-----BEGIN PGP SIGNATURE-----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=S4KK
-----END PGP SIGNATURE-----
Merge tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Regression fixes in zone activation:
- move a loop invariant out of the loop to avoid checking space
status
- properly handle unlimited activation
Other fixes:
- for subpage, force the free space v2 mount to avoid a warning and
make it easy to switch a filesystem on different page size systems
- export sysfs status of exclusive operation 'balance paused', so the
user space tools can recognize it and allow adding a device with
paused balance
- fix assertion failure when logging directory key range item"
* tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: sysfs: export the balance paused state of exclusive operation
btrfs: fix assertion failure when logging directory key range item
btrfs: zoned: activate block group properly on unlimited active zone device
btrfs: zoned: move non-changing condition check out of the loop
btrfs: force v2 space cache usage for subpage mount
The new state allowing device addition with paused balance is not
exported to user space so it can't recognize it and actually start the
operation.
Fixes: efc0e69c2f ("btrfs: introduce exclusive operation BALANCE_PAUSED state")
CC: stable@vger.kernel.org # 5.17
Signed-off-by: David Sterba <dsterba@suse.com>
When inserting a key range item (BTRFS_DIR_LOG_INDEX_KEY) while logging
a directory, we don't expect the insertion to fail with -EEXIST, because
we are holding the directory's log_mutex and we have dropped all existing
BTRFS_DIR_LOG_INDEX_KEY keys from the log tree before we started to log
the directory. However it's possible that during the logging we attempt
to insert the same BTRFS_DIR_LOG_INDEX_KEY key twice, but for this to
happen we need to race with insertions of items from other inodes in the
subvolume's tree while we are logging a directory. Here's how this can
happen:
1) We are logging a directory with inode number 1000 that has its items
spread across 3 leaves in the subvolume's tree:
leaf A - has index keys from the range 2 to 20 for example. The last
item in the leaf corresponds to a dir item for index number 20. All
these dir items were created in a past transaction.
leaf B - has index keys from the range 22 to 100 for example. It has
no keys from other inodes, all its keys are dir index keys for our
directory inode number 1000. Its first key is for the dir item with
a sequence number of 22. All these dir items were also created in a
past transaction.
leaf C - has index keys for our directory for the range 101 to 120 for
example. This leaf also has items from other inodes, and its first
item corresponds to the dir item for index number 101 for our directory
with inode number 1000;
2) When we finish processing the items from leaf A at log_dir_items(),
we log a BTRFS_DIR_LOG_INDEX_KEY key with an offset of 21 and a last
offset of 21, meaning the log is authoritative for the index range
from 21 to 21 (a single sequence number). At this point leaf B was
not yet modified in the current transaction;
3) When we return from log_dir_items() we have released our read lock on
leaf B, and have set *last_offset_ret to 21 (index number of the first
item on leaf B minus 1);
4) Some other task inserts an item for other inode (inode number 1001 for
example) into leaf C. That resulted in pushing some items from leaf C
into leaf B, in order to make room for the new item, so now leaf B
has dir index keys for the sequence number range from 22 to 102 and
leaf C has the dir items for the sequence number range 103 to 120;
5) At log_directory_changes() we call log_dir_items() again, passing it
a 'min_offset' / 'min_key' value of 22 (*last_offset_ret from step 3
plus 1, so 21 + 1). Then btrfs_search_forward() leaves us at slot 0
of leaf B, since leaf B was modified in the current transaction.
We have also initialized 'last_old_dentry_offset' to 20 after calling
btrfs_previous_item() at log_dir_items(), as it left us at the last
item of leaf A, which refers to the dir item with sequence number 20;
6) We then call process_dir_items_leaf() to process the dir items of
leaf B, and when we process the first item, corresponding to slot 0,
sequence number 22, we notice the dir item was created in a past
transaction and its sequence number is greater than the value of
*last_old_dentry_offset + 1 (20 + 1), so we decide to log again a
BTRFS_DIR_LOG_INDEX_KEY key with an offset of 21 and an end range
of 21 (key.offset - 1 == 22 - 1 == 21), which results in an -EEXIST
error from insert_dir_log_key(), as we have already inserted that
key at step 2, triggering the assertion at process_dir_items_leaf().
The trace produced in dmesg is like the following:
assertion failed: ret != -EEXIST, in fs/btrfs/tree-log.c:3857
[198255.980839][ T7460] ------------[ cut here ]------------
[198255.981666][ T7460] kernel BUG at fs/btrfs/ctree.h:3617!
[198255.983141][ T7460] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[198255.984080][ T7460] CPU: 0 PID: 7460 Comm: repro-ghost-dir Not tainted 5.18.0-5314c78ac373-misc-next+
[198255.986027][ T7460] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
[198255.988600][ T7460] RIP: 0010:assertfail.constprop.0+0x1c/0x1e
[198255.989465][ T7460] Code: 8b 4c 89 (...)
[198255.992599][ T7460] RSP: 0018:ffffc90007387188 EFLAGS: 00010282
[198255.993414][ T7460] RAX: 000000000000003d RBX: 0000000000000065 RCX: 0000000000000000
[198255.996056][ T7460] RDX: 0000000000000001 RSI: ffffffff8b62b180 RDI: fffff52000e70e24
[198255.997668][ T7460] RBP: ffffc90007387188 R08: 000000000000003d R09: ffff8881f0e16507
[198255.999199][ T7460] R10: ffffed103e1c2ca0 R11: 0000000000000001 R12: 00000000ffffffef
[198256.000683][ T7460] R13: ffff88813befc630 R14: ffff888116c16e70 R15: ffffc90007387358
[198256.007082][ T7460] FS: 00007fc7f7c24640(0000) GS:ffff8881f0c00000(0000) knlGS:0000000000000000
[198256.009939][ T7460] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[198256.014133][ T7460] CR2: 0000560bb16d0b78 CR3: 0000000140b34005 CR4: 0000000000170ef0
[198256.015239][ T7460] Call Trace:
[198256.015674][ T7460] <TASK>
[198256.016313][ T7460] log_dir_items.cold+0x16/0x2c
[198256.018858][ T7460] ? replay_one_extent+0xbf0/0xbf0
[198256.025932][ T7460] ? release_extent_buffer+0x1d2/0x270
[198256.029658][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.031114][ T7460] ? lock_acquired+0xbe/0x660
[198256.032633][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.034386][ T7460] ? lock_release+0xcf/0x8a0
[198256.036152][ T7460] log_directory_changes+0xf9/0x170
[198256.036993][ T7460] ? log_dir_items+0xba0/0xba0
[198256.037661][ T7460] ? do_raw_write_unlock+0x7d/0xe0
[198256.038680][ T7460] btrfs_log_inode+0x233b/0x26d0
[198256.041294][ T7460] ? log_directory_changes+0x170/0x170
[198256.042864][ T7460] ? btrfs_attach_transaction_barrier+0x60/0x60
[198256.045130][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.046568][ T7460] ? lock_release+0xcf/0x8a0
[198256.047504][ T7460] ? lock_downgrade+0x420/0x420
[198256.048712][ T7460] ? ilookup5_nowait+0x81/0xa0
[198256.049747][ T7460] ? lock_downgrade+0x420/0x420
[198256.050652][ T7460] ? do_raw_spin_unlock+0xa9/0x100
[198256.051618][ T7460] ? __might_resched+0x128/0x1c0
[198256.052511][ T7460] ? __might_sleep+0x66/0xc0
[198256.053442][ T7460] ? __kasan_check_read+0x11/0x20
[198256.054251][ T7460] ? iget5_locked+0xbd/0x150
[198256.054986][ T7460] ? run_delayed_iput_locked+0x110/0x110
[198256.055929][ T7460] ? btrfs_iget+0xc7/0x150
[198256.056630][ T7460] ? btrfs_orphan_cleanup+0x4a0/0x4a0
[198256.057502][ T7460] ? free_extent_buffer+0x13/0x20
[198256.058322][ T7460] btrfs_log_inode+0x2654/0x26d0
[198256.059137][ T7460] ? log_directory_changes+0x170/0x170
[198256.060020][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.060930][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.061905][ T7460] ? lock_contended+0x770/0x770
[198256.062682][ T7460] ? btrfs_log_inode_parent+0xd04/0x1750
[198256.063582][ T7460] ? lock_downgrade+0x420/0x420
[198256.064432][ T7460] ? preempt_count_sub+0x18/0xc0
[198256.065550][ T7460] ? __mutex_lock+0x580/0xdc0
[198256.066654][ T7460] ? stack_trace_save+0x94/0xc0
[198256.068008][ T7460] ? __kasan_check_write+0x14/0x20
[198256.072149][ T7460] ? __mutex_unlock_slowpath+0x12a/0x430
[198256.073145][ T7460] ? mutex_lock_io_nested+0xcd0/0xcd0
[198256.074341][ T7460] ? wait_for_completion_io_timeout+0x20/0x20
[198256.075345][ T7460] ? lock_downgrade+0x420/0x420
[198256.076142][ T7460] ? lock_contended+0x770/0x770
[198256.076939][ T7460] ? do_raw_spin_lock+0x1c0/0x1c0
[198256.078401][ T7460] ? btrfs_sync_file+0x5e6/0xa40
[198256.080598][ T7460] btrfs_log_inode_parent+0x523/0x1750
[198256.081991][ T7460] ? wait_current_trans+0xc8/0x240
[198256.083320][ T7460] ? lock_downgrade+0x420/0x420
[198256.085450][ T7460] ? btrfs_end_log_trans+0x70/0x70
[198256.086362][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.087544][ T7460] ? lock_release+0xcf/0x8a0
[198256.088305][ T7460] ? lock_downgrade+0x420/0x420
[198256.090375][ T7460] ? dget_parent+0x8e/0x300
[198256.093538][ T7460] ? do_raw_spin_lock+0x1c0/0x1c0
[198256.094918][ T7460] ? lock_downgrade+0x420/0x420
[198256.097815][ T7460] ? do_raw_spin_unlock+0xa9/0x100
[198256.101822][ T7460] ? dget_parent+0xb7/0x300
[198256.103345][ T7460] btrfs_log_dentry_safe+0x48/0x60
[198256.105052][ T7460] btrfs_sync_file+0x629/0xa40
[198256.106829][ T7460] ? start_ordered_ops.constprop.0+0x120/0x120
[198256.109655][ T7460] ? __fget_files+0x161/0x230
[198256.110760][ T7460] vfs_fsync_range+0x6d/0x110
[198256.111923][ T7460] ? start_ordered_ops.constprop.0+0x120/0x120
[198256.113556][ T7460] __x64_sys_fsync+0x45/0x70
[198256.114323][ T7460] do_syscall_64+0x5c/0xc0
[198256.115084][ T7460] ? syscall_exit_to_user_mode+0x3b/0x50
[198256.116030][ T7460] ? do_syscall_64+0x69/0xc0
[198256.116768][ T7460] ? do_syscall_64+0x69/0xc0
[198256.117555][ T7460] ? do_syscall_64+0x69/0xc0
[198256.118324][ T7460] ? sysvec_call_function_single+0x57/0xc0
[198256.119308][ T7460] ? asm_sysvec_call_function_single+0xa/0x20
[198256.120363][ T7460] entry_SYSCALL_64_after_hwframe+0x44/0xae
[198256.121334][ T7460] RIP: 0033:0x7fc7fe97b6ab
[198256.122067][ T7460] Code: 0f 05 48 (...)
[198256.125198][ T7460] RSP: 002b:00007fc7f7c23950 EFLAGS: 00000293 ORIG_RAX: 000000000000004a
[198256.126568][ T7460] RAX: ffffffffffffffda RBX: 00007fc7f7c239f0 RCX: 00007fc7fe97b6ab
[198256.127942][ T7460] RDX: 0000000000000002 RSI: 000056167536bcf0 RDI: 0000000000000004
[198256.129302][ T7460] RBP: 0000000000000004 R08: 0000000000000000 R09: 000000007ffffeb8
[198256.130670][ T7460] R10: 00000000000001ff R11: 0000000000000293 R12: 0000000000000001
[198256.132046][ T7460] R13: 0000561674ca8140 R14: 00007fc7f7c239d0 R15: 000056167536dab8
[198256.133403][ T7460] </TASK>
Fix this by treating -EEXIST as expected at insert_dir_log_key() and have
it update the item with an end offset corresponding to the maximum between
the previously logged end offset and the new requested end offset. The end
offsets may be different due to dir index key deletions that happened as
part of unlink operations while we are logging a directory (triggered when
fsyncing some other inode parented by the directory) or during renames
which always attempt to log a single dir index deletion.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/YmyefE9mc2xl5ZMz@hungrycats.org/
Fixes: 732d591a5d ("btrfs: stop copying old dir items when logging a directory")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_zone_activate() checks if it activated all the underlying zones in
the loop. However, that check never hit on an unlimited activate zone
device (max_active_zones == 0).
Fortunately, it still works without ENOSPC because btrfs_zone_activate()
returns true in the end, even if block_group->zone_is_active == 0. But, it
is confusing to have non zone_is_active block group still usable for
allocation. Also, we are wasting CPU time to iterate the loop every time
btrfs_zone_activate() is called for the blog groups.
Since error case in the loop is handled by out_unlock, we can just set
zone_is_active and do the list stuff after the loop.
Fixes: f9a912a3c4 ("btrfs: zoned: make zone activation multi stripe capable")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_zone_activate() checks if block_group->alloc_offset ==
block_group->zone_capacity every time it iterates the loop. But, it is
not depending on the index. Move out the check and do it only once.
Fixes: f9a912a3c4 ("btrfs: zoned: make zone activation multi stripe capable")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
For a 4K sector sized btrfs with v1 cache enabled and only mounted on
systems with 4K page size, if it's mounted on subpage (64K page size)
systems, it can cause the following warning on v1 space cache:
BTRFS error (device dm-1): csum mismatch on free space cache
BTRFS warning (device dm-1): failed to load free space cache for block group 84082688, rebuilding it now
Although not a big deal, as kernel can rebuild it without problem, such
warning will bother end users, especially if they want to switch the
same btrfs seamlessly between different page sized systems.
[CAUSE]
V1 free space cache is still using fixed PAGE_SIZE for various bitmap,
like BITS_PER_BITMAP.
Such hard-coded PAGE_SIZE usage will cause various mismatch, from v1
cache size to checksum.
Thus kernel will always reject v1 cache with a different PAGE_SIZE with
csum mismatch.
[FIX]
Although we should fix v1 cache, it's already going to be marked
deprecated soon.
And we have v2 cache based on metadata (which is already fully subpage
compatible), and it has almost everything superior than v1 cache.
So just force subpage mount to use v2 cache on mount.
Reported-by: Matt Corallo <blnxfsl@bluematt.me>
CC: stable@vger.kernel.org # 5.15+
Link: https://lore.kernel.org/linux-btrfs/61aa27d1-30fc-c1a9-f0f4-9df544395ec3@bluematt.me/
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=7k9f
-----END PGP SIGNATURE-----
Merge tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes mostly around how some file attributes could be set.
- fix handling of compression property:
- don't allow setting it on anything else than regular file or
directory
- do not allow setting it on nodatacow files via properties
- improved error handling when setting xattr
- make sure symlinks are always properly logged"
* tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: skip compression property for anything other than files and dirs
btrfs: do not BUG_ON() on failure to update inode when setting xattr
btrfs: always log symlinks in full mode
btrfs: do not allow compression on nodatacow files
btrfs: export a helper for compression hard check
The compression property only has effect on regular files and directories
(so that it's propagated to files and subdirectories created inside a
directory). For any other inode type (symlink, fifo, device, socket),
it's pointless to set the compression property because it does nothing
and ends up unnecessarily wasting leaf space due to the pointless xattr
(75 or 76 bytes, depending on the compression value). Symlinks in
particular are very common (for example, I have almost 10k symlinks under
/etc, /usr and /var alone) and therefore it's worth to avoid wasting
leaf space with the compression xattr.
For example, the compression property can end up on a symlink or character
device implicitly, through inheritance from a parent directory
$ mkdir /mnt/testdir
$ btrfs property set /mnt/testdir compression lzo
$ ln -s yadayada /mnt/testdir/lnk
$ mknod /mnt/testdir/dev c 0 0
Or explicitly like this:
$ ln -s yadayda /mnt/lnk
$ setfattr -h -n btrfs.compression -v lzo /mnt/lnk
So skip the compression property on inodes that are neither a regular
file nor a directory.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are doing a BUG_ON() if we fail to update an inode after setting (or
clearing) a xattr, but there's really no reason to not instead simply
abort the transaction and return the error to the caller. This should be
a rare error because we have previously reserved enough metadata space to
update the inode and the delayed inode should have already been setup, so
an -ENOSPC or -ENOMEM, which are the possible errors, are very unlikely to
happen.
So replace the BUG_ON()s with a transaction abort.
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On Linux, empty symlinks are invalid, and attempting to create one with
the system call symlink(2) results in an -ENOENT error and this is
explicitly documented in the man page.
If we rename a symlink that was created in the current transaction and its
parent directory was logged before, we actually end up logging the symlink
without logging its content, which is stored in an inline extent. That
means that after a power failure we can end up with an empty symlink,
having no content and an i_size of 0 bytes.
It can be easily reproduced like this:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/testdir
$ sync
# Create a file inside the directory and fsync the directory.
$ touch /mnt/testdir/foo
$ xfs_io -c "fsync" /mnt/testdir
# Create a symlink inside the directory and then rename the symlink.
$ ln -s /mnt/testdir/foo /mnt/testdir/bar
$ mv /mnt/testdir/bar /mnt/testdir/baz
# Now fsync again the directory, this persist the log tree.
$ xfs_io -c "fsync" /mnt/testdir
<power failure>
$ mount /dev/sdc /mnt
$ stat -c %s /mnt/testdir/baz
0
$ readlink /mnt/testdir/baz
$
Fix this by always logging symlinks in full mode (LOG_INODE_ALL), so that
their content is also logged.
A test case for fstests will follow.
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Compression and nodatacow are mutually exclusive. A similar issue was
fixed by commit f37c563bab ("btrfs: add missing check for nocow and
compression inode flags"). Besides ioctl, there is another way to
enable/disable/reset compression directly via xattr. The following
steps will result in a invalid combination.
$ touch bar
$ chattr +C bar
$ lsattr bar
---------------C-- bar
$ setfattr -n btrfs.compression -v zstd bar
$ lsattr bar
--------c------C-- bar
To align with the logic in check_fsflags, nocompress will also be
unacceptable after this patch, to prevent mix any compression-related
options with nodatacow.
$ touch bar
$ chattr +C bar
$ lsattr bar
---------------C-- bar
$ setfattr -n btrfs.compression -v zstd bar
setfattr: bar: Invalid argument
$ setfattr -n btrfs.compression -v no bar
setfattr: bar: Invalid argument
When both compression and nodatacow are enabled, then
btrfs_run_delalloc_range prefers nodatacow and no compression happens.
Reported-by: Jayce Lin <jaycelin@synology.com>
CC: stable@vger.kernel.org # 5.10.x: e6f9d69648: btrfs: export a helper for compression hard check
CC: stable@vger.kernel.org # 5.10.x
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
inode_can_compress will be used outside of inode.c to check the
availability of setting compression flag by xattr. This patch moves
this function as an internal helper and renames it to
btrfs_inode_can_compress.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=xDWz
-----END PGP SIGNATURE-----
Merge tag 'for-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- direct IO fixes:
- restore passing file offset to correctly calculate checksums
when repairing on read and bio split happens
- use correct bio when sumitting IO on zoned filesystem
- zoned mode fixes:
- fix selection of device to correctly calculate device
capabilities when allocating a new bio
- use a dedicated lock for exclusion during relocation
- fix leaked plug after failure syncing log
- fix assertion during scrub and relocation
* tag 'for-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: use dedicated lock for data relocation
btrfs: fix assertion failure during scrub due to block group reallocation
btrfs: fix direct I/O writes for split bios on zoned devices
btrfs: fix direct I/O read repair for split bios
btrfs: fix and document the zoned device choice in alloc_new_bio
btrfs: fix leaked plug after failure syncing log on zoned filesystems
Currently, we use btrfs_inode_{lock,unlock}() to grant an exclusive
writeback of the relocation data inode in
btrfs_zoned_data_reloc_{lock,unlock}(). However, that can cause a deadlock
in the following path.
Thread A takes btrfs_inode_lock() and waits for metadata reservation by
e.g, waiting for writeback:
prealloc_file_extent_cluster()
- btrfs_inode_lock(&inode->vfs_inode, 0);
- btrfs_prealloc_file_range()
...
- btrfs_replace_file_extents()
- btrfs_start_transaction
...
- btrfs_reserve_metadata_bytes()
Thread B (e.g, doing a writeback work) needs to wait for the inode lock to
continue writeback process:
do_writepages
- btrfs_writepages
- extent_writpages
- btrfs_zoned_data_reloc_lock(BTRFS_I(inode));
- btrfs_inode_lock()
The deadlock is caused by relying on the vfs_inode's lock. By using it, we
introduced unnecessary exclusion of writeback and
btrfs_prealloc_file_range(). Also, the lock at this point is useless as we
don't have any dirty pages in the inode yet.
Introduce fs_info->zoned_data_reloc_io_lock and use it for the exclusive
writeback.
Fixes: 35156d8527 ("btrfs: zoned: only allow one process to add pages to a relocation inode")
CC: stable@vger.kernel.org # 5.16.x: 869f4cdc73: btrfs: zoned: encapsulate inode locking for zoned relocation
CC: stable@vger.kernel.org # 5.16.x
CC: stable@vger.kernel.org # 5.17
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During a scrub, or device replace, we can race with block group removal
and allocation and trigger the following assertion failure:
[7526.385524] assertion failed: cache->start == chunk_offset, in fs/btrfs/scrub.c:3817
[7526.387351] ------------[ cut here ]------------
[7526.387373] kernel BUG at fs/btrfs/ctree.h:3599!
[7526.388001] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[7526.388970] CPU: 2 PID: 1158150 Comm: btrfs Not tainted 5.17.0-rc8-btrfs-next-114 #4
[7526.390279] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[7526.392430] RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs]
[7526.393520] Code: f3 48 c7 c7 20 (...)
[7526.396926] RSP: 0018:ffffb9154176bc40 EFLAGS: 00010246
[7526.397690] RAX: 0000000000000048 RBX: ffffa0db8a910000 RCX: 0000000000000000
[7526.398732] RDX: 0000000000000000 RSI: ffffffff9d7239a2 RDI: 00000000ffffffff
[7526.399766] RBP: ffffa0db8a911e10 R08: ffffffffa71a3ca0 R09: 0000000000000001
[7526.400793] R10: 0000000000000001 R11: 0000000000000000 R12: ffffa0db4b170800
[7526.401839] R13: 00000003494b0000 R14: ffffa0db7c55b488 R15: ffffa0db8b19a000
[7526.402874] FS: 00007f6c99c40640(0000) GS:ffffa0de6d200000(0000) knlGS:0000000000000000
[7526.404038] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[7526.405040] CR2: 00007f31b0882160 CR3: 000000014b38c004 CR4: 0000000000370ee0
[7526.406112] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[7526.407148] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[7526.408169] Call Trace:
[7526.408529] <TASK>
[7526.408839] scrub_enumerate_chunks.cold+0x11/0x79 [btrfs]
[7526.409690] ? do_wait_intr_irq+0xb0/0xb0
[7526.410276] btrfs_scrub_dev+0x226/0x620 [btrfs]
[7526.410995] ? preempt_count_add+0x49/0xa0
[7526.411592] btrfs_ioctl+0x1ab5/0x36d0 [btrfs]
[7526.412278] ? __fget_files+0xc9/0x1b0
[7526.412825] ? kvm_sched_clock_read+0x14/0x40
[7526.413459] ? lock_release+0x155/0x4a0
[7526.414022] ? __x64_sys_ioctl+0x83/0xb0
[7526.414601] __x64_sys_ioctl+0x83/0xb0
[7526.415150] do_syscall_64+0x3b/0xc0
[7526.415675] entry_SYSCALL_64_after_hwframe+0x44/0xae
[7526.416408] RIP: 0033:0x7f6c99d34397
[7526.416931] Code: 3c 1c e8 1c ff (...)
[7526.419641] RSP: 002b:00007f6c99c3fca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[7526.420735] RAX: ffffffffffffffda RBX: 00005624e1e007b0 RCX: 00007f6c99d34397
[7526.421779] RDX: 00005624e1e007b0 RSI: 00000000c400941b RDI: 0000000000000003
[7526.422820] RBP: 0000000000000000 R08: 00007f6c99c40640 R09: 0000000000000000
[7526.423906] R10: 00007f6c99c40640 R11: 0000000000000246 R12: 00007fff746755de
[7526.424924] R13: 00007fff746755df R14: 0000000000000000 R15: 00007f6c99c40640
[7526.425950] </TASK>
That assertion is relatively new, introduced with commit d04fbe19ae
("btrfs: scrub: cleanup the argument list of scrub_chunk()").
The block group we get at scrub_enumerate_chunks() can actually have a
start address that is smaller then the chunk offset we extracted from a
device extent item we got from the commit root of the device tree.
This is very rare, but it can happen due to a race with block group
removal and allocation. For example, the following steps show how this
can happen:
1) We are at transaction T, and we have the following blocks groups,
sorted by their logical start address:
[ bg A, start address A, length 1G (data) ]
[ bg B, start address B, length 1G (data) ]
(...)
[ bg W, start address W, length 1G (data) ]
--> logical address space hole of 256M,
there used to be a 256M metadata block group here
[ bg Y, start address Y, length 256M (metadata) ]
--> Y matches W's end offset + 256M
Block group Y is the block group with the highest logical address in
the whole filesystem;
2) Block group Y is deleted and its extent mapping is removed by the call
to remove_extent_mapping() made from btrfs_remove_block_group().
So after this point, the last element of the mapping red black tree,
its rightmost node, is the mapping for block group W;
3) While still at transaction T, a new data block group is allocated,
with a length of 1G. When creating the block group we do a call to
find_next_chunk(), which returns the logical start address for the
new block group. This calls returns X, which corresponds to the
end offset of the last block group, the rightmost node in the mapping
red black tree (fs_info->mapping_tree), plus one.
So we get a new block group that starts at logical address X and with
a length of 1G. It spans over the whole logical range of the old block
group Y, that was previously removed in the same transaction.
However the device extent allocated to block group X is not the same
device extent that was used by block group Y, and it also does not
overlap that extent, which must be always the case because we allocate
extents by searching through the commit root of the device tree
(otherwise it could corrupt a filesystem after a power failure or
an unclean shutdown in general), so the extent allocator is behaving
as expected;
4) We have a task running scrub, currently at scrub_enumerate_chunks().
There it searches for device extent items in the device tree, using
its commit root. It finds a device extent item that was used by
block group Y, and it extracts the value Y from that item into the
local variable 'chunk_offset', using btrfs_dev_extent_chunk_offset();
It then calls btrfs_lookup_block_group() to find block group for
the logical address Y - since there's currently no block group that
starts at that logical address, it returns block group X, because
its range contains Y.
This results in triggering the assertion:
ASSERT(cache->start == chunk_offset);
right before calling scrub_chunk(), as cache->start is X and
chunk_offset is Y.
This is more likely to happen of filesystems not larger than 50G, because
for these filesystems we use a 256M size for metadata block groups and
a 1G size for data block groups, while for filesystems larger than 50G,
we use a 1G size for both data and metadata block groups (except for
zoned filesystems). It could also happen on any filesystem size due to
the fact that system block groups are always smaller (32M) than both
data and metadata block groups, but these are not frequently deleted, so
much less likely to trigger the race.
So make scrub skip any block group with a start offset that is less than
the value we expect, as that means it's a new block group that was created
in the current transaction. It's pointless to continue and try to scrub
its extents, because scrub searches for extents using the commit root, so
it won't find any. For a device replace, skip it as well for the same
reasons, and we don't need to worry about the possibility of extents of
the new block group not being to the new device, because we have the write
duplication setup done through btrfs_map_block().
Fixes: d04fbe19ae ("btrfs: scrub: cleanup the argument list of scrub_chunk()")
CC: stable@vger.kernel.org # 5.17
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a bio is split in btrfs_submit_direct, dip->file_offset contains
the file offset for the first bio. But this means the start value used
in btrfs_end_dio_bio to record the write location for zone devices is
incorrect for subsequent bios.
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
When a bio is split in btrfs_submit_direct, dip->file_offset contains
the file offset for the first bio. But this means the start value used
in btrfs_check_read_dio_bio is incorrect for subsequent bios. Add
a file_offset field to struct btrfs_bio to pass along the correct offset.
Given that check_data_csum only uses start of an error message this
means problems with this miscalculation will only show up when I/O fails
or checksums mismatch.
The logic was removed in f4f39fc5dc ("btrfs: remove btrfs_bio::logical
member") but we need it due to the bio splitting.
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Zone Append bios only need a valid block device in struct bio, but
not the device in the btrfs_bio. Use the information from
btrfs_zoned_get_device to set up bi_bdev and fix zoned writes on
multi-device file system with non-homogeneous capabilities and remove
the pointless btrfs_bio.device assignment.
Add big fat comments explaining what is going on here.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
On a zoned filesystem, if we fail to allocate the root node for the log
root tree while syncing the log, we end up returning without finishing
the IO plug we started before, resulting in leaking resources as we
have started writeback for extent buffers of a log tree before. That
allocation failure, which typically is either -ENOMEM or -ENOSPC, is not
fatal and the fsync can safely fallback to a full transaction commit.
So release the IO plug if we fail to allocate the extent buffer for the
root of the log root tree when syncing the log on a zoned filesystem.
Fixes: 3ddebf27fc ("btrfs: zoned: reorder log node allocation on zoned filesystem")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=APMY
-----END PGP SIGNATURE-----
Merge tag 'for-5.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more code and warning fixes.
There's one feature ioctl removal patch slated for 5.18 that did not
make it to the main pull request. It's just a one-liner and the ioctl
has a v2 that's in use for a long time, no point to postpone it to
5.19.
Late update:
- remove balance v1 ioctl, superseded by v2 in 2012
Fixes:
- add back cgroup attribution for compressed writes
- add super block write start/end annotations to asynchronous balance
- fix root reference count on an error handling path
- in zoned mode, activate zone at the chunk allocation time to avoid
ENOSPC due to timing issues
- fix delayed allocation accounting for direct IO
Warning fixes:
- simplify assertion condition in zoned check
- remove an unused variable"
* tag 'for-5.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix btrfs_submit_compressed_write cgroup attribution
btrfs: fix root ref counts in error handling in btrfs_get_root_ref
btrfs: zoned: activate block group only for extent allocation
btrfs: return allocated block group from do_chunk_alloc()
btrfs: mark resumed async balance as writing
btrfs: remove support of balance v1 ioctl
btrfs: release correct delalloc amount in direct IO write path
btrfs: remove unused variable in btrfs_{start,write}_dirty_block_groups()
btrfs: zoned: remove redundant condition in btrfs_run_delalloc_range
This restores the logic from commit 46bcff2bfc ("btrfs: fix compressed
write bio blkcg attribution") which added cgroup attribution to btrfs
writeback. It also adds back the REQ_CGROUP_PUNT flag for these ios.
Fixes: 9150724048 ("btrfs: determine stripe boundary at bio allocation time in btrfs_submit_compressed_write")
CC: stable@vger.kernel.org # 5.16+
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_get_root_ref(), when btrfs_insert_fs_root() fails,
btrfs_put_root() can happen for two reasons:
- the root already exists in the tree, in that case it returns the
reference obtained in btrfs_lookup_fs_root()
- another error so the cleanup is done in the fail label
Calling btrfs_put_root() unconditionally would lead to double decrement
of the root reference possibly freeing it in the second case.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Fixes: bc44d7c4b2 ("btrfs: push btrfs_grab_fs_root into btrfs_get_fs_root")
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_make_block_group(), we activate the allocated block group,
expecting that the block group is soon used for allocation. However, the
chunk allocation from flush_space() context broke the assumption. There
can be a large time gap between the chunk allocation time and the extent
allocation time from the chunk.
Activating the empty block groups pre-allocated from flush_space()
context can exhaust the active zone counter of a device. Once we use all
the active zone counts for empty pre-allocated block groups, we cannot
activate new block group for the other things: metadata, tree-log, or
data relocation block group. That failure results in a fake -ENOSPC.
This patch introduces CHUNK_ALLOC_FORCE_FOR_EXTENT to distinguish the
chunk allocation from find_free_extent(). Now, the new block group is
activated only in that context.
Fixes: eb66a010d5 ("btrfs: zoned: activate new block group")
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Return the allocated block group from do_chunk_alloc(). This is a
preparation patch for the next patch.
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When btrfs balance is interrupted with umount, the background balance
resumes on the next mount. There is a potential deadlock with FS freezing
here like as described in commit 26559780b953 ("btrfs: zoned: mark
relocation as writing"). Mark the process as sb_writing to avoid it.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It was scheduled for removal in kernel v5.18 commit 6c405b2409
("btrfs: deprecate BTRFS_IOC_BALANCE ioctl") thus its time has come.
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Running generic/406 causes the following WARNING in btrfs_destroy_inode()
which tells there are outstanding extents left.
In btrfs_get_blocks_direct_write(), we reserve a temporary outstanding
extents with btrfs_delalloc_reserve_metadata() (or indirectly from
btrfs_delalloc_reserve_space(()). We then release the outstanding extents
with btrfs_delalloc_release_extents(). However, the "len" can be modified
in the COW case, which releases fewer outstanding extents than expected.
Fix it by calling btrfs_delalloc_release_extents() for the original length.
To reproduce the warning, the filesystem should be 1 GiB. It's
triggering a short-write, due to not being able to allocate a large
extent and instead allocating a smaller one.
WARNING: CPU: 0 PID: 757 at fs/btrfs/inode.c:8848 btrfs_destroy_inode+0x1e6/0x210 [btrfs]
Modules linked in: btrfs blake2b_generic xor lzo_compress
lzo_decompress raid6_pq zstd zstd_decompress zstd_compress xxhash zram
zsmalloc
CPU: 0 PID: 757 Comm: umount Not tainted 5.17.0-rc8+ #101
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS d55cb5a 04/01/2014
RIP: 0010:btrfs_destroy_inode+0x1e6/0x210 [btrfs]
RSP: 0018:ffffc9000327bda8 EFLAGS: 00010206
RAX: 0000000000000000 RBX: ffff888100548b78 RCX: 0000000000000000
RDX: 0000000000026900 RSI: 0000000000000000 RDI: ffff888100548b78
RBP: ffff888100548940 R08: 0000000000000000 R09: ffff88810b48aba8
R10: 0000000000000001 R11: ffff8881004eb240 R12: ffff88810b48a800
R13: ffff88810b48ec08 R14: ffff88810b48ed00 R15: ffff888100490c68
FS: 00007f8549ea0b80(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f854a09e733 CR3: 000000010a2e9003 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
destroy_inode+0x33/0x70
dispose_list+0x43/0x60
evict_inodes+0x161/0x1b0
generic_shutdown_super+0x2d/0x110
kill_anon_super+0xf/0x20
btrfs_kill_super+0xd/0x20 [btrfs]
deactivate_locked_super+0x27/0x90
cleanup_mnt+0x12c/0x180
task_work_run+0x54/0x80
exit_to_user_mode_prepare+0x152/0x160
syscall_exit_to_user_mode+0x12/0x30
do_syscall_64+0x42/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f854a000fb7
Fixes: f0bfa76a11 ("btrfs: fix ENOSPC failure when attempting direct IO write into NOCOW range")
CC: stable@vger.kernel.org # 5.17
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Clang's version of -Wunused-but-set-variable recently gained support for
unary operations, which reveals two unused variables:
fs/btrfs/block-group.c:2949:6: error: variable 'num_started' set but not used [-Werror,-Wunused-but-set-variable]
int num_started = 0;
^
fs/btrfs/block-group.c:3116:6: error: variable 'num_started' set but not used [-Werror,-Wunused-but-set-variable]
int num_started = 0;
^
2 errors generated.
These variables appear to be unused from their introduction, so just
remove them to silence the warnings.
Fixes: c9dc4c6578 ("Btrfs: two stage dirty block group writeout")
Fixes: 1bbc621ef2 ("Btrfs: allow block group cache writeout outside critical section in commit")
CC: stable@vger.kernel.org # 5.4+
Link: https://github.com/ClangBuiltLinux/linux/issues/1614
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
The logic !A || A && B is equivalent to !A || B. so we can
make code clear.
Note: though it's preferred to be in the more human readable form, there
have been repeated reports and patches as the expression is detected by
tools so apply it to reduce the load.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note ]
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=XZaw
-----END PGP SIGNATURE-----
Merge tag 'for-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- prevent deleting subvolume with active swapfile
- fix qgroup reserve limit calculation overflow
- remove device count in superblock and its item in one transaction so
they cant't get out of sync
- skip defragmenting an isolated sector, this could cause some extra IO
- unify handling of mtime/permissions in hole punch with fallocate
- zoned mode fixes:
- remove assert checking for only single mode, we have the
DUP mode implemented
- fix potential lockdep warning while traversing devices
when checking for zone activation
* tag 'for-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: prevent subvol with swapfile from being deleted
btrfs: do not warn for free space inode in cow_file_range
btrfs: avoid defragging extents whose next extents are not targets
btrfs: fix fallocate to use file_modified to update permissions consistently
btrfs: remove device item and update super block in the same transaction
btrfs: fix qgroup reserve overflow the qgroup limit
btrfs: zoned: remove left over ASSERT checking for single profile
btrfs: zoned: traverse devices under chunk_mutex in btrfs_can_activate_zone
While btrfs doesn't use large folios yet, this should have been changed
as part of the conversion from invalidatepage to invalidate_folio.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
All filesystems have now been converted to use ->readahead, so
remove the ->readpages operation and fix all the comments that
used to refer to it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----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=efaq
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block
Pull NVMe write streams removal from Jens Axboe:
"This removes the write streams support in NVMe. No vendor ever really
shipped working support for this, and they are not interested in
supporting it.
With the NVMe support gone, we have nothing in the tree that supports
this. Remove passing around of the hints.
The only discussion point in this patchset imho is the fact that the
file specific write hint setting/getting fcntl helpers will now return
-1/EINVAL like they did before we supported write hints. No known
applications use these functions, I only know of one prototype that I
help do for RocksDB, and that's not used. That said, with a change
like this, it's always a bit controversial. Alternatively, we could
just make them return 0 and pretend it worked. It's placement based
hints after all"
* tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block:
fs: remove fs.f_write_hint
fs: remove kiocb.ki_hint
block: remove the per-bio/request write hint
nvme: remove support or stream based temperature hint
Linus pointed out the benefits of C99 some years ago, especially variable
declarations in loops [1]. At that time, we were not ready for the
migration due to old compilers.
Recently, Jakob Koschel reported a bug in list_for_each_entry(), which
leaks the invalid pointer out of the loop [2]. In the discussion, we
agreed that the time had come. Now that GCC 5.1 is the minimum compiler
version, there is nothing to prevent us from going to -std=gnu99, or even
straight to -std=gnu11.
Discussions for a better list iterator implementation are ongoing, but
this patch set must land first.
[1] https://lore.kernel.org/all/CAHk-=wgr12JkKmRd21qh-se-_Gs69kbPgR9x4C+Es-yJV2GLkA@mail.gmail.com/
[2] https://lore.kernel.org/lkml/86C4CE7D-6D93-456B-AA82-F8ADEACA40B7@gmail.com/
-----BEGIN PGP SIGNATURE-----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=KMDk
-----END PGP SIGNATURE-----
Merge tag 'kbuild-gnu11-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild update for C11 language base from Masahiro Yamada:
"Kbuild -std=gnu11 updates for v5.18
Linus pointed out the benefits of C99 some years ago, especially
variable declarations in loops [1]. At that time, we were not ready
for the migration due to old compilers.
Recently, Jakob Koschel reported a bug in list_for_each_entry(), which
leaks the invalid pointer out of the loop [2]. In the discussion, we
agreed that the time had come. Now that GCC 5.1 is the minimum
compiler version, there is nothing to prevent us from going to
-std=gnu99, or even straight to -std=gnu11.
Discussions for a better list iterator implementation are ongoing, but
this patch set must land first"
[1] https://lore.kernel.org/all/CAHk-=wgr12JkKmRd21qh-se-_Gs69kbPgR9x4C+Es-yJV2GLkA@mail.gmail.com/
[2] https://lore.kernel.org/lkml/86C4CE7D-6D93-456B-AA82-F8ADEACA40B7@gmail.com/
* tag 'kbuild-gnu11-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Kbuild: use -std=gnu11 for KBUILD_USERCFLAGS
Kbuild: move to -std=gnu11
Kbuild: use -Wdeclaration-after-statement
Kbuild: add -Wno-shift-negative-value where -Wextra is used
A subvolume with an active swapfile must not be deleted otherwise it
would not be possible to deactivate it.
After the subvolume is deleted, we cannot swapoff the swapfile in this
deleted subvolume because the path is unreachable. The swapfile is
still active and holding references, the filesystem cannot be unmounted.
The test looks like this:
mkfs.btrfs -f $dev > /dev/null
mount $dev $mnt
btrfs sub create $mnt/subvol
touch $mnt/subvol/swapfile
chmod 600 $mnt/subvol/swapfile
chattr +C $mnt/subvol/swapfile
dd if=/dev/zero of=$mnt/subvol/swapfile bs=1K count=4096
mkswap $mnt/subvol/swapfile
swapon $mnt/subvol/swapfile
btrfs sub delete $mnt/subvol
swapoff $mnt/subvol/swapfile # failed: No such file or directory
swapoff --all
unmount $mnt # target is busy.
To prevent above issue, we simply check that whether the subvolume
contains any active swapfile, and stop the deleting process. This
behavior is like snapshot ioctl dealing with a swapfile.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Kaiwen Hu <kevinhu@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a long time leftover from when I originally added the free space
inode, the point was to catch cases where we weren't honoring the NOCOW
flag. However there exists a race with relocation, if we allocate our
free space inode in a block group that is about to be relocated, we
could trigger the COW path before the relocation has the opportunity to
find the extents and delete the free space cache. In production where
we have auto-relocation enabled we're seeing this WARN_ON_ONCE() around
5k times in a 2 week period, so not super common but enough that it's at
the top of our metrics.
We're properly handling the error here, and with us phasing out v1 space
cache anyway just drop the WARN_ON_ONCE.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a report that autodefrag is defragging single sector, which
is completely waste of IO, and no help for defragging:
btrfs-cleaner-808 defrag_one_locked_range: root=256 ino=651122 start=0 len=4096
[CAUSE]
In defrag_collect_targets(), we check if the current range (A) can be merged
with next one (B).
If mergeable, we will add range A into target for defrag.
However there is a catch for autodefrag, when checking mergeability
against range B, we intentionally pass 0 as @newer_than, hoping to get a
higher chance to merge with the next extent.
But in the next iteration, range B will looked up by defrag_lookup_extent(),
with non-zero @newer_than.
And if range B is not really newer, it will rejected directly, causing
only range A being defragged, while we expect to defrag both range A and
B.
[FIX]
Since the root cause is the difference in check condition of
defrag_check_next_extent() and defrag_collect_targets(), we fix it by:
1. Pass @newer_than to defrag_check_next_extent()
2. Pass @extent_thresh to defrag_check_next_extent()
This makes the check between defrag_collect_targets() and
defrag_check_next_extent() more consistent.
While there is still some minor difference, the remaining checks are
focus on runtime flags like writeback/delalloc, which are mostly
transient and safe to be checked only in defrag_collect_targets().
Link: https://github.com/btrfs/linux/issues/423#issuecomment-1066981856
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files. This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero range). Because the call can be used to change file contents, we
should treat it like we do any other modification to a file -- update
the mtime, and drop set[ug]id privileges/capabilities.
The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a report that a btrfs has a bad super block num devices.
This makes btrfs to reject the fs completely.
BTRFS error (device sdd3): super_num_devices 3 mismatch with num_devices 2 found here
BTRFS error (device sdd3): failed to read chunk tree: -22
BTRFS error (device sdd3): open_ctree failed
[CAUSE]
During btrfs device removal, chunk tree and super block num devs are
updated in two different transactions:
btrfs_rm_device()
|- btrfs_rm_dev_item(device)
| |- trans = btrfs_start_transaction()
| | Now we got transaction X
| |
| |- btrfs_del_item()
| | Now device item is removed from chunk tree
| |
| |- btrfs_commit_transaction()
| Transaction X got committed, super num devs untouched,
| but device item removed from chunk tree.
| (AKA, super num devs is already incorrect)
|
|- cur_devices->num_devices--;
|- cur_devices->total_devices--;
|- btrfs_set_super_num_devices()
All those operations are not in transaction X, thus it will
only be written back to disk in next transaction.
So after the transaction X in btrfs_rm_dev_item() committed, but before
transaction X+1 (which can be minutes away), a power loss happen, then
we got the super num mismatch.
[FIX]
Instead of starting and committing a transaction inside
btrfs_rm_dev_item(), start a transaction in side btrfs_rm_device() and
pass it to btrfs_rm_dev_item().
And only commit the transaction after everything is done.
Reported-by: Luca Béla Palkovics <luca.bela.palkovics@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+8xDSpvdm_U0QLBAnrH=zqDq_cWCOH5TiV46CKmp3igr44okQ@mail.gmail.com/
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use extent_changeset->bytes_changed in qgroup_reserve_data() to record
how many bytes we set for EXTENT_QGROUP_RESERVED state. Currently the
bytes_changed is set as "unsigned int", and it will overflow if we try to
fallocate a range larger than 4GiB. The result is we reserve less bytes
and eventually break the qgroup limit.
Unlike regular buffered/direct write, which we use one changeset for
each ordered extent, which can never be larger than 256M. For
fallocate, we use one changeset for the whole range, thus it no longer
respects the 256M per extent limit, and caused the problem.
The following example test script reproduces the problem:
$ cat qgroup-overflow.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Set qgroup limit to 2GiB.
btrfs quota enable $MNT
btrfs qgroup limit 2G $MNT
# Try to fallocate a 3GiB file. This should fail.
echo
echo "Try to fallocate a 3GiB file..."
fallocate -l 3G $MNT/3G.file
# Try to fallocate a 5GiB file.
echo
echo "Try to fallocate a 5GiB file..."
fallocate -l 5G $MNT/5G.file
# See we break the qgroup limit.
echo
sync
btrfs qgroup show -r $MNT
umount $MNT
When running the test:
$ ./qgroup-overflow.sh
(...)
Try to fallocate a 3GiB file...
fallocate: fallocate failed: Disk quota exceeded
Try to fallocate a 5GiB file...
qgroupid rfer excl max_rfer
-------- ---- ---- --------
0/5 5.00GiB 5.00GiB 2.00GiB
Since we have no control of how bytes_changed is used, it's better to
set it to u64.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Ethan Lien <ethanlien@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With commit dcf5652291f6 ("btrfs: zoned: allow DUP on meta-data block
groups") we started allowing DUP on metadata block groups, so the
ASSERT()s in btrfs_can_activate_zone() and btrfs_zoned_get_device() are
no longer valid and in fact even harmful.
Fixes: dcf5652291f6 ("btrfs: zoned: allow DUP on meta-data block groups")
CC: stable@vger.kernel.org # 5.17
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_can_activate_zone() can be called with the device_list_mutex already
held, which will lead to a deadlock:
insert_dev_extents() // Takes device_list_mutex
`-> insert_dev_extent()
`-> btrfs_insert_empty_item()
`-> btrfs_insert_empty_items()
`-> btrfs_search_slot()
`-> btrfs_cow_block()
`-> __btrfs_cow_block()
`-> btrfs_alloc_tree_block()
`-> btrfs_reserve_extent()
`-> find_free_extent()
`-> find_free_extent_update_loop()
`-> can_allocate_chunk()
`-> btrfs_can_activate_zone() // Takes device_list_mutex again
Instead of using the RCU on fs_devices->device_list we
can use fs_devices->alloc_list, protected by the chunk_mutex to traverse
the list of active devices.
We are in the chunk allocation thread. The newer chunk allocation
happens from the devices in the fs_device->alloc_list protected by the
chunk_mutex.
btrfs_create_chunk()
lockdep_assert_held(&info->chunk_mutex);
gather_device_info
list_for_each_entry(device, &fs_devices->alloc_list, dev_alloc_list)
Also, a device that reappears after the mount won't join the alloc_list
yet and, it will be in the dev_list, which we don't want to consider in
the context of the chunk alloc.
[15.166572] WARNING: possible recursive locking detected
[15.167117] 5.17.0-rc6-dennis #79 Not tainted
[15.167487] --------------------------------------------
[15.167733] kworker/u8:3/146 is trying to acquire lock:
[15.167733] ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: find_free_extent+0x15a/0x14f0 [btrfs]
[15.167733]
[15.167733] but task is already holding lock:
[15.167733] ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_create_pending_block_groups+0x20a/0x560 [btrfs]
[15.167733]
[15.167733] other info that might help us debug this:
[15.167733] Possible unsafe locking scenario:
[15.167733]
[15.171834] CPU0
[15.171834] ----
[15.171834] lock(&fs_devs->device_list_mutex);
[15.171834] lock(&fs_devs->device_list_mutex);
[15.171834]
[15.171834] *** DEADLOCK ***
[15.171834]
[15.171834] May be due to missing lock nesting notation
[15.171834]
[15.171834] 5 locks held by kworker/u8:3/146:
[15.171834] #0: ffff888100050938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1c3/0x5a0
[15.171834] #1: ffffc9000067be80 ((work_completion)(&fs_info->async_data_reclaim_work)){+.+.}-{0:0}, at: process_one_work+0x1c3/0x5a0
[15.176244] #2: ffff88810521e620 (sb_internal){.+.+}-{0:0}, at: flush_space+0x335/0x600 [btrfs]
[15.176244] #3: ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_create_pending_block_groups+0x20a/0x560 [btrfs]
[15.176244] #4: ffff8881152e4b78 (btrfs-dev-00){++++}-{3:3}, at: __btrfs_tree_lock+0x27/0x130 [btrfs]
[15.179641]
[15.179641] stack backtrace:
[15.179641] CPU: 1 PID: 146 Comm: kworker/u8:3 Not tainted 5.17.0-rc6-dennis #79
[15.179641] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014
[15.179641] Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
[15.179641] Call Trace:
[15.179641] <TASK>
[15.179641] dump_stack_lvl+0x45/0x59
[15.179641] __lock_acquire.cold+0x217/0x2b2
[15.179641] lock_acquire+0xbf/0x2b0
[15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs]
[15.183838] __mutex_lock+0x8e/0x970
[15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs]
[15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs]
[15.183838] ? lock_is_held_type+0xd7/0x130
[15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs]
[15.183838] find_free_extent+0x15a/0x14f0 [btrfs]
[15.183838] ? _raw_spin_unlock+0x24/0x40
[15.183838] ? btrfs_get_alloc_profile+0x106/0x230 [btrfs]
[15.187601] btrfs_reserve_extent+0x131/0x260 [btrfs]
[15.187601] btrfs_alloc_tree_block+0xb5/0x3b0 [btrfs]
[15.187601] __btrfs_cow_block+0x138/0x600 [btrfs]
[15.187601] btrfs_cow_block+0x10f/0x230 [btrfs]
[15.187601] btrfs_search_slot+0x55f/0xbc0 [btrfs]
[15.187601] ? lock_is_held_type+0xd7/0x130
[15.187601] btrfs_insert_empty_items+0x2d/0x60 [btrfs]
[15.187601] btrfs_create_pending_block_groups+0x2b3/0x560 [btrfs]
[15.187601] __btrfs_end_transaction+0x36/0x2a0 [btrfs]
[15.192037] flush_space+0x374/0x600 [btrfs]
[15.192037] ? find_held_lock+0x2b/0x80
[15.192037] ? btrfs_async_reclaim_data_space+0x49/0x180 [btrfs]
[15.192037] ? lock_release+0x131/0x2b0
[15.192037] btrfs_async_reclaim_data_space+0x70/0x180 [btrfs]
[15.192037] process_one_work+0x24c/0x5a0
[15.192037] worker_thread+0x4a/0x3d0
Fixes: a85f05e59b ("btrfs: zoned: avoid chunk allocation if active block group has enough space")
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Primarily this series converts some of the address_space operations
to take a folio instead of a page.
->is_partially_uptodate() takes a folio instead of a page and changes the
type of the 'from' and 'count' arguments to make it obvious they're bytes.
->invalidatepage() becomes ->invalidate_folio() and has a similar type change.
->launder_page() becomes ->launder_folio()
->set_page_dirty() becomes ->dirty_folio() and adds the address_space as
an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4hqMACgkQDpNsjXcp
gj7r7Af/fVJ7m8kKqjP/IayX3HiJRuIDQw+vM++BlRNXdjz+IyED6whdmFGxJeOY
BMyT+8ApOAz7ErS4G+7fAv4ScJK/aEgFUsnSeAiCp0PliiEJ5NNJzElp6sVmQ7H5
SX7+Ek444FZUGsQuy0qL7/ELpR3ditnD7x+5U2g0p5TeaHGUQn84crRyfR4xuhNG
EBD9D71BOb7OxUcOHe93pTkK51QsQ0aCrcIsB1tkK5KR0BAthn1HqF7ehL90Rvrr
omx5M7aDWGY4oj7IKrhlAs+55Ah2WaOzrZBp0FXNbr4UENDBKWKyUxErwa4xPkf6
Gm1iQG/CspOHnxN3YWsd5WjtlL3A+A==
=cOiq
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache
Pull filesystem folio updates from Matthew Wilcox:
"Primarily this series converts some of the address_space operations to
take a folio instead of a page.
Notably:
- a_ops->is_partially_uptodate() takes a folio instead of a page and
changes the type of the 'from' and 'count' arguments to make it
obvious they're bytes.
- a_ops->invalidatepage() becomes ->invalidate_folio() and has a
similar type change.
- a_ops->launder_page() becomes ->launder_folio()
- a_ops->set_page_dirty() becomes ->dirty_folio() and adds the
address_space as an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request"
* tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits)
fs: Remove aops ->set_page_dirty
fb_defio: Use noop_dirty_folio()
fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio
fs: Convert __set_page_dirty_buffers to block_dirty_folio
nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio()
mm: Convert swap_set_page_dirty() to swap_dirty_folio()
ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio
f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio
f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio
f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio
afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio()
btrfs: Convert extent_range_redirty_for_io() to use folios
fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio
btrfs: Convert from set_page_dirty to dirty_folio
fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio()
fs: Add aops->dirty_folio
fs: Remove aops->launder_page
orangefs: Convert launder_page to launder_folio
nfs: Convert from launder_page to launder_folio
fuse: Convert from launder_page to launder_folio
...
The inode allocation is supposed to use alloc_inode_sb(), so convert
kmem_cache_alloc() of all filesystems to alloc_inode_sb().
Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Theodore Ts'o <tytso@mit.edu> [ext4]
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmI44SgACgkQxWXV+ddt
WDtzyg//YgMKr05jRsU3I/pIQ9znuKZmmllThwF63ZRG4PvKz2QfzvKdrMuzNjru
5kHbG59iJqtLmU/aVsdp8mL6mmg5U3Ym2bIRsrW5m4HTtTowKdirvL/lQ3/tWm8j
CSDJhUdCL2SwFjpru+4cxOeHLXNSfsk4BoCu8nsLitL+oXv/EPo/dkmu6nPjiMY3
RjsIDBeDEf7J20KOuP/qJuN2YOAT7TeISPD3Ow4aDsmndWQ8n6KehEmAZb7QuqZQ
SYubZ2wTb9HuPH/qpiTIA7innBIr+JkYtUYlz2xxixM2BUWNfqD6oKHw9RgOY5Sg
CULFssw0i7cgGKsvuPJw1zdM002uG4wwXKigGiyljTVWvxneyr4mNDWiGad+LyFJ
XWhnABPidkLs/1zbUkJ23DVub5VlfZsypkFDJAUXI0nGu3VrhjDfTYMa8eCe2L/F
YuGG6CrAC+5K/arKAWTVj7hOb+52UzBTEBJz60LJJ6dS9eQoBy857V6pfo7w7ukZ
t/tqA6q75O4tk/G3Ix3V1CjuAH3kJE6qXrvBxhpu8aZNjofopneLyGqS5oahpcE8
8edtT+ZZhNuU9sLSEJCJATVxXRDdNzpQ8CHgOR5HOUbmM/vwKNzHPfRQzDnImznw
UaUlFaaHwK17M6Y/6CnMecz26U2nVSJ7pyh39mb784XYe2a1efE=
=YARd
-----END PGP SIGNATURE-----
Merge tag 'for-5.18-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This contains feature updates, performance improvements, preparatory
and core work and some related VFS updates:
Features:
- encoded read/write ioctls, allows user space to read or write raw
data directly to extents (now compressed, encrypted in the future),
will be used by send/receive v2 where it saves processing time
- zoned mode now works with metadata DUP (the mkfs.btrfs default)
- error message header updates:
- print error state: transaction abort, other error, log tree
errors
- print transient filesystem state: remount, device replace,
ignored checksum verifications
- tree-checker: verify the transaction id of the to-be-written dirty
extent buffer
Performance improvements for fsync:
- directory logging speedups (up to -90% run time)
- avoid logging all directory changes during renames (up to -60% run
time)
- avoid inode logging during rename and link when possible (up to
-60% run time)
- prepare extents to be logged before locking a log tree path
(throughput +7%)
- stop copying old file extents when doing a full fsync()
- improved logging of old extents after truncate
Core, fixes:
- improved stale device identification by dev_t and not just path
(for devices that are behind other layers like device mapper)
- continued extent tree v2 preparatory work
- disable features that won't work yet
- add wrappers and abstractions for new tree roots
- improved error handling
- add super block write annotations around background block group
reclaim
- fix device scanning messages potentially accessing stale pointer
- cleanups and refactoring
VFS:
- allow reflinks/deduplication from two different mounts of the same
filesystem
- export and add helpers for read/write range verification, for the
encoded ioctls"
* tag 'for-5.18-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (98 commits)
btrfs: zoned: put block group after final usage
btrfs: don't access possibly stale fs_info data in device_list_add
btrfs: add lockdep_assert_held to need_preemptive_reclaim
btrfs: verify the tranisd of the to-be-written dirty extent buffer
btrfs: unify the error handling of btrfs_read_buffer()
btrfs: unify the error handling pattern for read_tree_block()
btrfs: factor out do_free_extent_accounting helper
btrfs: remove last_ref from the extent freeing code
btrfs: add a alloc_reserved_extent helper
btrfs: remove BUG_ON(ret) in alloc_reserved_tree_block
btrfs: add and use helper for unlinking inode during log replay
btrfs: extend locking to all space_info members accesses
btrfs: zoned: mark relocation as writing
fs: allow cross-vfsmount reflink/dedupe
btrfs: remove the cross file system checks from remap
btrfs: pass btrfs_fs_info to btrfs_recover_relocation
btrfs: pass btrfs_fs_info for deleting snapshots and cleaner
btrfs: add filesystems state details to error messages
btrfs: deal with unexpected extent type during reflinking
btrfs: fix unexpected error path when reflinking an inline extent
...
This removes a call to __set_page_dirty_nobuffers().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
These filesystems use __set_page_dirty_nobuffers() either directly or
with a very thin wrapper; convert them en masse.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Optimise the non-DEBUG case to just call filemap_dirty_folio
directly. The DEBUG case doesn't actually compile, but convert
it to dirty_folio anyway.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
