Lo: 4.872000 Lo: 3.403000
Samples: 521 Samples: 521 Samples: 521 Samples: 521
Fortunately, the D1 has a second timer, which is "currently used in
preference to the RISC-V/SBI timer driver" so a revert here does not
hurt operation of D1 in its current form.
Ultimately, a DeviceTree property (or node) will be added to encode the
behaviour of the timers, but until then revert the addition of
CLOCK_EVT_FEAT_C3STOP.
Fixes: 232ccac1bd ("clocksource/drivers/riscv: Events are stopped during CPU suspend")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/linux-riscv/YzYTNQRxLr7Q9JR0@spud/
Link: https://github.com/riscv-non-isa/riscv-sbi-doc/issues/98/
Link: https://lore.kernel.org/linux-riscv/bf6d3b1f-f703-4a25-833e-972a44a04114@sholland.org/
Link: https://lore.kernel.org/r/20221122121620.3522431-1-conor.dooley@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48d4180939 ]
In a system with a single initiator node, and one or more memory-only
'target' nodes, the memory-only node(s) would fail to register their
initiator node correctly. i.e. in sysfs:
# ls /sys/devices/system/node/node0/access0/targets/
node0
Where as the correct behavior should be:
# ls /sys/devices/system/node/node0/access0/targets/
node0 node1
This happened because hmat_register_target_initiators() uses list_sort()
to sort the initiator list, but the sort comparision function
(initiator_cmp()) is overloaded to also set the node mask's bits.
In a system with a single initiator, the list is singular, and list_sort
elides the comparision helper call. Thus the node mask never gets set,
and the subsequent search for the best initiator comes up empty.
Add a new helper to consume the sorted initiator list, and generate the
nodemask, decoupling it from the overloaded initiator_cmp() comparision
callback. This prevents the singular list corner case naturally, and
makes the code easier to follow as well.
Cc: <stable@vger.kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Chris Piper <chris.d.piper@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20221116-acpi_hmat_fix-v2-2-3712569be691@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14f16d4756 ]
In hmat_register_target_initiators(), the variable 'best' gets
initialized in the outer per-locality-type for loop. The initialization
just before setting up 'Access 1' targets was unnecessary. Remove it.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20221116-acpi_hmat_fix-v2-1-3712569be691@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 48d4180939 ("ACPI: HMAT: Fix initiator registration for single-initiator systems")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d36678f790 ]
Recent changes to the DMA code has resulting in the IMX driver failing
I2C transfers when the buffer has been vmalloc. Only perform DMA
transfers if the message has the I2C_M_DMA_SAFE flag set, indicating
the client is providing a buffer which is DMA safe.
This is a minimal fix for stable. The I2C core provides helpers to
allocate a bounce buffer. For a fuller fix the master should make use
of these helpers.
Fixes: 4544b9f25e ("dma-mapping: Add vmap checks to dma_map_single()")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d8ccf4f11 ]
Fix to return a negative error code from the gi2c->err instead of
0.
Fixes: d8703554f4 ("i2c: qcom-geni: Add support for GPI DMA")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasoluitons.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 145900cf91 ]
A problem about i2c-npcm7xx create debugfs failed is triggered with the
following log given:
[ 173.827310] debugfs: Directory 'npcm_i2c' with parent '/' already present!
The reason is that npcm_i2c_init() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of npcm_i2c can never be created later.
npcm_i2c_init()
debugfs_create_dir() # create debugfs directory
platform_driver_register()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when platform_driver_register() returns error.
Fixes: 56a1485b10 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Tali Perry <tali.perry@nuvoton.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 79ece9b292 upstream.
A driver that supports I2C_DRV_ACPI_WAIVE_D0_PROBE is not expected to
power off a device that it has not powered on previously.
For devices operating in "full_power" mode, the first call to
`i2c_acpi_waive_d0_probe` will return 0, which means that the device
will be turned on with `dev_pm_domain_attach`.
If probe fails the second call to `i2c_acpi_waive_d0_probe` will
return 1, which means that the device will not be turned off.
This is, it will be left in a different power state. Lets fix it.
Reviewed-by: Hidenori Kobayashi <hidenorik@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: b18c1ad685 ("i2c: Allow an ACPI driver to manage the device's power state during probe")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 95bc35f9be ]
Commit da87878010 ("mm/damon/sysfs: support online inputs update") made
'damon_sysfs_set_schemes()' to be called for running DAMON context, which
could have schemes. In the case, DAMON sysfs interface is supposed to
update, remove, or add schemes to reflect the sysfs files. However, the
code is assuming the DAMON context wouldn't have schemes at all, and
therefore creates and adds new schemes. As a result, the code doesn't
work as intended for online schemes tuning and could have more than
expected memory footprint. The schemes are all in the DAMON context, so
it doesn't leak the memory, though.
Remove the wrong asssumption (the DAMON context wouldn't have schemes) in
'damon_sysfs_set_schemes()' to fix the bug.
Link: https://lkml.kernel.org/r/20221122194831.3472-1-sj@kernel.org
Fixes: da87878010 ("mm/damon/sysfs: support online inputs update")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5a79d7c0c ]
damon_new_scheme() has too many parameters, so introduce struct
damos_access_pattern to simplify it.
In additon, we can't use a bpf trace kprobe that has more than 5
parameters.
Link: https://lkml.kernel.org/r/20220908191443.129534-1-sj@kernel.org
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 95bc35f9be ("mm/damon/sysfs: fix wrong empty schemes assumption under online tuning in damon_sysfs_set_schemes()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5082d386e ]
When the kernel receives a route deletion request from user space it
tries to delete a route that matches the route attributes specified in
the request.
If only prefix information is specified in the request, the kernel
should delete the first matching FIB alias regardless of its associated
FIB info. However, an error is currently returned when the FIB info is
backed by a nexthop object:
# ip nexthop add id 1 via 192.0.2.2 dev dummy10
# ip route add 198.51.100.0/24 nhid 1
# ip route del 198.51.100.0/24
RTNETLINK answers: No such process
Fix by matching on such a FIB info when legacy nexthop attributes are
not specified in the request. An earlier check already covers the case
where a nexthop ID is specified in the request.
Add tests that cover these flows. Before the fix:
# ./fib_nexthops.sh -t ipv4_fcnal
...
TEST: Delete route when not specifying nexthop attributes [FAIL]
Tests passed: 11
Tests failed: 1
After the fix:
# ./fib_nexthops.sh -t ipv4_fcnal
...
TEST: Delete route when not specifying nexthop attributes [ OK ]
Tests passed: 12
Tests failed: 0
No regressions in other tests:
# ./fib_nexthops.sh
...
Tests passed: 228
Tests failed: 0
# ./fib_tests.sh
...
Tests passed: 186
Tests failed: 0
Cc: stable@vger.kernel.org
Reported-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Jonas Gorski <jonas.gorski@gmail.com>
Fixes: 493ced1ac4 ("ipv4: Allow routes to use nexthop objects")
Fixes: 6bf92d70e6 ("net: ipv4: fix route with nexthop object delete warning")
Fixes: 61b91eb33a ("ipv4: Handle attempt to delete multipath route when fib_info contains an nh reference")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20221124210932.2470010-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61b91eb33a ]
Gwangun Jung reported a slab-out-of-bounds access in fib_nh_match:
fib_nh_match+0xf98/0x1130 linux-6.0-rc7/net/ipv4/fib_semantics.c:961
fib_table_delete+0x5f3/0xa40 linux-6.0-rc7/net/ipv4/fib_trie.c:1753
inet_rtm_delroute+0x2b3/0x380 linux-6.0-rc7/net/ipv4/fib_frontend.c:874
Separate nexthop objects are mutually exclusive with the legacy
multipath spec. Fix fib_nh_match to return if the config for the
to be deleted route contains a multipath spec while the fib_info
is using a nexthop object.
Fixes: 493ced1ac4 ("ipv4: Allow routes to use nexthop objects")
Fixes: 6bf92d70e6 ("net: ipv4: fix route with nexthop object delete warning")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d5082d386e ("ipv4: Fix route deletion when nexthop info is not specified")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bedbbd782 ]
for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() for the error path to avoid reference count leak.
Fixes: 2e45528930 ("iommu/vt-d: Unify the way to process DMAR device scope array")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221121113649.190393-3-wangxiongfeng2@huawei.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afca9e19cc ]
for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() before 'return true' to avoid reference count leak.
Fixes: 89a6079df7 ("iommu/vt-d: Force IOMMU on for platform opt in hint")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221121113649.190393-2-wangxiongfeng2@huawei.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b17d19a531 ]
If a crash happens on cpu3 and all interrupts are binding on cpu0, the
bad irq routing will cause a crash kernel which can't receive any irq.
Because crash kernel won't clean up all harts' PLIC enable bits in
enable registers. This patch is similar to 9141a003a4 ("ARM: 7316/1:
kexec: EOI active and mask all interrupts in kexec crash path") and
78fd584cde ("arm64: kdump: implement machine_crash_shutdown()"), and
PowerPC also has the same mechanism.
Fixes: fba8a8674f ("RISC-V: Add kexec support")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Cc: Nick Kossifidis <mick@ics.forth.gr>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221020141603.2856206-2-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e1864332f ]
Currently, when detecting vmap stack overflow, riscv firstly switches
to the so called shadow stack, then use this shadow stack to call the
get_overflow_stack() to get the overflow stack. However, there's
a race here if two or more harts use the same shadow stack at the same
time.
To solve this race, we introduce spin_shadow_stack atomic var, which
will be swap between its own address and 0 in atomic way, when the
var is set, it means the shadow_stack is being used; when the var
is cleared, it means the shadow_stack isn't being used.
Fixes: 31da94c25a ("riscv: add VMAP_STACK overflow detection")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Suggested-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20221030124517.2370-1-jszhang@kernel.org
[Palmer: Add AQ to the swap, and also some comments.]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f105a7427 ]
The EFI page table is initially created as a copy of the kernel page table.
With VMAP_STACK enabled, kernel stacks are allocated in the vmalloc area:
if the stack is allocated in a new PGD (one that was not present at the
moment of the efi page table creation or not synced in a previous vmalloc
fault), the kernel will take a trap when switching to the efi page table
when the vmalloc kernel stack is accessed, resulting in a kernel panic.
Fix that by updating the efi kernel mappings before switching to the efi
page table.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: b91540d52a ("RISC-V: Add EFI runtime services")
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20221121133303.1782246-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64c150339e ]
There is a possibility of dividing by zero due to the pcs->bits_per_pin
if pcs->fmask() also has a value of zero and called fls
from asm-generic/bitops/builtin-fls.h or arch/x86/include/asm/bitops.h.
The function pcs_probe() has the branch that assigned to fmask 0 before
pcs_allocate_pin_table() was called
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4e7e8017a8 ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221117123034.27383-1-korotkov.maxim.s@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19c5bda74d ]
sound/soc/codecs/tlv320adc3xxx.c: In function ‘adc3xxx_i2c_probe’:
sound/soc/codecs/tlv320adc3xxx.c:1359:21: error: implicit declaration of function ‘devm_gpiod_get’; did you mean ‘devm_gpio_free’? [-Werror=implicit-function-declaration]
adc3xxx->rst_pin = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
^~~~~~~~~~~~~~
devm_gpio_free
CC [M] drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgt215.o
LD [M] sound/soc/codecs/snd-soc-ak4671.o
LD [M] sound/soc/codecs/snd-soc-arizona.o
LD [M] sound/soc/codecs/snd-soc-cros-ec-codec.o
LD [M] sound/soc/codecs/snd-soc-ak4641.o
LD [M] sound/soc/codecs/snd-soc-alc5632.o
sound/soc/codecs/tlv320adc3xxx.c:1359:50: error: ‘GPIOD_OUT_LOW’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_LOW’?
adc3xxx->rst_pin = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
^~~~~~~~~~~~~
GPIOF_INIT_LOW
sound/soc/codecs/tlv320adc3xxx.c:1359:50: note: each undeclared identifier is reported only once for each function it appears in
LD [M] sound/soc/codecs/snd-soc-cs35l32.o
sound/soc/codecs/tlv320adc3xxx.c:1408:2: error: implicit declaration of function ‘gpiod_set_value_cansleep’; did you mean ‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration]
gpiod_set_value_cansleep(adc3xxx->rst_pin, 1);
^~~~~~~~~~~~~~~~~~~~~~~~
gpio_set_value_cansleep
LD [M] sound/soc/codecs/snd-soc-cs35l41-lib.o
LD [M] sound/soc/codecs/snd-soc-cs35l36.o
LD [M] sound/soc/codecs/snd-soc-cs35l34.o
LD [M] sound/soc/codecs/snd-soc-cs35l41.o
CC [M] drivers/gpu/drm/nouveau/nvkm/engine/disp/sormcp89.o
cc1: all warnings being treated as errors
Fixes: e9a3b57efd ("ASoC: codec: tlv320adc3xxx: New codec driver")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Link: https://lore.kernel.org/r/20220512074640.75550-3-tanghui20@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 698813ba8c ]
For _sx controls the semantics of the max field is not the usual one, max
is the number of steps rather than the maximum value. This means that our
check in snd_soc_put_volsw_sx() needs to just check against the maximum
value.
Fixes: 4f1e50d6a9 ("ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220511134137.169575-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4313e5a613 upstream.
After 65536 dynamic events have been added and removed, the "type" field
of the event then uses the first type number that is available (not
currently used by other events). A type number is the identifier of the
binary blobs in the tracing ring buffer (known as events) to map them to
logic that can parse the binary blob.
The issue is that if a dynamic event (like a kprobe event) is traced and
is in the ring buffer, and then that event is removed (because it is
dynamic, which means it can be created and destroyed), if another dynamic
event is created that has the same number that new event's logic on
parsing the binary blob will be used.
To show how this can be an issue, the following can crash the kernel:
# cd /sys/kernel/tracing
# for i in `seq 65536`; do
echo 'p:kprobes/foo do_sys_openat2 $arg1:u32' > kprobe_events
# done
For every iteration of the above, the writing to the kprobe_events will
remove the old event and create a new one (with the same format) and
increase the type number to the next available on until the type number
reaches over 65535 which is the max number for the 16 bit type. After it
reaches that number, the logic to allocate a new number simply looks for
the next available number. When an dynamic event is removed, that number
is then available to be reused by the next dynamic event created. That is,
once the above reaches the max number, the number assigned to the event in
that loop will remain the same.
Now that means deleting one dynamic event and created another will reuse
the previous events type number. This is where bad things can happen.
After the above loop finishes, the kprobes/foo event which reads the
do_sys_openat2 function call's first parameter as an integer.
# echo 1 > kprobes/foo/enable
# cat /etc/passwd > /dev/null
# cat trace
cat-2211 [005] .... 2007.849603: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196
cat-2211 [005] .... 2007.849620: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196
cat-2211 [005] .... 2007.849838: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196
cat-2211 [005] .... 2007.849880: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196
# echo 0 > kprobes/foo/enable
Now if we delete the kprobe and create a new one that reads a string:
# echo 'p:kprobes/foo do_sys_openat2 +0($arg2):string' > kprobe_events
And now we can the trace:
# cat trace
sendmail-1942 [002] ..... 530.136320: foo: (do_sys_openat2+0x0/0x240) arg1= cat-2046 [004] ..... 530.930817: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������"
cat-2046 [004] ..... 530.930961: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������"
cat-2046 [004] ..... 530.934278: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������"
cat-2046 [004] ..... 530.934563: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������"
bash-1515 [007] ..... 534.299093: foo: (do_sys_openat2+0x0/0x240) arg1="kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk���������@��4Z����;Y�����U
And dmesg has:
==================================================================
BUG: KASAN: use-after-free in string+0xd4/0x1c0
Read of size 1 at addr ffff88805fdbbfa0 by task cat/2049
CPU: 0 PID: 2049 Comm: cat Not tainted 6.1.0-rc6-test+ #641
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x77
print_report+0x17f/0x47b
kasan_report+0xad/0x130
string+0xd4/0x1c0
vsnprintf+0x500/0x840
seq_buf_vprintf+0x62/0xc0
trace_seq_printf+0x10e/0x1e0
print_type_string+0x90/0xa0
print_kprobe_event+0x16b/0x290
print_trace_line+0x451/0x8e0
s_show+0x72/0x1f0
seq_read_iter+0x58e/0x750
seq_read+0x115/0x160
vfs_read+0x11d/0x460
ksys_read+0xa9/0x130
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fc2e972ade2
Code: c0 e9 b2 fe ff ff 50 48 8d 3d b2 3f 0a 00 e8 05 f0 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
RSP: 002b:00007ffc64e687c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fc2e972ade2
RDX: 0000000000020000 RSI: 00007fc2e980d000 RDI: 0000000000000003
RBP: 00007fc2e980d000 R08: 00007fc2e980c010 R09: 0000000000000000
R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000020f00
R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
</TASK>
The buggy address belongs to the physical page:
page:ffffea00017f6ec0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5fdbb
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffea00017f6ec8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88805fdbbe80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88805fdbbf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff88805fdbbf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff88805fdbc000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88805fdbc080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
This was found when Zheng Yejian sent a patch to convert the event type
number assignment to use IDA, which gives the next available number, and
this bug showed up in the fuzz testing by Yujie Liu and the kernel test
robot. But after further analysis, I found that this behavior is the same
as when the event type numbers go past the 16bit max (and the above shows
that).
As modules have a similar issue, but is dealt with by setting a
"WAS_ENABLED" flag when a module event is enabled, and when the module is
freed, if any of its events were enabled, the ring buffer that holds that
event is also cleared, to prevent reading stale events. The same can be
done for dynamic events.
If any dynamic event that is being removed was enabled, then make sure the
buffers they were enabled in are now cleared.
Link: https://lkml.kernel.org/r/20221123171434.545706e3@gandalf.local.home
Link: https://lore.kernel.org/all/20221110020319.1259291-1-zhengyejian1@huawei.com/
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Depends-on: e18eb8783e ("tracing: Add tracing_reset_all_online_cpus_unlocked() function")
Depends-on: 5448d44c38 ("tracing: Add unified dynamic event framework")
Depends-on: 6212dd2968 ("tracing/kprobes: Use dyn_event framework for kprobe events")
Depends-on: 065e63f951 ("tracing: Only have rmmod clear buffers that its events were active in")
Depends-on: 575380da8b ("tracing: Only clear trace buffer on module unload if event was traced")
Fixes: 77b44d1b7c ("tracing/kprobes: Rename Kprobe-tracer to kprobe-event")
Reported-by: Zheng Yejian <zhengyejian1@huawei.com>
Reported-by: Yujie Liu <yujie.liu@intel.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef38c79a52 upstream.
commit 94eedf3dde ("tracing: Fix race where eprobes can be called before
the event") fixed an issue where if an event is soft disabled, and the
trigger is being added, there's a small window where the event sees that
there's a trigger but does not see that it requires reading the event yet,
and then calls the trigger with the record == NULL.
This could be solved with adding memory barriers in the hot path, or to
make sure that all the triggers requiring a record check for NULL. The
latter was chosen.
Commit 94eedf3dde set the eprobe trigger handle to check for NULL, but
the same needs to be done with histograms.
Link: https://lore.kernel.org/linux-trace-kernel/20221118211809.701d40c0f8a757b0df3c025a@kernel.org/
Link: https://lore.kernel.org/linux-trace-kernel/20221123164323.03450c3a@gandalf.local.home
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Reported-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 022632f6c4 upstream.
The duration type is a 64 long value, not an int. This was
causing some long noise to report wrong values.
Change the duration to a 64 bits value.
Link: https://lkml.kernel.org/r/a93d8a8378c7973e9c609de05826533c9e977939.1668692096.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Fixes: bce29ac9ce ("trace: Add osnoise tracer")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12b8b046e4 upstream.
Users of intel_gt_retire_requests_timeout() expect 0 return value on
success. However, we have no protection from passing back 0 potentially
returned by a call to dma_fence_wait_timeout() when it succedes right
after its timeout has expired.
Replace 0 with -ETIME before potentially using the timeout value as return
code, so -ETIME is returned if there are still some requests not retired
after timeout, 0 otherwise.
v3: Use conditional expression, more compact but also better reflecting
intention standing behind the change.
v2: Move the added lines down so flush_submission() is not affected.
Fixes: f33a8a5160 ("drm/i915: Merge wait_for_timelines with retire_request")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221121145655.75141-3-janusz.krzysztofik@linux.intel.com
(cherry picked from commit f301a29f14)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8899b8728 upstream.
Commit b97060a99b ("drm/i915/guc: Update intel_gt_wait_for_idle to work
with GuC") extended the API of intel_gt_retire_requests_timeout() with an
extra argument 'remaining_timeout', intended for passing back unconsumed
portion of requested timeout when 0 (success) is returned. However, when
request retirement happens to succeed despite an error returned by a call
to dma_fence_wait_timeout(), that error code (a negative value) is passed
back instead of remaining time. If we then pass that negative value
forward as requested timeout to intel_uc_wait_for_idle(), an explicit BUG
will be triggered.
If request retirement succeeds but an error code is passed back via
remaininig_timeout, we may have no clue on how much of the initial timeout
might have been left for spending it on waiting for GuC to become idle.
OTOH, since all pending requests have been successfully retired, that
error code has been already ignored by intel_gt_retire_requests_timeout(),
then we shouldn't fail.
Assume no more time has been left on error and pass 0 timeout value to
intel_uc_wait_for_idle() to give it a chance to return success if GuC is
already idle.
v3: Don't fail on any error passed back via remaining_timeout.
v2: Fix the issue on the caller side, not the provider.
Fixes: b97060a99b ("drm/i915/guc: Update intel_gt_wait_for_idle to work with GuC")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: stable@vger.kernel.org # v5.15+
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221121145655.75141-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit f235dbd5b7)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a8cc8cabc upstream.
So that uses PSP to initialize HW.
Fixes: 0c2c02b66c ("drm/amdgpu/vcn: add firmware support for dimgrey_cavefish")
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f6cb17143 upstream.
Patch series "Fix a bunch of allmodconfig errors", v2.
Since b339ec9c22 ("kbuild: Only default to -Werror if COMPILE_TEST")
WERROR now defaults to COMPILE_TEST meaning that it's enabled for
allmodconfig builds. This leads to some interesting build failures when
using Clang, each resolved in this set.
With this set applied, I am able to obtain a successful allmodconfig Arm
build.
This patch (of 2):
calculate_bandwidth() is presently broken on all !(X86_64 || SPARC64 ||
ARM64) architectures built with Clang (all released versions), whereby the
stack frame gets blown up to well over 5k. This would cause an immediate
kernel panic on most architectures. We'll revert this when the following
bug report has been resolved:
https://github.com/llvm/llvm-project/issues/41896.
Link: https://lkml.kernel.org/r/20221125120750.3537134-1-lee@kernel.org
Link: https://lkml.kernel.org/r/20221125120750.3537134-2-lee@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 152fe65f30 upstream.
When enabled, KASAN enlarges function's stack-frames. Pushing quite a few
over the current threshold. This can mainly be seen on 32-bit
architectures where the present limit (when !GCC) is a lowly 1024-Bytes.
Link: https://lkml.kernel.org/r/20221125120750.3537134-3-lee@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c981cdfb99 upstream.
Commit 20b92a30b5 ("mmc: sdhci: update signal voltage switch code")
removed voltage switch delays from sdhci because mmc core had been
enhanced to support them. However that assumed that sdhci_set_ios()
did a single clock change, which it did not, and so the delays in mmc
core, which should have come after the first clock change, were not
effective.
Fix by avoiding re-configuring UHS and preset settings when the clock
is turning on and the settings have not changed. That then also avoids
the associated clock changes, so that then sdhci_set_ios() does a single
clock change when voltage switching, and the mmc core delays become
effective.
To do that has meant keeping track of driver strength (host->drv_type),
and cases of reinitialization (host->reinit_uhs).
Note also, the 'turning_on_clk' restriction should not be necessary
but is done to minimize the impact of the change on stable kernels.
Fixes: 20b92a30b5 ("mmc: sdhci: update signal voltage switch code")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221128133259.38305-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd30dcfa7a upstream.
After switching the voltage, no reset data and command will cause
CMD2 timeout.
Fixes: 29ca763fc2 ("mmc: sdhci-sprd: Add pin control support for voltage switch")
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221130121328.25553-1-wenchao.chen@unisoc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3cab1d213 upstream.
With the current logic the "failed to exit halt state" error would be
shown even if any other bit than CQHCI_HALT was set in the CQHCI_CTL
register, since the right hand side is always true. Fix this by using
the correct operator (bit-wise instead of logical AND) to only check for
the halt bit flag, which was obviously intended here.
Fixes: 85236d2be8 ("mmc: sdhci-esdhc-imx: clear the HALT bit when enable CQE")
Signed-off-by: Sebastian Falbesoner <sebastian.falbesoner@gmail.com>
Acked-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221121105721.1903878-1-sebastian.falbesoner@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 489d144563 upstream.
Clean up the MMC_TRIM_ARGS define that became ambiguous with DISCARD
introduction. While at it, let's fix one usage where MMC_TRIM_ARGS falsely
included DISCARD too.
Fixes: b3bf915308 ("mmc: core: new discard feature support at eMMC v4.5")
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/11376b5714964345908f3990f17e0701@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c61bfb1cb6 upstream.
The clk_disable_unprepare() should be called in the error handling
of devm_clk_bulk_get_optional, fix it by replacing devm_clk_get_optional
and clk_prepare_enable by devm_clk_get_optional_enabled.
Fixes: f5eccd94b6 ("mmc: mediatek: Add subsys clock control for MT8192 msdc")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221125090141.3626747-1-cuigaosheng1@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4307b4df1 upstream.
In __mmc_test_register_dbgfs_file(), we need to assign 'file', as it's
being used when removing the debugfs files when the mmc_test module is
removed.
Fixes: a04c50aaa9 ("mmc: core: no need to check return value of debugfs_create functions")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
[Ulf: Re-wrote the commit msg]
Link: https://lore.kernel.org/r/20221123095506.1965691-1-yebin@huaweicloud.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc3d2b5fc0 upstream.
Currently, pause frame register GMAC_RX_FLOW_CTRL_RFE is not updated
correctly when 'ethtool -A <IFACE> autoneg off rx off tx off' command
is issued. This fix ensures the flow control change is reflected directly
in the GMAC_RX_FLOW_CTRL_RFE register.
Fixes: 46f69ded98 ("net: stmmac: Use resolved link config in mac_link_up()")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Goh, Wei Sheng <wei.sheng.goh@intel.com>
Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 829ae0f81c upstream.
The issue is reported when removing memory through virtio_mem device. The
transparent huge page, experienced copy-on-write fault, is wrongly
regarded as pinned. The transparent huge page is escaped from being
isolated in isolate_migratepages_block(). The transparent huge page can't
be migrated and the corresponding memory block can't be put into offline
state.
Fix it by replacing page_mapcount() with total_mapcount(). With this, the
transparent huge page can be isolated and migrated, and the memory block
can be put into offline state. Besides, The page's refcount is increased
a bit earlier to avoid the page is released when the check is executed.
Link: https://lkml.kernel.org/r/20221124095523.31061-1-gshan@redhat.com
Fixes: 1da2f328fa ("mm,thp,compaction,cma: allow THP migration for CMA allocations")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reported-by: Zhenyu Zhang <zhenyzha@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org> [5.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6647e76ab6 upstream.
The V4L2_MEMORY_USERPTR interface is long deprecated and shouldn't be
used (and is discouraged for any modern v4l drivers). And Seth Jenkins
points out that the fallback to VM_PFNMAP/VM_IO is fundamentally racy
and dangerous.
Note that it's not even a case that should trigger, since any normal
user pointer logic ends up just using the pin_user_pages_fast() call
that does the proper page reference counting. That's not the problem
case, only if you try to use special device mappings do you have any
issues.
Normally I'd just remove this during the merge window, but since Seth
pointed out the problem cases, we really want to know as soon as
possible if there are actually any users of this odd special case of a
legacy interface. Neither Hans nor Mauro seem to think that such
mis-uses of the old legacy interface should exist. As Mauro says:
"See, V4L2 has actually 4 streaming APIs:
- Kernel-allocated mmap (usually referred simply as just mmap);
- USERPTR mmap;
- read();
- dmabuf;
The USERPTR is one of the oldest way to use it, coming from V4L
version 1 times, and by far the least used one"
And Hans chimed in on the USERPTR interface:
"To be honest, I wouldn't mind if it goes away completely, but that's a
bit of a pipe dream right now"
but while removing this legacy interface entirely may be a pipe dream we
can at least try to remove the unlikely (and actively broken) case of
using special device mappings for USERPTR accesses.
This replaces it with a WARN_ONCE() that we can remove once we've
hopefully confirmed that no actual users exist.
NOTE! Longer term, this means that a 'struct frame_vector' only ever
contains proper page pointers, and all the games we have with converting
them to pages can go away (grep for 'frame_vector_to_pages()' and the
uses of 'vec->is_pfns'). But this is just the first step, to verify
that this code really is all dead, and do so as quickly as possible.
Reported-by: Seth Jenkins <sethjenkins@google.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6989ea4881 upstream.
The firmware on some systems may configure GPIO pins to be
an interrupt source in so called "direct IRQ" mode. In such
cases the GPIO controller driver has no idea if those pins
are being used or not. At the same time, there is a known bug
in the firmwares that don't restore the pin settings correctly
after suspend, i.e. by an unknown reason the Rx value becomes
inverted.
Hence, let's save and restore the pins that are configured
as GPIOs in the input mode with GPIROUTIOXAPIC bit set.
Cc: stable@vger.kernel.org
Reported-and-tested-by: Dale Smith <dalepsmith@gmail.com>
Reported-and-tested-by: John Harris <jmharris@gmail.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214749
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20221124222926.72326-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6606515742 upstream.
The "force" argument to write_spec_ctrl_current() is currently ambiguous
as it does not guarantee the MSR write. This is due to the optimization
that writes to the MSR happen only when the new value differs from the
cached value.
This is fine in most cases, but breaks for S3 resume when the cached MSR
value gets out of sync with the hardware MSR value due to S3 resetting
it.
When x86_spec_ctrl_current is same as x86_spec_ctrl_base, the MSR write
is skipped. Which results in SPEC_CTRL mitigations not getting restored.
Move the MSR write from write_spec_ctrl_current() to a new function that
unconditionally writes to the MSR. Update the callers accordingly and
rename functions.
[ bp: Rework a bit. ]
Fixes: caa0ff24d5 ("x86/bugs: Keep a per-CPU IA32_SPEC_CTRL value")
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/806d39b0bfec2fe8f50dc5446dff20f5bb24a959.1669821572.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0a0ccda18 upstream.
Syzbot reported a null-ptr-deref bug:
NILFS (loop0): segctord starting. Construction interval = 5 seconds, CP
frequency < 30 seconds
general protection fault, probably for non-canonical address
0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 PID: 3603 Comm: segctord Not tainted
6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google
10/11/2022
RIP: 0010:nilfs_palloc_commit_free_entry+0xe5/0x6b0
fs/nilfs2/alloc.c:608
Code: 00 00 00 00 fc ff df 80 3c 02 00 0f 85 cd 05 00 00 48 b8 00 00 00
00 00 fc ff df 4c 8b 73 08 49 8d 7e 10 48 89 fa 48 c1 ea 03 <80> 3c 02
00 0f 85 26 05 00 00 49 8b 46 10 be a6 00 00 00 48 c7 c7
RSP: 0018:ffffc90003dff830 EFLAGS: 00010212
RAX: dffffc0000000000 RBX: ffff88802594e218 RCX: 000000000000000d
RDX: 0000000000000002 RSI: 0000000000002000 RDI: 0000000000000010
RBP: ffff888071880222 R08: 0000000000000005 R09: 000000000000003f
R10: 000000000000000d R11: 0000000000000000 R12: ffff888071880158
R13: ffff88802594e220 R14: 0000000000000000 R15: 0000000000000004
FS: 0000000000000000(0000) GS:ffff8880b9b00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb1c08316a8 CR3: 0000000018560000 CR4: 0000000000350ee0
Call Trace:
<TASK>
nilfs_dat_commit_free fs/nilfs2/dat.c:114 [inline]
nilfs_dat_commit_end+0x464/0x5f0 fs/nilfs2/dat.c:193
nilfs_dat_commit_update+0x26/0x40 fs/nilfs2/dat.c:236
nilfs_btree_commit_update_v+0x87/0x4a0 fs/nilfs2/btree.c:1940
nilfs_btree_commit_propagate_v fs/nilfs2/btree.c:2016 [inline]
nilfs_btree_propagate_v fs/nilfs2/btree.c:2046 [inline]
nilfs_btree_propagate+0xa00/0xd60 fs/nilfs2/btree.c:2088
nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337
nilfs_collect_file_data+0x45/0xd0 fs/nilfs2/segment.c:568
nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1018
nilfs_segctor_scan_file+0x3f4/0x6f0 fs/nilfs2/segment.c:1067
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1197 [inline]
nilfs_segctor_collect fs/nilfs2/segment.c:1503 [inline]
nilfs_segctor_do_construct+0x12fc/0x6af0 fs/nilfs2/segment.c:2045
nilfs_segctor_construct+0x8e3/0xb30 fs/nilfs2/segment.c:2379
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2487 [inline]
nilfs_segctor_thread+0x3c3/0xf30 fs/nilfs2/segment.c:2570
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
...
If DAT metadata file is corrupted on disk, there is a case where
req->pr_desc_bh is NULL and blocknr is 0 at nilfs_dat_commit_end() during
a b-tree operation that cascadingly updates ancestor nodes of the b-tree,
because nilfs_dat_commit_alloc() for a lower level block can initialize
the blocknr on the same DAT entry between nilfs_dat_prepare_end() and
nilfs_dat_commit_end().
If this happens, nilfs_dat_commit_end() calls nilfs_dat_commit_free()
without valid buffer heads in req->pr_desc_bh and req->pr_bitmap_bh, and
causes the NULL pointer dereference above in
nilfs_palloc_commit_free_entry() function, which leads to a crash.
Fix this by adding a NULL check on req->pr_desc_bh and req->pr_bitmap_bh
before nilfs_palloc_commit_free_entry() in nilfs_dat_commit_free().
This also calls nilfs_error() in that case to notify that there is a fatal
flaw in the filesystem metadata and prevent further operations.
Link: https://lkml.kernel.org/r/00000000000097c20205ebaea3d6@google.com
Link: https://lkml.kernel.org/r/20221114040441.1649940-1-zhangpeng362@huawei.com
Link: https://lkml.kernel.org/r/20221119120542.17204-1-konishi.ryusuke@gmail.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+ebe05ee8e98f755f61d0@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Furkan Kardame